Simulator STVDST-01 To verify TV and Monitor flyback transformers (diode split) that work at 15 KHz.

Features

Real simulation of the horizontal deflection stage at low voltage (see oscilloscope).

Deferred measure to the MAT. Display by oscilloscope of the

flyback pulse of any winding. Operation of the high voltage

winding and its diodes as in the TV.

Breakdown warning light. Digital coding of anomaly type. You can verify any flyback

eventhough we have no HR equivalent.

Operation

Analysis of DST transformers without the television or monitor.

Initial diagnosis without removing the transformer from the TV or monitor.

DST transformer measurements taken without applying high voltage.

Time savings in TV or monitor repairs.

Compact and functional equipment.

Technical characteristics

How to verify defective flyback?

1. Connect primary transformer feed terminal to the simulator red cable (+), yellow cable (collector).

2. Connect ABL terminal and ground pin of the flyback to the black ground cable from the simulator.

3. Connect transformer EHT silicon cap to the simulator.

4. Connect the simulator to the AC/DC adaptors.

Test results:

Good Flyback: The High Voltage will be shown in the display.

Defective Flyback: The red led lights and the defect code is shown in the first display digit.