Upload
halien
View
213
Download
0
Embed Size (px)
Citation preview
UNLESS OTHERWISE SPECIFIEDALL TOLERANCES .005
Bearing Health Test FixtureAPPROVED BY: P13505REV. A.0 5/1/13 MSDX101
ITEMNO PART NUMBER QTY DESCRIPTION NOTES
1 3690 16 Mounting Hardware - L Brackets2 4119 83 MSDX002 1 Base Plate4 MSDX102 1 Lower Mount Assembly5 MSDX103 1 Motor Assembly6 MSDX104 1 Arbor Press Assembly
3
4
5
6
1
2
UNLESS OTHERWISE SPECIFIEDALL TOLERANCES .005
6.000
24.000
36.000
.250 ALL
2.000
2.000
1.000
1.000
Base PlateAPPROVED BY: P13505REV. A.0 5/1/13 MSDX002
REV. DESCRIPTON PART NUMBER DATE APPROVEDA.0 BASE PLATE MSDX002 5/1/13 P13505
SCALE 0.250
UNLESS OTHERWISE SPECIFIEDALL TOLERANCES .005
Lower Mount AssemblyAPPROVED BY: P13505REV. A.0 5/1/13 MSDX102
ITEMNO PART NUMBER QTY DESCRIPTION NOTES
1 1/4" - 20 SHCS 2 Socket Head Cap Screw for Clamp
2 3690 16 80/20 Part3 3785 12 80/20 Part4 4119 8 80/20 Part5 6415 2 80/20 Part6 6850 2 80/20 Part7 101006CL 2 101006cl.prt 80/20 Part8 101012CL 2 80/20 Part9 DOWEL_PIN 2 McMasterr Part
10 MSDX001 1 Lower Bearing Carrier
11 MSDX007 2 Adapter Flange
12 MSDX010 1 Top Bearing Carrier
13 MSDX011 2 Accelerometer Purchased14 SKF_6010_2RS1 1 6010 Bearing for XEROX Test Bearing
SCALE 0.500
1
2
3
4
5
6
7 8
9
10
11
12
13
14
UNLESS OTHERWISE SPECIFIEDALL TOLERANCES .005
.750
-3.15113.1501
2.800
R.025
2X .125 0.250.750
.500
4X .375
.100
.3504.900
5.300
5.650
.375
.200.950
2X 1.325
2.075 2X R.063
2.8250±.0005
.750
4.900
.675 REF
LOWER BEARING CLAMP HALFAPPROVED BY:REV. DATE MSDX001
REV. DESCRIPTON PART NUMBER DATE APPROVED
BREAK ALL EDGES
SCALE 0.500
1/4-20 UNC - 2B TAP 0.482 #7 DRILL ( 0.201 ) -( 2 ) HOLE THRU
SECTION HALF-HALF
BOTH SIDES8-32 UNC - 2B TAP 0.326 #29 DRILL ( 0.136 ) 0.625 -( 2 ) HOLE
.650
1.875
.437
2X R.250
1.300
.613
3X .275
1.025
2X .940
1.437
1.263
.250
RAIL ADAPTERAPPROVED BY: P13505REV. A.0 2/5/13 MSDX007
REV. DESCRIPTON PART NUMBER DATE APPROVEDA.0 ADAPTER FOR MOUNT MSDX007 2/5/13 P13505
UNLESS OTHERWISE SPECIFIEDALL TOLERANCES .005
1/4-20 UNC - 2B TAP THRU #7 DRILL ( 0.201 ) THRU -( 2 ) HOLE 8-32 UNC - 2B CLEAR
#18 DRILL ( 0.170 ) -( 2 ) HOLE THRU
BB
A
A
UNLESS OTHERWISE SPECIFIEDALL TOLERANCES .005
R.025
2X .250
.250R.050.350
.750
4.9005.300
2X .125
.750
.375
2.800
2.075
1.000BOTH SIDES
5.650
.100
3.15013.1511
.500 REF .675 REF
TOP BEARING CARRIERAPPROVED BY: K.ALBINOREV. A 2/18/13 MSDX010
REV. DESCRIPTON PART NUMBER DATE APPROVEDA DIMENSIONED MSDX010 2/18/13 K. ALBINO
SCALE 1.500SECTION B-B
SECTION A-A
UNLESS OTHERWISE SPECIFIEDALL TOLERANCES .005
Motor AssemblyAPPROVED BY: P13505REV. A.0 5/1/13 MSDX103
ITEMNO PART NUMBER QTY DESCRIPTION NOTES
1 1/4" - 20 x 2.5" SHCS 6 Cap Screw for Base Block McMaster Part
2 3_8-16_5_8 4 McMaster Part
3 CLX-8-8-F 1 Grainger Part
4 MSDX003 1 motor_bill.prt Provided
5 MSDX014 1 mandrel.prt6 MSDX015 1 drive_shaft.prt7 MSDX018 1 Motor Mounting Block
SCALE 0.750 1
2
3
4
5
6
7
A
A
UNLESS OTHERWISE SPECIFIEDALL TOLERANCES .005
1.96931.9712
.625
2.125
.875
.438
.500
.050
1.966
.500
.266
Press Fit MandrelAPPROVED BY: P13505REV. A.1 5/1/13 MSDX014
REV. DESCRIPTON PART NUMBER DATE APPROVEDA.0 CLEANED UP DIM MSDX014 2/8/13 P13505A.1 CLEARANCE TIP MSDX014 5/1/13 P13505
"CLEARANCE TIP"
SCALE 1.500SECTION A-A
1/4-28 UNF - 2B TAP 1.000 #3 DRILL ( 0.213 ) -( 1 ) HOLE THRU
SEE DETAIL A
SCALE 7.000DETAIL A
32
A
A
UNLESS OTHERWISE SPECIFIEDALL TOLERANCES .005
.500
2.840
.357
.075
.890
.020
1.390
Drive ShaftAPPROVED BY: P13505REV. A.0 5/1/13 MSDX015
REV. DESCRIPTON PART NUMBER DATE APPROVEDA.0 DRIVE SHAFT MSDX015 5/1/13 P13505
BREAK ALL EDGES
SCALE 3.000
SCALE 3.000SECTION A-A
2X 1.0002X 4.000
2X 7.000
2X 3.100
2X 1.600
2X 1.550
2X 4.450
6.000
1.838
8.500
MOTOR MOUNTAPPROVED BY:REV. 2-8-13 MSDX018
REV. DESCRIPTON PART NUMBER DATE APPROVED
UNLESS OTHERWISE SPECIFIEDALL TOLERANCES .005
1/4-20 UNC - 2B CLEAR F DRILL ( 0.257 ) -( 6 ) HOLE THRU
1/4-20 UNC - 2B TAP 0.480 #7 DRILL ( 0.201 ) 0.750 -( 4 ) HOLE
A
A
2.000
3.750
2.200
.125
3.155 +.003-.003
R.050
0.020 X 45.03 PL
3.350 +.003-.003
PRESS OUT PLATEAPPROVED BY:REV. - 2/15/13 MSDX020
REV. DESCRIPTON PART NUMBER DATE APPROVED
ALL ANGLETOLERANCES 5.0
SCALE 1.5:1
UNLESS OTHERWISE SPECIFIEDALL TOLERANCES .005
SECTION A-A
SEE DETAIL A
SCALE 3.000DETAIL A
A
A
.250
.7102.125 +.002
-.002
1.750
.050 X 45.0
.050 X 45.0
28.4°
3.350 +.003-.003
.900
3.600
PRESS ALIGNMENT CUPAPPROVED BY:REV. - 2/15/13 MSDX021
REV. DESCRIPTON PART NUMBER DATE APPROVED
ALL ANGLETOLERANCES 5.0
SCALE 1.5:1
UNLESS OTHERWISE SPECIFIEDALL TOLERANCES .005
SECTION A-A
3/8"
3/16"Hex
1/4" 3/4"
0.250"
1/4"-20 Thread
91251A540Socket Head Cap ScrewBlack-Oxide Alloy Steel
Unless otherwise specified, dimensions are in inches. Information in this drawing is provided for reference only.
http://www.mcmaster.com© 2008 McMaster-Carr Supply Company
NUMBERPART
3/8"
3/16"Hex
1/4" 2 1/2"
0.250"
1/4"-20 Thread
Thread length may vary from1" to 1 1/2" in length.
91251A552Socket Head Cap ScrewBlack-Oxide Alloy Steel
Unless otherwise specified, dimensions are in inches. Information in this drawing is provided for reference only.
http://www.mcmaster.com© 2008 McMaster-Carr Supply Company
NUMBERPART
15/32"
1/4"Hex
5/16" 1"
0.313"
5/16"-18 Thread
91251A583Socket Head Cap ScrewBlack-Oxide Alloy Steel
Unless otherwise specified, dimensions are in inches. Information in this drawing is provided for reference only.
http://www.mcmaster.com© 2008 McMaster-Carr Supply Company
NUMBERPART
Flat Socket Head Cap Screw
91253A197Black-Oxide Alloy Steel
NUMBERPART
http://www.mcmaster.com© 2006 McMaster-Carr Supply Company
Unless otherwise specified, dimensions are in inches. Information in this drawing is provided for reference only.
82° .164
3/4"
.112
#8-32 Thread
Hex3/32"
.359
NUMBERPART
Information in this drawing is provided for reference only.
http://www.mcmaster.com
1/8" 1/2" ±0.010+0.0002- 0.0000
97395A441Type 316 Stainless Steel
Dowel Pin© 2012 McMaster-Carr Supply Company
Technical SalesUnited States(866) [email protected]
Model Number 352C33 ACCELEROMETER, ICP® Revision H
ECN #: 28610 Performance ENGLISH SI
Sensitivity (±10 %) 100 mV/g 10.2 mV/(m/s²) Measurement Range ±50 g pk ±490 m/s² pk Frequency Range (±5 %) 0.5 to 10000 Hz 0.5 to 10000 Hz Frequency Range (±10 %) 0.3 to 15000 Hz 0.3 to 15000 Hz Resonant Frequency ≥50 kHz ≥50 kHz Broadband Resolution (1 to 10000 Hz) 0.00015 g rms 0.0015 m/s² rms [1] Non-Linearity ≤1 % ≤1 % [4] Transverse Sensitivity ≤5 % ≤5 % [5]
Environmental Overload Limit (Shock) ±5000 g pk ±49000 m/s² pk Temperature Range (Operating) -65 to +200 °F -54 to +93 °C [3][3] Base Strain Sensitivity 0.003 g/µε 0.029 (m/s²)/µε [1]
Electrical Excitation Voltage 18 to 30 VDC 18 to 30 VDC Constant Current Excitation 2 to 20 mA 2 to 20 mA Output Impedance ≤200 Ohm ≤200 Ohm Output Bias Voltage 7 to 12 VDC 7 to 12 VDC Discharge Time Constant 1.0 to 2.5 sec 1.0 to 2.5 sec Settling Time (within 10% of bias) <10 sec <10 sec Spectral Noise (1 Hz) 39 µg/√Hz 380 (µm/sec2 /√Hz [1] Spectral Noise (10 Hz) 11 µg/√Hz 110 (µm/sec2 /√Hz [1] Spectral Noise (100 Hz) 3.4 µg/√Hz 33 (µm/sec2 /√Hz [1] Spectral Noise (1 kHz) 1.4 µg/√Hz 14 (µm/sec2 /√Hz [1]
Physical Size (Height) 0.62 in 15.7 mm Weight 0.20 oz 5.8 gm [1] Sensing Element Ceramic Ceramic Size (Hex) 0.44 in 11.2 mm Sensing Geometry Shear Shear Housing Material Titanium Titanium Sealing Hermetic Hermetic Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack Electrical Connection Position Side Side Mounting Thread 10-32 Female 10-32 Female Mounting Torque 10 to 20 in-lb 113 to 226 N-cm
[6]
All specifications are at room temperature unless otherwise specified. In the interest of constant product improvement, we reserve the right to change specifications without notice. ICP® is a registered trademark of PCB group, Inc.
Optional Versions (Optional versions have identical specifications and accessories as listed for standard model except where noted below. More than one option maybe used.)
HT - High temperature, extends normal operation temperatures [3] Frequency Range (5 %) 6 to 10000 Hz 6 to 10000 Hz Frequency Range (10 %) 4.5 to 15000 Hz 4.5 to 15000 Hz Broadband Resolution (1 to 10000 Hz)
0.0009 g rms 0.009 m/s² rms
Temperature Range (Operating) -65 to +325 °F -54 to +163 °C Excitation Voltage 22 to 30 VDC 22 to 30 VDC Discharge Time Constant 0.07 to 0.15 sec 0.07 to 0.15 sec Spectral Noise (1 Hz) 107 µg/√Hz 1050 (µm/sec2 /√Hz Spectral Noise (10 Hz) 58 µg/√Hz 570 (µm/sec2 /√Hz Spectral Noise (100 Hz) 41 µg/√Hz 400 (µm/sec2 /√Hz Spectral Noise (1000 Hz) 9.8 µg/√Hz 96 (µm/sec2 /√Hz Output Bias Voltage 10 to 15 VDC 10 to 15 VDC [2]
Supplied Accessory: Model ACS-68 Single Axis Amplitude Response Calibration from 5 Hz to upper 5% plotted on dB scale replaces Model ACS-1
J - Ground Isolated Frequency Range (5 %) 9 kHz 9 kHz Frequency Range (10 %) 14 kHz 14 kHz Resonant Frequency ≥40 kHz ≥40 kHz Electrical Isolation (Base) >108 Ohm >108 Ohm Size (Hex x Height) 0.44 in x 0.67 in 11.2 mm x 17.0
mm
Weight 0.21 oz 6.0 gm
T - TEDS Capable of Digital Memory and Communication Compliant with IEEE P1451.4
TLA - TEDS LMS International - Free Format TLB - TEDS LMS International - Automotive Format TLC - TEDS LMS International - Aeronautical Format TLD - TEDS Capable of Digital Memory and Communication Compliant with IEEE 1451.4
Temperature Range -10 to +200 °F -23 to +93 °C Excitation Voltage 20 to 30 VDC 20 to 30 VDC Output Bias Voltage 7.5 to 13 VDC 7.5 to 13 VDC
W - Water Resistant Cable Electrical Connector Sealed Integral
Cable Sealed Integral
Cable
Electrical Connection Position Side Side
Notes
[1] Typical. [2] TEDS option adds 1.0 VDC to bias voltage. [3] 200°F to 325°F data valid with HT option only. [4] Zero-based, least-squares, straight line method. [5] Transverse sensitivity is typically <= 3%. [6] See PCB Declaration of Conformance PS023 for details.
Supplied Accessories 080A Adhesive Mounting Base (1) 080A109 Petro Wax (1) 081B05 Mounting Stud (10-32 to 10-32) (1) ACS-1 NIST traceable frequency response (10 Hz to upper 5% point). (1) M081B05 Mounting Stud 10-32 to M6 X 0.75 (1)
Entered: BLS Engineer: BAM Sales: WDC Approved: BLS Spec Number: Date: 04/15/2008
Date: 04/15/2008
Date: 04/15/2008
Date: 04/15/2008
13118
3425 Walden Avenue Depew, NY 14043 UNITED STATES Phone: 800-828-8840 Fax: 716-684-0987 E-mail: [email protected] Web site: www.pcb.com
5/3/13 RULAND MANUFACTURING Coupling, One Piece, Bore Dia 1/2 In - Rigid Couplings - 2AMG7|CLX-8-8-F - Grainger Industrial Supply
www.grainger.com/Grainger/wwg/search.shtml?searchQuery=2AMG7&op=search&Ntt=2AMG7&N=0&GlobalSearch=true&sst=subset 1/2
| Write a Review | Read all Reviews | Read all Ask & Answer Share This Product
Qty: ZIP code:
Tech
Specs
Additional
Information
Compliance
& Restrictions
Required
Accessories
Optional
Accessories
Alternate
Products
Repair
Parts
• Shaft Couplings (1564) • Rigid Type Couplings (393) • Set Screw Couplings (360)
Other Popular Terms for this Product
Check Availability Use your ZIP code to estimate availability.
Category Top Sellers
Coupling, One Piece, Bore
Dia 5/8 In
Brand: RULAND
MANUFACTURING
Grainger Item #: 2ALN1
Price: $102.35
Qty
Coupling, Rigid Steel
Brand: DAYTON
Grainger Item #: 3ZN69
Price: $72.45
Qty
Coupling, Rigid Steel
Brand: DAYTON
Grainger Item #: 6L015
Price: $12.26
Qty
Coupling, Two Piece, Bore
Dia 2 In
Brand: RULAND
MANUFACTURING
Grainger Item #: 2APP9
Price: $332.00
Qty
Power Transmission > Couplings, Collars, and Adapters > Rigid Couplings
RULAND MANUFACTURING Coupling, One Piece, Bore Dia1/2 In
Rigid Shaft Coupling, One Piece Clamp Type, Without Keyway, Bore Dia 1/2 In, Overall Length 1 3/4 In, Outside Dia 1 1/8 In,Clearance Dia 1.328 In, Screw Size #8-32 In, Max Torque 950 In-Lb, Black Oxide Steel
Grainger Item # 2AMG7
Price (ea.) $42.50
Brand RULAND MANUFACTURING
Mfr. Model # CLX-8-8-F
UNSPSC # 31162811
Ship Qty. 1
Sell Qty. (Will-Call) 1
Ship Weight (lbs.) 0.37
Availability Typically in Stock
Catalog Page No. 179
Country of Origin
(Country of Origin is subject to change.)USA
Qty.
Price shown may not reflect your price. Sign in or register.
Enlarge Image
MSDS
Item Rigid Shaft Coupling
Type One Piece Clamp Type, Without Keyw ay
Bore Dia. 1/2"
Overall Length 1-3/4"
Outside Dia. 1-1/8"
Clearance Dia. (In.) 1.328
Screw Size (In.) #8-32
Max. Torque (In.-Lbs.) 950
Material Black Oxide Steel
Category Top Sellers
Brand:
Grainger Item #: 3ZN61
Price: $66.40
Qty
Coupling, Rigid Steel
DAYTON Brand:
Grainger Item #: 2ALG7
Price: $129.40
Qty
Coupling, One Piece, Bore
Dia 5/8 In
RULAND
MANUFACTURING
Brand:
Grainger Item #: 2APZ8
Price: $109.20
Qty
Coupling, Two Piece, Bore
Dia 1 x 3/4 In
RULAND
MANUFACTURING
Brand:
Grainger Item #: 2AEK5
Price: $43.00
Qty
Coupling, Set Screw Type,
Bore 1/2 In
RULAND
MANUFACTURING
Brand:
Grainger Item #: 15V710
Price: $78.85
Qty
Shaft Coupling, Round
Bore, Dia. 1-3/8 In
HUB CITY
Sign In | Email Sign Up | New Customer? Register Now | | Help
Catalog | Find a Branch | Cart Contains: (0) Items
Enter keyword or part number PRODUCTS RESOURCES SERVICES WORLDWIDE REPAIR PARTS
1 of 5
5/3/13 RULAND MANUFACTURING Coupling, One Piece, Bore Dia 1/2 In - Rigid Couplings - 2AMG7|CLX-8-8-F - Grainger Industrial Supply
www.grainger.com/Grainger/wwg/search.shtml?searchQuery=2AMG7&op=search&Ntt=2AMG7&N=0&GlobalSearch=true&sst=subset 2/2
Read Reviews Write Reviews Ask And Answer
Product Reviews Disclaimer:Grainger is neither responsible f or, nor does it endorse, the content of any product rev iew or statement posted. Any statements posted constitute the statements of the poster and are
not the statements of Grainger. The statements posted by Grainger employ ees with the Grainger employ ee badge represent the v iews of such employ ees and are not the statements of
Grainger. Grainger makes no representations as to the appropriateness, accuracy , completeness, correctness, currentness, suitability , or v alidity of any product rev iew or statements
posted, including those posted by employ ees with the Grainger employ ee badge, and is not liable f or any losses, injuries or damages which may result f rom any such product rev iew or
statements. Use of any linked web site prov ided in a product rev iew or post is at the user's own risk.
This Product has no Reviews. Be the first to Write a Review.
View Catalog Page View Printable Page
Return To Top
Customer Service
Catalog Request
Contact Us
Feedback
Find a Branch
Questions? Call us
1-800-Grainger
Order Support
Bulk Order Pad
Order History
Order Status
Returns
Site Features
Will Call
Company Information
About Us
Careers
Corporate Social Responsibility
Diversity
Investor Relations
Press Room
Supplier Overview
Sustainability
Technical Education
Worldw ide
Online Resources
Clearance Center
Exclusive Brands
Hot Buys
Rebates
Today's Features
Webinars
Services
Auto-Reorder
Emergency Services
Grainger Lighting Services
Grainger Online SafetyManager℠
Grainger TripleGuard®
Inventory Management
Online Purchasing Solutions
Paperless Invoicing
Products Beyond the Catalog®
Email Sign Up
Get industry new s,
new product information,
helpful tips and more.
Connect With Us
Home | Terms of Access | Terms of Sale | Return Policy | Privacy Policy (Rev. October, 2012) | About our Ads | Sitemap
© 1994 - 2013 W.W. Grainger, Inc. All rights reserved.
5/7/13 1 Ton Arbor Press & Other Arbor Presses - Harbor Freight Tools
www.harborfreight.com/1-ton-arbor-press-3552.html 1/1
1-ton arbor press handles your smaller heavy-duty production
and assembly work
1 ADD TO CARTADD TO CART
FIND STOREFIND STORE
SEARCH Enter Zip Code FIND STORE