Embed Size (px)
Citation preview
3M Automotive Aftermarket Division 3M™ PPS™ Paint Preparation System
Ŕ Enhance quality with optimum material transfer
Ŕ Optimise efficiency with less material
Ŕ Reduced solvent usage
Ŕ Easy to mix, spray and clean‑up
Ŕ Maximise productivity with a faster and easier system
3M™ PPS™ Paint Preparation SystemEnhancing paint room productivity.
Please recycle. Printed in the UK. © 3M 2016. All rights reserved. 3M and PPS are trademarks of the 3M company.AB090 /J343239
Automotive Aftermarket Division 3M United Kingdom PLC Tel: 0845 603 9714 [email protected] www.3M.co.uk/bodyshop
Automotive Aftermarket Division 3M Ireland Tel: (00) 353 1 216 0301 Fax: (00) 353 1 280 3509
For more information visit: www.3M.co.uk/bodyshop
Easy to mix, spray and cleanup – work smarter, not harder.
The key benefits of the 3M™ PPS™ Paint Preparation System include:
Ŕ Only one PPS™ cup for mixing and spraying
Ŕ Enables painters to mix less paint
Ŕ Used for all painting applications such as Primer, Base Coat and Top Coat
Ŕ Up to 70% saving of cleaning solvent
Ŕ Closed system – no outside contamination
Ŕ Faster system – from mixing to disposal
Ŕ Less operator exposure to solvents and reduction in VOCs
Ŕ Spray gun functions at any angle
Ŕ Available in 4 sizes: 180, 400, 650 & 850ml
Innovation. Efficiency. Productivity. These are the values you’ve come to expect from 3M.
3M delivers all 3 values with the PPS™ Paint Preparation System. This innovative system increases efficiency by eliminating the need for traditional mixing cups and paint strainers.
Ŕ Unlike traditional spray cups, paint is mixed and sprayed out of the same PPS™ liner with a lid and built-in filter.
Ŕ Specifically designed adapters allow painters to use the PPS™ system with virtually any spray gun.
Ŕ Safe from outside contamination, the PPS™ system offers a cleaner, more efficient solution for all repairs.
3M™ PPS™ Paint Preparation System.
