2
Model No: 28 ABSTRACT A LAND ROVER REMOTELY CONTROLLED BY HAND HELD IR TRANSMITTER This project uses a land rover robot that can move through any place by hand held remote infrared control. The body is driven by a set of 2 motors duly interfaced through motor driver IC. An infrared receiver receives IR signals from a conventional TV remote and then decodes the sent IR data duly interfaced to the microcontroller where the program while executed delivers appropriate command to the motor driver IC for its movement as desired. The PCB has a provision with another output to be driven by a transistor switch for any flashing LED. BLOCK DIAGRAM

28 Robotcotrolled With Tv Remote (Abstract)

Embed Size (px)

DESCRIPTION

abstract of the project report

Citation preview

PROJECT DEFINITION / SPECIFICATION

Model No: 28

ABSTRACT

A LAND ROVER REMOTELY CONTROLLED BY HAND HELD IR TRANSMITTERThis project uses a land rover robot that can move through any place by hand held remote infrared control. The body is driven by a set of 2 motors duly interfaced through motor driver IC. An infrared receiver receives IR signals from a conventional TV remote and then decodes the sent IR data duly interfaced to the microcontroller where the program while executed delivers appropriate command to the motor driver IC for its movement as desired. The PCB has a provision with another output to be driven by a transistor switch for any flashing LED.BLOCK DIAGRAM

SOFTWARE REQUIREMENTS:

Keil compiler, Language: Embedded C or Assembly

HARDWARE REQUIREMENTS:

Microcontroller, IR Sensors, DC motors, Motor Driver IC, wheels, Crystal Oscillator, Resistors, Capacitors, Voltage Regulator, Battery.