7/26/2019 51240_B

1/4

Appl ication Note 51240(Revision B, 7/2010)

Software Products

Appl ication Software

NameWoodward

Part No. Descript ionHardwarePlatform Features Comments

ProducSpec

GAP

Programmer(1 seat)

8928-810 Graphical Application

Program is a functional blocksoftware used to build customcontrol systems. Once thecontrol logic is entered usingthe program's graphicalprogramming environment,the GAP software complierfunction generates code (viathe GAP coder) that isdownloaded to the targethardware to run the control.Note: Most Service Toolssuch as Control Assistant andWatch Window Pro reside in

GAP and are activated withdownload licenses.

MicroNet,

MicroNetTMR, Atlas,2300, 733

1. Self documenting

2. All function blocks areprogrammed to run every 5,10, 20 etc. ms, giving thismultitasking operatingsystem a guaranteed updaterate.3. Multiple GAP sections ofcontrol logic and algorithmscan be created andcontrolled by differententities, then compiled into asingle program for unitcontrol.4. Each functional block is

independent eliminatingunwanted interaction.5. Internal Woodward ladderlogic

Microsoft

C/C++ 6.0compilerrequired tocode GAPapplicationson a MicroNetPentium CPU.Mustpurchase alicense toactivate andthendownloadedfrom website

or purchasedCD.

03216

GAP ReadOnly

Programmer& GAP DemoProgrammer

none Read Only GAP only allowsviewing of GAP programs anddoes not support makingprogram changes. Demo GAPallows creating andmodifications to GAPprograms, but does notsupport compiling code.

MicroNet,Atlas, 2300,

733

Demo GAP reverts to ReadOnly GAP after 180 days.

No licenserequired.

MicrosoftC/C++ 6.0Compiler

1796-046 Used to successfully compileGAP coder 3.00 or higher forapplications in MicroNetPentium CPUs that use NToperating systems.

MicroNet GAPMustpurchase alicense toactivate andthendownloadedfrompurchasedCD.

MultiprogInstall Kit /Sequence

Logic Editor

1796-1070 Used to create and changesequence based applicationprograms in specific Atlas PCand GTC controls.

AtlasPC &GTC

controls

Only usable and compatiblewith GAP Programmer 3.06or greater programs.

Mustpurchase aCD kit.

03296

ABLS 9927-1272 Used to create and changeapplication programs in 723and 828 controllers.

723 & 828 Mustpurchase alicense toactivate andthendownloadedfrom websiteor purchasedCD.

7/26/2019 51240_B

2/4

Service Tools

NameWoodward

Part No. Descript ionHardwarePlatform Features Comments

ProductSpec

App-Manager

Free software managementtool that facilitates uploadingand downloading GAPassociated software.

MicroNet,AtlasPC

Download forfree fromWoodwardwebsite. Nolicenserequired.

MonitorGAP

8928-5007 Allows GAP users to view andedit runtime values in GAPapplication programs whenconnected to a control, orrunning NetSim tools.

MicroNet,MicroNet

TMR, Atlas,723, 733,828, 2300

Monitor GAP works inparallel with the GAPgraphical display andsuperimposes the actualruntime values into thatdisplay environment. It isembedded in GAPProgrammer version 3.05 orhigher, and GAP Editor 2.14or higher install programs.Watch Windows standardcomes embedded inMonitor-GAP.

Users of GAP2.13 or lowerand ABLS 4.0programsmust firstupdate theirGAP Editor toGAP 2.14 orhigher beforeusing this tool.Mustpurchase alicense toactivate.Comes with

GAP.

03306

WatchWindow II

8928-801 Allows users access to theService, Configure, andDebug modes of a Woodwardconfigurable digital control viaEthernet.

MicroNet,AtlasPC

An engineering andtroubleshooting tool, typicallyused only by serviceengineers for viewing theDebug variables in the GAPsoftware.

This softwareis not neededby most end-users fornormal use.Mustpurchase alicense toactivate andthendownloadedfrom websiteor CD.

03220

ControlAss istant 8928-101 Used to monitor high-speedDatalog files created in Atlas,MicroNet, and MicroNet TMR.

MicroNet,MicroNetTMR,

AtlasPC

Mustpurchase alicense toactivate andthendownloadedfrompurchasedCD.

03201

7/26/2019 51240_B

3/4

Service Tools (continued)

DatalogRetrieval

Tool Basic

8928-5008 The Datalog Retrievalfunctionality, once enabled in

AppManager, performsautomatic archiving ofDatalog files generated onone to three controlsconnected by a network. Thecollected files are givenunique names based uponthe original file name, the lasttime of modification, and thesource control. For 1 to 3controls.

MicroNet,Atlas

The AppManager Program'sDatalog Retrieval Function isembedded in AppManagerversion 2.2 or higherprograms. It is a service toolprogram used to downloadprograms utilized withMicroNet and Atlas controlscommunicating via Ethernetcommunications.

Free featureof

AppManager.No licenserequired forup to 3controls.

DatalogRetrieval

ToolEnterprise

8928-5009 The Datalog Retrievalfunctionality, once enabled in

AppManager, performsautomatic archiving ofDatalog files generated onone or more controlsconnected by a network. Thecollected files are givenunique names based uponthe original file name, the lasttime of modification, and the

source control. 4 or morecontrols.

MicroNet,Atlas

The AppManager Program'sDatalog Retrieval Function isembedded in AppManagerversion 2.2 or higherprograms. It is a service toolprogram used to downloadprograms utilized withMicroNet and Atlas controlscommunicating via Ethernetcommunications.

Mustpurchase alicense toactivate andthendownloadedfrom websiteor respectivecontrol.

WatchWindowStandard

8928-316 Allows users access to theService and Configure modesof a Woodward configurabledigital control.

2301D,2301D-ST,2301D-GT,723, 828,

GTCcontrols

No licenserequired andcan bedownloadedfrom websiteor purchasedCD.

03202

WatchWindow

Pro-fessional

8928-800 Allows users access to theService, Configure, andDebug modes of a Woodwardconfigurable digital control.

2301D,2301D-ST,2301D-GT,723, 828,

GTC

controls

Professional is anengineering andtroubleshooting tool, typicallyused only by serviceengineers for loading new

Woodward GAP Applicationsoftware, and viewing theDebug variables in the GAPsoftware.

This softwareis not neededby most end-users fornormal use.

Mustpurchase alicense toactivate andthendownloadedfrom websiteor purchasedCD.

03220

505ViewOperatorInterface

8928-203 Provides Human MachineInterface (HMI) capabilities for505 and 505E steam turbinecontrol systems.

505, 505E Loads onto the user's PCwhich connects to the505/505E control and isdesigned for operator controland annunciation in either

control room or local controlapplications.

Mustpurchase aCD kit.

03207

7/26/2019 51240_B

4/4

Simulation Software

NameWoodward

Part No. Descripti onHardwarePlatform Features Comments

ProductSpec

NetSimBasic

8928-5005 A simulation service tool thatallows GAP applicationprograms to be run and testedon a computer before they aredownloaded into the control.

MicroNet,MicroNet

TMR, Atlas,2301D,2300

Once a GAP applicationprogram has been created itcan then be executed andinputs changed to simulateopen-loop operation of thecontrol. It is only compatiblewith GAP programs using

Coder 2.08 or higher.

The MicrosoftC/C++6.0Compilerprogram isalso requiredto operateNetSim Basic.

Mustpurchase alicense toactivate andthendownloadfrom website.

03292

NetSimAdvanced

8928-5006 A simulation service tool thatallows GAP applicationprograms to be run and testedagainst turbine models on acomputer before they aredownloaded into the control.

MicroNet,MicroNet

TMR, Atlas,2301D,2300

Once a GAP applicationprogram has been created itcan then be executedagainst a simulated turbinepackage to simulate theclosed-loop controloperation. It is only

compatible with GAPprograms using Coder 2.08or higher.

The MicrosoftC/C++6.0Compilerprogram isalso requiredto operateNetSim Basic.

Mustpurchase alicense toactivate andthendownloadfrom website.

03293

STS100Steam

TurbineSimulator(hardware)

8957-012 Provides closed loopsimulation with 505, 505E,and 5009 steam turbinecontrol systems.

505, 505E,5009

Actual field data (pressures,flows, power, and responsetimes) are used to providerealistic simulation of theactual plant conditions. Thecontroller's actions can bemonitored, tested, andverified before installation on

the actual turbine for off-linetraining, test, andtroubleshooting.

Softwarecomes withthe hardware.

03206

www.woodward.comPO Box 1519, Fort Collins CO, USA 80522-1519 1000 East Drake Road, Fort Collins CO 80525Ph: +1 (970) 482-5811 Fax: +1 (970) 498-3058

This document is distributed for informational purposes only. It is not to be construed as creating or becoming part of any Woodward contractual or warranty obligationunless expressly stated in a written sales contract.

Woodward 2004, All Rights Reserved