Upload
karunamoorthy-periasamy
View
222
Download
0
Embed Size (px)
Citation preview
7/30/2019 20_OUTURN SHLL
1/15
Training Document End UserManual
CRIS-ICF-SAP ServicesD3304
Document Version / Dtails : Ver 1.0/ 15-Oct-11
Record of Release
VersionNo.
Modified By Reviewed By Authorized By Release Date Modifications Done
1.0 Jayaganapathy RamagiriSrinivasrao
Sivakumar Kasi
7/30/2019 20_OUTURN SHLL
2/15
D3304-CRIS-ICF-PP- End User Manual
SAP-MTI- Page 2 of 15
Ver 1.0/15-Oct-11 L&T InfoTech Confidential
Table of Contents
1. ICON Details on SAP Screen
1.0 General Information for all transactions
2.0 Stages for Shell Outturn
2.1 Work centers for stages
2.2 Input Logic for Daily Outturn Shell
2.3 Daily outturn shell
3.0 Daily outturn shell- create mode
3.1 Daily outturn shell- change mode
3.2 Daily outturn shell- Display mode
4) Daily outurn shll step by step process
7/30/2019 20_OUTURN SHLL
3/15
D3304-CRIS-ICF-PP- End User Manual
SAP-MTI- Page 3 of 15
Ver 1.0/15-Oct-11 L&T InfoTech Confidential
1.0 ICON Details on SAP Screen
General Information for all Transactions
Icons Quick Reference
ICON Details (Short Keys) Description Action Taken on Screen
(F3) Back Go back one screen
(F12)Cancel Cancel the activity
(F7)Display Display the Details
(Enter)Enter Continue
(F8)Execute Run Program
(Shift+F3)Exit Exit the Window
New Window Create New Window
(Shift+F8) Overview Display the History
(Ctlr+S)Save Save the records
(F1)Help Get Help
(Shift+F2)Delete Delete records
(Shift+F9)Copy Copy records
(F5) Create Create New Data
(F6)Change Change the Records
(F4)Pick List Select the possible Entries
Command Field Command Field
(Ctlr+Shift+F2)Details Data Information
(Ctlr+F)Search Search for records
7/30/2019 20_OUTURN SHLL
4/15
D3304-CRIS-ICF-PP- End User Manual
SAP-MTI- Page 4 of 15
Ver 1.0/15-Oct-11 L&T InfoTech Confidential
2.0 Stages For Shell Outturn
TCODE CR21
Stages Description
Stage1 Side wall & End Wall
Stage2 Roof-JIG
Stage3 Roof-TRE
Stage4 Underframe-JIG
Stage5 Underframe-TRE
Stage6 Body Jig
Stage7 10th StandStage8 11th Stand
Stage9 12th Stand
Stage10 B to C
Stage11Wheeling & Roof LeakTest
Stage12 Despatch
7/30/2019 20_OUTURN SHLL
5/15
D3304-CRIS-ICF-PP- End User Manual
SAP-MTI- Page 5 of 15
Ver 1.0/15-Oct-11 L&T InfoTech Confidential
2.1 Work centers for stages
Line Description Line Description B_JIG_1 Line I
R_JIG_1 Line I U_JIG_1 Line I B_JIG_2 Line II
R_JIG_2 Line II U_JIG_2 Line II B_JIG_3 Line III
R_JIG_3 Line III U_JIG_3 Line III B_JIG_3A Line
R_JIG_3A Line III-A U_JIG_3A Line III-A B_JIG_4 Line IV
R_JIG_4 Line IV U_JIG_4 Line IV B_JIG_4A Line
R_JIG_4A Line IV-A U_JIG_4A Line IV-A B_JIG_5 Line V
R_JIG_5 Line V U_JIG_5 Line V B_JIG_5A Line V-R_JIG_5A Line V-A U_JIG_5A Line V-A B_JIG_6 Line VI
R_JIG_5B Line V-B U_JIG_5B Line V-B B_JIG_6A Line
R_JIG_6 Line VI U_JIG_6 Line VI B_JIG_6B Line
R_JIG_6A Line VI-A U_JIG_6A Line VI-A B_JIG_7 Line
R_JIG_7 Line VII U_JIG_7 Line VII B_JIG_7A Line
R_JIG_7A Line VII-A U_JIG_7A Line VII-A B_JIG_7B Line
R_JIG_7B Line VII-B U_JIG_7B Line VII-B B_JIG_8 Line
R_JIG_7C Line VII-C U_JIG_7C Line VII-C B_JIG_8A Line
R_JIG_8 Line VIII U_JIG_8 Line VIII B_JIG_8B Line
R_JIG_8A Line VIII-A U_JIG_8A Line VIII-A
7/30/2019 20_OUTURN SHLL
6/15
D3304-CRIS-ICF-PP- End User Manual
SAP-MTI- Page 6 of 15
Ver 1.0/15-Oct-11 L&T InfoTech Confidential
2.2 Input Logic For Daily Outurn Shell
LOGIC Remarks
Stage1 Independent System should allow to create
Stage2 Independent System should allow to create though stage1 isnot planned or completed
Stage3 Dependent on completion of Stage2If Stage2 is completed, then only stage3 isallowed.
Stage4 Independent System should allow though stage1,2,3 are notplanned or completed
Stage5 Dependent on completion of Stage4
If Stage4 is completed, then only stage5 is
allowed.Stage6 Dependent on completion of Stage
1,2,3,4,5If Stage1,2,3,4,5 is completed, then only stage6is allowed.
Stage7 Independent System should allow though stage1,2,3,4,5,6are not planned or completed
Stage8 Independent System should allow though stage1,2,3,4,5,6,7are not planned or completed
Stage9 Independent System should allow thoughstage1,2,3,4,5,6,7,8 are not planned orcompleted
Stage10 Dependent on completion of Stage 6,7,8,9 If Stage6, 7,8,9 is completed, then only stage10is allowed.
Stage11 Dependent on completion of stage10 If Stage6, 7, 8,9,10 is completed, then onlystage11 is allowed.
Stage12 Dependent on completion of stage11 If Stage6, 7,8,9,10,11 is completed, then onlystage12 is allowed.
7/30/2019 20_OUTURN SHLL
7/15
D3304-CRIS-ICF-PP- End User Manual
SAP-MTI- Page 7 of 15
Ver 1.0/15-Oct-11 L&T InfoTech Confidential
2.3 Daily Outurn ShellType the T-code ZPP_SDAY in the command field and press enter
Daily Outturn Entry Shell screen will appear
Ground Status of Coach Position will be entered in SAP and this report will be displayed in portal
For a shell outturn it has to pass 12 stages, it will be processed by work center (jigs& fixture) particular to thestage
3.0Daily Outturn Entry-Shell- create mode
Input
Intake sub screen first select the date, select position of the coach in which stage its laying and then in statussub screen select work center(where it is processed) ,give the coach type, serial no(assembly no) , plan date andenter save
7/30/2019 20_OUTURN SHLL
8/15
D3304-CRIS-ICF-PP- End User Manual
SAP-MTI- Page 8 of 15
Ver 1.0/15-Oct-11 L&T InfoTech Confidential
3.1 Daily Outturn Entry-Shell- change mode
Input
Pres execute
In change mode for a particular stage we can enter start date, completion date & completed status , you willnot be able to change the Work center, Coach type, Assy no, plan date as it will be grayed out
7/30/2019 20_OUTURN SHLL
9/15
D3304-CRIS-ICF-PP- End User Manual
SAP-MTI- Page 9 of 15
Ver 1.0/15-Oct-11 L&T InfoTech Confidential
3.2Daily Outturn Entry-Shell- display mode
Pres execute
In sub screen status
All the fields will be grayed out you can only view for particular date what is the stage position
4)Daily outurn shll step by step process
1) Intake sub screen Enter date, select stage 1& in status sub screen enter work center , coach type detail, Assy no, plan date & save
7/30/2019 20_OUTURN SHLL
10/15
D3304-CRIS-ICF-PP- End User Manual
SAP-MTI- Page 10 of 15
Ver 1.0/15-Oct-11 L&T InfoTech Confidential
2)In take sub screen Enter date, select stage press change &
In status sub screen give start date , completion date, Tick completed status & saveStage 2
Stage 3
Enter the Start Enter the Completion
Mark Completed Indicator
7/30/2019 20_OUTURN SHLL
11/15
D3304-CRIS-ICF-PP- End User Manual
SAP-MTI- Page 11 of 15
Ver 1.0/15-Oct-11 L&T InfoTech Confidential
Without confirming stage 2 you will not able to con firm stage 3
Stage 4
7/30/2019 20_OUTURN SHLL
12/15
D3304-CRIS-ICF-PP- End User Manual
SAP-MTI- Page 12 of 15
Ver 1.0/15-Oct-11 L&T InfoTech Confidential
Stage 5
Without confirming stage 4 you will not able to confirm stage 5
Stage 6
7/30/2019 20_OUTURN SHLL
13/15
D3304-CRIS-ICF-PP- End User Manual
SAP-MTI- Page 13 of 15
Ver 1.0/15-Oct-11 L&T InfoTech Confidential
After completion of stage 5, stage 6 will be completed
Stage 6 is confirmed after completion of stage 5
7/30/2019 20_OUTURN SHLL
14/15
D3304-CRIS-ICF-PP- End User Manual
SAP-MTI- Page 14 of 15
Ver 1.0/15-Oct-11 L&T InfoTech Confidential
Stage 7, 8, 9 are independent you can enter data parallel
Stage 8
Stage 9 completion status is not marked
7/30/2019 20_OUTURN SHLL
15/15
D3304-CRIS-ICF-PP- End User Manual
SAP-MTI- Page 15 of 15
Ver 1.0/15-Oct-11 L&T InfoTech Confidential
Stage 10 dependent on completion of 7, 8, 9
It will not allow you to confirm stage 10
Once stage 9 is confirmed you will be able to complete stage 10
Stage11, 12depends Confirmation depends upon stage 10