science.upm.edu.my · 2020. 8. 17. · 1 Associate Professor Dr. Khamirul Amin Matori Department of Physics, Faculty of Science, Universiti Putra Malaysia, 43400 UPM, Serdang, Selangor

1

Associate Professor Dr. Khamirul Amin Matori

Department of Physics, Faculty of Science, Universiti Putra Malaysia, 43400 UPM, Serdang, Selangor. Tel: +603 8946 6653 Fax: +603 8645 4454 H/P: +6016 2673321

Materials Synthesis and Characterization Laboratory, Institute of Advanced Technology, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor, Malaysia. Tel: +603 8946 7547 Fax: +603 8646 8470

[email protected]; [email protected]

Field of Specialization Material Science and Materials Engineering • Nanomaterials • Glass Ceramics • Ceramics Composite

Current Management Appointment

Deputy Dean (Development, Finance & Industry Community Relations Staff) (18 August 2016 – date) Faculty of Science, Universiti Putra Malaysia, 43400 UPM, Serdang, Selangor.

Previous Management Appointment

Head of Laboratory (2012 – 2016) Materials Synthesis and Characterization Laboratory, Institute of Advanced Technology (ITMA), UPM.

Current Appointment Associate Professor (2014 – date) Department of Physics, Faculty of Science, Universiti Putra Malaysia, 43400 UPM, Serdang, Selangor. Associate Researcher (2007 – date) Materials Synthesis and Characterization Laboratory, Institute of Advanced Technology, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor, Malaysia.

Previous Appointments Science Teacher (Physics) (1995 – 2001) Matriculation Centre, Universiti Pertanian Malaysia, Malaysia, 43400 UPM, Serdang, Selangor. Tutor (2001 – 2002) Department of Physics, Faculty of Science, Universiti Putra Malaysia, 43400 UPM, Serdang, Selangor. Lecturer (2002 – 2008) Department of Physics, Faculty of Science, Universiti Putra Malaysia, 43400 UPM, Serdang, Selangor. Senior Lecturer (2008 – 2014) Department of Physics, Faculty of Science, Universiti Putra Malaysia, 43400 UPM, Serdang, Selangor.

2

ACADEMIC QUALIFICATION 1. Bachelor of Science (Hons) in Physics – Universiti Pertanian Malaysia, Malaysia – (1995) 2. Master of Science (Materials Science) – Universiti Putra Malaysia, Malaysia – (2000) 3. PhD in Engineering materials – University of Sheffield, UK – (2007) ADMINISTRATIVE DUTIES AND OTHER RESPONSIBILITIES At International Level

1. Visiting Professor, Fakultas Matematika dan Ilmu Pengetahuan Alam, Universitas Negeri Yogyakarka, Indonesia, 3-9 November 2019.

2. Committee Member, “International Symposium on Advanced Materials and Nanotechnology 2019, (iSAMN2019)”, Marriott Hotel, Putrajaya, Malaysia, 19-20 August 2019.

3. Session Chair, “International Symposium on Advanced Materials and Nanotechnology 2019" (iSAMN2019), Marriott Hotel, Putrajaya, Malaysia, 19-20 August 2019.

4. Jury Panel, “Materials Technology Challenge 2.0” at International Symposium on Advanced Materials and Nanotechnology 2019 (iSAMN2019), Marriott Hotel, Putrajaya, Malaysia, 19-20 August 2019.

5. Advisor Lecturer, “International Physics Tour Outreach 2.0 (IPTO 2.0) Programme, Ataturk University, Erzurum Technical University and Ondokuz Mayis University, Turkey, 18th October – 31st October 2019.

6. Invited Speaker, “Current Trend and Status of Bioceramics for Dental Applications in UPM, Malaysia”, Symposium on Applied Sciences and Engineering (SASE2018), Atatürk University, Erzurum, Turkey, 26-28 November 2018.

7. Chairperson, Symposium on Applied Sciences and Engineering (SASE2018), Atatürk University, Erzurum, Turkey, 26-28 November 2018.

8. Invited Speaker, “Physical, Structural and Mechanical Properties of Glass Ionomer Cement Using Different Glass Composition from Vitreous Waste”, 30th Regional Conference on Solid State Science & Technology (RCSSST30), Swiss Garden Hotel Melaka, Melaka, Malaysia, 6-8 November 2018.

9. Technical Judge; 1st International Nanotechnology Olympiad (INO), Tehran, Iran, 10-17 April 2018.

10. Member, Friendliness Visit of The Malaysian Solid-State Science & Technology Society (MASS) Council Members Representatives to Universiti Riau (UNRI) and Universiti Islam Riau (UIR) at 16 - 18 Januari 2018

11. Visiting Lecturer, Universiti Riau (UNRI), Kampus Bina Widaya, Pekanbaru, Indonesia. 16 - 17 Januari 2018.

12. Invited Speaker, “Current Trend and Status of Willemite-based Ceramics for Optoelectronics Application in UPM” at Universiti Riau (UNRI), Kampus Bina Widaya, Pekanbaru, Indonesia. 17 Januari 2018.

13. Jury, 6th International Conference on Solid State Science and Technology 2017 (ICSSST 2017), 14-15 November 2017, Olive Tree Hotel, Penang.

14. Supervisor; Visiting Professor, Prof. Dr. Abdulkadir ÇİLTAŞ, Atatürk Üniversitesi, Ziraat Fakültesi, Tarımsal Biyoteknoloji Bölümü, 25240 Erzurum, TURKEY. 5 February 2016-25 May 2016.

15. Member, Technical Committee on Fine Ceramics (IKM/ISC-B/TC14), Institut Kimia Malaysia, 127B & 129A, Jalan Aminuddin Baki, Taman Tun Dr. Ismail, Taman Tun Dr. Ismail 60000 Kuala Lumpur, Malaysia (2016-date).

3

16. Chairperson, 29th Regional Conference on Solid State Science & Technology 2016 (RCSSST29), KSL Hotel & Resort, Johor Bahru, Malaysia, 15-17 November 2016.

17. Invited Speaker, 29th Regional Conference on Solid State Science & Technology 2016 (RCSSST29), KSL Hotel & Resort, Johor Bahru, Malaysia, 15-17 November 2016.

18. Oral Presentation Observer/Assessor, 29th Regional Conference on Solid State Science & Technology 2016 (RCSSST29), KSL Hotel & Resort, Johor Bahru, Malaysia, 15-17 November 2016.

19. Moderators, 29th Regional Conference on Solid State Science & Technology 2016 (RCSSST29), KSL Hotel & Resort, Johor Bahru, Malaysia, 15-17 November 2016.

20. Workshop Speaker; Workshop on Nanotechnology, 28 May 2016, Islamic University of Najafabad Branch, Isfahan, Iran.

21. Keynote Speaker; 1st International Symposium on Nanotechnology, 24–25 May 2016, Islamic University of Najafabad Branch, Isfahan, Iran.

22. Scientific Committee; 1st International Symposium on Nanotechnology, 24–25 May 2016, Islamic University of Najafabad Branch, Isfahan, Iran.

23. Co-Chairman, Malaysia (Malaysian Co-Organizing Committee); International Conference on Science and Technology for Sustainable Development 2016 (ICSTSD 2016), 24-26 May 2016, Hotel Istana, Kuala Lumpur, Malaysia.

24. Project Collaborator; Marie Sklodowska-Curie Research and Innovation Staff Exchange (MSCA-RISE 2015) Project, 2015.

25. Invited Speaker; The 5th International Conference on Solid State Science and Technology (ICSSST 2015), 13-15 December 2015, Bayview Hotel, Langkawi, Kedah, Malaysia.

26. Deputy Chairman; The 5th International Conference on Solid State Science and Technology (ICSSST 2015), 13-15 December 2015, Bayview Hotel, Langkawi, Kedah, Malaysia.

27. Secretariat Committee; The 5th International Conference on Solid State Science and Technology (ICSSST 2015), 13-15 December 2015, Bayview Hotel, Langkawi, Kedah, Malaysia.

28. Chairman of Session; The 5th International Conference on Solid State Science and Technology (ICSSST 2015), 13-15 December 2015, Bayview Hotel, Langkawi, Kedah, Malaysia.

29. Invited Speaker; UPM-KYUTECH MSSC Seminar, International Research Collaboration, Faculty of Biotechnology and Biomolecular Sciences, UPM, 5-6 March 2015.

30. Research Collaborator; Hydroxyapatite and novel ceramics growth on suitable substrates, Department of Physics, Bilkent University, 06800 Çankaya, Ankara, TURKEY, 26 May 2015-10 June 2015: Contact Person: Prof. Dr. Oguz Gulseren.

31. Research Collaborator; Nanoelectronics and Energy Efficient Materials Research Group, Department of Electric-Electronics, Ataturk University, 25240 Erzurum TURKEY, 26 May 2015-10 June 2015: Contact Person: Prof. Dr. Mehmet ERTUGRUL.

32. Chairman of Session, 28th Regional Conference on Solid State Science & Technology (RCSSST28), Copthorne, Cameron Highlands, Pahang, Malaysia, 25-27 November 2014.

33. Fasilitator, International Workshop on Instrumentation Science and Technology (iWIST2014), Faculty of Science, Universiti Putra Malaysia, 5-30 Mei 2014.

34. Speaker, International Workshop on Instrumentation Science and Technology (iWIST2014), Faculty of Science, Universiti Putra Malaysia, 5-30 Mei 2014.

35. Chairman of Session, The 9th Nanoscience and Nanotechnology Conference (NanoTR-9), Atatürk University, Erzurum, TURKEY, June 24-28, 2013.

36. Invited Speaker; The 9th Nanoscience and Nanotechnology Conference (NanoTR-9), Atatürk University, Erzurum, TURKEY, June 24-28, 2013.

4

37. Chairman of Committee Members, Technical and Logistics of the Seventh International Conference on Magnetic and Superconducting Materials (MSM11) Avillion, Port Dickson, Negeri Sembilan, Malaysia, 10-13 October 2011.

38. Committee Member, Conference on Advance Materials and Nanotechnology 2009 in conjuction with International Advanced Technology Congress (ATCi 2009), PWTC, Kuala Lumpur, 3-5 November 2009.

39. Chairman of Session, Conference on Advance Materials and Nanotechnology 2009 in conjuction with International Advanced Technology Congress (ATCi 2009), PWTC, Kuala Lumpur, 3-5 November 2009.

40. Chairman, Technical and Logistics Committee for 24th Regional Conference on Solid State Science & Technology (RCSST 2008), Port Dickson, Negeri Sembilan, Malaysia, 30 Nov 2008 - 2 Dec 2008.

41. Chairman of Session, 24th Regional Conference on Solid State Science & Technology (RCSST 2008), Port Dickson, Negeri Sembilan, Malaysia, 30 Nov.- 2 Dec 2008.

42. Committee Member (Session Chair), IX Conference and Exhibition of the European Ceramics Society, 19–23 June 2005

43. Secretary; Association of Malaysian Graduates Sheffield, United Kingdom, 2003-2004 At National Level

1. Chairman of Technical Committee 2, Preliminary Index Assessment Meeting (Physics Form 5), Publication Form Standard School Curriculum Textbook Publication Package for Supply from 2020 (Utilization Beginning 2021), Ipoh, 10-19 February 2020.

2. Collaborator, "NANO-PFTF: A waste-to-wealth approach for high performance photocatalytic industrial wastewater treatment", Ministry of Energy, Science, Technology, Environment & Climate Change (MESTECC), 21-23 February 2019.

3. Question makers, "National nanotechnology olympiad competition (ONM)", Dewan MESTECC, Aras 4, Blok C&, Kompleks C, Presint 1, 26-27 June 2019.

4. Scientific committee, "National nanotechnology olympiad competition (ONM)", Dewan MESTECC, Aras 4, Blok C&, Kompleks C, Presint 1, 26-27 June 2019.

5. Examiner, “Revision and final proof reading of question papers, subject Physics (DF035) and Physics 2”, 4 January 2019, Bilik Mesyuarat Nipah, Aras 7, Bahagian Matrikulasi, Putrajaya.

6. Member of Vetting Panel, Peperiksaan Semester Program Matrikulasi (PSPM) subject Physics, Ministry of Education Malaysia, 26 February 2019-1 Mac 2019, Bilik Perbincangan, Aras G, Bangunan Mustapha Kamal, Cyberjaya.

7. Chairman of Technical Evaluation Committee 4, Workshop on Improvement of Proof pages, Textbook Publishing Program for Standard Curriculum of Secondary School Form 4 (Additional Science). Supply from 2019 (For Use Beginning in 2020). 1-6 April 2019, Hotel Hotel Dynasty, Kuala Lumpur.

8. Chairman of Technical Evaluation Committee 4, Meeting on Assessment of Proof pages, Textbook Publishing Program for Standard Curriculum of Secondary School Form 4 (Additional Science). Supply from 2019 (For Use Beginning in 2020). 13-18 May 2019, Hotel Acappella Suites, Shah Alam, Selangor.

9. Panel, Pertandingan Olympiad Nanoteknologi Malaysia Peringkat Kebangsaan (ONM 2019), 17-22 September 2019, RHR Hotel @UNITEN, Kajang, Selangor.

10. Thesis examiner, "Corrosion and Microbial Inhibition of Local Herb (Andrographis Paniculata) on Steel in Seawater” Maria Fazira Binti Mohd Fekeri (P3352), Universiti Malaysia Terengganu, 21030 Kuala Nerus, Terengganu, Malaysia

5

11. Chairman of Technical Evaluation Committee 4, Camera Ready Script Review Workshop, Textbook Publishing Program for Standard Curriculum of Secondary School Form 4 (Science). Supply from 2019 (For Use Beginning in 2020). 26-31 August 2019, Hotel Avillion Legacy Melaka, Melaka.

12. Thesis examiner, "Production of Zinc Iron Phosphate Glasses by Microwave and Conventional Processing Methods” Nur Hazeeqah Binti Mohd Farhadi (GW160054), Universiti Tun Hussein Onn Malaysia, Johor, Malaysia

13. Panel, review and final proof reading, Question papers Physics (DF035) and Physics 2 (DP024), Semester Examination Matriculation Program (PSPM), Ministry of Education Malaysia, 4 January 2019, Bilik Mesyuarat Nipah, Aras 7, Bahagian Matrikulasi, Putrajaya.

14. Head of Examining, Semester Examination Matriculation Program (PSPM), Ministry of Education Malaysia, Physics (DF045), Sesi 2018/2019, 15-22 April 2019, Ancasa Hotel & Spa, Kuala Lumpur.

15. Sample Script Selection Panel, Semester Examination Matriculation Program (PSPM), Ministry of Education Malaysia, Physics (DP024) & Physics (DF045), 11-12 April 2019, Bilik Mesyuarat Nipah, Aras 7, Bahagian Matrikulasi, Putrajaya.

16. Committee, Certification and Setting of Boundary Scores, Semester Examination Matriculation Program (PSPM), Ministry of Education Malaysia, Physics (DF045), 7 May 2019, Bahagian Matrikulasi, Aras 7, Blok E15, Putrajaya.

17. Thesis examiner, "Electrokinetic Remediation of Heavy Metal of River water", Zaidatul Aslamiyah Tumijan, Universiti Teknologi Malaysia, Johor Bahru, Malaysia

18. Thesis examiner, " Effects of Mixed Glass Former on AC Conductivity, Dielectric and Optical Properties of 70[xTeO2 + (1-x)B2O3] + 15Na2O + 15K2O Glasses” Shima Asyurah Binti Shuhaimi (2016357953), Universiti Teknologi Mara, Shah Alam, Selangor Darul Ehsan, Malaysia

19. Panel, review and final proof reading, Question papers Physics 1 (DP014), Semester Examination Matriculation Program (PSPM), Ministry of Education Malaysia, 24 June 2019, Bilik Mesyuarat Nipah, Aras 7, Bahagian Matrikulasi, Putrajaya.

20. Jury, "National nanotechnology olympiad competition (ONM)", Dewan MESTECC, Aras 4, Blok C&, Kompleks C, Presint 1, 26-27 June 2019.

21. Invited Speaker, Seminar Kolaborasi Penyelidikan UPM-UMT, Universiti Malaysia Terengganu, Terengganu, 22-23 July 2019.

22. Judge, "Materials Technology Challenges (MTC2019)”, UPM Serdang, 27th March 2019. 23. Invited Speaker, “Identification of Potent Electromagnetic Wave Absorption Mechanism

for Anti-Radar and Anti-Infrared Coating Materials”, Symposium on Vehicle Structure, Materials and Systems 2018, Palm Garden Hotel, Putrajaya, Malaysia, 15th November 2018.

24. Chairman, Symposium on Vehicle Structure, Materials and Systems 2018, Palm Garden Hotel, Putrajaya, Malaysia, 15th November 2018.

25. Assessment Panel, Conversion for Postgraduate Students Faculty of Science from AS759 to AS950, Bilik Mesyuarat Siswazah, Tingkat 5, Blok C, Fakulti Sains Gunaan, UiTM Shah Alam, 19 November 2018.

26. Advisor/Judge/ Committee Member, Noble Laureate’s Outreach Camp (NLOC) 2018-Scientist of Tomorrow, Universiti Putra Malaysia, 27-30 August 2018.

27. Academic Members on Academic Program Review Committee, Sarjana Muda Pendidikan (Fizik) dengan Kepujian, Fakulti Sains dan Matematik, Universiti Pendidikan Sultan Idris, Tanjung Malim, Perak.

28. Jury, Nanotechnology Innovative Research Project Competition (PIN), National Nanotechnology Center, Technology Park, Bukit Jalil, Kuala Lumpur, 8 Oktober 2018.

6

29. Mentor, Olympiad Nanotechnologi Malaysia (ONM) Competition 2018, MIMOS BERHAD, Bukit Jalil, Kuala Lumpur, 22-26 Oktober 2018

30. Program Assessment Panel, Student Assessment Center (SAC) for the Excellent Student Program (PPC) sponsored by the Public Service Department (JPA) year 2018, Dewan Tun Abdul Razak, lnstitut Kemajuan Desa (INFRA), Kementerian Kemajuan Luar Bandar dan Wilayah (KKLW), Kajang, Selangor, 6- 9 Ogos 2018.

31. Head of Examining Group, Semester Examination Matriculation Program (PSPM), Ministry of Education Malaysia, Physics 1 (SP015), Sesi 2018/2019, 27 Oktober 2018 to 3 November 2018, Hotel Eastin, Petaling Jaya, Selangor.

32. Head of Vetting Panel, Semester Examination Matriculation Program (PSPM), Ministry of Education Malaysia, Physics Question, 25-28 September 2018, Bangunan Mustapha Kamal, Cyberjaya.

33. Member of Vetting Panel, Peperiksaan Semester Program Matrikulasi (PSPM), Ministry of Education Malaysia, 2-5 Oktober 2018, Bilik Perbincangan, Aras 1, Bangunan Mustapha Kamal, Cyberjaya.

34. Chairman of Technical Assessment Committee 4, The Prototype Corrective Revision Workshop Series 1 Publication of Interactive Digital Text Books for the Secondary School Standard Curriculum (KSSM) Form 1 for Supply 2018 by Quotation Method, 23-27 July 2018, Bilik Mesyuarat SriTun Perak, Bahagian Buku Teks, Aras 2, Blok E15, Kompleks E, Pusat Pentadbiran Kerajaan Persekutuan, 62604 PUTRAJAYA.

35. Examiner, revision and final proof reading of Physics subject question papers (DP014), 31 Julai 2018, Bilik Mesyuarat Nipah, Aras 7, Bahagian Matrikulasi, Putrajaya.

36. Assessment Panel, Conversion for Postgraduate Students Faculty of Science from AS759 to AS950, Bilik Mesyuarat Siswazah, Tingkat 5, Blok C, Fakulti Sains Gunaan, UiTM Shah Alam, 16 Mei 2018.

37. Committee Members, Manuskrip Assessment in the 18th Graduate Colloquium, 4-6 April 2018, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 UKM Bangi, Selangor.

38. Member of Vetting Panel, Peperiksaan Semester Program Matrikulasi (PSPM), Ministry of Education Malaysia, 27 February-2 Mac 2018, Bilik Perbincangan, Aras 1, Bangunan Mustapha Kamal, Cyberjaya.

39. Head of Examining Group, Semester Examination Matriculation Program (PSPM), Ministry of Education Malaysia, Fizik PST Semester II, Sesi 2016/2017, 11-18 Mei 2018, Crystal Crown Hotel Petaling Jaya, Petaling Jaya, Selangor.

40. Judge, 4th International Inovation, Design and Articulation (i-IDeATM 2018), 24-26 April 2018, Universiti Teknologi MARA, Perlis Branch, Arau Campus, Perlis, MALAYSIA

41. Member of Vetting Panel, Peperiksaan Semester Program Matrikulasi (PSPM), Ministry of Education Malaysia, 27-30 Mac 2018, Bangunan Galeria, Jabatan Peguam Negara, Putrajaya, Putrajaya.

42. Examination Question Maker, Physics Question Semester I (DF015), Peperiksaan Semester Program Matrikulasi (PSPM), Ministry of Education Malaysia, 2018

43. Chairman of Technical Evaluation Committee 2, Meeting on Assessment of Proof pages, Textbook Publishing Program for Standard Curriculum of Secondary School Form 3 Supply from 2018 (For Use Beginning in 2019).

44. Mentor, PERMATA STEM, Pusat PERMATA STEM Talent, Nur Syazana Natasha Binti Hisham, University of California at Davis, University College London.

45. Chairman, Symposium on Vehicle Structure, Materials and Systems 2017, 7-8 February 2017, The Everly, Putrajaya.

7

46. Committee Member, 17th Graduate Colloquium Manuscript Assessor, Fakulti Sains Dan Teknologi, Universiti Kebangsaan Malaysia, 43600 UKM Bangi, Selangor Darul Ehsan Malaysia, 12 dan 13 Julai 2017.

47. Vice-Chairman, Workshop on Advanced Ceramic Materials (WoACM 2017), Universiti Putra Malaysia, 10-28 April 2017.

48. Invited Speaker, Workshop on Advanced Ceramic Materials (WoACM 2017), Universiti Putra Malaysia, 10-28 April 2017.

49. Invited Speaker, “Anti-radar and anti-infrared coating materials: an overview”, Symposium on Vehicle Structure, Materials and Systems 2017, The Everly, Putrajaya, 7-8 February 2017.

50. Interview Panel, Federal Training Gift Program and Fully Paid Study Leave without Scholarship by Public Service Department for 2018 Session, Institut Kemajuan Desa (INFRA), Lot 2A, Persiaran lnstitusi, 43000 KAJANG, 27-29 September 2017.

51. Program Assessment Panel, Student Assessment Center (SAC) for the Excellent Student Program (PPC) sponsored by the Public Service Department (JPA) year 2017, Aras 4, Blok C3, Kompleks C (Bilik 3), Jabatan Perkhidmatan Awam, 62510 W.P Putrajaya, 7-9 Ogos 2017.

52. Question Making Panel, National Level Nano-Olympic Questioner, Bilik Seminar, Tingkat 2, MIMOS BERHAD, Technology Park Malaysia, 57000 Kuala Lumpur, Malaysia, 3-4 Julai 2017.

53. Question Refinement Panel, Assessor for Nano-Olimpiade Questions for 2017, Bilik Mesyuarat G207, Bangunan Penyelidikan, Jaringan Industri, Masyarakat & Alumni (PJIA&M), UiTM Perlis, 02600 Arau, Perlis, 26 Julai 2017.

54. Jury, Malaysia National Nanotechnology Olympiad Competition (ONM 2017), Resources Center, Technology Park Malaysia, Bukit Jalil, 57000 Kuala Lumpur, Malaysia, 9-13 October 2017.

55. Jury Panel, MYSO-RMC Conference for Young Scientists 2017, 31 Mac 2017, Auditiorium Maktab Tentera Diraja, Maktab Tentera Diraja, Kem Sungai Besi, 57000 Kuala Lumpur.

56. Head of Examining Group, Semester Examination Matriculation Program (PSPM), Ministry of Education Malaysia, Fizik PST Semester II, Sesi 2016/2017, 13-20 April 2017, Acappella Suite Hotel, Shah Alam, Selangor.

57. Head of Examining Group, Semester Examination Matriculation Program (PSPM), Ministry of Education Malaysia, Fizik PST Semester I, Sesi 2017/2018, 22-28 November 2017, Acappella Suite Hotel, Shah Alam, Selangor.

58. Advisor, Kuala Lumpur Engineering Science Fair 2017 (KLESF 2017), The Mines International Exhibition and Convention Centre (MIECC), Mines Resort City, Sri Kembangan 43300, Malaysia, 3-5 November 2017.

59. Members of Technical Committee on Fine Ceramics, IKM/ISC-B/TC14 (ISO/TC 206 FINE CERAMICS) Institute Kimia Malaysia.

60. Member of Vetting Panel, Semester Examination of Two-Year Matriculation Program (PDT), Ministry of Education Malaysia, 8-10 Mac 2016, Bahagian Matrikulasi, Aras 6 & 7, Blok E15, Putrajaya.

61. Member of Vetting Panel, Semester Examination Matriculation Program (PSPM), Ministry of Education Malaysia, Fizik PST Semester I (SF016), Ministry of Education Malaysia, 5-7 April 2016, Bahagian Matrikulasi, Aras 6 & 7, Blok E15, Putrajaya.

8

62. Chairman of Technical Committee 2, Preliminary Index Assessment Meeting (Science Subjects), Publication Form Standard School Curriculum Textbook Publication Package for Supply from 2016 (Utilization Beginning 2017), Ipoh, 18-27 April 2016.

63. Executive Council Member (EXCO); Malaysian Solid-State Science and Technology Society (MASS), Sesi 2016/2018.

64. Member of Vetting Panel, Semester Examination of Two-Year Matriculation Program (PDT), Ministry of Education Malaysia, 2-4 Ogos 2016, Bahagian Matrikulasi, Aras 6 & 7, Blok E15, Putrajaya.

65. Examiner of Answer Script, Semester Examination Matriculation Program (PSPM), Ministry of Education Malaysia, Fizik PST Semester I, Sesi 2016/2017, 24-29 November 2016, Acappella Suite Hotel, Shah Alam, Selangor.

66. Head of Examining Group, Semester Examination Matriculation Program (PSPM), Ministry of Education Malaysia, Fizik PST Semester I, Sesi 2016/2017, 23-30 November 2016, Acappella Suite Hotel, Shah Alam, Selangor.

67. Judges, Workshop of Advanced Materials and Nanotechnology (WAMN 2016), 24-25 August 2016, The Everly, Putrajaya.

68. Advisor, Noble Laureate’s Outreach Camp (NLOC) 2016-Scientist of Tomorrow, Universiti Putra Malaysia, 9-12 August 2016.

69. Advisor/Judge/ Committee Member, Noble Laureate’s Outreach Camp (NLOC) 2015-Scientist of Tomorrow, Universiti Putra Malaysia, 17-20 August 2015.

70. Examiner of Answer Script, Semester Examination Matriculation Program (PSPM), Ministry of Education Malaysia, Fizik PST Semester II, Sesi 2014/2015, 4-9 Mei 2015, Ancasa Hotel & Spa, Kuala Lumpur.

71. Examiner of Answer Script, Semester Examination Matriculation Program (PSPM), Ministry of Education Malaysia, Fizik PST Semester I, Sesi 2015/2016, 11-16 November 2015, Ancasa Hotel & Spa, Kuala Lumpur.

72. Member of Vetting Panel, Semester Examination Matriculation Program (PSPM), Ministry of Education Malaysia, Physics Question Semester 1 (TF015), 29 September 2015-2 Oktober 2015, Corus Paradise Resort, Port Dikson.

73. Interview Panel, Federal Training Gift Program and Full-Leave Study Leave Without Scholarship for 2015 Session, Akedemi Latihan Pertahanan Awam (ALPHA), Jabatan Perkhidmatan Awam, 5 November 2014.

74. Chairman of 3P(6Ali), Sekolah Rendah Islam ABIM, Sungai Ramal Dalam, Kajang, 2014. 75. Head of Research Collaborator; UPM and C.M.E. Industrial Automation Sdn. Bhd. on

Development of technology related to Friction Stir Welding. Output: USD 10000.00 (inkind) from CME, 1 NDA, 2 PhD, 1 master and 2 UG (Final Year projects) graduated and 10 journal papers published.

76. Jury Panel, Design Competitions (Young Scientist Category), “Malaysia Innovation Expo” (MIEXPO) National Level 2013, Dewan Banquet UPM, 26-28 September 2013.

77. Member/Consultant, Technical Assessment Panel for MiGHT Technology Nurturing (Biotechnology and Biotech industry cluster), March 2013-February 2014.

78. Technical Assessment Member, The Innovative Fire, Heat & Sound Insulation, VatraTech Solution Sdn. Bhd., No. 6, Jln Tiaj 2/9, Taman Industri Alam Jaya, 42300Bandar Puncak Alam, Selangor Darul Ehsan, Malaysia, 4 March 2013.

79. Fasilitator, Innovative Leadership and Transformation Leadership Development Program 2013 (South Zone), Anjuran bersama UTeM-AKEPT, 2013.

80. Chairman of Technical Evaluation Committee 2, Science Textbook Form 5 for Secondary School (KBSM), Supply from 2012 (For Use Beginning in 2013), Textbook Division,

9

Ministry of Education Malaysia, Mahkota Hotel Melaka, No. 16, Jalan Syed Abdul Aziz, 75000 Melaka, 1-10 March 2012.

81. Chairman of Technical Evaluation Committee 4 (Readers script of Camera Ready), Textbook Publication Program through Direct Consultation Methods Starting for year 2013, Form 5 Additional Science Subjects, Textbook Division, Ministry of Education Malaysia, Corus Paradise Resort, Port Dickson, Negeri Sembilan, 9-14 Julai 2012.

82. Chairman of Technical Evaluation Committee 4, Meeting of Correction Check for 100% Correction Proof, Textbook Publication Program Through Direct Consultation Methods Starting 2013, Additional Science Subjects for Form 5, Textbook Division, Ministry of Education Malaysia, Hotel De Palma Ampang, Selangor, 30 Julai 2012-3 Ogos 2012.

83. Judge, Pertandingan Reka cipta, Penyelidikan dan Inovasi (PRPI) Sekolah Malaysia Peringkat Kebangsaan, 2012.

84. Jury Panel, L’oreal Young Scientist Carnival 2012 in Science Innovation and Invention Competition among High Performance/Cluster Schools, Selangor, 2012.

85. Fasilitator, Innovative Leadership and Transformation Leadership Development Program 2011 (South Zone), Anjuran bersama UTeM-AKEPT, The Regency Tanjung Tuan Beach Resort, Port Dickson, Negeri Sembilan, 25-27 November 2011.

86. Researcher, Implementation of My3S Instrument, Department of Higher Education Malaysia, (Academic Development Management Division), 2010.

87. Consultant, Implementation of My3S Instrument, Organized by the Department of Higher Education Malaysia, (Academic Development Management Division) at Universiti Darul Iman Malaysia (UDM) dan Universiti Malaysia Terengganu (UMT), 24-25/2/2010.

At University Level

1. Master committee member, UPM STEM, 24 October 2018-23 October 2020. 2. Supervisor, Teaching and Internship (LMI), Second Semester 2017/2018, 19 Feb. 2018- 10

Ogos 2018 3. Committee Member; Evaluation Application of Research Grant Scheme at University

Level for Year 2018-2019. 4. Deputy Chairman; Noble Laureate’s Outreach Camp (NLOC) 2018-Scientist of Tomorrow,

Universiti Putra Malaysia, 27-30 August 2018. 5. Lecturer Advisors; Noble Laureate’s Outreach Camp (NLOC) 2018-Scientist of Tomorrow,

Universiti Putra Malaysia, 27-30 August 2018. 6. Supervisor; Post Doctoral Researcher (Dr. Idza Riati Binti Ibrahim), “Identification of

Potent Electromagnetic-Wave Absorption Mechanisms for Anti-Radar and Anti-Infrared Coating Materials Applications”, Universiti Putra Malaysia, 2018-2020.

7. Speaker, At Program "1 College 1 School 1 Village", SMK Dato Harun, Tanjung Karang, Selangor, 19 August 2017.

8. Supervisor, Teaching and Internship (LMI), Second Semester 2016/2017, 8 Mei 2017-18 Ogos 2017

9. Supervisor; Post Doctoral Researcher (Dr. Fadzidah Binti Mohd Idris), “Identification of Potent Electromagnetic-Wave Absorption Mechanisms for Anti-Radar and Anti-Infrared Coating Materials Applications”, Universiti Putra Malaysia, 2017-2018.

10. Committee Member; Evaluation Application of Research Grant Scheme at University Level for Year 2016 and 2017.

11. Supervisor; Post Doctoral Researcher (Dr. Mohd Hafiz Bin Mohd Zaid), “Identification of Potent Electromagnetic-Wave Absorption Mechanisms for Anti-Radar and Anti-Infrared Coating Materials Applications”, Universiti Putra Malaysia, 2016-2017.

10

12. University Evaluation Panel, For Study Program, Universiti Putra Malaysia, 01 September 2014-30 Ogos 2016.

13. Committee Member; Evaluation Application of Research Grant Scheme at University Level for Year 2015.

14. Invited Speaker; UPM-KYUTECH MSSC Seminar, International Research Collaboration, Faculty of Biotechnology and Biomolecular Sciences, UPM, 5-6 March 2015.

15. Auditor, Laboratory Tour for Divisional Laboratory Assistant Course for Session 2014/2016, 2014.

16. Committee Member; Nobel Laureate’s Outreach Camp 2015, Universiti Putra Malaysia, 7-20 August 2015.

17. Judge; Nobel Laureate’s Outreach Camp 2015, Universiti Putra Malaysia, 7-20 August 2015.

18. Advisor; Nobel Laureate’s Outreach Camp 2015, Universiti Putra Malaysia, 7-20 August 2015.

19. Supervisor; Post Doctoral Researcher (Dr. LimWay Foong), “Application of Glass Reinforced Hydroxyapatite Composite in the Tissue Engineering Scaffolds”, Universiti Putra Malaysia, 2014-2015.

20. Internal Auditors, UPM Graduate Program Review, 2014 21. Auditor, Laboratory Tour for Transition Course of Laboratory Assistant, Session

2014/2016. 22. Interviewer Panel, Entry of New Students Bachelor of Education and Bachelor of Science

with Education (Hons) For 2014/2015 intake, 2014. 23. Cokmar Carrier, Majlis Konvokesyen UPM ke-38 Tahun 2014. 24. Evaluator, Master Pengurusan Teknologi Alam Sekitar, 2014 25. Evaluator, Master Pengurusan Air, 2014 26. Evaluator, Master Penderiaan Jauh dan GIS, 2014 27. Evaluator, Master Kejuruteraan Alam Sekitar, 2014 28. Committee Member, UPM's 37th Convocation Ceremony and UPM Convocation &

Agriculture Expo, 25-30 Oktober 2013. 29. Interviewer Panel, Bachelor of Education (ISMP) Program for 2013/2014 intake, 28 Mei

2013. 30. Internal Auditors, UPM Graduate Program Review, 2013 31. Advisor/Judge/Committee Member, Nobel Laureate Outreach Camp 2012. “Scientists of

Tomorrow”, Universiti Putra Malaysia, 2-5 July 2012. 32. Evaluator, Program Master Kejuruteraan Alam Sekitar (PG09), 2012 33. University Evaluation Panel, For Study Program, Universiti Putra Malaysia, 01 April

2011-31 Mac 2013. 34. Judge, Project Design and Product Development Course (EDU 3443) Semester 2

2010/2011. 35. Evaluator, Master Kejuruteraan Alam Sekitar, 2011 36. Evaluator, Program Bachelor Food Science & Technology (PG09), 2011 37. Assessor, Laboratory Session Tour for Laboratory Subjects Laboratory Transfer Course

Laboratory Assistant 2010/2011 Session. 38. Internal Auditor, Monitoring of Data and Supporting Documents in Research University

(RU), 2010 39. Cokmar Carrier, 32th UPM Convocation Ceremony in 2008. 40. Supervisor, Teaching Practice and Practicum Counseling Semester 2 2007/2008. 41. Committee Member & Jury, Tunas Putra Quiz 2008, 2008

11

42. Advisor, Kelab Fizik UPM, 2007 – 2011 43. Associate Researcher, Institut Teknologi Maju, 2007-date. 44. Fellow, Kolej Kediaman Matrikulasi UPM, 1997-1999.

At Institute (ITMA) Level

1. Approved Signatory, MS ISO/IEC 17025, Institut Teknologi Maju, Universiti Putra Malaysia, 2 January 2018-31 Desember 2020.

2. Poster Assessor, Workshop on Advance Materials and Nanotechnology 2016 (WAMN2016), The Everly, Putrajaya, Malaysia, 24-25 August 2016.

3. Committee Member, Workshop on Advance Materials and Nanotechnology 2016 (WAMN2016), The Everly, Putrajaya, Malaysia, 24-25 August 2016.

4. Committee Member, Technical and Quotation, Institut Teknologi Maju, Universiti Putra Malaysia, 4 January 2016-31 Disember 2017.

5. Member, Emergency Response Team (ERT), Institut Teknologi Maju, Universiti Putra Malaysia, 2 January 2016-31 Disember 2016.

6. Committee Member, Technical and Quotation, Institut Teknologi Maju, Universiti Putra Malaysia, 1 Julai 2015-31 Disember 2015.

7. Grant Evaluation Panel, Institut Teknologi Maju, Universiti Putra Malaysia, 9 Mei 2015-18 August 2016.

8. Approved Signatory, MS ISO/IEC 17025, Institut Teknologi Maju, Universiti Putra Malaysia, 1 Februari 2014-18 August 2016.

9. Technical Manager, MS ISO/IEC 17025, Institut Teknologi Maju, Universiti Putra Malaysia, 1 Februari 2014-18 August 2016.

10. Supervisor; Visiting Researcher, Dr. Mohd Sabri Mohd Ghazali, School of Fundamental Science, Universiti Malaysia Terengganu, Terengganu Darul Iman, Mac 2015-Ogos 2015.

11. Chairman, Occupational Safety and Health Committee, Institut Teknologi Maju, 12 Mei 2015- 31 Disembers 2016.

12. Chairman, Maintenance and Development Committee, Institut Teknologi Maju, 11 Ogos 2015- 31 Disember 2016.

13. Committee Member, Technical and Quotation, Institut Teknologi Maju, Universiti Putra Malaysia, 21 Mei 2012-31 Desember 2015

14. Emcee, Putra Colloquium on Nanomedicine 2014 (PUTRACON-2014), Institute of Advanced Technology, Universiti Putra Malaysia, 8 April 2014.

15. Committee Member, Putra Colloquium on Nanomedicine 2014 (PUTRACON-2014), Institute of Advanced Technology, Universiti Putra Malaysia, 8 April 2014.

16. Poster Assessor, Workshop on Advance Materials and Nanotechnology 2014 (WAMN2014), Institute of Advanced Technology, Universiti Putra Malaysia, 25-26 Ogos 2014.

17. Committee Member, Workshop on Advance Materials and Nanotechnology 2013 (WAMN2013), Institute of Advanced Technology, Universiti Putra Malaysia, 10-11 September 2013.

18. Evaluation Panel, Grant Assessment Panel at the Advanced Technology Institute, Universiti Putra Malaysia, 2012-2016

19. Member, Advanced Technology Institute Management Meeting, Universiti Putra Malaysia, 2012- 2016

At Faculty Level

1. Chairman, Calibration Committee Faculty of Science, 9 January 2019-8 January 2021.

12

2. Chairman, Trust Fund Committee Faculty of Science, 9 January 2019-8 January 2021. 3. Chairman, Utility savings Committee Faculty of Science, 9 January 2019-8 January 2021. 4. Visiting Lecturer, Physics Industrial Training (PHY4901), 2019. 5. Visiting Lecturer, Physics Industrial Training (PHY4901), 2018. 6. Visiting Lecturer, Physics Industrial Training (PHY4901), 2017. 7. Speaker, Program Laboratory Safety Course (LSC) 2017, Fakulti Sains, Universiti Putra

Malaysia, 25-27 September 2017. 8. Visiting Lecturer, Physics Industrial Training (PHY4901), 2017. 9. Visiting Lecturer, Physics Industrial Training (PHY4901), 25 July 2016-28 Ogos 2016. 10. Calibration Committee Chairman, Fakulti Sains, Universiti Putra Malaysia, 19 Ogos

2016-date. 11. Proposal/Extended Abstract/Presentation Committee, Fundamental Science Congress

2016, Fakulti Sains, Universiti Putra Malaysia, 2016. 12. Program advisor, UPM-STEM-The Kuala Lumpur: Engineering Science Fair (KLESF);

The Mines International Exhibation and Convention Centre (MIECC), 4-6 November 2016. 13. Chairman of the Session, Fundamental Science Congress 2016, 9-10 August 2016. 14. Committee Members, Proposal/extended Abstract/Presentation, Fundamental Science

Congress 2016, 2016. 15. Visiting Lecturer, Physics Industrial Training (PHY4901), 29 Jun 2015-30 Ogos 2015. 16. Representative of Physics Department, Al-Biruni Club's Student Monitoring and Guidance

Program, Fakulti Sains, Universiti Putra Malaysia, 2014-2015. 17. Visiting Lecturer, Physics Industrial Training (PHY4901), 2014. 18. Committee Members, Program Intervensi TIMMS 2014, Faculty of Science, Universiti

Putra Malaysia, 2014. 19. Visiting Lecturer, Physics Industrial Training (PHY4901), 2013. 20. Advisory Lecturer, Program Nobel Laureates Outreach Camp (NLOC) 2013- ‘Scientists of

Tomorrow’, 2013. 21. Committee Members, Technical and Audio Visual, Program Nobel Laureates Outreach

Camp (NLOC) 2013- ‘Scientists of Tomorrow’, 2013. 22. Visiting Lecturer, Physics Industrial Training (PHY4901), 2012 23. Committee Members, Workshop on Key Performance Indicators (KPI) Faculty of Science

2012, 2012 24. Booth of Faculty of Science Officer, Asasi Education Fair 2012, 2012 25. Advisory Lecturer, Noble Laureate’s Outreach Camp-Scientist of Tomorrow, 2012 26. Committee Members, (Technical and Audio Visual), Noble Laureate’s Outreach Camp-

Scientist of Tomorrow, 2012 27. Committee Members, Noble Laureate’s Outreach Camp-Scientist of Tomorrow, 2012 28. Oral Judges, Fundamental Science Congress 2012, 2012 29. Chairman of the Session, Fundamental Science Congress 2012, 2012 30. Committee Members, The Fundamental Science Congress 2012, Fakulti sains, 2012 31. Visiting Lecturer, Physics Industrial Training (PHY4901), 2011 32. Committee Members, The Fundamental Science Congress 2011, Fakulti sains, 2011 33. Chairman of the Session, Fundamental Science Congress 2011, 5-7 Julai 2011 34. Visiting Lecturer, Physics Industrial Training (PHY4901), 2011 35. Development Coordinator, Faculty of Science, Universiti Putra Malaysia, 1 Julai 2011-15

Februari 2012. 36. Committee Members, Industry and Community Networks, Faculty of Science, 2011 – date 37. Visiting Lecturer, Physics Industrial Training (PHY4901), 2010

13

38. Chairman, Majlis Malam Gemilang Sains, Fakulti Sains 2010, 2010 39. Lead and Internal Auditor, Independent Audit Faculty of Science for The Scope of

Support Management, Undergraduate, Graduate Studies and Commercial Research and Development, 2010

40. Judge, Pertandingan Sepanduk Majlis Maulidur Rasul 1431H/2010M Peringkat Fakulti Sains, 5 Mac 2010.

41. Committee Members, Majlis Maulidur Rasul 1431H/2010M Peringkat Fakulti Sains, 2010. 42. Chairman, Kelab Tunas Saintis Muda (Junior), Faculty of Science, 2010-2011 43. Exhibitors Committee, Ekspo Pertanian dan Pesta Konvokesyen 2010 (Peringkat Fakulti

Sains), 2010 44. Chairman, Ahli Jawatankuasa pelaksana Hebat Sains 2010, 2010 45. Committee Members, The Fundamental Science Congress 2009, 2009. 46. Poster Assessor, The Fundamental Science Congress 2009, 17-18 June 2009. 47. Committee Members, Alumni Development Faculty of Science, Universiti Putra Malaysia,

1 Januari 2009-date. 48. Facilitator, PutraLMS 2.0 eLearning Training Program, Fakulti Sains, 23 Disember 2009. 49. Facilitator, Quality Manual Refinement Workshop, Fakulti Sains, 2009. 50. Exhibition Officer, Postgraduate Promotion of Faculty of Science in conjunction with the

33rd UPM Convocation in 2009, 2009. 51. Visiting Lecturer, Physics Industrial Training (PHY4901), 2009 52. Lead and Internal Auditor, Internal Audit 1/2009, Faculty of Science, 14-15 July 2009 53. Master of Ceremony, Faculty of Science 2009 Convention, 2009. 54. Speaker / Facilitator, Strengthening the New Quality Assurance Committee (Transition),

2009. 55. Facilitator, Induction Workshop MS ISO 9001:2000 For New Staf, 10 Mac 2009 56. Visiting Lecturer, Physics Industrial Training (PHY4901), 2008 57. Master of Ceremony, Sambutan Pelancaran Bulan Kualiti (Q) Fakulti Sains 2008, 2008 58. Master of Ceremony, Faculty of Information Day: Session 2008/2009, 2008 59. Alumni Representative, Faculty of Science, 2008-date 60. Committee Members, Kem Gerak Ilmu Fizik 08/09, Dewan Kuliah Akademik Pusat, 20

Julai 2008. 61. Committee Members, Workshop on Implementation of Learning Outcomes and Soft Skills

in Teaching, 7 Ogos 2008. 62. Committee Members, Excellent Graduate Award Ceremony Faculty of Science 2008, 17

Oktober 2008. 63. Internal Auditor, Internal Audit Series 1/2008, Fakulti Sains, 2008 64. Deputy Internal Audit Coordinator, Faculty of Science, Universiti Putra Malaysia, 2007-

2008. 65. Committee Members, Induction Workshop MS ISO 9001:2000 for New and Existing

Internal Auditor, 29 February 2008. 66. Facilitator, Induction Workshop MS ISO 9001:2000 for New Staff, 18 February 2008. 67. Visiting Lecturer, Physics Industrial Training (PHY4901), 2007 68. Committee Members, Seminar Sains 2007, 4 August 2007 69. Committee Members, Workshop on Pemantapan Ilmu, Faculty of Science, 29 Julai 2007 70. Committee Members, Pameran Ekspo Tani Konvokesyen UPM 2007, Faculty of Science,

2007 71. Editor, Info Sains - Bulletin of Faculty of Science, 2007 – 2009 72. Committee Members, Occupational Safety and Health, Faculty of Science, 2007 – 2009

14

73. Internal Auditor, Quality Management System, Faculty of Science, 2007 – 2010 74. Deputy Coordinator Internal Audit, Quality Management System, Faculty of Science,

2007 – 2009 75. Committee Members, Penyemakan Kertas Soalan dan Skema Jawapan PHY 4204, Fakulti

Sains, 4 April 2007 76. Committee Members, Penyemakan Kertas Soalan dan Skema Jawapan PHY 3305, Fakulti

Sains, 4 April 2007 77. Member, Faculty's Student Academic Advisor, 2000 - to date

At Department Level

1. Forum Panelist, Bicarawara Fizik 360, Bilik Gerakan Fizik 360, Faculty of Science, 6 January 2012

2. Facilitator, PutraLMS 2.0 eLearning Training Program, Faculty of Science, 8 January 2010. 3. Committee Members, Majlis Gerak Ilmu Sesi 2010/2011, 25 July 2010 4. Committee Members, Penilai Kertas Soalan Peperiksaan Akhir Semester 2 2010/2011,

2010 5. Committee Members, Penyemakan Soalan dan Skema Jawapan Peperiksaan Akhir

Semester 1 2010/2011, 2010 6. Wakil Penyelaras Jabatan Fizik, Program Bulan Inovasi Faculty of Science 2010, 2010 7. Advisor, Kem Gerak Ilmu Fizik 2010/2011, Faculty of Science, 25 July 2010. 8. Pengerusi Majlis, Hari Penerangan Pelajar Jabatan Fizik Sesi 2010/2011, 8 Julai 2010 9. Ahli Jawatankuasa, Hari Penerangan Pelajar Jabatan Fizik Sesi 2010/2011, 2010 10. Pengerusi JK Teknikal dan Logistik, Majlis Jasamu Dikenang IIV, 27 April 2009 11. Committee Members, Seminar Alumni Fizik, 2009. 12. Committee Members, Majlis Gerak Ilmu Sesi 2009/2010, 2009 13. Committee Members, Sambutan Hari Raya Jabatan Fizik 2009, 2009. 14. Chairman, Bengkel Pemantapan Modal Insan Jabatan Fizik, 2009. 15. Pengacara Majlis, Hari Penerangan Jabatan Fizik Sesi 2009/2010, 1 Julai 2009 16. Presiden, Kelab Warga Fizik, 2008 – 2011 17. Facilitator, Internal Calibration Workshop Department of Physics, Faculty of Science,

UPM, 20-21 November 2008 18. Committee Members, Majlis Penerangan Jabatan Fizik, Semester 1 2008/2009, 2 July 2008 19. Assessor, Final Year Project, Semester 1 Session 2008/2009. 20. Committee Members, Majlis Jasamu Dikenang VI, 24 Julai 2008 21. Committee Members, Kem Gerak Ilmu Fizik 2008/2009, 20 July 2008 22. Committee Members, Department of Physics Information Day, Semester 1 Session

2008/2009, Dewan Kuliah A, 2 July 2008. 23. Committee Members, Research Seminar Faculty of Science, 2007 24. Committee Members, Preparation of Internal Audit 2/2007 (Department of Physics), 4-5

September 2007 25. Committee Members, Preparation of Internal Audit 2/2007 (Department of Physics), 22-23

February 2007. 26. Facilitator, Physics Department Calibration Workshop, Faculty of Science, UPM, 17-18

Mei 2007 27. Sub Committee Members, Quality Day, Faculty of Science, 22 Disember 2007, Inter

departmental competition, 2007 28. Committee Members, KWF Family day 2007, Physics Department, Faculty of Science,

2007

15

29. Committee Members, Academic Info Day 2007/2008, Department of Physics, 2007 30. Committee Members, Jawatan Kuasa ISO Jabatan, 2007 – 2012 31. Committee Members, Majlis Jasa mu Dikenang V, 2007 32. Advisor, Kem Gerak Ilmu Fizik 2007/2008, 2007 33. Advisor, Kelab Fizik UPM, 2007 – 2011

TEACHING EXPERIENCES

No Course Code Academic Year 1. General Physics PHY 2001 1 2000/2001 2. Mechanics and Wave PHY 3102 2 2006/2007 3. Final Year Project PHY 4999 2 2006/2007 4. Industrial Internship PHY 4901 2 2006/2007 5. General Physics PHY 2001 1 2007/2008 6. Materials Science PHY 4203 1 2007/2008 7. Final Year Project PHY 4999 1 2007/2008 8. Mini Project PHY 4997 1 2007/2008 9. Physics I PHY 3103 2 2007/2008 10. Materials Science PHY 4203 2 2007/2008 11. Final Year Project PHY 4999 2 2007/2008 12. Industrial Internship PHY 4901 2 2007/2008 13. Mini Project PHY 4997 2 2007/2008 14. General Physics PHY 2001 1 2008/2009 15. Materials Science PHY 4203 1 2008/2009 16. Final Year Project PHY 4999 1 2008/2009 17. Materials Science PHY 4203 2 2008/2009 18. Physics II PHY 3104 2 2008/2009 19. Final Year Project PHY 4999 2 2008/2009 20. Industrial Internship PHY 4901 2 2008/2009 21. Materials Science PHY 4203 1 2009/2010 22. Physics I PHY 3103 1 2009/2010 23. Final Year Project PHY 4999 1 2009/2010 24. Materials Science PHY 4203 2 2009/2010 25. Physics II PHY 3104 2 2009/2010 26. Final Year Project PHY 4999 2 2009/2010 27. Industrial Internship PHY 4901 2 2009/2010 28. Materials Science PHY 4203 1 2010/2011 29. Physics I PHY 3103 1 2010/2011 30. Final Year Project PHY 4999 1 2010/2011 31. Materials Science PHY 4203 2 2010/2011 32. Physics II PHY 3104 2 2010/2011 33. Final Year Project PHY 4999 2 2010/2011 34. Industrial Internship PHY 4901 2 2010/2011 35. Materials Science PHY 4203 1 2011/2012 36. Physics I PHY 3103 1 2011/2012 37. Materials Science PHY 4203 2 2011/2012 38. Physics II PHY 3104 2 2011/2012

16

39. Final Year Project PHY 4999 2 2011/2012 40. Industrial Internship PHY 4901 2 2011/2012 41. Materials Science PHY 4203 1 2012/2013 42. Final Year Project PHY 4999 1 2012/2013 43. Materials Science PHY 4203 2 2012/2013 44. Final Year Project PHY 4999 2 2012/2013 45. Industrial Internship PHY 4901 2 2012/2013 46. Materials Science PHY 4203 1 2013/2014 47. Final Year Project PHY 4999 1 2013/2014 48. Materials Science PHY 4203 2 2013/2014 49. Final Year Project PHY 4999 2 2013/2014 50. Industrial Internship PHY 4901 2 2013/2014 51. Analytical Methods of Structure and Microstructure PHY 4204 1 2014/2015 52. Final Year Project PHY 4999 1 2014/2015 53. Materials Science PHY 4203 2 2014/2015 54. Final Year Project PHY 4999 2 2014/2015 55. Industrial Internship PHY 4901 2 2014/2015 56. Materials Science PHY 4203 1 2015/2016 57. Final Year Project PHY 4999 1 2015/2016 58. Materials Science PHY 4203 2 2015/2016 59. Final Year Project PHY 4999 2 2015/2016 60. Industrial Internship PHY 4901 2 2015/2016 61. Materials Science PHY 4203 1 2016/2017 62. Final Year Project PHY 4999 1 2016/2017 63. Materials Science PHY 4203 2 2016/2017 64. Final Year Project PHY 4999 2 2016/2017 65. Industrial Internship PHY 4901 2 2016/2017 66. Materials Science PHY 4203 1 2017/2018 67. Final Year Project PHY 4999 1 2017/2018 68. Materials Science PHY 4203 2 2017/2018 69. Final Year Project PHY 4999 2 2017/2018 70. Industrial Internship PHY 4901 2 2017/2018 71. Master Proposal Seminar SPS 5903 Every Semester 72. Master’s Research SPS 5999 Every Semester

SUPERVISION OF POSTGRADUATE STUDENTS

Doctoral Degree: Chairman (graduated) 1. Farhad Gharavi, Corrosion Behavior of Friction Stir Welded Al 6061 Alloy Lap Joint

(graduated: 2014). 2. Farhad Ostovan, Reinforcing of Aluminum Matrix by CNTs and Nano Alumina Using

Powder Metallurgy Method (graduated: 2015). 3. Mohd Hafiz Bin Mohd Zaid, Structural, Optical and Photoluminescent Properties of

Willemite Based Glass Ceramic Doped Manganese Oxide (graduated: 2016). 4. Zarifah Hj Nadakkavil Alassan, Fabrication of Mesoporous Hydroxyapatite Based

Bioceramic Composite (graduated: 2016).

17

5. Idza Riati binti Ibrahim, Parallel Evolution of Microstructure, Thermophysical and Electrical Properties and Their Relationships Towards a Complete Polycrystalline Alumina and Yttria Stabilized Zirconia (graduated: 2017).

6. Firouz Fadaeifard, Mechanical, Microstructural and Ultrasonic Characterization of Aluminum Alloy 6061 Butt Welded via FSW and TIG (graduated: 2017).

7. Anwar Ali Baqer, Synthesis of Cerium Oxide and Copper Oxide Nanoparticales by Thermal Treatment Method and Their Characterization (graduated: 2018).

8. Engku Abd Ghapur Che Engku Ali, Preparation and Characterization of ZnO, SiO2, Zn2SiO4 and doped Zn2SiO4 nanoparticles by thermal treatment method (graduated: 2018).

9. Meysam Toozandehjani, Synthesis and characterization of CNTs and n-Al2O3 particulate-reinforced aluminum matrix Nano composites (graduated: 2018).

10. Nur Fadilah Baharuddin Pallan, Microstructure Evolution and Mechanical Properties of Glass-Reinforced Hydroxyapatite Composites from Vitreous Waste (graduated: 2018).

11. Noorfauzana Adnin, Microstructure Evolution and Mechanical Properties of Glass-Reinforced Hydroxyapatite Composites (graduated: 2018).

12. Zamratul Maisarah Binti Mohd Ismail, Fabrication and Characterization of Willemite Glass Based Doped with Neodymium, (graduated: 2018).

13. Arshin Oskoueian, Fabrication and Characterization of HA/CNT Bioceramics (graduated: 2019).

14. Alibe Ibrahim Mustapha, Synthesis and Characterization of Willemite Doped with Manganese Nanoparticles via Simple Thermal Treatment Method (graduated: 2019).

Doctoral Degree: Co-supervisor (graduated)

1. Ismayadi Ismail, Synthesis and Characterization of Soft Ferrites Nanopowder for Wave Absorbing Materials Prepared Via Mechanical Alloying Technique (graduated: 2012).

2. Aiza Masyati Mas’ut, Sensor Characteristic Studies and Thermal Characterization of Tin(IV) Oxide-based Ceramics Gas Censors (graduated: 2015).

3. Rahim Sabbaghizadeh, An Elucidating Study on the Parallel Evolving Morphology, Magnetic Properties and their Relationships in Nd-Fe-B Nano Magnetic Materials (graduated: 2015).

4. Mohd Shamsul Ezzad Shafie, An Elucidating Study on the Parallel Evolving Morphology, Magnetic Properties and their Relationships in BaFe12O19, SrFe12O19, CoFe2O4 and Co0.5Ni0.5Fe2O4 (graduated: 2016).

5. Ghazaleh Bahman Rokh, Investigation of the Science and Technological Importance of Selected Magnetic Quantum and Nano- Structure Materials and their Potential Application in Device (graduated: 2017).

6. Mehran Tamjidy, A Novel Processing Method for Dissimilar Material in Friction Stir Welding in Presence of Nano-Particle Impurities for Mechanical Properties Improvement (graduated: 2017).

7. Leila Gharibshahi, Synthesis of AG, AU, and RU Nanoparticles by Thermal Method (graduated: 2017).

8. Tasiu Zangina, Structural, Electrical, Conductivity and Dielectric Relaxation Behavior of LiMA(PO4)3 (M = Ti, Hf) NASICON Compound, (graduated: 2017).

9. Nurzilla Binti Mohamed, Development of Willemite Based Glass Ceramic Doped with Praseodymium for Optical, (graduated: 2018).

10. Daw M.A. Abdalhadi, Evelopment of Microstrip Oil Palm Fibre-Based Microwave Substrate, (graduated: 2018).

18

Doctoral Degree: Chairman (ongoing) 1. Siti Nor Ain binti Rusly, A Study of Ferrite Polymer Composite Materials as Microwave

Absorber, (in progress). 2. Adibah binti Ali, Effect of AlN and SiC on Thermal Conductivity of Porcelain Composite

for Hand Former Body, (in progress). 3. Mohammad Zulhasif bin Ahmad Khiri, Physical, Structural, Mechanical and Bioactivity

Properties of Glass Ionomer Cement Derived from Vitreous Waste Material, (in progress). 4. Che Zuraini binti Che Ab Rahman, Synergistic Effect between Transition Metal Oxides

(TMO) and Their Reduced Graphene Oxide (RGO) Supports as Electrocatalyst for Oxygen Reactions, (in progress).

5. Siti Aisah binti Harun, Wear Performance of Copper50Zirconium40Nickel10-XBoronx-Based Bulk Metallic Glasses in Structural Application, (in progress).

6. Siti Aisyah binti Abdul Wahab, Fabrication and Characterization of Cobalt Oxide Doped Willemite Based Glass-Ceramics Derived from Waste Rice Husk, (in progress).

Doctoral Degree: Co-supervisor (ongoing)

1. Mehrdad Khanisanij, Synthesize and Characterization of Nanostructured ZnO Ceramics, (in progress).

2. Rosnah Nawang, Development of Hydroxyapatite/Clay Composite for Biomedial Application (in progress).

3. Muhammad Misbah Bin Muhamad Zulkimi, Synthesis and Characterization of Nanostructured Radar Absorber Materials, (in progress).

4. Mohd Na'im bin Abdullah, Utilization of Rice Husk Ash Synthesis with Cullet for Green Window in Aerospace Applications, (in progress).

5. Mohd Khairul Hafiz bin Muda, Structronic System for Aerospace Applications, (in progress).

6. Muna Salih Mohammedjawad, Production of Graphene Nanomaterial from Palm Oil Waste and Its Application in Solar Cells, (in progress).

Master’s degree: Chairman (graduated)

1. Haslinawati Mohd Mustapha, Rare-earth-doped Silica-based for Optical Aplications (graduated: 2011).

2. Mohd Hafiz Mohd Zaid, Kinetics of Phase Formation, Crystallization and Elastic Properties of Willemite-Based Glass Ceramics (graduated: 2012).

3. Loy Chee Wah, Effects of Heat Treatment on Structure and Thermal Diffusivities of SiO2-Na2O-Al2O3 -CaO-CaF2 Glass-Ceramics from Waste Materials (graduated: 2013).

4. Nurzilla Mohamed, Physical, Structure and Thermal Properties of Mullite Based Ceramic from Black Rice Husk Ash and Alumina Mixture (graduated: 2014).

5. RabiatulAdawiyah Abdul Wahab, Physical and Thermal Properties of Mullite-Based Ceramic (graduated: 2014).

6. Nurfatin Syamimi Mohd Razali, Optical and Physical Studies of Eu-Doped Willemite-Based (graduated: 2014).

7. Firouz Fadaeifard, Effect of Friction Stir Welding on the Morphology and Mechanical Properties of AA6061-T6 Aluminum Alloy Lap Joint (graduated: 2014).

8. Gholamreza Vahedi Sarrigani, The Effect of Er2O3 on Physical, Optical and Photoluminescense of Willemite-Base Glass Ceramic (graduated: 2014).

9. Nur Farhana Samsudin, Optical Properties of Willemite-Based Glass Ceramic Doped with Manganese (graduated: 2016).

19

10. Alibe Ibrahim Mustapha, Nanoparticles from Simple Thermal Treatment Synthesis and Characterization of Zinc Oxide, Silicon Dioxide and Willemite Nanoparticles (graduated: 2016).

11. Ali Jabbar Abed Al-Nidawi, Physical and Optical Properties of Mn-Doped Zn2SiO4 Derived from White Rice Husks Ash, (graduated: 2017).

12. Mohammad Zulhasif Ahmad Khiri, Synthesis and Characterization of Hydroxyapatite Powder from Clam Shell through Wet Chemical Precipitate Method (graduated: 2017).

13. Lee Chee Sun, Physical, Structural, Optical and Elastic Properties of Zinc Silicate Glass and Glass Ceramic Derived from Rice Husk, (graduated: 2017).

14. Nadia Asyikin binti Abdul Rahman, Synthesis and Characterization of Alumina-Silica-Fluoride Based Bioglass-Ceramics, (Viva: 2019).

15. Aisyah Zakiah Khirel Azman, Fabrication and Characterization of Zinc Borosilicate Glass and Glass-Ceramics from Waste Rice Husk with Re-Melting Method, (Viva: 2019).

Master’s degree: Co-supervisor (graduated)

1. Tania Jahanbin, Thin Films of Nickel Zinc Ferrites by Plad Method (graduated: 2009). 2. Syaharudin Zaibon, Thermal Diffusivity Measurement of Glass Ceramics from Soda-lime-

silica Glass and Wastewater Treatment (graduated: 2011). 3. Mohd Zul Hilmi Mayzan, Thermal Diffusivity of Glass Ceramics from Soda-lime-silica

Glass and Coal Ash by Using Laser Flash Technique (graduated: 2010). 4. Norfarezah Hanim Edros, Thermal Diffusivity Measurement of Ceramics at Elevated

Temperature (graduated: 2011). 5. Rodziah Nazlan, An Elucidating Study on the Parallel Evolving Morphology Magnetic

Properties and Their Relationship in Polycrystalline Yttrium-Iron-Garnet (graduated: 2012). 6. Idza Riati Ibrahim, An Investigation of the Parallel Evolutions and Attendant Relationship

of Morphology and Magnetic Properties in Nickel Zinc Ferrite and Godolinium Iron Garnet (graduated: 2012).

7. Ghazaleh Bahman Rokh, An Investigation of Infrastructural and Magnetic Properties of Iron-Platinum and Cobalt-Platinum (graduated: 2012).

8. Wan Nurul Ain Wan Shaaidi, Boundry Current Transport in YBa2Cu3O7-δ High Temperature Superconductors via Materials Processing and Chemical Doping (graduated: 2013).

9. Rabiatuladawiyah Md Akhir, Sensor Characteristics Study of Ceramic Glass Sensor Based on Zinc Oxide-Cupric Oxide System (graduated: 2013).

10. Nur'izzah Md Nasir, The Effects of Modified Montmorillonite in The Performance of Glass Polyalkenoate Cement (graduated: 2014).

11. Nasim Heidari Bateni, Preparation and Characterization of Rice Husk for Energy Harvesting (graduated: 2015).

12. Francis Thoo Voon Wai, Synthesize and Characterization of Glass Ionomer Cements in Dental Application (graduated: 2015).

13. Fatemeh Mohammad Doost, Bio Ceramic Composite Hydroxyapatite/Zirconia, Mechanical and Bioactivity Properties (graduated: 2016).

14. Nur Alia Binti Sheh Omar, Structural and Optical Properties of Low Cost Zinc Silicate Based Glass Ceramics Doped with Europium, (graduated: 2016)

15. Noruzaman Daud, Preparation and Characterization of Metal Scrab to Produce Ba/Sr Permanent Magnet, (graduated: 2017).

20

16. Ojo-Kupoluyi Job Oluwatosin, Fabrication and Analysis of Microstructure and Mechanical Properties of Cemented Tungsten Carbide/Steel Bi Material by Powder Metallurgy, (graduated: 2017).

17. Amir Alizadehmonir, The Effects of Crystallinity on HDT and Shrinkage of PLA Composites (graduated: 2018).

18. Siti Syuhaida Binti Abdul Rashid; Physical, Structural and Optical Properties of Willemite Based Glass Ceramic Doped with Erbium Oxide, (graduated: 2018).

19. Karima A Mohamed Almasri, Synthesis and Characterization of Wollastonite Made from Waste Glass Doped with Samarium Oxide, (graduated: 2018).

20. Fatema Radeef Mahmoud, Synthesis and Characterization of Foam Glass Ceramic from Waste Materials, (graduated: 2019).

Master’s degree: Chairman (ongoing)

1. Rohaniah binti Abdul Jalil, Influence of Glass Ceramic with Different Sintering Temperature Towards Glass Ionomer Cement Properties, (in progress).

2. Wan Nurshamimi binti Wan Jusoh, Effect of Incorporating Synthesized Hydroxyapatite into Glass Ionomer Cement on Their Physical and Mechanical Properties, (in progress).

3. Nur Shamimi Akmal binti Azany, Fabrication of Coating Material for Anti-Radar Detection from Black Rice Husk Ash and Mill Scale, (in progress).

Master’s degree: Co-supervisor (ongoing)

1. Vidyatharran a/l Krishna, Intermetallic Morphology and Shear Strength Assessment on the Effect of Carbon Nanotubes and Graphene Reinforcement in Sn-Ag-Cu Solders on Multiple Surface Finish, (in progress).

2. Dur Iffa binti Saparuddin, Physical, Structural and Mechanical Properties of Wollastonite Based Foam Glass-Ceramic from Waste Materials, (in progress).

3. Suhail Huzaifa bin Jaafar, Structural, Morphological and Optical Properties of Ce3+ Doped Zinc Silicate (Zn2SiO4) Nanoparticles Fabricated Via Polymer Thermal Treatment Method, (in progress).

4. Muhammad Faris Syazwan bin Mohd Shofri, Physical, Structural, and Optical Properties of Zinc Silicate Based Glass-Ceramic Naocomposite Derived from ZnO-B2O3-SLS Glass System, (in progress).

5. Fida'i Rahmat, Structural and Optical Properties of Zinc Silicate Derived from Palm Waste, (in progress).

SUPERVISION OF UNDER GRADUATE STUDENTS

Bacelor (PHY 4999: Final Year Project) 1. Teow Pak Kee, The Elastic and Optical Properties of SiO2-Al2O3-CaO-Na2O-B2O3

Glasses from Vitreous Waste, (Graduated: 2007). 2. Gan Hui Ting, Effect of ZnO on the Elastic Properties of Soda-Lime-Silicate Glasses,

(Graduated: 2007). 3. Norhamizah Norzan, The Effect of TeO2 on the Optical and Thermal Properties of Glass

Ceramic from Coal Fly Ash, (Graduated: 2008). 4. Siti Nor Hawa Daud, Design the Glass-Ceramics from Coal Fly Ash and Soda Lime

Sillica Glass, (Graduated: 2008). 5. Siti Aini Satuan, Effect of Zinc Oxide on Glass-Ceramics from Vitreous Waste,

(Graduated: 2008).

21

6. Iylia Syazana Othman, The Effect of Zinc Oxide on Glass-Ceramics from Wastewater Treatment, (Graduated: 2008).

7. Siti Hawa Ismail, Production of Glass-Ceramics from Wastewater Treatment (WWT) and Soda Lime Silica (SLS) Glass, (Graduated: 2008).

8. Nur Shakirah Ahmad Sequri, Obtainment and Design Glass-Ceramics from Wastewater Treatment and Soda Lime Silica Glass, (Graduated: 2008).

9. Mohd Nazmi Mohd Nazari, Tellurite Glasses for Optical Amplifier, (Graduated: 2008). 10. Mohd Khairunizam Abdullah, Tellurite Glasses for Fiber Devices, (Graduated: 2008). 11. Tee Kuan Song, Effect of Nucleating Agent on The Structural and Thermophysical

Properties of Sodium Alumina Silicate Glasses, (Graduated: 2008). 12. Ong Yang Shan Xu, Glass-Ceramics Obtained from Soda Lime-Silica Glass and Alumina

Crucible, (Graduated: 2008). 13. Arina Abdullah, Design, Obtainment and Properties of Glasses and Glass-Ceramic from

Coal Fly Ash, (Graduated: 2008). 14. Hartini Mohd Affandi, Mechanical Properties and Microstructure of Glass Ceramic from

Coal Fly Ash, (Graduated: 2008). 15. Leong Khye Ljok, Sintered Glass Ceramics by Recycling Municipal Incinerator Bottom

Ash and Soda Lime Silica Glass, (Graduated: 2008). 16. Yap Lin Zee, Effect of Calcium Carbonate on Glass Ceramics of Vitreous Waste,

(Graduated: 2008). 17. Wong Sheau Ling, Effect of ZnO on Glass Ceramics from Coal Bottom Ash, (Graduated:

2008). 18. Siah Woan Chiou, Glass Ceramics Obtained from Soda Lime Silica Glass and Coal

Bottom Ash, (Graduated: 2008). 19. Darshini a/p Arjunan, (137845), Microstructure and Mechanical Properties of In-house

Alumina Crucible, (Graduated: 2009). 20. Chew Ser Yee, (138738), Producing Alumina Crucible by Slip Casting, (Graduated:

2009). 21. Hanisah Roslee, (136561), The Effect of Zinc Oxide on the Microstructure of Vitreous

Waste and Soda Lime silica, (Graduated: 2009). 22. Wan Nur Hidayu Wan Zaki, (136558), Microstucture and Hardness of Glass Ceramics

[(Al-Cru)x(SLS)1-x], (Graduated: 2009). 23. Ng Soo Boon, (138187), The Effects of ZnO on Properties of Ceramics from Rice Husk

Ash (RHA), (Graduated: 2009). 24. Chin Choi Chen, (139088), Effect of Er2O3 on SiO2 from Rice Husk Treated by H2SO4,

(Graduated: 2009). 25. Lim Gek Yang, (138584), Effect of Nitric Acid (HNO3) on Producing SiO2 from Rice

Husk, (Graduated: 2009). 26. Goh Pei Fen, (138842), Elementary Determination in Rice Husk by Using Inductively

Coupled Plasma, (Graduated: 2009). 27. Alif Fadhli Isa, (135853), Optical Band Gap of (ZnO)x(SLS)1-x glass-ceramics,

(Graduated: 2009). 28. Abdul Rahim Noh, (135495), Producing α-alumina from Aluminium Waste through Co-

Precipitation Method, (Graduated: 2009). 29. Teoh Anny, (138458), Producing Mullites-based Ceramics from Rice Husk and Al2O3,

(Graduated: 2009). 30. Fazilah Rahim, (136508), Producing Mullite-Based Ceramics by Slip Casting Process,

(Graduated: 2010).

22

31. Siti Nooraishah Hasni, (13705), Physical Properties and Phase Change of Mullite Ceramics, (Graduated: 2010).

32. Yap Siew Mun, (143868), Fourier Transform Infrared Spectroscopy (FTIR) Study on the Crystallization Behaviour of Willamite-based Glass Ceramics, (Graduated: 2010).

33. Yeap Lee Hiang, (143804), Crystallization Study on Glasses from ZnO and SLS Glass Via DTA, (Graduated: 2010).

34. Nadia Ramle, (136901), Producing α-alumina from Aluminium Waste through Co-Precipitation Method, (Graduated: 2010).

35. Poh Chang Chee, (143053), High Temperature Alumina-Based Packaging for SAW Resonator, (Graduated: 2010).

36. Sih Lee Chin, (143091), Physical Properties of Alumina Packet for SAW Resonator Application, (Graduated: 2010).

37. Oo Hooi Ming, (143851), Phase Changes Studies in Willemite-Based Glass and Glass Ceramics, (Graduated: 2010).

38. Aznin Baharudin, (149284), Effect of Heat Treatment on Wollastonite-based Ceramics from Soda Lime Silica Glass, Clam Cell and Magnesium Oxide, (Graduated: 2011).

39. Mohd Azhari Adnan, (150523), Phase Transformation of Glass Ceramic from Clam Shell and Soda Lime Silica Glass, (Graduated: 2011).

40. Aishah Abdul Hadi, (146282), Effect of Heat Treatment on Thermal Diffusivity of Wollastonite-based Ceramics, (Graduated: 2011).

41. Siti Nor Hidayah Mahasan, (146279), Sintering Various Composition of Magnesium Oxide, Soda Lime Silica Glass and Calcium Carbonate with Various Temperature, (Graduated: 2011).

42. Nor Fatin Muhamad Zahuri, (149296), Effect of MgO and Al2O3 on the Wollastonite-based Bio-active Ceramic for Bone Replacement, (Graduated: 2011).

43. Tengku Anuarul Amin Tuan Mat, (146344), Elastic Properties of Bio-Glass from Vitreous Waste, (Graduated: 2011).

44. Che Norhajah Hamidon, (148839), Influence of Heat Treatment on the Phase Formation and Microstructures Bio Ceramics from Vitreous Waste, (Graduated: 2011).

45. Izzati Akmar Bahri, (148955), Physical and Mechanical Properties of Unglazed Ceramic Tile of Various Sintering Temperatures and Improvements on Lessening Water Absorption, (Graduated: 2011).

46. Nur Farhana Binti Samsudin, (153297), Adsorption of Methylene Blue onto Activated Carbon Prepared from Bamboo, (Graduated: 2012).

47. Sek Wen Yoeng, (152086), Thermal diffusivity of 45S5-based bioglass doped with CuO, (Graduated: 2012).

48. Tan Kok Hooi, (152634), The effect of heat treatment on the phase transformation of of45S5-based bioglass doped with CaF2, (Graduated: 2012).

49. Ng Chian Xin, (154641), Synthesis and characterization of dense bioglass/hydroxyapatite composite, (Graduated: 2012).

50. Zaizaful Nabilah Daud, (154751), Thermal diffusivity of dense bioglass/hydroxyapatite composite, (Graduated: 2012).

51. Sam Choon Hong, (151545), Synthesis and characterization of porous bioglass/hydroxyapatite composite, (Graduated: 2012).

52. Wong CheeYuong, (152479), Thermal diffusivity of porous bioglass/hydroxyapatite composite, (Graduated: 2012).

53. Nur Farhana Samsudin, (153297), Adsorption of Methylene Blue onto Activated Carbon Prepared from Bamboo, (Graduated: 2013).

23

54. Tee Chee Hua, (158916), Development on Gallium Doped Glass Based Optical Preform, (Graduated: 2014).

55. Ch’ng Li Min, (158558), Preparation and Characterization of Barium Oxide and Erbium Oxide Doped Silica-Based Optical Preform, (Graduated: 2014)

56. Chan Chiun Kit, (158392), Development and Improvement on Soot Sample Silicon Dioxide with Phosphorus Pentoxide Based Rare Earth Element Doped Optical Freform, (Graduated: 2014).

57. Mohammad Zulhasif Ahmad Khiri, Synthesis and characterization of hydroxyapatite powder from clam shell through wet chemical precipitate method, (Graduated: 2014).

58. Lee Chee Sun, (169133), Structural Analysis of Zinc Silicate Glass Derived from White Rice Husk Ash by Water Quenching Technique, (Graduated: 2016).

59. Lim Hing Guan, (169211), Optical Properties of Zinc Silicate Glass Fabricated From Rice Husk Waste Prepared By Water Quenching Process, (Graduated: 2016).

60. Sarah Diyana Noor Azami, (166736), Effect of Cobalt on Electrical Properties of Willimite-Based Glass Ceramic Derives by White Rice Husk Ash (WRHA), (Graduated: 2016).

61. Tilaga a/p Moganosundaram, (168938), The effect of cobalt (II) oxide on the optical properties of willemite-based glass ceramic from rice husk prepared by water quenching, (Graduated: 2016).

62. Latipah Redzuan, (173572), Fabrication of Ni0.6Zn0.4Fe2O4 and Co0.2Ni0.4Zn0.4Fe2O4 as coating material for anti radar detection, (Graduated: 2017).

63. Nor Shazwani Abd Hamid, (171911), Fabrication of Multilayer Nanocomposite (BaCoZnFe16O27, SrCoZnFe16O27, Rice Husk) as Coating Material for Anti Radar Detection, (Graduated: 2017).

64. Nurfaziera Binti Rahim, (174154), Fabrication of multilayer nanocomposite (CoFe2O4, Co0.6Zn0.4Fe2O4, Graphite) as coating material for anti-radar detection, (Graduated: 2017).

65. Anis alwani Husni, (173664), Fabrication of BaCoMnFe16O27 and SrCo3MnFe16O27 as coating material for anti radar detection, (Graduated: 2017).

66. Nor Dalilah Zulkifri, (173307), Fabrication of BaCoZnFe16O27, SrCoZnFe16O27 with graphite nanocomposite as coating material for anti radar detection, (Graduated: 2017).

67. Intan Syahirah Muhamad, (173288), Fabrication of Ni0.6Zn0.4Fe2O4/Co0.2Ni0.4Zn0.4Fe2O4-Rice Husk Nanocomposite as Coating Material for Antiradar Detection, (Graduated: 2017).

68. Amni Amirah Binti Kamarul Baharom, (178128), Fabrication and Effect of Sintering Temperature on Physical and Microstructural Properties of Alumino Silicate Ceramics Via Slip Casting Process, (Graduated: 2018).

69. Fazlina Bt Mohd Sidek, (176538), Effect of Sintering Temperature on Physical and Microstructural Properties of Aluminosilicate Ceramics Via Slip Casting Process, (Graduated: 2018).

70. Nadia Tihani binti Harun, (180549), Effect of Sintering Temperature on Thermal and Structural Properties of Aluminosilicate Ceramics for Hand Former, (Graduated: 2018).

71. Stephanie Anak Unjat, (176524), Fabrication and Effect of Sintering Temperature on Thermal and Structural Properties of Aluminosilicate Ceramics Via Slip Casting Process, (Graduated: 2018).

72. Mardhiah Binti Abd Ghani, (177154), Effect of Calcium Fluoride on Thermal and Microstructural Properties of Alumino-Silicate-Fluoride Based Glass-Ceramics, (Graduated: 2018).

24

73. Norhidayah Bt Mohd Adenam, (178005), The Physical, Structural and Mechanical Properties of Glass Ionomer Cement Using Different Glass Composition from Vitrous Material and Ageing Time, (Graduated: 2018).

74. Nurbaiti Binti Azman, (178299), Effect of Clam Shell on Physical and Structural Properties of Alumino-Silicate-Fluoride Based Bioglass Ceramic, (Graduated: 2018).

75. Nurjihan Syahirah Bt Azmi, (177555), Effect of Calcium Fluoride on Physical and Structural Properties of Alumino-Silica-Fluoride Based Bioglass Ceramic from SLS Glass and Clam Shell, (Graduated: 2018).

76. Rohaniah Binti Abdul Jalil, (177608), Physical, Structural and Mechanical Properties of Glass Ionomer Cement Using Different Glass Composition from Vitreous Waste, (Graduated: 2018).

77. Wan Nurshamimi Binti Wan Jusoh, (178952), Effect of Clam Shell on Thermal and Microstructural Properties of Alumino-Silicate-Fluoride Based Glass-Ceramics, (Graduated: 2018).

78. Siti Nur Asyiqin Binti Harun, (184397), Microwave Absorbing Material Performances at Gigahertz Frequency of CNT-Fe Composites – Mill Scale, (Graduated: 2018).

Bacelor (PHY 4997: Mini Project)

1. Nadia Roslan, Determination of Phase Structure of Coal Fly Ash by Using XRD, (Graduated: 2007).

2. NoorlailiSuriatiMohd Hanafi, A Study on Tracing Elements in Vitreous Waste Materials by Using ICP-OES, (Graduated: 2007).

3. Siti Razilah Othman, A Microstructure Studies of Glass and Glass Ceramic by Using Optical and Electron Microscopy, (Graduated: 2007).

4. Mohd Faizal Yagi, Effect of Heat Treatment on Rice Husk After Treated by HNO3 Acid, (Graduated: 2008).

5. Mohd Aiman bin Ghazali, The Effect of Heat Treatment on Rice Husk after treated by HCL acid, (Graduated: 2008).

6. Mohd Syafiq bin Ghazali, The Effect of Heat Treatment on Rice Husk (RH) after treated by Sulfuric acid (H2SO4), (Graduated: 2008).

7. Noraidah Sobri, Nucleation Study via Differential Thermal Analysis (DTA), (Graduated: 2008).

8. Yusup Abd Latip, Nucleation Study of Glass Ceramic from Vitreous waste Via Differential Thermal Analysis (DTA), (Graduated: 2008).

9. Abd Qahhar Abd Rahman, Preparation of Silicon Dioxide by Sol-gel Technique, (Graduated: 2008).

10. Mohd Hafiz Hazali, Preparation of TeO2 by Using Sol-gel Technique and Microstructure study of the Particle Size, (Graduated: 2008).

11. Azmajura Abdul Rahim @ Arifin, Effect of Acid Treatment on Rice Husk: ICP-OES Study, (Graduated: 2008).

12. Che Rafidah Che Mat Joni, Examination of Phase Evolution of Coal Bottom Ash by Using High Temperature XRD, (Graduated: 2008).

Bacelor (PHY 4901: Industrial Training)

1. Gan Kah Yan (152550), Kencana Petroleum SDN. BHD, Plot D1, Lumut Port Industrial Park, Kampung Acheh, Mukim Lumut, Daerah Manjung, 32000, Sitiawan, Perak Darul Ridzuan, (2012).

25

2. Siti Nurulhazirah Bt Abdul Halim (152232), Human Capital Perak Telekom Malaysia Bhd., Tgkt 1, Blok A, Kompleks Tm Jalan Lumba Kuda, 34672 Taiping, Perak, (2012).

3. Abdul Haqeem B. Akhyani (157147), Hicom Automotive Manufacturer (M) Sdn. Bhd., Kompleks Automotive DRB Hicom Pekan, Kawasan Perindustrian Peramu Jaya, No.7, 26607 Pekan, Pahang, (2013).

4. Mardiana Bte Ahmad (157338), ZFT Temerloh, Ibusawat TM Temerloh, Jalan Tengku Ismail, 28000 Temerloh, Pahang, (2013).

5. Noor Ariffuddin Bin Jalani (153580), Pahang Cement Sdn. Bhd, P.O Box 232, Bukit Sagu 4, 25720 Kuantan, Pahang, (2013).

6. Siti Fazirah Bt Mohd Sanusi (154572), Pahang Cement Sdn. Bhd, P.O Box 232, Bukit Sagu 4, 25720 Kuantan, Pahang, (2013).

7. Ain Farihah Bt. Mohamad Nadzri, Isuzu Hicom Malaysia SDN. BHD, Peramu Jaya Industrial Estate, 26600 Pekan, Pahang, (2014).

8. Che Nur Hamizah Binti Che Lah, Hyerwave System Engineering, Pt 12510 Plot A21, Kawasan Perusahaan Cacar, Mukim Kuala Paka, 23100 Dungun, Terengganu, (2014).

9. Ami Hazlin Binti Mohd Nor, Delphi Packard Electric Malaysia SDN. BHD, Lot. 3089 Chendering Industrial Estate, 21080 Kuala Terengganu, Terengganu, (2014).

10. Nurul Ismah Izanti Bt Ismail, Delphi Packard Electric Malaysia SDN. BHD, Lot. 3089 Chendering Industrial Estate, 21080 Kuala Terengganu, Terengganu, (2014).

11. Muhammad Imran Bin Awing, Pusat Kesihatan Pelajar, Universiti Malaysia Terengganu, 21030 Kuala Terengganu, (2014).

12. Asraf Mustaqim B. Amran (162683), CHEE LEAT Engineering Works Sdn. Bhd., Lot. 31, Jalan 18/62, Kawasan Perindustrian Seri Kembangan, 43300 Seri Kembangan, Selangor Darul Ehsan, (2015).

13. Abddul Halim Bin Azizan (162525), CHEE LEAT Engineering Works Sdn. Bhd., Lot. 31, Jalan 18/62, Kawasan Perindustrian Seri Kembangan, 43300 Seri Kembangan, Selangor Darul Ehsan, (2015).

14. Noor Muhammad Adeeb Danial Bin Muhalim (161280), CHEE LEAT Engineering Works Sdn. Bhd., Lot. 31, Jalan 18/62, Kawasan Perindustrian Seri Kembangan, 43300 Seri Kembangan, Selangor Darul Ehsan, (2015).

15. Lee Chuan Cheng (173929), Edging Master Manufacturing Sdn. Bhd., No. 4 Jalan Sungai Batu 6/KU6, Kawasan Perindustrian Klang Utama, 42100 Klang, Selangor, (2016).

16. Lim Ching Thiam (172400), Edging Master Manufacturing Sdn. Bhd., No. 4 Jalan Sungai Batu 6/KU6, Kawasan Perindustrian Klang Utama, 42100 Klang, Selangor, (2016).

17. Ban Fook Hua (174129), Edging Master Manufacturing Sdn. Bhd., No. 4 Jalan Sungai Batu 6/KU6, Kawasan Perindustrian Klang Utama, 42100 Klang, Selangor, (2016).

18. Phang Sze Wang (171808), Edging Master Manufacturing Sdn. Bhd., No. 4 Jalan Sungai Batu 6/KU6, Kawasan Perindustrian Klang Utama, 42100 Klang, Selangor, (2016).

19. Fida'i Bin Rahmat (176938), Optima Klasik Sdn. Bhd. Iris Smart Technology Complex Technology Park Malaysia, Bukit Jalil 57000 Kuala Lumpur.

EXAMINER TO STUDENT External Examiner

1. Nur Rifhan Binti Rosli (Master of Manufacturing Engineering); “The Effect of Forming Method on Glass Ceramics Material Produced from Waste Glass”, Universiti Teknikal Malaysia Melaka, MALAYSIA. (2009)

26

2. Nafisa Tamanna (Master of Engineering (Civil Engineering)); “Characterization of Pozzolanic Properties of Waste Glass as Partial Replacement of Cement”, Faculty of Engineering, Universiti Malaysia Sarawak, MALAYSIA. (2015)

3. Muliana Ismail (Master of Science); “Elastic, structural and optical properties of (80-x)TeO2-xBaO-20ZnO and xAg2O-(35-x)[0.5MoO3-0.5V2O5]-65TeO2 glasses”, Universiti Teknologi MARA, MALAYSIA. (2015)

4. Siti Wahidah Nazari (Master of Science); “Dielectric, AC Conductivity and Optical Properties of Mixed lonic Electronic 20Li2O-xBi2O3-(80-x) TeO2”, Universiti Teknologi MARA, MALAYSIA. (2017).

5. Illani Binti Ibrahim (Master of Science); “Fabrication & Characterization of Electrospun Chitosan/Aloevera composite Nanofiber Membrane for wound Healing Application”, Universiti Teknologi MARA, MALAYSIA. (2017).

6. Nur Syafkeena binti Mohd Affandi, (conversion from AS759 (Master of Science [Physics]) to PhD (AS950)); “Designing of Nano-Grain Composite Model for Improving Conductivity of Both Grain Core and Grain Boundry Regions of BaCe0.54Zr0.36Y0.1O3-δ Electrolvte Membrane”, Universiti Teknologi MARA, MALAYSIA. (2018).

7. Zaidatul Aslamiyah Tumijan, "Electrokinetic Remediation of Heavy Metal of River water", Universiti Teknologi Malaysia, Johor Bahru, Malaysia, (2019).

8. Shima Asyurah Binti Shuhaimi (2016357953), " Effects of Mixed Glass Former on AC Conductivity, Dielectric and Optical Properties of 70[xTeO2 + (1-x)B2O3] + 15Na2O + 15K2O Glasses” Universiti Teknologi Mara, Shah Alam, Selangor Darul Ehsan, Malaysia, (2019).

9. Nur Hazeeqah Binti Mohd Farhadi (GW160054), "Production of Zinc Iron Phosphate Glasses by Microwave and Conventional Processing Methods” Universiti Tun Hussein Onn Malaysia, Johor, Malaysia

10. Maria Fazira Binti Mohd Fekeri (P3352), "Corrosion and Microbial Inhibition of Local Herb (Andrographis Paniculata) on Steel in Seawater” Universiti Malaysia Terengganu, 21030 Kuala Nerus, Terengganu, Malaysia, (2019).

11. Mohamad Zaenudin, “Molecular Dynamics Simulation of Diffusion Bonding Between Aluminium and Nickel”, Management & Science University, Shah Alam, Selangor, Malaysia, (2019).

12. Ali Bader Alshemali, “Grain Boundary Engineering of Inconel 625 using Iterative Thermomechanical Processing”, Kuwait University, Kuwait, (2019).

Internal Examiner (PhD)

13. Mahmoud Goodarz Naseri (GS22827); “Synthesis and Characterization of Ferrites nanoparticles by Thermal Treatment Method”, Universiti Putra Malaysia. (2011).

14. Hamidreza Baharipoorfarkoosh (GS19730); “Structure and Physical Properties of GeO2-PbO-Bi2O3 Glass”, Universiti Putra Malaysia. (2013)

15. Alex See (GS27384); “Effect of Sintering Temperature on the Thermal, Mechanical and Dielectric Properties of Kaolinite-Mullite Properties Via Insertion of SiC/Si3N4 Nanoparticles”, Universiti Putra Malaysia. (2016)

16. Taha Roodbar Shojaei (GS34051); “Carbon Nanoparticles as Replacement for Gold in Fluorescence Resonance Energy Transfer for Detecting Virus”, Universiti Putra Malaysia. (2016)

17. Mojgan Tajdidzadeh (GS33982); “The Effect of Metal Nanoparticles Properties in Aqueous Media by Using Laser Ablation and Photothermal Techniques”, Universiti Putra Malaysia. (2016)

27

18. Ibrahim Muhammad (GS35132), “Mechanically Induced Defects in Milled CdZnSe Nanocrystalline Powder”, Universiti Putra Malaysia. (2016)

19. Wan Norailiana Binti Wan Ab Rahman (GS34575); “Elucidation of the Parallel Evolution of Microstructures and Electrical Properties and their Relationship in Zinc Oxide Semiconductor”, Universiti Putra Malaysia. (2016)

20. Aysar Sabah Keiteb (GS32612); “Synthesis and Characterization of TiO2-ZrO2 Binary Oxides Semiconductors Nano-Particles Via Modified Thermal Treatment Method”, Universiti Putra Malaysia. (2016)

21. Salem, Aeshah Nizar (GS29918); “Synthesise and Chractrization of CdSe, ZnSe Nanoparticales”, Universiti Putra Malaysia. (2016)

22. Tan Kwee Yong (GS35599); “Room Temperature Dielectric Properties of Polycrystalline Magnesium Diboride”, Universiti Putra Malaysia. (2017)

23. Nor Hapishah Binti Abdullah (GS34583); “Parallel Evolution of Morphology and Multiferroic Properties of Polycrystalline Holmium and Yttrium Manganite (HoMnO3and YMnO3) Synthesized Via Mechanical Alloying”, Universiti Putra Malaysia. (2016)

24. Ng Siau Wei (GS31994), “Magnetic and Electrical Transport Properties of Nano-Sized Pr-(Ca, Ba, Sr, K and Na)-MnO”, Universiti Putra Malaysia. (2017)

25. Hind Fadhil Oleiwi (GS38707), “Incorporation of Bi into CdS Quantum Dots Coated on ZnO Nanorods for Photovoltaic Performance Enhancement in Inverted Organic Solar Cells”, Universiti Putra Malaysia. (2017)

26. Muhammad Syazwan bin Mustaffa (GS39139), “Synthesis and Characterization of Magnetic-Polymer Nanocomposite for Radar Wave Absorption”, Universiti Putra Malaysia. (2017)

27. Auwalu Inusa Abubakar (GS40889), “Structural, Optical and Thermal Properties of Sm2O3/Bi2O3 Doped Zinc Silicate (Willemite) Glass Ceramics from Waste Material”, Universiti Putra Malaysia. (2017)

28. Kawa Mudhher (GS40257), “Structural, Thermal and Optical Properties of Zinc Boroaluminosilicate Glasses for Optical Power Amplification”, Universiti Putra Malaysia. (2018)

29. Low Zhi Huang (GS40429), “Comparative Study of Structural, Magnetic, and Optical Properties of Barium Hexa-Ferrite and Nickel Zinc Ferrite Synthesized Via Top-Down and Bottom-Up Approaches”, Universiti Putra Malaysia. (2018)

30. Muhammad Sani Usman (GS41068), “Synthesis and Characterization of Gadolinium- and Gold-Doped Layered Double Hydroxide and Graphene Oxide Nanocomposites for Drug Delivery and Bimodal Computed Tomography/Magnetic Resonance Imaging”, Universiti Putra Malaysia. (2018)

31. Dayang Nur Fazliana binti Abdul Halim (GS31170), “Parallel Evolution Studies of Microstructure and Complex Permittivity of Magnesium Titanate Doped Barium Strontium Titanate Prepared via Mechanical Alloying”, Universiti Putra Malaysia. (2018)

32. Salah Hassan Almokhtar Alazoumi (GS43560), “Elastic, Optical and Thermal Properties of Binary Lead Tellurite and Ternary Zinc Lead Tellurite Glass Systems”, Universiti Putra Malaysia. (2018)

33. Dayang Nur Fazliana Binti Abdul Halim (GS31170); “Parallel Evolution Studies of Microstructure and Complex Permittivity of Magnesium Titanate Doped Barium Strontium Titanate Prepared Via Mechanical Alloying”, Universiti Putra Malaysia. (2018)

34. Lam Siok Ee (GS35398), “Dosimetric Characteristics of the Fabricated Ge-Doped Silica Optical Fibres for Small Fields”, Universiti Putra Malaysia. (2018)

28

35. Mohd Hamzah bin Harun (GS34423), “Synthesis and Characterization of Transparent Water Repellent Coating”, Universiti Putra Malaysia. (2018)

36. Mutia Suhaibah binti Abdullah (GS31552), “Parallel Studies on the Morphology and Dielectric Properties of SrTiO3 Doped CaCu3Ti4O12 Prepared Via Mechanical Alloying”, Universiti Putra Malaysia. (2018)

Internal Examiner (Master)

37. Nur Sharizan Mohamed Dan (GS15150); “Time Domain Reflectometry Technique Using Agilent Vee”, Universiti Putra Malaysia. (2008)

38. Mohd Kamarulzaman Mansor (GS18794); “Structure, Microstructure and Superconductivity in YBa2Cu3O7-δ with Magnetic Nanoparticle Additives”, Universiti Putra Malaysia. (2010)

39. Hasnidar Hamid (GS19924); “Detection of Trigyceride Based on Microwaves Dielectric Properties of Triglyceride Enzymatic Reaction”, Universiti Putra Malaysia. (2010)

40. Ng Siau Wei (GS20582); “Study of Structure, Magnetic and Electrical Properties of LA-A-Mn-O (A=Ca, Sr, Ba, Na and K) Bulk and Thin film”, Universiti Putra Malaysia. (2011)

41. Naif Mohammed Ali (GS17794); “Radiation Synthesis and Characterization of Conducting Polyaniline from Aniline/MgCl2 and Aniline/CaCl2 Composites in Polyvinyl Alcohol”, Universiti Putra Malaysia. (2011)

42. Ahmad Fahad Ahmad (GS22775); "Comparative Performance Analysis between Linear and Circular Microstrip Method for Determination of Moisture Content in Rubber Latex", Universiti Putra Malaysia. (2011)

43. Norita Noordin (GS20990); “Pembangunan Perisian Kursus Interaktif Untuk Membantu Meningkatkan Kemahiran Penyelesaian Masalah Hukum Newton Di Kalangan Pelajar Peringkat Pra-Universiti”, Universiti Putra Malaysia. (2011)

44. Choo Thye Foo (GS24031); “Preparation and Characterization of Mullite-Based Ceramics from Malaysian Kaolin”, Universiti Putra Malaysia. (2012)

45. Amizadillah Md Norimi (GS22373); “Variations in Reflectance with Moisture Content of Single Maize Kernels and Spinach Leaves at Wavelength 300 nM to 800 nM”, Universiti Putra Malaysia. (2012)

46. Tan Kim Lee (GS23004); “Optimisation of the Superconducting Properties of MgB2 Prepared by Reaction of MgB4 and Mg”, Universiti Putra Malaysia. (2012)

47. Noorfauzana Adnin (GS19934); “Microstructure, Electrical and Optical Properties of ZnO based Varistor Ceramics with Small-Amount MnO2 and CO3O4 Dopant”, Universiti Putra Malaysia. (2012)

48. Fariba Mahdavi (GS26556); “Intercalation Studies of Urea into Kaolinite Nanolayers for Controlled Release Fertilizer Application”, Universiti Putra Malaysia. (2012)

49. Aiman Moftah A. Dandi (GS24509); “Synthesis of Conducting Polythiophene/Polyvinyl Alcohol Composites by Gamma-Ray Irradiation Method”, Universiti Putra Malaysia. (2012)

50. Atefeh Jafari (GS27378); “Synthesis and Characterization of Cadmium Sulphide Nanostructured Thin Film by Chemical Bath Deposition Technique” Universiti Putra Malaysia. (2012)

51. Shazed Md. Aziz (GS26931); “Experimental and Theoretical Evaluation of the Effect of CNT Coating on the Tensile Properties of CNT-CF Hybrid Composite”, Universiti Putra Malaysia. (2013)

52. Pan Kai Yap (GS25042); “Effects of Different Synthesis Methods on Physical Properties of La0.85K0.15MnO3”, Universiti Putra Malaysia. (2013)

29

53. Golnoush Zamiri (GS32054); “Preparation and Photoluminescence Properties of TiO2 Nanostructures by Hydrothermal Method”, Universiti Putra Malaysia. (2014)

54. Lee Phin Jit (GS28160); “Characterization of Zinc Oxide and Copper Oxide Synthesize Using Thermal Treatment Method”, Universiti Putra Malaysia. (2014)

55. Samaneh Babakhani (GS30938); “Synthesis and Characterization of Zn-Al and Mg-Al Layered Double Hydroxide Nanocomposite Intercalated with Sodium Dodecyl Sulfate (SDS)”, Universiti Putra Malaysia. (2014)

56. Muhammad Misbah Muhamad Zulkimi (GS31274); “Parallel Evolution of the Microstructure, Physical Properties and their Relationship in Co0.5Zn0.5Fe2O4 Ceramics”, Universiti Putra Malaysia. (2014)

57. Adamu Salahudeen Gene (GS33427); “Structural, Optical and Magnetic Characterization of Spinel Zinc Chromite (ZnCr2O4) Nanocrystals Synthesized by Thermal Treatment Method”, Universiti Putra Malaysia. (2014)

58. Raheleh Jorfi (GS31852); “Laser Ablation Fabrication of Zinc Oxide Nanoparticles and Characterizing”, Universiti Putra Malaysia. (2014)

59. Manal Ahmed Hashem (GS37726); “Influence of Calcination Temperature on Nickel Oxide Nanoparticles Synthesized by Thermal Treatment”, Universiti Putra Malaysia. (2015)

60. Mohammed Abdulazeez Nareeman (GS40920); “Laser Ablation Synthesis and Characterization of Colloidal Cu Doped ZnO Semiconductor for UV Photocatalytic Water Treatment”, Universiti Putra Malaysia. (2016)

61. Nurul Akhma Binti Shaharun (GS39201); “Novel Nanostructured Carbon Synthesis Via Alcohol Catalytic Chemical Vapor Deposition (ACCVD) and Mill Scale as a Catalyst”, Universiti Putra Malaysia. (2016)

62. Lee Mai Woon (GS31225); “Multi-Walled Carbon Nanotubes Deposited by PECVD for Carbon Dioxide Gas Sensor”, Universiti Putra Malaysia. (2016)

63. Syed Putra Haizam Bin Syed Hashim (GS26343), “Synthesis and Properties of Borotellurite Glass Doped with Manganese”, Universiti Putra Malaysia. (2016)

64. Nurliyana Shamimie bt Rusli (GS41138), “Modelling and Experimental Investigations of Defect in Austenitic Stainless-Steel Sample Using Eddy Current Thermography Testing Technique”, Universiti Putra Malaysia. (2017)

65. Ali Jassem Abdulhusian (GS41457), “Characteristics Lithium Fluoride Doped by Mg/Cr, Cu/Ni and P Nano-Composites”, Universiti Putra Malaysia. (2017)

66. Nor Nadhirah binti Che Muda (GS42038), Synthesis Barium Hexaferrites Derived from Steel Waste Viaammonium Nitrate Salt Melt Method, Universiti Putra Malaysia. (2017)

67. Norhafizah binti Mohd Rasdi (GS42165), Synthesize, Characterization and Optical Studies of Cobalt (II) Doped Zinc Silicate via Sol-Gel Method, Universiti Putra Malaysia. (2017)

Chairperson of Viva (PhD)

68. Julia Tan Meihua (GS28697), “Synthesis, Characterization and Cytotoxicity Evaluation of Carboxylated Carbon Nanotubes Functionalized with Silibinin, Betulinic Acid and Levodopa for Drug Delivery Systems”, Universiti Putra Malaysia. (2015)

69. Abdollah Hajalilou (GS33099), “Mechanochemical Synthesis of Nanostructured Nickel and Nickel-Zinc Ferrites and Investigation of their Structural and Magnetic Properties”, Universiti Putra Malaysia. (2015)

70. Tumirah Bt. Khadiran (GS30491), “Nano-Encapsulated Organic Phase Change Material as Thermal Energy Storage Medium”, Universiti Putra Malaysia. (2015)

30

71. Julia Tan Meihua (GS28697), “Synthesis, Characterization and Cytotoxicity Evaluation of Carboxylated Carbon Nanotubes Functionalized with Silibinin, Betulinic Acid and Levodopa for Drug Delivery”, Universiti Putra Malaysia. (2015)

72. Siti Fatimah Binti Abd Rahman (GS32185); “Design, Fabrication and Characterization of Silicon Nanowire Based DNA Biosensor for Dengue Virus DNA Detection”, Universiti Putra Malaysia. (2016)

73. Batool Eneaze Bandar (GS39706), “Synthesis and Characterization of Cu/Porous Silicon Con/Posite for Photodetector Applications”, Universiti Putra Malaysia. (2017)

74. Mustafa Mousa Dihom (GS40479), “Microstructure and Superconducttng Properties of Y-Ba (Ca/K)-Cu-O Systems (Y123 and Y358) Synthesized Using Thermal Treatment Method”, Universiti Putra Malaysia. (2018)

75. Ruzanna binti Ibrahim (GS33082), “Synthesis and Characterization of Carbon Nanotubes-Quicklime Nanocomposites and Reduced Graphene Oxide Hybrids for Screen Printed Electrode Modification”, Universiti Putra Malaysia. (2018)

Chairperson of Viva (Master)

76. Mohd. Faisal Mohd. Aris (GS17744); “Synthesis, Morphology and Superconducting-Property Characterization of MgxB2 and MgB2 with SiB4 Additions”, Universiti Putra Malaysia. (2010)

77. Siti Mazatul Azwa Saiyed Mohd Nurddin (GS19001); “Purification of Local Silica Sand deposits and Their Utilisation in Cordierite Glass-Ceramics”, Universiti Putra Malaysia. (2010)

78. Suhaila Hani Ilias (GS18722); “Gamma Radiation Induced Synthesis and Optical Characterization of Cobalt and Nickel Nanoparticles Stabilized in Polymer”, Universiti Putra Malaysia. (2011)

79. Ali Hamad Ali (GS25493); “Novel Monopole Antenna Technique for Determination of Moisture Content in Hevea Rubber Latex”, Universiti Putra Malaysia. (2011)

80. Noorhanim Ahad (GS22640); “Radiation and Temperature Effects on Electrical Properties of Poly(Vinyl Alcohol)-Sodium Salicylate Polymer Electrolytes”, Universiti Putra Malaysia. (2012)

81. Nor Hapishah Abdullah (GS19993); “Isochronal Recovery behavior of Radio-Frequency Energy Loss and Electrical Resistivity in Yttrium Iron Garnet (Y3Fe5O12) Synthesized via Mechanical Alloying”, Universiti Putra Malaysia. (2012)

82. Nur Amalina Hafiza Ahmad Nizar (GS25748); “Effect of Nano-(Pr6O11, CeO2) Addition and Pr, Ce Doping in Bi-2223 Superconductor”, Universiti Putra Malaysia. (2013)

83. Poh Lin Leng (GS28333); “Synthesis and Characterization of Nickel Zinc Ferrite Nanoparticles Prepared by Thermal Treatment Method”, Universiti Putra Malaysia. (2013)

84. Chin Hui Wei (GS27933); “A Study of Magnetoresistance Effect of Nano-Sized Particle through Different Methods”, Universiti Putra Malaysia. (2014)

85. Sumaiyah Megat Nabil Mohsin (GS30445); “Synthesis of Zinc Layered Hydroxide and Zinc- Aluminium-Layered Double Hydroxide as Host of Ultraviolet Ray Absorbing Molecules for Sunscreen Application”, Universiti Putra Malaysia. (2014)

86. Masoumeh Dorraj (GS32899); “Optimizing the Nano Solution Coating Method to Achieve the Maximum Non-Linearity Property for ZnO Based Low-Voltage Varistor”, Universiti Putra Malaysia. (2014)

87. Muhammad Aizat Noor Ismail (GS32254); Evolution of Morphology and Multiferroic Properties of Polycrystalline Erbium Manganite (ErMnO3) Synthesized Via Mechanical Alloying”, Universiti Putra Malaysia. (2014)

31

88. Seyedehmaryam Moosavi (GS33236); “Optimizing Sintering Process in ZnO Low Voltage Varistor by Response Surface Methodology (RSM)”, Universiti Putra Malaysia. (2014)

89. Mohd Khairul Ikhwan Bin Mohd Zawawi (GS31285); “Physical and Optical Characterization of Yttrium Aluminum Monoclinic Prepared Via Citrate-Nitrate Sol-Gel and Mechanical Alloying Method”. (2014)

90. Sepideh Keshan Balavandy (GS31693); “Synthesis and Characterization of Silver Nanoparticles Mediated in Glutathione and Sodium Alginate”. (2014)

91. Chin Pik Yee (GS31992); “Structural, Electrical, Optical, Thermal Diffusivity and Carrier Transport Properties of Nickel Selenide”, Universiti Putra Malaysia, (2015)

92. Syed Putra Haizam Syed Hashim (GS26343); “Synthesis and Properties of Borotellurite Glass Doped with Manganese”, Universiti Putra Malaysia. (2016)

93. Azelah Bt Kharudin@Khairudin (GS39282), “Synthesize, Morphology Evolution, and Structural Properties of Indium Antimonide (INSB) Nanowires by Template Assisted Electrodeposition”, Universiti Putra Malaysia. (2016)

94. Nuraine Mariana Binti Mohd Shahrani (GS39169), “Effect of Variation Sintering Temperature on Microstructure and Magnetic Properties and their Relationship with Electrical and Microwave Properties in Yttrium Iron Garnet Derived by Mill Scale Waste Product”, Universiti Putra Malaysia. (2016)

95. Yusnita Binti Yusuf (GS38084), “Synthesis and Characterization on Property-Optimized of Nickel Zinc Ferrite Thin Film”, Universiti Putra Malaysia. (2016)

96. Saman Azhari (GS36671), “Development of CNTS/PDMS Nanocomposite; Applicable for Nano Scale Piezoresistive Pressure Sensing Applications”, Universiti Putra Malaysia. (2016)

97. Rozita Binti Ahmad (GS31890), “Synthesis and Characteristics of Controlled Release Formulation of Insect Pheromone Based on Zinc Layered Hydroxide Nanocomposite”, Universiti Putra Malaysia. (2018)

98. Noor Lyana Binti Adnan (GS38637), “Synthesize and Characterization of Carbon Nanotube Superfiber Materials by Floating Catalyst Chemical Vapour Deposition Method”, Universiti Putra Malaysia. (2018)

99. Nur Nabilah binti Mohd Yusuf (GS42764), The Influence of NbO2 and SnO2 Addition in YBCO Bulk Superconductor Synthesised via Thermal Treatment Method. (2018)

100. Sakinah binti Sulaiman (GS42040), Effect of pH on Structural and Magnetic Properties of SrFe12O19 Nanoparticles Via Sol Gel Synthesis, Universiti Putra Malaysia. (2018)

LIST OF STUDENT ADVISOR (PA)

1. 140539 Muhammad Noor Fikri Bin Noor Azman 2. 146226 RafidahBte Hassan 3. 146627 Siti NadiahBt Abu Hasim 4. 147031 Siti Nazira Binti Abd Hamid 5. 148554 NurulSaihah Binti Abdul Lani 6. 149520 Sullianie Binti Sani 7. 149697 Tan Han Swee 8. 151797 Nur Fazrina Binti Ismail 9. 152028 NurulAssikin Binti Ariffin 10. 152059 Nur Fadzilah Binti Muktar 11. 152796 Nurfazliana Binti Hasanudin 12. 153477 Nuraine Mariana Binti MohdShahrani 13. 154496 Nurhidayati Binti MohdSidek

32

14. 154572 Siti Fazirah Binti MohdSanusi 15. 154788 Siti Khodijah Binti Yusuf 16. 156296 Syafiah Binti Mohammad 17. 157264 Siti Syuhaida Binti Abdul Rashid 18. 157751 Zarina Binti MohdSallehuddin 19. 158106 Siti Khalijah Binti Kamarudin 20. 158392 Chan Chiun Kit 21. 158541 Syaza Rosalina Binti Rosli 22. 158558 Ch'ng Li Min 23. 158581 Chew Zi Yang 24. 162149 Muhammad Rifa`Ie Bin Jamaluddin 25. 163051 Muhammad Zaharul Asyraf Bin Zaharin 26. 163406 Noor Atikah Binti Zazali 27. 163732 Muhammad Shafi'in Bin Mat Shayuti 28. 164357 Muhammad Syafiq Bin Mohammad Hussin 29. 173303 Emayaruba A/P G Barathi Dassan 30. 178952 Wan Nurshamimi Binti Wan Jusoh 31. 178935 Wan Amirah Binti Wan Abdul Razak 32. 179808 Suhail Huzaifa Bin Jaafar 33. 174651 Aimi Rohaizah Binti Md Jasan 34. 174129 Ban Fook Hua 35. 177377 Syazana Binti Sulaiman 36. 187724 Cheng Young Jin 37. 189405 Chew Wen Yao 38. 187463 Cheong Wei Mun 39. 185133 Nurul 'Illya Binti Muhamad Fauzi 40. 184391 Nur Syahirah Binti Mat Tajudin

PUBLICATIONS Journals

2020 1. Mohammed Abu Al Sayyed, Mohd Hafiz Mohd Zaid, Nuraidayanie Effendy, Khamirul

Amin Matori, Eloic Lacomme, Karim Al Mahmoud, Maha Mohammed AlShammari, (Co-Author), “The influence of PbO and Bi2O3 on the radiation shielding and elastic features for different glasses”, Journal of Materials Research and Technology, 9(4), 8429-8438, (2020). Impact Factor of 3.327: Q1.

2. Muhammad Faris Syazwan Mohd Shofri, Mohd Hafiz Mohd Zaid, Rabiatul Adawiyah Abdul Wahab, Khamirul Amin Matori, Sidek Hj Ab Aziz, Yap Wing Fen, (Co-Author), “The effect of boron substitution on the glass-forming ability, phase transformation and optical performance of zinc-boro-soda-lime-silicate glasses”, Journal of Materials Research and Technology, 9(4), 6987-6993, (2020). Impact Factor of 3.327: Q1.

3. Thye Foo Choo, Mohamad Amran Mohd Salleh, Kuan Ying Kok, Khamirul Amin Matori, Suraya Abdul Rashid, (Co-Author), “Effect of Temperature on Morphology, Phase Transformations and Thermal Expansions of Coal Fly Ash Cenospheres”, Crystals, 10(6), 481, (2020). Impact Factor of 2.061: Q2.

4. Rohaniah Abdul Jalil, Khamirul Amin Matori, Mohd Hafiz Mohd Zaid, Norhazlin Zainuddin, Mohammad Zulhasif Ahmad Khiri, Nadia Asyikin Abdul Rahman, Wan Nurshamimi Wan Jusoh, Esra Kul, (Corresponding author), “A Study of Fluoride-

33

Containing Bioglass System for Dental Materials Derived from Clam Shell and Soda Lime Silica Glass”, Journal of Spectroscopy, Article in Press, (2020). Impact Factor of 1.376: Q3.

5. Mohammad Zulhasif Ahmad Khiri, Khamirul Amin Matori, Mohd Hafiz Mohd Zaid, Azurahanim Che Abdullah, Norhazlin Zainuddin, Wan Nurshamimi Wan Jusoh, Rohaniah Abdul Jalil, Nadia Asyikin Abdul Rahman, Esra Kul, Siti Aisyah Abdul Wahab, Nuraidayanie Effendy, (Corresponding author), “Soda lime silicate glass and clam Shell act as precursor in synthesize calcium fluoroaluminosilicate glass to fabricate glass ionomer cement with different ageing time”, Journal of Materials Research and Technology, Article in Press, (2020). Impact Factor of 3.327: Q1.

6. Dur Iffa Saparuddin, Noor Aizat Noor Hisham, Sidek Ab Aziz, Khamirul Amin Matori, Sawao Honda, Yuji Iwamoto, Mohd Hafiz Mohd Zaid, (Co-Author), “Effect of sintering temperature on the crystal growth, microstructure and mechanical strength of foam glass-ceramic from waste materials”, Journal of Materials Research and Technology, Article in Press, (2020). Impact Factor of 3.327: Q1.

7. Meysam Toozandehjani, Khamirul Amin Matori, Farhad Ostovan, Khairur Rijal Jamaludin, Astuty Amrin, Ehsan Shafiei, (Co-Author), “The Effect of the Addition of CNTs on the Microstructure, Densification and Mechanical Behavior in Al-CNT-Al2O3 Hybrid Nanocomposites”, JOM, 1-12, (2020). Impact Factor of 2.305: Q1.

8. Thye Foo Choo, Mohd Salleh, Mohamad Amran, Kuan Ying Kok, Khamirul Amin Matori, Suraya Abdul Rashid, (Co-Author), “Characterization of High-Temperature Hierarchical Porous Mullite Washcoat Synthesized Using Aluminum Dross and Coal Fly Ash” Crystals, 10(3), 178. (2020). Impact Factor of 2.061: Q2.

9. Ismayadi Ismail, Idza Riati Ibrahim, Khamirul Amin Matori, Zaiki Awang, Muhammad Misbah Muhammad Zulkimi, Fadzidah Mohd Idris, Rodziah Nazlan, Mohd Hafiz Mohd Zaid, Siti Nor Ain Rusly, Mehmet Ertugrul, (Co-Author), “Comparative Study of Single-and Double-Layer BaFe12O19-Graphite Nanocomposites for Electromagnetic Wave Absorber Applications”, Materials Research Bulletin, 110843. (2020). Impact Factor of 3.355: Q2.

10. Idza Riati Ibrahim, Khamirul Amin Matori, Ismayadi Ismail, Zaiki Awang, Siti Nor Ain Rusly, Rodziah Nazlan, Fadzidah Mohd Idris, Muhammad Misbah Muhammad Zulkimi, Nor Hapishah Abdullah, Muhammad Syazwan Mustaffa, Farah Nabilah Shafiee, Mehmet Ertugrul, (Corresponding author), “A Study on Microwave Absorption Properties of Carbon Black and Ni0.6Zn0.4Fe2O4 Nanocomposites by Tuning the Matching-Absorbing Layer Structures”, Scientific Reports, 10 (1), 1-14. (2020). Impact Factor of 4.011: Q1.

11. Ahmad Fahad Ahmad, Sidek Ab Aziz, Suzan Jabbar Obaiys, Mohd Hafiz Mohd Zaid, Khamirul Amin Matori, Kanagesan Samikannu, Umar Sa’as Aliyu, (Co-Author), “Biodegradable Poly (lactic acid)/Poly (ethylene glycol) Reinforced Multi-Walled Carbon Nanotube Nanocomposite Fabrication, Characterization, Properties, and Applications”, Polymers 12 (2), 427. (2020). Impact Factor of 3.164: Q1.

12. Rahayu Emilia Mohamed Khaidir, Yap Wing Fen, Mohd Hafiz Mohd Zaid, Khamirul Amin Matori, Nur Alia Sheh Omar, Muhammad Fahmi Anuar, Siti Aisyah Abdul Wahab, Aisyah Zakiah Khirel Azman, (Co-Author), “Addition of ZnO nanoparticles on waste rice husk as potential host material for red-emitting phosphor”, Materials Science in Semiconductor Processing, 106, 104774, (2020). Impact Factor of 2.722: Q2.

13. Rahayu Emilia Mohamed Khaidir, Yap Wing Fen, Mohd Hafiz Mohd Zaid, Khamirul Amin Matori, Nur Alia Sheh Omar, Muhammad Fahmi Anuar, Siti Aisyah Abdul Wahab, Aisyah Zakiah Khirel Azman, (Co-Author), “Addition of ZnO nanoparticles on waste rice husk as

34

potential host material for red-emitting phosphor”, Applied Sciences 10 (6), 2128, (2020). Impact Factor of 2.217: Q3.

14. Siti Nor Ain Rusly, Ismayadi Ismail, Khamirul Amin Matori, Zulkifly Abbas, Abdul Halim Shaari, Zaiki Awang, Idza Riati Ibrahim, Fadzidah Mohd Idris, Mohd Hafiz Mohd Zaid, Mohd Khairil Adzhar Mahmood, Intan Helina Hasan, (Corresponding author), “Influence of different BFO filler content on microwave absorption performances in BiFeO3/epoxy resin composites” Ceramics International, 46, 737–746, (2020). Impact Factor of 3.450: Q1.

2019 15. Nur Fadilah Baharuddin Pallan, Khamirul Amin Matori, Mansor Hashim, Norhazlin

Zainuddin, Nor Faizah Baharuddin Pallan, Fadzidah Mohd Idris, Idza Riati Ibrahim, Loy Chee Wah, Siti Nor Ain Rusly, Noorfauzana Adnin, Mohammad Zulhasif Ahmad Khiri, Zarifah Nadakkavil Alassan, Nurzilla Mohamed, Mohd Hafiz Mohd Zaid, (Corresponding author), “Effects of Different Sintering Temperatures on Thermal, Physical, and Morphological of SiO2-Na2O-CaO-P2O5 Based Glass-ceramic System from Vitreous and Ceramic Wastes”, Science of Sintering, 51(4), 377-387, (2019). Impact Factor of 0.885: Q3.

16. Rahayu Emilia Mohamed Khaidir, Yap Wing Fen, Mohd Hafiz Mohd Zaid, Khamirul Amin Matori, Nur Alia Sheh Omar, Muhammad Fahmi Anuar, Siti Aisyah Abdul Wahab, Aisyah Zakiah Khirel Azman, (Co-Author), “Exploring Eu3+-doped ZnO-SiO2 glass derived by recycling renewable source of waste rice husk for white-LEDs application”, Results in Physics, 15, 102596, (2019). Impact Factor of 3.042: Q1.

17. Mohd Hafiz Mohd Zaid, Khamirul Amin Matori, Sidek Hj Ab Aziz, Halimah Mohamed Kamari, Yap Wing Fen, Yazid Yaakob, Nor Kamilah Sa'at, Ali Gürol, Erdem Şakar, (Co-Author), “Effect of heat treatment temperature to the crystal growth and optical performance of Mn3O4 doped α-Zn2SiO4 based glass-ceramics”, Results in Physics, 15, 102569, (2019). Impact Factor of 3.042: Q1.

18. Rosnah Nawang, Mohd Zobir Hussein, Khamirul Amin Matori, Che Azurahanim Che Abdullah, Mansor Hashim, (Co-Author), “Physicochemical properties of hydroxyapatite/montmorillonite nanocomposite prepared by powder sintering”, Results in Physics, 15, 102540, (2019). Impact Factor of 3.042: Q1.

19. Thye Foo Choo, Mohamad Amran Mohd Salleh, Kuan Ying Kok, Khamirul Amin Matori, (Co-Author), “Modified cenospheres as non-sacrificial pore-forming agent for porous mullite ceramics”, Ceramics International, 45(17), 21827-21834, (2019). Impact Factor of 3.450: Q1.

20. HAA Sidek, SH Elazoumi, R El-Mallawany, MHM Zaid, KA Matori, MK Halimah, (Co-Author), “Effect of lead and zinc oxides on the thermal properties of tellurite glass systems”, Journal of Non-Crystalline Solids, 523, 119640, (2019). Impact Factor of 2.600: Q1.

21. Thye Foo Choo, Mohd Salleh, Mohamad Amran, Kuan Ying Kok, Khamirul Amin Matori, (Co-Author), “A Review on Synthesis of Mullite Ceramics from IndustrialWastes”, Recycling, 4(3), 39, (2019). Scopus Index Journal.

22. Tasiu Zangina, Jumiah Hassan, Khamirul Amin Matori, Tan Foo Khoon, Makiyyu Abdullahi Musa, (Co-Author), “Analysis of thermal and electrical conductivity properties of Al substitution LiHf2(PO4)3 chemical solid electrolyte”, SN Applied Sciences, 1(8), 863, (2019). Scopus Index Journal.

23. Idza Riati Ibrahim, Mansor Hashim, Ismayadi Ismail, Khamirul Amin Matori, Rodziah Nazlan, Nor Hapishah Abdullah, Wan Norailiana Wan Ab Rahman, Fadzidah Mohd Idris,

35

Norni Hidayawati Mat Daud, (Corresponding author), “Systematic microstructural development with thermal diffusivity behaviour from nanometric to micronic grains of strontium titanate”, Journal of Thermal Analysis and Calorimetry, 137(1), 105-119, (2019). Impact Factor of 2.471: Q2.

24. Ibrahim Mustapha Alibe, Khamirul Amin Matori, Hj Ab Aziz Sidek, Yazid Yaakob, Umer Rashid, Ali Mustapha Alibe, Mohd Hafiz Mohd Zaid, Salisu Nasir, Maharaz Mohammed Nasir, (Corresponding author), “Effects of polyvinylpyrrolidone on structural and optical properties of willemite semiconductor nanoparticles by polymer thermal treatment method”, Journal of Thermal Analysis and Calorimetry, 136(6), 2249-2268, (2019). Impact Factor of 2.471: Q2.

25. Firouz Fadaeifard, Mohamad Reza Pakmanesh, Morteza Shamanian Esfahani, Khamirul Amin Matori, Didier Chicot, (Co-Author), “Nanoindentation Analysis of Friction Stir Welded 6061-T6 Al Alloy in As-Weld and Post Weld Heat Treatment”, Physics of Metals and Metallography, 120(5), 483-491, (2019). Impact Factor of 1.169: Q3.

26. Nuraidayani Effendy, Sidek Hj Ab Aziz, Halimah Mohamed Kamari, Khamirul Amin Matori, Mohd Hafiz Mohd Zaid, (Co-Author), “Enhanced green photoluminescence of erbium doped Zn2SiO4 glass-ceramics as phosphor in optoelectronic devices”, Journal of Alloys and Compounds, 783, 441-447, (2019). Impact Factor of 4.175: Q1.

27. Choo Thye Foo, Mohamad Amran Mohd Salleh, Kok Kuan Ying, Khamirul Amin Matori, (Co-Author), “Mineralogy and thermal expansion study of mullite-based ceramics synthesized from coal fly ash and aluminum dross industrial wastes”, Ceramics International, 45(6), 7488-7494, (2019). Impact Factor of 3.450: Q1.

28. Ismayadi Ismail, Khamirul Amin Matori, Zulkifly Abbas, Muhamad Misbah Muhamad Zulkimi, Fadzidah Mohd Idris, Mohd Hafiz Mohd Zaid, Nurfaziera Rahim, Intan Helina Hasan, Woon Hai Song, (Co-Author), “Single-and double-layer microwave absorbers of cobalt ferrite and graphite composite at gigahertz frequency”, Journal of Superconductivity and Novel Magnetism, 32(4), 935-943, (2019). Impact Factor of 1.130: Q4.

29. Ahmad Fahad Ahmad, Sidek Ab Aziz, Zulkifly Abbas, Suzan Jabbar Obaiys, Khamirul Amin Matori, Mohd Hafiz Mohd Zaid, Haider K Raad, Umar Sa’ad Aliyu, (Co-Author), “Chemically Reduced Graphene Oxide-Reinforced Poly (Lactic Acid)/Poly (Ethylene Glycol) Nanocomposites: Preparation, Characterization, and Applications in Electromagnetic Interference Shielding”, Polymers, 11(4), 661, 1-20, (2019). Impact Factor of 3.164: Q1.

30. Rahayu Emilia Mohamed Khaidir, Yap Wing Fen, Mohd Hafiz Mohd Zaid, Khamirul Amin Matori, Nur Alia Sheh Omar, Muhammad Fahmi Anuar, Siti Aisyah Abdul Wahab, Aisyah Zakiah Khirel Azman, (Co-Author), “Optical band gap and photoluminescence studies of Eu3+-doped zinc silicate derived from waste rice husks”, Optik - International Journal for Light and Electron Optics 182 (2019) 486–495, (2019). Impact Factor of 1.914: Q3.

31. Engku Abd Ghapur Engku Ali, Khamirul Amin Matori, Elias Saion, Sidek Hj Ab Aziz, Mohd Hafiz Mohd Zaid, Ibrahim Mustapha Alibe, (Corresponding author), “Effect of sintering temperatures on structural and optical properties of ZnO-Zn2SiO4 composite prepared by using amorphous SiO2 nanoparticles” Journal of the Australian Ceramic Society, 55(1), 115-122, (2019). Impact Factor of 0.692: Q3.

32. Wan Nurshamimi Wan Jusoh, Khamirul Amin Matori, Mohd Hafiz Mohd Zaid, Norhazlin Zainuddin, Mohammad Zulhasif Ahmad Khiri, Nadia Asyikin Abdul Rahman, Rohaniah Abdul Jalil, Esra Kul, (Corresponding author), “Effect of sintering temperature on physical and structural properties of Alumino-Silicate-Fluoride glass ceramics fabricated

36

from clam shell and soda lime silicate glass”, Results in Physics, 12, 1909-1914, (2019). Impact Factor of 3.042: Q1

33. Nadia Asyikin Abdul Rahman, Khamirul Amin Matori, Mohd Hafiz Mohd Zaid, Norhazlin Zainuddin, Sidek Ab Aziz, Mohammad Zulhasif Ahmad Khiri, Rohaniah Abdul Jalil, Wan Nurshamimi Wan Jusoh, (Corresponding author), “Fabrication of Alumino-Silicate-Fluoride based bioglass derived from waste clam shell and soda lime silica glasses”, Results in Physics, 12, 743–747, (2019). Impact Factor of 3.042: Q1

34. Mohammad Zulhasif Ahmad Khiri, Khamirul Amin Matori, Mohd Hafiz Mohd Zaid, Che Azurahanim Che Abdullah, Norhazlin Zainuddin, Ibrahim Mustapha Alibe, Nadia Asyikin Abdul Rahman, Siti Aisyah Abdul Wahab, Aisyah Zakiah Khirel Azman, Nuraidayani Effendy, (Corresponding author), “Crystallization behavior of low-cost biphasic hydroxyapatite/β-tricalcium phosphate ceramic at high sintering temperatures derived from high potential calcium waste sources”, Results in Physics, 12, 638–644, (2019). Impact Factor of 3.042: Q1

35. Che Zuraini Che Ab Rahman, Kuan-Ying Kok, Khamirul Amin Matori, Nur Ubaidah Saidin, Thye-Foo Choo, Nordin Hj Sabli, Zainal Abidin Talib, Yazid Yaakob, (Corresponding author), “Chemical synthesis and characterization of metal-oxide based electrocatalysts for fuel cell reactions”, AIP Conference Proceedings, 2068 (1), 020060, (2019). Scopus Index Journal.

36. Siti Aisyah Abdul Wahab, Khamirul Amin Matori, Sidek Hj Ab Aziz, Mohd Hafiz Mohd Zaid, Mohd Mustafa Awang Kechik, Aisyah Zakiah Khirel Azman, Rahayu Emilia Mohamed Khaidir, Mohammad Zulhasif Ahmad Khiri, Nuraidayani Effendy, (Corresponding author), “Synthesis of cobalt oxide Co3O4 doped zinc silicate based glass-ceramic derived for LED applications”, Optik - International Journal for Light and Electron Optics, 179, 919-926, (2019). Impact Factor of 1.914: Q3.

37. Tasiu Zangina, Jumiah Hassan, Raba’ah Syahidah Azis, Khamirul Amin Matori, Chifu Ebenezar Ndikilar, Mahraz Muhammad Nasir, Abdussalam Balarabe Suleiman, (Co-Author), “Structure, Thermal and Conductivity Behavior of Vanadium Substituted Li1.4Ti1.6Al0.4(PO4)2.9(VO4)0.1 NASICON-Type”, Solid State Phenomena, 290, 60-64, (2019). Scopus Index Journal.

38. Chee Wah Loy, Khamirul Amin Matori, Norhazlin Zainuddin, Andrew E Whitten, Liliana de Campo, Nur Izzah Md Nasir, Nur Fadilah Baharuddin Pallan, Mohd Hafiz Mohd Zaid, Nadakkavil Alassan Zarifah, Siegbert Schmid, (Corresponding author), “Small Angle Neutron Scattering Study of a Gehlenite-Based Ceramic Fabricated from Industrial Waste”, Solid State Phenomena, 290, 22-28, (2019). Scopus Index Journal.

39. Mohammad Zulhasif Ahmad Khiri, Khamirul Amin Matori, Mohd Hafiz Mohd Zaid, Che Azurahanim Che Abdullah, Norhazlin Zainuddin, Ibrahim Mustapha Alibe, Nadia Asyikin Abdul Rahman, Siti Aisyah Abdul Wahab, (Corresponding author), “The Effect of the pH Values and Sintering Temperatures on the Physical, Structural and Mechanical Properties of Nano Hydroxyapatite Derived From Ark Clam Shells (Anadara Granosa) Prepared Via the Wet Chemical Precipitate Method”, Ceramics–Silikáty, 63(2), 194-203, (2019). Impact Factor of 0.840: Q3.

40. Rabiatul Adawiyah Abdul Wahab, Khamirul Amin Matori, Mazlini Mazlan, Maryam Mohammad, (Co-Author), “Thermal and Microstructural Study on Mullite-Based Ceramics from Rice Husk-Alumina Mixtures” 948, 274-278, Materials Science Forum, (2019). Scopus Index Journal.

2018

37

41. Tasiu Zangina, Jumiah Hassan, Khamirul Amin Matori, Rabaah Syahidah Azis, Chifu Ebenezer Ndikilar, Fatin Hana Naning, (Co-Author), “Dielectric Relaxation Analysis of Chemical Solid Electrolyte Lithium Aluminum Titanium Phosphate”, Asian Journal of Applied Sciences, 11, 46-55, (2018). Scopus Index Journal.

42. EAG Engku Ali, KA Matori, E Saion, S Hj Abdul Aziz, MHM Zaid, IM Alibe, (Corresponding author), “Calcination effect to the physical and optical properties of Zn2SiO4 composite prepared by impregnation of ZnO on SiO2 amorphous nanoparticles”, IOP Conference Series: Materials Science and Engineering, 440 (1), 012036, 1-8, (2018). Scopus Index Journal.

43. Raba’ah Azis, Nor Che Muda, Jumiah Hassan, Abdul Shaari, Idza Ibrahim, Muhammad Mustaffa, Sakinah Sulaiman, Khamirul Matori, Yap Fen, (Co-Author), “Effect of Ratio in Ammonium Nitrate on the Structural, Microstructural, Magnetic, and AC Conductivity Properties of BaFe12O19”, Materials, 11(2190), 1-22, (2018). Impact Factor of 2.467: Q2.

44. Siti Aisyah Abdul Wahab, Khamirul Amin Matori, Sidek Hj Ab Aziz, Mohd Hafiz Mohd Zaid, Mohd Mustafa Awang Kechik, Aisyah Zakiah Khirel Azman, Rahayu Emilia Mohamed Khaidir, Mohammad Zulhasif Ahmad Khiri, Nuraidayani Effendy, (Corresponding author), “Synthesis of cobalt oxide Co3O4 doped zinc silicate based glass-ceramic derived for LED applications” Optik - International Journal for Light and Electron Optics, 179, 919–926, (2018). Impact Factor of 1.191: Q3

45. Muhammad Fahmi Anuar, Yap Wing Fen, Mohd Hafiz Mohd Zaid, Khamirul Amin Matori, Rahayu Emilia Mohamed Khaidir, (Co-Author), “Synthesis and structural properties of coconut husk as potential silica source”, Results in Physics, 11, 1–4, (2018). Impact Factor of 2.147: Q2

46. Nur Fadilah Baharuddin Pallan, NF Adnin, KA Matori, Mansor Hashim, FM Idris, IR Ibrahim, SNA Rusly, MZA Khiri, Rodziah Nazlan, N Hapishah Abdullah, MSE Shafie, RS Aziz, ZN Alassan, N Zainuddin, N Faizah Baharuddin Pallan, Noraziah Ahmad, Maria Nuid, (Corresponding author), “Influence of Microstructural Effect on Microvickers Hardness Properties of SiO2-Na2O-CaO (SNC) Waste Based Glass-ceramic”, Journal of Physics: Conference Series, 1083 (1), 012008, (2018). Scopus Index Journal.

47. Daw Mohammad Abdalhadi, Zulkifly Abbas, Ahmad Fahad Ahmad, Khamirul Amin Matori, Fahmiruddin Esa, (Co-Author), “Controlling the Properties of OPEFB/PLA Polymer Composite by Using Fe2O3 for Microwave Applications”, Fibers and Polymers, 19 (7), 1513-1521, (2018). Impact Factor of 1.353: Q1

48. Aisyah Zakiah Khirel Azman, Khamirul Amin Matori, Sidek Hj Ab Aziz, Mohd Hafiz Mohd Zaid, Siti Aisyah Abdul Wahab, Rahayu Emilia Mohamed Khaidir, (Corresponding author), “Comprehensive study on structural and optical properties of Tm2O3 doped zinc silicate based glass–ceramics”, Journal of Materials Science: Materials in Electronics, 29, 9861–19866, (2018). Impact Factor of 2.324: Q2

49. Raba’ah Syahidah Azis, Sakinah Sulaiman, Idza Riati Ibrahim, Azmi Zakaria, Jumiah Hassan, Nor Nadhirah Che Muda, Rodziah Nazlan, Norlaily M Saiden, Yap Wing Fen, Muhammad Syazwan Mustaffa, Khamirul Amin Matori, (Co-Author), “Influence of pH Adjustment Parameter for Sol–Gel Modification on Structural, Microstructure, and Magnetic Properties of Nanocrystalline Strontium Ferrite”, Nanoscale Research Letters, 13(1), 160, (1-13), (2018). Impact Factor of 3.125: Q2

50. Salah Hassan Alazoumi, Sidek Abdul Aziz, R El-Mallawany, Umar Sa'ad Aliyu, Halimah Mohamed Kamari, Mohd Hafiz Mohd Mohd Zaid, Khamirul Amin Matori, Abdulbaset Ushah, (Co-Author), “Optical properties of zinc lead tellurite glasses” Results in Physics, 9, 1371-1376, (2018). Impact Factor of 2.147: Q2

38

51. Anwar Ali Baqer, Khamirul Amin Matori, Naif Mohammed Al-Hada, Abdul Halim Shaari, Halimah Mohamed Kamari, Elias Saion, Josephine Liew Ying Chyi, Che Azurahanim Che Abdullah, (Corresponding author), “Synthesis and characterization of of binary (CuO)0.6(CeO2)0.4 nanoparticles via a simple heat treatment method”, Results in Physics, 9, 471-478, (2018). Impact Factor of 2.147: Q2

52. Shams AM Issa, MI Sayyed, MHM Zaid, KA Matori, (Corresponding author), “Photon parameters for gamma-rays sensing properties of some oxide of lanthanides”, Results in Physics, 9, 206-210, (2018). Impact Factor of 2.147: Q2

53. BO Elbashir, MG Dong, MI Sayyed, SAM Issa, KA Matori, MHM Zaid, (Co-Author), “Comparison of Monte Carlo simulation of gamma ray attenuation coefficients of amino acids with XCOM program and experimental data”, Results in Physics, 9, 6-11, (2018). Impact Factor of 2.147: Q2

54. MI Sayyed, MY AlZaatreh, KA Matori, HAA Sidek, MHM Zaid, (Co-Author), “Comprehensive study on estimation of gamma-ray exposure buildup factors for smart polymers as a potent application in nuclear industries”, Results in Physics, 9, 585-592, (2018). Impact Factor of 2.147: Q2

55. Tasiu Zangina, Jumiah Hassan, Khamirul Amin Matori, Alex See, Ibrahim Mustapha Alibe, Sadiq Umar, (Co-Author), “Structural, electrical conductivity and dielectric relaxation behavior of LiHf2(PO4)3 ceramic powders”, Journal of the Australian Ceramic Society, 54 (2), 307-316, (2018). Impact Factor of 0.587: Q4

56. Ibrahim Mustapha Alibe, Khamirul Amin Matori, Hj Abdul Aziz Sidek, Yazid Yaakob, Umer Rashid, Ali Mustapha Alibe, Mohd Hafiz Mohd Zaid, Mohammad Zulhasif Ahmad Khiri, (Corresponding author), “Effects of Calcination Holding Time on Properties of Wide Band Gap Willemite Semiconductor Nanoparticles by the Polymer Thermal Treatment Method”, Molecules, 23 (4), 873, (2018). Impact Factor of 3.098: Q2

57. SH Elazoumi, HAA Sidek, YS Rammah, R El-Mallawany, MK Halimah, KA Matori, MHM Zaid, (Co-Author), “Effect of PbO on Optical Properties of Tellurite Glass”, Results in Physics, 8, 16–25, (2018). Impact Factor of 2.147: Q2

58. M.I. Sayyed, M. G. Dong, M. H. M. Zaid, K. A. Matori, H. A. A. Sidek, V.P. Singh, (Corresponding author), “Effect of Bismuth in Lead Germanate Glass System on Shielding Properties for Development of Gamma-Rays Shielding Materials”, Digest Journal of Nanomaterials and Biostructures, 13(1), 1 – 6, (2018). Impact Factor of 0.673: Q4

59. Arshin Oskoueian, Khamirul Amin Matori, Saadi Bayat, Ehsan Oskoueian, Farhad Ostovan, and Meysam Toozandehjani, (Corresponding author), “Fabrication, Characterization, and Functionalization of Single-Walled Carbon Nanotub e Conjugated with Tamoxifen and Its Anticancer Potential against Human Breast Cancer Cells”, Journal of Nanomaterials, (2018), 8417016, 1-13, (2018). Impact Factor of 2.207: Q2

60. Anwar Ali Baqer, Khamirul Amin Matori, Naif Mohammed Al-Hada, Halimah Mohamed Kamari, Abdul Halim Shaari, Elias Saion, Josephine Liew Ying Chyi, (Corresponding author), “Copper oxide nanoparticles synthesized by a heat treatment approach with structural, morphological and optical characteristics”, Journal of Materials Science: Materials in Electronics, 29(2), 1025–1033, (2018). Impact Factor of 2.324: Q2

61. A.N. Fauzana, K.A. Matori, R.S. Azis, N. Zainuddin, B.N. Fadilah, N.A. Zarifah, M.H.M. Zaid, (Corresponding author), “Parallel Evolution of Microstructure and Mechanical Properties of Bioglass/Hydroxyapatite Composites”, Journal of Materials Science & Surface Engineering, 6(2): 773-778, (2018). Scopus Index Journal.

39

62. Ibrahim Mustapha Alibe, Khamirul Amin Matori, Hj Abdul Aziz Sidek, Yakoob Yazid, Elias Saion, Ali Mustapha Alibe, Mohd Hafiz Mohd Zaid, Engku Abd Ghapur Engku Ali, Tasiu Zangina, (Corresponding author), “The Influence of Calcination Temperature on Structural and Optical Properties of ZnO-SiO2 Nanocomposite by Simple Thermal Treatment Route”, Archives of Metallurgy and Materials, 63(2), 539-545. (2018). Impact Factor of 0.571: Q3

63. Engku Abd Ghapur Engku Ali, Khamirul Amin Matori, Elias Saion, Sidek Hj. Ab Aziz, Mohd Hafiz Mohd Zaid, Ibrahim Mustapha Alibe, (Corresponding author), “Effect of sintering temperatures on structural and optical properties of ZnO-Zn2SiO4 composite prepared by using amorphous SiO2 nanoparticles”, Journal of the Australian Ceramic Society, Article in Press, (2018). Impact Factor of 0.587: Q4

64. Siti Nor Ain Rusly, Khamirul Amin Matori, Ismayadi Ismail, Zulkifly Ab bas, Zaiki Awang, Fadzidah Mohd Idris, Idza Riati Ibrahim, (Corresponding author), “Effects of crystalline phase formation of multiferroic BiFeO3 on microwave absorption characteristics”, Journal of Materials Science: Materials in Electronics, 29(15), 13229–13240, (2018). Impact Factor of 2.324: Q2

65. Siti Nor Ain Rusly, Khamirul Amin Matori, Ismayadi Ismail, Zulkifly Abbas, Zaiki Awang Muhammad Misbah Muhamad Zulkimi, Fadzidah Mohd Idris, Mohd Hafiz Mohd Zaid, Nor Dalilah Zulfikri, (Corresponding author), “Microwave absorption properties of single- and double-layer coatings based on strontium hexaferrite and graphite nanocomposite”, Journal of Materials Science: Materials in Electronics, 29(16), 14031–14045, (2018). Impact Factor of 2.324: Q2

66. Chee Wah Loy, Andrew E. Whitten, Liliana de Campo, Dominique Appadoo, Norhazlin Zainuddin, Khamirul Amin Matori, Christine Rehm, Anna Sokolova, Chunhai Wang, Qingbo Xia, Thomas A. Whittle, Siegbert Schmid, (Co-Author), “Investigation of the siliceous hydrogel phase formation in glass-ionomer cement paste”, Physica B: Condensed Matter, 551, 287–290, (2018). Impact Factor of 3.813: Q2

2017 67. Nurzilla Mohamed, Jumiah Hassan, Khamirul Amin Matori, Zaidan Abdul Wahab,

Zamratul Maisarah Mohd Ismail, Nur Fadilah Baharuddin, Siti Syuhaida Abdul Rashid, (Co-Author), “Influence of Pr doping on the thermal, structural and optical properties of novel SLS-ZnO glasses for red phosphor”, Results in Physics, 7, 1202-1206, (2017). Impact Factor of 2.147: Q2

68. Ali Jabbar Abed Al-Nidawi, Khamirul Amin Matori, Azmi Zakaria, Mohd Hafiz Mohd Zaid, (Corresponding author), “Effect of MnO2 doped on physical, structure and optical properties of zinc silicate glasses from waste rice husk ash”, Results in Physics, 7, 955-961, (2017). Impact Factor of 2.147: Q2

69. Anwar Ali Baqer, Khamirul Amin Matori, Naif Mohammed Al-Hada, Abdul Halim Shaari, Elias Saion, Josephine Liew Ying Chyi, (Corresponding author), “Effect of polyvinylpyrrolidone on cerium oxide nanoparticle characteristics prepared by a facile heat treatment technique”, Results in Physics, 7, 611-619, (2017). Impact Factor of 2.147: Q2

70. Oluwatosin Job Ojo-kupoluyi, Suraya Mohd Tahir, Mohamed Ariff Azmah Hanim, B.T. Hang Tuah Baharudin, Khamirul Amin Matori and Mohd Shamsul Anuar, “Densification rate and interfacial adhesion of bilayer cemented tungsten carbide and steel”, International Journal of Materials Research, 108(12), 1090-1098, (2017). Impact Factor of 0.748: Q3

71. Chee Wah Loy, Andrew E Whitten, Liliana de Campo, Dominique Appadoo, Norhazlin Zainuddin, Khamirul Amin Matori, Christine Rehm, Anna Sokolova, Chunhai Wang, Qingbo Xia, Thomas A Whittle, Siegbert Schmid, “Investigation of the siliceous hydrogel

40

phase formation in glass-ionomer cement paste”, Physica B: Condensed Matter, 2017, Article in Press, (2017). Impact Factor of 1.453: Q3

72. CS Lee, KA Matori, SH Ab Aziz, HM Kamari, I Ismail, MHM Zaid, “Fabrication and characterization of glass and glass-ceramic from rice husk ash as a potent material for opto-electronic applications”, Journal of Materials Science: Materials in Electronics, 28(23), 17611-17621, (2017). Impact Factor of 2.324: Q2

73. Meysam Toozandehjani, Khamirul Amin Matori, Farhad Ostovan, Sidek Abdul Aziz, Md Shuhazlly Mamat, (Corresponding author), “Effect of Milling Time on the Microstructure, Physical and Mechanical Properties of Al-Al2O3 Nanocomposite Synthesized by Ball Milling and Powder Metallurgy” Materials, 10 (11), 1232, (2017). Impact Factor of 2.467: Q2

74. Leila Gharibshahi, Elias Saion, Elham Gharibshahi, Abdul Halim Shaari, Khamirul Amin Matori, “Influence of Poly(vinylpyrrolidone) concentration on properties of silver nanoparticles manufactured by modified thermal treatment method”, PloS one, 12(10), e0186094, 1-17, (2017). Impact Factor of 2.806: Q1

75. Mohammed Sabah Ali, M. A. Azmah Hanim, S. M. Tahir, C. N. A. Jaafar, M. Norkhairunnisa, Khamirul Amin Matori, “The effect of nano-copper additives on the porosity, mechanical properties, and microstructure of alumina ceramics using commercial rice husk ash as a pore former”, Journal of the Australian Ceramic Society, 53(2), 963-974, (2017). Impact Factor of 0.960: Q2

76. Chee W Loy, Khamirul A Matori, Norhazlin Zainuddin, Andrew E Whitten, Christine Rehm, Liliana de Campo, Anna Sokolova, Siegbert Schmid, “Crystallographic characterization of fluorapatite glass-ceramics synthesized from industrial waste”, Powder Diffraction, 1-5, (2017). Impact Factor of 0.674: Q3

77. Rosiah Osman, Nor Hapishah Abdullah, Alaa Husain, Mohd Nizar Hamidon, Intan Helina Hasan, Khamirul Amin Matori, (Co-Author), “Dielectric properties of ceramic materials obtained from rice husk for electronic applications”, IEEE Regional Symposium on Micro and Nanoelectronics (RSM), 224-226, (2017). Scopus Index Journal

78. SH Alazoumi, HAA Sidek, MK Halimah, KA Matori, MHM Zaid, AA Abdulbaset, (Co-Author), “Synthesis and Elastic Properties of Ternary ZnO-PbO-TeO2 Glasses”, Chalcogenide Letters, 14(8), 1-5, (2017). Impact Factor of 0.732: Q4

79. BO El-bashir, MI Sayyed, MHM Zaid, KA Matori, (Corresponding author), “Comprehensive study on physical, elastic and shielding properties of ternary BaO-Bi2O3-P2O5 glasses as a potent radiation shielding material”, Journal of Non-Crystalline Solids, 468, 92–99, (2017). Impact Factor of 1.825: Q1

80. I. M. Alibe, K. A. Matori, E. Saion, A. M. Ali, M. H. M. Zaid, (Corresponding author), “The Influence of Calcination Temperature on Structural and Optical Properties of ZnO Nanoparticles via Simple Polymer Synthesis Route” Science of Sintering, 49(3), 263-275, (2017). Impact Factor of 0.736: Q3

81. Zamratul, M.I.M., Zaidan, W.A., Khamirul, A.M., Halim, S.A., Raba’ah, S.A., Nurzilla, M., Nur Fadilah, B.P., (Co-Author), “Novel eco-friendly synthesis of neodymium doped zinc silicate phosphor based waste glass ceramic: structural, thermal and luminescence properties”, Journal of Materials Science: Materials in Electronics, 28 (13), 9395-9402, (2017). Impact Factor of 1.798: Q2

82. Chee Sun Lee, Khamirul Amin Matori, Sidek Hj Ab Aziz, Halimah Mohamed Kamari, Ismayadi Ismail, Mohd Hafiz Mohd Zaid, (Corresponding author), “Influence of zinc oxide on the physical, structural and optical band gap of zinc silicate glass system from

41

waste rice husk ash”, Optik-International Journal for Light and Electron Optics, 136, 129–135, (2017). Impact Factor of 0.742: Q4

83. Mehran Tamjidy, BT Baharudin, Shahla Paslar, Khamirul Amin Matori, Shamsuddin Sulaiman, Firouz Fadaeifard, (Co-Author), “Multi-Objective Optimization of Friction Stir Welding Process Parameters of AA6061-T6 and AA7075-T6 Using a Biogeography Based Optimization Algorithm”, Materials, 10(5), 533, (2017). Impact Factor of 2.728: Q1

84. Mohammed Sabah Ali, Azmah MA, SM Tahir, CNA Jaafar, M Norkhairunnisa, Khamirul Amin Matori, (Co-Author), “Preparation and characterization of porous alumina ceramics using different pore agents”, Journal of the Ceramic Society of Japan, 125(5), 402-412, (2017). Impact Factor of 0.828: Q2

85. Nur Alia Sheh Omar, Yap Wing Fen, Khamirul Amin Matori, (Co-Author), “Europium doped low cost Zn2SiO4 based glass ceramics: A study on fabrication, structural, energy band gap and luminescence properties”, Materials Science in Semiconductor Processing, 61, 27–34, (2017). Impact Factor of 2.264: Q1

86. Karima Amer Almasri, Sidek Hj. Ab Aziz, Khamirul Amin Matori, Mohd Hafiz Mohd Zaid, (Co-Author), “Effect of sintering temperature on physical, structural and optical properties of wollastonite based glass-ceramic derived from waste soda lime silica glasses”, Results in Physics, 7, 2242-2247, (2017). Impact Factor of 1.337: Q2

87. Leila Gharibshahi, Elias Saion, Elham Gharibshahi, Abdul Halim Shaari, Khamirul Amin Matori, (Co-Author), “Structural and Optical Properties of Ag Nanoparticles Synthesized by Thermal Treatment Method”, Materials, 10(4), 402, 1-13, (2017). Impact Factor of 2.728: Q1

88. Siti Syuhaida Abdul Rashid, Sidek Hj Ab Aziz, Khamirul Amin Matori, Mohd Hafiz Mohd Zaid, Nurzilla Mohamed, (Co-Author), “Comprehensive study on effect of sintering temperature on the physical, structural and optical properties of Er3+ doped ZnO-GSLS glasses”, Results in Physics, 7, 2224–2231, (2017). Impact Factor of 1.337: Q2

89. EAG Ali, KA Matori, E Saion, HAA Sidek, MHM Zaid, IM Alibe, (Corresponding author), “Effect of Reaction Time on Structural and Optical Properties of Porous SiO2 Nanoparticles”, Digest Journal of Nanomaterials and Biostructures, 12 (2), 441-447, (2017). Impact Factor of 0.836: Q4

90. HJ Quah, Z Hassan, FK Yam, NM Ahmed, MAM Salleh, KA Matori, WF Lim, (Co-Author), “Effects of ammonia-ambient annealing on physical and electrical characteristics of rare earth CeO2 as passivation film on silicon”, Journal of Alloys and Compounds, 695, 3104-3115, (2017). Impact Factor of 3.014: Q1

91. Firouz Fadaeifard, Khamirul Amin Matori, Sidek Abd Aziz, Liyana Zolkarnain, Mohd Aliff Zairie Abdul Rahim, (Corresponding author), “Effect of the Welding Speed on the Macrostructure, Microstructure and Mechanical Properties of AA6061-T6 Friction Stir Butt Welds”, Metals, 7(2), 48, 1-16, (2017). Impact Factor of 1.574: Q1

92. Nuraidayani Effendy, Zaidan Abdul Wahab, Sidek Hj. Abdul Aziz, Khamirul Amin Matori, Mohd Hafiz Mohd Zaid, and Siti Syuhaida Abdul Rashid, (Co-Author), “Characterization and optical properties of erbium oxide doped ZnO–SLS glass for potential optical and optoelectronic materials”, Materials Express, 7, 59–65, (2017). Impact Factor of 1.606: Q3

93. KA Matori, MI Sayyed, HAA Sidek, MHM Zaid, VP Singh, (Corresponding author), “Comprehensive study on physical, elastic and shielding properties of lead zinc phosphate glasses”, Journal of Non-Crystalline Solids, 457, 97-103, (2017). Impact Factor of 1.825: Q1

42

94. Mohammed Sabah Ali, M. A. Azmah Hanim, S. M. Tahir, C. N. A. Jaafar, Norkhairunnisa Mazlan, Khamirul Amin Matori, (Co-Author), “The Effect of Commercial Rice Husk Ash Additives on the Porosity, Mechanical Properties, and Microstructure of Alumina Ceramics”, Advances in Materials Science and Engineering, 2017, 2586026, 1-10, (2017). Impact Factor of 1.010: Q3

95. Naif Mohammed Al-Hada, Halimah Mohamed Kamari, Che Azurahanim Che Abdullah, Elias Saion, Abdul H Shaari, Zainal Abidin Talib, Khamirul Amin Matori, (Co-Author), “Down-top nanofabrication of binary (CdO)x(ZnO)1-x nanoparticles and their antibacterial activity”, International Journal of Nanomedicine, 12, 8309-8323, (2017). Impact Factor of 4.300: Q1

96. AA Baqer, KA Matori, NM Al-Hada, AH Shaari, E Saion, JLY Chyi, (Corresponding author), “Synthesis, Structural and Optical Properties of Cerium Oxide Nanoparticles Prepared by Thermal Treatment Method”, Solid State Phenomena, 268, 132-137, (2017). Scopus Index Journal

97. SAM Issa, MI Sayyed, MHM Zaid, KA Matori, (Co-Author), “A Comprehensive Study on Gamma Rays and Fast Neutron Sensing Properties of GAGOC and CMO Scintillators for Shielding Radiation Applications”, Journal of Spectroscopy, 2017, 9792816, 1-9, (2017). Impact Factor of 1.798: Q2

98. CS Lee, K Amin Matori, SH Ab Aziz, HM Kamari, I Ismail, MH Mohd Zaid, (Corresponding author), “Comprehensive Study on Elastic Moduli Prediction and Correlation of Glass and Glass Ceramic Derived from Waste Rice Husk”, Advances in Materials Science and Engineering, 2017, 8962986, 1-10, (2017). Impact Factor of 1.010: Q3

99. MI Sayyed, MY AlZaatreh, MG Dong, MHM Zaid, KA Matori, HO Tekin, (Corresponding author), “A comprehensive study of the energy absorption and exposure buildup factors of different bricks for gamma-rays shielding”, Results in Physics, 7, 2528-2533, (2017). Impact Factor of 1.337: Q2

100. Oluwatosin Job Ojo-Kupoluyi, Suraya Mohd Tahir, Mohamed Ariff Azmah Hanim, BT bin Baharudin, Khamirul Amin Matori, Mohd Shamsul Anuar, (Co-Author), “Sintering Behaviour of Cemented Tungsten Carbide and Steel Bilayer”, Key Engineering Materials, 740, 60-64, (2017). Scopus Index Journal

101. Mohd Hafiz Mohd Zaid, Khamirul Amin Matori, Sidek Hj Ab Aziz, Halimah Mohamed Kamari, Ismayadi Ismail, Nur Farhana Samsudin, Siti Syuhaida Abdul Rashid, (Corresponding author), “Enhanced luminescence properties of low-cost Mn2+ doped willemite based glass–ceramics as potential green phosphor materials”, Journal of Materials Science: Materials in Electronics, 28, 12282–12289, (2017). Impact Factor of 1.798: Q2

102. OJ Ojo-kupoluyi, SM Tahir, MA Azmah Hanim, BTHT Baharudin, KA Matori, MS Anuar, (Co-Author), “Role of carbon addition on the microstructure and mechanical properties of cemented tungsten carbide and steel bilayer”, The International Journal of Advanced Manufacturing Technology, 92, 3363–3371, (2017). Impact Factor of 2.209: Q2

103. GV Sarrigani, KA Matori, IS Amiri, H Ahmad, F Fadaeifard, (Corresponding author), “Dual-Wavelength Generation with Terahertz Spacing Using GaAs–AlGaAs Microring Resonator Waveguides” Journal of Computational and Theoretical Nanoscience, 14(1), 330-334, (2017). Impact Factor of 1.666: Q2

104. Mohd Hafiz Mohd Zaid, Khamirul Amin Matori, Sidek Hj. Ab Aziz, Zaidan Abdul Wahab, Siti Syuhaida Abdul Rashid, (Corresponding author), “Effect of Sintering on

43

Crystallization and Structural Properties of Soda Lime Silica Glass”, Science of Sintering, 49(4), 409-417, (2017). Impact Factor of 0.736: Q3

105. Rabiatul Adawiyah Abdul Wahab, Mohd Ashmir Yahya, Khamirul Amin Matori, Wan Azlina Wan Abdul Karim Ghani, (Co-Author), “Effects of Sintering Temperature on the Mullite-Based Ceramics Fabricated from Rice Husk Ash”, Applied Mechanics and Materials, 873, 65-70, (2017). Scopus Index Journal

2016 106. Firouz Fadaeifard, Khamirul Amin Matori, Farhad Garavi, Muath Al-Falahi, Gholamreza

Vahedi Sarrigani, (Corresponding author), “Effect of post weld heat treatment on microstructure and mechanical properties of gas tungsten arc welded AA6061-T6 alloy” Transactions of Nonferrous Metals Society of China, 26(12), 3102–3114, (2016). Impact Factor of 1.340: Q2

107. Al-Falahi, M., Baharudin, B.T., Hong, T.S., Matori, K.A., (Co-Author), “Surface Defects in Groove Milling of Hastelloy-C276 Under Fluid Coolant”, Materials and Manufacturing Processes, 31(13), 1724-1732, (2016). Impact Factor of 1.419: Q3

108. Chee Wah Loy, Khamirul Amin Matori, Way Foong Lim, Siegbert Schmid, Norhazlin Zainuddin, Zaidan Abdul Wahab, Zarifah Nadakkavil Alassan, Mohd Hafiz Mohd Zaid, (Corresponding author), “Effects of Calcination on the Crystallography and Nonbiogenic Aragonite Formation of Ark Clam Shell under Ambient Condition”, Advances in Materials Science and Engineering, 2016 (2914368), 1-7, (2016). Impact Factor of 1.010: Q3

109. Farhad Ostovan, Khamirul Amin Matori, Meysam Toozandehjani, Arshin Oskoueian, Hamdan Mohamed Yusoff, Robiah Yunus, Azmah Hanim Mohamed Ariff, (Corresponding author), “Nanomechanical Behavior of Multi-Walled Carbon Nanotubes Particulate Reinforced Aluminum Nanocomposites Prepared by Ball Milling”, Materials, 9(3), 140, (2016). Impact Factor of 2.728: Q1

110. F. Ostovan, K.A. Matori, H.M. Yusoff, R. Yunus, A.H.M. Ariff, M. Toozandehjani, M.R. Meschian, (Corresponding author), “Investigation of the Structure and Hardness of Quenched Sintered Materials Produced from Iron-Base Alloyed Powders (Astaloy E)”, Metal Science and Heat Treatment, 58(7-8), 431-434, (2016). Impact Factor of 0.254: Q4

111. Gharavi, F., Fadaeifard, F., Matori, K.A., Yunus, R., Othman, N.K., (Corresponding author), “Mechanical and structural evaluation of friction stir welded 6061 aluminium alloy lap joints at different welding speeds”, Kovove Materialy, 54(5), 351-361, (2016). Impact Factor of 0.365: Q4

112. Gharavi, F., Matori, K.A., Yunus, R., Othman, N.K., Fadaeifard, F., (Corresponding author), “Corrosion evaluation of friction stir welded lap joints of AA6061-T6 aluminum alloy” Transactions of Nonferrous Metals Society of China, 26 (3), 684-696, (2016). Impact Factor of 1.340: Q2.

113. Ghazali, M.S.M., Abdullah, W.R.W., Zakaria, A., Rizwan, Z., Matori, K.A., Zaid M.H.M., (Co-Author), “Effect of MnO2 doping on nonlinear coefficeint of Zn-Bi-Ti-O varistor ceramics”, Jurnal Teknologi, 78(3), 185–190, (2016). Scopus Index Journal

114. H.A.A. Sidek, R El-Mallawany, K.A. Matori, M.K. Halimah, (Co-Author), “Effect of PbO on the elastic behavior of ZnO–P2O5 glass systems”, Results in Physics, 6, 449-455, (2016). Impact Factor of 1.337: Q2

115. Idza Riati Ibrahim, Mansor Hashim, Zaidan Abdul Wahab, Khamirul Amin Matori, Rodziah Nazlan, Ismayadi Ismail, Nor Hapishah Abdullah, Wan Ab Rahman, Wan Norailiana, Fadzidah Mohd Idris, (Co-Author), “Influence of Parallel Evolving Microstructure on Thermal Diffusivity in Strontium Titanate”, Materials Science Forum, 846, 416-425, (2016). Scopus Index Journal

44

116. Mas’Ut, A.M., Zaidan Abdul Wahab, Wan Mahmood Mat Yunus, Khamirul Amin Matori, (Co-Author), “Effects of H2 and CO on Electrical Properties of Pure SnO2 and Pt-Doped SnO2 Ceramics”, Materials Science Forum, 846, 91-95, (2016). Scopus Index Journal

117. Mohammad Zulhasif Ahmad Khiri, Khamirul Amin Matori, Norhazlin Zainuddin, Che Azurahanim Che Abdullah, Zarifah Nadakkavil Alassan, Nur Fadilah Baharuddin, Mohd Hafiz Mohd Zaid, (Corresponding author), “The usability of ark clam shell (Anadara granosa) as calcium precursor to produce hydroxyapatite nanoparticle via wet chemical precipitate method in various sintering temperature”, SpringerPlus, 5 (1), 1206, (2016). Impact Factor of 0.982: Q2

118. Meysam Toozandehjani, Faizal Mustapha, Mohd Khairol Anuar Ariffin, Nur Ismarrubie Zahari, Khamirul Amin Matori, Farhad Ostovan, Firouz Fadaeifard, (Co-Author), “Effect of Artificial Aging on the Microstructure and Mechanical Properties of Aluminum Alloy AA6061-T6”, Metal Science and Heat Treatment, 58(5-6), 283-286, (2016). Impact Factor of 0.254: Q4

119. Mohd Hafiz Mohd Zaid, Khamirul Amin Matori, Sidek Hj Ab Aziz, Halimah Mohamed Kamari, Zaidan Abdul Wahab, Nuraidayani Effendy, Ibrahim Mustapha Alibe, (Corresponding author), “Comprehensive study on compositional dependence of optical band gap in zinc soda lime silica glass system for optoelectronic applications”, Journal of Non-Crystalline Solids, 449, 107-112, (2016). Impact Factor of 1.825: Q1

120. Mohd Hafiz Mohd Zaid, Khamirul Amin Matori, Sidek Hj Abdul Aziz, Halimah Mohamed Kamari, Zaidan Abdul Wahab, Yap Wing Fen, Ibrahim Mustapha Alibe, (Corresponding author), “Synthesis and characterization of low cost willemite based glass–ceramic for opto-electronic applications”, Journal of Materials Science: Materials in Electronics, 27 (11), 11158-11167, (2016). Impact Factor of 1.798: Q2

121. Mohd Hafiz Mohd Zaid, Khamirul Amin Matori, Sidek Hj Abdul Aziz, Halimah Mohamed Kamari, Wan Mahmood Mat Yunus, Zaidan Abdul Wahab, Nur Farhana Samsudin, (Corresponding author), “Fabrication and Crystallization of ZnO-SLS Glass Derived Willemite Glass-Ceramics as a Potential Material for Optics Applications”, Journal of Spectroscopy, 2016 (8084301), 1-7, (2016). Impact Factor of 0.814: Q4

122. Noruzaman Daud, Raba’ah Syahidah Azis, Mansor Hashim, Khamirul Amin Matori, Jumiah Hassan, NM Saiden, Mohd Shahrani, Nuraine Mariana, (Co-Author), “Preparation and Characterization of Sr1−xNdxFe12O19 Derived from Steel-Waste Product via Mechanical Alloying”, Materials Science Forum, 846, 403-409, (2016). Scopus Index Journal

123. N. Effendy, Z.A. Wahab, H.M. Kamari, K.A. Matori, S.H. Ab Aziz, M.H.M. Zaid, (Co-Author), “Structural and optical properties of Er3+-doped willemite glass-ceramics from waste materials”, Optik-International Journal for Light and Electron Optics, 127 (24), 11698-11705, (2016). Impact Factor of 0.742: Q4

124. N.A.S. Omar, Y.W. Fen, K.A. Matori, M.H.M. Zaid, N.F. Samsudin, (Co-Author), “Structural and optical properties of Eu3+ activated low cost zinc soda lime silica glasses”, Results in Physics, 6, 640-644, (2016). Impact Factor of 1.337: Q2

125. Nur Alia Sheh Omar, Yap Wing Fen, Khamirul Amin Matori, Mohd Hafiz Mohd Zaid, Mohd Rasdi Norhafizah, Mohammad Nurzilla, Mohd Ismail Maisarah Zamratul, (Co-Author), “Synthesis and optical properties of europium doped zinc silicate prepared using low cost solid state reaction method”, Journal of Materials Science: Materials in Electronics, 27 (2), 1092-1099, (2016). Impact Factor of 1.798: Q2

45

126. N.A.S. Omar, Y.W. Fen, K.A. Matori, (Co-Author), “Photoluminescence properties of Eu3+-doped low-cost zinc silicate based glass ceramics”, Optik-International Journal for Light and Electron Optics, 127 (8), 3727-3729, (2016). Impact Factor of 0.742: Q4

127. N.A.S. Omar, Fen, Y.W., Matori, K.A., Aziz, S.H.A., Alassan, Z.N., Samsudin N.F., (Co-Author), “Development and Characterization Studies of Eu3+-doped Zn2SiO4 Phosphors with Waste Silicate Sources”, Procedia Chemistry, 19, 21-29, (2016). Scopus Index Journal

128. Nur Farhana Samsudin, Khamirul Amin Matori, Zaidan Abdul Wahab, Josephine Ying Chi Liew, Yap Wing Fen, Sidek Hj Ab Aziz, Mohd Hafiz Mohd Zaid, (Corresponding author), “Low cost phosphors: Structural and photoluminescence properties of Mn2+-doped willemite glass-ceramics”, Optik-International Journal for Light and Electron Optics, 127, 8076-8081, (2016). Impact Factor of 0.742: Q4

129. Nur Farhana Samsudin, Khamirul Amin Matori, Zaidan Abdul Wahab, Yap Wing Fen, Josephine Ying Chi Liew, Way Foong Lim, Mohd Hafiz Mohd Zaid, Nur Alia Sheh Omar, (Corresponding author), “Manganese modified structural and optical properties of zinc soda lime silica glasses”, Applied optics, 55(9), 2182-2187, (2016). Impact Factor of 1.598: Q3

130. N.F. Samsudin, Matori, K.A., Fen, Y.W., Chyi, J.L.Y., Omar, N.A.S., Alassan Z.N., (Corresponding author), “Optical and Structural Properties of Zn2SiO4: Mn2+ from SLS Waste Bottle Obtained by a Solid-State Method”, Procedia Chemistry, 19, 57-67, (2016). Scopus Index Journal

131. Nur Fadilah Baharuddin Pallan, Khamirul Amin Matori, Mansor Hashim, Way Foong Lim, Hock Jin Quah, A.N. Fauzana, N. Rosnah, M.Z.A Khiri, S. Farhana, Z. Norhazlin, N.A. Zarifah, M. Nurzilla, Mohd Zaid Mohd Hafiz, C.W. Loy, M.I.M. Zamratul, (Corresponding author), “Preparation of SiO2-Na2O-CaO-P2O5 Glass-Ceramic from Waste Materials and Heat Treatment Effects on its Morphology”, Materials Science Forum, 846, 189-192, (2016). Scopus Index Journal

132. Nurzilla, M., Wahab, Z.A., Hassan, J., Matori, K.A., Zamratul, M.I.M., (Co-Author), “Synthesis and luminescence properties of Pr doped SLS–ZnO glass composite material for red phosphors”, Journal of Materials Science: Materials in Electronics, 27 (12), 13323-13328, (2016). Impact Factor of 1.798: Q2

133. T. Zangina, J. Hassan, K.A. Matori, U. Ahmadu, A. See, (Co-Author), “Sintering behavior, ac conductivity and dielectric relaxation of Li1.3Ti1.7Al0.3(PO4)3 NASICON compound” Results in Physics, 6, 719-725, (2016). Impact Factor of 1.337: Q2

134. Zamratul, M.I.M., A.W. Zaidan, A.M. Khamirul, M. Nurzilla, S.A. Halim, (Corresponding author), “Formation, structural and optical characterization of neodymium doped-zinc soda lime silica-based glass”, Results in Physics, 6, 295-298, (2016). Impact Factor of 1.337: Q2

135. Zarifah, N.A., Matori, K.A., Sidek, H.A.A., Wahab, Z.A., Mohd Salleh, M.A., Zainuddin, N., Khiri, M.Z.A., Farhana, N.S., Omar, N.A.S., (Corresponding author), “Effect of Hydroxyapatite Reinforced with 45S5 Glass on Physical, Structural and Mechanical Properties”, Procedia Chemistry, 19, 30-37, (2016). Scopus Index Journal

136. Mohammed Sabah Ali, M.A. Azmah Hanim, C.N.A. Jaafar, S.M. Tahir, M. Norkhairunnisa and Khamirul Amin Matori, (Co-Author), “Strengthening of Porous Alumina Ceramics Using (Cu) Metal in Nanoscale Particle and Graphite Waste as a Pore Agent”, Journal of Engineering and Applied Sciences, 11, 2713-2722, (2016). Scopus Index Journal

137. I. M. Alibe, K. A. Matori, E. Saion, A. M. Alibe, M. H. M. Zaid, E. A. A. Ghapur Engku, (Corresponding author), “Facile Synthesis of Amorphous Silica Nanoparticles by Simple

46

Thermal Treatment Route” Digest Journal of Nanomaterials and Biostructures, 11(4), 1155-1164, 2016). Impact Factor of 0.673: Q4

2015 138. G.V. Sarrigani, H.J. Quah, W.F. Lim, K.A. Matori, N.S. Mohd Razali, A. Kharazmi, M.

Hashim, H.R. Bahari, (Corresponding author), “Characterization of waste material derived willemite-based glass-ceramics doped with erbium”, Advances in Materials Science and Engineering, 2015 (953659), 1-7, (2015). Impact Factor of 1.010: Q3

139. Farhad Ostovan, Khamirul Amin Matori, Meysam Toozandehjani, Arshin Oskoueian, Hamdan Mohamed Yusoff, Robiah Yunus, Azmah Hanim Mohamed Ariff, (Corresponding author), “Microstructural evaluation of ball-milled nano Al2O3 particulate-reinforced aluminum matrix composite powders”, International Journal of Materials Research, 106(6), 636-640, (2015). Impact Factor of 0.687: Q3

140. M.M. Aiza, A.W. Zaidan, W. Mahmood M. Yunus, A.M. Khamirul, (Co-Author), “Influence of Grain Size on the Thermal Diffusivity of Pt-SnO2 Ceramic”, Advanced Materials Research, 1107, 27-31, (2015). Scopus Index Journal

141. Mohd Ghazali, Mohd Sabri, Azmi Zakaria, Wan Abdullah, Wan Rafizah, Mohd Zaid, Mohd Hafiz, Khamirul Amin Matori, (Co-Author), “Effect of Co3O4 Doping on Nonlinear Coefficient in Zn-Bi-Ti-O Varistor Ceramics”, Advanced Materials Research, 1107, 20-26, (2015). Scopus Index Journal

142. N.H. Bateni, M.N. Hamidon, K.A. Matori, A. Arab, (Corresponding author), “P–E hysteresis loop evaluation and dielectric studies of ceramic obtained from white rice husk ash for electronic applications”, Journal of Materials Science: Materials in Electronics, 26(8), 6157-6162, (2015). Impact Factor of 1.798: Q2

143. Farhad Ostovan, Khamirul Amin Matori, Meysam Toozandehjani, Arshin Oskoueian, Hamdan Mohamed Yusoff, Robiah Yunus, Azmah Hanim Mohamed Ariff, Hock Jin Quah, Way Foong Lim, (Corresponding author), “Effects of CNTs content and milling time on mechanical behavior of MWCNT-reinforced aluminum nanocomposites”, Materials Chemistry and Physics, 166, 160-166, (2015). Impact Factor of 2.101: Q2

144. F. Gharavi, K.A. Matori, R. Yunus, N.K. Othman, F. Fadaeifard, (Corresponding author), “Corrosion behavior of Al6061 alloy weldment produced by friction stir welding process”, Journal of Materials Research and Technology, 4(3), 314-322, (2015). Scopus Index Journal

145. G.V. Sarrigani, K.A. Matori, W.F. Lim, A. Kharazmi, H.J. Quah, H.R. Bahari, M. Hashim, (Corresponding author), “Structural and optical properties of erbium-doped willemite-based glass-ceramics”, Applied Optics, 54(33), 9925-9929, (2015). Impact Factor of 1.598: Q3

146. Nur Farhana Samsudin, Khamirul Amin Matori, Josephine Ying Chi Liew, Yap Wing Fen, Mohd Hafiz Mohd Zaid, Zarifah Nadakkavil Alassan, (Corresponding author), “Investigation on Structural and Optical Properties ofWillemite Doped Mn2+ Based Glass-Ceramics Prepared by Conventional Solid-State Method”, Journal of Spectroscopy, 2015 (730753), 1-7, (2015). Impact Factor of 0.814: Q4

147. Zarifah, N.A., Lim, W.F., Matori, K.A., Sidek, H.A.A., Wahab, Z.A., Zainuddin, N., Salleh, M.A., Fadilah, B.N., Fauzana, A.N., (Corresponding author), “An elucidating study on physical and structural properties of 45S5 glass at different sintering temperatures” Journal of Non-Crystalline Solids, 412, 24-29, (2015). Impact Factor of 1.825: Q1

148. Toozandehjani, M., Matori, K.A., Ostovan, F., Mustapha, F., Zahari, N.I., Oskoueian, A., (Corresponding author), “On the correlation between microstructural evolution and

47

ultrasonic properties: a review”, Journal of Materials Science, 50(7), 2643-2665, (2015). Impact Factor of 2.302: Q2

149. Meysam Toozandehjani, Faizal Mustapha, Mohd Khairol Anuar Ariffin, Nur Ismarrubie Zahari, Khamirul Amin Matori, Farhad Ostovan, (Co-Author), “Characterization of aging behavior of AA6061 aluminum alloy through destructive and ultrasonic non-destructive testing techniques”, Transactions of the Indian Institute of Metals, 68(4), 561–569, (2015). Impact Factor of 0.502: Q3

150. H.A.A. Sidek, R. El-Mallawany, S.S.M Badaron, H.M. Kamari, K.A. Matori, (Co-Author), “Optical Properties of Erbium Zinc Tellurite Glass System” Advances in Materials Science and Engineering, 2015(628954), 1-5, (2015). Impact Factor of 1.010: Q3

151. Khamirul Amin Matori, Mohd Hafiz Mohd Zaid, Hock Jin Quah, Sidek Hj. Abdul Aziz, Zaidan Abdul Wahab, and Mohd Sabri Mohd Ghazali, (Corresponding author), “Studying the Effect of ZnO on Physical and Elastic Properties of (ZnO)x(P2O5)1−x Glasses Using Nondestructive Ultrasonic Method”, Advances in Materials Science and Engineering, 2015(596361), (2015). Impact Factor of 1.010: Q3

152. N. Mohamed Sutan, I. Yakub, M. S. Jaafar, K. A. Matori, and S. K. Sahari, (Co-Author), “Sustainable Nanopozzolan Modified Cement: Characterizations and Morphology of Calcium Silicate Hydrate during Hydration”, Journal of Nanomaterials, 2015(713258), (2015). Impact Factor of 1.758: Q2

153. M.H.M. Zaid, K.A. Matori, H.J. Quah, W.F. Lim, H.A.A. Sidek, M.K. Halimah, W.M.M. Yunus, Z.A. Wahab, (Corresponding author), “Investigation on structural and optical properties of SLS–ZnO glasses prepared using a conventional melt quenching technique”, Journal of Materials Science: Materials in Electronics, 26, 3722–3729, (2015). Impact Factor of 1.798: Q2

154. Khamirul Amin Matori, Mehran Tamjidy, Firouz Fadaeifard, Farhad Gharvi, Hang Tuah Baherodin, Shahla Paslar, (Corresponding author), “Optimization Parameters of Friction Stir Lap Welding of Aluminum Alloy AA6061-T6” Journal of Applied Sciences, 15, 465-473, (2015). Scopus Index Journal

155. A.H.M. Noor, S.H. Ab Aziz, S.S.A. Rashid, M.H.M. Zaid, Z.N. Alassan, K.A. Matori, (Co-Author), “Synthesis and characterization of wollastonite glass-ceramics from eggshell and waste glass”, Journal of Solid State Science and Technology Letters, 16(1-2), 1-5, (2015).

156. Noruzaman Daud, Raba'ah Syahidah Azis, Mansor Hashim, Khamirul Amin Matori, N.M.M. Shahrani, S. Sulaiman, N.N.C. Muda, A.H. Azizan, (Co-Author), “Structural and magnetic properties of SRM0.5FE11.5O19 (M: Ti4+, Co2+, Ni2+, Cu2+, and Zn2+) derived from steel waste product via mechanical alloying”, Journal of Solid State Science and Technology Letters, 16(1-2), 78-82, (2015).

157. I. Balang, N. Mohamed Sutan, I. Yakub, M.S. Jaafar, K.A. Matori, (Co-Author), “Influence of Silica Based Waste Materials on the Mechanical and Physical Properties of Mortar”, Journal of Civil Engineering, Science and Technology, 6 (1), 1-5, (2015).

2014 158. Nur Fatin Syamimi, Khamirul Amin Matori, Way Foong Lim, Sidek Abdul Aziz, and

Mohd Hafiz Mohd Zaid, (Corresponding author), “Effect of Sintering Temperature on Structural and Morphological Properties of Europium (III) Oxide Doped Willemite”, Journal of Spectroscopy, 2014(328931), 1-8, (2014). Impact Factor of 0.814: Q4

159. Yadollah Abdollahi, Azmi Zakaria, Nor Asrina Sairi, Khamirul Amin Matori, Hamid Reza Fard Masoumi, Amir Reza Sadrolhosseini, Hossein Jahangirian, (Co-Author),

48

“Artificial neural network modelling of photodegradation in suspension of manganese doped Zinc oxide nano-particles under visible-light irradiation”, The Scientific World Journal, 2014(726101), (2014). Scopus Index Journal

160. Nasim Heidari Bateni, Mohd Nizar Hamidon, Khamirul Amin Matori, Soodkhet Pojprapai, Puripat Kantha, (Co-Author), “Electrical evaluation of ceramic obtained from white rice husk ash and soda lime silica glass for electronic applications”, Journal of Materials Science: Materials in Electronics, 25(12), 5491-5495, (2014). Impact Factor of 1.798: Q2

161. N.H. Bateni, M.N. Hamidon, K.A. Matori, (Co-Author), “Effect of soda-lime-silica glass addition on the physical properties of ceramic obtained from white rice husk ash”, Journal of the Ceramic Society of Japan, 122(1422), 161-165, (2014). Impact Factor of 0.828: Q2

162. F. Mohamaddoost, H.M. Yusoff, K.A. Matori, F. Ostovan, G.R. Vahedi, (Co-Author), “Bio Ceramic Zirconia/Hydroxyapatite Nano Composite Extracted from Bovine Bone”, Australian Journal of Basic and Applied Sciences, 8(15), 302-306, (2014). Scopus Index Journal

163. M.K. Halimah, W.H. Chiew, H.A.A. Sidek, W.M. Daud, Z.A. Wahab, A.M. Khamirul, S.M. Iskandar, (Co-Author), “Optical Properties of Lithium Borate Glass (Li2O)x(B2O3)1-

x” Sains Malaysiana, 43(6), 899–902, (2014). Impact Factor of 0.350: Q3 164. Firouz Fadaeifard, Farhad Gharavi, Khamirul Amin Matori, Abdul Razak Daud, Mohd

Khairol Anuar Mohd Ariffin and Mokhtar Awang, (Corresponding author), “Investigation of Microstructure and Mechanical Properties of Friction Stir Lap Welded AA6061-T6 in Various Welding Speeds”, Journal of Applied Science, 14(3), 221-228, (2014). Scopus Index Journal

165. F. Fadaeifard, K.A. Matori, M. Toozandehjani, A.R. Daud, M.K.A.M. Ariffin, N.K. Othman, F. Gharavi, A.H. Ramzani, F. Ostovan, (Corresponding author), “Influence of rotational speed on mechanical properties of friction stir lap welded 6061-T6 Al alloy”, Transactions of Nonferrous Metals Society of China, 24(4), 1004-1011, (2014). Impact Factor of 1.340: Q2

166. F. Ostovan, K.A. Matori, H.M. Yusoff, R. Yunus, A.H.M. Ariff, M. Toozandehjani, F. Fadaeifard, M.R. Meschian, (Corresponding author), “Occurrence of Pattern Formation of Microstructural, Physical and Mechanical Properties of Sintered PM Steels Containing Pre-Alloyed Astaloy E Powder”, Transactions of the Indian Institute of Metals, 67(6), 881–888, (2014). Impact Factor of 0.502: Q3

167. Farhad Gharavi, Khamirul Amin Matori, Robiah Yunus, Norinsan Kamil Othman, (Corresponding author), “Investigation of the Nugget Zone Corrosion Behavior in Friction Stir Welded Lap Joints of 6061-T6 Aluminum Alloy”, Materials Research, 17(6), 1563-1574, (2014). Scopus Index Journal

168. F. Gharavi, K.A. Matori, R. Yunus, N.K. Othman, (Corresponding author), “Corrosion behavior of friction stir welded lap joints of AA6061-T6 aluminum alloy”, Materials Research, 17(3), 672-681, (2014). Scopus Index Journal

169. Ghazaleh Bahmanrokh, Mansor Hashim, Khamirul Amin Matori, Manizheh Navasery, Nayereh Soltani, Parisa Vaziri, Samikannu Kanagesan, Rahim Sabbaghizadeh, Mohd Shamsul Ezzad Shafie, (Co-Author), “Recording-media-related morphology and magnetic properties of crystalline CoPt3 and CoPt3-Au core-shell nanoparticles synthesized via reverse microemulsion”, Journal of Applied Physics, 116(9), 093907, 1-10, (2014). Impact Factor of 2.101: Q2

49

170. W.N.A.W. Shaaidi, K.P. Lim, K.A. Matori, E. Saion, A.H. Shaari, S.K. Chen, (Co-Author), “The superconductivity of YBa2Cu3O7-δ reacted with nano-SiC”, Solid State Science and Technology, 22 (1 & 2), 132-138, (2014).

171. Nur’Izzah Md Nasir, Norhazlin Zainuddin, Wan Md Zin Wan Yunus, Khamirul Amin Matori, (Co-Author), “The Influence of Modified Sodium Montmorillonite as Filler on the Performance of Glass Polyalkenoate Cement” The Malaysian Journal of Analytical Sciences, 18(3), 572-583, (2014).

2013 172. V.W. Francis Thoo, N. Zainuddin, K.A. Matori, and S.A. Abdullah, (Co-Author), “Studies

on the Potential of Waste Soda Lime Silica Glass in Glass Ionomer Cement Production”, Advances in Materials Science and Engineering, 2013(395012), 1-6, (2013). Impact Factor of 1.010: Q3

173. Yadollah Abdollahi, Azmi Zakaria, Raba’ah Syahidah Aziz, Siti Norazilah Tamili, Khamirul Amin Matori, Nuraine Mariana Shahrani, Nurhidayati Mohd Sidek, Masoumeh Dorraj, Seyedehmaryam Moosavi, (Co-Author), “Optimizing Bi2O3 and TiO2 to achieve the maximum non-linear electrical property of ZnO low voltage varistor” Chemistry Central Journal, 7:137, 1-10, (2013). Impact Factor of 2.552: Q2

174. Syed Putra Hashim Syed Hashim, Haji Abdul Aziz Sidek, Mohamed Kamari Halimah, Khamirul Amin Matori, Wan Mohamad Daud Wan Yusof and Mohd Hafiz Mohd Zaid, (Co-Author), “The Effect of Remelting on the Physical Properties of Borotellurite Glass Doped with Manganese” International Journal of Molecular Sciences, 14, 1022-1030, (2013). Impact Factor of 3.257: Q2

175. K.A. Matori, M.H.M. Zaid, H.A.A. Sidek, M.K. Halimah and Z.A. Wahab, (Corresponding author), “Study of the elastic properties of (PbO)x(P2O5)1-x lead phosphate glass using an ultrasonic technique”, Journal of Non-Crystalline Solids, 361,78-81, (2013). Impact Factor of 1.825: Q1

176. Yadollah Abdollahi, Azmi Zakaria, Mina Abbasiyannejad, Hamid Reza Fard Masoumi, Mansour Ghaffari Moghaddam, Khamirul Amin Matori, Hossein Jahangirian and Ashkan Keshavarzi, (Co-Author), “Artificial neural network modeling of p-cresol photodegradation” Chemistry Central Journal, 7(96), 1-7, (2013). Impact Factor of 2.552: Q2

2012 177. Khamirul Amin Matori, Loy Chee Wah, Mansor Hashim, Ismayadi Ismail, Mohd Hafiz

Mohd Zaid, (Corresponding author), “Phase transformations of α-alumina from aluminum waste via co-precipitation technique”, International Journal of Molecular Sciences, 13(12), 16812-16821, (2012). Impact Factor of 3.257: Q2

178. Yadollah Abdollahi, Azmi Zakaria, Khamirul Amin Matori, Kamyar Shameli, Hossein Jahangirian, Majid Rezayi, Tahereh Abdollahi, (Co-Author), “Interactions between photodegradation components”, Chemistry Central Journal, 6(100), 1-5, (2012). Impact Factor of 2.552: Q2

179. Haji Abdul Aziz Sidek, Shaharuddin Rosmawati, Halimah Mohamed Kamari, Khamirul Amin Matori, Zainal Abidin Talib, (Co-Author), “Effect of AlF3 on the Density and Elastic Properties of Zinc Tellurite Glass Systems”, Materials, 5(8), 1361-1372, (2012). Impact Factor of 2.728: Q1

180. Haji Abdul Aziz Sidek, Shaharuddin Rosmawati, Halimah Mohamed Kamari, Khamirul Amin Matori, Zainal Abidin Talib, (Co-Author), “Correction: Effect of AlF3 on the

50

Density and Elastic Properties of Zinc Tellurite Glass Systems. Materials, 5(8), 1361-1372”, Materials, 5, 2872-2873, (2012). Impact Factor of 2.728: Q1

181. N. Rodziah, M. Hashim, I.R. Idza, I. Ismayadi, A.N. Hapishah, M.A. Khamirul, (Co-Author), “Dependence of developing magnetic hysteresis characteristics on stages of evolving microstructure in polycrystalline yttrium iron garnet” Applied Surface Science, 258, 2679–2685, (2012). Impact Factor of 3.150: Q1

182. Ismayadi Ismail, Mansor Hashim, Khamirul Amin Matori, Rosidah Alias, Jumiah Hassan, (Co-Author), “Dependence of magnetic properties and microstructure of mechanically alloyed Ni0.5Zn0.5Fe2O4 on soaking time”, Journal of Magnetism and Magnetic Materials, 324, 2463–2470, (2012). Impact Factor of 2.357: Q2

183. Mohd Hafiz Mohd Zaid, Khamirul Amin Matori, Sidek Hj. Abdul Aziz, Azmi Zakaria, Mohd Sabri Mohd Ghazali, (Corresponding author), “Effect of ZnO on the Physical Properties and Optical Band Gap of Soda Lime Silicate Glass” International Journal of Molecular Sciences, 13(6), 7550-7558, (2012). Impact Factor of 3.257: Q2

184. Ismayadi Ismail, Mansor Hashim, Khamirul Amin Matori, Rosidah Alias, Jumiah Hassan, (Co-Author), “The Transition from Paramagnetic to Ferromagnetic States as Influenced by Evolving Microstructure of Ni0.5Zn0.5Fe2O4” The Journal of Superconductivity and Novel Magnetism, 25, 71-77, (2012). Impact Factor of 1.100: Q3

185. M.K. Halimah, W.M. Daud, H.A.A. Sidek, A.W. Zaidan, G. Norzila and Khamirul Amin Matori, (Co-Author), “Effect of PbO on elastic properties of (PbO)x(B2O3)1-x Glass”, Solid State Science and Technology Letters, 19(1&2), 48-54, (2012).

186. Rabiatul Adawiyah M.A., Zaidan A.W., Khamirul A.M. and Aiza M.M., (Co-Author), “Effect of Thermophysical Properties of ZnO System with Different CuO Compositions” Solid State Science and Technology Letters, 19(1&2), 73-81, (2012).

2011 187. M.H.M. Zaid, K. A. Matori, L.C. Wah, H.A.A. Sidek, M.K. Halimah, Z.A. Wahab, B.Z.

Azmi, (Corresponding author), “Elastic moduli prediction and correlation in soda lime silicate glasses containing ZnO”, International Journal of the Physical Sciences, 6(6), 1404-1410, (2011). Scopus Index Journal

188. Ismayadi Ismail, Mansor Hashim, Khamirul Amin Matori, Rosidah Alias, Jumiah Hassan, (Co-Author), “Milling time and BPR dependence on permeability and losses of Ni0.5Zn0.5Fe2O4 synthesized via mechanical alloying process”, Journal of Magnetism and Magnetic Materials, 323, 1470–1476, (2011). Impact Factor of 2.357: Q2

189. J.N. Ayuni, M.K. Halimah, Z.A. Talib, H.A.A. Sidek, W.M. Daud, A.W. Zaidan, A.M. Khamirul, (Co-Author), “Optical Properties of Ternary TeO2-B2O3-ZnO Glass System” IOP Conference Series: Materials Science and Engineering, 17(1), 012-027, (2011). Scopus Index Journal

190. H.A.A. Sidek, S. Rosmawati, K.A. Matori, M.K. Halimah, B.Z. Azmi, (Co-Author), “Elastic constants of (TeO2)90(AlF3) 10-x(ZnO)x zinc oxyfluorotellurite glasses” IOP Conference Series: Materials Science and Engineering, 17(1), 012-031, (2011). Scopus Index Journal

191. W.N.A.W. Shaaidi, K. P. Lim, K. A. Matori, E. Saion, S. A. Halim, and S. K. Chen, (Co-Author), “Superconducting Properties ofY(Ba1-xCax)2Cu3O7-δ(0 ≤ x ≤ 0.05) System”, AIP Conference Proceedings, 1328, 257-260, (2011). Scopus Index Journal

192. Sidek Haji Ab Aziz, Rosmawati Sharuddin, Khamirul Amin Matori, Halimah Mohamed Kamari, (Co-Author), “Elastic moduli of zinc oxyfluorotellurite glasses”, Journal of Materials Science and Engineering, 5 (3), 319-322, (2011). Scopus Index Journal

51

193. S.P.H.S. Hashim, H.A.A Sidek, M.K. Halimah, K.A. Matori and W.M.D.W. Yusoff, (Co-Author), “Physical Properties of Borotellurite Glass Doped with Manganese”, Solid State Science and Technology, 19(2), 342-347, (2011).

194. W.N.A.W. Shaaidi, M. K. Mansor, K. P. Lim, K. A. Matori, E. Saion, S. A. Halim and S. K. Chen, (Co-Author), “Influence of Ca Doping on The Superconductivity of Y1-

xCaxBa2Cu3O7-d” Solid State Science and Technology, 19(2), 242-248, (2011). 195. M.K. Halimah, W.M. Daud, H.A.A. Sidek, S.M. Iskandar, A.W. Zaidan, Khamirul Amin

Matori, (Co-Author), “Thermal Properties of ternary tellurite Glass System” Solid State Science and Technology Letters, 19(1), 78-82, (2011).

196. M.M. Aiza, A.W. Zaidan, M.Y. Wan Mahmood, A.M. Khamirul, M. A. Rabiatul Adawiyah, (Co-Author), “Thermal Conductivity of Pt-SnO2 Gas Sensor”, Solid State Science and Technology Letters, 18(1&2), 21-28, (2011).

2010 197. K.A. Matori, M.H.M. Zaid, H.A.A. Sidek, M.K. Halimah, Z.A. Wahab and M.G.M. Sabri,

(Corresponding author), “Influence of ZnO on the ultrasonic velocity and elastic moduli of soda lime silicate glasses” International Journal of the Physical Sciences, 5(14), 2212-2216, (2010). Scopus Index Journal

198. W.A.W.A.K. Ghani, M.S.F. Abdullah, K. A. Matori, A.B. Alias and G. da Silva, (Co-Author), “Physical and Thermochemical Characterisation of Malaysian Biomass Ashess” The Journal of the Institution of Engineers, Malaysia, 71(3), 9-18, (2010). Scopus Index Journal

199. Z.A. Wahab, Z. Syaharudin, K.A. Matori, E.H. Norfarezah, M. Y. Thai, M.M.Z. Hilmi, M.S.M. Ghazali, M.N.M. Daud, (Co-Author), “Preparation and Characterization of Glass-Ceramic Synthesized from Soda Lime Silica Glass and Wastewater Sludge” Pertanika J. Sci. & Technol., 18(2), 223-229, (2010). Scopus Index Journal

200. T. Jahanbin, M. Hashim, K.A. Matori, S.B. Waje, (Co-Author), “Influence of sintering temperature on the structural, magnetic and dielectric properties of Ni0.8Zn0.2Fe2O4 synthesized by co-precipitation route”, Journal of Alloys and Compounds, 503(1), 111-117, (2010). Impact Factor of 3.014: Q1

201. T. Jahanbin, M. Hashim, K.A. Matori, (Co-Author), “Comparative studies on the structure and electromagnetic properties of Ni−Zn ferrites prepared via co-precipitation and conventional ceramic processing routes”, Journal of Magnetism and Magnetic Materials, 322(18), 2684-2689, (2010). Impact Factor of 2.357: Q2

202. Halimah Mohamed Kamari, Sidek Hj. Abd. Aziz, Wan Mohamad Daud Wan Yusoff, Zainal Abidin Sulaiman, Mansor Hashim, Khamirul Amin Matori, (Co-Author), “Physical Properties of Binary Tellurite Glass System” Solid State Science and Technology, 18(1), 364-370, (2010).

2009 203. K.A. Matori, M.M. Haslinawati, Z.A. Wahab, H.A.A. Sidek, T.K. Ban, W.A.W.A.K.

Ghani, (Corresponding author), “Producing Amorphous White Silica from Rice Husk” MASAUM Journal of Basic and Applied Sciences, 1(3), 512-515, (2009). Scopus Index Journal

204. M.M. Haslinawati, K.A. Matori, Z.A. Wahab, H.A.A. Sidek, A.T. Zainal, (Corresponding author), “Effect of Temperature on Ceramic from Rice Husk Ash” International Journal of Basic & Applied Sciences IJBAS, 9(9), 111-117, (2009). Scopus Index Journal

52

205. Ismayadi, M. Hashim, A.M. Khamirul, R. Alias, (Co-Author), “The Effect of Milling Time on Ni0.5Zn0.5Fe2O4 Compositional Evolution and Particle Size Distribution”, American Journal of Applied Sciences, 6(8), 1548-1552, (2009). Scopus Index Journal

206. Wan Azlina Wan Ab Karim Ghani, Mohd Syafik Firdaus Abdullah, Chung Jiang Loung, Chong Jean Ho, Kamirul Amin Matori, (Co-Author), “Characterization of Vitrified Malaysian Agrowaste Ashes as Potential Recycling Material”, International Journal of Engineering and Technology, 6(2), 66-72, 2009.

207. M.M. Haslinawati, K.A. Matori, Z.A. Wahab, T.K. Ban, H.A.A. Sidek, A.T. Zainal and A.N. Hara, (Corresponding author), “Thermal Properties of Ceramic from Rice Husk Ash and Er2O3”, Solid State Science and Technology Letters, 16(1&2), 160-167, (2009).

208. Norfaizah, H.A.A. Sidek, A.M. Khamirul, T.H. Anuar and S.A. Warid, (Co-Author), “Preparation and Properties of Nano Silicate-Based Glass-Ceramic” Solid State Science and Technology Letters, 16(1&2), 6-12, (2009).

209. E.H. Norfarezah, Z. Syaharudin, M.M. Aiza, M.Y. Thai, A.W. Zaidan, K.A. Matori, M.M. Maarof and M.M.Z. Hilmi, (Co-Author), “Thermal Diffusivity Measurement of Soda Lime Silica (SLS)-Coal Fly Ash (CFA) Ceramics”, Solid State Science and Technology Letters, 16(1&2), 44-51, (2009).

210. M.M.Z. Hilmi, A.W. Zaidan, K.A. Matori, A.B. Faridah, E.H. Norfarezah, Z. Syaharudin and M. Y. Thai, (Co-Author), “Correlation Between Structural and Thermal Diffusivity of Glass-Ceramics from a Mixture of Soda Lime Cullet Glass and Coal Bottom Ash” Solid State Science and Technology Letters, 16(1&2), 120-126, (2009).

211. D. Marlinda, H.A.A. Sidek, M.K. Halimah and A.M. Khamirul, (Co-Author), “The Effect of RO Oxides on Borosilicate Glass Prepared from Local Silica Sand”, Solid State Science and Technology Letters, 16(1&2), 81-88, (2009).

2008 212. W.A.W.A. Karim Ghani, M.S. Firdaus Abdullah, C.J. Loung, C.J. Ho, K.A. Matori, (Co-

Author), “Characterization of Vitrified Malaysian Agrowaste Ashes as Potential Recycling Material” International Journal of Engineering and Technology, 5(2), 111-117, (2008). Scopus Index Journal

213. H.A.A. Sidek, H.B. Senin, M.K. Halimah, W.M. Daud, A.M. Khamirul, (Co-Author), “Glass Formation and Elastic Behavior of Bismuth Borate Glass System”, American Institute of Physics, 1017, 321-325, (2008). Scopus Index Journal

214. H.A.A. Sidek, M.K. Halimah, W.M. Daud, A.M. Khamirul, Z.A. Talib, A.W. Zaidan, Z. Azmi, A. Zulkifly, S.A. Halim, (Co-Author), “Quantitative Analysis on the Elastic Behaviour of Borotellurite Glass” J. Wuhan University of Technology. Materials Science Edition, B12, 863-867, (2008). Scopus Index Journal

215. H.A.A. Sidek, K.A. Matori, S.P. Chow, A.S. Halim, M.K. Halimah, A.T. Zainal and C.H. Kim, (Co-Author), “Effect of Annealing on the Elastic Properties of Lead-Zinc Metaphosphate Glasses”, Journal of Solid State Science and Technology Letters, 12 (1&2), 133-140, (2005).

Proceeding(s)

1. Halimah M.K., Sidek H.A.A., Daud W.M., Hasnu Rizal and Khamirul A.M., “Ultrasonic Wave Velocity and Elastic Modulus of Tellurite Glass”, Proceeding of Conference of Solid State Science and Technology, Kota Kinabalu, National, (2004), 11(1), 149-155.

2. Wan Azlina Wan Ab Karim Ghani, MohdSyafik Firdaus Abdullah, Chung Jiang Loung, Chong Jean Ho, Khamirul Amin Matori, “Characterization of Vitrified Malaysian

53

Agrowaste Ashes as Potential Recycling Material”, Proceeding of Symposium of Malaysian Chemical Engineering (SOMCHE) 2008, Kuala Lumpur, National, (2008), 833-840.

3. Wan Azlina Ab. Karim Ghani, Mohd. Syafik Firdaus, Khamirul Amin Matori, “Stabilisation and Recycling of Agricultural Based Residues as Potential Glass Ceramic Based Application”, Proceeding of 6th International Materials Technology Conference and Exhibiton, Kuala Lumpur, International, (2008).

4. Wan Azlina Wan Ab Karim Ghani, MohdSyafik Firdaus Abdullah, Chung Jiang Loung, Chong Jean Ho, Khamirul Amin Matori, “Characterization of Vitrified Malaysian Agrowaste Ashes as Potential Recycling Material”, Proceeding of Symposium on Engineering and Technology (SET) 2008, Kuching National, (2008).

5. Sidek H.A.A., Halimah M.K., Ang Jing Hui and Khamirul A.M., “Quantitative Analysis of Elastic Moduli of Borate and Phosphate Glasses Containing Lead Oxide”, Proceeding of Fundamental Science Congress 2008 (FSC2008), Fakulti Sains, Universiti Putra Malaysia, (2008).

6. Ayuni, J.N.; Halimah, M.K.; Talib, Z.A.; Sidek, H.A.A.; Daud, W.M.; Zaidan, A.W.; Khamirul, A.M., “Optical Properties of Ternary TeO2-B2O3-ZnO Glass System” Conference on Advanced Materials and Nanotechnology (CAMAN 2009), Putra World Trade Center (PWTC), Kuala Lumpur, Malaysia, 3–5 November 2009.

7. H.A.A. Sidek, K.A. Matori, M.K. Halimah, B.Z. Azmi and S. Rosmawati, “Elastic Properties of (TeO2)90(AlF3)10-x(ZnO)x Zinc Oxyfluorotellurite Glasses”, Conference on Advanced Materials and Nanotechnology (CAMAN 2009), Putra World Trade Center (PWTC), Kuala Lumpur, Malaysia, 3–5 November 2009.

8. M.M.Z. Hilmi, A.W. Zaidan, M.A. Khamirul, Z. Syaharudin, M.Y. Thai, A.B. Faridah, “Production of Glass Ceramics Using Conventional Sintering Rout for a Mixture of Soda Lime Cullet Glass and Coal Bottom Ash Powdered Glass”, Proceeding of Fundamental Science Congress 2010, Universiti Putra Malaysia, (2009).

9. Ayuni, J.N.; Halimah, M.K.; Sidek, H.A.A.; Talib, Z.A.; Daud, W.M.; Zaidan, A.W.; Khamirul, A.M., “Thermal Studies of TeO2-B2O3-ZnO Glass System” Proceeding of Fundamental Science Congress 2009, Universiti Putra Malaysia, (2009).

10. Ayuni, J.N.; Halimah, M.K.; Sidek, H.A.A.; Talib, Z.A.; Daud, W.M.; Zaidan, A.W.; Khamirul, A.M., “UV Spectral for TeO2-B2O3-ZnO Glass System” Proceeding of Physics Alumni Seminar, Department of Physics, Faculty of Science, UPM, (2009).

11. Hafiz, M.Z.M., Khamirul, A.M., Zaidan, A.W. Azmi B.Z., Halimah, M.K., “Kinetics of Phase Formation, Crystallization and Elastic Properties of Willemite-Based Glass Ceramics” Proceeding of Physics Alumni Seminar, Department of Physics, Faculty of Science, UPM, (2009).

12. Noor Hara Azami, Khamirul Amin Matori, Mohd Sabri Mohd Ghazali, Azmi Zakaria, “The Study of Properties of Zinc Silicate with Rice Husks Ash Doped with Er3+ and Eu3+”, Proceeding of Fundamental Science Congress 2010, Universiti Putra Malaysia, (2010).

13. Mohd Hafiz MohdZaid, Khamirul Amin Matori, AzmiZakaria, Zainal Abidin Talib, Zaidan Abdul Wahab, Mohd Sabri Mohd Ghazali, “Optical Band Gap of System (ZnO)X(SLS)1-X by Using UV-Visible Spectrophometer”, Proceeding of Fundamental Science Congress 2010, Universiti Putra Malaysia, (2010).

14. HAA Sidek, MK Halimah, Ng Cheah Lin, A M Khamirul and WM Daud “Analysis of the Elastic Model Application for the Phosphate Glasses Containing Gadolinium and Terbium” Proceeding of Regional Annual Fundamental Science Symposium, Johor Baharu, Malaysia, (2010).

54

15. M. H. M. Zaid, K. A. Matori, L. C. Wah, H. A. A. Sidek, M. K. Halimah, Z. A. Wahab and Z. Azmi, “Ultrasonic measurement and amorphous phase formation of soda lime silicate glasses containing zinc oxide”, Proceeding of Fundamental Science Congress 2011 (FSC2011), Fakulti Sains, Universiti Putra Malaysia, (2011).

16. W. N. A. W. Shaaidi, K. P. Lim, K. A. Matori, E. Saion, S. A. Halim, and S. K. Chen, “Superconducting Properties of Y(Ba1-xCax)2Cu3O7-δ (0 ≤ x ≤ 0.05) System”, AIP Conf. Proc. 1328, 257-260 (2011), Malaysia Annual Physics Conference 2010.

17. W. N. A. W. Shaaidi, K. P. Lim, K. A. Matori, E. Saion, S. A. Halim, M. M. Awang Kechik and S. K. Chen, “A Study of Ca Doping in YBa2Cu3O7-δ Superconductor”, Proceeding of Fundamental Science Congress 2012 (FSC2012), Fakulti Sains, Universiti Putra Malaysia, (2012).

18. Halimah M.K, Sidek H.A.A., Wahab Z.A., Khamirul A.M., Azlan M.N., Iskandar S.M. and S.O. Baki, “Effect of Zinc Chlorite on Elastic Properties of (ZnCl2)X (TeO2)1-X Glass System”, Proceeding of Fundamental Science Congress 2014 (FSC2014), Fakulti Sains, Universiti Putra Malaysia, (2014).

19. N. Daud, R.S. Azis, M. Hashim, K.A. Matori, “Elemental Analysis and Magnetic Properties of Sr1-XNdXFe12O19 Derived by Steel Waste Product by Using Mechanical Alloying”, Proceeding of Fundamental Science Congress 2014 (FSC2014), Fakulti Sains, Universiti Putra Malaysia, (2014).

20. R.S. Azis, M. Hashim, I. Ismail, N. M. Saiden, K.A. Matori, L. Y. Hun, “Study the Iron Containing Steel Waste Making Product, a Mill Scales and its Potential Applications in Ferrites”, Nano SciTech & IC-NET 2014, Universiti Teknology Mara (UiTM), Shah Alam, Selangor, (2014).

Seminar Papers Presented (orally)

1. Sidek H.A.A., Khamirul A.M., Chow S.P., A. Halim S., Halimah A.K. and Kim C.H., “The Effect of Annealing on the Elastic Properties of Lead-Zinc Metaphosphate Glasses”, PERFIK2002, Universiti Malaya, Kuala Lumpur, 20-21 December 2002.

2. K.A. Matori, P.F. James, W.E. Lee, “Glass and Glass Ceramic Obtained from Vitreous Waste” 7th. Int. Symp. Cryst. Glass & Liquid Waste, Society of Glass Technology, University of Sheffield, UK, 8-10 July 2003.

3. Sidek H.A.A., Talib Z.A., Halimah M.K., Khamirul A.M., Halim S.A. and Shiong Y.C., “Elastic Internal Energies of the Sodium Fluoroborate Glass System”, XXI Regional Conf. on Solid State Science and Technology, Hyatt Kinabalu Regency Hotel, Sabah, 12-13 October 2004.

4. Halimah M.K., Sidek H.A.A., Daud W.M., Chow S.P., Jumiah H., Hasnu R. And Khamirul A.M., “Thermal Expansion of Tellurite Borate Glass System”, XXI Regional Conference on Solid State Science and Technology, Hyatt Kinabalu Regency Hotel, Sabah, 12-13 October 2004.

5. K.A. Matori, P.F. James, W.E. Lee, “Crystallisation of Waste Glasses to Wollastonite-based Architectural Glass Ceramics”, IX Conference and Exhibition of the European Ceramic Society, The European Ceramic Society, Portoroz, Slovenia, 19-23 Jun 2005.

6. Sidek H.A.A, H. B. Senin, Halimah M. K., W.M. Daud, K. A. Matori, Z. A. Wahab, Z. A. Talib, Z. A. Sulaiman, A. H. Shaari “Elastic Behavior of Bismuth Borate and Bismuth Phosphate Glass System” PERFIK 2007, The Institut Fizik Malaysia (IFM), Kuala Terenganu, Malaysia, 26-28 December 2007

7. Sidek H.A.A., Halimah M.K., Daud W.M., Zainal A.T., Khamirul A.M., Wahab Z.A., Zainal A.S., Azmi Z., Zulkifly A., Halim A.S., “Elastic Behaviour of Borotellirite Glass”, 7th

55

Pacific Rim Conference on Ceramic and Glass Technology, Shanghai International Convention Center, Shanghai, China, 11-14 November 2007.

8. Matori K.A., Sidek H.A.A., Zainal A.T., Wahab Z.A., Halim A.S. and Halimah M.K., “Effect of ZnO and TiO2Nucleant on Crystallisation Behaviour of Glass and Glass Ceramics from Wollastonite-based Gasses” Regional Conference on Solid State Science & Technology (RCSST 2008), Port Dickson, Negeri Sembilan, Malaysia, 30 Nov.-2 Dec 2008.

9. Hara A.N., Matori K.A., Ban T.K., Sidek H.A.A, Halimah M.K., Zainal A.T., Wahab Z.A., Ghani W.A.W.A.K., Haslinawati M.M., “Effect of ZnO on Crystalline Phase in SiO2 Obtained From Rice Husk Ash” Regional Conference on Solid State Science & Technology (RCSST 2008), Port Dickson, Negeri Sembilan, Malaysia, 30Nov.-2 Dec 2008.

10. Haslinawati M.M., Hara A.N., Matori K.A., Ban T.K., Sidek H.A.A., Halimah M.K., Zainal A.T., Wahab Z.A., Ghani W.A.W.A.K., “Thermal Properties of Ceramic From Rice Husk Ash And Rare-Earth” Regional Conference on Solid State Science & Technology (RCSST 2008), Port Dickson, Negeri Sembilan, Malaysia, 30Nov.-2 Dec 2008.

11. Tania Jahanbin, Mansor Hashim, Khamirul Amin Matori, “Structural and Magnetic Characterization of Nanocrystalline Ni0.8Zn0.2Fe2O4 Synthesized via Co-Precipitation Route” Regional Conference on Solid State Science & Technology (RCSST 2008), Port Dickson, Negeri Sembilan, Malaysia, 30Nov.-2 Dec 2008.

12. Marlinda D., Sidek H.A.A., Halimah M.K., Khamirul A.M., “Effect of Ca, Mg, Ba, Zn Oxides on Borosilicate Glass Prepared from Local Silica Sand” Regional Conference on Solid State Science & Technology (RCSST 2008), Port Dickson, Negeri Sembilan, Malaysia, 30 Nov.-2 Dec 2008.

13. Norfarezah E.H., Aiza M.M., Syaharudin Z., Hilmi M.M.Z., Thai M.Y., Zaidan A.W., Matori K.A., Maarof M.M., “Thermal Diffusivity Measurement of Soda Lime Silica (SLS)-Coal Fly Ash (CFA) Ceramics” Regional Conference on Solid State Science & Technology (RCSST 2008), Port Dickson, Negeri Sembilan, Malaysia, 30Nov.-2 Dec 2008.

14. Sidek H.A.A., Rosmawati S., Zainal A.T., Zobir H.M., Halimah M.K., Daud W.M., Matori K.A., Halim S.A., “Optical and Physical Properties of Zinc Tellurite Glasses” Regional Conference on Solid State Science & Technology (RCSST 2008), Port Dickson, Negeri Sembilan, Malaysia, 30Nov.-2 Dec 2008.

15. Norfaizah Ismail, SidekHjAb Aziz, Khamirul Amin Matori, Hairul Anuar Tajuddin, “Sol-Gel Preparation Technique and Physical Characterization of Silica Based Glass Doped with Bismuth and Erbium” Regional Conference on Solid State Science & Technology (RCSST 2008), Port Dickson, Negeri Sembilan, Malaysia, 30 Nov.-2 Dec 2008.

16. Mohd Syafik Firdaus, Wan Azlina and Khamirul Amin Matori, “Vitrification of Rice Husk Ashes to Glass-Ceramic for Recycling”, 6th International Materials Technology Conference and Exhibition (IMTCE 2008), Institute of Materials Malaysia (IMM), Parkroyal Hotel, Kuala Lumpur, 24-27 August 2008.

17. Wan Azlina Wan Abd Karim Ghani, MohdSyafik Firdaus Hasbullah and Khamirul Amin Matori, “Stabilisation and Recycling of Agricultural Based Residues as Potential Glass Ceramic Based Application” 6th International Materials Technology Conference and Exhibition (IMTCE 2008), Institute of Materials Malaysia (IMM), Parkroyal Hotel, Kuala Lumpur, 24-27 August 2008.

18. Syaharudin Z., Zaidan A.W., Norfarezah E.H., Thai M.Y., Matori K.A., Hilmi M.M.Z., “Utilization of SLS Glasses and wastewater Sludge in The Glass-Ceramic Production”, AREL Seminar 2008, ITMA, UPM.

19. Ayuni, J.N.; Halimah, M.K.; Talib, Z.A.; Sidek, H.A.A.; Daud, W.M.; Zaidan, A.W.; Khamirul, A.M., “Optical Properties of Ternary TeO2-B2O3-ZnO Glass System”

56

Conference on Advanced Materials and Nanotechnology (CAMAN 2009), Putra World Trade Center (PWTC), Kuala Lumpur, Malaysia, 3–5 November 2009.

20. H.A.A. Sidek, K.A. Matori, M.K. Halimah, B.Z. Azmi and S. Rosmawati, “Elastic Properties of (TeO2)90(AlF3)10-x(ZnO)x Zinc Oxyfluorotellurite Glasses”, Conference on Advanced Materials and Nanotechnology (CAMAN 2009), Putra World Trade Center (PWTC), Kuala Lumpur, Malaysia, 3–5 November 2009.

21. Wan Azlina Wan Abd Karim Ghani, MohdSyafik Firdaus Hasbullah and Khamirul Amin Matori, “Vitrification of Malaysian Rice Husk Ashes as Recycle Potential in Building Materials”, CHEMECA 2009, Institution of Chemical Engineers in Australia (IChemE) and Engineers Australia (EA), Burswood Entertainment Complex, Perth, Australia, 27–30 September 2009

22. M.K. Halimah, W.M Daud, H.A.A. Sidek, S.M. Iskandar, A.W. Zaidan, Khamirul, A.M., “Thermal Properties of Ternary Tellurite Glass System”, 25th Regional Conference on Solid State Science & Technology 2009 (RCSSST2009), Bayview Beach Resort, Penang, Malaysia, 21-23 December 2009.

23. D. Marlinda, H.A.A. Sidek, A.M. Khamirul, M.K. Halimah, “The Effect of Boric Oxide on Borosilicate Glass Prepared from Local Silica Sand”, 25th Regional Conference on Solid State Science & Technology 2009 (RCSSST22009), Bayview Beach Resort, Penang, Malaysia, 21-23 December 2009.

24. Aiza M.M., Zaidan A.W., Wan Mahmood M.Y., Khamirul A.M.,“Thermal Conductivity Measurement of SnO2-Based Gas Sensor Materials at Room Temperature” Fundamental Science Congress 2010, Kompleks Mahasiswa, Universiti Putra Malaysia, 18-19 May 2010.

25. Rabiatul Adawiyah Md Akhir, Zaidan Abdul Wahab, Khamirul Amin Matori,“Thermal and Structural Studies of ZnO-CuO System” Fundamental Science Congress 2010, Kompleks Mahasiswa, Universiti Putra Malaysia, 18-19 May 2010.

26. Rodziah Nazlan, Mansor Hashim, Idza Riati Ibrahim, Khamirul Amin Matori, “Effect of Morphological Properties on Complex Permeability in Polycrystalline Yttrium Iron Garnet” Fundamental Science Congress 2010, Kompleks Mahasiswa, Universiti Putra Malaysia, 18-19 May 2010.

27. Wan Nurul Ain Wan Shaaidi, Nurfarah Idayu Ahmad, Mohd Kamarulzaman Mansor, Lim Kean Pah, Khamirul Amin Matori, Abdul Halim Shaari, Chen Soo Kien, “The Effect of Sintering Temperature on the Phase Formation of YBCO”, Fundamental Science Congress 2010, Kompleks Mahasiswa, Universiti Putra Malaysia, 18-19 May 2010.

28. Sidek Ab Aziz, Halimah M Kamari, Ang Jing Hui, Khamirul A Matori,“Quantitatively Analysis of Elastic Moduli of Borate and Phosphate Glasses Containing Lead Oxide”, Fundamental Science Congress 2010, Kompleks Mahasiswa, Universiti Putra Malaysia, 18-19 May 2010.

29. Mohd Hafiz Mohd Zaid, Khamirul Amin Matori, Azmi Zakaria, Zainal Abidin Talib, Zaidan Abdul Wahab, MohdSabriMohdGhazali, “Optical Band Gap of System (ZnO)X(SLS)1-X by Using UV-Visible Spectrophometer”, Fundamental Science Congress 2010, Kompleks Mahasiswa, Universiti Putra Malaysia, 18-19 May 2010.

30. Noor Hara Azami, Khamirul Amin Matori, Mohd Sabri Mohd Ghazali, Azmi Zakaria, “The Study of Properties of Zinc Silicate with Rice Husks Ash Doped with Er3+ and Eu3+”, Fundamental Science Congress 2010, Kompleks Mahasiswa, Universiti Putra Malaysia, 18-19 May 2010.

31. Aiza M.M., Zaidan A.W., Wan Mahmood M.Y., Khamirul A.M. and Radiatul Adawiyah M.A., “Thermal conductivity measurement of SnO2-based gas sensor maerials at room

57

temperature”, ICSSST 2010, International, Hilton Hotel, Sarawak, Malaysia, 1-3 December 2010.

32. Shaaidi W.N.A.W., Lim K.P., Matori K.A., Saion E., Halim S.A., Chen S.K. “Superconductivity in the System Y(Ba1-xCax)2Cu3O7-d” National Conference on Physics 2010, National, Swiss Garden Golf Resort & Spa Damai Laut, Perak, Malaysia, 27– 30 October 2010.

33. N.H. Azami, K.A Matori, M.G.M. Sabri and B.Z. Azmi, “Band Gap Study of Zinc Silicate Doped with Er3+/Eu3+ with Rice Husks Based” Regional Annual Fundamental Science Symposium (RAFSS2010), National, Grand Seasons Hotel, Kuala Lumpur, 8-9 June 2010.

34. H.A.A. Sidek, M.K. Halimah, N.C. Lin, A.M. Khamirul and W.M. Daud “Analysis of the Elastic Model Application for the Phosphate Glasses Containing Gadolinium and Terbium” Regional Annual Fundamental Science Symposium (RAFSS2010), National, Grand Seasons Hotel, Kuala Lumpur, 8-9 June 2010.

35. H.A.A. Sidek, S. Rosmawati, M.K. Halimah, K.A. Matori and W.M. Daud, “Ultrasonic Velocity and Elastic Behaviour of TeO2-AlF3-ZnO Glasses” The 3rd International Conference on Solid State Science and Technology (ICSSST2010), International, Kuching, Sarawak, 1-3 December 2010

36. Loy Chee Wah, Khamirul Amin Matori, Mansor Hashim, Abdul Hadi Ramzani, Zainal Abidin Talib, Sidek Haji Abdul Aziz, Halimah Mohamed Kamari, Mohd Hafiz MohdZaid, “Phase Transformation of α-Alumina from Alumina Waste”, Fundamental Science Congress 2011, Universiti Putra Malaysia, 5-6 Julai 2011.

37. M.K. Halimah, W.M. Daud, H.A.A. Sidek, Khamirul Amin Matori, Zaidan A.W., Hamirah Mohamed, “Thermal Diffusivity of Copper Borate Glasses”, 26thRegional Conference on Solid State Science & Technology, The Royale Bintang, Seremban, Negeri Sembilan, Malaysia, 22-24 Nov. 2011.

38. Sidek Ab Aziz, Zaidan Abdul Wahab, Rosmawati Shaharuddin, Khamirul Amin Matori, Halimah M Kamari, “Thermal Characteristics of ZnO-TeO2 Glass”, 4th International Conference on Solid State Science and Technology (ICSSST 2012), Melaka, Malaysia, 18-20 December 2012.

39. Wan Nurul Ain Wan Shaaidi, Lim Kean Pah, Khamirul Amin Matori, Elias Saion, Abdul Halim Shaari, Mohd. Mustafa Awang Kechik, Chen Soo Kien, “Ca Substitution in YBa2Cu307-d Superconductor” 4th International Conference on Solid State Science and Technology (ICSSST 2012), Melaka, Malaysia, 18-20 December 2012.

40. Khamirul Amin Matori, “Producing Mullite-based Thermal Insulator from Rice Husk Ash and Al2O3”, Seminar Jabatan Fizik, 18 April 2012.

41. Sidek Ab Aziz, Zaidan Abdul Wahab, Rosmawati Shaharuddin, Khamirul Amin Matori, Halimah M Kamari & Norhazlin Zainuddin, “Quantitative Analysis on the Elastic Constants of ZnO-TeO2 Glass System”, 27th Regional Conference on Solid State Science & Technology (RCSSST27), Kota Kinabalu, Sabah, Malaysia, 20-22 December 2013.

42. Khamirul Amin Matori, Gholamreza Vahedi Sarrigani, Nurfatin Syamimi Mohd Razali, Sidek Hj. Abdul Aziz, Halimah Mohamed Kamari & Mohd Hafiz Mohd Zaid, “The Influence of Sintering Temperature on the Structure of Willemite-Based Ceramics Doped with Rare Earth”, 27th Regional Conference on Solid State Science & Technology (RCSSST27), Kota Kinabalu, Sabah, Malaysia, 20-22 December 2013.

43. Zaidan Abdul Wahab, M Zul Hilmi Mayzan & Khamirul Amin Matori, “Effect of Crystallization on The Thermal Diffusivity of Vitrified Soda Lime Cullet Glass/Coal Bottom Ash Glass Ceramics Mixture”, 27th Regional Conference on Solid State Science & Technology (RCSSST27), Kota Kinabalu, Sabah, Malaysia, 20-22 December 2013.

58

44. Khamirul Amin Matori, “Design and Synthesis of Nanomaterials for Nanomedicine Applications: Drug/DNA Deliveries and Nanosensor”, 9th Nanoscience and Nanotechnology Conference (NANOTR-9), Ataturk Universitesi, Erzurum, TURKEY, 24-28 June 2013.

45. Firouz Fadaeifard, Faizal Mustapha, Khamirul Amin Matori, Amir Abbas Nourbaksh, Meysam Toozandehjani “Rail Inspection Technique Employing Advanced Non-destructive Testing and Structural Health Monitoring (SHM) approaches-a-review”, Malaysia International NDT Conference and Exhibition 2013 (MINDTCE 2013), The Sunway Putra Hotel, Kuala Lumpur, 16-18 June 2013.

46. Khamirul Amin Matori, “Macro and Micro Structural Study of AA6061-T6 Aluminum Alloys Welded Via Friction Stir Welding Methods in Lap Joint”, 28th Regional Conference on Solid State Science & Technology (RCSSST28), Copthorne, Cameron Highlands, Pahang, Malaysia, 25-27 November 2014.

47. Halimah, M.K., Ho Xing Hui, Sidek H.A.A., Khamirul, A.M., Iskandar, S.M., Baki, S. O., “Effect of Lead on Physical and Optical Properties of (PbO)x(B2O3)1-x Glass System”, 28th Regional Conference on Solid State Science & Technology (RCSSST28), Copthorne, Cameron Highlands, Pahang, Malaysia, 25-27 November 2014.

48. Farhad Gharavi, Khamirul Amin Matori, “Microstructure and Corrosion Properties of Friction Stir Welded Aluminum Alloy 5086”, 28th Regional Conference on Solid State Science & Technology (RCSSST28), Copthorne, Cameron Highlands, Pahang, Malaysia, 25-27 November 2014.

49. Nur Fadilah Baharuddin Pallan, Khamirul Amin Matori, “Study on preparation and effects of heat treatments on the structural of 45S5 bioglass from waste materials”, 28th Regional Conference on Solid State Science & Technology (RCSSST28), Copthorne, Cameron Highlands, Pahang, Malaysia, 25-27 November 2014.

50. Khamirul Amin Matori “A Facile Synthesis and Characterization of Amorphous Silica (SiO2) by Thermal Treatment Route”, International Conferences on Metallurgy Technology and Materials (ICMTM), London, United Kingdom, 21st November 2015.

51. Nur Farhana Samsudin, Khamirul Amin Matori, Josephine Ying Chi Liew, Yap Wing Fen and Norhafizah M. Rasdi, “Fundamental Studies of Undoped and Mn-doped Zn2SiO4 Based Glass and Glass-ceramics”, 5th International Conference on Solid State Science and Technology 2015 (ICSSST2015), 13–15 December 2015, Bayview Hotel, Langkawi, Kedah, MALAYSIA.

52. Khamirul Amin Matori, “Synthesis and Characterization of Rare Earth and Transition Metal Ions Doped Willemite-Based Glass-ceramics”, 5th International Conference on Solid State Science and Technology 2015 (ICSSST2015), 13–15 December 2015, Bayview Hotel, Langkawi, Kedah, MALAYSIA.

53. Zamratul Maisarah Mohd Ismail, Zaidan Abdul Wahab and Khamirul Amin Matori, “Formation and Structural Characterization of Neodymium Doped Willemite Glass Ceramic”, 5th International Conference on Solid State Science and Technology 2015 (ICSSST2015), 13–15 December 2015, Bayview Hotel, Langkawi, Kedah, MALAYSIA.

54. Z. Liyana, K.A. Matori and H.A.A. Sidek, “Heat Treatment Effects on Ultrasonic Characterization and Residual Stresses using Longitudinal Critically Refracted (LCR) Wave in FSW and TIG Welded Aluminum AA6061”, 5th International Conference on Solid State Science and Technology 2015 (ICSSST2015), 13–15 December 2015, Bayview Hotel, Langkawi, Kedah, MALAYSIA.

55. Siti Syuhaida Abdul Rashid, Sidek Abd Aziz and Khamirul Amin Matori, “Physical Properties and Optical Band Gap of Er2O3-ZnO-SLS Glass System”, 5th International

59

Conference on Solid State Science and Technology 2015 (ICSSST2015), 13–15 December 2015, Bayview Hotel, Langkawi, Kedah, MALAYSIA.

56. Nuraidayani Effendy, Zaidan Abdul Wahab, Halimah Mohamed Kamari, Khamirul Amin Matori and Mohd Hafiz Mohd Zaid, “Crystallization of Willemite Based Glass Ceramic Doped Erbium Oxide”, 5th International Conference on Solid State Science and Technology 2015 (ICSSST2015), 13–15 December 2015, Bayview Hotel, Langkawi, Kedah, MALAYSIA.

57. Zarifah Hj Nadakkavil Alassan, K.A. Matori, H.A.A. Sidek, Z.A. Wahab, M.A. Mohd Salleh, N. Zainuddin, P.B.N. Fadhilah, M.Z.A. Khiri and A.N. Fauzana, “Sintering Effect on The Physical and Structural Properties of Bioglass Based Hydroxyapatite Composite”, 5th International Conference on Solid State Science and Technology 2015 (ICSSST2015), 13–15 December 2015, Bayview Hotel, Langkawi, Kedah, MALAYSIA.

58. Mohammad Zulhasif Ahmad Khiri, K.A Matori, N.A Zarifah, B.N Fadila, N. Zainuddin and C.A.C Abdullah, “Synthesis and Characterization of Hydroxyapatite Nanoparticles from Clam Shell via Wet Chemical Precipitate Method”, 5th International Conference on Solid State Science and Technology 2015 (ICSSST2015), 13–15 December 2015, Bayview Hotel, Langkawi, Kedah, MALAYSIA.

59. Rabiatul Adawiyah Abdul Wahab, Nurzilla Mohamed, Khamirul Amin Matori, Zaidan Abdul Wahab and Wan Azlina Wan Abdul Karim, “Effect of Sintering Temperature on Physical Characteristics and Phase Transformation of Mullite-Based Ceramics from Rice Husk AshAlumina Mixtures”, 5th International Conference on Solid State Science and Technology 2015 (ICSSST2015), 13–15 December 2015, Bayview Hotel, Langkawi, Kedah, MALAYSIA.

60. Mohd Hafiz Mohd Zaid, Khamirul Amin Matori, Sidek Hj. Abdul Aziz, Wan Mahmood Mat Yunus and Halimah Mohamed Kamari, “Preparation and Characterization of Willemite based Glass-Ceramic from ZnO-SLS Waste Glass by Conventional Solid State Method as Prospective Phosphor Materials”, 5th International Conference on Solid State Science and Technology 2015 (ICSSST2015), 13–15 December 2015, Bayview Hotel, Langkawi, Kedah, MALAYSIA.

61. Idza Riati Ibrahim, Mansor Hashim, Zaidan Abdul Wahab, Khamirul Amin Matori, Rodziah Nazlan, Ismayadi Ismail, Nor Hapishah Abdullah, Wan Norailiana Wan Ab. Rahman and Fadzidah Mohd Idris, “Microstructural Dependence of Thermal Diffusivity in Lanthanum Doped Strontium Titanate Upon Evolving Through Nanometric-to-Micronic Microstructure”, 5th International Conference on Solid State Science and Technology 2015 (ICSSST2015), 13–15 December 2015, Bayview Hotel, Langkawi, Kedah, MALAYSIA.

62. Norfauzana Adnin, K.A. Matori, M. Hashim, N. Zainuddin, B.N. Fadilah and N.A. Zarifah, “Microstructural Characterization of Bioglass Reinforced by Hydroxyapatite Composites”, 5th International Conference on Solid State Science and Technology 2015 (ICSSST2015), 13–15 December 2015, Bayview Hotel, Langkawi, Kedah, MALAYSIA.

63. Nur Fadilah Baharuddin Pallan, K.A. Matori, M. Hashim, A.N. Fauzana, M.Z.A. Khiri, M.I. Fadzidah, I.R. Idza, Z. Norhazlin, Z.A. Wahab, H.A.A. Sidek, N.A. Zarifah, M.Z.M. Hafiz, M. Nurzilla and M.I.M. Zamratul, “Effect of Heat Treatment on the Structural Properties of Glass-Ceramic from Waste Materials”, 5th International Conference on Solid State Science and Technology 2015 (ICSSST2015), 13–15 December 2015, Bayview Hotel, Langkawi, Kedah, MALAYSIA.

64. Alibe Ibrahim Mustapha and Khamirul Amin Matori, “Synthesis and Characterization of Amorphous Silica Nanoparticles (n-SiO2) by Simple Thermal Treatment Route”, 5th

60

International Conference on Solid State Science and Technology 2015 (ICSSST2015), 13–15 December 2015, Bayview Hotel, Langkawi, Kedah, MALAYSIA.

65. Engku Abd Ghapur Che Engku Ali, K.A. Matori and H.A.A. Sidek, “Synthesis and Characterization of Zinc Silicate Produced by Wet Chemical Method”, 5th International Conference on Solid State Science and Technology 2015 (ICSSST2015), 13–15 December 2015, Bayview Hotel, Langkawi, Kedah, MALAYSIA.

66. Nur Alia Sheh Omar, Yap Wing Fen, Khamirul Amin Matori and Norhafizah Mohd Rasdi, “Structural and Optical Properties of Eu3+-Activated Amorphous Zinc Silicate Phosphor”, 5th International Conference on Solid State Science and Technology 2015 (ICSSST2015), 13–15 December 2015, Bayview Hotel, Langkawi, Kedah, MALAYSIA.

67. Anwar Ali Baqer, Mansor Hashim, Naif Mohammed Al-Hada, Abdul Halim Shaari, Elias Saion, Khamirul Amin Matori and Josephine Liew Ying Chyi, “Structural and Optical Properties of Structural and Optical Properties of Nanocrystalline CeO Fabricated by Modified Thermal Treatment Technique”, 5th International Conference on Solid State Science and Technology 2015 (ICSSST2015), 13–15 December 2015, Bayview Hotel, Langkawi, Kedah, MALAYSIA.

68. Nurzilla Bt Mohamed, Z.A. Wahab and K.A. Matori, “Preparation and Characterization of Soda Lime Silica (SLS) Zinc Oxide (ZnO) based Glass Ceramic Doped with Praseodymium (Pr)”, 5th International Conference on Solid State Science and Technology 2015 (ICSSST2015), 13–15 December 2015, Bayview Hotel, Langkawi, Kedah, MALAYSIA.

69. Rosnita A. Talib, Amir Alizadehmonir, Siti Hajar Othman and Khamirul Amin Matori, “Effects Of Heat Treatment And Filler Types On Heat Deflection Temperature And Crystallisation Of Poly(Lactic Acid) Composites”, 5th International Conference on Solid State Science and Technology 2015 (ICSSST2015), 13–15 December 2015, Bayview Hotel, Langkawi, Kedah, MALAYSIA.

70. Noruzaman Daud, R.S. Azis, M. Hashim, K.A. Matori and N.M.M. Shahrani, “Study of Transition Metals Ion Substitution on the Structure and Magnetic Properties of SrTM0.5Fe11.5O19 (TM: Ti, Co, Ni, Cu, and Zn) Derived from Mill Scales Product via Mechanical Alloying”, 5th International Conference on Solid State Science and Technology 2015 (ICSSST2015), 13–15 December 2015, Bayview Hotel, Langkawi, Kedah, MALAYSIA.

71. M.H.M. Zaid, K.A. Matori, H.A.A. Sidek, M.K. Halimah, Z.A. Wahab, Y.W. Fen and I.M. Alibe “Fabrication and Characterization of Low Cost Willemite-based Glass-Ceramic Glass System”, International Conference on Science and Technology for Sustainable Development 2016 (ICSTSD 2016), 24-26 May 2016, Hotel Istana, Kuala Lumpur, Malaysia.

72. H.A.A. Sidek, S.A. Halim, M.K. Halimah, K.A. Matori “Synthesis and Elastic Behavior of ZnO-PbO-P2O5 Glass System”, International Conference on Science and Technology for Sustainable Development 2016 (ICSTSD 2016), 24-26 May 2016, Hotel Istana, Kuala Lumpur, Malaysia.

73. R Nawang, K.A. Matori, C.A. Che Abdullah “Effect of Montmorillonite Clay Addition on Mechanical Properties of Hydroxyapatite”, International Conference on Science and Technology for Sustainable Development 2016 (ICSTSD 2016), 24-26 May 2016, Hotel Istana, Kuala Lumpur, Malaysia.

74. N.A. Zarifah, K.A. Matori, H.A.A. Sidek, Z.A. Wahab, M.M.M. Salleh, N. Zainuddin, P.P.B.N. Fadhilah, M.Z.A. Khiri, M.R. Norhafizah “Physical and Structural Studies of Hydroxyapatite Incorporating with 45S5 Bioglass”, International Conference on Science and Technology for Sustainable Development 2016 (ICSTSD 2016), 24-26 May 2016, Hotel Istana, Kuala Lumpur, Malaysia.

61

75. M. Toozandehjani, K.A. Matori, F Ostovan, H.A.A. Sidek, M.S. Mamat, O.A. Kajeh “Morphological and Microstructural Characterization of Mechanically Alloyed Multi-Walled Carbon Nanotubes Reinforced Aluminum Matrix Nanocomposite Powders”, International Conference on Science and Technology for Sustainable Development 2016 (ICSTSD 2016), 24-26 May 2016, Hotel Istana, Kuala Lumpur, Malaysia.

76. M.K. Halimah, M.N. Azlan, H.A.A. Sidek, S.A. Halim, K.A. Matori “Phtoluminescence Properties of Nedymium Doped Tellurite Glass”, International Conference on Science and Technology for Sustainable Development 2016 (ICSTSD 2016), 24-26 May 2016, Hotel Istana, Kuala Lumpur, Malaysia.

77. Khamirul Amin Matori, Farhad Ostovan, Meysam Toozandehjani, Farhad Gharavi, Firouz Fadaeifard, “Reinforcement of Aluminum Matrix by CNTs and Nano Alumina Using Powder Metallurgy Method”, 1st International Symposium on Nanotechnology 2016, Islamic Azad University of Najafabad, Isfahan Iran, May 24-26, 2016

78. Khamirul Amin Matori, “Development and synthesis of willemite based glassceramics derived from waste glass as potential phosphor materials in optoelectronic industry”, 29th Regional Conference on Solid State Science & Technology (RCSSST29), KSL Hotel & Resort, Johor Bahru, Malaysia, 15-17 November 2016.

79. Idza Riati Ibrahim, Khamirul Amin Matori, “A Comparative Study of Different Heat Treatments on Thermophysical Properties in Nanometric-To-Micronic Microstructure of Strontium Titanate”, 29th Regional Conference on Solid State Science & Technology (RCSSST29), KSL Hotel & Resort, Johor Bahru, Malaysia, 15-17 November 2016.

80. Ibrahim Mustapha Alibe, Khamirul Amin Matori, “The Influence of Calcination Temperature on Structural and Optical properties of ZnO-SiO2 Nanocomposite by Simple Thermal Treatment Route”, 29th Regional Conference on Solid State Science & Technology (RCSSST29), KSL Hotel & Resort, Johor Bahru, Malaysia, 15-17 November 2016.

81. Anwar Ali Baqer, Khamirul Amin Matori, “Utilizing Heat Treatment Methods to Achieve Controlled Synthesis of CeO2 Semiconductor Nanoparticles”, 29th Regional Conference on Solid State Science & Technology (RCSSST29), KSL Hotel & Resort, Johor Bahru, Malaysia, 15-17 November 2016.

82. Sidek Ab. Aziz, Khamirul Amin Matori, “Elastic Constants of New Series of PbO-ZnO-P2O5 Glass Systems”, 29th Regional Conference on Solid State Science & Technology (RCSSST29), KSL Hotel & Resort, Johor Bahru, Malaysia, 15-17 November 2016.

83. Tasiu Zangina, Khamirul Amin Matori, “A.C. Conductivity and Dielectric Properties of Li1.5Ti1.5Al0.5(PO4)3 NASICON-type Material”, 29th Regional Conference on Solid State Science & Technology (RCSSST29), KSL Hotel & Resort, Johor Bahru, Malaysia, 15-17 November 2016.

84. Khamirul Amin Matori, “Synthesis and Characterization of Carbon Nanotubes and Nano Alumina Reinforced Aluminum Matrix Nanocomposites”, 6th lnternational Conference on Solid State Science and Technology (lCSSST2017), Olive Tree Hotel, Penang, Malaysia, 13-16 November 2017.

85. Khamirul Amin Matori, “Anti-radar and anti-infrared coating materials: an overview”, Symposium on Vehicle Structure, Materials and Systems 2017, The Everly, Putrajaya, 7-8 February 2017.

86. Khamirul Amin Matori, “Identification of Potent Electromagnetic Wave Absorption Mechanism for Anti-Radar and Anti-Infrared Coating Materials”, Symposium on Vehicle Structure, Materials and Systems 2018, Palm Garden Hotel, Putrajaya, Malaysia, 15th November 2018.

62

87. Khamirul Amin Matori, “Current Trend and Status of Bioceramics for Dental Applications in UPM, Malaysia”, Symposium on Applied Sciences and Engineering (SASE2018), Atatürk University, Erzurum, Turkey, 26-28 November 2018.

88. Khamirul Amin Matori, “Physical, Structural and Mechanical Properties of Glass Ionomer Cement Using Different Glass Composition from Vitreous Waste”, 30th Regional Conference on Solid State Science & Technology (RCSSST30), Swiss Garden Hotel Melaka, Melaka, Malaysia, 6-8 November 2018.

Other Presentation (Poster/Product/Exhibition/Showcase)

1. Khamirul Amin Matori, Sidek Hj. Ab. Aziz, Chow Sai Pew, Abdul Halim Shaari and Halimah A. Kamari, “Kesan Penambahan Plumbum Ke atas Ciri Kekenyalan Kaca Plumbum Fosfat”, PERFIK2002, National, Universiti Malaya, Kuala Lumpur, 20-21 December 2002.

2. K.A. Matori, P.F. James, W.E. Lee,“Immobilising Waste in Glass and Glass Ceramics” UK Ceramics and Glasses Forum, Manchester Materials Science Centre, University of Manchester, 13 May 2004.

3. M. Nurzilla, K.A. Matori, A.A.W. Rabiatul, S.A. Halim, R. Ibrahim “Preparation of Mullite Based ceramic from rice husk ash and alumina” 4th International Conference on Solid State Science and Technology (ICSSST 2012), Melaka, Malaysia, 18-20 December 2012.

Other Equivalent Outcomes (Chapter in-book/Monograph/Module/Popular Writing & Article)

1. Sidek Hj. Ab. Aziz and Khamirul Amin Matori, “Sains dan Teknologi Ultrasonik”, Monograf, Jabatan Fizik dan The MASS Malaysia, 1994: UPM Lib Call No: QC244 S132.

2. Khamirul Amin Matori, “Fizik Pengenalan 1” Buku (Matrikulasi), Matriculation Centre, UPM, 1998.

3. SidekHj. Ab. Aziz and Khamirul Amin Matori, “Asas Sains dan Teknologi Kaca dan Ultrasonik”, Monograf, Jabatan Fizik dan The MASS Malaysia, 2001.

4. Sidek, H. A. A.; Senin, H. B.; Halimah, M. K.; Daud, W. M.; Khamirul, A. M.; Halim, A. S. “Glass Formation and Elastic Behavior of Bismuth Borate Glass System”, AIP Conference Proceedings, 1017, 321-325 (2008) in CURRENT ISSUES OF PHYSICS IN MALAYSIA: National Physics Conference 2007 - PERFIK 2007, by H. B. Senin, Giuseppe Carini, J. B. Abdullah, D.A. Bradley, American Institute of Physics.

5. SidekHj. Ab. Aziz, Khamirul Amin Matori, Zaidan Abdul Wahab, Halimah M.K., and Daud W.M., “Fundamental Glass Science and Technology. A Traning Module. 2011.

6. Mohammed Sabah Ali, Azmah Hanim Mohamed Ariff, Che Nor Aiza Jaafar, Suraya Mohd Tahir, Norkhairunnisa Mazlan, Khamirul Amin Matori, Hameed Naser, “Factors Affecting the Porosity and Mechanical Properties of Porous Ceramic Composite Materials” Reference Module in Materials Science and Materials Engineering, Oxford: Elsevier; 2017. pp. 1-54. (ISBN: 978-0-12-803581-8)

RESEARCH PROJECT (GRANTS) Main Researcher (Completed)

1. The Study of Nanoparticle Er3+ embedded in Tellurite Glass, Research University Grant, 2008 – 2009, RM30,000

2. Kinetics of Phase Formation, Crystallization, and Elastic Properties of Willemite-based Glass Ceramics, Fundamental Research Grant Scheme, 2009 – 2011, RM38,000

63

3. Producing Mullite-based Thermal Insulator from Rice Husk Ash and Al2O3, Research University Grant, 2011 – 2013, RM160,000

4. Synthesis of multifunctional Willemite based Glass Ceramic Doped with Transition Metal and Rare Earth Ions, Research University Grant (Geran Putra-Berkumpulan), 2013 – 2015, RM127,000

5. Synthesis, Structural and OpticalProperties of Willemite Based Glass Ceramic doped with Transition Metal and Rare Earthfor Future Optical and PhotoluminescentDevices, Fundamental Research Grant Scheme, 2013 – 2015, RM95,000

6. Macroporous 45S5 Bioglass®-derived Reinforced Hydroxyapatite glass–ceramic scaffolds, Exploratory Research Grant Scheme, 2013 – 2016, RM132,000

Co-Researcher (Completed)

1. Compositional and Structural Effects on the Thermal Transport Properties of Glass and Glass-ceramics, Fundamental Research Grant Scheme, 2007 – 2009, RM124,000

2. Microstructure and Physical Study of TeO2-based Materials by Sol-gel and Melt Quenching Technique, Fundamental Research Grant Scheme, 2007 – 2008, RM61,000

3. Determination of Permittivities of Constituents of Oil Palm Fruits Using an Artificial Neural Network Approach, Fundamental Research Grant Scheme, 2009 – 2011, RM99,200

4. Compositional and Structural Effects on Phonon and Electrons Heat Carriers in Glass Ceramics, Fundamental Research Grant Scheme, 2010 – 2012, RM96,000

5. Synthesis and Properties of Silica-based Glass Ceramics Doped with Bismuth Oxide Nanoparticles, Fundamental Research Grant Scheme, 2009 – 2011, RM50,000

6. Dielectric Image Waveguide Sensor for Moist Materials, Research University Grant, 2010 – 2012, RM277,000

7. Thermophysical Properties of Glass-Ceramics, Fundamental Research Grant Scheme, 2011 – 2013, RM50,000

8. Modeling Elastic and Thermal Properties of Zinc Oxyfluorotellurite (ZOFT) Based Glass-Ceramic Materials by Homogenization Method, Fundamental Research Grant Scheme, 2013 – 2015, RM78,000

9. Structural and setting reaction studies of dental materials from soda lime silica waste glass and ark clam shell by Solid State NMR Spectroscopy, Fundamental Research Grant Scheme, 2013 – 2015, RM113,000

Main Researcher (ongoing)

1. Identification of Potent Electromagnetic-Wave Absorption Mechanisms for Anti-Radar and Anti-Infrared Coating Materials Applications, Long Range Research Grant Scheme, 2014 – 2018, RM1,455,000

2. Fabrication and Characterization of Willemite based Glass-Ceramic doped Rare Earth Ions derived from Waste Glass as Potential Phosphor Materials in Optoelectronic lndustry, Geran Putra Berimpak, 2017 – 2019, RM100,000

3. Fabrication and Characterization of Co3O4 doped Willemite Based Glass-Ceramics Derived from Waste Rice Husk, Geran Putra Siswazah, 2018 – 2020, RM25,000

4. Physical, Structural, Mechanical and Bioactivity Properties of Glass Ionomer Cement Derived from Vitreous Waste materials, Geran Putra Siswazah, 2018 – 2021, RM25,000

5. A Study of Ferrite Polymer Composite Materials as Microwave Absorber, Geran Putra Siswazah, 2017 – 2020, RM20,000

64

6. Enhancement on structural and mechanical properties of calcium fluoroaluminosilicate bioglass-ceramics for dental applications, Fundamental Research Grant Scheme, 2019– 2020, RM70,000

Co-Researcher (ongoing)

1. Optical and electrical studies of Willemite based glass ceramic, Research University Grant (Geran Putra-Berkumpulan), 2013 – 2015, RM124,000

2. Development and Characterization of Visible LED from Willemite based Glass Ceramics, Research University Grant (Geran Putra-Berkumpulan), 2013 – 2015, RM149,000

3. Thermal Diffusivity Properties of Doped Willemite Glass-ceramics Synthesized from Soda Lime Silicate Glass Waste, Fundamental Research Grant Scheme, 2013–2015, RM71,000

4. Characterizations and morphology of Tebermorite and Jennite like Calcium Silicate Hydrate (C-S-H) during Hydration of Nano Pozzolanic Modified Binder (NPMB), RACE, 2014 – 2016, RM78,000

5. Kinetic analysis of heavy metal and bacteria removal using PEI/nano-Ag membrane incorporated with biomass-based Activated Carbon, Fundamental Research Grant Scheme, 2014 – 2017, RM134,300

6. Development and synthesis of willemite based glass-ceramic doped transition metal ions derived from waste glass as potential phosphor materials in opto-electronic industry, Fundamental Research Grant Scheme, 2015 – 2017, RM78,000

7. Studies on the Development of Graphene-MWCNTs-PET Nanocomposites as a Conducting Thick Film, Fundamental Research Grant Scheme, 2015 – 2018, RM137,000

8. Applicafion and Assessment of Artificial Neural Networks for Predicting Elastic and Thermal Properties of Functional Borate and Tellurife Glass Systems, Geran Putra Berimpak, 2017 – 2019, RM99,000

9. Fabrication and Characterization of Willemite Based Glass-Ceramic Nanocomposife Doped Transition Metal lons Derives from Zinc Boro Soda Lime Silica Glass as Potent Phosphor Materials, Geran Putra -Inisiatif Putra Muda, 2017-2019, RM60, 000

AWARD/RECOGNITION Research

1. Anugerah Penyelidik Cemerlang, Fakulti Sains dan Pengajian Alam Sekitar, Universiti Putra Malaysia, 2002.

2. Gold Medal, Synthesis and Elastic Properties of Borate and Phosphate Glasses, Invention and Research Exhibition 2002, Universiti Putra Malaysia.

3. Silver Medal, Comparative Studies on the Elastic Properties of Bismuth Borate and Bismuth Phosphate Glass System, UPM Invention, Research and Innovation Exhibition 2007, Universiti Putra Malaysia, 2007

4. Bronze Medal, Stabilization and Recycling of Agricultural Based Residues as Potential Glass-Ceramic Based Application; UPM Invention, Research and Innovation Exhibition 2007, Universiti Putra Malaysia, 2007

5. Silver Medal, Effect of Zinc on Physical Properties of Tellurite Glass, UPM Invention, Research and Innovation Exhibition 2008, Universiti Putra Malaysia, 2008

6. Silver Medal, Elastic Properties of Zinc Borotellurite Glasses, UPM Invention, Research and Innovation Exhibition 2009, Universiti Putra Malaysia, 2009

65

7. Bronze Medal, Preparation and Physical Characterizations of Borosilicate Glass from Local Silica Sand for Laboratory Glassware, UPM Invention, Research and Innovation Exhibition 2011, Universiti Putra Malaysia, 2011

8. Bronze Medal, Elastic Moduli Prediction and Correlation in Soda Lime Silicate Glasses Containing ZnO, UPM Invention, Research and Innovation Exhibition 2011, Universiti Putra Malaysia, 2011

9. Silver Medal, Synthesis and Physical Characterization of Silica Based Glass from Rice Husk, UPM Invention, Research and Innovation Exhibition 2011, Universiti Putra Malaysia, 2011

10. Silver Medal, New Zinc Oxyfluorotellurite Glass for Optical Devices, UPM Invention, Research and Innovation Exhibition 2011, Universiti Putra Malaysia, 2011

11. Silver Medal, Physical Studies of Borotellurite Glass Doped with Manganase, UPM Invention, Research and Innovation Exhibition 2011, Universiti Putra Malaysia, 2011

12. Gold Medal, Characterization of Clay from Southwestern Sabah, Pertandingan Penyelidikan dan Rekacipta UMS (PEREKA 2011), Universiti Malaysia Sabah, 2011

13. Best Poster Award, Boundry Current Transport in YBa2Cu3O7-δ High Temperature Superconductors Via Materials Processing and Chemical Doping, Regional Fundamental Science Congress 2011, Universiti Putra Malaysia, 2011

14. Silver Medal, Novel High Potential and Low-Cost Material for LED Phosphor, UPM Invention, Research and Innovation Exhibition 2016, Universiti Putra Malaysia, 2016

15. Certificate of Excellent, Researcher for the Year 2017-MSCL, Institute of Advance Technology, Universiti Putra Malaysia, 2018 (with travel grant RM 4000).

16. Congress Poster Award, “Influence of Tungsen Oxide on Structural, Physical and Elastic Properties of Zinc Borotellurite Glass System”, 11th International Fundamental Science Congress (iFSC2019), Palm Garden Hotel, Putrajaya, Malaysia, 2019.

17. Best Poster Award, “The Influences of Ageing Time on Glass Ionomer Cement Fabricate from Calcium Fluoroaluminosilicate Glass” Materials Technology Challenges (MTC2019), UPM Serdang, Malaysia, 2019.

18. Silver Medal, “Microwave Absorbtion Performance of CNTs Catalyzed by Waste Mill Scale Nanocomposites as Potential Anti-Radar Coating Material” Materials Technology Challenges (MTC2019), UPM Serdang, Malaysia, 2019.

19. Silver Medal, “Broadband Microwave Absorbing Performance of Multiwalled CNT/Epoxy Resin Nanocomposites” Materials Technology Challenges (MTC2019), UPM Serdang, Malaysia, 2019.

20. Gold Medal, “Enhancement of Microwave Absorbing Properties via Double-Layer Structuring of CNT/Epoxy and Carbon Black/Epoxy Nanocomposites” Materials Technology Challenges (MTC2019), UPM Serdang, Malaysia, 2019.

21. Gold Medal, “Microwave Absorbtion Performance of Hybrid Nanocomposites at Higer Gigahertz Frequency” Materials Technology Challenges (MTC2019), UPM Serdang, Malaysia, 2019.

22. Gold Medal, “Effect of Rare Earth/Transition Metal Ions on Zinc Silicate Glass Ceramics for Optical Applications” Materials Technology Challenges (MTC2019), UPM Serdang, Malaysia, 2019.

23. Silver Medal, “Scientific Approach of Production of SiO2 Derived from Agricultural Waste Products” Materials Technology Challenges (MTC2019), UPM Serdang, Malaysia, 2019.

66

Teaching 1. Department of Physics Popular Lecturer Award, Quality Day Faculty of Science 2007,

22 November 2007. 2. Excellent Education Award, Science Quality Month 2009, 16 December 2009. 3. Certificate of Teaching Excellence, PHY 4203-Sains Bahan, Semester Kedua Sesi

2009/2010 (4.45) 4. Certificate of Teaching Excellence, PHY 4203-Sains Bahan, Semester Pertama Sesi

2009/2010 (3.974) 5. Certificate of Teaching Excellence, PHY 3104-Fizik II, Semester Kedua Sesi 2009/2010

(3.99) 6. Certificate of Teaching Excellence, PHY 3103-Fizik I, Semester Pertama Sesi 2010/2011

(4.67) 7. Certificate of Teaching Excellence, PHY 3104-Fizik II, Semester Kedua Sesi 2010/2011

(4.57) 8. Certificate of Teaching Excellence, PHY 4203-Sains Bahan, Semester Pertama Sesi

2011/2012 (4.30) 9. Certificate of Teaching Excellence, PHY 4203-Sains Bahan, Semester Kedua Sesi


2011/2012 (4.81) 11. Certificate of Teaching Excellence, PHY 3103-Fizik I, Semester Pertama Sesi 2011/2012

(4.60) 12. Certificate of Teaching Excellence, PHY 3104-Fizik II, Semester Kedua Sesi 2011/2012

(4.62) 13. Certificate of Teaching Excellence, PHY 4203-Sains Bahan, Semester Kedua Sesi





2013/2014 (4.65) 18. Certificate of Teaching Excellence, PHY 4204-Kaedah Analisis Struktur dan

Mikrostruktur, Semester Pertama, Sesi 2014/2015 (4.83) 19. Certificate of Teaching Excellence, PHY 4203-Sains Bahan, Semester Kedua Sesi



2015/2016 (4.41) Supervision

1. Certificate of Appreciation, Dr Ismayadi Ismail, Awarded a PhD with Distinction, 2012. 2. Supervisor, Dr Lim Way Fong, “Application of Glass Reinforced Hydroxyapatite

Composites in the Tissue Engineering Scaffolds”, 2014-2015.

67

3. Certificate of Completion (Post Doctoral Researcher), Dr Lim Way Fong, “Application of Glass Reinforced Hydroxyapatite Composites in the Tissue Engineering Scaffolds”, 2014-2015.

4. Supervisor; Visiting Researcher, Dr. Mohd Sabri Mohd Ghazali, School of Fundamental Science, Universiti Malaysia Terengganu, Terengganu Darul Iman, Mac 2015-Ogos 2015.

5. Certificate of Appreciation, Dr Farhad Gharavi, Graduate on time (6 Semester), 2015. 6. Certificate of Appreciation, Dr Farhad Ostovan, Graduate on time (7 Semester), 2015. 7. Certificate of Appreciation, Dr Mohd Hafiz Bin Mohd Zaid, Graduate on time, 2016. 8. Certificate of Appreciation, Dr Zarifah Hj Nadakkavil Alassan, Graduate on time, 2016. 9. Supervisor, Dr Mohd Hafiz Bin Mohd Zaid, “Identification of Potent Electromagnetic-

Wave Absorption Mechanisms for Anti-Radar and Anti-Infrared Coating Materials Applications”, 2016-2017.

10. Certificate of Appreciation, Mr Alibe Ibrahim Mustapha, Graduate on time, 2017. 11. Certificate of Appreciation, Mr Mohammad Zulhasif bin Ahmad Khiri (GS42182), 2017. 12. Certificate of Achievement, Mohammad Zulhasif bin Ahmad Khiri (GS50490), ITMA-

Best Master of Science Student (2017)- Master of Science in Advanced Materials (as Supervisor)

13. Certificate of Appreciation, for Industrial Training Supervisor, Universiti Teknologi Mara (UiTM)-Universiti Putra Malaysia (UPM) Industrial Training 2017, 2017.

14. Certificate of Appreciation, Dr. Anwar Ali Baqer, Graduate on time, 2018. 15. Certificate of Appreciation, Dr. Meysam Toozandehjani, Graduate on time, 2018. 16. Certificate of Completion, UPM-UiTM Industrial Training 2018 from The MASS

Malaysia (as Industrial Training Supervisor). 17. Certificate of Appreciation, Dr. Zamratul Maisarah Mohd Ismail, Graduate on time, 2018. 18. Certificate of Appreciation, Dr Alibe Ibrahim Mustapha, Graduate on time, 2019.

Publication

1. Certificate of Appreciation, Anugerah Kecemerlangan Penerbitan (H-Index and Citation), 2015.

2. Cover photograph, lnternational Journal of Materials Research 6/2015; Farhad Ostovan, Khamirul Amin Matori, Meysam Toozandehjani, Arshin Oskoueian, Hamdan Mohamed Yusoff, Robiah Yunus, Azmah Hanim Mohamed Ariff, (Corresponding author), “Microstructural evaluation of ball-milled nano Al2O3 particulate-reinforced aluminum matrix composite powders”, International Journal of Materials Research, 106(6), 636-640, (2015).

3. Diffraction Data for Database Inclusion in The International Centre for Diffraction Data (ICDD), from paper: Mohd Hafiz Mohd Zaid, Khamirul Amin Matori, Sidek Hj Abdul Aziz, Halimah Mohamed Kamari, Zaidan Abdul Wahab, Yap Wing Fen, Ibrahim Mustapha Alibe, (Corresponding author), “Synthesis and characterization of low cost willemite based glass–ceramic for opto-electronic applications”, Journal of Materials Science: Materials in Electronics, 27 (11), 11158-11167, (2016).

Services

1. Certificate of Appreciation, Carry out outstanding responsibilities throughout the service at the Pusat Pengajian Matrikulasi, UPM, 1995-2000.

2. Certificate of Appreciation, Excellent Service Awards, 2001. 3. Certificate of Appreciation, Assisting Faculty to develop and successfully implement

Quality Management System to obtain MS ISO 9001: 2000 certification, 2002.

68

4. Certificate of Commendation, Secetary of Association of Malaysian Graduates Sheffield, United Kingdom, 2003-2004.

5. Certificate of Appreciation, Excellent Service Awards, 2008. 6. Certificate of Appreciation, Faculty Excellent Service Award, 2009. 7. Certificate of Appreciation, Excellent Service Awards (APC), 2009. 8. Certificate of Appreciation, Faculty Excellent Service Award, 2010. 9. Certificate of Appreciation, Excellent Service Awards, 2010. 10. Certificate of Appreciation, Excellent Service Awards, 2011. 11. Certificate of Appreciation, Anugerah Perkhidmatan Cemerlang, 2012. 12. Certificate of Appreciation, Anugerah Perkhidmatan Cemerlang, 2013. 13. Certificate of Appreciation, Anugerah Perkhidmatan Cemerlang, 2014. 14. Certificate of Appreciation, Anugerah Perkhidmatan Cemerlang (APC-Ketua Makmal),

2014. 15. Certificate of Appreciation, Anugerah Perkhidmatan Cemerlang, 2015. 16. Certificate of Appreciation, Anugerah Perkhidmatan Cemerlang, 2016. 17. Certificate of Appreciation, Anugerah Perkhidmatan Cemerlang, 2017. 18. Certificate of Appreciation, Anugerah Perkhidmatan Cemerlang, 2018. 19. Certificate of Appreciation, Anugerah Perkhidmatan Cemerlang (APC-Timbalan Dekan),

2018. REVIEWED MANUSCRIPTS

1. Approximations for higher order boundary value problems using non-polynomial quadratic spline based on off-step points, Journal of King Saud University – Science, 2018

2. Investigation of Double Layered Gamma-Ray Shielding Enclosures, Radiation Physics and Chemistry, 2018

3. Effect of Isothermal Aging on the Resistivity of lead Free Sn-5wt%Sb Solder Alloy, Journal of Engineering Research and Reports, 2018

4. Highly efficient white light-emitting diode by using purple light chip and yellow-green phosphor, Journal of Luminescence, 2018

5. Effect of Precipitate Evolution on the Corrosion Behavior under Alternating Salt-spray Environment of Friction Stir Welded Joints of AA2060-T8 Alloy, Transactions of Nonferrous Metals Society of China, 2018

6. An optimization approach of selective laser sintering considering energy consumption and material cost, Journal of Cleaner Production, 2018

7. Approximations for higher order boundary value problems using non-polynomial quadratic spline based on off-step points, , Journal of King Saud University – Science, 2018

8. Effect of HNO3 Concentration on Etch Rate and Structure of Silicon Wafer Etched in HF Solution, IOP Conference Series: Materials Science and Engineering Journal, 2018

9. Radiation shielding properties of pentaternary borate glasses using MCNPX code, Journal of Physics and Chemistry of Solids, 2018

10. From waste glass to building materials - an innovative sustainable solution for waste glass, Journal of Cleaner Production, 2018

11. A Study on the Application of gamma transmission Techniques on the quality control of sandcrete block, Physical Science International Journal, 2018

12. An optimization approach of selective laser sintering considering energy consumption and material cost, Journal of Cleaner Production, 2018

69

13. Dielectric properties of polycaprolactone-Oil palm empty fruit bunch fiber at microwave frequency, International Journal of Engineering and Technology, 2018

14. Rejection and correction of the imposed fracture mechanics singularity approach with its associated tree modes of crack separation, Open Science Journal, 2018

15. Structural transformations and optical properties of glass-ceramics based on ZnO, β- and α-Zn2SiO4 nanocrystals and doped with Er2O3 and Yb2O3: Part I. The role of heat-treatment, Journal of Luminescence, 2018

16. An innovative method for environmental evaluation of industrial wastes management practices: case Savojbolagh industrial zone, Iran, Journal of Environmental Chemical Engineering, 2018

17. Gamma ray buildup factors of lithium borate glasses doped with minerals, Journal of Alloys and Compounds, 2018

CONSULTATION/SUMBANGAN KEPADA MASYARAKAT

1. Ceramah Motivasi Pelajar, Sekolah Rendah Agama Batu 4 Sepintas, Sabak Bernam, 2008.

2. Ahli Perunding, Pelaksanaan Instrumen My3S, Jabatan Pengajian Tinggi Malaysia, (Bahagian Pengurusan Pembangunan Akademik), Universiti Darul Iman Malaysia (UDM) dan Universiti Malaysia Terengganu (UMT), 24-25/2/2010

3. Ahli Penyelidik, Pelaksanaan Instrumen My3S, Jabatan Pengajian Tinggi Malaysia, (Bahagian Pengurusan Pembangunan Akademik), Jabatan Pengajian Tinggi Malaysia, (Bahagian Pengurusan Pembangunan Akademik), 2010

4. Pembimbing Projek Penyelidikan Pelajar MRSM Tun Ghafar Baba “The Potential of Rice Husk as a New Source of Piezo-Electric for Future Clean Energy”, 2010.

5. Pengarah, ‘Kem Little Einstein 2011’ bersama Sekolah Menengah Kebangsaan Taman selesa Jaya 2, 27-30 Mei 2011.

6. Ketua Jawatankuasa Makmal, Program Global I-Lead Team (GILT) MRSM Tun Ghafar Baba, 14-21 Desember 2012.

7. Penyelia Projek, Program Global I-Lead Team (GILT) MRSM Tun Ghafar Baba, 14-21 Desember 2012.

8. Penasihat/Pembimbing, Pelajar MRSM Tun Ghafar Baba, “Preparation of Willemite Doped Rare Earth for Optical and Photoluminescence Properties”, Terpilih ke Peringkat Antarabangsa- International Environment Project Olympiad, INEPO EUROASIA 2013, 3-7 April 2013, Baku Azerbaijan.

9. Pensyarah Pembimbing, Program Nobel Laureates Outreach Camp (NLOC) 2012- ‘Scientists of Tomorrow’, “Effect of Heat Treatment on the Bulk density and Linear Shrinkage of Glass Ceramic” 2-5 Julai 2012.

10. Member, Technical Assessment Panel for MiGHT Technology Nurturing (Biotechnology and Biotech industry cluster), 2013.

11. Pensyarah Pembimbing, Program Nobel Laureates Outreach Camp (NLOC) 2013- ‘Scientists of Tomorrow’, 2013.

12. Head Reseacher, “development of Technology Related to Friction Stir Welding” with C.M.E. Industrial Automation Sdn. Bhd. (2014-date). Have NDA sign at 27 October 2014 & received grant USD 10,000.00. From the collaboration 3 Undergraduate, 1 MSc and 1 PhD graduated, 1 PhD submitted his thesis.

13. Head Reseacher, On 22 Disember 2014, C.M.E. Industrial Automation Sdn. Bhd. Agree to pay RM 79,800.00 for repair and upgrade ITMA CNC Machine.

70

14. Pengerusi Program Perkongsian Pintar-3P (6 Ali), Sekolah Rendah Islam ABIM Kajang, 2014.

15. Pembimbing Projek Penyelidikan, Pelajar MRSM Serting, “Dental Fillings Made Out of Mussels Shells”, 2014

16. Penasihat Program, UPM-STEM-The Kuala Lumpur: Engineering Science Fair (KLESF); The Mines International Exhibation and Convention Centre (MIECC), 4-6 November 2016.

17. Pensyarah Pembimbing, Program Nobel Laureates Outreach Camp (NLOC) 2018- ‘Scientists of Tomorrow’, 2018.

18. Speaker, "1 Kolej 1 Sekolah 1 Kampung" In conjunction with the 4th Decade of College 5, UPM at SMK Dato Harun, Tanjung Karang, Selangor, 19 Ogos 2017.

PROFESSIONAL MEMBERSHIP/AFFILIATION

1. Member (Membership No. 48239), The American Ceramics Society, 2003 – date 2. Member (Membership No. 1246), Malaysian Institute of Physics, 2010 – date 3. Member (Membership No. 149), Persatuan Sains dan Teknologi Keadaan Pepejal Malaysia 4. Member (Membership No. 15-752), Persatuan Pegawai Akademik Universiti Putra

Malaysia. 5. Member, Persatuan Koprasi Universiti Putra Malaysia.

INVOLVEMENT IN STUDENT DEVELOPMENT (UPM)

1. Advisor, Kem Gerak Ilmu Fizik 2007/2008, 2007 2. Advisor, Kelab Fizik UPM, 2007-2011 3. Pegawai Pemantau, Seminar Pendedahan Dunia Astronomi (Universiti Islam

Antarabangsa Malaysia), 23-24 February 2008 4. Committee Members, Majlis Anugerah Graduan Cemerlang Fakulti Sains 2008, 2008 5. Pegawai Pemantau, Kem Gerak Ilmu Fizik 2008/2009, 2008 6. Pegawai Pemantau, Program Lawatan Sambil Belajar Ke Tenaga Cable Industries Sdn

Bhd, 21 August 2008 7. Pegawai Pemantau, Majlis Makan Malam Kelab Fizik 2008, 2008 8. Committee Members, Majlis Penerangan Jabatan Fizik, Semester 1 2008/2009, 2008 9. Committee Members, Majlis Anugerah Graduan Cemerlang Fakulti Sains 2008, 2008 10. Pegawai Pemantau, Tahun Astronomi UPM 2009, 13-15 Mac 2009 11. Pegawai Pemantau, Bengkel Astronomi dan Cerapan Bintang Berkala 2009, 6-7 Mac

2009. 12. Pegawai Pemantau, Lawatan Ke Kilang Tai Kwong Yokohama (M) Sdn. Bhd, Selangor,

2010 13. Ahli Perunding, Pelaksanaan Instrumen My3S, Jabatan Pengajian Tinggi Malaysia,

(Bahagian Pengurusan Pembangunan Akademik), Universiti Darul Iman Malaysia (UDM) dan Universiti Malaysia Terengganu (UMT), 24-25/2/2010

14. Ahli Penyelidik, Pelaksanaan Instrumen My3S, Jabatan Pengajian Tinggi Malaysia, (Bahagian Pengurusan Pembangunan Akademik), Jabatan Pengajian Tinggi Malaysia, (Bahagian Pengurusan Pembangunan Akademik), 2010

15. Pembimbing Projek Penyelidikan Pelajar MRSM Tun Ghafar Baba, UPM dan MRSM Tun Ghafar Baba, UPM dan MRSM Tun Ghafar Baba, 2010

16. Pegawai Pemantau, Kem Gerak Ilmu Fizik 2010, 2010 17. Pegawai Pemantau, Lawatan Ilmiah ke VTR Sdn. Bhd, Sungai Buluh, Selangor, 7 April

2011.

71

18. Pegawai Pemantau, Lawatan Sambil Belajar Ke Agensi Nuklear Malaysia, 17 February 2011.

19. Pegawai Pemantau, Lawatan Sambil Belajar ke Perwaja Steel Sdn Bhd, Kemaman, Terengganu, 17 May 2012.

20. Pegawai Pembimbing, Lawatan Ilmiah Ke Kilang Malaysian Sheet Glass (MSG) Sdn. Bhd., 26 April 2013.

21. Wakil Jabatan, Program Pemantauan dan Bimbingan Pelajar Kelab Al-Biruni, Fakulti Sains, Universiti Putra Malaysia, 2014.

COURSES/WORKSHOP/SEMINAR/ACTIVITIES ATTENDED FOR SKILL DEVELOPMENT

1. Leadership II course, Student Affairs Division, UPM, 5-8 Disembers 1989. 2. Nuang Mountain climbing expeditions, Hulu Langat, Selangor, 28-31 August 1993. 3. Course on General Induction, 6-30 May 1996, Universiti Pertanian Malaysia. 4. Course on Special Induction Module, 3-8 June 1996, Universiti Pertanian Malaysia. 5. Induction Course on Teaching and Learning, Faculty of Education, May 12-16, 1997,

Universiti Pertanian Malaysia. 6. Online Courses Application Course, Multimedia and Software Institute, UPM, 11-12

Disember 2001. 7. National Core Course Building (Teachers and IPT’s Lecturers), Bureau of Tatanegara, Kem

Bina Negara Ulu sepri, Negeri Sembilan, 26-29 March 2002. 8. Course on Special Induction Module (Management and Professional Group), Universiti

Putra Malaysia, 16-18 October 2002. 9. Course on Basic Education Exposure for UPM Academic Officer, Corprat Planning

Division and Faculty of Educational Studies, UPM, 15-19 July 2002. 10. MS ISO 9001: 2000 Intensive Workshop, Faculty of Science and Environmental Studies,

UPM, Century Mahkota Hotel, Melaka, 5-7 April 2002. 11. Course on Towards Successful Research, Hotel Palm Garden, IOI Resort, Putrajaya, 22-23

December 2005. 12. Workshop on Strengthening Research Project Management at UPM 2007, Management

Lecture Hall 1, Faculty of Economics and Management, UPM, 6 December 2007. 13. WIPO National Workshop on Patent Cooperation Treaty (PCT), WPO/MyIPO, Johor

Baharu, 30-31 May 2007 14. Course on ISO/IEC 17025:2005 Introduction, SIRIM Training Services Sdn. Bhd., Bangi,

13-14 February 2007 15. MS ISO 9001: 2000 Induction Workshop, For New Officers and New Auditor, Faculty of

Science, UPM, Gemilang Scientist Room, Faculty of Science, UPM, 25-26 January 2007 16. Course on IPC Compliant ISO 9000:2000 Series Auditor/Lead Auditor Training,

International Personel Certification Association, Langkawi, 25-29 June 2007 17. Physics Department Calibration Workshop, Physics Department, Faculty of Science, UPM,

Scientist Gemilang Room, Faculty of Science, UPM, 17-18 May 2007 18. Strengthening of Knowledge Workshop, Faculty of Science, UPM, 29 July 2007 19. Human Capital Development Workshop Department of Physics Series III, Department of

Physics, Faculty of Science, UPM, Faculty of Science, UPM, 13-15May 2008 20. Seminar on World Astronomy Disclosure & Astrophotography Workshop, IIUM

International Islamic University Malaysia, 23-24 February 2008

72

21. National Build Course (BASIC), Young Lecturer, Ministry of Higher Education, Bureau of Tatanegara (BTN), Prime Minister 's Department, Gunung Bina National Buildings Camp, Kulai, Johor, 8-11 August 2008.

22. Workshop on Implementation of Learning Outcomes and Soft Skills in Teaching, Faculty of Science, UPM, Scientist Gemilang Room, Faculty of Science, UPM, 7 August 2008

23. Workshop on e-Kuliah and e-Bibliography for Academics, Faculty of Science, UPM, Department of Mathematics, Faculty of Science, UPM, 21 March 2008

24. MS ISO 9001: 2000 Induction Workshop For Old and New Internal Auditors, Faculty of Science, UPM, Scientist Gemilang Room, Faculty of Science, UPM, 29 February 2008

25. DSC Full Course Training, Perkin Elmer Sdn. Bhd., 9 September 2008. 26. Advanced Analysis of XPS on Solid-State and Surface Analysis in Materials, QC Scientific

(M) Sdn. Bhd., QC Scientific (M) Sdn. Bhd., 21 Mei 2008 27. Materials Characterization with Energy Dispersive X-Ray Spectrometer (EDX) and X-Ray

Diffractometer (XRD), QC Scientific (M) Sdn. Bhd., QC Scientific (M) Sdn. Bhd., 20 August 2008

28. Convention Faculty of Science, Main Lecture Hall, Faculty of Medicine and Health Sciences, UPM, 23-24 December 2008.

29. Course for Assessment of Competency Level 3, UPM, 9-17 June 2008. 30. Convention Faculty of Science, Auditorium Jurutera, Faculty of Engineering, UPM, 2

December 2009. 31. MS ISO 9001: 2008 Quality Management System Awareness Workshop for New Member

of Faculty of Science 2009, Scientist Gemilang Room, Faculty of Science, UPM, 10 Mac 2009.

32. Energy Dispersion Fluorescent X-Ray Spectrometer Shimadzu Corporation, Analytical and Measuring Instrument Division, Shimadzu Corporation, Kyoto, Japan, 14-19 June 2010

33. Workshop on Teaching Approach (LO3), Academic Development Center and Registrar Office, University Islam Center, UPM, 2 July 2010

34. PANalytical X’Pert Highscore Plus Training, PANalytical, Physics Department, Faculty of Science, UPM, 26-27 January 2010.

35. Course for Assessment of Competency Level 5, UPM, 27 September 2010-4 October 2010. 36. Workshop on Appreciation of the National Higher Education Strategic Plan, Ministry of

Higher Education Malaysia: AKEPT, Pan Pacific, KLIA, 1 December 2010 37. Ideal Leadership: An Islamic Perspective, Kementerian Pengajian Tinggi Malaysia:

AKEPT, Hotel Grand Dorsett, Subang Jaya, Selangor, 26-27 July 2010 38. Building Excellent Academic Leaders for Sustainable development: Session 2- How to be

Leaner Centric, Market Focused and Create the Right Environment? Kementerian Pengajian Tinggi Malaysia: AKEPT, Marriott Hotel, Putrajaya, 19-20 April 2010

39. Building Excellent Academic Leaders for Sustainable development: Session 3- Technology Enhanced Learning and Knowledge Management in Driving Academic Excellence, Kementerian Pengajian Tinggi Malaysia: AKEPT, Holiday Inn Kuala Lumpur, Glenmarie Shah Alam, 5-6 July 2010

40. Building Excellent Academic Leaders for Sustainable development: Session 4- Talent and Process Management in Academia: Drivers for Success and Academic Excellence, Kementerian Pengajian Tinggi Malaysia: AKEPT, Marriott Hotel, Putrajaya, 27-28 September 2010

41. Building Excellent Academic Leaders for Sustainable development: Session 5- Brand Leadership Status for Creating World Class Universities, Kementerian Pengajian Tinggi Malaysia: AKEPT, Marriott Hotel, Putrajaya, 15-16 Dicember 2010

73

42. Seminar on Occupational Safety and Health 2011, Universiti Putra Malaysia, Panggung Percubaan, PKKSSAAS, UPM, 12-14 July 2011

43. Intellectual Property Clinic, Faculty of Science and Pusat Pengurusan Penyelidikan (RMC), 15 Jun 2011.

44. Workshop on Strategic Plan 2011 Faculty of Science, Golf Unit, University Agriculture Park, Universiti Putra Malaysia, 17 January 2011.

45. Briefing on Preparation of KBSM Textbook Valuation Starting in 2013: South Zone (Subject: Additional Science), Hotel Avillion Legacy, Melaka, 8-10 February 2012.

46. Workshop on Key Performance Indicator (KPI), Faculty of Science 2012, Palm Garden Hotel, Putrajaya, 16 February 2012.

47. Workshop on Interview Skills, Faculty of Educational Studies, Universiti Putra Malaysia, 18 May 2013.

48. Workshop on Documenting and Implimenting Laboratory QMS MS ISO/IEC 17025:2005 (Laboratory Accreditation), Seminar Room, TNCPI Office, Universiti Putra Malaysia, 24-25 October 2013.

49. Workshop on Advance Materials and Nanotechnology 2013 (WAMN2013), Institute of Advanced Technology (ITMA), Universiti Putra Malaysia, 10-11 September 2013.

50. Workshop on Staff Development, Direction and ITMA KPI 2013, Morib Gold Coast Resort, Banting Selangor, 20-21 April 2013.

51. Journal Article Writing and Publication Workshop, Materials Synthesis and Characterization Laboratory (MSCL), ITMA at OSH Hall, Health and Safety Management Office, Universiti Putra Malaysia, 21-22 August 2014.

52. Putra Colloquium on Nanomedicine 2014 (PUTRACON-2014), Dewan Taklimat, Tower Block, Faculty of Engineering, Universiti Putra Malaysia, 8 April 2014.

53. Putra Colloquium on Graphene 2014 (PUTRA GRAPHENE-2014), Dewan Taklimat, Tower Block, Faculty of Engineering, Universiti Putra Malaysia, 16 December 2014.

54. Measurement Uncertainty, Sirim Training Services Sdn. Bhd., Universiti Putra Malaysia, 21-22 May 2014.

55. Measurement of Uncertainty MS ISO 17025:2005 Bagi Fasa Ke-3, Bilik Seminar, Pejabat TNCPI, Universiti Putra Malaysia, 4-5 Jun 2014.

56. Seminar on Malaysian Standards Relating to Chemical and Materials, Jabatan Standard Malaysia, Kementerian Sains, Teknologi dan Inovasi, The Royale Chulan Damansara, Mutiara Damansara, Petaling Jaya, 17 Disember 2014.

57. Bengkel Penyediaan Kertas Soalan/Skema Jawapan Peperiksaan Akhir Semester 1 2014/2015, Bilik Mesyuarat Jabatan Fizik, Fakulti Sains, Universiti Putra Malaysia, 2 Disember 2014

58. Wisdom Leadership Course Series 2, UPM Education & Training Sdn. Bhd. Klana Resort Seremban, Negeri Sembilan, 20-22 November 2014.

59. Kursus Asas Sains Pengembangan Universiti 2016 Siri 2 Untuk Pegawai Akademik, Dewan Fakulti Pertanian, Universiti Putra Malaysia, 3-5 Jun 2014.

60. Unshackling Young Academics Programme, Auditorium, Bangunan Canselori, 13 April 2016.

61. Kursus Asas Sains Pengembangan Universiti 2016 Siri 1, Bilik Latihan UCTC, Pusat Transformasi Komuniti Universiti (UCTC UPM), Universiti Putra Malaysia, 18-20 July 2016.

62. Workshop on Advance Materials and Nanotechnology 2016 (WAMN2016), The Everly, Putrajaya, Malaysia, 24-25 August 2016.

74