2019 ADEX Award for Design Excellence Wood Panels€¦ · Wood Panels 2019 ADEX Award for Design Excellence. ... global resource for innovative, distinctive and sustainable interior

A Modern Yet Heritage Handcraftsmanship

Chizel®

Wood Panels2019 ADEX Award

for Design Excellence

C ontents

• Introduction to ASI | Architectural Systems, Inc.

• Chizel® Wood Panels

• Inspiration Photos

• Installation Method

• Maintenance, Warranty and Technical Data

• Product Details of Vertical & Horizontal Install

• Discover the ASI Advantage®

What We Are About

ASI | Architectural Systems, Inc. is a leading global resource for innovative, distinctive and sustainable interior finishes.

Foremost architects and designers, along with the broad base of decision makers across all market segments collaborate with ASI for their material expertise, project management from start to finish, material take-offs/on-site support, commitment to service, product solutions, custom capabilities and a robust range of finishes for wall surfaces, flooring and more…

ASI curates dimensional wood panels, high-performing hardwoods, luxury vinyl and porcelain plus natural stone and decorative surfacing material to provide the right aesthetics for your design vision and budget with the added ease of finding it all in one place!

Chizel ® Wood Panels

Echoing the look of heritage handcraftsmanship with a modern balance, the exceptional looking Chizel® Wood Panels showcase an articulated level of detail in nine standard bespoke patterns, each with a high variation in texture. Crafted from Solid Ash, these thermo treated wood panels are mounted on a plywood substrate and can be supplied unfinished, heightening the natural beauty inherent in this new wall surfacing collection.

SPECIFICATIONS:SIZE: 47.25" x 94.5" nominal; custom height available (5' x 10' max)

THICKNESS: 18mm

FINISH: Fumed

SPECIES: Ash

CONSTRUCTION: 6mm Solid Ash wood on 12mm plywood substrate

APPLICATION: Walls, Architectural Millwork, Furniture and Fixture Components

INSTALLATION: Z–Clip

• Can contribute to LEED®

• Please note that variations in color and texture may occur due to the nature of the material

WPFSN202WPFSN195

WPFSN206

WPFSN197 WPFSN199

WPFSN207 WPFSN209

WPFSN200

WPFSN208

Chizel ® Wood Panels

archsystems.com

Inspiration P hotos

Spec ID: WPFSN200 archsystems.com



Instal lation Method

The preferred method of installation is with Z-clips.

Blind fastening methods are the preferred means of installation due to the fact that it allows for prefinished panels to be delivered and installed without damage to the face.

Z-clips generally allow for closer spacing to the wall, approximately 3/16" between the wall surface and the back of a panel. When applying a Z-clip to the back of a panel the relief of the pattern, position and length of the screws used must be taken into consideration in order not to damage the face of the panel.

Wall mounted clips should be secured into the aluminum or wood studs within the wall structure and not fastened only through the drywall or sheetrock unless noted by Architect.

A minimum of 4 attachments points is required over a 94.5" height (custom sizing - 5' x 10' max). (1) 6" from top (1) 6" from bottom then equal spacing for remaining (2) clips.

Clearance must be considered between the top of the panel and the ceiling to allow the panel to be lifted and dropped onto the cleat or Z-clip (1 ½").

Instal lation MethodNever use an adhesive to fix the two parts of the cleat together. MDF is a wood product and will expand and contract due to changes in temperature and humidity. Taking this into account the panels should be allowed to “float” on the clips.

Wood and veneered products are warranted for performance within a range of environmental conditions as specified by the Architectural Woodwork Institute (AWI), and in accordance with approved industry standards for installation, geographic region must be considered while engineering the installation.

When applying a Z-clip to the back of a panel the relief of the pattern, position and length of the screws used must be taken into consideration in order not to damage the face of the panel.

The same consideration for the panel about, the relief of the pattern, position and length of the screws used, must be taken into consideration in order not to damage the face of the panel.

It is the responsibility of the contractor to engineer the installation for its specific application. The following illustrations demonstrate several types of hanging methods.

Panel installs with a butt join between panels.

WALL SURFACE

TYPICAL X-CLIPASSEMBLY

Maintenance, Warranty and Technical DataMAINTENANCESurface should be kept clean with a dry rag or duster to wipe clean

WARRANTYMaterial is to be free from defect upon delivery. Please note that variations in color and texture may occur due to the nature of the material.

TECHNICAL DATA• The panels are thermo-fumed (which is the finish) Ash (species) – No additional finishing is needed unless the specifier wants to adjust the color. In that case an oil can, be topically added on site or in millworkers shop. ASI recommended oil is the Rubio Monocoat system. We recommend a sample to be sent to the designer/millworker to TEST this process prior to doing so on site.

• Species is Ash – no other species of wood is available.

• Custom sizes are available – standard is 47.25" x 94.5" panels. Please contact sales (max size is 5′ x 10′).

• Plywood backer – overall thickness is 15mm – 5mm Solid Ash wood on a 10mm plywood backer.

• NO Factory applied fire rating or coating available.

• Panels are NOT available pattern matched/continuous pattern from panel to panel. A ¼″ gap between panels is required & installer MUST paint the substrate to match prior to installation. EACH PANEL has a Pattern repeat: 600 x 600 mm on each 47.25″ x 94.5″ panel.

• The panels are NOT made with a directional PATTERN. The panel can be installed VERTICALLY (47.25″ wide x 94.5″ tall) or HORIZONTALLY (94.5″ wide x 47.25″ tall). The designer/architect MUST indicate the design intent of the panels on their drawing, so material is ordered correctly.

• Trim pieces available upon request of fumed Ash.

Product Details of Vertical & Horizontal Instal lWPFSN195 WPFSN197

HORIZONTAL INSTALL 94.5" WIDE X 47.25" TALL HORIZONTAL INSTALL 94.5" WIDE X 47.25" TALL

VERTICAL INSTALL 47.25" WIDE X 94.5" TALL VERTICAL INSTALL 47.25" WIDE X 94.5" TALL

archsystems.com

WPFSN199 WPFSN200



Product Details of Vertical & Horizontal Instal l, cont.

archsystems.com

WPFSN202 WPFSN206




archsystems.com

WPFSN207

HORIZONTAL INSTALL 94.5" WIDE X 47.25" TALL

WPFSN208




archsystems.com

WPFSN209


VERTICAL INSTALL 47.25" WIDE X 94.5" TALL


archsystems.com

Let’s customize and develop! Send an image that you love, and an ASI material specialist will work with you to meet your design intent and budget criteria

Offering a comprehensive range of award-winning innovative and distinctive interior finishes

Explore the Power of Materials® in the ASI Showroom featuring the Next New ThingSM from every collection and full-scale, real world installations

24/7 access to products that transcend trends on archsystems.com

Value engineering and solution based products

National Account program pricing

Project Management Material take off’s/ On-site support

Passionate about realizing your design vision since 1990

Discover the ASI Advantage®

archsystems.com

Contact:Architectural Systems, Inc.archsystems.com

[email protected] | T: 212.206.1730

Thank You!

2019 ADEX Award for Design Excellence

Documents

2019 ADEX Award for Design Excellence Wood Panels€¦ · Wood Panels 2019 ADEX Award for Design Excellence. ... global resource for innovative, distinctive and sustainable interior