©2014 Select Comfort 7/14

Before assembling your new SLEEP NUMBER® bed, set up your new SleepIQ™ system. It will take approximately 10-20 minutes for you to set up your SleepIQ™ system. If you have any questions, please call us at 888-484-9263.

What you’ll need:

• An iPhone® 4S, iPad® 3, iPad mini™ or iPod touch® 5G mobile device, or newer version compatible with iOS 6 or later

• An active SleepIQ™ account

• The SleepIQ™ app from the App Store

• Your home Wi-Fi network name and password (case-sensitive)

• Locate the box labeled “Firmness Control™ system with SleepIQ™ technology” and identify each of the following components: SleepIQ™ Firmness Control™ system, power cord, remote, batteries. (A SleepIQ™ USB flash drive is included, but not needed for iOS installation.) Set the remote and batteries aside for now. The remote will be activated during mattress assembly.

Connecting your Firmness Control™ system to your home Wi-Fi network

1. Turn on your iOS device’s Bluetooth.

2. Ensure that the SleepIQ™ Firmness Control™ system is NOT plugged into a power source.

3. Open the SleepIQ™ app on your iOS device and log in with the SleepIQ™ account information you previously set up at sleepiq.sleepnumber.com.

4. Plug the Firmness Control™ system into a working outlet or surge protector.

5. The SleepIQ™ app will prompt you to link your bed.

6. Select your bed from the list and choose Next.

7. Select the home Wi-Fi network name you wish to use with your Firmness Control™ system and choose Next. Enter your home Wi-Fi network password.

8. The SleepIQ™ app will complete several processes.

9. The five LED lights above the door on the back of the Firmness Control™ system will blink and flash during the connection process shown in the step above. This may take up to 10 minutes.* Five solid LED lights indicate you are connected to your home Wi-Fi network. NOTE: If the second light from the left continues to blink, this is normal and you may proceed.

*After 10 minutes, if any lights (other than the second light from the left) remain unlit or continue to blink, visit sleepnumber.com/chat to chat with

one of our sleep professionals, review the FAQs at sleepnumber.com/customer-service/sleepiq-faq or call us at 888-484-9263.

10. Use your SLEEP NUMBER® bed assembly guide and SLEEP NUMBER® remote to complete assembly of your bed. NOTE: If your Sleep Number bed is already assembled, proceed with the guided set-up on your Sleep Number remote.

Setup Guidefor use with an iOS Device

©2014 Select Comfort 7/14120391

Before assembling your new SLEEP NUMBER® bed, set up your new SleepIQ™ system. It will take approximately 10-20 minutes for you to set up your SleepIQ™ system. If you have any questions, please call us at 888-484-9263.

What you’ll need:

• A computer with USB port

• An active SleepIQ™ account

• A compatible browser such as Google Chrome 4, Safari,® Internet Explorer 9, Firefox® 7 or later

• Your home Wi-Fi network name and password (case-sensitive)

• Locate the box labeled “Firmness Control™ system with SleepIQ™ technology” and identify each of the following components: SleepIQ™ Firmness Control™ system, power cord, SleepIQ™ USB flash drive, remote, batteries. Set the remote and batteries aside for now. The remote will be activated during mattress assembly.

Transferring your home Wi-Fi network information to the Firmness Control™ system

1. Log in to your SleepIQ™ account with the SleepIQ™ account information you previously set up at sleepiq.sleepnumber.com.

2. Click on the Menu option in the upper right corner and select General.

3. Insert the SleepIQ™ USB flash drive into your computer.

4. Select Add to enter your home Wi-Fi network name and password, then select Save.

5. Click on the USB icon to save the “bam-init” file to the USB flash drive. (DO NOT rename the file.)

6. Save this file to your computer’s USB drive. Click to Save. Safely remove the USB flash drive from your computer.

7. Ensure that the Firmness Control™ system is NOT plugged into a power source.

8. Open the door on the back of the Firmness Control™ system and insert the USB flash drive into the USB port.

9. Plug the Firmness Control™ system into a working outlet or surge protector.

10. The five LED lights above the door on the back of the Firmness Control™ system will blink and flash during the connection process. This may take up to 10 minutes.* Five solid LED lights indicate you are connected to your home Wi-Fi network. NOTE: If the second light from the left continues to blink, this is normal and you may proceed.

*After 10 minutes, if any lights (other than the second light from the left) remain unlit or continue to blink, visit sleepnumber.com/chat to chat with

one of our sleep professionals, review the FAQs at sleepnumber.com/customer-service/sleepiq-faq or call us at 888-484-9263.

11. Press on the back of the Firmness Control™ system near the USB flash drive as you carefully remove the USB flash drive. Close the small door on the Firmness Control™ system.

12. Use your SLEEP NUMBER® bed assembly guide and SLEEP NUMBER® remote to complete assembly of your bed. NOTE: If your Sleep Number bed is already assembled, proceed with the guided set-up on your Sleep Number remote.

Setup Guidefor use with a personal computer