3G RAN12 Huawei Recommended Parameters_v1.0

8/10/2019 3G RAN12 Huawei Recommended Parameters_v1.0

1/94


2/94

escribes the recommended Huawei 3G Parameters used for Orange Spain Network

Description:

Document information

Sheet contains recommended Huawei Parameters to be used for UMTS Network performance evaluation.

Huawei RAN 12 release

First version of Huawei recommended 3G Parameters documentation issued.


3/94

Notes:

Projects:

Rev. date: Author: Document owner:

September 5, 2011 NSN OSP


4/94

Parameter Group

Parameter ref

ID FeatureUCELLSETUP BandInd Cell Basic Confi

UCELLACCESSSTRICT CellId Cell Basic Confi

UCELLSETUP LAC Cell Basic Confi

UCELLSETUP CellName Cell Basic Confi

UCELLSETUP RAC Cell Basic Confi

UCELLSETUP LoCell Cell Basic Confi

UCELLSETUP CIO Cell Basic Confi

UCELLSETUP MaxTxPower Cell Basic Confi

UCELLSETUP PScrambCode Cell Basic Confi

UCELLSETUP TCell Cell Basic Confi

UCELLSETUP TxDiversityInd Cell Basic Confi

UCELLSETUP UARFCNDownli Cell Basic Confi

UNRNC NRncId Cell Basic Confi

U2GNCELL RncId Cell Basic Confi

UNODEB NodeBId Cell Basic Confi

UCCP NodeBName Cell Basic Confi

UCELLSETUP SAC Cell Basic Confi

UIDLEMODETIMER N300 UE Behaviour inUIDLEMODETIMER T300 UE Behaviour in

UFRC DRXCycleLenCo UE Behaviour in

UFRC DrxCycleLenCo UE Behaviour in

UCONNMODETIMER N312 UE Behaviour in

UCONNMODETIMER T312 UE Behaviour in

UINTRAFREQNCELL SIB11Ind UE Behaviour in

UINTRAFREQNCELL IdleQoffset1sn UE Behaviour in

UINTRAFREQNCELL IdleQoffset2sn UE Behaviour in

U2GNCELL Qoffset1sn UE Behaviour in

U2GNCELL Qrxlevmin UE Behaviour in

UCELLSELRESEL Qrxlevmin UE Behaviour in

UCNDOMAIN ATT UE Behaviour in

UCNDOMAIN T3212 UE Behaviour in

UCELLSELRESEL MaxAllowedUlTUE Behaviour in

UCELLSELRESEL Qqualmin UE Behaviour in

UCELLSELRESEL IdleSintersearc UE Behaviour in


5/94

UCELLSELRESEL IdleSintrasearc UE Behaviour in

UCELLSELRESEL ConnSintersear UE Behaviour in

UCELLSELRESEL ConnSintrasear UE Behaviour in

UCELLSELRESEL IdleQhyst1s UE Behaviour in

UCELLSELRESEL IdleQhyst2s UE Behaviour in

UCELLSELRESEL ConnQhyst1s UE Behaviour in

UCELLSELRESEL ConnQhyst2s UE Behaviour inUCELLSELRESEL SsearchRat UE Behaviour in

UCELLSELRESEL Treselections UE Behaviour in

UCELLHCS CRMaxNum UE Behaviour in

UCELLHCS Qhcs UE Behaviour in

U2GNCELL TempOffset1 UE Behaviour in

UINTRAFREQNCELL TpenaltyHcsRes UE Behaviour in

UCELLHCS SHCSRat UE Behaviour in

UCELLHCS SlimitSearchRat UE Behaviour in

UCELLHCS SsearchHCS UE Behaviour in

UCELLHCS TCRmax UE Behaviour in

UCELLHCS TCrmaxHyst UE Behaviour in

UCELLACCESSSTRICT CellReservedFo UE Behaviour in

UCELLACCESSSTRICT ConnCellBarredUE Behaviour in

UCELLACCESSSTRICT IdleCellBarred UE Behaviour in

UCELLACCESSSTRICT IsAccessClass0BUE Behaviour in






UCELLACCESSSTRICT IsAccessClass6BUE Behaviour inUCELLACCESSSTRICT IsAccessClass7BUE Behaviour in



UCELLACCESSSTRICT IsAccessClass10UE Behaviour in






UFRC FddTpcDlStepSi Power Control

UFRC PwrCtrlAlg Power Control

USSCH SSCHPower Power Control

URACH Mmax Power Control

URACH NB01max Power Control

URACH NB01min Power Control

UPSCH PSCHPower Power Control

UPRACHTFC GainFactorBeta Power Control

UPRACHTFC GainFactorBeta Power Control

UPRACHTFC PowerOffsetPp Power Control


6/94

UPRACHBASIC Constantvalue Power Control

UPRACHBASIC PowerRampSte Power Control

UPRACHBASIC PreambleRetra Power Control

UPCPICH PCPICHPower Power Control

UPCH PCHPower Power Control

UFACH MaxFachPower Power Control

UCHPWROFFSET AICHPowerOffs Power ControlUCHPWROFFSET PICHPowerOffs Power Control

UCELLCAC MaxUlTxPower Power Control




UBCH BCHPower Power Control

UAICH AICHTxTiming Power Control

UPICH PICHMode Power Control

UPRACHBASIC RACHSubChNo Power Control

UPRACHBASIC PreambleSignatPower Control

UPRACHSLOTFORMAT SlotFormatNumPower Control

UCELLCAC BackgroundNoi Power Control

UCELLHSDPA HspaPower Power Control

UNRNC SHOTRIG IntraFreq Hand

UINTRAFREQNCELL CellsForbidden IntraFreq Hand

UINTRAFREQNCELL CellsForbidden IntraFreq Hand

UINTRAFREQNCELL NCellId IntraFreq Hand

UINTRAFREQNCELL CIOOffset IntraFreq Hand

UINTRAFREQHO TrigTime1A IntraFreq Hand

UINTRAFREQHO TrigTime1B IntraFreq Hand

UINTRAFREQHO HystFor1C IntraFreq HandUINTRAFREQHO IntraRelThdFor IntraFreq Hand

UINTRAFREQHO IntraRelThdFor IntraFreq Hand





UINTRAFREQHO MaxCellInActiv IntraFreq Hand

UINTRAFREQHO ReportIntervalf IntraFreq Hand

UINTRAFREQHO ReportIntervalf IntraFreq Hand

UINTRAFREQHO TrigTime1C IntraFreq Hand

UINTRAFREQHO Weight IntraFreq Hand

UHOCOMM IFAntiPingpang InterFreq Hand

UINTERFREQNCELL NCellId InterFreq Hand

UINTERFREQNCELL NPrioFlag InterFreq Hand

UINTERFREQNCELL NPrio InterFreq Hand

UINTRAFREQNCELL CIOOffset InterFreq Hand

UINTERFREQHOCOV InterFreqMeas InterFreq Hand

UINTERFREQHOCOV InterFreqCSThd InterFreq Hand



7/94



UINTERFREQHOCOV InterFreqHThd2InterFreq Hand




UINTERFREQHOCOV InterFreqR99Ps InterFreq HandUINTERFREQHOCOV InterFreqR99Ps InterFreq Hand

UINTERFREQHOCOV InterFreqR99Ps InterFreq Hand

UINTERFREQHOCOV InterFreqR99Ps InterFreq Hand

UINTERFREQHOCOV PrdReportInter InterFreq Hand

UINTERFREQHOCOV TimeToTrig2D InterFreq Hand

UINTERFREQHOCOV TimeToTrig2F InterFreq Hand

UINTERRATHOCOV InterRATCSThd InterRat Hando




UINTERRATHOCOV InterRATHThd2 InterRat Hando




UINTERRATHOCOV InterRATR99Ps InterRat Hando




UINTERRATHOCOV InterRATPeriod InterRat Hando

UINTERRATHOCOV InterRATPingPoInterRat Hando

UINTERRATHOCOV TrigTime2D InterRat HandoUINTERRATHOCOV TrigTime2F InterRat Hando

UINTERRATHOCOV InterRATMeasT InterRat Hando

UINTERRATHOCOV InterRATMeasT InterRat Hando

UINTRAFREQNCELL CIOOffset InterRat Hando

UEXT2GCELL BCC InterRat Hando

UEXT2GCELL BcchArfcn InterRat Hando

UEXT2GCELL NCC InterRat Hando

UCELLSETUP LAC InterRat Hando

USTATETIMER SysHoPsResum InterRat Hando

U2GNCELL Nprioflag InterRat Hando

U2GNCELL Nprio InterRat Hando

UCELLHCS HCSPrio HCS Handover

UCELLHCS UseOfHcs HCS Handover

UCELLHSUPA MaxTargetUlLo HSPA

UFRCCHLTYPEPARA CSVoiceChlTyp HSPA

UCELLALGOSWITCH HspaPlusSwitch HSPA

UCELLHSDPA AllocCodeMod HSPA

UCELLHSDPA HsPdschMaxCo HSPA

UCELLHSDPA HsPdschMinCo HSPA


8/94

UCELLHSDPA HsScchCodeNu HSPA

UUESTATETRANS CellReSelectTimURA Update &

UUESTATETRANS CellReSelectCo URA Update &

UCONNMODETIMER N302 URA Update &

UCONNMODETIMER T302 URA Update &


UCONNMODETIMER T307 URA Update &UCONNMODETIMER T316 URA Update &










UURA URAId URA Update &


UDCCC DlDcccRateThd Rate Control

UDCCC UlDcccRateThd Rate Control

UUESTATETRANS BeF2DTvmThd Rate Control

UUESTATETRANS BeF2DTvmTime Rate Control

UPSINACTTIMER PsInactTmrForI Rate Control

UPSINACTTIMER PsInactTmrFor Rate Control

UPSINACTTIMER PsInactTmrFor Rate Control

UPSINACTTIMER PsInactTmrForS Rate Control

UFRC UlBeTraffInitBit Rate ControlUFRC DlBeTraffInitBit Rate Control

UUESTATETRANS F2PTvmTimeTo Rate Control

UDCCC DlMidRateThd Rate Control

UDCCC DlFullCvrRate Rate Control

UUSERGBR DlGBR Rate Control

UDCCC UlMidRateThd Rate Control

UDCCC UlFullCvrRate Rate Control

UUSERGBR UlGBR Rate Control

USTATETIMER RelocCmdTmr SRNS Relocatio

USTATETIMER RelocDataFwdT SRNS Relocatio

USTATETIMER RelocIuRelCmd SRNS Relocatio

UEXT3GCELL CellCapContain SRNS Relocatio

UNRNC RncProtclVer SRNS Relocatio

UCNOPERATOR MCC Miscellanea

UCNOPERATOR MNC Miscellanea

UCNNODE CNID Miscellanea

UCNDOMAIN NMO Miscellanea

UCELLRLPWR CNDOMAINID Miscellanea

UCNNODE CNProtclVer Miscellanea


9/94

OPC SPC Miscellanea

UIUTIMERANDNUM RAFCTMR Miscellanea

UIUTIMERANDNUM RATCTMR Miscellanea

UIUTIMERANDNUM IGORTMR Miscellanea

UIUTIMERANDNUM INTRTMR Miscellanea

UPCH ToAWS Miscellanea

UPCH ToAWE MiscellaneaULDM TenMsecForUlBMiscellanea

ULDM TenMsecForDlBMiscellanea

UNRNC TnlBearerType Miscellanea

UCORRMALGOSWITCH CfgSwitch Switches

UCORRMALGOSWITCH CmcfSwitch Switches

UCORRMALGOSWITCH CmpSwitch Switches

UCORRMALGOSWITCH CsSwitch Switches

UCORRMALGOSWITCH DraSwitch Switches

UCORRMALGOSWITCH DrSwitch Switches

UCORRMALGOSWITCH HoSwitch Switches

UCORRMALGOSWITCH MapSwitch Switches

UCORRMALGOSWITCH PcSwitch Switches

UCORRMALGOSWITCH PsSwitch Switches

UCORRMALGOSWITCH ReservedSwitchSwitches

UCORRMALGOSWITCH ReservedSwitchSwitches

UCORRMALGOSWITCH ReservedU32PaSwitches

UCORRMALGOSWITCH ReservedU32PaSwitches

UCORRMALGOSWITCH ReservedU8Par Switches

UCORRMALGOSWITCH ReservedU8Par Switches

UCORRMALGOSWITCH SrnsrSwitch Switches


10/94

3G Huawei Parameters

Parameter DescriptionIndicating the selected frequency Band in the cell setup process.

ID of a cell.

Identifying a location area code for a PLMN of GSM-MAP type. It is defined by the opera

Identifying a cell name.

Identifying a routing area in a location area for a PLMN of GSM-MAP type. It is defined b

Uniquely identifying a local cell.

This parameter works with the offset of neighboring cell-oriented Cell Individual Offset (

Sum of the maximum transmit power of all DL channels in a cell.

Sequence No. of a DL primary scrambling code in a cell.

Difference between the System Frame Number (SFN) and NodeB Frame Number (BFN) o

This parameter indicates whether transmission diversity configuration of the cell's down

Depending on the value of [Band indication], as shown below:Band1General frequencies

Neighboring RNC ID.

Uniquely identifies an RNC.

NodeB ID.

Name of the NodeB.

MCC,MNC,LAC and SAC together compose the Service Area ID (SAI). SAI = MCC || MNC |

Maximum number of retransmissions of the RRC CONNECTION REQUEST message.T300 is started when UE sends the RRC CONNECTION REQUEST message. It is stopped w

CN domain specific Discontinuous Reception (DRX) cycle length coefficient broadcast on

This parameter specifies the UTRAN-specific Discontinuous Reception (DRX) cycle length

Maximum number of successive "in sync" indications received from L1.

T312 is started when UE starts to establish a DCH, and stopped when UE detects consec

Flag of whether to include this neighboring relationship in the System Information Block

Offset of cell CPICH RSCP measurement value in cell selection or reselection when the U

Offset of cell CPICH Ec/No measurement value in cell selection or reselection when the

Offset between the neighboring GSM cell and WCDMA cell.This specifies the offset of th

Minimum RX level of the GSM cell.Before the UE camps on the cell, take the measureme

The minimum required RX threshold corresponding to CPICH RSCP. The UE can camp o

Indicating whether attach/detach is allowed. NOT_ALLOWED indicates that MS(Mobile S

Value of the periodical location update timer. The periodical update procedure is imple

The maximum allowed uplink transmit power of a UE in the cell, which is related to the

The minimum required quality threshold corresponding to CPICH Ec/No. The UE can cam

Threshold for inter-frequency cell reselection in idle mode. When the quality (CPICH Ec/


11/94

Threshold for intra-frequency cell reselection in idle mode. When the quality (CPICH Ec/

Threshold for inter-frequency cell reselection in connected mode. When the quality (CPI

Threshold for intra-frequency cell reselection in connected mode. When the quality (CPI

The hysteresis value of the serving FDD cells in idle mode in case the quality measureme

The hysteresis value of the serving FDD cells in idle mode in case the quality measureme

The hysteresis value of the serving FDD cells in connected mode in case the quality meas

The hysteresis value of the serving FDD cells in connected mode in case the quality measThreshold for inter-RAT cell reselection. When the quality (CPICH Ec/No measured by UE

If the signal quality (CPICH Ec/No measured by the UE) of a neighboring cell is better tha

Maximum number of cell reselection. This parameter, along with the [Time for evaluatin

Quality threshold of HCS cell reselection. It can be used to calculate the quality level of t

Offset of HCS cell CPICH RSCP measurement value in cell selection or reselection.The lar

HCS cell reselection penalty timer.The larger the value of the parameter, the longer the H

Inter-system HCS cell reselection start threshold. When Srxlev of the serving cell is less t

The UE does not start the inter-RAT measurement if it detects that the quality of the ser

Intra-system HCS cell reselection start threshold. When Srxlev of the serving cell is less t

Maximum duration of cell reselection. This parameter, along with the [Max number of c

Time before reverting to low-mobility measurement.

Indicating whether the cell is reserved for operators. If the status of cell is NOT_BARRED,

Indicating whether the UE in connected mode is allowed to access the cell. When the cel

Indicating whether the UE in idle mode is allowed to access the cell. When the cell statu

Indicating whether the UE allocated with Access Class 0 can be allowed to initiate access






Indicating whether the UE allocated with Access Class 6 can be allowed to initiate accessIndicating whether the UE allocated with Access Class 7 can be allowed to initiate access



Indicating whether the UE allocated with Access Class 10 can be allowed to initiate acces






This parameter specifies the step size of the closed-loop power control performed on DL

This parameter is used to inform the UE of the method for translating the received Tran

Offset of the SSCH transmit power from the PCPICH transmit power in a cell.

Maximum number of random access preamble loops.

Upper limit of random access back-off delay.

Lower limit of random access back-off delay.

Offset of the PSCH transmit power from the PCPICH transmit power in a cell.

The power occupancy factor of the data part.

The power occupancy factor of the control part.

The power offset between the last access preamble and the message control part. The p


12/94

It is used to calculate the transmit power of the first preamble in the random access pro

The power increase step of the random access preambles transmitted before the UE rec

The maximum number of preambles transmitted in a preamble ramping cycle.

TX power of the PCPICH in a cell. This parameter should be set based on the actual syste

Offset of the PCH transmit power from the PCPICH transmit power in a cell.

The offset between the FACH transmit power and PCPICH transmit power in a cell.

Difference between the transmit power of AICH and that of PCPICH.Difference between the transmit power of PICH and that of PCPICH.

The maximum UL transmit power for background service in a specific cell. It is based on

Maximum UL transmit power for conversational service in a specific cell. It is based on t

The maximum UL transmit power for the interactive service in a specific cell. It is based

Maximum UL transmit power for the streaming service in a specific cell. It is based on th

Offset of the BCH transmit power from the PCPICH transmit power in a cell.

Transmission timing information of an AICH. "0" indicates that there are 7680 chips offs

Indicating the number of PIs contained in each frame of the PICH.

Sequence No. of an available sub channel. A maximum of 12 sub channels (from sub cha

Sequence No. of an available preamble signature. A maximum of 16 signatures (from sig

Number of available PRACH timeslot formats.

If [Auto-Adaptive Background Noise Update Switch] is set to OFF, it is used to set backgr

This parameter specifies the difference between the total HSPA power and the maximu

Indicates whether to trigger soft handover cross the Iur interface between the RNC and t

Flag of whether adding a cell into the active set will affect the relative threshold of the e

Flag of whether adding a cell into the active set will affect the relative threshold of the e

Uniquely identifying a neighboring cell.

Neighboring cell oriented Cell Individual Offset (CIO).This parameter defines the neighbo

This parameter specifies the time delay to trigger event 1A. The value of this parameter

This parameter specifies the time delay to trigger event 1B. The value of this parameter

This parameter specifies the hysteresis value for event 1C. The value of this parameter cThis parameter specifies the CS non-VP service relative threshold of event 1A. The highe

This parameter specifies the VP service relative threshold of event 1A. The higher the thr

This parameter specifies the PS service relative threshold of event 1A. The higher the thr

This parameter specifies the CS non-VP service relative threshold of event 1B. The lower

This parameter specifies the PS service relative threshold of event 1B. The lower the thre

This parameter specifies the PS service relative threshold of event 1B. The lower the thre

This parameter specifies the maximum number of cells in the active set. This parameter

This parameter specifies the reporting period of event 1A. That is, event 1A is reported a

This parameter specifies the number of reporting times of event 1C for periodical reporti

This parameter specifies the time delay to trigger event 1C. The value of this parameter

This parameter is used to determine the relative threshold of the soft handover based o

After the coverage based handover succeeds, to avoid the handover of the UE to anothe

Uniquely identifying a neighboring cell.

TRUE indicates that the neighboring cell priority is valid in the algorithm of neighboring c

Priority of neighboring cells.The priority that corresponds to the neighboring cell is valid

Neighboring cell oriented Cell Individual Offset (CIO).Content: This parameter defines th

Timer length for inter-frequency measurement.After inter-frequency measurement start

Threshold to trigger inter-frequency measurement with measurement quantity of Ec/No

Threshold to trigger inter-frequency measurement with measurement quantity of RSCP f


13/94

Threshold to stop inter-frequency measurement with measurement quantity of Ec/No fo

Threshold to stop inter-frequency measurement with measurement quantity of RSCP for

Threshold to trigger inter-frequency measurement with measurement quantity of Ec/No

Threshold to trigger inter-frequency measurement with measurement quantity of RSCP f



Threshold to trigger inter-frequency measurement with measurement quantity of Ec/NoThreshold to trigger inter-frequency measurement with measurement quantity of RSCP f



Inter-frequency measurement reporting interval.In periodical report mode, the interval b

Time delay to trigger event 2D.The value of this parameter correlates with slow fading. T

Time delay to trigger the event 2F.The value of this parameter correlates with slow fadin

Threshold to trigger inter-RAT measurement with measurement quantity of Ec/No for CS

Threshold to trigger inter-RAT measurement with measurement quantity of RSCP for CS

Threshold to stop inter-RAT measurement with measurement quantity of Ec/No for CS d

Threshold to stop inter-RAT measurement with measurement quantity of RSCP for CS do

Threshold to trigger inter-RAT measurement with measurement quantity of Ec/No for HS

Threshold to trigger inter-RAT measurement with measurement quantity of RSCP for HS

Threshold to stop inter-RAT measurement with measurement quantity of Ec/No for HSD

Threshold to stop inter-RAT measurement with measurement quantity of RSCP for HSDP

Threshold to trigger inter-RAT measurement with measurement quantity of Ec/No for PS

Threshold to trigger inter-RAT measurement with measurement quantity of RSCP for PS

Threshold to stop inter-RAT measurement with measurement quantity of Ec/No for PS d

Threshold to stop inter-RAT measurement with measurement quantity of RSCP for PS do

Interval that the UE reports inter-RAT measurement results to the RNC.In periodical repo

Inter-RAT ping-pong timer. When a UE in the CS domain is handed over from a 2G netwo

Time delay to trigger the event 2D.The value of this parameter correlates with slow fadinTime delay to trigger the event 2F.The value of this parameter correlates with slow fadin

Timer length for inter-RAT measurement.After inter-RAT measurement starts, if no inter-

Timer length for inter-RAT measurement.After inter-RAT measurement starts, if no inter-

Cell individual offset for the GSM cell, which is set according to the topographic feature.Th

Uniquely identifying a neighboring base station with the same carrier

Identifying BCCH frequency number of the inter-RAT cell.BCCH: Broadcast Control Chann

Uniquely identifying the different network in the neighboring area.

Identifying a location area code for a PLMN of GSM-MAP type. It is defined by the opera

A timer to RNC wait for PS RESUME after successful CS InterRAT handover.

TRUE indicates that the neighboring cell priority is valid in the algorithm of neighb

Priority of neighboring cells.The priority that corresponds to the neighboring cell is valid

HCS priority of the cell belongs to. The parameter depends on HCS rules.

Indicating whether HCS is used.

The parameter specifies the target value of the uplink load, which is decreased through

This parameter specifies the channel type of CS voice services.- DCH: Both uplink and do

If 64QAM,MIMO,E_FACH,DTX_DRX,HS_SCCH_LESS_OPERATION and L2ENHANCED are s

If Manual is chosen, allocating [Code Number for HS-PDSCH] the equal of configured HS-

The parameter determines the maximum number of HS-PDSCH codes (SF=16). This para

The parameter specifies the minimum number of the HS-PDSCH codes (SF=16). This para


14/94

This parameter decides the maximum number of subscribers that the NodeB can schedu

Length of the cell reselection frequency timer. This parameter is used together with Cell

If the times the UE in the CELL_PCH state performs cell reselection is greater than or equ

Maximum number of retransmissions of CELL UPDATE/URA UPDATE.Protocol default val

T302 is started after the UE transmits the CELL UPDATE/URA UPDATE message and stop

T305 is started after the UE receives CELL UPDATE CONFIRM/URA UPDATE CONFIRM in

T307 is started after T305 has expired and the UE detects "out of service area". It is stopT316 is started after the UE detects "out of service area" in URA_PCH or CELL_PCH state.

Maximum number of successive "out of sync" indications received from L1. Protocol def

Maximum number of successive "in sync" indications received from L1 when T313 is acti

T313 is started after the UE detects consecutive N313 "out of sync" indications from L1.

T314 is started when the criteria for radio link failure are fulfilled and only radio bearers (

T315 is started when the criteria for radio link failure are fulfilled, and only the radio bea

T304 is started after the UE sends the UE CAPABILITY INFORMATION message and stopp

Maximum number of retransmissions of UE CAPABILITY INFORMATION. Protocol default

T308 is started after the UE transmits RRC CONNECTION RELEASE COMPLETE. This mess

Maximum number of retransmission of RRC CONNECTION RELEASE COMPLETE.

Identity of the UTRAN registration area. The URA is only used by the UTRAN and the CN

T309 is started after the UE is reselected to a cell belonging to another radio access syst

For a BE service that has a low maximum rate, the DCCC algorithm is not obviously effec

For a BE service that has a low maximum rate, the DCCC algorithm is not obviously effec

This parameter specifies the threshold of the traffic volume of 4A event for triggering th

This parameter specifies the occurrence time of 4A event for triggering the transition of

When detecting that the Ps' Interactive User had no data to transfer for a long time whic

When detecting that the Ps' Background User had no data to transfer for a long time whi

When detecting that the Ps' Conversational User had no data to transfer for a long time

When detecting that the Ps' Streaming User had no data to transfer for a long time whic

UL BE traffic Initial bit rate. When DCCC function is enabled, the uplink initial bit rate willDL BE traffic Initial bit rate. When DCCC function is enabled, the downlink initial bit rate

When the traffic volume is below the 4B threshold and remains so for the period specifi

Threshold of the DL intermediate rate when the 3-step mode is used for DL rate adjustm

Maximum DL rate during network planning when coverage of the entire cell is ensured.

This parameter specifies the downlink guaranteed bit rate (GBR) of the BE service. GBR i

Threshold of the UL intermediate rate when the 3-step mode is used for UL rate adjustm

Maximum UL rate when coverage of the entire cell is ensured under certain load. For a B

This parameter specifies the uplink guaranteed bit rate (GBR) of the BE service. GBR is th

A timer to RNC wait for the relocation command message in relocation procedure.

A timer used for data forwarding in relocation procedure.

A timer to RNC wait for the Iu release command message in relocation procedure.

1)DELAY_ACTIVATION_SUPPORT (delay activation support indicator):when the indicator i

Protocol version supported by the neighboring RNC.

Mobile country code of the RNC.

Mobile network code of the RNC.

Identifies a CN node

This parameter should be set according to the actual network situation . If there is the G

Identifies the type of a CN.

Protocol version supported by the CN.


15/94


16/94

OSP Recommended

Value GUI Range Actual Range Default

Recommended

valueBand1 Band1, BandBand1, Band2, Band3, Band4, None None

N/A 0~65535 0~65535 None None

N/A 1~65533,65 {1~65533}, {65535} None None

N/A None 1~31 characters None None

N/A 0~255 0~255 None None

N/A 0~268435450~268435455 None None

0 -20~20 -10~10, step: 0.5 0 0

430 0~500 0~50, step: 0.1 430 430


CHIP0 CHIP0, CHIP CHIP0, CHIP256, CHIP512, CHI None None

FALSE TRUE, FALSE TRUE, FALSE None None

10663 0~16383 0~16383 None None

N/A 0~4095 0~4095 None None

N/A 0~4095 0~4095 None None

N/A 0~65535 0~65535 None None

N/A None 1~64 characters None None

N/A 0~65535 0~65535 None None

3 0~7 0~7 None 3D2000 D100, D200, D100, D200, D400, D600, D80 None D2000

6 6~9 6~9 6 6

6 3~9 3~9 6 6

D1 D1, D2, D4, D1, D2, D4, D10, D20, D50, D1 None D1

6 1~15 1~15 None 6

TRUE FALSE(Do noFALSE, TRUE TRUE TRUE

0 -50~50 -50~50 0 0

0 -50~50 -50~50 0 0

0 -50~50 -50~50 0 0

-50 -58~-13 -115~-25, step:2 Actual value -50 -50

-55 -58~-13 -115~-25, step:2 -58 -58

0 NOT_ALLO NOT_ALLOWED, ALLOWED ALLOWE ALLOWED

10 0~255 0~1530 step:6 10 10

24 -50~33 -50~33 24 24

-18 -24~0 -24~0 -18 -18

5 -16~10,127 {-32~20}, {127}, step:2 4 4


17/94

7 -16~10,127 {-32~20}, {127}, step:2 5 5

4 -16~10,127 {-32~20}, {127}, step:2 4 4

5 -16~10,127 {-32~20}, {127}, step:2 5 5

2 0~20 0~40, step:2 2 2

1 0~20,255 {0~40}, {255}, step:2 1 1

2 0~20 0~40, step:2 2 2

1 0~20,255 {0~40}, {255}, step:2 1 12 -16~10,127 {-32~20}, {127}, step:2 2 2

1 0~31 0~31 1 1

HCSnotInuse 1~16 1~16 8 8

HCSnotInuse 0~99 0~99 20 20

D3 D3~0 D6~1 3, 6, 9, 12, 15, 18, 21, INFINIT D3 D3

D0 D0, D10, D2 0, 10, 20, 30, 40, 50, 60 D0 D0

HCSnotInuse -53~45 -105~91, step:2 0 0



HCSnotInuse NOT_USED, NOT_USED, 30, 60, 120, 180, D60 D60

HCSnotInuse NOT_USED, NOT_USED, 10, 20, 30, 40, 50, D20 D20

NOT_RESERVED RESERVED, RESERVED, NOT_RESERVED NOT_RE NOT_RESERVED

NOT_BARRED BARRED, N BARRED, NOT_BARRED None None

NOT_BARRED BARRED, N BARRED, NOT_BARRED None None

NOT_BARRED BARRED, N BARRED, NOT_BARRED NOT_BA NOT_BARRED






NOT_BARRED BARRED, N BARRED, NOT_BARRED NOT_BA NOT_BARREDNOT_BARRED BARRED, N BARRED, NOT_BARRED NOT_BA NOT_BARRED









STEPSIZE_1DB STEPSIZE_0. 0.5, 1, 1.5, 2 STEPSIZESTEPSIZE_1DB

ALGORITHM1 ALGORITHM ALGORITHM1, ALGORITHM2 ALGORITALGORITHM1

-50 -350~150 -35~15, step: 0.1 -50 -50

8 1~32 1~32 8 8

0 0~50 0~50 0 0

0 0~50 0~50 0 0

-50 -350~150 -35~15, step: 0.1 -50 -50

15 0~15 0~15 15 15

10 1~15 1~15 None None

-2 -5~10 -5~10 None In signaling trans


18/94

-20 -35~-10 -35~-10 -20 -20

2 1~8 1~8 2 2

20 1~64 1~64 20 20

330 -100~500 -10~50, step: 0.1 330 330

-20 -350~150 -35~15, step: 0.1 -20 -20

10 -350~150 -35~15, step: 0.1 10 10

-6 -22~5 -22~5 -6 -6-7 -10~5 -10~5 -7 -7

24 -50~33 -50~33 24 24

24 -50~33 -50~33 24 24

24 -50~33 -50~33 24 24

24 -50~33 -50~33 24 24

-20 -350~150 -35~15, step: 0.1 -20 -20

1 0~1 0~1 1 1

V36 V18, V36, V 18, 36, 72, 144 V36 V36

SUBCHANEL0-1&SUBCHA SUBCHANEL SUBCHANEL0, SUBCHANEL1, S None SELECT ALL

SIGNATURE0-1&SIGNATUSIGNATURE SIGNATURE0, SIGNATURE1, SI None SIGNATURE0, SIG

D4 D1, D2, D3, D1, D2, D3, D4 None None

61 0~621 -112~-50, step:0.1 61 61

0 -500~0 -50~0, step:0.1 0 0

SUPPORT_CS_AND_PS CS_SHO_SWCS_SHO_SWITCH, HSPA_SHO None CS_SHO_SWITCH:

AFFECT AFFECT, NO AFFECT, NOT_AFFECT AFFECT AFFECT

AFFECT AFFECT, NO AFFECT, NOT_AFFECT AFFECT AFFECT

N/A 0~65535 0~65535 None None

0 -20~20 -10~10, step:0.5 0 0

D200 D0, D10, D2 0, 10, 20, 40, 60, 80, 100, 120, D320 D320

D1280 D0, D10, D2 0, 10, 20, 40, 60, 80, 100, 120, D640 D640

8 0~15 0~7.5, step:0.5 8 86 0~29 0~14.5, step:0.5 6 6

6 0~29 0~14.5, step:0.5 6 6

6 0~29 0~14.5, step:0.5 6 6

12 0~29 0~14.5, step:0.5 12 12

12 0~29 0~14.5, step:0.5 12 12

12 0~29 0~14.5, step:0.5 12 12

3 1~6 1~6 3 3

D4000 NON_PERIO NON_PERIODIC_REPORT, 250, D4000 D4000


D640 D0, D10, D2 0, 10, 20, 40, 60, 80, 100, 120, D640 D640

0 0~20 0~2, step:0.1 0 0

30 0~120 0~120 None 30

N/A 0~65535 0~65535 None None

FALSE 0~63 0~63 None None

N/A No priority in use 0~63 0~63 None None

0 -20~20 -10~10, step:0.5 0 0

60 0~512 0~512 60 60

-12 -24~0 -24~0 -14 -14

-95 -115~-25 -115~-25 -95 -95


19/94

-10 -24~0 -24~0 -12 -12

-92 -115~-25 -115~-25 -92 -92

-15 -24~0 -24~0 -14 -14

-95 -115~-25 -115~-25 -95 -95

-13 -24~0 -24~0 -12 -12

-92 -115~-25 -115~-25 -92 -92

-15 -24~0 -24~0 -14 -14-95 -115~-25 -115~-25 -95 -95

-13 -24~0 -24~0 -12 -12

-92 -115~-25 -115~-25 -92 -92


D320 D0, D10, D2 0, 10, 20, 40, 60, 80, 100, 120, D320 D320

D1280 D0, D10, D2 0, 10, 20, 40, 60, 80, 100, 120, D1280 D1280

-12 -24~0 -24~0 -14 -14

-105 -115~-25 -115~-25 -100 -100

-10 -24~0 -24~0 -12 -12

-102 -115~-25 -115~-25 -97 -97

-15 -24~0 -24~0 -15 -15

-110 -115~-25 -115~-25 -110 -110

-13 -24~0 -24~0 -13 -13

-107 -115~-25 -115~-25 -107 -107

-15 -24~0 -24~0 -15 -15

-110 -115~-25 -115~-25 -110 -110

-13 -24~0 -24~0 -13 -13

-107 -115~-25 -115~-25 -107 -107


0 0~65535 0~65535 0 0

D320 D0, D10, D2 0, 10, 20, 40, 60, 80, 100, 120, D320 D320D1280 D0, D10, D2 0, 10, 20, 40, 60, 80, 100, 120, D1280 D1280

60 0~512 0~512 60 60

60 0~512 0~512 3 3

0 -50~50 -50~50 0 0


N/A 0~1023 0~1023 None None


N/A 1~65533,65 {1~65533}, {65535} None None

10 1~255 1~255 None 10

FALSE 0~31 0~31 None None

N/A No priority in use 0~31 0~31 None None

HCS Not in use 0~7 0~7 0 0

NOT_USED USED, NOT_ USED, NOT_USED NOT_US NOT_USED

75 0~100 0~1, step:0.01 75 75

DCH DCH(UL_DC DCH, HSPA DCH DCH

64QAM-0&MIMO-0&E_F 64QAM, MI 64QAM, MIMO, E_FACH, DTX None None

Automatic Manual(Ma Manual, Automatic Automat Automatic

5 1~15 1~15 5 5

1 1~15 1~15 1 1


20/94

4 1~15 1~15 4 4

180 1~65535 1~65535 None 180

9 1~65535 1~65535 None 9

5 0~7 0~7 None 3

D1000 D100, D200, D100, D200, D400, D600, D80 None D2000

D30 INFINITY, D5 INFINITY, D5, D10, D30, D60, None D30

D30 D5, D10, D1 D5, D10, D15, D20, D30, D40, None NoneD30 D0, D10, D2 D0, D10, D20, D30, D40, D50, INone D30



3 0~15 0~15 None 3

D6 D0, D2, D4, D0, D2, D4, D6, D8, D12, D16, None D0

D10 D0, D10, D3 D0, D10, D30, D60, D180, D60 None D0

D2000 D100, D200, D100, D200, D400, D1000, D2 None D2000

3 0~7 0~7 None 3

D40 D40, D80, D D40, D80, D160, D320 None D40

1 1~8 1~8 None 1

1 0~65535 0~65535 None None

5 1~8 1~8 None 5

D64 D8, D16, D3 8, 16, 32, 64, 128, 144, 256, 3 None D64

D64 D8, D16, D3 8, 16, 32, 64, 128, 144, 256, 3 None D64

D1024 D16, D32, D 16, 32, 64, 128, 256, 512, 102 None D1024

D0 D0, D10, D2 0, 10, 20, 40, 60, 80, 100, 120, None D0

15 0~14400 0~14400 None 20

15 0~14400 0~14400 None 20

15 0~14400 0~14400 None 20

15 0~14400 0~14400 None 20

D64 D8, D16, D3 8, 16, 32, 64, 128, 144, 256, 3 D64 D64D64 D8, D16, D3 8, 16, 32, 64, 128, 144, 256, 3 D64 D64

D5000 D0, D10, D2 0, 10, 20, 40, 60, 80, 100, 120, None D5000

D128 D16, D32, D 16, 32, 64, 128, 144, 256, 384 None D128

D64 D8, D16, D3 8, 16, 32, 64, 128, 144, 256, 3 D64 D64

D0 D0, D8, D16, 0, 8, 16, 32, 64, 128, 144, 256, D64 D64

D128 D16, D32, D 16, 32, 64, 128, 144, 256, 384 None D128

D64 D8, D16, D3 8, 16, 32, 64, 128, 144, 256, 3 D64 D64

D0 D0, D8, D16, 0, 8, 16, 32, 64, 128, 144, 256, D64 D64

10000 1~20000 1~20000 None 10000

20000 1~20000 1~20000 None 20000

45000 1~60000 1~60000 None 45000

DELAY_ACTIVATION_SUP DELAY_ACTI DELAY_ACTIVATION_SUPPOR None None

NO R99, R4, R5, R99, R4, R5, R6, R7 None None

214 None 000~999 None None

03 None 00~99, 000~999 None None

N/A 0~4095 0~4095 None None

MODE2 MODE1, M MODE1, MODE2 MODE2 MODE2

CS_DOMAINen setCS_DO CS_DOMAINCS_DOMAIN, PS_DOMAIN None None

R6 R99, R4, R5, R99, R4, R5, R6, R7 None None


21/94

4031 1~167772151~16383(BIT14), 1~65535(BIT None None

30000 10000~240010000~240000 None 30000

120000 0~240000 0~240000 None 120000

20000 5000~300005000~30000 None 20000

60000 15000~120015000~120000 None 60000

35 0~1279 0~1279 35 35

10 0~2559 0~2559 10 10100 1~6000 10~60000, step:10 None 100

100 1~6000 10~60000, step:10 None 100

OFF ATM_TRAN ATM_TRANS, IP_TRANS None None

CFG_DL_BLIND_DETECTI CFG_DL_BLI CFG_DL_BLIND_DETECTION_S None CFG_DL_BLIND_

CMCF_DL_HLS_SWITCH-1CMCF_DL_H CMCF_DL_HLS_SWITCH, CMC None CMCF_DL_HLS_S

CMP_IU_IMS_PROC_AS_ CMP_IU_IM CMP_IU_IMS_PROC_AS_NOR None CMP_IU_IMS_PR

CS_AMRC_SWITCH-0&CS CS_AMRC_S CS_AMRC_SWITCH, CS_HAND None CS_AMRC_SWITC

DRA_AQM_SWITCH-0&D DRA_AQM_ DRA_AQM_SWITCH, DRA_BE_ None DRA_AQM_SWIT

DR_RRC_DRD_SWITCH-1 DR_RRC_DR DR_RRC_DRD_SWITCH, DR_R None DR_RRC_DRD_SW

HO_ALGO_HCS_SPEED_E HO_ALGO_ HO_ALGO_HCS_SPEED_EST_S None HO_ALGO_HCS_S

MAP_HSUPA_TTI_2MS_S MAP_HSUP MAP_HSUPA_TTI_2MS_SWIT None MAP_HSUPA_TTI

PC_DL_INNER_LOOP_PC PC_AMR_M PC_AMR_MODE_INDUCE_BLE None PC_AMR_MODE_

PS_BE_EXTRA_LOW_RAT PS_BE_EXTR PS_BE_EXTRA_LOW_RATE_AC None PS_BE_EXTRA_LO

RESERVED_SWITCH_0_BI RESERVED_ RESERVED_SWITCH_0_BIT1, R None RESERVED_SWIT

RESERVED_SWITCH_1_BI RESERVED_ RESERVED_SWITCH_1_BIT1, R None RESERVED_SWIT

0 0~429496720~4294967295 None 0

4294967295 0~429496720~4294967295 None 4294967295

0 0~255 0~255 None 0

255 0~255 0~255 None 255

SRNSR_DSCR_IUR_RESRC SRNSR_DSC SRNSR_DSCR_IUR_RESRCE_S None SRNSR_DSCR_IUR


22/94

Parameter groups affectedADD UCELLSETUP(Mandatory)ADD UCELLQUICKSETUP(Mandatory)

ADD UCELLAMRCWB(Mandatory)ADD UCELLDCCC(Mandatory)ADD UCELL

ADD ULASNAMAP(Mandatory)ADD UCZ(Mandatory)ADD UEXT3GCELL(Ma

ADD UEXT3GCELL(Mandatory)ADD UCELLSETUP(Mandatory)ADD UCELLQ

ADD UEXT3GCELL(Mandatory)ADD UEXT2GCELL(Mandatory)ADD UCELLSE

ADD UCELLSETUP(Mandatory)ADD ULOCELL(Mandatory)ADD UCELLQUICK

ADD UCELLSETUP(Optional)

ADD UCELLSETUP(Optional)ADD UCELLQUICKSETUP(Optional)

ADD UCELLSETUP(Mandatory)ADD UCELLQUICKSETUP(Mandatory)

ADD UCELLSETUP(Mandatory)ADD UCELLQUICKSETUP(Mandatory)

ADD UCELLSETUP(Mandatory)

ADD UCELLSETUP(Optional)ADD UCELLQUICKSETUP(Optional)

ADD UNRNC(Mandatory)

ADD UNRNCURA(Mandatory)

ADD URNCBASIC(Mandatory)

ADD UNODEB(Mandatory)

FOC UDEHOSTNODEB(Mandatory)

FOC UHOSTNODEB(Mandatory)

ADD UIPDL(Mandatory)ADD UNODEBALGOPARA(Mandatory)ADD UNODE

ADD UCZ(Mandatory)ADD UCELLSETUP(Mandatory)ADD UCELLQUICKSET

SET UIDLEMODETIMER(Optional)SET UIDLEMODETIMER(Optional)

ADD UCNDOMAIN(Optional)

SET UFRC(Optional)

SET UIDLEMODETIMER(Optional)SET UCONNMODETIMER(Optional)

SET UIDLEMODETIMER(Optional)SET UCONNMODETIMER(Optional)

ADD UINTRAFREQNCELL(Optional)

ADD UINTERFREQNCELL(Optional)

ADD U2GNCELL(Optional)

ADD UINTRAFREQNCELL(Optional)ADD UINTERFREQNCELL(Optional)




ADD UCELLSELRESEL(Optional)







23/94







ADD UCELLSELRESEL(Optional)ADD UCELLSELRESEL(Optional)


ADD UCELLHCS(Optional)


ADD UINTRAFREQNCELL(Optional)ADD UINTERFREQNCELL(Optional)ADD

ADD UINTRAFREQNCELL(Optional)ADD UINTERFREQNCELL(Optional)ADD






ADD UCELLACCESSSTRICT(Optional)

ADD UCELLACCESSSTRICT(Mandatory)

ADD UCELLACCESSSTRICT(Mandatory)







ADD UCELLACCESSSTRICT(Optional)ADD UCELLACCESSSTRICT(Optional)









SET UFRC(Optional)

SET UFRC(Optional)

ADD USSCH(Optional)

ADD URACH(Optional)

ADD URACH(Optional)

ADD URACH(Optional)

ADD UPSCH(Optional)

ADD UPRACHTFC(Optional)

ADD UPRACHTFC(Mandatory)

ADD UPRACHTFC(Mandatory)


24/94

ADD UPRACHBASIC(Optional)



ADD UPCPICH(Optional)ADD UCELLQUICKSETUP(Optional)

ADD UPCH(Optional)

ADD UFACH(Optional)

ADD UCHPWROFFSET(Optional)ADD UCHPWROFFSET(Optional)

ADD UCELLCAC(Optional)




ADD UBCH(Optional)

ADD UAICH(Optional)

ADD UPICH(Optional)

ADD UPRACHBASIC(Mandatory)

ADD UPRACHBASIC(Mandatory)

ADD UPRACHSLOTFORMAT(Mandatory)


ADD UCELLHSDPA(Optional)




ADD UINTRAFREQNCELL(Mandatory)ADD UINTERFREQNCELL(Mandatory)


SET UINTRAFREQHO(Optional)ADD UCELLINTRAFREQHO(Optional)


SET UINTRAFREQHO(Optional)ADD UCELLINTRAFREQHO(Optional)SET UINTRAFREQHO(Optional)ADD UCELLINTRAFREQHO(Optional)











SET UHOCOMM(Optional)

ADD UINTRAFREQNCELL(Mandatory)ADD UINTERFREQNCELL(Mandatory)

ADD UINTERFREQNCELL(Mandatory)

ADD UINTERFREQNCELL(Mandatory)


SET UINTERFREQHOCOV(Optional)SET UINTERFREQHONCOV(Optional)AD

SET UINTERFREQHOCOV(Optional)ADD UCELLINTERFREQHOCOV(Optional



25/94







SET UINTERFREQHOCOV(Optional)ADD UCELLINTERFREQHOCOV(OptionalSET UINTERFREQHOCOV(Optional)ADD UCELLINTERFREQHOCOV(Optional






SET UINTERRATHOCOV(Optional)ADD UCELLINTERRATHOCOV(Optional)












SET UINTERRATHOCOV(Optional)ADD UCELLINTERRATHOCOV(Optional)A


SET UINTERRATHOCOV(Optional)ADD UCELLINTERRATHOCOV(Optional)SET UINTERRATHOCOV(Optional)ADD UCELLINTERRATHOCOV(Optional)

SET UINTERRATHOCOV(Optional)SET UINTERRATHONCOV(Optional)ADD U

ADD UCELLMBDRINTERRAT(Optional)


ADD UEXT2GCELL(Mandatory)



ADD ULASNAMAP(Mandatory)ADD UCZ(Mandatory)ADD UEXT3GCELL(Ma

SET USTATETIMER(Optional)

ADD U2GNCELL(Mandatory)

ADD U2GNCELL(Mandatory)



ADD UCELLHSUPA(Optional)

SET UFRCCHLTYPEPARA(Optional)

ADD UCELLALGOSWITCH(Optional)





26/94


SET UUESTATETRANSTIMER(Optional)

SET UUESTATETRANS(Optional)

SET UCONNMODETIMER(Optional)



SET UCONNMODETIMER(Optional)SET UCONNMODETIMER(Optional)










ADD UCELLURA(Mandatory)ADD UURA(Mandatory)


SET UDCCC(Optional)

SET UDCCC(Optional)



SET UPSINACTTIMER(Optional)




SET UFRC(Optional)SET UFRC(Optional)


SET UDCCC(Mandatory)

ADD UCELLDCCC(Optional)SET UDCCC(Optional)

SET UUSERGBR(Optional)

SET UDCCC(Mandatory)

ADD UCELLDCCC(Optional)SET UDCCC(Optional)

SET UUSERGBR(Optional)






ADD ULASNAMAP(Mandatory)ADD UIMSISNAMAP(Mandatory)ADD UCN

ADD ULASNAMAP(Mandatory)ADD UIMSISNAMAP(Mandatory)ADD UCN

SET UIUTIMERANDNUM(Mandatory)ADD UCNNODE(Mandatory)ADD UNR


ADD UCNDOMAIN(Mandatory)ADD UCNNODE(Mandatory)

ADD UCNNODE(Mandatory)


27/94

ADD OPC(Optional)

SET UIUTIMERANDNUM(Optional)




ADD UCELLMBMSFACH(Optional)ADD UPCH(Optional)

ADD UCELLMBMSFACH(Optional)ADD UPCH(Optional)SET ULDM(Mandatory)SET USATLDM(Mandatory)

SET ULDM(Mandatory)SET USATLDM(Mandatory)

ADD UNRNC(Mandatory)ADD UCNNODE(Optional)ADD UNODEB(Optional

SET UCORRMALGOSWITCH(Optional)


















28/94

AMRC(Mandatory) ADD UCELLGPSFRMTIMING(Mandatory)ADD UCELLQUALITYMEAS(Mandatory)ADD U

ndatory)ADD UEXT2GCELL(Mandatory)ADD UCELLSETUP(Mandatory)ADD ULAC(Mandatory)ADD UCELL

ICKSETUP(Mandatory)

TUP(Mandatory) ADD UCELLQUICKSETUP(Mandatory)ADD URAC(Mandatory)

SETUP(Mandatory)

LDR(Mandatory) ADD UNODEBOLC(Mandatory)ADD UCCP(Mandatory)ADD UCELLSETUP(Mandatory)AD

P(Mandatory)ADD USAC(Mandatory)


29/94

2GNCELL(Optional)

2GNCELL(Optional)


30/94

UCELLINTERFREQHOCOV(Optional)ADD UCELLINTERFREQHONCOV(Optional)

)

)


31/94

)

)

)

)

)

)

))

)

)

)ADD UCELLMBDRINTERFREQ(Optional)

)

)

D UCELLMBDRINTERRAT(Optional)

CELLINTERRATHOCOV(Optional)ADD UCELLINTERRATHONCOV(Optional)

ndatory)ADD UEXT2GCELL(Mandatory)ADD UCELLSETUP(Mandatory)ADD ULAC(Mandatory)ADD UCELL


32/94

PERATOR(Mandatory)

PERATOR(Mandatory)

IGLBCNIDMAP(Mandatory) ADD UIMSIIDNNSCNIDMAP(Mandatory)


33/94

)


34/94

ELLACCESSSTRICT(Mandatory) ADD UCELLALGOSWITCH(Mandatory)ADD UCELLCAC(Mandatory)ADD UC

UICKSETUP(Mandatory) ADD URAC(Mandatory)ADD USAC(Mandatory)

ULOCELL(Mandatory) ADD UNBNODESYNCMONPARA(Mandatory)ADD UNCP(Mandatory)ADD UNODE


35/94


36/94


37/94

UICKSETUP(Mandatory) ADD URAC(Mandatory)ADD USAC(Mandatory)


38/94


39/94


40/94

ELLDSACMANUALPARA(Mandatory) ADD UCELLHCS(Mandatory)ADD UCELLLDB(Mandatory)ADD UCELLL

(Mandatory)ADD UCELLQUICKSETUP(Mandatory)ADT URES(Mandatory)BLK UNODEB(Mandatory)


41/94


42/94


43/94


44/94


45/94


46/94

M(Mandatory) ADD UCELLLDR(Mandatory)ADD UCELLMEAS(Mandatory)ADD UCELLOLC(Mandatory)AD


47/94


48/94


49/94


50/94


51/94


52/94

D UCELLPUC(Mandatory) ADD UCELLRLPWR(Mandatory)ADD UCELLSELRESEL(Mandatory)ADD UPRACH


53/94


54/94


55/94


56/94


57/94


58/94

CTOASCMAP(Mandatory) ADD URESERVEOVSF(Mandatory)ADD UAICH(Mandatory)ADD UBCH(Mandato


59/94


60/94


61/94


62/94


63/94


64/94

ry)ADD UCELLCBSDRX(Mandatory)ADD UCELLDYNSHUTDOWN(Mandatory)ADD UCELLEFACH(Mandator


65/94


66/94


67/94


68/94


69/94


70/94

)ADD UCELLHSDPA(Mandatory)ADD UCELLHSUPA(Mandatory)ADD UCELLMBMSFACH(Mandatory)ADD


71/94


72/94


73/94


74/94


75/94


76/94


77/94


78/94


79/94


80/94


81/94


82/94

D UCELLMCCH(Mandatory) ADD UCELLSETUP(Mandatory)ADD UCELLSIBSWITCH(Mandatory)ADD UCEL


83/94


84/94


85/94


86/94


87/94


88/94

LURA(Mandatory) ADD UCHPWROFFSET(Mandatory)ADD UCTCH(Mandatory)ADD UFACH(Mandatory)AD


89/94


90/94


91/94


92/94


93/94


94/94

D UF

Documents

3G RAN12 Huawei Recommended Parameters_v1.0