#4 Receivers (142-173)A/V RECEIVERS Introduction to A/V Receivers 144 Surround Sound At the heart of the receiver is the surround-sound processor. The most basic surround processors

Section4A/V Receivers

Intro to A/V Receivers ................144-145

Harman Kardon ..............................146-151

JVC..........................................................152-155

Kenwood ............................................156-159

Onkyo...................................................160-164

Panasonic ....................................................165

Pioneer ................................................166-167

Sony ......................................................168-169

Yamaha................................................170-173

PHOTO - VIDEO - PRO AUDIO

www.bhphotovideo.comPHOTO - VIDEO - PRO AUDIO

A / V R E C E I V E R S

Introduction to A/V Receivers

144

Surround SoundAt the heart of the receiver is the surround-sound processor. The mostbasic surround processors use a Dolby Pro Logic II decoder. Pro Logic IIis a "matrix" system that takes an encoded two-channel stereo signaland converts it to a five-channel full bandwidth (range) playback(Left/Center/Right/Left Surround/Right Surround), resulting in a sur-round experience. Most TV shows are encoded in Dolby Pro Logic II, asare the majority of VHS videos. You can also play DVDs through a ProLogic II only-receiver because DVD players can synthesize a Pro Logic IIsignal that mimics a surround soundtrack. The newer Dolby Pro LogicIIx adds the ability of converting stereo or 5.1-channel surround soundfor seamless 6.1 or 7.1 playback.

The reality though, is that every A/V receiver now has state-of-the-art,movie-theater-quality 5.1-channel Dolby Digital decoding. With fivechannels of discrete, full-frequency sound plus a low frequency effects(subwoofer) channel (the ".1"), Dolby Digital is the surround-soundstandard that has revolutionized home-theater sound. A "Dolby Digital-ready" receiver accepts a decoded Dolby Digital signal, from a DVDplayer equipped with a built-in decoder, via analog inputs. Or, you canget a receiver with full Dolby-Digital-decoding built-in. Dolby DigitalEX adds a center rear channel which helps clarify audio effects that panfrom front to back.

In addition to Dolby Digital, many AV receivers now also include DTS(Digital Theater Sound) decoding, which is another 5.1 or 6.1 channelsystem. DTS uses a lower digital-compression rate than Dolby Digital andit tends to sound better. However, less compression does mean morethan more disc space — in this case more three times. DTS Neo:6 pro-vides up to six channels of matrix decoding from stereo matrix material.DTS Digital Surround is the DTS standard for providing 5.1 channels ofdiscrete digital audio. DTS 96/24 is a 5.1-channel surround format thatoffers a higher standard of audio quality by encoding with 96kHz sam-pling rate and 24-bit word length.

Top of the line A/V receivers include THX Surround EX and DTS ES.These formats add a third surround channel that drives loudspeakerslocated directly behind the listener. Receivers with EX and ES decodingusually include seven amplifier channels rather than five. And theyhave the same goal: to allow film sound-mixers to position sounds andpans (movements of sounds) more precisely behind you.

DSP ProcessingAll modern A/V receivers use Digital Signal Processing (DSP) chips toperform Dolby Digital and DTS decoding. The same DSP chips also cre-ate the "soundfield" modes that process two-channel sources for sur-round-sound playback over multiple loudspeakers. These soundfieldmodes attempt to replicate the acoustics of various venues, from jazzclubs to stadiums, by adding simulated acoustic reflections to the sig-nal and delaying the signals sent to the surround loudspeakers.(Sometimes these emulations amount to little more than noveltyeffects, but depending on your program material, they can enhanceyour listening experience).

DSP chips also perform another important function in the receiver:bass management. Bass management filters bass frequencies fromsmall loudspeakers and directs them to the subwoofer. While DolbyDigital, DTS, and DSP surround processing all occur in the digitaldomain, the final sound output must come from your analog speakers.Receivers use a multi-channel digital-to-analog converter (DAC) to cre-ate the final analog signal passed on to your speakers. These DACs canvary greatly in sound quality so be careful.

InputsYou should make sure your AV receiver has sufficient audio and videoinputs and outputs to meet your current and future needs. Today aDVD player may be your only digital source, but tomorrow you maywish to add a DBS satellite dish and a CD recorder that requires theirown digital inputs for optimum performance.

The heart of any home theater system, and the componentyou'll interact with most. A/V receivers handle a multitude ofessential tasks that can make or break the quality of yourhome entertainment experience. It has a preamp allowing youto route audio and video from different sources DVD, cable TV,CD, turntable, etc. to your speakers and television. The receiveralso does doubles as an AM/FM tuner, amplifier for you speak-ers, and typically controls everything from surround-sounddecoding (such as Dolby Pro Logic, Dolby Digital, or DTS) to

tone controls (bass and treble) and master volume. An A/V receiver is similar to the conventional “stereo” receiver you’ve had foryears, with several important differences. Although both select sources, control the system’s playback volume, and amplify signals todrive your loudspeakers, the A/V receiver is unique in three respects: It includes some form of surround-sound decoding, it processes5.1 or 7.1 channels (rather than the stereo receiver's two channels) and it has video inputs and outputs.

Introduction to A/V Receivers


(212) 444-5003 • 1-800-947-9903 PHOTO - VIDEO - PRO AUDIO

145

Inputs (continued)To get the most from DVD, make sure your TV has an S-Video, or evenbetter, a component video input. Most receivers include S-Video switch-ing and multiple S-Video inputs and outputs so you can convenientlyswitch between other S-Video sources like DBS satellite and a Hi8 orDigital8 camcorder. With its improved color purity, superior color detail,and reduced NTSC artifacts, Component video is superior to both com-posite and S-video. While it's ideal to have a receiver with S-Video orcomponent video switching, there are some very good but affordablereceivers that don’t have S-Video or component capability. If you plan toget an HDTV TV or projector with component-video inputs, look for areceiver offering component-video switching. Last, if you frequently useyour camcorder with your home theater setup, be sure your receiverincludes a set of convenient front-panel AV jacks.

OutputsYou'll want to make sure your receiver has enough outputs for all yourspeakers, monitors, and other devices. If you own a CD or DVD recorder,you'll probably want a receiver with a digital output jack, either coaxial oroptical, depending upon your recorder's input. If you're going to be usinga powered subwoofer in your home theater setup, you'll also want a sub-woofer out. You might want to consider buying a receiver with "pre-out"line-level RCA jacks for each of its main channels, especially if your budgetrestricts you to a relatively low-powered model. That way you can easilyadd a more powerful outboard amplifier later, relegating your AV receiverto preamplifier status. If you're highly concerned about future upgradabili-ty, you might want to consider a receiver that has six- or even eight-chan-nel throughputs. This will allow your receiver to pass the signal from afuture surround-sound format.

Because most home-theater speaker systems consist of five limited-fre-quency-range satellites and a subwoofer, you should buy a receiver witha flexible bass management system that permits you to direct low fre-quencies (anywhere from 180 Hz on down) from the five main channelsto the subwoofer. This enables both the receiver and your speakers toperform more efficiently.

Amplifier PowerHow much amplifier power do you really need for your home theatersetup? For the best performance, a minimum of 100 watts per channel(20-20,000 Hz, all channels driven) is recommended. Power is the mostmisunderstood specification in home theater. For example, a manufac-turer might give their receiver a two-channel-driven rating of 100 wattsat 20-20,000 Hz. Their five-channel playback (all channels driven) ratingmight look similar but mean something very different: 100 watts at 1000Hz, for example. Because it's only given for one frequency, not the entirerange, the second spec probably means there is a significant power dropoff at the frequency extremes when all five channels are in use. The bot-tom line is when looking at power ratings, try to get a rating that coversthe full audio spectrum, not just one frequency.

Another factor influences how powerful a receiver you need: whether ornot you have a subwoofer with a built-in power amplifier. With a subwooferin the system, low bass frequencies are filtered from the signals driving themain loudspeakers, which reduces the amount of amplifier power neededto drive them. Low bass requires more amplifier power to reproduce thando midrange and treble frequencies. By directing the bass to the sub-woofer and away from the main speakers, the receiver's power amplifiersdon't have to work as hard. Adding a powered subwoofer reduces thereceiver's power-output requirements by about 20 percent.

Plus, power output isn't always an indicator of how loudly your home-theater system will play. In fact, the speakers connected to the receiverhave as much influence on the system's volume capability as does ampli-fier power. Specifically, loudspeakers vary in their sensitivity, a measureof how much sound they produce for a given amount of input power.What does sensitivity difference mean in the real world? A great deal.Every 3-dB decrease in loudspeaker sensitivity requires a doubling ofamplifier power to achieve the same loudness. That means that speakerA (83-dB sensitivity) would need 16 times the amplifier power to producea given sound-pressure level compared to speaker B (95-dB sensitivity).Yes–160 watts driving speaker A produces the same volume as 10 wattsdriving speaker B! That's why you should match the receiver's outputpower to your speakers’ sensitivity.

THX CERTIFICATION

Some receivers are billed as "THX Certified” (Ultra, Ultra II orSelect) which means they incorporate four Lucasfilm-devel-oped technologies that better translates the soundtrack

intended for theater reproduction into the home. THX-certifiedreceivers also meet a set of technical criteria established by LucasFilm. These are:

A re-equalization circuit to reduce excessive brightness

Surround de-correlation to increase the sense of envelopment bymaking the left and right surround channels slightly differentfrom each other

Timbre matching to assure that sounds from the front and sur-round channels have the same timbre

A subwoofer crossover

Choosing a THX-certified A-V receiver has many advantages. First,

THX's signal processing (surround decorrelation, timbre matching,

re-equalization, subwoofer crossover) is of unquestionable benefit in

reproducing film soundtracks in the home. Second, you know that

the receiver has achieved a certain level of technical performance.

Third, a receiver with THX certification will likely have all the output

power you'll ever need. Finally, using a THX-certified receiver with

THX-certified loudspeakers and subwoofer takes the guesswork out

of matching the receiver to the loudspeakers.

However, that there are many excellent receivers that don't bear the

THX logo—simply because their manufacturers decided not to partici-

pate in the THX licensing program–or pay Lucasfilm royalties.



H A R M A N K A R D O N146

AVR-140, AVR-240, AVR-340, AVR-435, AVR-635Audio/Video ReceiversSetting new standards in performance and versatility,Harman Kardon’s high-performance audio/video receivers—the AVR 140, AVR 240, AVR 340, AVR 435 and AVR 635—combine the industry’s most innovative technologies andfeatures with classic Harman Kardon high-currentamplification and striking industrial design. They redefineA/V receiver performance and flexibility in their respectivecategories, and offer exceptional operational versatilityfor custom installations, multiroom applications and sophisticated home entertainment systems.The 6.1-channel AVR 140 (6 x 40 watts, 2 x 50 watts in stereo), 7.1-channel AVR 240 (7 x 50 watts, 2 x 65 watts in stereo),and 7.1-channel AVR 340 (7 x 55 watts, 2 x 70 in stereo) provide outstanding performance and value, with best-in-classfeatures such as exclusive Logic 7 and VMAx surround sound processing, a Triple Crossover bass-management system andmultichannel direct inputs for DVD-Audio and SACD. The 7.1-channel AVR 435 (7 x 65 watts, 2 x 80 watts in stereo) andAVR 635 (7 x 75 watts, 2 x 90 watts in stereo) offer a Quadruple Crossover Bass Manager, which allows the selection of one

of six different crossover frequencies for each of the fourloudspeaker groups in a 7.1-channel system, and incorporateleading-edge features such as bi-directional RS-232 connectivity(enabling two-way communication between components in custom installations with integrated system control) withfirmware upgradeablility, Dolby Virtual Speaker and DolbyHeadphone processing, assignable wide-bandwidthHDTV- compatible component-video inputs, and much more.All receivers offer extensive installation flexibility and connectivity,

including front-panel A/V and digital inputs. The AVR 635, AVR 435 and AVR 340 offer multiroom/multisource operationwith independent, simultaneous operation of two program sources, assignable 7.1- or 5.1-plus-stereo amplifier configuration,and a supplied Zone II remote for controlling the second-zone system.

Logic 7— a better approach to sound Originally developed for high-end processors, Harman’s Logic 7processing creates a more cohesive and enveloping sound fieldfrom the tens of thousands of analog matrix soundtracks currentlyavailable. Logic 7 is not only capable of resolving either five orseven channels from a two-channel source; it increases the accuracywith which sounds are directed to the center and surroundchannels, for more precise reproduction of the original soundtrack.

VMAx—when only two will doThere are still many situations where it is only possible to includetwo speakers in a room’s environment – thus sacrificing the benefitsof a 360° sonic presentation. Harman solves this problem with itsexclusive implementation of VMAx technology in both multichanneland stereo receivers. VMAx creates a three-dimensional sound fieldusing only conventional left and right front speakers. The result issound that fills a room and puts you at front row, center.

To deliver the right combination of power, performance, flexibility and ease of use, Harman Kardon has always sought tostrike a balance between the development of key enhancements to the underpinnings of audio and video technology,and the importance of making them accessible to both the advanced audiophile and the home theater novice.

AVR-635 with Open Front Door

HARMON KARDON TECHNOLOGY

AVR-635 Rear Panel View


H A R M A N K A R D O N


147

AVR-140 6x 40-watt 6.1-Channel A/V Receiver

Amplifier Section Six channels each with 40 watt of power

output (into 8 ohms, 20Hz –20kHz, <0.07%THD, (50 watt/channel stereo)

Traditional Harman Kardon high-current,ultrawide bandwidth design technologies,delivers dynamic, expansive sound quality

A Triple-crossover bass management systemallows you to select one of six differentcrossover frequencies for the front, centerand surround speaker groups.

Processing In addition to Dolby Digital and DTS

decoders, a broad choice of analog surroundmodes are available for use with a variety ofstereo sources

Along with Dolby Pro Logic IIx/II decoding,Dolby 3 Stereo and custom Hall and Theatermodes, Harman’s Logic 7 creates a wider,more enveloping field environment andmore defined fly-overs and pans.

Exclusive VMAx technology uses proprietaryprocessing to create an open, spacioussound field even with two front speakers

Conveniences Digital Input Polling detects whether the

audio signal program source (such as a cableset-top box) is digital or analog andautomatically configures the receiver toprovide the required audio output

A Stereo-Direct mode allows you to bypassall digital processing when playing backanalog, two-channel material

Easy to configure with an on-screen display

FM/AM tuner with 30 station presets

A Listener Preference System lets you set thesurround mode according to the programsource; it also enables setting speaker levelsfor each program source and DSP format(for example, the subwoofer level can be setdifferently for multichannel movie viewingand two channel CD music listening).

On-screen menu and display system makeit simple to enter settings for speakerconfigurations and bass management

Includes a six-device, programmable remote

Inputs and Outputs Two additional audio inputs are available,

and a total of six digital inputs (three optical/ three coaxial) make the AVR 140 capable ofhandling all the latest digital audio sourcessuch as DVD-Audio or SACD players.

One coaxial and one optical digital audiooutput are available for direct connection todigital recorders. A video recording outputand a six-channel input make the AVR 140virtually future-proof.

Subwoofer preamp out, with bass manage-ment, available in the surround and Stereo-Digital modes, allows you to tailor the soundto suit your room acoustics or taste.

Color-coded input, output and speaker ter-minals comply with CEA standards for easyinstallation.

Composite and S-Video inputs are availablefor four video devices, including one set onthe front-panel for connection to portabledigital devices and video game consoles.

Two sets of wide bandwidth (50MHZ) com-ponent video inputs and one set of outputs

FEATURE S

Harman Kardon’s most affordable A/V receiver isversatile and multi-featured, incorporating a widerange of listening options and six 40 Watt equalpower channels. It has a high-current, ultra-widebandwidth amplifier that can handle the mostdemanding speaker loads. A wide range ofprocessing options, including Dolby Digital, DTS,Dolby Pro Logic IIx/II and, of course, Harman’s Logic 7and VMAx technologies, give you theater-qualitysound at a budget-minded price. Compatibility withHarman Kardon’s The Bridge iPod dock allows you toconnect and control your iPod with the AVR 140’sfront panel and/or remote. The AVR 140 alsoprovides a generous complement of audio and videoconnections including 6/8-channel direct inputs andfront-panel A/V inputs, and is supplied with sixdigital inputs, two digital outputs, 192kHz/24-bitdigital-to-analog converters and a programmableremote control round out the package.




AVR-340 7x 55-watt 7.1-Channel A/V ReceiverHarman Kardon’s 7.1-channel AVR 340 is the ideal choicefor a wide range of high-performance home theater systemsand multiroom custom installations. It incorporates ahost of important upgrades including automatic EzSet/EQfunctionality, digital input polling, multiple wide band-width, HDTV-compatible component video inputs, A/VSync Delay, Dolby Pro Logic IIx, Dolby Virtual Speaker andDolby Headphone surround sound processing, and manyadditional enhancements. The AVR 335 offers an expanded

range of digital and analog audio and video connections and operational features, facilitating its use in sophisticated homeentertainment systems that include multiple audio/video program sources.

Same features as theAVR-240 Plus—

Seven x 55 watts of power output (into 8ohms, 20Hz – 20kHz, <0.07% THD, two x 70watts stereo

Cirrus CS 49400 32-bit processor

Four optical and four coaxial digital inputs

EZSet/EQ Automated SystemCalibration

Built-in automated system calibration androom equalization functions vastly simplifyinstallation while providing improvedperformance by tailoring the output of thereceiver to the speakers in use and compen-sating for the effect of room acoustics.

Extensive Multizone/MultiroomFunctionality

Assignable back surround channels,enabling the receivers to be configured foreither 7.1 or 5.1-plus-stereo dual-zone(second room) operation.

Separate audio and video outputs for the sec-ond zone with an AVR Zone II remote control.

AVR-240 7x 50-watt 7.1-Channel A/V ReceiverThe AVR 240 is the perfect audio/video receiver for thosewho want to step up to the enhanced sonic realismprovided by state-of-the-art 7.1-channel surroundsound. The AVR 240 is compatible with all popularsurround-decoding formats, including Dolby Pro LogicIIx, Dolby Virtual Speaker, Dolby Headphone and DTSformats, and also includes exclusive Harman Kardon’sLogic 7 processing. The AVR 240 also includes a wealthof advanced features and technologies such as anEzSet+ remote that provides automatic-speaker-levelcalibration, a Quad-Crossover Bass Manager, A/V Sync Delay, digital input polling and an on-screen menu display via thereceiver’s component video outputs. It provides a complete selection of audio and video connections, including two wide-bandwidth HDTV-compatible component video inputs and multiple digital and analog audio inputs.

Same features as the AVR-140, Plus— 7 x 50 watts power output (into 8 ohms,

20Hz – 20kHz, <0.07% THD, 2 x 65 in stereo;

±35 amps of high-current capability

Quadruple-crossover bass-managementsystem allows selection from among sixdifferent crossover frequencies for the frontL/R, center, surround L/R and surround backL/R speakers.

A/V Sync Delay function compensates forthe delay that can occur with audio signalswhen digital video sources, external proces-sors or digital video displays are in use.

EzSet remote control measures a system’ssound levels and automatically calibratesthem for perfectly balanced sound fieldpresentation.

Inputs and Outputs 7.1-channel preamp outputs

Four sets of stereo analog inputs

Six digital inputs and two outputs

Five composite and S-Video inputs, two(50MHz) HDTV compatible componentvideo inputs




149

AVR-435 7x 65-watt 7.1-Channel A/V ReceiverStepping up from the AVR 335, the powerful AVR 435features 32-bit post processor, RS-232 connectivity, atwo-line LCD remote control, a quadruple crossoverwith six crossover points per speaker location andmore multiroom options than any other receiver,thanks to its A-BUS Ready connectivity that. Youcan count on big numbers from the seven-channel,high-current, ultrawide-bandwidth amplifier, alongwith the ability to assign two of the channels to asecond remote zone. No matter how you add it up, the AVR 435 delivers high performance.

A-BUS Ready A-BUS Ready system allows easy multiroom

connectivity without the need for externalamplifiers. The A-BUS system utilizes a standardCat. 5 Ethernet cable to connect the receiver’srear panel in one room to a Harman Kardon AB1 A-BUS-compatible amplifier/control modulein a separate room. The AB 1 remote moduleprovides stereo audio amplification along withlocal volume control, and has a built-in IRsensor that is used with an AVR Zone II remoteto control the receiver as well as other compat-ible Harman Kardon source components.

Switchable Front-Panel JacksFront-panel input jacks are common on many A/V products, but thatdoesn’t help when you want to send a source out of the receiver, fordubbing to a portable device. Harman receivers make things easy byallowing you to switch the video, analog audio and digital audiojacks on the front panel of select AVRs from an input to an output.With one quick change of a menu setting, any digital or analogsource is routed to the front panel so that you can make your dubfor the day and be on your way.

The Multiroom SolutionEvery A-BUS Ready Harman Kardon receiver includes a multiroomswitching system, assignable rear amplifier channels and a Zone IIstandard remote. A simple cable connection to an AB 1 module is allthat’s needed to send audio and power commands to any room ofyour house. The easily installed AB 1 module powers your remotein-wall speakers without further amplification or AC connections, andit does more than adjust volume. It includes a built-in remote sensorto control your entire system.

High-Current Capability—more muscle for maximum punch

Watts per channel is an incomplete measure of amplifier power. In termsof dynamic range and impact, it’s current that counts. HCC is an overalldesign approach encompassing everything from transformer design andcapacitor size to discrete output circuitry and minimal use of negativefeedback. This electronic equivalent of a high-torque, high-displacementracing engine results in audible benefits. You enjoy tighter bass, superbtransient response and enhanced presence at any volume level.

EzSet Quick Surround Setup—your own personal audio technician

EzSet speaker calibration lets you automatically balance individualspeaker channel levels for optimum surround sound enjoyment –regardless of the speaker type or room conditions. Push a few buttonsand, in less than three minutes, your Harman Kardon home cinemasystem is calibrated. Bottom line – the adjustment most critical tomultichannel movie soundtrack reproduction is virtually foolproof.

HARMON KARDON TECHNOLOGY

Three HDTV-compatible component videoinputs (two are assignable), automatic digitalinput polling and multiroom operation.

High-current, ultrawide-bandwidth amplifiersection with seven x 65 watts of poweroutput (into 8 ohms, 20Hz – 20kHz, <0.07%THD; two x 80 watts in stereo; and ±40 ampsof high-current capability)

TI DA610 32-bit DSP processor deliverssuperlative sound quality

A/V Sync Delay (independent for each input)allows you to compensate for the loss of lipsync common in many processing systems

Bi-directional RS-232 connectivity pro-vides 3rd party control capabilities as wellas software and firmware upgradeability.

Video cross-conversion converts allS-Video and composite video sources tocomponent video output, using leading-edge video-processing circuitry thatmaintains maximum picture quality withno conversion artifacts or imagedegradation. This enables the receiver tobe connected to a compatible TV set ordisplay device using just a single set ofcomponent video cables.




AVR-635 7x 75-watt 7.1-Channel A/V ReceiverThe AVR 635 combines the sonic power of a high-current, ultrawide-bandwidth amplifier with thecomputing power of Texas Instruments’ most advancedaudio DSP to deliver unparalleled performance. Thanksto Harman Kardon’s advanced EzSet/EQ functionality,the AVR 635 not only automates speaker, output anddelay settings; it corrects for room acoustics with aparametric equalizer. Add video conversion circuits thatoutput all video sources via component connectionswith on-screen graphics, and you have the power totame any system and deliver powerful performance.

The top-of-the-line AVR 740 has all the features of theAVR-635 plus it offers dual-input HDMI 1.1 switching andis equipped with DCDi by Faroudja, image processingwhich upconverts all inputs to high-resolution video,ensuring that the AVR 740, video quality will match theunparalleled power and performance of Harman Kardonaudio. The AVR 740 also features dual (stereo) subwooferoutputs that provide even greater sub bass imagingaccuracy. Other feature enhancements of the AVR-740

include a USB port for streaming audio from your PC, and XM Satellite Radio ready connectivity.

AVR-740 7x 85-watt 7.2-Channel A/V Receiver

High-current, ultrawide-bandwidth, discrete-output amplifier section that deliversseven channels of high-current, ultrawide-bandwidth amplification (75 watts into8 ohms, 20Hz – 20kHz, <0.07% THD; two x 90 watts in stereo; and ±50 amps ofhigh-current capability).

A slot-mounted tuner can be upgraded at a future date to accommodate HD Radio.AVR-635 Rear Panel View

Software Upgradeability and Digital ConnectivityWith a two-way communications port and rewritable flash memory, select AVR receivers can be easily updated with new features and functionality foryears to come. The RS-232 port not only enables software upgrades; it gives you full control of your system with optional third-party keypad systems,controllers and personal computers.

XM Satellite Radio-ready.

24-bit/192kHz audio D/A converter.

A USB port for streaming audio from a PC.

A-BUS connectivity for multiroom/multisource audio and videooperation.

Supplied with the TC 30 activity-based remote control, an all-in-one remote that provides complete control of every componentin a home entertainment system.

7 x 85 Watts of power output (into 8 ohms, 20Hz – 20kHz, <0.07 percent THD, all channels driven; 2 x 100 Watts in stereo; and ±60 amps ofhigh-current capability).

Dual-input HDMI 1.1 switching,along with a DCDi by Faroudja FL2310processor and scaler provides upconverted and enhanced HD 780pand 1080i video from 480i and 480p video sources.

EzSet/EQ II feature set provides automated system calibration andfull-range room equalization including stereo subwoofer adjustmentcapability.

AVR-Series Comparison Chart




151

AVR-740 AVR-635 AVR-435 AVR-340 AVR-240 AVR-140Number Of Channels 7.2-Channel 7.1-Channel 7.1-Channel 7.1-Channel 7.1-Channel 6.1-Channel

Stereo Power (FTC) 100 x 2 90 x 2 80 x 2 70 x 2 65 x 2 50 x 2

Multichannel Power (FTC) 85 x 7 75 x 7 65 x 7 55 x 7 50 x 7 40 x 6

Amplifier Type High Current ±60 amps High Current ±50 amps High Current ±40 amps High Current ±35 amps High Current ±35 amps High Current ±25 amps

THD @ Impedance 0.07% @ 8 ohms 0.07% @ 8 ohms 0.07% @ 8 ohms 0.07% @ 8 ohms 0.07% @ 8 ohms 0.07% @ 8 ohms

Bandwidth 20Hz – 20kHz 20Hz – 20kHz 20Hz – 20kHz 20Hz – 20kHz 20Hz – 20kHz 20Hz – 20kHz

Bandwidth @ 1W (+0/–3dB) 10Hz – 130kHz 10Hz – 130kHz 10Hz – 130kHz 10Hz – 130kHz 10Hz – 130kHz 10Hz – 130kHz

Signal-to-Noise Ratio (IHF-A) 100dB 100dB 100dB 100dB 100dB 100dB

Power Supply Torroidal transformer Linear transformer Linear transformer Linear transformer Linear transformer Linear transformer

IEC Detachable Power Cord Yes Yes Yes No No No

Dolby Digital EX Yes Yes Yes Yes Yes Yes

Dolby Pro Logic II Pro Logic II x Pro Logic II x Pro Logic II x Pro Logic II x Pro Logic II x Yes

DTS 5.1 Yes Yes Yes Yes Yes Yes

DTS-ES 6.1 Matrix & Discrete Yes Yes Yes Yes Yes Yes

DTS 96/24 / DTS Neo:6 Yes / Yes Yes / Yes Yes / Yes Yes / Yes Yes / Yes No / Yes

Logic 7 Yes, w/96kHz capability Yes, w/96kHz capability Yes, w/96kHz capability Yes Yes Yes

VMAx Yes Yes Yes Yes Yes Yes

Compressed-Audio Decoding MP3 MP3 and WMA MP3 and WMA No No No

Dolby Virtual Speaker Yes Yes Yes Yes Yes No

Headphone Modes 2-Channel, Dolby 2-Channel, Dolby 2-Channel, Dolby 2-Channel, Dolby 2-Channel, Dolby VMAx

HDCD Processing Yes Yes No No No No

Multizone (with remote) Audio/video Audio Audio Audio No No

Assignable Rear Amplifiers Yes Yes Yes Yes N/A N/A

EzSet Yes, on remoteEzSet/EQ with mic EzSet/EQ with mic

EzSet/EQ with mic Yes, on remote Noplus audio tools plus audio tools

A/V Inputs 6 5 5 5 5 4

S-Video Inputs 6 5 5 5 5 4

Analog Audio Inputs 4 4 4 4 4 4

Digital Inputs (Coax/Optical) Rear 3/3, Front 1/1 Rear 3/3, Front 1/1 Rear 3/3, Front 1/1 Rear 3/3, Front 1/1 Rear 2/2, Front 1/1 Rear 2/2, Front 1/1

Digital Outputs (Coax/Optical) Rear 1/1, Front 1/1 Rear 1/1, Front 1/1 Rear 1/1 Rear 1/1 Rear 1/1 Rear 1/1

Direct Audio Inputs6/8-Channel 6/8-Channel

6/8-Channel 6/8-Channel 6/8-Channel 6/8-Channelw/ bass management w/ bass management

Preamp Outputs 7.2 Channels 7.1 Channels 7.1 Channels 7.1 Channels 7.1 Channels Subwoofer

Input Titling Yes Yes Yes No No No

Bass Management Quad crossover Quad crossover Quad crossover Quad crossover Quad crossover Triple crossover

On-Screen Display Yes Yes Yes Yes Yes Yes

DSP ProcessorTI DA610 TI DA610 TI DA610 Cirrus CS 49400 Cirrus CS 49400

Cirrus CS 4932632-bit 32-bit 32-bit w/ 32-bit post proc. w/ 32-bit post proc.

Output DACs 192kHz/24-bit 192kHz/24-bit 192kHz/24-bit 192kHz/24-bit 192kHz/24-bit 192kHz/24-bit

DCDi Video Processing Yes No No No No No

HDTV-Compatible 3 (100mHz), 3 (50mHz), 3 (50mHz), 2 (50mHz) 2 (50mHz) 2 (50mHz)

Component Video Inputs Assignable Assignable Assignable

A/V Sync Delay Yes Yes Yes No No No

Video Upconversion Yes Yes Yes No No No

A-BUS Ready Yes, x2 Yes Yes No No No

Programmable Remote8-Device learning 8-Device learning 8-Device learning

8-Device 8-Device 6-Devicebacklit with two-line LCD backlit with two-line LCD backlit with two-line LCD

IR In/Out Jacks Yes Yes Yes Yes Yes No

Bi-directional RS-232 Port Yes Yes Yes No No No

HD Radio Upgrade Slot Yes Yes Yes No No No

Dimensions (HxWxD) 75⁄8 x 175⁄16 x 201⁄2” 61⁄2 x 175⁄16 x 171⁄8” 61⁄2 x 175⁄16 x 171⁄8” 65⁄8 x 175⁄16 x 15” 65⁄8 x 175⁄16 x 15” 65⁄8 x 175⁄16 x 15”

Weight 55 lb 41 lb 39 lb 31 lb 28 lb 24.4 lb



J V C152

RX-D201 / RX-D2027.1 Audio/Video Control ReceiversThe RX-D201 (silver) and RX-D202 (black)and are stylish and feature-packedreceivers that provide high performancewithout the high price. With 100 wattsper channel for seven channels, theyhave the power necessary for today’sdemanding digital movie soundtracks.7.1 inputs and a full range of audiocodecs, including DTS, Dolby Digital andDolby Pro Logic IIx make these cost effective receivers even more impressive. There are component, composite andS-Video inputs and outputs, and a multi-brand remote control. They also include a USB interface to allowing audiostreaming from you PC, providing a complete and forward-thinking AV receiver for any home theater application.

FEATURE S

High-performance DSP features superiorsound field processing power. It iscompatible with many of today’s homecinema sound formats, including DolbyDigital EX, Dolby Pro Logic IIx, DTS-ES, DTS96/24, and DTS NEO:6.

DAP (Digital Acoustics Processor) allowsdigital recreation of acoustic environments(halls, pavilions, etc.) in your media room.JVC developed a new sound field simulationtechnology jointly with one of leadingconcert-hall designers and contractors.Capable of handling multi-channel sources, itmakes use of a vast amount of data for thecreation of sound field patterns that aredifficult with conventional processingsystems based on field-measured impulseresponses. Each sound field pattern isverified and modified repeatedly by criticalauditions. The result is that sound fields arereproduced most naturally, with earlyreflections simulated realistically. Moreover,the processor is compatible with multi-channel sources such as Dolby Digital and DTS.

DSP Digital Equalizer

Hybrid Feedback digital amp uses a digitalfeedback loop to generate a precise signaland an analog feedback loop to ensure thatthe final signal is identical to the original.The Hybrid Feedback design allows theamplifiers to be compact, highly efficientand able to generate high power outputwith low distortion levels.

AV COMPU LINK provides simple one touchoperation between VC audio and videocomponents. For example, pop a VHS tapeinto the VCR and it will automatically powerup your receiver and your television andthen turn them each to the proper inputs.

Virtual Surround Back system allows you toenjoy the benefits of the wider sound fieldsavailable in a true 6.1-channel source, whenyou don’t have the space for a full 6.1 set-up.

3D Headphone mode allows you to enjoymulti-channel audio by down-mixing thesource material from the current surroundmode to the two headphone channels.

Quick Speaker SetupThe quick speaker setup feature offers true “unpack and play” convenience: just input thenumber of speakers you use and the size of your listening/viewing room—that’s all. You canskip the elaborate steps you normally have to follow before the show starts for the first time.Anytime later you can adjust settings to your personal taste.

Conveniences Center Channel Alignment is a DSP (digital

signal processing) technology that compen-sates for placement of the center channelspeaker either above or below your display,thereby shifting the apparent source of thedialog to the screen.

Includes multi-brand A/V-STB (CATV/DBS)remote control

3D-PHONIC is a JVC technology that allowsyou to approximate the surround soundexperience without the use of surround andcenter channel speakers.

Sleek profile to complement today's hometheater systems.

Inputs and Outputs Four analog inputs and two outputs

One optical input and one assignable coaxi-al digital input

Three S-Video inputs and outputs, threecomposite inputs and outputs, and twocomponent inputs and one output.

Subwoofer Pre-Out

A USB input is provided for receiving audiosignals (MP3, WMA even internet streamedaudio) from your PC. That means you candigitally send audio from your computer oreven an MP3 player to the receiver and fromthere throughout the system.

High Performance


J V C


153

RX-D301 / RX-D302 /RX-D401 / RX-D402

FEATURE S

RX-D301/D302/D401/D402Step-up Features

RX-D301/RX-D302 Only Two assignable optical inputs, one optical output and an assignable coaxial input.

The RX-D401/D402 offers a wired interface, while the RX-D301/D302B feature wireless playbackusing an included transmitter that plugs into your PC’s USB port and sends a 2.4GHz signal to areceiver in the same room for file playback. The wireless link can transmit uncompressed filesover a range of approximately 100’. To ensure uninterrupted performance, interference fromother devices is automatically detected by the transmitter and an interference-free band is auto-matically selected.

Equal power to all seven channels: 110 wattsper channel, 6 ohms at 1kHz

Stereo: 110 watts per channel, 6 ohms, from20Hz to 20kHz, with 0.8% THD

Analog 5.1 multi-channel inputs for DVD orother surround sound sources.

P.E.M. D.D. 192kHz/24-bit converters for thefront channels

They feature CC Converter, an exclusivetechnology designed to deliver the bestpossible sound quality when playing com-pressed audio files. CC Converter improvesthe quality of these files using advanceddigital signal processing that computes thedata lost during the digital-to-analog con-version and recreates the original signal.wo modes are provided for improving thequality of compressed and non-compressedaudio sources, respectively.

They can perform video up-conversion (fromcomposite to S-Video and component, andfrom S-Video to component) on one videoinput to another compatible signal for out-put. With the RX-D401/402, the format of aninput can be converted to HDMI format fordisplay on a compatible monitor with easy,one-cable connection.

7.1 Audio/Video Control ReceiversThe JVC RX-D301 (silver) and RX-D302 (black)A/V receivers offer enhanced features andcapabilities over the already sleek andthoughtfully designed RX-D201 and RX-D202.The receivers offer 110 watts of equal power foreach of their 7 channels, as well as analog 5.1inputs for accommodating a DVD player. The RX-D301 and RX-D302 feature a wireless USB interface for streaming audiofrom your PC. They also add a JVC’s CC (Compression Compensative) Converter, which restores the high end details thatcan be lost when playing compressed (MP3s, WMAs) and non-compressed (CDs, WAVs) digital audio. It also featuresVideo Signal Up-conversion which can up-convert input signals to be compatible with a display’s input. With the exception of wireless USB, the RX-D401 (silver) and RX-D402 (black) offer the same feature set as the RX-D301and RX-D302, but also includes an HDMI interface. The HDMI interface handles high-definition 720p and 1080iuncompressed digital video and multi-channel audio all over one cable

HDMI (HighDefinitionMultimediaInterface) is adigitalaudio/videointerface thatallows a singlecable to carryuncompressed audio and video signals in digital form, offering high quality signal transmissionplus the simplicity of a single connection.

With a HDMI-equipped source, such as a DVD player or a cable/satellite box, just one cable con-nects the component to the receiver. On the output side, a single HDMI cable connects thereceiver to the display.

Handling the HDMI up-conversion is a Genesis deinterlacer that incorporates DCDi (DirectionalCorrelational Deinterlacing) technology from Faroudja.

To ensure the best possible video signal, regardless of the source, the RX-D401/D402 receiversup-convert composite, S-Video and component signals to HDMI.

Includes two HDMI inputs and one output.

RX-D401/RX-D402 Only



J V C154

RX-D7027.1 Audio/Video Control ReceiverThe RX-D702 (black) receiver combineadvanced technological features alongwith seven channels of equal powered,high current, amplification (150watts/channel) to deliver not onlytrue audiophile sound, but seamlessintergration for your home theaterand music listening system. The HDMIinterface not only provides a single cable solution between the RX-D701/702 and your display, but it also up-scalescomposite, S-Video and component video signals to the crystal-clear digital video format, allowing you to takeadvantage of the optimum picture quality offered by today's high definition TVs. The RX-D701/702 are truly the receiversof tomorrow. They feature not only a wired and wireless USB link between the receiver and your PC, but they also featurea SIRIUS satellite radio input, with remote control capabilities, that gives you access to cutting-edge digital radio.

Step-up Features from the RX-D301/302 and RX-D401/402

Equal power to all seven channels: 150 wattsper channel, 6 ohms at 1kHz, with 0.8% THD

Stereo: 150 watts per channel, 6 ohms, from20Hz to 20kHz, with 0.8% THD

Aluminum front panel

Smart Surround Setup 3.0 allows you toautomatically set up the optimal multi-channel soundfield by offsetting speakerdelay times and levels for the listeningposition just by clapping your hands

Multi-brand glow remote control.

The on-screen display makes receiveradjustments as convenient as possible.

Inputs and Outputs Five analog inputs and two outputs

Three assignable optical inputs, one opticaloutput and an assignable coaxial input.

Four S-Video inputs and three outputs, fourcomposite inputs and three outputs, andtwo component inputs and one output.

Dedicated input for SIRIUS satellite radiowith SIRIUS Control on Remote

Sophisticated digital technologies matching the latest home theater needsJVC A/V receivers feature USB to interface with your PC — Wireless USB, which uses the built-intransceiver (transmitter/receiver), and Wired USB, which uses a USB cable. Combined with CCConverter — which significantly improves the sound quality of compressed music files from PC— this function lets you experience sound far superior to what comes from your laptop’s tinyspeakers. With Wireless USB, 2Mbps transmission rate using the 2.4GHz band allows losslessreproduction of even uncompressed files. Use of DSSS (Direct Sequence Spreading Spectrum)modulation technology enables transmission of uncompressed signals with superior resistanceagainst noise, which retains superb sound quality.

FEATURE S

On the RX-D702, HDMI is backward compatible with DVI formats.

RX-D201 / 202 RX-D301 / 302 RX-D401 / 402 RX-D701 / 702

Number of Channels 7.1 7.1 7.1 7.1

Output Power – Stereo 100 watts per channel, 100 watts per channel, 100 watts per channel, 100 watts per channel,

6 ohms, 6 ohms, 6 ohms, 6 ohms,

from 20Hz to 20kHz, from 20Hz to 20kHz, from 20Hz to 20kHz, from 20Hz to 20kHz,

with 0.8% THD with 0.8% THD with 0.8% THD with 0.8% THD

Output Power – Surround 100 watts per channel, 110 watts per channel, 110 watts per channel, 150 watts per channel,

6 ohms at 1kHz, 6 ohms at 1kHz, 6 ohms at 1kHz, 6 ohms at 1kHz,

with 0.8% THD with 0.8% THD with 0.8% THD with 0.8% THD

Circuitry

Dolby Digital EX / Dolby Digital Yes Yes Yes Yes

DTS Yes Yes Yes Yes

DTS ES – Discrete6.1 / Matrix6.1 Yes Yes Yes Yes

DTS NEO:6 / DTS 96/24 Yes Yes Yes Yes

DVD Multi-Channel Audio Compatible (5.1 ch. inputs.) No Yes Yes Yes

Dolby Pro Logic II / IIx Yes Yes Yes Yes

Virtual Surround Back Yes Yes Yes Yes

3D PHONIC Yes Yes Yes Yes

3-D Headphones Yes Yes Yes Yes

CC Converter (2 Modes) No Yes (Front Channel) Yes (Front Channel) Yes (Front Channel)

P.E.M. D.D. Converter No 192kHz/24-bit, Front ch 192kHz/24-bit, Front ch 192kHz/24-bit, Front ch

Inputs and Outputs

Composite Video Inputs / Outputs 3 / 3 3 / 3 4 / 3 4 / 3

S-Video Inputs / Outputs 3 / 3 3 / 3 4 / 3 4 / 3

Component Video Inputs / Outputs 2 / 1 2 / 1 2 / 1 2 / 1

HDMI – – 2 Ins / 1 Out 2 Ins / 1 Out

Analog Audio Inputs/Outputs 4/2 4/2 4/2 5/2

Digital Inputs (optical/coaxial) 1/1 2/1 1/1 3/1

Digital Outputs (optical/coaxial) –/– –/– –/– 1/–

USB Input Wired / Wireless Yes / – Yes / Yes Yes / – Yes / Yes

SIRIUS Radio Input No No No Yes

Preamp Outputs Subwoofer Subwoofer Subwoofer Subwoofer

Functions

DSP Digital EQ Yes Yes Yes Yes

Fluorescent Display with Dimmer Yes Yes Yes Yes

Dot Matrix Display Yes Yes Yes Yes

Center Channel Alignment Yes Yes Yes Yes

Quick Speaker Setup Yes Yes Yes Yes

Smart Surround Setup No No No Yes

One-Touch Operation No Yes Yes Yes

Midnight Mode Yes Yes Yes Yes

Number of Radio Tuner Presets 15 AM and 30 FM 15 AM and 30 FM 15 AM and 30 FM 15 AM and 30 FM

AV Compu Link Yes Yes Yes Yes

Remote Control Unit –RF Multi-Brand AV-DBS-CATV- Yes Glow Glow Glow

Dimensions 173⁄16 x 35⁄8 x 145⁄8” 173⁄16 x 35⁄8 x 145⁄8” 173⁄16 x 35⁄8 x 145⁄8” 173⁄16 x 35⁄8 x 145⁄8”


J V C


155

RX-Series Comparison Chart



K E N W O O D156

VR-906 (S) Home Theater ReceiverKenwood’s VR-906 makes a great center-piece for integrating your entire hometheater system. With 100 watts x 6channels, Dolby Digital EX and DTS-ES,the VR-906 delivers superb 6.1-channelsurround soundtrack playback from thelatest DVDs, while Dolby Pro Logic IIxcreates up to 7.1-channel surround soundfrom conventional stereo music sources likeCDs, tapes and even FM radio. The VR-906 features an active EQ that tailors the receiver’s response to bring the bestsound out of whatever type of speakers you have, whether full-range or satellites, and the type of program material youare listening to. There are five audio DSP modes available (Arena/Theater/Jazz Club/Stadium/Disco) that bring yourmusic to life with added dimension and depth. Component video as well as coaxial and optical digital inputs providehigh-quality connections for DVD players, satellite tuners and other digital sources, and six analog inputs let you connecttape decks and other components.

Power Ratings Stereo Power: 100 Watts per Channel (FTC,

Left/Right, 40Hz - 20kHz, 0.7% THD, 8 ohms)

Surround power output: 100W x 6 (8 ohms,40Hz-20kHz, 0.7% THD)

Amplifier Kenwood’s exclusive KAM-1 Power Amplifier

Circuitry uses a modular design that doubleselectrical efficiency, producing more powerwhile generating less heat which translatesinto improved sound quality and reliability.

Digital Format Decoding Dolby Digital EX, DTS-ES, DTS Neo:6, DTS,

Dolby Digital, Dolby Pro Logic IIx

FEATURE S

AM/FM Tuner Automatic and manual tuning

Quartz PLL Synthesized digital tuning

40 FM and AM station presets

Remote Control Kenwood remote control unit

(with the capability of controlling KenwoodDVD players).

Additional Features Midnight Theater Mode circuitry uses

compression to make a Dolby Digitalsoundtrack’s loud passages softer, allowingyou to listen to a film without disturbingothers. Midnight Theater responds to specialencoding contained in the Dolby Digitalsoundtrack itself, and only functions duringvery loud passages.

Two switched AC accessory outlets

Audio muting

Dynamic rotary encoder volume control

Fluorescent display with dimmer andvolume indication

Midnight black or silver finish

One-Touch speaker connectors

Audio Inputs/Outputs Two coaxial and one optical digital audio

input

Headphone output

Subwoofer, SurrBackL and SurrBackRpreamp outputs

6 stereo analog audio inputs and 2 sets ofoutputs

Video Inputs/Outputs Two HD-compatible component video

inputs and output

Three composite video inputs

One component and one composite videomonitor output

One composite video record outputs

Automatic analog and digital signal formatdetection and selection

Active EQ with Cinema, Music and TV modes

Bass and Treble tone controls; Bass Boostand loudness control

Adjustable analog input sensitivity withindividual source memory

96kHz /24-Bit A/D and D/A converters

Audio DSP Listening Modes can simulate 5different environments:(Arena, Theater, Jazz Club, Stadium, Disco)

The fully digital precision Bass managementsystem lets you set up the system so thatdeep bass is sent only to those speakersdesigned to handle it. This reduces distortionand increases the dynamic range.

Audio Features


KENWOOD


157

VR-9050 (S) /VR-9060 (S) Audio/Video Receivers If you’re ready to take the home theater experienceto the next level of performance, the VR-9050 andVR-9060 are ready for you. With six 100-wattamplifier channels and Kenwood’s exclusive K-STATself-adjusting power transistors, you have thepower to play film soundtracks at realistic theaterlevels, while at the same time, maintainingoptimum sound quality. A 32-Bit ADI SHARC DSPprocessor gives the VR-9050 and VR-9060 incrediblyaccurate performance at all signal levels, from theloudest explosion to the most delicate musicalpassage. The receivers’ sixth amplifier channeldrives a surround back speaker for the latest6.1-channel Dolby Digital EX and DTS-ES 96/24soundtracks, and Dolby Pro Logic IIx creates anincredible 7.1-channel experience with ordinary2-channel sources like CDs, VHS tapes and even FM radio. The black VR-8050 has connections for 8 different audiocomponents (including a turntable and a DVD-Audio player) and features component and S-Video connections formaximum video quality. The included Universal Pre-programmed Remote controls the receiver, your TV, VCR, DVD player,cable or satellite tuner, and select audio components. The silver VR-9060 adds additional component and S-Videoconnections as well as video up conversion from composite to S-Video.

FEATURE S

Power Ratings Stereo Power: 100 Watts per Channel (FTC,

Left/Right, 20Hz - 20kHz, 0.09% THD, 8 ohms)

Surround Power (Center): 100 Watts (20Hz -20kHz, 0.09% THD, 8 ohms)

Surround Power (Left/Right): 100 Watts + 100Watts (20Hz - 20kHz, 0.09% THD, 8 ohms)

Surround Power (LSurround/RSurround): 100Watts + 100 Watts (20Hz - 20kHz, 0.7% THD,8 ohms)

Surround Power (Surround Back): 100 Watts(20Hz - 20kHz, 0.7% THD, 8 ohms)

Audio Features Active EQ with Cinema, Music and TV

listening modes

32-Bit 2nd-Generation ADI SHARC DSPprocessor

Dolby Digital SURROUND EX, DTS 96/24,DTS-ES, DTS, Dolby Digital, Dolby ProLogic Iix

Video Connections Front Panel AV/Aux Input with S-Video

connection

HD-Compatible component video inputsand output

Two component, five S-video and five composite video inputs

One component,two S-Video and twocomposite video outputs

One composite, one S-Video video recordoutputs

Audio Connections Six-channel analog audio inputs

Two coaxial and two optical digital audioinputs

Phono input with RIAA EQ

Seven stereo analog audio inputs

Subwoofer, SurrBackL and SurrBackR preamp outputs

Amplifier Features Kenwood’s exclusive K-STAT Discrete Audio

Amplifier output circuitry incorporating athermal compensation sensor inside thepower transistor housing. This eliminatesany amplifier warm-up period and allowsthe amplifier to instantaneously adjust totemperature changes, greatly improvingsound quality and consistency at all volumelevels. K-STAT is the world's first transistordesigned specifically for audio amplificationpurposes.

Banana Plug-compatible speaker connectorsfor all channels except for channel B

9060S Step-up Features One optical digital audio output

Three component, five S-video and five composite video inputs

Video Up-Converting from composite to S-Video



K E N W O O D158

VR-9070 THX Certified Audio/Video Receiver

Power Ratings Stereo Power:

100 Watts per Channel (FTC, Left/Right,20Hz - 20kHz, 0.09% THD, 8 ohms)

Surround Power:100 Watts (20Hz - 20kHz, 8 ohms —0.09% THD for front and center channels,0.7% THD for surround channels)

Audio Features THX SELECT-certified, THX SURROUND

EX, Dolby Digital SURROUND EX, DTS96/24, DTS-ES, DTS, Dolby Digital, DolbyPro Logic IIx

Additional Features Audio and video dual-zone operation

Two IR repeater outputs and one IRsensor input

LCD universal remote control(with Learning mode for other A/Vequipment)

Midnight mode(Dynamic compression system in DolbyDigital mode and DTS mode)

Dolby Virtual Speaker and DolbyHeadphone

The Kenwood VR-9070 has been designed fromthe ground up to meet the demanding criteriaof THX Select Certification. The VR-9070’simpressive digital surround-sound processingcapabilities include THX Cinema Mode, THXSurround EX as well as Dolby Digital, and DTS-ES(Discrete, Matrix, Neo:6). Dolby Pro Logic IIxcreates an incredible 7.1-channel experiencewith ordinary stereo sources. The VR-9070delivers 100 Watts into each of seven channels, whileits K-STAT Discrete Audio Amplifier helps to ensure the highest possible signal purity. A 32-Bit ADI SHARC DSP processorgives the VR-9070 the same accurate performance and dynamic realism as the VR-9050 and VR-9060. A full complementof AV inputs/outputs, including Component and S-Video, four digital inputs and a digital output, makes it easy to connectall of your digital and analog components, while a second set of audio/video outputs lets you send your entertainment toa second zone. The IR sensor input and IR repeater outputs let you use the included universal pre-programmed remote tocontrol your entire system even if the receiver is placed in a cabinet, or other non line-of-sight location.

SHARC 32-bit Floating-Point Digital Signal Processing

Unlike conventional fixed-point DSPs that can onlyapply a small amount of resolving power tolower-level signals, SHARC’s 32-bit floating-pointarchitecture can apply its full 32 bits of resolutionto all signals, regardless of their amplitude. Thismaximizes dynamic range and signal-to-noiseperformance, allowing Kenwood receivers toreproduce any signal—from the loudest explosionto the most delicate sonic nuance —with theultimate impact, clarity, and realism.

K-STAT Self-Adjusting Power Transistors

Kenwood’s exclusive K-STAT power transistors arethe only ones in the world that instantly adjusttheir performance to compensate for thetemperature changes that occur when a transistoris amplifying a music signal. Typical powertransistors rely on small heat sensors mountedbetween them on the heat sink that can’t react torapid changes in the transistors themselves. Thismeans that for most of the time the transistorsaren’t adjusted correctly, producing distortion ofup to 10%. Kenwood K-STAT transistors are theonly ones that have heat sensors built-in, so theyadjust instantly to temperature changes andconsistently operate at peak performance. K-STATdelivers low distortion clarity at all listeningvolumes from the moment it’s powered-up.

FEATURE S

Seven stereo analog audio inputs plusa phono input with RIAA EQ

Six channel analog audio input

Two coaxial and two optical digitalaudio Inputs; one optical output

Front panel AV/aux input with S-Videoconnection

Three HD-compatible component, fiveS-Video and five composite video inputs

One HD-compatible component, oneS-Video and one composite video output

One composite and one S-Video videorecord outputs

Video up-conversion from composite to S-Video

One composite video output is availablefor Zone B

8-ch pre-out — Left, Center, Right, LeftSurround, Right Surround, Sub, LeftSurround Back and Right Surround Back

Left and Right Zone B preamp outputs

Audio/Video Inputs/Outputs


KENWOOD


159

VR-9070/VR-9070-S VR-9060-S VR-9050 VR-906/VR-906-SNumber Of Channels 7 6 6 6

100 Watts per Channel 100 Watts per Channel 100 Watts per Channel 100 Watts per ChannelPower Output 20Hz–20kHz, 0.09% THD, 20Hz–20kHz, 0.09% THD, 20Hz–20kHz, 0.09% THD, (40Hz– 20kHz, 0.7% THD,

8 ohms FTC 8 ohms FTC 8 ohms FTC 8 ohms FTC

Amplifier FeaturesK-STAT Discrete Power Amplifier Yes Yes Yes ––

KAM-1 High-Efficiency Power Amplifier –– –– –– Yes

Speaker B Outputs Yes Yes Yes ––

Banana Plug-Compatible Speaker Connector All Channels (except Spkr B) All Channels (except Spkr B) All Channels (except Spkr B) ––

Audio FeaturesTHX Select Certification with THX Cinema Mode Yes –– –– ––

Dolby Digital and DTS Digital Surround Sound Yes Yes Yes Yes

Dolby Pro Logic IIx with Music Mode Adjustments Yes Yes Yes Yes

Dolby Pro Logic Yes Yes Yes Yes

Dolby Digital EX THX Surround EX Yes Yes Yes

DTS-ES 96/24 (Discrete & Matrix & Neo: 6) Yes Yes Yes Yes

5 Audio DSP Modes Yes Yes Yes Yes

Active EQ with Cinema, Music & TV Modes Yes Yes Yes Yes

Automatic Digital Signal Format Detection & Selection Yes Yes Yes Yes

24-bit/96kHz A/D and D/A Converters Yes Yes Yes Yes

32-Bit ADI SHARC Floating Point DSP Processor Yes Yes Yes 24-Bit Cirrus Logic

Full Digital Bass Managementw/THX Crossover and

Yes Yes YesBass Peak Level Manager

Adjustable Analog Input SensitivityYes Yes Yes Yes

w/ Individual Source Memory

Digital/Analog Record Mode (Auto/Manual) Yes Yes Yes Yes

Midnight Mode Yes Yes Yes Yes

Bass & Treble Controls / Bass Boost Control Yes / Yes Yes / Yes Yes / Yes Yes / Yes

Audio ConnectionsDigital Audio Inputs (Coaxial/Optical) / Outputs (2/2) / 1 Optical (2/2) / 1 Optical (2/2) / –– (2/1) / ––

6-Channel Analog Input Yes Yes Yes ––

Stereo Analog Audio Inputs (Total) 7 7 7 6

Phono Input with RIAA Equalization Yes Yes Yes ––

Preamp OutputsL/C/R/LS/RS/ SurrBackL/SurrBackR/ SurrBackL/SurrBackR/ SurrBackL/SurrBackR/

SurrBackL/SurrBackR Subwoofer Subwoofer Subwoofer

Zone B Preouts Left/Right –– –– ––

Video ConnectionsVideo Inputs (Component, S-Video, Composite) 3 / 5 / 5 3 / 5 / 5 2 / 5 / 5 2 / 3

HD-Compatible Component Video Inputs/Outputs Yes Yes Yes Yes

Video Up-converting from Composite to S-Video Yes Yes –– ––

Video Record Outputs (Composite, S-Video) 1 / 1 1 / 1 1 / 1 1 / ––

Video Monitor Outs (Component, S-Video, Composite) 1 / 1 / 1 1 / 1 / 1 1 / 1 / 1 1 / –– / 1

Front-Panel A/V Aux Input w/S-Video 1 1 1

Zone B Video Output (Composite) 1 –– –– ––

General FeaturesMulti-Zone Operation (Audio & Video) Yes –– –– ––

IR Sensor Input / IR Repeater Outputs 1 / 2 –– –– ––

Dynamic Rotary Encoder Volume Control Yes Yes Yes Yes

Fluorescent Dot Matrix Display w/Volume Indication Yes Yes Yes Yes

Finish Black or Silver Black or Silver Black or Silver Black or Silver

Remote Control Type Universal Pre-Programmed Universal Pre-Programmed Universal Pre-Programmed Kenwood System

Direct Input Source Selection (using Remote) Yes Yes Yes Yes

VR-Series Comparison Chart



O N KYO160

TX-SR5037.1-Channel A/V ReceiverWith the TX-SR503, Onkyo has forever redefined howyou will look at an entry-level home theater receiver.Those new to home theater will love the user-friendlydesign and features, which include crossover adjust-ment for bass management, color-coded inputs andoutputs for speakers, a logically laid-out front paneland an easy-to-use remote control. Those looking to upgrade their current hometheater receiver will be impressed with 7.1-channels,powered by a transformer that gives you the all-enveloping surround sound of Dolby Digital EX andDTS-ES as well as the surround sound of Dolby ProLogic IIx and the near master quality of DTS 96/24.Then when you add Onkyo exclusives like WRAT (WideRange Amplifier Technology) and CinemaFILTER, youhave the smoothest sound at any volume. Add on a pair of wideband component video inputs and an output and youhave an entry level receiver ready to take care of the demands of today and the future.

FEATURE S

Available in black and silver finish

Digital Format Decoding Dolby Digital EX, DTS-ES Discrete/Matrix 6.1,

DTS 96/24 and DTS Neo:6

Dolby Laboratory’s Pro Logic IIx processingtakes the guesswork out of surroundprocessing by automatically deriving full6.1-channel audio from absolutely any stereoor multichannel source.

7.1 channel processing for Dolby Digital EXand DTS-ES, and HDTV capable componentvideo switching.

Five identical, full-bandwidth, high-current,power amp channels deliver a continuouspower output of 75 Watts per channel into8-Ohm loads; plus two surround backchannels sharing another 75 watt amplifier.

High quality linear PCM 192 kHz/24-bit D/Aconverters for all channels along with a 32-bit DSP processor deliver superb reproduc-tion of soundtracks and multichannel audio.

WRAT (Wide Range Amplifier Technology)gives the power stage a linear frequencyresponse from 10 Hz to 100 kHz to ensureit’s up to the most challenging audiosources, such as SACD and DVD-Audio.

CinemaFILTER control adjusts the tonalbalance of a movies soundtrack to performbetter in the home theater environment.

M/AM Tuner High quality AM/FM tuner section with 30

random presets, and FM auto scan tuning

75-ohm FM antenna input

FM indoor/AM loop antennas supplied

35-segment dot-matrix fluorescent display,with three level dimmer, for fast and easysetup and operation of the receiver —including “Easy-Set” variable speaker config-uration and distance settings for simpleoptimization of any speaker arrangement.

TX-SR303 5.1-Channel A/V ReceiverA cost-effective 5.1-channel A/Vsurround receiver that will work inthe real world, the TX-SR303 is entry-level, yet feature rich. It incorporatesWRAT technology with 65w perchannel x5. It has 192 kHz/24-bitDACs for all five channels and 32-bitprocessing for decoding Dolby

Digital and Pro Logic II as well as DTS and DTS Neo:6. Four composite A/V inputs and 2outputs, 2 digital inputs, 2 additional analog inputs and 5.1 multi-channel inputs keepyour home theater connected. Other features include an adjustable crossover, a remote,AM/FM tuner with 30 presets, and Late Night Mode.


ONKYO


161

TX-SR503

Absolute Ground Plate and bus bars elimi-nate ground hum for more efficient powerdistribution, less noise, and crisper sound.

Double Bass function

A/B speaker drive

A-Form Auto Format Sensing ListeningMode Memory

The adjustable crossover allows you to setthe LFE (subwoofer) channel signal to becutoff at 60, 80, 100, 120 or 150 Hz for seam-less integration of any speaker combination.This lets you more accurately match theperformance characteristics of the subwooferto the front speakers and get the best bassperformance from your speaker system.

WRATWRAT (Wide Range Amplifier Technology)for DVD-Audio and Super Audio CD(SACD) offers three significant benefits:

– Provides uncommonly low negative-feedback so you’ll enjoy cleaner soundon program peaks

– Uses closed ground-loop circuits soyou’ll enjoy greater maximum volumewithout distortion

– High-current capability means theTX-SR503 can deliver movie soundtrackswith theater-like dynamics and clarity—so you’ll get the same exciting sonicslam that you experienced in the theater.

CinemaFILTEROnkyo’s CinemaFILTER lets you soften theharshness, or brightness sometimesexperienced with movie soundtracks.That's because film soundtracks aredesigned to be played back in largetheaters, using commercial equipment,and the tonal balance of a film soundtrackcan be edgy and bright when played backover audio equipment in your home.

High Current Power SupplyHigh Current Power Supply (H.C.P.S.)transformer incorporates a huge isolatedpower supply design that, working intandem with Onkyo’s high-capacity filtercapacitors, ensures you’ll always haveready the large amounts of instantaneoushigh-current power necessary forreproducing the wide dynamics of moviesoundtracks and the detail and clarity ofyour music.

HDTV Capable ComponentVideo Switching (3 Inputs/1 Output)

How much bandwidth needed to pass acomponent video signal depends on thevideo source you are using. To pass aprogressive-scan DVD signal a receiverneeds component bandwidth of at least12 MHz and a progressive HDTV requiresapproximately 30 MHz of bandwidth forflawless transfer. The TX-SR603’s 50-MHzbandwidth is much greater than the 37MHz needed for 720p and is more thanenough for the clearest reproduction ofthe latest video signals.

Inputs and Outputs HDTV capable 50 MHz component video

switching allows the receiver to switch highdefinition video signals without degradingvideo quality.

Three component video inputs and one out

Four A/V composite inputs and two outputswith alternate S-Video connections

Front panel A/V composite and S-videoinputs for convenient connection of portabledevices.

Four assignable digital audio inputs with onecoaxial and three optical connectors.

RCA line-level connections are available for aCD player and audio recorder

Line level subwoofer preamp output

Dual banana-plug-compatible multi-wayspeaker binding posts for all main channelswith color-coding for simplified wiring, andfront channel “B” terminals for a second setof stereo speakers.

Color-coded speaker terminals take theguesswork out of matching wires to the cor-rect terminals. Simply attach the color-codedlabel to the speaker cable, and attach thecable to the same-colored speaker terminal.

Precision digital speed-sensitive volumecontrol.

Late Night (Dolby Digital only) functionreduces the dynamic range of Dolby Digitalmaterial so that you can still hear quiet partseven when listening at low volumes.

Includes a preprogrammed, RI-compatibleremote control that makes system integrationand control simple and convenient.

Conveniences

Additional Features

TX-SR573XM-Ready 7.1-Channel A/V Receiver

The TX-SR573 steps-up from theTX-SR503 with XM Satellite radiocapability and enhanced compatibilitywith Onkyo’s DS-A1 iPod control dock.Now it’s easier than ever to enjoy XMSatellite radio in your home. Using oneof the widely available XM Connect-and-Play antennas, you can subscribeto and receive 150 channels of commercial-free music, news, talk, and entertainmentprogramming directly through your entertainment system. The TX-SR573 also takes fulladvantage of the DS-A1 Remote Interactive (RI) iPod dock/charger. When an iPod is placedin the dock, it becomes a source component for both audio files and photography, lettingyou listen to your music files and view image libraries directly through your home theater.Controls for the iPod such as play, pause, stop, skip, random and playlist access can all beoperated via the TX-SR573’s enhanced RI remote control.



O N KYO162

90 Watts per channel, continuous 8 Ohm,20 Hz-20 kHz, FTC

VLSC (Vector Linear Shaping Circuitry),for the L, C, R outputs, delivers a virtuallynoiseless, smooth analog output signal

Advanced 32-Bit DSP Chip

On-Screen Display

Y/C mix circuit for monitor out

3 component video inputs and 1 output

2 audio inputs, 5 composite, S-Videocompatible A/V inputs and 3 outputs

Digital inputs assignable 4 optical(1 front panel)/2 coaxial and 1 opticaldigital output

Powered Zone 2 (5.1 surround + stereo)capability provides the ability to drive aset of stereo speakers in another roomusing the rear surround channel amplifiers,or using an external power amplifier.

Auto Speaker Set-upwith Microphone

An acoustic analyzer and high-sensitivitymicrophone automatically adjusts the soundpressure level and time delay of each chan-nel, thus ensuring that each channel is deliv-ered synchronously and with the most accu-rate frequency response from your favoritelistening spot.

Preprogrammed and Learning Remote withMacros, Mode-Key LEDs

TX-SR703 / TX-SR803XM-Ready THX Select2Certified 7.1-ChannelA/V Receivers

XM-Ready 7.1-Channel A/V ReceiverThe TX-SR603X steps up from the TX-SR573 with an automaticspeaker setup feature that makes calibrating a home theatersystem to its acoustical environment simple and fast. With theincluded microphone in the listening position, the receiversends test signals to each speaker in turn, then uses the inputfrom the microphone to adjust channel level and time delaysettings for each speaker.

Step-up Features from the TX-SR573 –

TX-SR703 Step-up Features from the SR-603X

TX-SR803 Step-up Features from the TX-SR703 105 Watts per channel into 8-Ohms

HDMI switching (2 In/1 Out) allows you to make a single connection, for audio and video,between your receiver and display. It also allows the best possible connection betweencompatible DVD players and digital Sat/Cable receivers and your Onkyo receiver.

TX-SR603X

100 Watts per channel into 8-Ohms

THX Select2 / Surround EX Certified

Ready for HDTV, Progressive Scan DVD, DVD-Audio and Super Audio CD

Multi-channel preamp outputs

Component video upconversion with TimeBase Correction

Backlit, Preprogrammed & Learning Remotewith Macros and Mode-Key LEDs

Pure Audio function bypasses all digitalprocessing to preserve the purity of analogaudio signals

7 digital inputs (five optical and two coaxial);two digital outputs (one optical, one coaxial)

Two switched AC outlets

DS-A1Remote Interactive Dock

Simply place your iPod inthe DS-A1 RemoteInteractive Dock connectedto any Onkyo RI-compatiblereceiver to experience the

powerfully rich sound ofOnkyo audio compo-nents. Control yourmusic from your RI

remote and chargeyour iPod while you enjoy your iPod’sdigital music—and photos.

Control your iPod— Power, Play, TrackUp/Down, Pause/Stop and VolumeUp/Down

S-video output for iPod Photo SlideShow

Connects to available TAPE, MD, CD-R orHDD input on receiver or audio system

Auto selector function

Time Play/Sleep Timer function

Alarm function

All cables included (RI, S-Video, Audio)

TX-Series Comparison Chart


O N KYO


163

TX-SR503 TX-SR573 TX-SR603X TX-SR703 TX-SR803

Power Specifications

Identical Full-Bandwidth Channels 5 5 7 7 7

Power Output Per Channel (8 ohm, 20 Hz-20 kHz, FTC) 75 watts/ch 75 watts/ch 90 watts/ch 100 watts/ch 105 watts/ch

Amplifier Design

Color Coded Speaker Terminals Yes Yes Yes Yes Yes

Non-Scaling Configuration Yes Yes Yes Yes Yes

192kHz/24-Bit Digital-to-Analog Converters Yes Yes Yes Yes Yes

All Discrete Output Stage Amplifiers Yes Yes Yes

Optimum Gain Volume Circuitry Yes Yes Yes Yes Yes

Home Theater Features

THX Surround EX and THX Select2 Certified – – – Yes Yes

A-Form Auto Format Sensing Yes Yes Yes Yes Yes

Composite to S-Video Conversion – – Yes Yes Yes

Composite/ S-Video to Component Conversion – – Yes Yes Yes

Multichannel Input 5.1 5.1 5.1 5.1 5.1

CinemaFILTER Yes Yes Yes Yes Yes

Digital Soundfield Processing Modes 9 32 39

Late Night Mode Yes Yes Yes Yes Yes

On-Screen Display – – Yes Yes Yes

Inputs and Outputs

Audio and AV Inputs 2/4 2/4 2/5 3/5

HDTV-Ready Component Video Input/Output 3/1 3/1 3/1 3/1 3/1

Front-Panel Video Input (with S-Video) Yes Yes Yes Yes Yes

S-Video Compatible Jacks Input/Output 4/2 4/2 5/3 5/3 5/3

Digital Inputs (Optical / Coaxial) 3/1 3/1 4/2 5/2 5/2

Digital Output (Optical / Coaxial) –/– –/– 1/0 1/1 1/1

IR Input / +12V Output – – 1/1 1/1 1/1

Subwoofer Pre Outs Yes Yes Yes Yes Yes

Multi-Channel Pre Outs – – – Yes Yes

Time Base Correction (TBC) – – Yes Yes Yes

Other Features

XM Satellite Radio Ready – Yes Yes Yes Yes

DS-A1 iPod Dock Compatibility Yes Enhanced Enhanced Enhanced Enhanced

Pure Audio Mode – – – Yes Yes

Zone 2 Composite Video – – –

Dual Banana Plug Compatible Speaker Terminals Yes Yes All All All

Sleep Timer (90 minutes; 10-min steps) Yes Yes Yes Yes Yes

Phono Input – – – Yes Yes

Zone 2 (Multisource) Line Out – – Line/Pre Out

Powered Zone 2 – – Yes Yes Yes

A/B Speaker Drive A and B A and B – – –

Number of Tuner Presets (FM/AM) 30 30 40 40 40

RI-Compatible Remote Control Prepro Prepro Prepro/ Prepro/ Prepro/Learning Learning/Backlit Learning/Backlit

FEATURE S



O N KYO164

TX-NR1000 Upgradeable Home Theater ReceiverOnkyo has now adapted the computer industry’sarchitecture of replaceable modules, upgradeablesoftware, and build-to-order marketing with theintroduction of the TX-NR1000. These will make itpossible for you to upgrade and even customizehardware and software to avoid short-term obsolescence.As new modules become available, customers will havechoices, just as they do when purchasing a computer.

150 watts of power for each of the sevenchannels driving 8-ohm speakers

All amplifier channels use WRAT (WideRange Amplifier Technology) to provide the5 Hz to 100-kHz bandwidth called for bytoday's wide-band audio modes

Excellent build-quality and premium partsare used throughout, including state-of-the-art Wolfson 192 kHz/24-bit D/A convertersfor all channels

Advanced Net-Tune capability providesaccess to internet radio or MP3 and WMAdigital music files stored on your PC — up to11 other Net-Tune client receivers can runsimultaneously on the same network.

Composite and S-Video upsampling to com-ponent video greatly simplifies switchingand connections when mixing video sourcecomponents from different generations.

Three-zone capability, five 12-volt triggers,three IR outputs, and a bi-directional RS-232port for software upgrades and connectionto home automation systems.

Future-Proof Design THX Ultra2 Network AV receiver with key

audio and video processing and interfacefeatures provided on plug-in circuit modules

Upgradeable hardware allows you to takeadvantage of future technologies and addbrand new capabilities by replacing a cardinstead of the entire receiver

Future upgrades will include high-techbroadcast reception, advanced networking,processing circuits, and even interface stan-dards that don't yet exist

High quality audio and video HDMI highdefinition multimedia interface with twoinputs and one output for compatibility withthe DVI digital video interface found on thenewest high-end AV components.

THX, Dolby, and DTS processing modes,including Dolby Pro Logic IIx.

Remarkable level of compatibility and con-nectivity with more audio/video and audio-only inputs than almost any home systemcould ever need.

Connections Seven optical and six coaxial digital audio

inputs as well as two optical and 2 coaxialdigital outputs

RCA stereo inputs and outputs, a phonoinput

Two high quality HDMI inputs and one output

A pair of iLink (IEEE1394 ) digital inputsallow bit-for-bit digital transfer of DVD-Audio and SACD audio without violatingcopy-protection controls.

Digital Input for DVD-Audio and SA-CD

Two complete seven-speaker sets of trans-parent banana plug speaker terminals.

BTL and Bi-Wiring Connectable for FL/FRwith SBR/SBL

Front Panel Optical, S-Video & A/V Inputs

4 component inputs (4 Assignable) / twoOutputs (2 Assignable)

Color-Coded Multi-Channel Inputs and 7.1-Ch Pre Outs

The TX-NR1000 Home Theater Receiverwith interchangeable card

Net-Tune Onkyo’s exclusive Net-Tune

capability uses a standard TCP/IPEthernet connection to unite thereceiver with MP3 and WindowsMedia Audio (WMA) files storedon a home PC, or to accessInternet radio streams via anetworked broadband Internetconnection.

The receiver’s on-screen display shows song title, artist, album, genre, and playlistinformation, making the entire family's music collection easy to store and access.

Up to 11 other Net-Tune clients can connect to the same network, all deliveringsimultaneous and independent access to music stored on a central PC.

SA-XR50 • SA-XR70


PANA SONIC


165

FEATURE S

Home Theater ReceiversRecognizing the need for high quality performancewith easy set-up, Panasonic has designed tworeceivers that will let you access the full benefitsof home theater entertainment in elegant, slimand sleek units. The SA-XR50 and SA-XR70 arefully digital receivers that feature extendedfrequency response up to 88kHz. This providesrich reproduction of the ultrahigh frequencyrange that affects the musical ambience andmood. The SA-XR70 adds an HDMI (High-Definition Multimedia Interface), which simplifiesthe connection to other audio/video sources and provides high quality audio and video playback. HDMI transmits digitaland audio signals at speeds of up to 5GB per second without compression — this produces extremely pure sounds freefrom noise and signal degradation and allows for high quality audio and video with fewer cables.

Amplifier Section High Efficiency Digital Amplifier

100W per channel, stereo, (20Hz - 20kHz, 6ohms, 0.09% THD); 100W per channel, hometheater mode, (6 channels, 1kHz, 6 ohms,0.9% THD)

Six discrete inputs channels

DVD-Audio ready

Inputs/Outputs Five analog audio inputs and two outputs

Two optical and two coaxial digital audioinputs; one optical output

Two component video inputs and two out-puts; three S-Video inputs and one output;four composite inputs and two outputs

Large speaker terminals for speaker A

Conveniences Speaker Size Configuration function (except

the left/right channels) optimizes the outputfor accurate sound reproduction, regardlessof speaker size.

A and/orB speaker selector

Illuminated Universal Remote Control

Processing Full-digital processing — Panasonic ampli-

fiers use digital processing from signal inputall the way through to output, letting youenjoy the full potential of today's mostadvanced audio sources. You get extremelyclear, powerful sound with remarkabledepth, richness, and presence.

Dolby Digital EX decoder; DTS Decoder(DTS-ES, NEO:6, DTS 96/24); Dolby Pro LogicII surround

SFC (Sound Field Control)

Music:Live, Pop/Rock, Vocal, Jazz, Dance, Party

Video/Movie:Drama, Action, Sports, Musical, Game, Mono

Multi-Source Re-Master adds home-theater-like sound quality to compressed music filessuch as, MP3 and WMA files as well as AC-3which is used for DVDs. Re-master process-ing helps to compensate for any frequencieslost due to compression during recording,providing a rich sound field.

Subwoofer Output

4Hz - 88kHz frequency response (±3dB)

They measure 39⁄32˝ x 1615⁄16˝ x 1413⁄16˝ (H x W x D); 9.3 lbs

AM/FM Tuner Digital Synthesizer AM/FM Tuner (Frequency

Range - FM Tuner: 87.9-107.9MHz, AM Tuner:530-1710kHz)

SA-XR70 Step-up Features HDMI (High Definition Multimedia Interface)

supports high-definition images up to1080p, and high quality, multi-channelaudio formats such as DVD-Audio through asingle wire digital connection.

Multi-Channel Multi-Drive with DigitalLinear Phase harnesses the amplifier’s fullcapabilities when reproducing two-channelsound and applies an electronic delay to thesurround channel amplifier so both high-fre-quency and low-frequency sounds reach theear at the same time for incredible acousticimaging.

Built-In DTS 96/24, DTS-ES, Dolby Digital EXand Dolby Pro Logic IIx decoders

Bass Synthesizer: delivers superior basssound by helping to reinforce the low fre-quencies.

Two component video inputs and one out-put; four S-Video inputs and one output

Front panel S-Video input



P I O N E E R

VSX-D515/D815/D915/D1015TX

166

The VSX-D515, VSX-D815, VSX-D915 and the VSX-1015TX

are all designed to give end-users the ultimate control

over their home entertainment experience. Each is

DVD-Audio and SACD ready, and all except the VSX-D515

offer Pioneer’s automatic multi-channel acoustic

calibration (MCACC), giving you the ability to easily and

accurately set-up speakers with optimal performance

based on your room environment. Each receiver offers

component and S-Video switching to allow both

progressive and interlaced NTSC and HDTV signals to be passed to the television or monitor. To maintain future compatibility,

they each have multiple, assignable digital inputs (both coaxial and optical). All come with either a standard remote or a pre-

set/learning remote and Quick Setup feature for easy room setup. The Quick Setup feature walks you through the set-up

process choosing the number of speakers connected and selecting the room size for very easy and accurate surround sound

performance when you don’t want to use the MCACC function.

The VSX-D515 features built-in DTS, DTS-ES , DTS 96/24, NEO 6, Dolby Digital, Dolby Digital EX and Pro Logic II decoders,110 watts x 6 channels, Windows Media Audio 9 decoding, Virtual Surround Back mode, Midnight Listening mode, threedigital inputs, component video inputs/outputs and subwoofer pre-out.The VSX-D815 steps-up with Pro Logic IIx, 100 watts x 7 channels, automatic MCACC, five digital inputs, digital optical output

and dual surround back speaker capability

The VSX-D915 steps-up with 110-watts x 7 channels. The top-of-the-line VSX-D1015TX steps-up with 120 watts x 7 channels

and THX Select designed for high-impact multi-channel audio in rooms of up to 2,000 cubic feet.

Amplifier Section Hybrid amplification system ensures that

the correct amount of bias signal is appliedto each transistor for very low distortion.

6.1 channel input with 100 watts of equalHigh Power for all six channels

The Loudness listening feature providesenhanced bass and treble response frommusic sources at low volume levels.

Inputs and Outputs Three analog audio inputs

Subwoofer preout

6-Channel Stereo

Two coaxial and one optical digital inputs

Two component video inputs and one input

Three S-Video inputs and two outputs

Banana clip-type speaker terminal

Processing Built-in DTS, DTS-ES , DTS 96/24, NEO 6,

Dolby Digital, Dolby Digital EX and Pro LogicII decoders

Virtual Surround Back Mode deepens thesound stage by creating a “phantom” rearsurround effect without the use of surroundback speakers.

6-channel stereo mode simulates a regularstereo acoustic environment while using allthe speakers in the system to create originalsurround modes.

Expanded Theater mode expands the depth,breadth and dynamics of Dolby Surroundsources, for more faithful reproduction of 5-channel sound.

DVD-Audio/SACD Ready

192kHz/24-bit digital to analog convertersfor all channels

Advanced surround

Conveniences AM/FM tuner with 30 station presets

Easy-to-use Smart Remote control is fullycapable of operating Pioneer’s DVD players

Quick Set-up function offers the ultimatein convenience. Just input the room sizeand number of connected speakers; andthe optimal levels and delay areautomatically set.

Tuner Edit Operation

Midnight Listening Mode allows you to heareffective surround sound of movies at lowvolume levels. The effect automaticallyadjusts according to the volume at whichyou’re listening.

Fluorescent display with four level dimmer

V S X - D 515 F E AT U R E S

VSX-D515/D815/D915/D1015TX


PIONEER


167

7.1 channels with 100 watts of equal highpower for all seven channels

Built-in Dolby Pro Logic IIx decoder

DVD-Audio/SACD Ready

Inputs and Outputs Four analog audio inputs and 4 A/V inputs

7.1 channel preamp outputs

7-Channel Stereo

Two coaxial, two optical, and one front paneloptical digital input; one optical output

Three component video inputs and one out-put; four S-Video inputs and two outputs

Front A/V inputs

Conveniences Room size and shape, floor and wall

textures, the quality and size of yourspeakers affect system performance.Automatic MCACC (Multi-Channel AcousticCalibration System) Set-up, with a 5-bandEQ, and microphone helps you fine tuneyour speakers to the room you’re in.

Advanced Quick Set-up

Pre-programmed LCD Remote

Advanced Direct Energy MOSFET construc-tion uses heat compensation in the powerchip and an AC/DC isolated amp module tominimize power imbalances that can distortthe sound stage. This offers high-power dri-vability, ultra-efficient amplification, stableimaging, and low energy loss.

THX Select certified

Component video up conversion

Five S-Video inputs

Surround back speakers can be used as a2nd zone for use with an alternate audiosource

7.1 channels with 110 watts of equal highpower for all seven channels

LCD learning remote

Up conversion from composite video toS-Video

VSX-1015TX-K VSX-D915-K VSX-D815-K/S VSX-D515-K/S

Amplification 120 watts x 7 110 watts x 7 100 watts x 7 110 watts x 6

Auto Multi-Channel Acoustic Calibration 5-band EQ (w/mic) 5-band EQ (w/mic) 5-band EQ (w/mic) –

THX Yes – – –

DVD-Audio Ready Yes Yes Yes Yes

WMA9 Pro Yes Yes Yes Yes

Video converter Yes component Yes S-video – –

Component Video Switching Yes x 3 Yes x 3 Yes x 3 Yes x 2

Assignable digital inputs 5 5 5 3

Front panel 1A/1V/1 optical 1A/1V/1 optical 1A/1V/1 optical –

A/V inputs 3A, 5 A/V 3A, 5 A/V 4A, 4 A/V 3A, 3 A/V

S-Video inputs/outputs 5 in, 2 out 5 in, 2 out 4 in, 2 out 3 in

5.1 channel inputs Yes Yes Yes Yes

All channel pre-outs Yes Yes Yes Subwoofer Only

192/24-bit DAC Yes Yes Yes Yes

48-bit Motorola DSP Yes Yes Yes Yes

V S X - D 915 S T E P - U P F E AT U R E S

V S X - D 10 15 T X S T E P - U P F E AT U R E S

V S X- D 8 15S T E P- U P F E AT U R E S



S O NY

STR-DE598/698/898/998

168

FEATURE S

A/V ReceiversWhether it’s DVD, digital satellite, cable,broadcast TV or even HDTV or whether it’sDolby Digital, DTS or Dolby Pro Logic IIxdecoding, Sony’s audio/video receivers arepacked with advanced audio and videoperformance features. They are designedto address virtually all of the requirements oftoday's highly demanding home audio environments.The line starts with the entry level STR-DE598 that delivers 90 wattsof power, 6.1 channel surround sound as well as advanced audio features such as Dolby Digital EX, DTS-ES and DigitalCinema Sound processor. The STR-DE698 steps up with 7.1 channel surround sound with 100 watts of power. The STR-DE898is also a 7.1 channel A/V receiver, but adds component video up-conversion from S-Video and composite sources, 2 zone/2 room audio outputs as well as assignable digital inputs. The top-of-the-line STR-DE998 is a 7.1 channel audio/videoreceiver which offers 110 watts of power per channel. It also incorporates advanced audio technology and an enhanceduser interface for dynamic and comprehensive operation.

Surround Mode Power Output, allchannels driven, 90 watts x7 into 8 Ohms

3 optical and 2 coaxial digital inputs/1-output

Three S-Video inputs and one output

Control A1 II interface enables a receiver tocommunicate with other Sony audiocomponents with the same interface

Pre-programmed remote works with manynon-Sony components

STR-DE898 Step-up Features Surround Mode Power Output, all

channels driven, 100 watts x7 into 8 Ohms

Component Up-Conversion from Compositeand S-Video

4 optical and 1 coax digital input/1-output

32-bit DSP with 13 acoustic environments

Analog direct allows you to bypass digitalpressing when playing back analog sourcematerial

15 Sound Field Modes

Phono input

5.1 and 7.1 multi-channel audio inputs

Second zone audio output

Preprogrammed, learning, macro remotecontrol

STR-DE998 Step-up Features Surround Mode Power Output, all channels

driven, 110w x7 into 8 Ohms

Multi-room audio output uses an independ-ently-selectable line output that makes yourmusic available to a system in another room.

Preprogrammed, learning remote w/LCD

Surround mode power output delivers 90watts of equal power, into 8 Ω for all six-channels

5.1 input with surround control lets you con-nect a 5.1 channel source and still enjoy thebenefit of the receiver’s powerful processing.

32-bit decoding — Dolby Digital/Digital EX,DTS 96/24, DTS ES and Dolby Pro Logic II / IIx

Dolby Digital adjustment lets you match thedecoder output to your specific speakerset-up and listening room.

32-bit DSP with 11 acoustic environments

Cinema Studio EX modes provide closerapproach to true theater sound with twoadditional corrections: First they process thefront sound to enlarge the apparent distanceto your TV. Second, they recreate the the movietheater’s array of surround speakers bygenerating 10 virtual surround speakers.

Two optical and one coaxial digital input

Digital Cinema Sound Studio Modes digitallyrecreate acoustic environments based onactual measurements made at top dubbingstages in Hollywood.

Virtual Dolby Surround provides surroundsound effect—without rear speakers

Sound Field Modes (Movie, Music, AFT, 2 Channel) --- Movie: 3 Modes; Music: 3 Modes; AFT: 4 Modes; 2 Channel: 1 Mode

Sound Field Link let's you apply the lastselected sound field to an input whenever itis selected.

Variable Delay Time adjusts the surroundsound to match your listening room andspeaker setup. Synchronizes the arrival ofsound from all the different speakers.

UniCommander Remote also controls SonyTVs.

STR-DE598

STR-DE698 Step-up Features

STR-DE598/698/898/998 Comparison Chart


S O NY


169

STR-DE598 STR-DE698 STR-DE898 STR-DE998Stereo Mode Power Output 90 W/Ch (8 Ohms, 100 W/Ch (8 Ohms 100 W/Ch (8 Ohms 110 W/Ch (8 Ohms

(40Hz-20kHz, THD 0.7%) 20-20kHz, .09% THD) 20-20kHz, .09% THD) 20-20kHz, .09% THD)

Surround Power Output 100 Watts x 6 (8 Ohms, 100 Watts x 7 (8 Ohms, 100 Watts x 7 (8 Ohms, 110 Watts x 7 (8 Ohms,

1kHz, THD 0.7%) 1kHz, THD 0.7%) 20-20kHz, .09% THD) 20-20kHz, .09% THD)

Equal Power to all Channels Six Seven Seven Seven

Dolby Digital, Dolby Digital EX, Dolby Pro Logic (II / IIx) Yes/Yes/Yes Yes/Yes/Yes Yes/Yes/Yes Yes/Yes/Yes

dts ES, dts:Neo:6, DTS 96/24 Yes/Yes/Yes Yes/Yes/Yes Yes/Yes/Yes Yes/Yes/Yes

32-Bit Dolby Digital, Dolby Pro Logic and dts decoder Yes Yes Yes Yes

Digital Signal Processing (DSP) 32-bit 32-bit 32-bit 32-bit

DSP Acoustic Environments 11 11 13 13

Digital Cinema Sound System Yes Yes Yes Yes

Cinema Studio EX Modes Yes Yes Yes Yes

Soundfield Modes 15 14 14 14

Sound Field Link Yes Yes Yes Yes

Analog Direct – – Yes Yes

AM/FM Presets 30 30 30 30

A/B Speaker Switch A and B/A or B A and B/A or B A and B/A or B A and B/A or B

Circuit Device (Discrete) Yes Yes Yes Yes

Multi-Channel Analog Inputs 5.1 5.1 7.1 5.1 & 7.1

Front Composite A/V Inputs Yes Yes Yes w/optical Yes w/S-Video, optical

Analog Audio Inputs/Outputs 6/2 7/2 8/3 8/3

Composite Video Inputs/Outputs 3/1 4/1 5/2 5/3

S-Video Inputs/Outputs –/– 3/2 3/2 4/2

Video Monitor Output (Composite/S-Video) 1/– 2/1 1/1 1/1

Component Video Inputs/Outputs (HD Pass 80 Mhz) 2/1 2/1 2/1 2/1

Component Up-Conversion from Composite and S-Video – – S-Video Yes

Assignable Digital Inputs – – Yes Yes

Optical Digital Inputs/Outputs 2/– 3/1 4/1 4/1

Coaxial Digital Input 1/– 2 2 2

Phono Input – – Yes Yes

Headphone Output Yes Yes Gold Plated Gold Plated

2nd Zone Audio Output – – Yes Yes

Multi-Room Audio Outs w/ Independent Source Selection – – – Yes

Control S Interface Inputs/Output – – – 1/1

Control A-II Interface – Yes Yes Yes

Preamp Outputs Subwoofer Subwoofer Subwoofer Subwoofer

Remote Control Uni-Commander Remote Commander Remote Commander LCD Remote Commander

Pre-Programmed with Learning Macros with Learning Macros

AC Outlet (switched) 1 1 2 2

Finish Black Black Black or Silver Black



YA M A H A

HTR-5830/5840/5850/5860/5890

170

Natural Sound Home Theater ReceiversYamaha A/V receivers are ready for all audio andvideo formats. They offer DTS-ES, Dolby Digital andDolby Pro Logic II decoding, with 192kHz/24-bitdigital-to-analog converters that deliver state-of-the-art 5.1-, 6.1- and 7.1-channel surround soundfrom DVD and HDTV broadcasts. Equipped withYamaha’s exclusive Cinema DSP, they create richand deep independent sound fields that envelopelisteners in an unmatched surround sound experience.Night Listening Enhancer ensures that listeners won’t miss quiet passages or lose surround spaciousness during low-volumelistening. Silent Cinema provides private listening enjoyment of multi-channel music or movie sound, including DolbyDigital and DTS Surround, through ordinary headphones. For convenience, they include a pre-coded, easy-to-use remotewith keypad arranged for easy access. The HTR-5830 delivers 110 watts (6 Ohms, 1kHz) of equal power for five channels with three assignable digital inputs, theHTR-5840 steps up with 100 watts (8 Ohms, 1kHz) of equal power for six channels and adds Pro Logic IIx, DTS 96/24 andaudio delay for adjusting lip sync. The HTR-5850 goes to 105-watts (8 Ohms, 1kHz) and adds S-Video Up conversion. TheHTR-5860 offers 110 watts (8 Ohms, 1kHz) of equal power for seven channels, 9-channel speaker output, 7.1-channel

external decoder input, Dialogue Lift, assignable poweramp, and YPAO with microphone for automaticallyoptimizing the sound in the room. The top-of-the-lineHTR-5890 offers 140-watts (8 Ohms, 1kHz) of equalpower for seven channels, Component Video UpConversion, THX Select Processing, +12v trigger outputs,IR ports, and multi-room compatibility (Zone2/Zone3).

5.1 channel surround sound with 110 wattsper channel into 6 ohms (550 watts total)

Dolby Pro Logic II, Dolby Digital Surround,DTS and DTS Matrix 6.1 decoding.

High performance 192kHz/24-bit D/Aconverters perform accurate sound fieldreproduction for high quality multi-channelsources, and for two-channel stereo,providing outstanding separation andprecise musical delineation.

Yamaha’s Quad-Field Cinema DSP imagingfor video sound and Digital Sound FieldProcessing for music provides 21 differentsound programs with a total of 41 variationsto deliver the most realistic and dramaticsound possible.

Digitally Regulated Volume Control lets youmake delicate adjustments within a narrowrange, yet enables you to accurately move tovery high or low levels quickly.

Yamaha’s five-channel stereo DSP putsmusic through all speakers in the systemwhile maintaining stereo imaging — greatfor casual listening and parties.

Yamaha's famed low impedance drive cir-cuitry can handle virtually all loads and awide variety of speakers and can be set foreither 4-or 8-ohm speakers.

Silent Cinema provides private listeningenjoyment of multi-channel music or moviesound, including Dolby Digital and DTSSurround, through ordinary headphones.

FEATURE S

Inputs & Outputs Two component in and one component

video output

Four composite video inputs and 2 outputs

Two audio only analog inputs and oneanalog output.

Two optical and one coaxial digital inputaccommodate digital sources such as DVD,CD, Cable/Sat, or a video game console.

A subwoofer pre-out is provided for addingan outboard amp or a powered subwoofer.

Yamaha’s heavy-duty binding post speakerterminals, accept banana plugs, spadeconnectors, and a variety of speaker wire,including heavy gauge cable.

HTR-5830/5840/5850/5860/5890


YAMAHA


171

AM/FM Tuner Up to 40 preset AM and FM stations can be

grouped in five groups eight stations. Thesegroupings make it easy for family membersto easily access their favorite stations or tohave musical genres, such as all the jazzstations, grouped together.

Conveniences A/B speaker switching allows you to switch

between two sets of speakers at the touchof a button, or run two pair of main speakerssimultaneously.

The sleep timer permits a delayed receiverturn off. You can set it for up to two hours in30 minute increments.

5-band center graphic equalizer

Analog mixdown for the center, surroundand subwoofer

The included remote control has built-inpreset codes for most other manufacturersequipment, so you can use it as a singleremote for the entire system.

6.1 channel surround sound with 100 wattsper channel (600 watts total)

XM Satellite Radio ready with access to over130 digital radio channels, using optionalconnect and play antenna

Dolby Pro Logic IIx, DTS Neo:6, DTS-ESDiscrete 6.1 and DTS 96/24

29 surround programs with Quad-FieldCinema DSP

The adjustable subwoofer crossover providesa choice of nine frequencies deliveringmaximum efficiency and performance.

Subwoofer Phase Selection provides phaseswitching for improved bass response.

Night Listening Enhancer, for both cinemaand music modes, enures that you will notmiss quiet passages or lose surroundspaciousness during low-volume listening

Digital ToP-ART (Total Purity AudioReproduction Technology) is the nameYamaha has given to a design philosophywhose goal is to maximize signal purity.

7-band center graphic equalizer

Audio Delay for adjusting lip-sync(0–160 ms)

Three-step audio mute

Easy to use colored button remote


Component video up-conversion, with fullHDTV (720p/1080i) compatibility, allows youto use the best possible cable connectionbetween the receiver and your TV.

Three optical digital inputs and one coaxialdigital input and one optical digital output

Direct Stereo mode for the highest quality2-channel sound reproduction

Available in black and silver

H T R - 5 8 4 0 S T E P - U P F E AT U R E SHTR-5830 CONTINUED

H T R - 5 8 5 0 S T E P - U P F E AT U R E S

XM Satellite Radio Ready Using XM’s revolutionary Connect-and-Play technology and any of Yamaha’sXM Ready home theater receivers,including the HTR-5840, HTR-5850 andHTR-5860, you can enjoy over 130channels of near-CD quality music,sports, talk, comedy, drama, news, traffic,weather and more. All you need to accessthe crystal clear digital sound of XM isthe Connect-and-Play antenna accessory.Hear satellite radio as never before - witha fully integrated system from Yamaha.

Song title, album and artist info auto-matically show up on receiver’s display

Hear what you want, when you want.

Over 130 Digital Channels

100% Commercial Free Music

24/7 Instant Traffic / Weather

Official Satellite Radio Network ofMajor League Baseball

Near-CD Digital Quality



YA M A H A

HTR-5830/5840/5850/5860/5890 AV Receivers

172


7.1 Channel external decoder input

Nine channel speaker output

YPAO technology uses a small (included)microphone and sophisticated equalizationsystem to optimize the sound of your hometheater system, regardless of the position ofyour speakers

On-screen display

Surround back power-amp assignable forpresence channels — for the ultimatesurround sound system

Pure Direct mode bypasses all of thereceiver’s internal DSP circuitry to deliverthe purist possible signal. It can be usedwith either analog or digital sources.

Six digital inputs: four optical and twocoaxial; and one optical output

Dialog lift for enhanced sound output


THX Select processing

Surround back power-amp assignable forpresence channels or zone 2 audio source

Multi-room Zone2/Zone3 capability andspeaker B

Direct-Access (macro-command, learningand preset capable) remote control unitwith macro-command buttons

IR I/O ports and +12V trigger output

Audio Delay for adjusting lip-sync(0–240 ms)

A total of eight digital inputs (five opticaland three coaxial) are available

Two optical digital outputs

Phono input

(The HTR-5890 does not offer optionalXM Satellite radio or subwoofer phase select)



Silent CinemaSilent Cinema technology enables youto enjoy the benefits of digital surroundat any time of day without disturbingmembers of your household.SilentCinema is made possible by usingYamaha’s custom designed LSI (LargeScale Integration) chip sets, which utilizea Cinema DSP algorithm for three-dimensional sound based on HRTF (HeadRelated Transfer Function). As an addedconvenience, when headphones areplugged in, the speaker outputs turn offautomatically, and the receiver switchesto the SILENT CINEMA mode.

YPAO —Yamaha ParametricRoom Acoustic Optimizer

Yamaha’s uniqueYPAO Systemanalyzes theacoustics of yourroom and adjustsvarious speaker parameters to provideoptimum sound. Using the includedoptimizer microphone placed in thelistening position, and the receiver's built-in parametric equalizer, the YPAO Systemtakes into account 5 variables for tuningyour system: proper speaker connectionsand phase; speaker distance from thelistening position; speaker size andsubwoofer crossover frequency, speakerfrequency response, and Sound PressureLevel alignment. The system is automatic— simply activating the YPAO Systemcauses test tones to be emitted from thespeakers. These tones are picked up bythe optimizer microphone and analyzed.

Cinema DSP DigitalFeatured in Yamaha Digital Home TheaterComponents, this amazing technologymakes the sound from movies (andmusic, too) much more thrilling andrealistic than anything you’ve ever heardfrom a home system. You’ll discoverthe full possibilities of home theaterentertainment with Yamaha CinemaDSP components.

HTR-Series Comparison Chart


YAMAHA


173

HTR-5890 HTR-5860 HTR-5850 HTR-5840 HTR-5830

Amplifier Section

Channels 7 7 6 6 5

RMS Power Output 140W x 7 110W x 7 105W x 6 100W x 6 110W x 5

Total Power 980W 770W 630W 600W 550W

Preamplifier Section

Dolby Digital EX Yes Yes Yes Yes Matrix 6.1

DTS-ES Discrete 6.1 Yes Yes Yes Yes Matrix 6.1

DTS 96/24 Yes Yes Yes Yes –

Dolby Pro Logic IIx Yes Yes Yes Yes Dolby Pro Logic II

DTS Neo:6 Yes Yes Yes Yes –

Pure Direct Yes Yes – – –

Surround Programs 16 14 14 14 14

THX Processing Select – – – –

Component Video Up-Conversion Yes Yes Yes – –

Multi-Channel External Input 8 Channel 8 Channel 6 Channel 6 Channel 6 Channel

Audio/Video Inputs and Outputs

Digital Input 5 Optical / 3 Coaxial 4 Optical / 2 Coaxial 4 Optical / 1 Coaxial 2 Optical / 1 Coaxial 2 Optical / 1 Coaxial

Digital Outputs 2 optical 1 optical 1 optical No No

Component Video Inputs / Outputs 2/1 2/1 2/1 2/1 2/1

Rear A/V Inputs Composite/S-Video 6/6 4/4 4/4 4/4 4/0

Rear A/V Outputs Composite/S-Video 2/2 2/2 1/1 1/1 1/1

Rear Monitor Outputs Composite/S-Video 1/1 1/1 1/1 1/1 1/1

Front Panel Video Aux Input Yes (Optical/S-Video) Yes (Optical/S-Video) Yes Yes –

Audio Inputs 4 2 2 2 2

Multi-Channel External Input 8 Channel 8 Channel 6 Channel 6 Channel 6 Channel

Phono Input Yes No No No No

Other Features

XM Satellite Radio Ready – Yes Yes Yes –

YPAO Automatic Optimization Yes Yes – – –

On-Screen Display Yes Yes – – –

Assignable Power Amp Yes Yes – – –

RS-232C Interface Yes – – – –

Zone 2 Output Audio Only – – – –

Zone 3 Audio Output Yes – – – –

+12V Trigger / IR Port Yes/Yes –/– –/– –/– –/–

9 Channel Speaker Outputs Yes Yes – – –

Dialogue Lift Yes Yes – – –

Speaker A, B or A+B Selection Yes Yes Yes Yes Speaker A or B

Selectable Subwoofer Crossover Yes Yes Yes Yes –

Subwoofer Phase Select – Yes Yes Yes –

General

Detachable Power Cord Yes – – – –

Learning Remote Control Yes – – – –

Dimensions (WxHxD) 171⁄8˝ x 63⁄4˝ x 171⁄16˝ 171⁄8˝ x 63⁄4˝ x 169⁄16˝ 171⁄8˝ x 63⁄4˝ x 169⁄16˝ 171⁄8˝ x 65⁄16˝ x 163⁄8˝ 171⁄8˝ x 515⁄16˝ x 123⁄8˝

Weight 34.2 lbs. 27.8 lbs. 24.2 lbs. 24.2 lbs. 19.8 lbs.

Documents

#4 Receivers (142-173)A/V RECEIVERS Introduction to A/V Receivers 144 Surround Sound At the heart of the receiver is the surround-sound processor. The most basic surround processors