3 CALL 1-888-POSNERS€¦ · Wrought Iron Castings 16 Pipe Flanges 59 Cast Iron Castings 17 Steel Spheres 60 Cast Iron Ornamental Castings 19 Fored Steel Baskets 60 Wrought Iron Stamped

WWW.POSNERS.COM 3 CALL 1-888-POSNERS


Cast Iron Balls 6 Cast Steel Shoes 52Post Caps 7 Steel Weld Tabs 53Cast Iron Collars 8 Welded Steel Pipe Caps 55Cast Iron Plugs 8 Base Plates 55Cast Iron Spears & Finials 9 Forged Steel, Cast Iron Tubing Rings 56Plastic Spears & Finials 14 Weldable Steel Elbow 57Cast Iron Rosettes and Medallions 15 Screws 58Wrought Iron Castings 16 Pipe Flanges 59Cast Iron Castings 17 Steel Spheres 60Cast Iron Ornamental Castings 19 Fored Steel Baskets 60Wrought Iron Stamped Leaves 21 Hinges 61Steel Rosettes 22 Hasps 66Cast Iron Corinthian 23 Lock Boxes 67Wrought Iron Bars 24 Door Locks & Accessories 68Wrought Iron Newel Post 24 Deadbolt Locks 68Balusters 26 Rolling Hardware 69Handrail 31 Aluminum Storm Door Castings 70Handrail Brackets 35 Aluminum Picket Castings 72Cast Iron Rail Ends 36 Aluminum Post Balls 77Speed Rail 39 Aluminum Handrail Brackets 77Speed Rail Accessories 48 Aluminum End Caps 78Bar Hammered Square 49 Aluminum Post Caps 78Pressed Picket 49 Aluminum Hinges 79Cast Iron Shoes 50 Aluminum Shoes 79

Table of Contents


Notes

Cast Iron Post BallItem # Height Base Ball Diameter

PI224-1 2-3/4” 1” 1-5/16”PI224-125 2-1/2” 1-1/4” 1-1/2”PI224-150 2-3/16” 1-1/2” 1-1/2”

Cast Iron Post BallItem # Fits Over Height Base Ball Diameter

PI116 1” 2-1/4” 1-1/4” 7/8”PI114 1-1/4” 2-1/2” 1-1/2” 1-1/8”PI112 1-1/2” 2-3/4” 1-3/4” 1-3/8”PI118 2” 3-3/4” 2-3/8” 1-3/4”PI121 2-1/2” 4-1/8” 3” 2”PI120 3” 5” 3-1/2” 2-1/2”PI119 4” 5-1/2” 4-1/2” 3”PI126 6” 7-1/2” 6-1/2” 4”


Cast Iron Post BallItem # Height Base Ball Diameter

PI9536 3-1/8” 1-3/4” 2-1/4”PI9537 4” 2-1/4” 2-7/8”PI224-150 5-1/4” 2-7/8” 3/11/16”

Cast Iron Post Balls

Cast Iron Post CapsItem # Fits Over Height

PI142 1-1/2” 1-1/8”PI143 2” 1-1/8”PI147 2-1/2” 1-3/8”PI144 3” 1-1/2”PI145 4” 1-3/8”PI149 6” 1-3/4”

Plastic Tubing PlugsItem # Size Gauge

PI35-12-6 1/2” 16PI34-34-1 3/4” 11PI20-075-16 3/4” 16PI20-125-11 1-1/4” 11PI20-125-16 1-1/4” 16PI20-100-11 1” 11PI20-100-16 1” 16PI20-150-11 1-1/2” 11PI20-150-14 1-1/2” 14PI20-200-11 2” 11PI20-200-14 2” 14


Steel Pressed Post CapsItem # Fits Over Height

PI151 1” 1/2”PI152 1-1/4” 1”PI153 1-1/2” 3/4”PI154 2” 1”PI155 2-1/2” 1”PI156 3” 1-1/16”PI157* 4” 1-5/8”

Post Caps

*Available in galvanized steel

Cast Iron CollarItem # Fits Over Height Diameter

PI8518 1/2” Square 1-3/4” 1-7/8”

Cast Iron Square CollarsItem # Fits Over Height Width

PI251-1/2 1/2” Square 1-3/4” 1-1/2PI251-5/8 5/8” Square 1-3/4” 1-3/4”PI251-3/4 3/4” Square 1-3/4” 1-7/8”PI251-1 1” Square 2-1/2” 2-1/2”

Cast Iron Collars

Cast Iron Plugs

Cast Iron PlugItem # Fits Height (In.)PI413 1” Square Tubing 13/16


Cast Iron Spears & Finials

Cast Iron Spear PineappleItem # Fits Over Width Height

PI810 1” Square 1-1/2” 3”PI812 1/2” Square 1” 2”PI834 3/4” Square 1-3/8” 2-1/2”

Cast Iron PineappleItem # Base Height

PI657 1-3/4” Round 4-1/4”

Cast Iron Spear UrnItem # Height Width

PI219 3-7/8” 1-1/4”

Cast Iron PineappleItem # Base Height

PI657-L 4” Round 8-1/2”



Quad Finial with Square BaseItem # Fits Over Height Base WidthPI2171/2 1/2” Square 4-1/4” 1”PI2175/8 5/8” Square 4-1/4” 1”

Budded Fleur-de-list FinialItem # Fits Over Height Width Base WidthPI2271/2 1/2” Square 4-7/8” 3-1/8” 1”PI2275/8 5/8” Square 4-7/8” 3” 1”

Cast Iron Spear UrnItem # Height Width

PI8-X 3” 1” Square


* Special order

Banana PeelItem # Fits Over Height Width Base WidthPI2181/2 1/2” Square 4-1/2” 2-3/8” 1”PI2185/8* 5/8” Square 4” 2-3/8” 1”PI2183/4* 3/4” Square 4” 2-3/8” 1-1/8”

Cast Iron FinialItem # Fits Over Height Width DiameterPI6914 1/2” Round 4-1/8” 1-3/4” 13/16”

Cast Iron FinialItem # Fits Over Height Width Base WidthPI649-H 5/8” Square 4-1/2” 2-1/4” 1-1/4”PI649-Y 3/4” Square 5-1/2” 2-3/4” 1-1/4”PI649-Z 1” Square 7-7/8 2-1/8 1-3/4



Emerging Fleur-de-lis FinialItem # Fits Over Height Width Base WidthPI2151/2 1/2” Square 4-1/4” 1-7/8” 1”PI2155/8 5/8” Square 4” 2” 1”PI2153/4 3/4” Square 4” 2” 1-1/8”

Cast Iron SpearItem # Fits Over Height Width Base WidthPI671-3/4 3/4” 5-1/8” 1-5/8” 1-3/8”PI671-1 1” 8” 2-1/4” 1-5/8”


Quad Finial with Square BaseItem # Fits Over Height Width Base WidthPI9-H 5/8” Square 4-5/8” 1-1/4” 1-3/16PI9-Y 3/4” Square 5-3/4” 1-7/8” 1-1/4PI9-Z 1” Square 4-5/8” 1-1/2” 1-3/4”


* Special order

* Special order

Quad Finial with BallItem # Fits Over Height Width Base WidthPI217WB1/2 1/2” Square 4-1/4” 1” 1”PI217WB5/8 5/8” Square 4-1/4” 1” 1”PI217WB3/4 3/4” Square 4-1/4” 1-1/8” 1-3/8”


Fleur-de-lis Finial with Round BaseItem # Fits Over Height Width Base Width RoundPI853-H 5/8” 5-1/2” 3” 1-3/4PI835* 1/2” 4-5/8” 2-1/2” 1”PI835-34* 3/4” 6-5/8” 3-3/4” 2”

Traditional Fleur-de-lis SpearItem # Fits Over Height Width BasePI8832-5/8 5/8” 5-1/4” 3-1/4” 1-1/8”*PI8832-12 1/2” 5-1/4” 3-1/8” 1-1/16”*PI8832-34 3/4” 5-1/4” 3-1/8” 1-1/4”


Plastic Triad FinialItem # Fits Over Height

PI200-1/2 1/2” Square 4-1/2”


Cast Iron SpearItem # Fits Over Height

PI260-1/2 1/2” 4-3/4”

Plastic Finials


Wrought Iron RosettesItem # Diameter Thickness Notes

PI17-1 9-3/16” 5/16” Double faced

Cast Iron RosettesItem # Diameter Thickness Notes

PI681 3-3/4” 7/16” Single faced

Cast Iron RosettesItem # Diameter Thickness Notes

PI9052 2-5/8” 1/4” Single faced

Cast Iron Rosettes & Medallions


C-ScrollsItem # Height WidthPI634-8 6-5/16” 8-7/8”PI80-A10 5-1/2” 3-3/4”PI80-A9 4-1/16” 2-3/4”PI84-7 8-7/8” 5-15/16”

S-ScrollsItem # Height WidthPI80-A1 1/2” 1/4PI80-A11 5-7/8” 2-9/16”PI80-A12 7-1/2” 2-3/4”

Wrought Iron Castings

C-Scroll with LeavesItem # Height Width

92-B-4 9-7/8” 6-5/16”


*Available in aluminum

Cast Iron Castilian Gate TopperItem # Width HeightPI680-CI 22-1/2” 10-5/8”

Cast Iron Bird of Paradise DesignItem # Height Width

PICL82* 23” 8-1/2”

Cast Iron Bird of Paradise DesignItem # Height Width

PICL81 15-1/4” 8-3/8”

Cast Iron Castings

Wrought Iron Castings


Cast Iron CastingsItem # Height WidthPI1014-CI 15-1/2” 14-3/4”

Cast Iron Rose DesignItem # Height Width PI7124-CI 28-1/2” 8-1/2”


Cast Iron Castings


Cast Iron CastingItem # Fits Height Width

PI6711 1/2” Pickets 13-1/2” 7-1/4”


PI6701 1/2” Pickets 14-1/8” 6-1/2”


PI6702 1/2” Pickets 14-7/8” 7-5/8”

Cast Iron Ornamental Castings



PI6717 1/2” Pickets 17-7/8” 7-1/2”


PI6714 1/2” Pickets 17-7/8” 7-1/2”


PI6716 1/2” Pickets 13-1/4” 6-3/4”

Cast Iron Ornamental Castings

Metal Art Stamped LeafItem # Height Width

PI136-3 2-3/4” 6-1/4”

Metal Art Stamped LeafItem # Height Width External Diameter

PI138-13 7-5/8” 7-1/2” 2-3/8”

Wrought Iron Stamped Leaves

Metal Art Stamped LeafItem # Height Width

PI136-4 2-3/4” 6-1/4”


Stamped Steel RosetteItem # Diameter Thickness Notes

PI5956 2-5/8” .020” Single faced

Forged Steel RosetteItem # Fits Over Diameter Height

PI13-02016051 3/4” Round 4-15/16" 3/16”

Steel Rosettes


Cast Iron PostItem # Height Top Width Base Width

PI6000-CI 27-5/8” 5-1/4” 6-1/2”

Cast Iron Post CapItem # Height WidthPI657P 7” 3-3/8”

Cast IronCorinthian


Wrought Iron Hammered NewelItem # Fits Height Notes

PI112-7 1” Square 47” Sphere Hammered

Wrought Iron Bars

Twisted SquareItem # Fits Length

PI11-12T 1/2” Square 20”PI11-58365 5/8” Square 35-1/2”PI11-1242 1/2” Square 42”

Wrought Iron Newel Post


Wrought Iron Twisted NewelsItem # Height Fits Notes

PI113-1 43-1/4” 3/4” Basket TwistPI113-2 43-1/4” 1-3/16” Basket Twist

Wrought Iron Twisted NewelItem # Height Fits Notes

PI113-5 43-1/4” 3/4” Stamped Twist

Wrought Iron Newel Post


Wrought Iron Hammered BalusterItem # Picket Width Height

PI109-3 3/4” 1-1/8” 39-1/2”

Wrought Iron Tubular BalusterItem # Height External Diameter Diameter

PI148-1 35-7/16” 1-1/8” 1-3/16”

Balusters


Wrought Iron Tubular BalusterItem # Diameter Height Notes

PI148-2 1-3/16” 35-7/16” Double Bushing Design

Balusters


Wrought Iron Twisted BalusterItem # Fits Height NotesPI48-1 1/2” Square 35-7/16” Double Basket

Wrought Iron Twisted BalusterItem # Fits Height NotesPI48-2 1/2” Square 35-7/16” Single Basket

Wrought Iron Twisted BalusterItem # Fits Height WidthPI50-5 1/2” Square 35-7/16” 1-3/16”

Balusters

Wrought Iron Twisted BalusterItem # Fits Height NotesPI50-7 1/2” Square 35-7/16” Samped scroll, features a

two-twist design

Wrought Iron Twisted BalusterItem # Fits Height WidthPI50-8 1/2” Square 35-7/16” 5-1/2”

Wrought Iron Twisted BalusterItem # Fits Height NotesPI50-6 1/2” Square 35-7/16” Double Twist


Wrought Iron Art Deco BalusterItem # Fits Height Notes

PI70-D1 9/16” Square 35-7/17” Wavy Design

Wrought Iron Hammered BalusterItem # Diameter Height NotesPI98-1 1” Picket 39-3/8” Taper Design

Wrought Iron Balcony PicketItem # Fits Height Width

PI64-H10 9/16” Square 35-7/16” 1-3/16”

Balusters


Wrought Iron Scroll BalusterItem # Height Width Notes

PI52-1* 34-1/4” 13-3/4” Leaf Design

Balusters

Wrought Iron Ornate ScrollItem # Height Width Notes

PI541-2* 35-7/16” 13-1/2” S-Scroll Design

Wrought Iron Ornate ScrollItem # Height Width NotesPI62-1 28-3/8” 9-1/4” S-Scroll Design

*Complementary C-Scroll item # PI634-8 (page 16)

*Complementary Stamped Leaf item # PI136-3 and # PI136-4 (page 21)


Top Rail MouldingItem # Length NotesTB100 20’ Fits 1” channel or 1/2”

squareTB150 19’ Fits 1-1/4” or 1-1/2”

channel

Handrail

Molded Steel HandrailItem # Length Width ThicknessPI114-2 8’ 2-1/4” 5/8”

Forged Steel Etched Vine Design HandrailItem # Length Width ThicknessPI114-5 8’ 1-9/16” 5/16”

Forged Steel Scallop Edge HandrailItem # Length Width ThicknessPI114-8 8’ 1-9/16” 5/16”PI114-9 10’ 1-3/16” 5/16”


Handrail

Forged Steel Lamb’s ToungeItem # Height Width

PI115-2 11-7/16” 2-1/4”

Forged Steel Vine Design VoluteItem # Height Width

PI116-10* 10-13/16” 1-9/16”

Forged Steel VoluteItem # Height Width

PI812-12 6-5/16” 11-1/4”

*Lambs Tongue for item # PI114-5 (page 33)


Handrail

Channel LateralItem # Fits Height Width Iron Type

PI1CL-L 1” x 1/2” Channel 5-7/8” 6” Cast IronPI1CL-R 1” x 1/2” Channel 5-7/8” 6” Cast Iron

Molded LateralItem # Fits Height Width Iron Type

PI1LS-L 1” x 1/2” Channel 6-3/8” 6-7/8” Cast Iron

PI1LS-R 1” x 1/2” Channel 6-3/8” 6-7/8” Cast Iron


Handrail

Channel LateralItem # Fits Height Width Iron Type

PI401-R 1-3/4” Cap Rail 10-1/2” 12-1/4” Malleable IronPI401-L 1-3/4” Cap Rail 10-1/2” 12-1/4” Malleable Iron

Molded LateralItem # Fits Height Width Iron Type

PI400-R 1-3/4” Cap Rail 10” 12” Malleable IronPI400-L 1-3/4” Cap Rail 10” 12” Malleable Iron


Cast Iron Round Handrail BracketsItem # Height Width Hole Size NotesPI93R 2-3/4” 2-1/2” 3/8” For Round

Tubing, Extends 2-1/4” from wall

Cast Iron Flat Handrail BracketsItem # Height Width Hole Size NotesPI3-A 2-3/4” 2-1/2” 3/8” Extends 2-1/2”

from wall

Handrail Brackets

Steel Handrail BracketsItem # Height Width Hole Size NotesPI3-S 3-1/4” 2-3/4” 3/8” Extends 3” from

wall


Cast Iron FlangeItem # Height Width FitsPI654 1-1/32” 2-5/16” 1-5/8” & 1-3/4”

Molded or Tubular Handrail

Cast Iron BracketItem # Height Width FitsPI653 15/16” 1-1/2” 1” x 1/2”

Cast Iron Rail Ends


Molded Volute Rail EndItem # Fits Length Height

PI201 1-3/4” Cap Rail 4” 2-5/8”PI201XL 2-1/4” Cap Rail 4-3/4” 2-5/8”

Molded Lambs Tounge Rail EndItem # Fits Length

PI6928 1-3/4” Cap Rail 5-1/2”PI6928XL 2-1/4” Cap Rail 5-3/8”

All Purpose Lambs Tounge Rail EndItem # Fits Length

PI5-LT 1-3/4” Cap Rail 5-3/4”

All Purpose Lambs Tounge Rail EndItem # Fits LengthPI5-A 1” x 1/2” x 1/8

Channel4-1/2”

Cast Iron Rail Ends


Cast Iron Rail Ends

All Purpose Lambs Tounge Rail EndItem # Fits Length

PI199XL 2-1/4” Cap Rail 5”


Speed Rail


Photos by Hollaender

Speed RailItem # Size Notes

07060 1-1/4” #5E Tee-E


08040 1-1/2” #5 Tee


08230 1-1/2” #17 Adjustable Elbow


08330 1-1/2” #19 Adjustble Cross

Speed Rail



Speed RailItem # Size Hole Size Notes

27090 1-1/4” (4) 7/16” #42 Round Base Flange


27130 1-1/4” (4) 7/16” #45 Square Base Flange

Speed RailItem # Size Slot Size Notes

27140 1-1/4” 9/16” x 13/16” #46 Base Flange28140 1-1/2” 9/16” x 13/16” #46 Base Flange

Speed RailItem # Size Slot Size Notes

27150 1-1/4” 9/16” x 13/16” #46 Adjustable Flange

Speed Rail




27280 1-1/4” (3) 7/16” #50 Wall Mount Flange


27360 1-1/4” (2) 3/8” #55 Offset Support Bracket


28050 1-1/2” (3) 7/16” #41 Adjustable Flange (Wall Mount Only)


H07020 1-1/4” #3 Elbow8020 1-1/2” #3 Elbow

Speed Rail




7030 1-1/4” #3AE Adjustable Elbow


7040 1-1/4” #5 Tee8040 1-1/2” #5 Tee


7090 1-1/4” #7 Cross8090 1-1/2” #7 Cross


H07080 1-1/4” #6 Angle Tee(45 Degrees)

Speed Rail




7120 1-1/4” #9 Side Outlet8120 1-1/2” #9 Side Outlet


7150 1-1/4” #11E Side Outlet Tee-E


7160 1-1/4” #12 Short Barrel Cross


7170 1-1/4” #13 Side Outlet Cross

Speed Rail




H07230 1-1/4” #17 Adjustable Elbow


7270 1-1/4” #17F Adjustable Elbow


7330 1-1/4” #19 Adjustable Cross Assembly


7370 1-1/4” #21-45 Adjustable Cross (30-45 Degrees)

Speed Rail




7400 1-1/4” #23 Adjustable Tee or Cross


7630 1-1/4” #70 External Coupling

8630 1-1/2” #70 ExternalCoupling


8110 1-1/2” #5 ExtendedBarrel Tee


H07140 1-1/4” #11 Side OutletTee

8140 1-1/2” #11 Side OutletTee

Speed Rail




8240 1-1/2” #17E Adjustable Elbow


H07100 1-1/4” #7E Cross-E


H07220 1-1/4” #16 Bolt-On Tee


H07250 1-1/4” #17EM Adjust-able Elbow

Speed Rail




H07420 1-1/4” #25 Side OutletAdjustable Elbow or Tee


H07900 1-1/4” #84AL Handrail Return

H07910 1-1/4” #84AR Handrail Return

Speed RailAccessories

Speed Rail PlugItem # Size Notes

7610 1-1/4” #62 Mach. Plug Sch. 40 (OD PIPE)

H07600 1-1/4” #60 Mach. Plug Sch. 40 (OD FITTING)

Speed Rail PlugItem # Size Notes

H07640 1-1/4” #70E Internal Coupling (Friction Fit)



Bar Hammered Square

Wrought Iron Bar Hammered SquareItem # SizePI118-1 1/2” x 20’

Pressed Picket

Pressed Picket BareItem # Height WidthPI58-72PP 72” 5/8”


Cast Iron ShoesItem # Fits Over Height Width w/ Ears Depth

PI70-EE 9/16” 13/16” 1-1/16” 2-3/8”PI70-MM 1” 1-3/8” 1-5/8” 3-5/8”

Cast Iron ShoesItem # Fits Over Height Width

PI70-AA 1/2” PI70-AA-34 3/4”

Cast Iron ShoeItem # Fits Over Height Width Depth

PI70-LL 1” 1-3/8” 1-13/16” 2-13/16”

Cast Iron Shoes

Cast Iron ShoeItem # Fits Over Height Width Depth

PI70-DD 1” 1-7/8” 2” 2”


* Special order

Cast Iron Shoes

Cast Iron ShoesItem # Fits Fits Height Width

PICSH100 1” Sq. Tubing 3” Base Plate 1-7/8 3-3/8PICSH150 1-1/2” Sq. TubingPICSH200* 2” Sq. Tubing

Cast Iron Shoe - Flanged ShoeItem # Fits Collar Base Top

PI70-CC 1” Sq. Tubing 2” Deep 3-1/4” x 3-1/4” 1-5/16” x 1-5/16”

Cast Iron Shoe - Flanged ShoeItem # Fits Collar Base Top

PI70-CC 1-1/2” Sq. Tubing 2” Deep 3-3/4” x 3-3/4” 1-7/8” x 1-7/8”

Cast Iron Shoe CoverItem # Fits Width Height

PI70-CC 2” Square, 4” Base Plate 4-5/8” 2”


Stamped Steel Flat Square FlangeItem # Fits Over Height WidthPI70-100-S 1” 3/4” 4”PI70-125-S 1-1/4” 3/4” 4”PI70-150-S 1-1/2” 3/4” 4”PI70-200-S 2” 3/4” 5-1/4”

Cast Steel Shoes

Cut Steel Three Tier Square ShoesItem # Fits Over Height WidthPI819-8 1/2” Square 5/16” 1-1/2”PI819-2S 1” Square 3/4” 3”


Steel Weld Tabs

Steel Weld TabsItem # Height Width Thickness Hole Dia

PIWT-107 2-7/8” 2-5/8” 3/16” 3/8”

Steel Weld TabsItem # Height Width (In.) Thickness (In.) Hole Diameter

PIWT-103 2 1/8 1 3/8”PIWT-106 3-3/8” 2” 1/8” 3/8”

Steel Weld TabsItem # Height Width Thickness Hole Diameter

PIWT-102 2-3/8” 1” 1/8” 3/8”


PIWT-101 1-1/2” 1” 1/8” 3/8”



PIWT-104 1-1/2” 1” 1/8” 3/8”PIWT-104S 1-1/2” 1-1/2” 3/16” 3/8”

Steel Weld Tabs


PIWT-107 3-1/2” 1-1/2” 3/16” 3/8”


PIWT-108 3-1/4” 1” 1/8” 3/8”


PIWT-105 2-3/4” 2-5/8” 1/8” 3/8”


Welded Steel Pipe Caps

Steel Weld CapsItem # Outer Diameter Height Fits Thickness

PI3218-C 1” 5/8” 1” 10 GagePI3219-C 1-1/4” 7/8” 1-1/4” 10 GagePI3220-C 1-1/2” 7/8” 1-1/2” 10 GagePI3221-C 2” 1-1/4” 2” 10 GagePI3222-C 2.875” 1-1/4” 2-1/2” 10 Gage

PI3225-350 4” 1-1/2” 3-1/2” 10 GagePI3225-4 4-1/2” 1-5/8” 4” 10 GagePI3225-6 6-5/8” 2-1/2” 6” 10 GagePI3225-8 8-5/8” 4” 8” 10 Gage

Base Plates

Steel Base PlatesItem # Size Thickness Hole Diameter

PIWT-113 3” Square 3/16” 3/8”PIWT-114 4” Square 3/16” 3/8”PIWT-116 6” Square 1/4” 7/16”PIWT-118 8” Square 1/4” 7/16”


Forged Steel, Cast Iron Tubing Rings

Square TubingItem # Diameter

PI60-350 3-1/2”PI60-400 4”PI60-450 4-1/2”PI60-500 5”PI60-600 6”PI62-1000 10”

Round Bar Cast Iron RingItem # Diameter

PI81-229 3”

Forged Steel Round Bar RingItem # Diameter

PI13-31013-356 5”


Elbow Welds - SteelInside Diameter 90 Degrees 45 Degrees 30 Degrees

3/4” PI075-90

1 PI100-90 PI100-45

1-1/4 PI125-90* PI125-45 PI125-30

1-1/2 PI150-90* PI150-45

2 PI200-90 PI200-45

3 PI250-90

4 PI400-90*

90 degree angle

45 degree angle

Weldable Steel Elbows



Screws

One-Way Lag Screws

Item # Height Width

LOW25N150 1/4” 1-1/2”

LOW31N150 5/16” 1-1/2”

LOW31N2 5/16” 2”

LOW31N3 5/16” 3”

LOW31N4 5/16” 4”


Steel Pipe Flanges

Item # Pipe Size

PI628 1-1/4”

PI636 1-1/2”

PI644 2”

Welding Connectors

Item # Pipe Size

PI1013 1”

PI1023 1-1/4”

PI1033 1-1/2”

PI1043 2”

Pipe Flanges



Forged Steel Basket with Plain Square Bar FilamentsItem # Height Width Fits

PI159-3 4-15/16” 2-3/8” 1/2”

Forged Steel Baskets

Hot-Stamped Steel Smooth TextureItem # Diameter

PI116-F2 1”PI116-F3 1-3/16”PI116-F4 1-9/16”PI116-F5 1-15/16”

Hollow Steel SpheresItem # Diameter

PI80-2-S 2”PI80-3-S 3”PI80-4-S 4”PI80-5-S 5”PI80-6-S 6”

Steel Spheres

Hinges

Stainless Steel Piano HingesItem # Width Length

STS311-100 1” 72”

STS311-150 1-1/2” 72”

STS314-1/4 2” 72”

PH3SS 3” 72”

Aluminum Piano HingesItem # Width Length

065024-72 1-1/2” 72”

075032-72 2” 72”

PHA3X72* 3” 72”

*With 1/4” Pin

Steel Piano HingesItem # Width Length

314-150 1-1/2” 72”

314-200 2” 72”

314-250 2-1/2” 72”

314-300 3” 72”


Hinges

Aluminum Butt HingesItem # Width Length Thickness

1808C-AL 3” 3” 0.090

1808E-AL 4” 4” 0.120

Steel Butt HingesItem # Width Length Thickness Notes

850-200 2” 2” 0.083 Standard

850-300 3” 3” 0.125 Heavy Duty

850-300S 3” 3” 0.092 Standard

850-350 3-1/2” 3-1/2” 0.097 Standard

850-400 4” 4” 0.178 Heavy Duty

850-400S 4” 4” 0.097 Standard

850-500 5” 5” 0.198 Heavy Duty

850-600 6” 6” .0198 Heavy Duty

Stainless Steel Butt HingesItem # Width Length Gauge

1808C-SS 3” 3” 11

1808E-SS 4” 4” 11

1808F-SS 5” 5” 11


Hinges

Bat Wing HingesItem # Hole Size Height Length Width Notes

PI55BW-F 1/2” 1-1/16” 1-1/2” 1” Female

PI55BW-M 1/2” 1-1/6” 1-1/2” 1” Male

Decorative HingesItem # Size Hole Size Notes

PI55DH 2-5/8” x 7” 1/4” With Brass Bushings

Female Male


Hinges


Full Mortise HingesItem # Width Length

F179-350 3-1/2” 3-1/2”F179-400 4” 4”F179-450 4-1/2” 4-1/2”FBB179-5450* 5” 4-1/2”

*Stainless Steel

Steel Barrel HingesItem # Width Length

PI55-3 5/8” 3”PI55-5 1” 5”PI55-7 1-1/4” 7”

Adjustable Barrel HingesItem # Width Length

PI55-75-ADJ 3/4” Steel J-Bolt 2-1/4”

3” Barrel Hinge 5” and 7” Barrel Hinge

Hinges


Spring HingesItem # Width Length

2060-350* 3-1/2” 3-1/2”2060-400** 4” 4”2060-450 4-1/2” 4-1/2”

*Available in Stainless Steel**Avaailable in Brass

T-HingesItem # Size Notes

908-400 4” Heavy 908-60 6” Heavy908-800 8” Heavy

Strap HingeItem # Size Notes

900-200 2” Light902-400 4” Heavy900-600 6” Light902-600 6” Heavy902-800 8” Heavy902-1200 12” Heavy

Hasps


Rotating Post Safety HaspItem # Size

911-250 2-1/2”911-350 3-1/2”911-450 4-1/2”911-600 6”

Extra Heavy Hasps - Stainless SteelItem # Size

SP941-750 7-1/2”

Adjustable Staple Safety HaspItem # Size

915-600 6”

Lock Boxes



Double Hole Lock BoxesItem # Back Set Width Hole Width

PI15-276 2-3/8” 1-5/16” 2-1/8”PI15-250 2-3/8” 1” 2-1/8”

PI13-215 2-3/8” 1-1/2” 2-1/8”

Single Hole Lock BoxesItem # Back Set Width Hole Width

PI15-176* 2-3/8” 1-5/16” 2-1/8”PI15-150* 2-3/8” 1” 2-1/8”

Door Locks & Accessories


‘E-Z’ Set LocksetItem # Notes

PIT6113 Passage, Polished Brass

‘E-Z’ Set LocksetItem # Notes

PIT6333 Keyed Entry

Deadbolt Locks

Polished Brass Deadbolt LocksItem # Notes

PIDC-3 Double Cylinder Door Lock w/Concealed ScrewsPIEVD2113 ‘E-Z’ Set Double Cylinder Deadbolt LockPIEVS1113 ‘E-Z’ Set Single Cylinder Deadbolt Lock


Rolling Hardware

Gate Spring RollerItem # Height Notes

PI50-9 16-3/4” 3” Swivel Caster w/ Bearing, Heavy Duty Spring

Rubber RollerItem # Size Wheel Diameter

PI65-300 3” 2-3/8”

Aluminum Casting with Steel Weld TabsItem # Height Width

PIM3 33-1/8” 10”

Aluminum Storm Door Castings

Aluminum Casting with Steel Weld TabsItem # Height Width

PIM6 33-1/4” 7-1/2”


Cast Aluminum Door Frieze with Steel Weld TabsItem # Height WidthPIM-13 5-1/4” 30-7/8”

Aluminum Storm Door Castings

Aluminum Casting with Steel Weld TabsItem # Height WidthPIM1 33-1/8” 8-1/8”


Aluminum Picket Casting with Steel Weld TabsItem # Fits Height Width

PI12 1/2” Pickets 12-5/8” 6-3/8”


PI1 1/2” Pickets 14” 6-3/8”

Aluminum Picket Castings


PI196 1/2” Pickets 6” 7-1/2”



PI03-068 1/2” Pickets 13-7/8” 7-1/2”

Contemporary Design with Steel Weld TabsItem # Height Width

PI03-023 15-3/4” 7-5/8”

Contemporary Design with Steel Weld TabsItem # Height Width Thickness

PI03-700 22-1/8” 9-1/2” 3/8”




Aluminum Picket Casting with Steel Weld TabsItem # Fits Height WidthPI03-039 1/2” Pickets 18-1/2” 6-3/4”

Aluminum Picket Casting - Grape Accents with Steel Weld TabsItem # Fits Height WidthPI23 1/2” Pickets 15-1/4” 7”

Aluminum Picket Casting - Rose Accents with Steel Weld TabsItem # Fits Height WidthPI22 1/2” Pickets 15-1/2” 6-5/16”



Aluminum Picket Casting - Oak Accents with Steel Weld TabsItem # Height Width

PI21 15” 7-1/2”


PI3 1/2” 12-7/8” 6-3/4”


PI03-038 1/2” 18” 6-1/2”




Aluminum Picket Casting with Steel Weld TabsItem # Fits Height WidthPI8 1/2” Pickets 4” 4”

Aluminum Picket Casting with Steel Weld TabsItem # Fits Height WidthPI2 1/2” Pickets 16-1/2” 7-1/8”

Aluminum Handrail Brackets

Cast Aluminum Handrail BracketsItem # Width Notes

PI3A-A 2-3/4” For Square TubingPI93R-A 2-3/4” For Round Tubing

Die Cast AluminumItem # Fits Over Height Ball DiameterPI118-A 2” Tubing 3-3/4” 3-3/4”PI120-A 3” Tubing 4-1/2” 2”

Aluminum Post Balls


Aluminum Die CastsItem # Size

PI3239-CA 1-1/4”PI3240-CA 1-1/2”

Aluminum End Caps

Square Newel Post CapsItem # Fits Over

PI142-A 1-1/2”PI143-A 2”PI144-A 3”PI145-A 4”


Aluminum Post Caps

Aluminum Butt HingesItem # Open Width Length Gauge

1808C-AL 3” 3” 11

1808E-AL 4” 4” 11

Aluminum Hinges


Aluminum ShoesItem # Fits Over Height WidthPI70-A10 1” 2-7/8” 3/4”

Aluminum ShoesItem # Fits Over NotesPI70-MM-A 1” Tubing Straight I.W.

Aluminum Shoes



CORPORATE HEADQUARTERS PO Box 5778

Capitol Heights MD 20791 (301) 350-1000 Phone

(301) 350-1051 Fax Credit Application

4600-J Wedgewood Blvd. 44180 Airport View Dr. 810 Cromwell Park Dr. 4003-C Westfax Drive 1190 International Pkwy. Frederick MD 21703 Hollywood MD 20636 Glen Burnie MD 21061 Chantilly, VA 20151 Fredericksburg VA 22406 Phone (301) 668-4450 Phone (301) 373-6390 Phone (410) 768-0300 Phone (703) 631-3313 Phone (540) 658-2754 Fax (301) 668-4454 Fax (301) 373-6394 Fax (410) 768-0301 Fax (703) 631-0175 Fax (540) 286-1122

Business Information

Business Name:_________________________________________ Line of Credit Requested: _________________

Phone: (_______) ______________________________ Fax: (_______) __________________________________

Physical Address: __________________________________ City: __________________ Zip Code: ___________

Mailing Address: ___________________________________ City: __________________ Zip Code: ___________

D/B/A: _____________________________________________ Federal Tax ID: ___________________________

Tax Exempt Numbers: Maryland___________________ Virginia_________________ DC ___________________ **Please attach copy of Exempt Certificates for MD, VA & DC if exempt in these states**

Type of Business: __________________ Date Established: _________________ Years in Business: ___________

Credit Information

Mortgage Holder/ Landlord: ____________________________________ Phone: (_____) ____________________

Address: __________________________________________ City: __________________ Zip Code: ___________

Ownership: Sole Proprietorship Partnership LLC Corporation

Principal: ____________________________________________________________________________________ (Name) (Title) (SS #) Principal: ____________________________________________________________________________________ (Name) (Title) (SS #)

Trade References

Name: _____________________________________ Phone: (_____) ____________ Fax: (_____) ____________

Name: _____________________________________ Phone: (_____) ____________ Fax: (_____) ____________

Name: _____________________________________ Phone: (_____) ___________ Fax: (_____) ____________

Bank References

Bank Name: ________________________________ Phone: (______) _____________ Fax: (_____) ____________

Address: _______________________________________ City: ____________________ Zip Code: ____________

Account No: _____________________________________ Contact: _____________________________________

Has this company or any of its principals ever filed bankruptcy? YES NO

If “Yes,” Please Explain: ________________________________________________________________________

Agreement In Consideration for the extension of credit, said business promises to pay for all purchases within the terms agreed and agrees to pay a service charge per month of 2% on all past due balances. In the event any third parties are employed to collect any outstanding balances owed by said business the undersigned agrees to pay reasonable collection costs, including attorney fees, whether or not litigation has commenced, and all costs of litigation incurred. All deliveries will be subject to a fuel charge and an additional freight charge as applicable. The undersigned represents that he/she has the authority to execute the credit agreement on behalf of the business identified. Print Name: _________________________________________ Title:_____________________________________

Signature:___________________________________________ Date:_____________________________________

CREDIT DEPARTMENT USE ONLY

Line of Credit: Approved/ Denied Amount: ______________ Date: __________ Salesperson: Initials ______ Number ____

Comments:______________________________________________________________________________________________

Have you seen our latest Steel Catalog?

Ask our team for a copy today!

Documents

3 CALL 1-888-POSNERS€¦ · Wrought Iron Castings 16 Pipe Flanges 59 Cast Iron Castings 17 Steel Spheres 60 Cast Iron Ornamental Castings 19 Fored Steel Baskets 60 Wrought Iron Stamped