2nd SC Meeting of COST-Action FP1006cost-fp1006.fh-salzburg.ac.at/fileadmin/documents/... · 26.06.2012 1 Action FP1006 Bringing new functions to wood through surface modification

26.06.2012

1

Action FP1006 Bringing new functions to wood through surface modificationAction FP1006 Bringing new functions to wood through surface modification

Kuchl, Austria April 25, 2012

2nd SC Meetingof COST-Action FP1006

25.04.2012, Kuchl, Austria



Current status of Action

26.06.2012

2



Signatures



MC members

MC Members: 44MC Substitutes:23Non-COST: 4

26.06.2012

3



Approval: new MC members, Non-COST participant

Slovakia has interest to join the COST Action FP 10 06

Because the 12 months period after CSO approval has expired for this COST Action, the request to join the Action requires the prior approval of the Management Committee

MC request for approval for: Prof. Ladislav Reinprecht, Technical University Zvolen

Non-COST Participants

MC Written Procedure approval on COST Action FP1006 started March 30, 2012 for ELAIEB Mohamed Tahar, Institut Natinal de Recherches en Génie Rural, Eaux et Forêts (INRGREF), Tunesia

Further participants? South Africa?



Current status of Action – WG members

WG Nominations:

A total of 6 representatives/party (2 MC’s, MC Substitutes, 2 Delegates/Country).

2 Members / WG Group

26.06.2012

4



WG 1: Wood surface modification and functionalizatio n

Name Country E-MailDr. Gerhard Gruell Austria HFA [email protected] WG 1 LeaderDr. Gianluca Tondi Austria Salzburg University of Applied [email protected] Lieve Taets Belgium Emulco Laboratories (Industry) [email protected]. Marc Van Leemput Belgium Belgian Institute for Wood Technology (CTIB-TCHN)[email protected]. Vjekoslav Živković Croatia Šumarski fakultet sveučilišta u Zagrebu [email protected] Mark Lawther Denmark Danish technological Institute, DTI [email protected] Thomas Mark Venås Denmark Danish technological Institute, DTI [email protected]. Riitta Julkunen-Tiitto Finland University of Eastern Finland [email protected] Anna-Kaisa Anttila Finland University of Oulu [email protected] Gilles Sèbe France University of Bordeaux, Laboratoire de Chimie des Polymères Organiques [email protected] ROUX France Pôle Ameublement, Institut Technologique [email protected]. Carsten Mai Germany University of Göttingen [email protected]. Holger Militz Germany University of Göttingen [email protected] WG 1 Vice-LeaderDr. George Mantanis Greece Tech. Edu. Inst. (TEI) of Larissa / Dept of Wood & Furniture Design and Technology [email protected]. Ioannis Arabatzis Greece NanoPhos SA Company, Lavrio [email protected]. Róbert Németh Hungary University of West Hungary [email protected]. Csilla CSIHA Hungary University of West Hungary [email protected] Sabrina Palanti Italy CNR IVALSA Laboratorio Biodegradamento e [email protected]. Elena Conti Italy CATAS s.p.a. [email protected]. Ingeborga Andersone Latvia Latvian State Institute of Wood [email protected] Waldemar Homan Netherland TNO [email protected]>Dr. Kristin Syverud Norway Paper and Fibre Research Institute [email protected]. Per Otto Flæte Norway Norwegian Institute of Wood Technology (Treteknisk)[email protected] Mazela Poland Poznan Univ. of Life Sciences (PULS) [email protected] Wojciech Grzeskowiak Poland Poznan Univ. of Life Sciences (PULS) [email protected] Bruno Esteves Portugal Instituto Politécnico de Viseu [email protected]ónia Duarte Portugal Laboratório Nacional de Engenharia Civil [email protected]. Maria Cristina Popescu Romania “Petru Poni” Institute of Macromolecular Chemistry of Romanian Academy, [email protected]. Gheorghe Dinescu Romania National Institute for Laser, Plasma and Radiation [email protected]. Dr. Marko Petrič Slovenia University of Ljubljana, Biotechnical Faculty, Department of Wood Science and [email protected] also interested in WG2Dr. Dennis Jones Sweden SP Trätek (Stockholm, Sweden) [email protected] Marion Noël Switzerland SH Biel [email protected] Arnold Switzerland EMPA [email protected] also interested in WG2+3Prof. Pavlo Bekhta Ukraine National University of Forestry & Wood Technology of Ukraine (Lviv, Ukraine)[email protected] MC Non-COST Participant

Members of WG 1 Currently 24 participating countries

from 20 countries nominations to WG 1

Currently 34 members

Bosnia & Herzegovina

Lithuania

Serbia

Spain



WG 2: Wood interface modification & interface inter actionsName Country E-MailDr. Stefanie Wieland Austria [email protected] Boris Forsthuber Austria Holzforschung Austria [email protected] lt. InternetProf. Dr. Ir. Joris Van Acker (MC) Belgium Ghent University, Laboratory of Wood [email protected]. Inge Wuijtens (substitute MC) Belgium Belgian Institute for Wood Technology (CTIB-TCHN)[email protected] Anand Sanadi Denmark Copenhagen Uni, faculty of Life [email protected] Søren Poulsen Denmark Dyrup A/S; R&D Wood care [email protected]. Mark Hughes Finland Aalto University [email protected]. Philippe GERARDIN France Nancy-Université, Faculté des Sciences et Technologies, LERMAB* – EA [email protected] Roucoules France [email protected]. Susanne Bollmus Germany Uni Göttingen [email protected]. Dr. Holger Militz Germany University of Göttingen [email protected] already WG1Dr. Marie-Pierre Laborie Germany [email protected]. Electra Papadopoulou Greece Chimar Hellas [email protected] WG 2 LeaderProf. Dr. Chrissafis Konstantinos Greece Aristotle University of Thessaloniki [email protected] Benedetto Pizzo Italy Substitue MC delegate [email protected]. Giovanni Predieri Italy [email protected] Bruno Andersons Latvia Latvia State Institute of Wood [email protected]. Kristina Ukvalbergiene Lithuania Kaunas University of Technology (Kaunas, Lithuania)[email protected] Gintaras KETURAKIS Lithuania [email protected]. Erik Larnøy Norway Norwegian Forest and Landscape [email protected] Krystofiak Poland Poznan Univ. of Life Sciences [email protected]. Piotr Beer Poland Warsaw University of Life Sciences - SGGW, [email protected] Carvalho Portugal Instituto Politécnico de Viseu [email protected] João Ferra Portugal Euroresinas - Sonae Indústria [email protected] Luisa Carvalho Portugal [email protected]ão Ferra Portugal [email protected]. Carmen Mihaela Popescu Romania “Petru Poni” Institute of Macromolecular Chemistry of Romanian Academy, [email protected]. Dr. Bogdan C. Simionescu Romania “Gh. Asachi” Techincal University of Iasi, “Gh. Asachi” Techincal University of [email protected]. Dr. Nicolae Hurduc Romania “Gh. Asachi” Techincal University of [email protected]. Ivana Gavrilovic-Grmusa Serbia University of Belgrade [email protected] [email protected] Popovic Serbia University of Belgrade, Faculty of Forestry (PhD student)[email protected]. Dr. Milan Šernek Slovenia University of Ljubljana, Biotechnical Faculty, Department of Wood Science and [email protected]. Dr. Marko Petrič Slovenia University of Ljubljana, Biotechnical Faculty, Department of Wood Science and [email protected] already WG1Dr. Thomas Volkmer SwitzerlandSH Biel [email protected] also interested in WG1+3Dr. Graham Ormondroyd UK [email protected] WG 2 Vice-Leader

Members of WG 2

Currently 24 participating countries



Bosnia & Herzegovina, Croatia,HungaryNetherlandsSwedenSpain

26.06.2012

5



WG3 – Process and Service life modellingName Country E-MailDr. Thomas Schnabel Austria FHS [email protected]. Lieven De Boever Belgium Belgian Institute for Wood Technology (CTIB-TCHN)[email protected]. Ir. Jan Van den Bulcke Belgium Ghent University, Laboratory of Wood [email protected] Niels Morsing Denmark DTI [email protected] Peter Svane Denmark industry [email protected] lt. COST Webseite, MCVeikko Möttönen Finland [email protected] Patrick Castéra France Institut de Mécanique et Ingéniérie de Bordeaux [email protected] Laurence Podgorski France FCBA [email protected]. Guido Hora Germany [email protected] WG 3 Vice LeaderMr. Karolos Markessini Greece [email protected] Mr. Miklós Bak Hungary University of West [email protected]. Dr. László Tolvaj Hungary University of West [email protected] Franco Bulian Italy MC delegate [email protected] Dr Jacub Sandak Italy Substitute MC delegate [email protected] Vitosyte Lithuania Kaunas University of [email protected]. Dr. Antanas Baltrusaitis Lithuania Kaunas University of Technology, Department of Wood [email protected]. Lone Ross Gobakken Norway Norwegian Forest and Landscape [email protected] lt. internetDr. Ulrich Hundhausen Norway Norwegian Institute of Wood Technology (Treteknisk)[email protected] lt. InternetMagdalena Nowaczyk-Organista Poland Wood Technology Institute (ITD)[email protected] Cofta Poland Poznan Univ. of Life Sciences (PULS)[email protected] Lina Nunes Portugal Laboratório Nacional de Engenharia [email protected]úlia Carmo Portugal Carmo Lda. [email protected]. Catalin Lisa Romania “Gh. Asachi” Techincal University of [email protected]. Silvia Curteanu Romania “Gh. Asachi” Techincal University of [email protected]. Milanka Djiporovic-Momcilovic Serbia University of Belgrade, Faculty of [email protected]. Mladjan Popovic Serbia University of Belgrade [email protected]. Dr. Sergej Medved Slovenia University of Ljubljana, Biotechnical Faculty, Department of Wood Science and [email protected] WG 3 LeaderEduard Correal Mòdol Spain [email protected]

Members of WG 3 Currently 24 participating countries



Bosnia & Herzegovina, Croatia,LatviaNetherlandsSwedenSwitzerlandUnited Kingdom



10

Nomination of WG members

A total of 6 representatives/party (2 MC’s, MC Substitutes, 2 Delegates/Country).

2 Members / WG Group.

Procedure of further WG Nominations: SC decided that an E-Mail will be send to those MC’s representing the countries not yet having nominated WG members to encourage them to nominate WG members.

Other possibilities?

26.06.2012

6



11

Website - Dissemination



12

Website - http://cost-fp1006.fh-salzburg.ac.at

� Comments?Member information and Equipment available in progress

� Further topics: − Description of running national projects – pending for some countries

− STSM reports – yes

− TS reports – yes

− Job announcements - yes

− List of joint publications – yes

− etc.?

26.06.2012

7



Awareness raising/ dissemination activities

� Folder � Brochure – yes

� Poster – yes

� COST FP1006 1st Year Retrospective (name to be defined) including documentation, report and pictures of STS M’s, Workshops, Training Schools, Dissemination, Activit ies, Knowledge Survey (number of joint publications, joi nt projects submitted, other joint activities etc.), etc. – will be discussed again at the end of the Action as Final Retrospective.

� Other awareness raising dissemination activities (e.g. Social Media) or technical documentations – Facebook and LinkedIn group started. FB 18 followers, LinkedIn followers increasing



FPS Annual Progress Conference

26.06.2012

8



Report on FPS APC

�In general COST FPS is facing the problem of a very low number of proposal of COST Actions in their domaine

� During the last Call for in January 2012 COST recei ved just 2% of the proposals in FPS

� Please! Submit proposals!!! Next collection date is 28 September 2012 at 17:00 Brussels time (GMT+1)



16

Support of young researchers

26.06.2012

9



17

STSM’s - Status

� 7 STSMs � various interests for 2 nd Grant period



18

Training Schools

� Two training schools conducted

26.06.2012

10



19

Further involvement

� Participation in Conferences, Workshops, etc. Best practice Kick. Off Workshop…

� ...



20

Organisation and Management

26.06.2012

11



21

Timetable and Milestones

Management: MC & SC Meetings x x x x x x x x x x x x

Event: WG meetings x x x x x x x

Workshops / Conferences x x x x

Exchange & Training: STSMs

Training schools

Milestones: 1 2

year 4Timetable

6-8 missions / year

1 school / year

Timelineyear 3year 1 year 2

MS1: first results collected, progress of the Action & achievements evaluated, mid-term report finalized (M20)MS2: final results collected & achievements evaluated, final report completed (M48)

Further important tasks will be: Assessing of the most urgent knowledge gaps and research activities completed (M6)Plans for new methods, interdisciplinary contacts defined (M12)



22

Milestones and monitoring achievements

�Definition of Success Factors to align strategy with objectives early during the first meeting of year 1 (SC Meeting)

�Success factors can be e.g.

- the number of companies invovled in the Action,- the number of papers presented demonstrating cross-group participation,

- STSMs, etc.- number of joint projects achieved,…

�review of the Action's activities and successes as part of the mid-term evaluation

26.06.2012

12



23

Coordination / interactions with other COST Actions – other international

Activities


Status?

- COST FP1006 will participate at the European Conferences of Wood Modification (ECWM, 2012 Ljubljana) with on session on Surface Modification. Dr. Dennis Jones attended the SC meeting to update on the joint activity of COST FP1006 with ECWM6. A total of 12 contributions of COST FP1006 members were accepted.

- Others?

Connection with established international conferenc es

26.06.2012

13



25

Coordination - joint activities with other COST Acti ons

- FP0904 - Thermo-Hydro-Mechanical Wood Behaviour and Processing (2009-2013)- knoweldge on wood modification and process modelling could be used from this Action (Chair: Parviz Navi):

The 1st joint event of COST Action FP1006 with FP0904 will take place after the European Conferences of Wood Modification, ECWM, September 2012, Ljubljana, Slovenia.

- further suggestions?- …



26

Future involvement of experts and additional partners that join throughout the life of the Actio n

4th year

3rd year

2nd year

COST Action‘s

1st year

Biotechnology

Nanotechnology

Automotive

26.06.2012

14



27

Future involvement of industrial partners

�Good attendance of industrialists at the 1st Workshop in Kuchl, Austria

� As also seen and discussed among the other Actions during FPS Annual Conference, to get greater industrial collaboration throughout the life of the COST Action is a difficult task.



28

Budget

26.06.2012

15



29

COST Grant budget plan for 2 nd year (based on 24 countries)

A. SUMMARY BUDGET

(1) Travel costs for meetings € 87980 (106 reimbs)

(2) Workshop organisational support € 3180

(3) Short-term scientific missions € 15000

(4) Training schools € 30 520

(5) Dissemination – publications € 2700

(6) Others € 0

TOTAL SCIENCE EXPENDITURE € 136200

B. SECRETARIAL SUPPORT

15 % of total science expenditure € 20000

C. TOTAL EXPENDITURE € 156200


COST Grant budget plan

Action no. and title: FP1006 – Bringing new function to wood through surface modification Grant period: 1 June 2012 to 31 May 2013 Allocated budget: 156200 € A. SUMMARY BUDGET (1) MEETINGS* (incl. 3180 € Workshop organization support) € 87980,- (2) SHORT-TERM SCIENTIFIC MISSIONS € ...... 15000,- (3) TRAINING SCHOOLS € ...... 30520,- (4) PUBLICATIONS, DISSEMINATION, OUTREACH € ........ 2700,- (5) OERSA € .................. B. TOTAL SCIENCE EXPENDITURE (sum of (1) to (5)) € 136200,- C. Financial & Scientific Administration and Coordination (max. of 15% of B.) € 20000,- D. TOTAL EXPENDITURE (B+C) € 156200,- *106 participants 800€/person, 30€x106 persons LOS

COST Grant budget plan

Action no. and title: FP1006 – Bringing new function to wood through surface modification Grant period: 1 June 2011 to 31 May 2012 Allocated budget: 116 800 € A. SUMMARY BUDGET (1) MEETINGS (incl. 2280 € Workshop organization support) € 60460,- (2) SHORT-TERM SCIENTIFIC MISSIONS € ...... 10000,- (3) TRAINING SCHOOLS € ...... 30520,- (4) PUBLICATIONS, DISSEMINATION, OUTREACH € .......... 620,- (5) OERSA € .................. B. TOTAL SCIENCE EXPENDITURE (sum of (1) to (5)) € 101 600,- C. Financial & Scientific Administration and Coordination (max. of 15% of B.) € 15 200,- D. TOTAL EXPENDITURE (B+C) € 116 800,-

26.06.2012

16



31

Planning of Activities of the 2nd year of Action


Training School

MC-Meeting

SC-Meeting

Workshop

WG-Meeting

Planning of the participation on the ecwm6.(Date &Place: Ljubljana ,16 - 18 September 2012

26.06.2012

17


Planning of Activities – Overview

- Dates:- September 2012 (MC, WG, SC Meeting)- March 2013 (3 rd TS)- April 2013 (Workshop, 4 th TS, MC, WG, SC Meeting)

- Activities:- 8 STSMs - 2 TS- 1 Workshop- 2 MC Meetings- 2 WG Meetings- 2 SC Meetings

- Joint Event with European Conferences of Wood Modif ication (ECWM, 2012 Ljubljana) and COST Action FP0904


Participants:

Date: March 2013

Venue: Poznan Poland

Tasks:

Number:

3rd Autumn Training School

26.06.2012

18


Lieven de Boever presented its idea for the 2nd Workshop. Detailed Programme will be presented during next MC Meeting, September 2012, Ljubljana, Slovenia.

2nd Workshop (Topic has to be chosen and confirmed)


Date: April 2013

Venue: Laboratory of Wood Technology, Ghent University, Belgium

Expectedparticipants:

approx. 80-120 persons

2nd Workshop

26.06.2012

19


Participants: Extended Managing Board

Date: September 19, 2012, Ljubljana, Slovenia

Venue:

Tasks: � STSM status

� progress report of WGs

� publications

� evaluation

� planning of future activities

� …

3rd Management Committee Meeting


Participants: Chair, Vice-Chair, WG Leaders, Action Secretary?

Date: September 19, 2012, Ljubljana, Slovenia

Venue:

Tasks: � debriefing Kick-off Workshop/Training Schools, 1st Grant Period

� STSM / Training Schools

� dissemination activities

� webpage

� further planning of the Activities of the 2nd year� …

3rd Steering Committee Meeting

26.06.2012

20



39

Joint Publications


Report from G.A. Ormondroyd:

Graham will write a report on the workshop for Wood focus, the non academic magazine

There is the possibility of having a

Special edition of the International Wood Products Journal (the journal of the WTS)

SC:

To have one edition in Spring 2013 - original papers

To have another special edition in 2014/2015 at the end of the Action –review papers

Joint Publications

26.06.2012

21


Joint publications in the frame of STSM � very important for COST

There is the possibility of having a contribution of the COST Action within the International Innovation report - Research Media Ltd - 6th of September 2012 - €2'250 Euros

Joint Publications



42

Next meetings / Events

26.06.2012

22



43

Steering Committee Meeting

Date/venue: September 18, 2012, Ljubljana, Slovenia

Management Committee Meeting, Working Group Meeting

Date/venue: September 19, 2012, Ljubljana, Slovenia

Next meetings



44

AOB

Documents

2nd SC Meeting of COST-Action FP1006cost-fp1006.fh-salzburg.ac.at/fileadmin/documents/... · 26.06.2012 1 Action FP1006 Bringing new functions to wood through surface modification