TEST SPEC [5JJ00537] OCTOBER 07, 2012(5JJ00537)-ENGINE (AKT00267)-MACHINE (TCE00082)-TRANSMISSION PACKAGE (7SY01011)-TRANSMISSION

For Help Desk Phone Numbers Click here

Reference Number: 0K4012 Effective Serial Number: 5JJ00001

Model: 3412E DI TA AAAC Make from Spec:

Test Spec DataDescription Measure Nominal Ceiling FloorCorr Full Load Power kW 493.0 498.0 488.0

Full Load Speed RPM 1800 1810 1790

High Idle Speed RPM 2110 2120 2100

Low Idle Speed RPM 700 710 690

FL Static Fuel Setting mm 18.570

FT Static Fuel Setting mm 21.170

FLS (Intercept) 15

FTS (Slope) -25

Corrected Fuel Rate G/MIN 1,758.0 1,846.0 1,670.0

CSFC G/KW.H 209.0 221.6 196.4

Adjusted Boost KPA 96.8 111.4 82.2

Torque Check Speed RPM 1200 1210 1190

Corr Torq Rise at TC RPM % 13.3

Corr Torque at TC RPM N.M 2,964 3,172 2,756

C Fuel Rate at TC RPM G/MIN 1,366.0 1,435.0 1,297.0

CSFC at TC RPM G/KW.H 220.0 233.2 206.8

ADJ Boost at TC RPM KPA 65.0 74.8 55.2

Power Loss/Cyl % C FL PWR 10.5 16.0

Specific Blowby L/KW.H

Temp Jacket Water Pump Inlet C 89 92 86

Delta T Jacket Water (out-in) C 6 11 1

Inlet Manifold Temp C 55 65 45

Water Temp to Scac C

Scac Water Flow L/MIN

Oil Pressure KPA 303 600 250

Oil Pressure Low Idle KPA 117 600 85Fuel Pressure KPA 498 600 300Inlet Fuel Pressure KPA 20Inlet Fuel Temp C 30 35 25Inlet Air Pressure KPA 104 87Inlet Air Restriction KPA 4.00Inlet Air Temperature C 50 10Fuel Density DEG API 36.0 34.0Boost Constant 1.0Governor Setting ConstantGovernor Setting Torque % RTD TRQHigh Idle Stability RPM

Page 1 sur 5

Low Idle Stability RPMSet Point RPM RPM 1820 1830 1810

Page 2 sur 5

Engine Reference InformationDescription Measure VariablesFL Static/FT Static Fuel Settings mm 18.57 / 21.17Fuel Valve Part NumberUnit Injector Part Number 2091995 Timing Dimension Field Service mmTiming Dimension FactoryTorque Control Group Number Change Level: Fuel Pump/Gov Grp Part Number 2092785 Fuel Pump Type HUIFlyweight Part Number/AttitudeTurbo Part No and Model 1741471 / GTA500201BL-1.41 Advertised Power / Governor Speed 433.0kW 1,800 RPMCompression Ratio 16.0Torque Rise Cam Part NumberManifold Type DRY Engine Flash File Part Number 2143387 Interlock Code 111

Page 3 sur 5

Torque Control GroupSpring Data

Part No Thickness QuantityNo data found...

Torque Control GroupSpacer Data

Part No Thickness QuantityNo data found...

Timing DataMechanical Advance Part Number: Chg. Level:

Advance: 0.0 DEG Dog Leg Differentials: RPM: -- KW: --

Description Measure Spec Minimum MaximumTiming Static @ 0 RPM BTDC DEG -2.0 2.0

Governor Type ELEC

Page 4 sur 5

Application/Performance DataDescription Measure VariableApplication IdentificationEngine Sales Model and Series 3412 ECombustion System type DIAspiration Type TAEngine Source Factory Ref Number 40Power Setting PL/PP Ref NumberEngine Perf Data Ref No and Change LevelMulti Engine Torq/RatingEmissions FamilyGenerator Rating W/O Fan EKWGenerator HZBrakesaver testCertified Engine Rating kWEngineering Model Ref T725 T725 Low Idle In-Veh Speed RPM 700Sales Model D10R Machine Facility 16Usage STD Transmission EP Description TTSerial Number Prefixs 3KR

Altitude Derating InformationDescription Measure Data:Altitude - Maximum M 4,500Engine Power Advertised kW 433Engine Power Test kW 493High Idle Speed RPM 2110FL Static Fuel Setting mm 18.57FT Static Fuel Setting mm 21.17Corrected Fuel Rate G/MIN 1,758.0FL Boost Pressure W/(A/C & Muff) KPA 96.8

Stall Speed RPMStall Boost Press KPA

Spec Number vs. Arrangement Number Cross ReferenceArrangement Arrangement Arrangement Arrangement Arrangement1715800 1715806

Caterpillar Confidential: GreenContent Owner: Shane GillesWeb Master(s): PSG Web Based Systems SupportCurrent Date: dimanche 7 octobre 2012 13:01:27© Caterpillar Inc. 2012 All Rights Reserved.Data Privacy Statement.

Page 5 sur 5