Upload
land-surveyor
View
222
Download
7
Tags:
Embed Size (px)
DESCRIPTION
Press (F2) for setting the tilt correction CENTERING AND LEVELING: STEP-3b STEP-3d STEP-3a STEP-1 STEP-2 STEP-3c Technical Support Team Press (F3) for turn on the laser pointer. (optional) E-mail: [email protected] Fax : 04-2868016 Authors: Jobin & Vishnu, Tech. Support team (Topcon), Al Fajer Establishment, Dubai.
Citation preview
Technical Support Team
E-mail: [email protected]
Fax : 04-2868016
Authors: Jobin & Vishnu, Tech. Support team (Topcon), Al Fajer Establishment, Dubai.
TOPCON (GTS – 230 N) QUICK MANUAL
CENTERING AND LEVELING:
STEP-1
Set the instrument on the
tripod and press the power
button.
STEP-2
Press the star key for initial
settings.
STEP-3a
Press the up & down arrow
for contrast adjustment of
the display.
STEP-3b
Press (F1) for turn on the
backlight of the display
screen.
STEP-3c
Press (F2) for setting the
tilt correction
STEP-3d
Press (F3) for turn on the
laser pointer. (optional)
Technical Support Team
E-mail: [email protected]
Fax : 04-2868016
Authors: Jobin & Vishnu, Tech. Support team (Topcon), Al Fajer Establishment, Dubai.
********************************************************************
STEP-3e
Press (F4) for adjusting the
prism constant, temp&
pressure value etc.
Again,
Press F1for (Prism Con.)
Press F3for (Temp-Preas)
STEP-3f
Once you are complete the
leveling and centering, press
(Esc) button for exit.
Technical Support Team
E-mail: [email protected]
Fax : 04-2868016
Authors: Jobin & Vishnu, Tech. Support team (Topcon), Al Fajer Establishment, Dubai.
MAKING A NEW JOB:
STEP-1
Press the menu button.
STEP-2
Press (F1) for data collect.
Data collect is the detail
survey menu.
STEP-3
Press [F1] for inputting a new
job name or press [F2] for
selecting an existing job from
the list.
STEP-4
If you want to type the alpha
numeric characters, again
press [F1] and input that.Then
Press [F4] to accept the job.
NOTE: If you want to do both the topography and setting out exercises, please
select the same jobs in DATA COLLECT menu & LAYOUT menu.
********************************************************************
Technical Support Team
E-mail: [email protected]
Fax : 04-2868016
Authors: Jobin & Vishnu, Tech. Support team (Topcon), Al Fajer Establishment, Dubai.
CO-ORDINATES INPUTTING:
STEP-1
Press menu button to get the
main menu. Press F3 to select
the memory manager.
STEP-2
Press F4 for the next page.
STEP-3
Press F1 to input co ordinates.
STEP-4
Press F2 for getting the
created job list (if you know
the job name, you can type it
directly).
STEP-5
To select the job with up &
down arrow keys.
STEP-6
Then Press F4
STEP-7
Press [F1], for your co-
ordinate entry
Continues on NEXT PAGE
Technical Support Team
E-mail: [email protected]
Fax : 04-2868016
Authors: Jobin & Vishnu, Tech. Support team (Topcon), Al Fajer Establishment, Dubai.
NOTE: It is better to make a Control Point data sheet given below. This is
very useful for the surveyors on job handover situations.
JOB NAME Point.ID Northing Easting Elevation Code Name
AL FAJER 1 10.000 10.000 10.000 CP1
AL FAJER 4 2787545.098 5037555.088 10.400 DM1
AL FAJER 5 2787523.776 5037560.001 12.333 DM2
**********************************************************
STEP-8
Type the point ID
If
Press F1-Alpha numeric
Press F2-space
Press F3-clear screen
STEP-9
After typing you can
press [F4] or [enter]
STEP-10
Input the co-ordinates
STEP-11
You should type your
point name here.
STEP-12
After the inputting press
[F4] or [Enter]
STEP-13
This shows your input is
recorded to the memory.
Technical Support Team
E-mail: [email protected]
Fax : 04-2868016
Authors: Jobin & Vishnu, Tech. Support team (Topcon), Al Fajer Establishment, Dubai.
STATION SETTING
`
STEP-1
Press your MENU button and
Press (F1) for data collect.
(Data collect is the detail
survey menu.)
STEP-2
Press [F2] for selecting your
job from the list. And press
[F4] to set the job.
STEP-3
Press [F1]
for OCC.PT# INPUT
(occupied point is your
instrument’s station point )
STEP-4
After inputing the station’s
point ID, Instrument hight
etc. Then Press [F4]
STEP-5
Check your station co-
ordinates. If it is correct
Press [F3] and go to STEP-9,
else Press [F4]
STEP-6 Press [F4] to check the co-
ordinates entry.
STEP-7 Check the point Id and
Press [F4]
STEP-8 Check the recorded co-
ordinates and Press [F3]
Continues on NEXT PAGE
Technical Support Team
E-mail: [email protected]
Fax : 04-2868016
Authors: Jobin & Vishnu, Tech. Support team (Topcon), Al Fajer Establishment, Dubai.
STEP-9 Press [F3]
STEP-10 Press [F3]
STEP-11 This screen displays your
station is completed.
**********************************************************
Technical Support Team
E-mail: [email protected]
Fax : 04-2868016
Authors: Jobin & Vishnu, Tech. Support team (Topcon), Al Fajer Establishment, Dubai.
BACK STATION ORIENTATION:
NOTE: For Back orientation you can choose 3 ways.
1. Whole Circle Bearing ZERO SET.
2. Known W.C.Bearing SET.
3. Back Station Co-ordinate SET.
� BACK STATION BY WHOLE CIRCLE BEARING ZERO SET:
STEP-1
After the station set up, orient
the telescope to the Back
station point. Then Press [F2]
for start the Back sighting.
STEP-2 Press [F2] for ZERO set
STEP-3
Now you should get this
message on the screen.
STEP-4 Press [F3] for start measuring
STEP-5 Press [F3] for start
co-ordinate measuring
STEP-6
Once the machine starts the
measuring, quickly press ESC
button. Because now your
bearing is set as ZERO. Again
press ESC button and start the
survey works.
NOTE: If you want to know the co-ords of the BS point, wait upto the complete
measurement. For recording that data, Press [F3]
**********************************************************
Technical Support Team
E-mail: [email protected]
Fax : 04-2868016
Authors: Jobin & Vishnu, Tech. Support team (Topcon), Al Fajer Establishment, Dubai.
� BACK STATION BY KNOWN W.C.BEARING SET:
STEP-1
After the station set up, orient
the telescope to the Back
station point. Then Press [F2]
for start the Back sighting.
STEP-2 Press [F4] for BS inputting.
STEP-3
Press [F3]
STEP-4 Press [F3]
STEP-5 Press [F1] for Azimuth
inputting.
STEP-6
Type your W.C.B on this
window.
(12.0259 means 12° 2’ 59”)
STEP-7 Now you should get this
message on the screen.
STEP-8 Press [F3] for start measuring
Continues on NEXT PAGE
Technical Support Team
E-mail: [email protected]
Fax : 04-2868016
Authors: Jobin & Vishnu, Tech. Support team (Topcon), Al Fajer Establishment, Dubai.
STEP-9 Press [F3] for start
co-ordinate measuring
STEP-10
Once the machine starts the
measuring, quickly press ESC
button. Because now your
bearing is set as ZERO. Again
press ESC button and start the
survey works.
NOTE: If you want to know the co-ords of the BS point, wait upto the complete
measurement. For recording that data, Press [F3] .
**********************************************************
Technical Support Team
E-mail: [email protected]
Fax : 04-2868016
Authors: Jobin & Vishnu, Tech. Support team (Topcon), Al Fajer Establishment, Dubai.
� BACK STATION BY CO-ORDINATE SET:
STEP-1
After the station set up, orient
the telescope to the Back
station point. Then Press [F2]
for start the Back sighting.
STEP-2
Press [F1] and input the back
station point id, PCODE, and
Reflector Height. Then
Press [F3] for confirmation.
STEP-3
Press [F3] for starting the
co-ordinate measure.
STEP-4 Now you should get this
message on the screen.
STEP-5
After checking the co-ords
Press [F3] for recording the
co-ordinate measurement.
STEP-6
Now you should get this
message on the screen.
STEP-7
Now you should get this
message on the screen. This
shows your Back station is set
properly.
**********************************************************
Technical Support Team
E-mail: [email protected]
Fax : 04-2868016
Authors: Jobin & Vishnu, Tech. Support team (Topcon), Al Fajer Establishment, Dubai.
TOPOGRAPHIC SURVEYING
STEP-1 Press [F1] for preparing a
detail survey.
STEP-2
After completing the station
& B/S set up orient the
telescope to the prism. Then
Press [F3] to start detail
surveying.
STEP-3
Input the starting point no, code, and reflector height. Then Press [F4]
STEP-4 Press [F3] to prepare the
measurement.
STEP-5 Press [F3] to start the co-
ordinate measurement.
STEP-6 Then you should see this
message
STEP-7
Confirm your co- ordinate and
Press [F3] to record this data.
STEP-8
After record, your point Id
will be increasing
automatically.
**********************************************************
Technical Support Team
E-mail: [email protected]
Fax : 04-2868016
Authors: Jobin & Vishnu, Tech. Support team (Topcon), Al Fajer Establishment, Dubai.
NOTE: If you want to record the data with same code and same reflector height,
you have to do shown on below.
STEP-1 Press [F4] to start measuring
STEP-2 Then you should see this
message
STEP-3
Confirm your co- ordinate and
Press [F3] to record this data.
STEP-4
This message shows that your
data has recorded to the
memory.
**********************************************************
Technical Support Team
E-mail: [email protected]
Fax : 04-2868016
Authors: Jobin & Vishnu, Tech. Support team (Topcon), Al Fajer Establishment, Dubai.
TOPOGRAPHIC SURVEYING WITH OFFSET MEASUREMENT
STEP-1
Input the starting point no, code, and reflector height. Then Press [F3]
STEP-2 Press [F4] for choosing next
page.
STEP-3
Press [F1] for choosing
OFFSET menu.
STEP-4
Most commonly using offset
system is the 2nd
one. So Press
[F2]
NOTE: This offset function
is working as per this figure.
Here, the telescopic line
between building corner and
the instrument is obstructed
by a tree. Before inputting,
please confirm the offset
lengths from the chainman
side. Now your required
point (Building Corner) is
2m forward and 1m left of
the actual observed
point (prizm).
STEP-5
Input your Left (-) or Right
(+) offset. Here your offset is
1m left. So input -1 and
Press [F4] for enter.
Continues on NEXT PAGE
Technical Support Team
E-mail: [email protected]
Fax : 04-2868016
Authors: Jobin & Vishnu, Tech. Support team (Topcon), Al Fajer Establishment, Dubai.
STEP-6
Input your forward (+) or
Backward (-) offset. Here
your offset is 1m forward. So
input 2m and Press [F4] to
enter.
STEP-7 Press [F3] to start co-ordinate
measuring
STEP-8 This screen shows, the
machine is measuring.
STEP-9
This is the calculated co-
ordinates and if you want
record Press [F3].
STEP-10 This screen shows your data
has recorded to the memory.
STEP-11
This screen shows your
instrument is ready for next
observation.
**********************************************************