2.1CH Soundbar with Built-in Subwoofer 2.1...Play/pause/resume playback in Bluetooth® mode. 7. MOVIE Button Press to switch to MOVIE EQ effect. 8. BASS +/– Button Press to increase/decrease

2.1CH Soundbar with Built-in SubwooferInstruction Manual

L32SBIN16

L32SBIN16_IB_Final191216V8.indd 1 17/12/2019 11:08


Contents

Safety Warnings ..................................................................................................................................... 4

Unpacking .............................................................................................................................................. 6

Product Overview .................................................................................................................................. 7Front View .............................................................................................................................................................................7Top View ................................................................................................................................................................................7Rear View ..............................................................................................................................................................................7

Remote Control ...................................................................................................................................... 8

Remove the Plastic Strip from the Remote Control ............................................................................ 8

Battery Replacement for the Remote Control ..................................................................................... 9

Remote Control Operation Range ......................................................................................................10

Wall Mounting .....................................................................................................................................10

Connections .........................................................................................................................................12Method 1: Optical / Coaxial Connection ................................................................................................................12Method 2: Using the AUX Connection ....................................................................................................................13Method 3: Connecting to an external device .......................................................................................................14Connecting to the Mains Supply...............................................................................................................................14

General Operation ...............................................................................................................................15Selecting Modes ..............................................................................................................................................................15Adjusting the Volume....................................................................................................................................................15Selecting the Equaliser .................................................................................................................................................15Adjusting the Bass/Treble Level in CUSTOM EQ mode .....................................................................................16

Bluetooth® Operation ..........................................................................................................................16Listen to Music from Bluetooth® Device ................................................................................................................17

Maintenance ........................................................................................................................................17

Hints and Tips ......................................................................................................................................18

Specifications .......................................................................................................................................19


4

• Read all the instructions carefully before using the unit and keep them for future reference.

• Retain the manual. If you pass the unit onto a third party make sure to include this manual.

• Check that the voltage marked on the rating label matches your mains voltage.

Damage• Please inspect the unit for damage after

unpacking.• Do not continue to operate the unit if you

are in any doubt about it working normally, or if it is damaged in any way - switch off, withdraw the mains plug and consult your dealer.

Location of Unit• The unit must be placed on a flat stable

surface and should not be subjected to vibrations.

• Do not place the unit on sloped or unstable surfaces as the unit may fall off or tip over.

• The mains socket must be located near the unit and should be easily accessible.

• This unit is designed for indoor use only.

Temperature• Avoid extreme degrees of temperature,

either hot or cold. Place the unit well away from heat sources such as radiators or gas/electric fires.

• Avoid exposure to direct sunlight and other sources of heat.

Naked Flames• Never place any type of candle or naked

flame on the top of or near the unit.

Moisture• To reduce the risk of fire, electric shock or

product damage, do not expose this unit to rain, moisture, dripping or splashing. No objects filled with liquids, such as vases, should be placed on the unit. Do not operate the unit with wet hands, near water or other liquid.

• If you spill any liquid into the unit, it can cause serious damage. Switch it off at the mains immediately. Withdraw the mains plug and consult your dealer.

Safety Warnings

Ventilation• To prevent the risk of electric shock or

fire hazard due to overheating, ensure that curtains and other materials do not obstruct the ventilation vents.

• A minimum distance of 5cm around the unit should be maintained to allow for sufficient ventilation.

• Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure the unit is well ventilated.

Safety• Always disconnect the unit from the mains

supply before connecting/ disconnecting other devices or moving the unit.

• Unplug the unit from the mains socket during a lightning storm.

Mains Cable• Make sure the unit or unit stand is not

resting on top of the mains cable, as the weight of the unit may damage the mains cable and create a safety hazard.

• If the mains cable is damaged it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.

The mains plug is used as disconnect device, the disconnect device shall remain readily operable.

Interference• Do not place the unit on or near appliances

which may cause electromagnetic interference. If you do, it may adversely affect the working of the unit, and cause a distorted sound.

Batteries• Batteries used in the unit are easily

swallowed by young children and this is dangerous.

• Keep loose batteries away from young children and make sure that the battery holder tray is secure in the unit. Seek medical advice if you believe a cell has been swallowed.

• Please dispose of batteries correctly by following the guidance in this manual.


5

• Do not expose the battery to direct sunlight or sources of excessive heat.

• Do not ingest the battery, Chemical Burn Hazard.

• The remote control supplied with this product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.

• Keep new and used battery away from children.

• If the battery compartment does not close securely, stop using the product and keep it away from children.

• If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Supervision• Children should be supervised to ensure

that they do not play with the unit.• Never let anyone especially children push

anything into the holes, slots or any other openings in the case - this could result in a fatal electric shock.

CAUTIONRISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the unit’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the manual accompanying the unit.

Service• To reduce the risk of electric shock, do not

remove screws. The unit does not contain any user-serviceable parts. Please leave all maintenance work to qualified personnel.

• Do not open any fixed covers as this may expose dangerous voltages.

Maintenance• Ensure to unplug the unit from the power

supply before cleaning.• Do not use any type of abrasive pad or

abrasive cleaning solutions as these may damage the unit’s surface.

• Do not use liquids to clean the unit.

~ AC voltage: This symbol indicates that the rated voltage marked with the symbol is AC voltage.

DC voltage: This symbol indicates that the rated voltage marked with the symbol is DC voltage.

• This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.


6

UnpackingRemove all items from the packaging. Retain the packaging. If you dispose of it please do so according to local regulations.

The following items are included:

Remote Control

Coaxial Cable 3.5 mm to 3.5 mm Audio Cable

Mains Cable

Main Unit

Instruction Manual

InstructionManual

Wall Bracket x 2

Thank you for purchasing your new product.We recommend that you spend some time reading this instruction manual in order that you fully understand all the operational features it offers. You will also find some hints and tips to help you resolve any issues.Read all the safety instructions carefully before use and keep this instruction manual for future reference.

If items are missing, or damaged please contact Partmaster (UK only).Tel: 0344 800 3456 for assistance.

Screw × 2 Dowel × 2


7

Product Overview

Front View

Top View

Rear View

1. POWER IndicatorLight up in Standby mode.

2. AUX IndicatorLight up green in AUX mode.Light up once while selecting CUSTOM EQ effect.

3. Bluetooth® IndicatorLight up blue in Bluetooth® mode.Light up once while selecting MUSIC EQ effect.

1. ButtonSwitch the unit between On and Standby mode.

2. SRC ButtonPress repeatedly to select between AUX , Bluetooth®, Optical or Coaxial mode

1. AC~ Socket2. SERVICE ONLY Socket

The USB socket is for service only. It is not designed to charge smartphones, tablets or similar devices.

4. Optical IndicatorLight up orange in Optical mode.Light up once while selecting MOVIE EQ effect.

5. Coaxial IndicatorFlash orange in Coaxial mode.

2 3 4 51

AC~

SERVICE ONLY

AUX

COAXIAL

OPTICAL

1

345

2

3. AUX Socket4. COAXIAL Socket5. OPTICAL Socket

1 2 3 4

3. EQ ButtonPress repeatedly to select between CUSTOM / MOVIE / MUSIC EQ effect.

4. VOL +/– ButtonPress to increase/decrease volume.


8

1

2345

67

8

9

10

11

12

13

14

15

Remote Control

1. ButtonSwitch the unit between On and Standby mode.

2. OPTICAL ButtonPress to select OPTICAL mode.

3. COAXIAL ButtonPress to select COAXIAL mode.

4. AUX ButtonPress to select AUX mode.

5. ButtonSkip to previous track/Skip to next track in Bluetooth® mode.

6. ButtonPlay/pause/resume playback in Bluetooth® mode.

7. MOVIE ButtonPress to switch to MOVIE EQ effect.

8. BASS +/– ButtonPress to increase/decrease the bass level in default EQ mode.

Remove the Plastic Strip from the Remote ControlRemove the plastic strip from the battery if the battery is being used for the first time. It is located at the bottom rear of the remote control.

9. CUSTOM ButtonPress to select the default EQ setting.

10. MUTE ButtonSilence the unit or restore the sound.

11. BT ButtonPress to select Bluetooth® mode.

12. PAIR ButtonPress to activate the pairing function in Bluetooth® mode and disconnect the existing paired Bluetooth® device.

13. VOL +/– ButtonPress to increase/decrease volume.

14. MUSIC ButtonPress to switch to MUSIC EQ effect.

15. TREBLE +/– ButtonPress to increase/decrease the treble level in default EQ mode.


9

Battery Replacement for the Remote ControlThe remote control requires a CR2025, 3V Lithium battery.

1. Slide and hold the battery release tab in the direction of the arrow.

2. Pull out the battery holder and remove the old battery.

3. Replace with a new battery.

4. Insert the battery holder back into the remote control.

Handling the Battery• Improper or incorrect use of batteries may cause corrosion or battery leakage,

which could cause fire, personal injury or damage to property.• Install the battery correctly in the battery compartment. • When the battery is exhausted, the remote control will not function.• Only use the battery type indicated in this manual.• Do not dispose of the used battery as domestic waste. Dispose of it in

accordance with local regulations.• Small button cell batteries such as the one used in the remote control are

easily swallowed by young children and this is dangerous. Keep loose button cells away from young children and make sure that the battery is secure in the remote control. Seek medical advice if you believe a battery cell has been swallowed.

Handling the Remote Control• Take care of your fingernails when you slide and pull the battery release tab.• Do not drop the remote control.• Do not allow anything to impact the remote control.• Do not spill water or liquid on the remote control.• Do not place the remote control on a wet object.• Remove the battery from the remote control when not in use for a long period

of time, as corrosion or battery leakage may occur and result in physical injury, and/or property damage, and/or fire.


10

Remote Control Operation Range• The remote control sensor at the front unit is

sensitive to the remote control’s commands up to a maximum of 6 metres away and within a maximum of a 60° arc.

• Please note that the operating distance may vary depending on the brightness of the room.

30° 30°

Max. 6 m

Wall Mounting

1. Remove the screws from the main unit.

2. Attach the wall brackets to the main unit with the screws removed from the main unit.

Wall bracket

Screw

• Installation must be carried out by qualified personnel only. Incorrect assembly can result in severe personal injury and property damage (if you intend to install this product yourself, you must check for installations such as electrical wiring and plumbing that may be buried inside the wall). It is the installer’s responsibility to verify that the wall will safely support the total load of the soundbar.

• Additional tools (not included) are required for the installation.• Do not overtighten screws.• Keep this instruction manual for future reference.• Use an electronic stud finder to check the wall type before drilling and mounting.


11

3. Drill 2 parallel holes (Ø ~6 mm each according to wall type) in the wall. Fix two screws onto the wall. They should be parallel to each other. The distance between the two screws should be 657 mm.

ø2.5~3mm

ø ~6mm

657 mm

657 mm

5 mm

25-30 mm

4. Leave a 5 mm gap between the wall and the screw’s head. Lift the unit with the attached wall brackets over the heads of the screws and slot into place.

Wall mounting with dowels and screws

Wall mounting with screws only

Make sure that the mounting screws are in the centre of the timer stud.


12

Connections

This section involves various methods of connecting the product to other external components. Ensure all audio connections of the unit are connected before connecting to the mains power socket.

After the unit is connected to an external device, audio will only be heard from the soundbar while the connected device is used as a source output.

Method 1: Optical / Coaxial ConnectionUse an optical cable (not included) / coaxial cable (included) to connect the soundbar’s OPTICAL / COAXIAL socket to the OPTICAL OUT / COAXIAL OUT socket of the external device. The simplest option is to connect your soundbar directly to your TV. If you connect the soundbar to another external device (e.g. Blu-Ray player), you will hear the sound from that device through the soundbar.

After the connection is complete,

1. Press button on the unit or remote control to switch on the unit.

2. Press SRC button on the unit repeatedly or press OPTICAL or COAXIAL button on the remote control to select Optical or Coaxial mode.

AC~

SERVICE ONLY

AUX

COAXIAL

OPTICAL

1

2

Optical cable (not included)

Coaxial cable (included)

TV

Rear view of the unit

DO NOT connect the soundbar to the TV through its Yellow/Red/White sockets.

The unit may not be able to decode all digital audio formats from the input source. In this case, the Optical/Coaxial indicator will flash quickly, and the unit will prompt “Unsupported format, please refer to the Instruction Book”. This is NOT a defect. Ensure that the audio setting of the input source (e.g. TV, game console, DVD player, etc.) is set to PCM (Refer to the user manual of the input source device for its audio setting details) with Optical/Coaxial input.


13

Method 2: Using the AUX ConnectionUse the 3.5 mm to 3.5 mm stereo audio cable (included) to connect the AUDIO OUT / HEADPHONE socket of the external device (e.g. TV, DVD player, etc.)to the unit’s AUX socket. Please ensure that the output volume is turned up in order for the soundbar to operate.

After the connection is complete,


2. Press SRC button on the unit repeatedly or press AUX button on the remote control to select AUX mode.

AC~

SERVICE ONLY

AUX

COAXIAL

OPTICAL

Please refer to the user manual of your TV to change the functionality of your headphone socket to a line out if possible.

3.5 mm to 3.5 mm Stereo Audio Cable (included)AUDIO OUT /

HEADPHONE Socket

Set-top Box

TV


Blu-ray Player / DVD Player

Satellite Receiver


14

Connecting to the Mains Supply• Ensure that the power supply voltage

corresponds to the voltage printed on the back or the underside of the unit.

• The soundbar is designed to operate with the supplied mains cable.

• Connecting the main unit to any other power source may cause damage to the unit. Unwind the mains cable to its full length.

• Connect the mains plug of the main unit to a mains socket. Make sure the mains plug is fully inserted into the mains socket. The soundbar is now connected and ready to use.

• To switch off the soundbar completely, remove the mains plugs from the mains sockets.

Ensure all audio connections of the unit are connected before connecting to the mains power socket.

AC~

SERVICE ONLY

AUX

COAXIAL

OPTICAL

AC~

SERVICE ONLY

AUX

COAXIAL

OPTICAL

Method 3: Connecting to an external deviceUse the 3.5 mm to RCA stereo audio cable (not included) to connect the AUDIO OUT sockets (L/R) of an external device to the unit’s AUX socket.


2. Press SRC button on the unit repeatedly or press AUX button on the remote control to select AUX mode.

3.5 mm to RCA stereo audio cable (not included)


TV Blu-ray Player / DVD Player

Set-top Box

Satellite Receive

Game Console

To the mains socket

red (R)

white (L)


15

General OperationWhen you first connect the main unit to the mains socket, the main unit will be in Standby mode. The POWER indicator will light up red.

• Press the button on the main unit or remote control to switch the main unit on. The status indicator of the last used mode will light up.

• Press the button on the main unit or remote control to switch the main unit back to Standby mode. The POWER indicator will light up red.

• Disconnect the mains plug from the mains socket if you want to switch the unit off completely.

The eco-friendly technology will switch this device to Standby mode automatically when the input volume is too low or muted for 15 minutes.

Selecting ModesPress the SRC button on the main unit repeatedly to switch between AUX, Bluetooth®, Optical or Coaxial mode, or press AUX, BT, OPTICAL or COAXIAL button on the remote control to select your desired mode.

Adjusting the Volume• Press the VOL +/– button to adjust the volume.

• If you wish to turn the sound off, press the MUTE button on the remote control. Press the MUTE button again or press the VOL +/– button to resume normal listening.

• While adjusting the volume, the status indicator flashes quickly.

• While the volume level reaches its maximum level, if you press the VOL + button again, the status indicator flashes once. While the volume level reaches its minimum level, if you press the VOL – button again, the status indicator flashes once.

If the unit is connected with an external device, you may also adjust the volume of the input source for volume control.

Selecting the EqualiserWhile playing, press EQ button on the unit repeatedly, or press CUSTOM / MOVIE / MUSIC button on the remote control to select between preset equalisers: CUSTOM (default EQ mode), MOVIE (recommended for viewing movies) and MUSIC (recommended for listening to music).

• When Coaxial or Optical mode is selected, the unit will automatically switch into MOVIE EQ effect.

• When AUX or Bluetooth® mode is selected, the unit will automatically switch into MUSIC EQ effect.


16

Bluetooth® OperationYou can listen to tracks from a media device if it is connected to the unit via Bluetooth®.

• The operational range between the main unit and a Bluetooth® device is approximately 8 metres.

• Before you connect a Bluetooth® device to this unit, familiarize yourself with the Bluetooth® capabilities of the device.

• Compatibility with all Bluetooth® devices is not guaranteed.• Any obstacle between this unit and a Bluetooth® device can reduce the

operational range.• Keep this unit away from other electronic devices that may cause interference.

To connect your device to the unit via Bluetooth®, follow the steps below:

1. Switch the unit on. Press the SRC button on the main unit repeatedly or the BT button on the remote control to select Bluetooth® mode, the Bluetooth® indicator will flash slowly. The unit is now in pairing mode.

2. Activate your Bluetooth® device and select the search mode.

3. “L32SBIN16” will appear on your Bluetooth® device. Select “L32SBIN16” and enter “0000” for password if necessary.

4. On successful pairing, you will hear “Paired“ from the unit, and the Bluetooth® indicator will light up steadily.

To disconnect the Bluetooth® function, switch to another function on the unit or disable the function from your Bluetooth® device, or press the PAIR button on the remote control. After the Bluetooth® device is disconnected from the soundbar, you will hear “DISCONNECT” from the unit.

Adjusting the Bass/Treble Level in CUSTOM EQ mode1. Press EQ button on the unit repeatedly, or press CUSTOM button on the remote control

to select default EQ mode. The AUX indicator (Green) will light up once.

2. Press BASS +/– or TREBLE +/– button on the remote control to adjust the bass/treble level.

• While adjusting the bass/treble level, the status indicator flashes quickly.• While the BASS/TREBLE reaches its maximum or minimum level, the status

will flash once if you press BASS +/– or TREBLE +/– button again.

The table below also shows the EQ mode supporting bass/treble adjustment.

EQ Mode Adjusting Bass Level? Adjusting Treble Level?

Custom 3 3

Movie N/A N/A

Music N/A N/A


17

• If there is an existing connection, press PAIR button on the remote control to re-activate the pairing mode, the existing connection will be interrupted.

• If no other Bluetooth® device pairs with this player within two minutes, the player will recover its previous connection.

• The player will also be disconnected when your device is moved beyond the operational range.

• If you want to reconnect your device to this player, place it within the operational range.

• If the device is moved beyond the operational range, when it is brought back, please check if the device is still connected to the player.– If the connection is lost, follow the instructions above to pair your device to

the player again.

Listen to Music from Bluetooth® Device• If the connected Bluetooth® device supports Advanced Audio Distribution Profile (A2DP),

you can listen to the music stored on the device through the player.

• If the device also supports Audio Video Remote Control Profile (AVRCP), you can use the player’s remote control to play music stored on the device.

1. Pair your device with the player.

2. Play music via your device (if it supports A2DP)

3. Use supplied remote control to control play (if it supports AVRCP)

• To pause/resume play, press the button.

• To skip to a track, press the button.

Maintenance

Ensure the unit is fully unplugged from the mains socket before cleaning.

• To clean the unit, wipe the case with a slightly moist, lint-free cloth.

• Do not use any cleaning fluids containing alcohol, ammonia or abrasives.

• Do not spray aerosol at or near the unit.


18

Hints and TipsIf a problem occurs, it may often be due to something very minor. The following table contains various tips.

Problem Solution

No power. • Ensure the mains cable is connected securely.• Make sure that the unit is switched on.

Loud hum or noise is heard.

The plugs and sockets are dirty. Wipe them with a cloth slightly moistened with an appropriate non-abrasive cleaning solution.

The remote control does not work.

• Use the remote control near the unit.• Point the remote control at the remote control sensor on the

main unit.• Replace the battery in the remote control with a new one.• Remove any obstacles between the remote control and the unit.

The unit does not respond when pressing any buttons.

The unit may freeze up during use. Switch the unit off and then on again at the mains socket to reset the unit.

No sound output from the main unit

• Make sure that the unit is not muted. Press the MUTE Button or the VOL + Button to resume normal listening.

• Ensure the audio setting of the input source (e.g. TV, game console, DVD player, etc.) is set to PCM mode while using optical or coaxial connection.

The sound output effect sounds unfamiliar

Press the EQ Button on the unit repeatedly or press CUSTOM / MOVIE / MUSIC button on the remote control for the optimal sound output effect.

I cannot find “L32SBIN16” on my Bluetooth® device

• Ensure that the unit is switched on.• Ensure that the Bluetooth® function is activated on your

Bluetooth® device.• The unit has a Bluetooth® function that can receive a signal within

8 metres. Keep a distance within 8 metres between the unit and your Bluetooth® device.

The unit will sometimes switch back to standby mode automatically.

The eco-friendly technology will switch this device to Standby mode automatically when the input volume is too low or muted for 15 minutes. Press the button on the main unit or remote control to switch the main unit on again.

If any functional abnormality is encountered, unplug the unit from the mains socket and reconnect it again.


19

Specifications

Model L32SBIN16

Main Unit

Power Supply AC 220 – 240V ~50/60 Hz

Main Unit Power Consumption 30 W

USB Service Port 5 V 500 mA (for service use only)Do NOT use for other purpose

Amplifier Output Power 15 W rms × 2 + 30 W rms

Bluetooth® Bluetooth® Version Bluetooth® 3.0

Maximum transmitted power 7 dBm

Frequency bands 2402 MHz ~ 2480 MHz

Ecodesign Information

Information on Power Consumption

Power Consumption of Another Condition (Sound bar was connected to AC mains via detachable power cordset, and without status display, and the USB port with 5V output and all network ports are deactivated)

< 0.5 W

Network Standby Power Consumption

< 2.0 W

Time interval for power management function switches the unit automatically into Another Condition (Sound bar was connected to AC mains via detachable power cordset, and without status display, and the USB port with 5V output and all network ports are deactivated)

Switch to another condition within 15 minutes after intended use

Power consumption in network standby if all wireless network ports are activated

1.0 W

How to activate wireless network port:• Switch to wireless mode (e.g. Bluetooth®, etc)• Connect the unit with powerHow to deactivate wireless network port:• Press the Standby button

Net Weight 2.1 kg

Dimension (W x H x D) 815 × 58 × 85 mm

Features and specifications are subject to change without prior notice.


All trademarks are the property of their respective owners and all rights are acknowledged.

The symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.For more information about where you can drop off your waste for recycling, please contact your local authority, or where you purchased your product.

Notes for battery disposalThe batteries used with this product contain chemicals that are harmful to the environment. To preserve our environment, dispose of used batteries according to your local laws or regulations. Do not dispose of batteries with normal household waste.For more information, please contact the local authority or your retailer where you purchased the product.

In the unlikely event of a problem developing, please contact the store where you purchased your equipment.We continually strive to improve our products; specifications may change without prior notice.For advice on where to purchase accessories, please contact the store where you purchased your equipment.

Visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories. With over 1 million spares and accessories available we can deliver direct to your door the very next day. Visit

www.partmaster.co.uk or call 0344 800 3456 (UK customers only) Calls charged at National Rate.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by DSG Retail Limited is under license. Other trademarks and trade names are those of their respective owners.

IB-L32SBIN16-191211V8

DSG Retail Ltd. (co. no. 504877) 1 Portal Way, London, W3 6RS, UK

EU Representative DSG Retail Ireland Ltd (259460)

3rd Floor Office Suite, Omni Park SC, Santry, Dublin 9, Republic of Ireland


Documents

2.1CH Soundbar with Built-in Subwoofer 2.1...Play/pause/resume playback in Bluetooth® mode. 7. MOVIE Button Press to switch to MOVIE EQ effect. 8. BASS +/– Button Press to increase/decrease