Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
4 Drawer dresser (5522) - Assembly and Operation Manual
Congratulations on purchasing an MDB Family product. This product will provide many years of service if you adhere to the following guidelines for assembly, maintenance and operation. This product is for residential use only. Any institutional use is strictly prohibited.
Please be sure to follow the instructions for proper assembly. Use a Phillips head screwdriver for assembling the product in addition to the Allen wrench included in the hardware box. Do not use power screwdrivers. All of our products are made from natural woods. Please understand that natural woods have color variations which are the result of nature and not defects in workmanship.
DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND HARD-WARE. YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLIS-TIC VARIATIONS.
revised 23JUN2015 page 1
HARDWARE
Tools Needed(not included)
Phillipsscrewdriver
H11. Right Panel Glide (4) H13. Right Drawer Glide (4)
H14. Left Drawer Glide (4)H12. Left Panel Glide (4)
H1. Cam Lock Bolt (18)
H15.Knob (8)
H4. 1-1/2” WoodScrew (8)
H5. 1-1/4” Wood Screw (16)
H7.Wood Screw with Washer Head (2)
H3. Knob Bolt (8)
H8. Support BarFastener (12)
H9. Wood Dowel (4)
H10. PlasticPlug (4)
H6. 1/2” Wood Screw (112)
H2.Cam Lock (18)
page 2
PARTS
(Q)Back Suppo rt Bar x 1
B1. LeftEnd Panel
A1. RightEnd Panel
E1. Dresser Top
J. Right Drawer Panel (4)
K. Left Drawer Panel (4)
M. Front Drawer Panel (4) O. Back Drawer Panel (4)
D1. Back Panel (2)
N1. Base Panel
C. DrawerBottom
Board (4)
P1. Leftleg (2)
P2. Rightleg (2)
H. Front Support Bar (5)
Q. Back Support Bar
B
Assemble dresser end panels, support frames and support bars.
Make sure top support frame (G) is placed with counter-sunk holes facing down.
Use screws (H6) and support bar fastener (H13) to mount support bars (H) and (Q) to the left and right end panels (A) and (B).
Place bottom frame support frame (F) with counter-sunk holes facing up.
1
2
H
H
H
H
H
Q
B1 A1
H6H6
H6
H6
H11
H6 H6 H6
H12
H6 H6 H6
ASSEMBLY INSTRUCTIONS
DO NOT OVERTIGHTEN.
DO NOT OVERTIGHTEN.
H11
A1 B1
H11
H11
page 3
X12
X3
X3
H12
H12
H12
H8
4
3
page 4
H1H1 H1
E1
H1H1H1
H2
H1
X6
DO NOT OVERTIGHTEN.
H2
* Rotate H2 clockwiseto secure.
H2
H2H2
H2
H2
X4
H1 X4
H4H4
H10
H9
X4P1
P2
P2
P1
N1
A1B1
DO NOT OVERTIGHTEN.
H2
* Rotate H2 clockwiseto secure.
5
page 5
DO NOT OVERTIGHTEN.
H11
N1
A1
H12
N1
B1
B1
N1
H6H6H6
H6H6
H6
A1
H6
H6
H6
H6
H6
H6
6
DO NOT OVERTIGHTEN.
D1
D1
H6H6H6H6
H6H6
H6H6
H6H6
H6 H6 H6H6
H6H6
H6
X16H7 H7
H7
D1
D1
X2
page 6
N1
7a
H1
7b
* Rotate H2clockwiseto secure.
H1
K
JH1
M
7DRAWER ASSEMBLY INSTRUCTIONS
page 7
H2
H2
H2
pag
C
O
H5
H5
O7c
7d
page 8
H6
H14
H6
H13
M
H6 H6 H6
M
page
X4
H15K
J
H15
M
H3
H15
X2
MH3
H3
This item has a manufacturer’s limited one year warranty. Visit our web site at www.themdbfamily.com for more information.
This item has a manufacturer’s limited one year warranty. Visit our web site at www.themdbfamily.com for more information.
Drawer AssemblyStep 6B. Drawer Assembly
Step 6C.
Drawer AssemblyStep 6D.
Drawer AssemblyStep 6E.
Drawer AssemblyStep 6F.
Insert the assembled drawers.
page 5
7
7e
8
page 9
9
Serious or fatal crushing can occur when furniture tips over on children. To help prevent tip-over, follow the steps below to install this anti-tipping strap.
FURNITURE ANTI-TIPPING KIT INSTALLATION
Phillipsscrewdriver
Tools Needed (not included)
PencilStubby
Screwdriver
X 2X 1 X 1
X 1
Locate a 2” x 4” stud behind the wall, and make a mark.
9a
2” x 4” wall stud
9bInstall the strap on the wall with long screw and washer.
WARNING
Use of tip-over restraints may only reduce,but not eliminate, the risk of tip-over.This is permanent label. Do not attempt to remove!
Serious or fatal crushing injuries can occur from furniture tip-over. To help prevent tip-over:
Place heaviest item in the lowest drawers.
Never allow children to climb or hang ondrawers, doors, or shelves.Never open more than one drawer at a time.(OR)Do not defeat or remove the drawer interlocksystem.
do not set TVs or other heavy objects on top of this product.
Unless specifically designed to accommodate,
Install tipover restraint provided.
page 10
9cInstall the other end of strap on the back of dresser with short screw and washer into the wood framing of the dresser.
Finish
KEEP THIS MANUAL IN A SAFEPLACE FOR FUTURE REFERENCE.
READ ALL INSTRUCTIONS BEFORE USING THE PRODUCT. KEEP THE
INSTRUCTIONS FOR FUTURE USE.
Safety Notes:• Do not allow your children to climb or jump on the furniture or in the drawer. Climbing on the furniture could make it top-heavy and cause the furniture to damage or tip over.• Never move or push heavy furniture by yourself as it can cause the furniture to tip over.• This furniture is not intended to support TV or other heavy items.• Do not overload the drawers.
O ORDER
T US BY MAIL:
Registering your product is even easier thanbefore. You can register your product on our website at : www.themdbfamily.comIF YOU WOULD LIKE TREPLACEMENT OR MISSING PLEASE VISIT US AT:WWW.THEMDBFAMILY.COMOR YOU CAN CONTACMDB FAMILY855 WASHINGTON BLVD.MONTEBELLO, CA 90640
Storage: Pine woods exchange moisture with the air adjust-ing to major changes in room temperature and humidity. Therefore, it is best to place your furniture away from heating or air-conditioning vents. Sunlight is not friendly to solid wood furniture and prolonged direct exposure to harsh sunlight can discolor the finish. Be careful not to place your furni-ture in direct sunlight for extended periods of time. As with all your fine furniture, blot up spills immediately.
•
•
Care and Cleaning:• Do not scratch or chip the finish. Do not use abrasive chemicals for cleaning. Clean with mild soap on a damp, soft rag. Rinse and dry thoroughly. If you ever refinish this furniture, be sure to use only a non-toxic finish specified for children’s products. If you choose to refinish this furniture, the warranty will be voided.
page 11