5
8/8/2019 3ddecoupage http://slidepdf.com/reader/full/3ddecoupage 1/5 3D Découpage 3 Cut out parts shown. Cut tankard at top and bottom rim and cut the froth where shown. Sticky fix into place and glue the froth and tankard where shown. Cut out parts as shown. Sticky fix froth into place and glue where shown. Sticky fix handle into place and glue ends as shown. Cut bear at shirt as shown. Sticky fix into place and glue legs where shown.  Just look at these gorgeous 3D découpage papers. There are ten lovely designs to choose from, all are particularly suitable for making either St. Valentines Day or Mother’s Day cards. They can of course be used for many other occasions as well. The 3D découpage papers used are DC247 to DC256 and they all fit AP48 cards. As they all have good strong background colours they also look equally good in white AP48G cards, with a gold or holographic silver borderline. The first layer of each design is a full print which should be mounted into the card before starting work on the cut layers, except for the teddy in clouds (DC250) which needs mounting after completion to keep the cloud edges behind the aperture. White gaps on the diagrams show a cut and red or blue lines show where to glue. There are lots of instructions to fit on each page with these designs so we have abbreviated ‘sticky fix’ to just ‘fix’ where necessary. Sticky fixers are too large as they come and need cut- ting into about eight pieces before use. Where the instruction call for glueing, place the sticky fixer as far away as possible from the area to be glued so the paper can curve naturally downward. Cut out parts shown.Cut earas shown and fold collar up where it joins head. Gently  bend ear up, sticky fix head into place and glue at collar. Cut arm at fold where shown. Gently fold card along fold line, sticky fix into place and glue top of arm. Sticky fix leg into place tucking the top under the shirt of previous layer and glue.

3ddecoupage

Embed Size (px)

Citation preview

Page 1: 3ddecoupage

8/8/2019 3ddecoupage

http://slidepdf.com/reader/full/3ddecoupage 1/5

3D Découpage

3

Cut out parts shown. Cut tankard at topand bottom rim and cut the froth where

shown. Sticky fix into place and glue thefroth and tankard where shown.

Cut out parts as shown. Sticky fix frothinto place and glue where shown. Sticky

fix handle into place and glue ends asshown. Cut bear at shirt as shown. Stickyfix into place and glue legs where shown.

 Just look at these gorgeous 3D découpagepapers. There are ten lovely designs to choosefrom, all are particularly suitable for making

either St. Valentines Day or Mother’s Day cards.They can of course be used for many otheroccasions as well.

The 3D découpage papers used are DC247to DC256 and they all fit AP48 cards. As they allhave good strong background colours they alsolook equally good in white AP48G cards, with agold or holographic silver borderline.

The first layer of each design is a full printwhich should be mounted into the card before

starting work on the cut layers, except for theteddy in clouds (DC250) which needs mountingafter completion to keep the cloud edges behindthe aperture. White gaps on the diagrams showa cut and red or blue lines show where to glue.

There are lots of instructions to fit on eachpage with these designs so we have abbreviated‘sticky fix’ to just ‘fix’ where necessary. Stickyfixers are too large as they come and need cut-ting into about eight pieces before use.

Where the instruction call for glueing, placethe sticky fixer as far away as possible from thearea to be glued so the paper can curve naturallydownward.

Cut out parts shown.Cut ear as shown andfold collar up where it joins head. Gently

 bend ear up, sticky fix head into place andglue at collar. Cut arm at fold whereshown. Gently fold card along fold line,sticky fix into place and glue top of arm.Sticky fix leg into place tucking the topunder the shirt of previous layer and glue.

Page 2: 3ddecoupage

8/8/2019 3ddecoupage

http://slidepdf.com/reader/full/3ddecoupage 2/5

4

1.Cut out parts shown andcut between two bears.Curve yellow bear downand sticky fix into place.

2. Cut out parts shown.Cut around yellow hat asshown, fix hat into placeand glue both ends. Cut

3. Cut out parts shown. Fix boot into place and glue back where shown. Cutpocket flap away fromsleeve and glue at top only.Cut stick from umbrellaand fix into place, glueinghand and top of stick. Fixthe umbrella into place.

Cut out parts shown. Cut between roses and wrapperwhere shown. Sticky fixinto place and glue flowerswhere shown.

Cut out parts shown. Cut between flowers and ear.Fix flowers into place andglue where shown. Cut between bow and ear,fix bow into place. Cut between cat and bag whereshown, lightly fold along bag corner. Fix into placeand glue cat where shown.

Cut out parts shown. Fixroses into place and gluestems where shown. Fix bow tail into place and glueat top where shown. Fixnose into place and cut between paws and handleas shown. Fix handle intoplace and glue the ends asshown. Fix paws into place.

Don’t mount into the carduntil complete. Cut outparts shown. Sticky fix ted

on cloud into place. Stickyfix all other clouds by theinner edge and glue eachof them outside the picturearea as shown.

Cut out parts shown. Stickyfix part cloud by the inneredge only and glue where

shown. Sticky fix nose intoplace. Cut between armsand body as shown. Stickyfix into place and glue armswhere shown.

Cut out parts shown. Cut between clouds and feet asshown. Sticky fix feet into

place and glue at basewhere shown. Gently bendthe bottom edge of eachside cloud down and stickyfix into place. Fix bottomcloud into place.

yellow sleeve and cut bootaway from coat. Cut toe of boot, sticky fix into placeand glue where shown. Fixcoat into place and glue.Cut blue hat, fix and glue.Cut around umbrella han-dle and sleeve, fix intoplace and glue sleeve.

Page 3: 3ddecoupage

8/8/2019 3ddecoupage

http://slidepdf.com/reader/full/3ddecoupage 3/5

5

Cut out parts shown. Cut between tail and leg whereshown. Cut the tail by theface where shown. Stickyfix into place and glue tailin two places as shown.

Cut out parts shown. Stickyfix rose into place and glueleaf where shown. Cut between tummy and legwhere shown. Sticky fixinto place and glue tummywhere shown.

Cut out parts shown. Stickyfix rose and nose into place.Cut the bow as shown.Bend the front bow tail upand the loop gently down.Sticky fix into place andglue bow where shown.

1. Cut out parts shown andsticky fix into place.

2. Cut out parts shown. Cut between ears as shown.Sticky fix back ear intoplace and glue whereshown. Cut between trunkand mouth, and trunk endand face as shown. Gently

 bend the head down by thecuts at ears. Gently bendthe mouth down and theface behind the end oftrunk and sticky fix intoplace.

3. Cut out part shown. Cut between arm and headand body as shown. Cut between the body and legas shown. Bend the tummydown away from the armand leg and gently bendthe arm up. Sticky fix intoplace.

Cut out parts shown andsticky fix into place.

Cut out parts shown. Cut between face and flower,paws and bow, and leavesand arms where shown.

Sticky fix into place andglue face, arms and bowwhere shown. Sticky fixfoot into place.

Cut out parts shown. Cut between the daffodilswhere shown. Cut betweenthe outer petals of each

flower and gently bend togive a good shape thensticky fix into place. Stickyfix bow into place glueingthe knot as shown. Stickyfix foot into place.

Page 4: 3ddecoupage

8/8/2019 3ddecoupage

http://slidepdf.com/reader/full/3ddecoupage 4/5

6

1. Cut out parts shown andsticky fix into place.

2. Cut out parts shown.Sticky fix nose into place.Cut between dress andapron as shown. Sticky fixinto place and glue dresswhere shown.

3. Cut out parts shown. Cut between mum’s and baby’sarms where shown. Stickyfix arm and slipper furinto place and glue whereshown. Cut between headand arm where shown. Cutear where shown, gently bend ear up. Sticky fix head

into place and glue whereshown. Cut around tail asshown and between footand leg as shown. Gently bend tail up and bottomdown to accentuate tail. Fix body into place and glue back and leg as shown.Sticky fix foot into place.

Cut out parts shown, cut between bath and bottles.Cut between the feet and between brush and hand.

Bend hand below the brushgently down. Fix into placemaking sure to put a bit ofpad on the brush handle tohold it forward. Glue footand bath then fix bubbles.

Cut out parts shown. Cut between face and hat, and bubbles and face. Sticky fixtop into place and glue face

and bath rim. Cut betweentowel and bowl and be-tween soap and talc whereshown. Fix base into placeand glue towel and talc asshown, sticky fix bubbles.

Cut out parts shown. Glueear by bottom edge with nopad. Fix bubbles into place.Glue bow tail by edge.

Sticky fix other items intoplace.

1. Cut out parts shown andsticky fix into place.

2. Cut out parts shown. Cut between ear and bow asshown. Cut between catand bag on both sides asshown. Gently curve theface down and lightly foldthe corner of the bag. Sticky

fix into place and glue thecat’s face where shown.Sticky fix flowers into place.

3. Cut out parts shown.Sticky fix rose parts intoplace. Curve the petals ofthe purple flowers up andglue by the centres withoutusing a pad. Sticky fix nose

and ribbon into place. Gluetop of ribbon where shown.Cut between paws and baghandle. Sticky fix handle atcentre and glue both endsas shown. Sticky fix bothpaws into place.

Page 5: 3ddecoupage

8/8/2019 3ddecoupage

http://slidepdf.com/reader/full/3ddecoupage 5/5

Hello,

We hope you enjoy this free project. You may hand make copies of this project,to give away or sell, as many times as you like. You may not use the pattern,project, text or pictures for any other purpose nor make the project usingany automated process.

The project was taken from a back issue of the Craft Creations Magazine.

All the articles on our web site are at least one year old. If you want the latestprojects, designer profiles, gallery pages and more, then you need to subscribeto the quarterly Craft Creations Magazine.

Subscription Benefits Include:

* A free gift with every issue.

* Two discount vouchers off Craft Creations products with every issue.

* A £2.50 off post and packing voucher with every issue.

* New product information.

* Prize competitions in every issue.

You can subscribe to the quarterly Craft Creations Magazine or purchase anyof the back issues from our online shop.

The details above are correct as of 1st January 2003, but are subject to change without prior notice.Craft Creations Limited, Ingersoll House, Delamare Road, Cheshunt, Hertfordshire, EN8 9HD, England.

Tel: 01992 781900 Fax: 01992 634339