2016 THORDON DISTRIBUTOR PRODUCT GUIDE · TB Product Guide Int’l. 2016 T H O R D O N B E A R I N G S I N C. 2016 THORDON DISTRIBUTOR PRODUCT GUIDE Effective January 01, 2016

TB Product Guide Int’l. 2016

T H O R D O N B E A R I N G S I N C.

2016 THORDON DISTRIBUTOR

PRODUCT GUIDE

Effective January 01, 2016

Effective: January 01, 2016Supersedes: January 01, 2015

Contents

Standard Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Machining Charges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

SXL Metre Long Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

SXL Strategic Stock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

XL Metre Long Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

SXL Fully Grooved Bearings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

XL Fully Grooved Bearings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Composite Dredge, Pump & Industrial Bearings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

RiverTough Propeller Shaft Bearings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

COMPAC Bearings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

ThorPlas-Blue Metre Long Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

ThorPlas-Blue Rods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

ThorPlas-Blue Split Spherical Bearing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

ThorPlas-White Metre Long Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

ThorPlas-White Rods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

SXL Staves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

XL Staves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

SXL Metre Long Rods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

XL Metre Long Rods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

SXL Screw Conveyor Bearings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

XL Screw Conveyor Bearings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

SXL Sheets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

ThorPlas-Blue Sheets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

XL Sheets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Regular Sheets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

SXL Thor-Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Specialty Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

TG100 Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Terms & Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

For any other Thordon products not listed in this price list please contact Thordon BearingsCustomer Service. The Thordon Product Guide and Price List will be reviewed on an annual basis. Thordon reserves the right to ammend pricing at any time with 30 days notice.


Standard Items

PricingPrices contained in this Product Guide & Price List are SUGGESTED LIST prices and are in Canadian dollars(CAD). Your Distributor Discount will be applied when an order is placed; specialty items have a separatediscount. All prices are: Air Shipments: CPT (named place of destination), Sea Freight: CFR (named placeof destination). Transportation costs to the account of buyer. Terms and conditions are listed on the lastpage.

Placing an OrderPlease fax or email your orders directly to Customer Service who will ensure your order is checked anddelivered as required. Kindly provide the following information for prompt delivery:

- Thordon Part No., Product Description and Quantity- Contact Name and telephone number or fax number or email in case any

questions arise- Application information (application, vessel name, place of install, etc.)

FAX: +1.905.335.0209 EMAIL: [email protected] TEL: +1.905.335.1440

For Product Advice, Selection or Technical SupportIf you require assistance in selecting the best Thordon product for your application or sizing requirements, please contact Customer Service.

For Status of Existing OrderIf you wish to know the shipment date or details of an existing order, please contact Customer Service.

Page 1

Fully Finished Grooved Bearings (except Composite)

Shaft Diameter Setup Charge Machining

Up to 80mm (3-1/8”)

80 to 152mm (3-1/8” to 6”)

Greater than 152mm (6”)

Fully Finished Composite Bearings

Shaft Diameter Setup Charge Machining

Up to 124mm (4-7/8”)

125 to 197mm (5” to 7-3/4”)

Greater than 197mm (7-3/4”)

NOTEPlease contact Thordon Bearings Customer Service for machining charges for other items.

Machining Charges

All machining charges are Net Prices (CAD) and added to the cost of the bearing.

Page 2

SXL METRE LONG TUBESMarine Applications (rudder bearings, fairleads, winches, etc.)

- Grease-free, low operating coefficient of friction, highabrasion resistance, approved to design pressures up to 12N/mm2, easily machined

Industrial Applications (pump bearings, hydro-turbine main guide bearings)

- Dry start-up capability, grease-free, low dry coefficient offriction, high abrasion resistance, temperature limits of 100°C(212°F) dry and 60°C (140°F) in water, pH range of 5-10

Profile

NOTESAll tubes are supplied rough molded and sizes are nominal. Actual O.D. and I.D. have a minimum extra 2.5mm (3/32")oversize and undersize respectively to allow for machining.


Bearing

Outside

Diameter

(mm)

Bearing

Inside

Diameter

(mm)

Bearing

Length

(mm)

Approx.

Weight

(kg)

Bearing

Outside

Diameter

(inches)

Bearing

Inside

Diameter

(inches)

Bearing

Length

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Number

40 20 1000 1.4 1.575 0.787 39.4 3.2 F3M040020

50 20 1000 2.3 1.969 0.787 39.4 5.1 F3M050020

50 30 1000 1.9 1.969 1.181 39.4 4.2 F3M050030

60 20 1000 3.4 2.362 0.787 39.4 7.4 F3M060020

60 30 1000 3.0 2.362 1.181 39.4 6.5 F3M060030

60 40 1000 2.4 2.362 1.575 39.4 5.3 F3M060040

70 20 1000 4.6 2.756 0.787 39.4 10.2 F3M070020

70 30 1000 4.2 2.756 1.181 39.4 9.3 F3M070030

70 40 1000 3.6 2.756 1.575 39.4 8.0 F3M070040

70 50 1000 2.9 2.756 1.969 39.4 6.3 F3M070050

80 20 1000 6.0 3.150 0.787 39.4 13.3 F3M080020

80 30 1000 5.6 3.150 1.181 39.4 12.4 F3M080030

80 40 1000 5.1 3.150 1.575 39.4 11.1 F3M080040

80 50 1000 4.3 3.150 1.969 39.4 9.5 F3M080050

80 60 1000 3.3 3.150 2.362 39.4 7.4 F3M080060

90 20 1000 7.7 3.543 0.787 39.4 16.8 F3M090020

90 30 1000 7.3 3.543 1.181 39.4 16.0 F3M090030

90 40 1000 6.7 3.543 1.575 39.4 14.7 F3M090040

90 50 1000 5.9 3.543 1.969 39.4 13.0 F3M090050

90 60 1000 5.0 3.543 2.362 39.4 10.9 F3M090060

90 70 1000 3.8 3.543 2.756 39.4 8.4 F3M090070

100 20 1000 9.4 3.937 0.787 39.4 20.8 F3M100020

100 30 1000 9.0 3.937 1.181 39.4 19.9 F3M100030

100 40 1000 8.5 3.937 1.575 39.4 18.6 F3M100040

100 50 1000 7.7 3.937 1.969 39.4 16.9 F3M100050

100 60 1000 6.7 3.937 2.362 39.4 14.8 F3M100060

100 70 1000 5.6 3.937 2.756 39.4 12.4 F3M100070

100 80 1000 4.3 3.937 3.150 39.4 9.5 F3M100080

110 20 1000 11.4 4.331 0.787 39.4 25.1 F3M110020

110 30 1000 11.0 4.331 1.181 39.4 24.2 F3M110030

110 40 1000 10.4 4.331 1.575 39.4 23.0 F3M110040

110 50 1000 9.7 4.331 1.969 39.4 21.3 F3M110050

110 60 1000 8.7 4.331 2.362 39.4 19.2 F3M110060

110 70 1000 7.6 4.331 2.756 39.4 16.7 F3M110070

110 80 1000 6.3 4.331 3.150 39.4 13.8 F3M110080

Page 3

NOTESAll tubes are supplied rough molded and sizes are nominal. Actual O.D. and I.D. have a minimum extra 2.5mm (3/32") oversizeand undersize respectively to allow for machining.






Profile

Bearing

Outside

Diameter

(mm)

Bearing

Inside

Diameter

(mm)

Bearing

Length

(mm)

Approx.

Weight

(kg)

Bearing

Outside

Diameter

(inches)

Bearing

Inside

Diameter

(inches)

Bearing

Length

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Number

110 90 1000 4.8 4.331 3.543 39.4 10.5 F3M110090

120 20 1000 13.6 4.724 0.787 39.4 29.9 F3M120020

120 30 1000 13.2 4.724 1.181 39.4 29.0 F3M120030

120 40 1000 12.6 4.724 1.575 39.4 27.7 F3M120040

120 50 1000 11.8 4.724 1.969 39.4 26.0 F3M120050

120 60 1000 10.9 4.724 2.362 39.4 23.9 F3M120060

120 70 1000 9.7 4.724 2.756 39.4 21.4 F3M120070

120 80 1000 8.4 4.724 3.150 39.4 18.6 F3M120080

120 90 1000 6.9 4.724 3.543 39.4 15.3 F3M120090

120 100 1000 5.3 4.724 3.937 39.4 11.6 F3M120100

130 20 1000 15.9 5.118 0.787 39.4 35.0 F3M130020

130 30 1000 15.5 5.118 1.181 39.4 34.1 F3M130030

130 40 1000 14.9 5.118 1.575 39.4 32.8 F3M130040

130 50 1000 14.2 5.118 1.969 39.4 31.2 F3M130050

130 60 1000 13.2 5.118 2.362 39.4 29.1 F3M130060

130 70 1000 12.1 5.118 2.756 39.4 26.6 F3M130070

130 80 1000 10.8 5.118 3.150 39.4 23.7 F3M130080

130 90 1000 9.3 5.118 3.543 39.4 20.4 F3M130090

130 100 1000 7.6 5.118 3.937 39.4 16.7 F3M130100

130 110 1000 5.7 5.118 4.331 39.4 12.6 F3M130110

140 20 1000 18.4 5.512 0.787 39.4 40.5 F3M140020

140 30 1000 18.0 5.512 1.181 39.4 39.7 F3M140030

140 40 1000 17.4 5.512 1.575 39.4 38.4 F3M140040

140 50 1000 16.7 5.512 1.969 39.4 36.7 F3M140050

140 60 1000 15.7 5.512 2.362 39.4 34.6 F3M140060

140 70 1000 14.6 5.512 2.756 39.4 32.1 F3M140070

140 80 1000 13.3 5.512 3.150 39.4 29.2 F3M140080

140 90 1000 11.8 5.512 3.543 39.4 26.0 F3M140090

140 100 1000 10.1 5.512 3.937 39.4 22.3 F3M140100

140 110 1000 8.3 5.512 4.331 39.4 18.2 F3M140110

140 120 1000 6.2 5.512 4.724 39.4 13.7 F3M140120

150 20 1000 21.1 5.906 0.787 39.4 46.5 F3M150020

150 30 1000 20.7 5.906 1.181 39.4 45.6 F3M150030

150 40 1000 20.2 5.906 1.575 39.4 44.3 F3M150040

150 50 1000 19.4 5.906 1.969 39.4 42.7 F3M150050

Page 4







Profile

Bearing

Outside

Diameter

(mm)

Bearing

Inside

Diameter

(mm)

Bearing

Length

(mm)

Approx.

Weight

(kg)

Bearing

Outside

Diameter

(inches)

Bearing

Inside

Diameter

(inches)

Bearing

Length

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Number

150 60 1000 18.4 5.906 2.362 39.4 40.6 F3M150060

150 70 1000 17.3 5.906 2.756 39.4 38.1 F3M150070

150 80 1000 16.0 5.906 3.150 39.4 35.2 F3M150080

150 90 1000 14.5 5.906 3.543 39.4 31.9 F3M150090

150 100 1000 12.8 5.906 3.937 39.4 28.2 F3M150100

150 110 1000 11.0 5.906 4.331 39.4 24.1 F3M150110

150 120 1000 8.9 5.906 4.724 39.4 19.6 F3M150120

150 130 1000 6.7 5.906 5.118 39.4 14.7 F3M150130

160 30 1000 23.6 6.299 1.181 39.4 52.0 F3M160030

160 40 1000 23.0 6.299 1.575 39.4 50.7 F3M160040

160 50 1000 22.3 6.299 1.969 39.4 49.0 F3M160050

160 60 1000 21.3 6.299 2.362 39.4 46.9 F3M160060

160 70 1000 20.2 6.299 2.756 39.4 44.4 F3M160070

160 80 1000 18.9 6.299 3.150 39.4 41.5 F3M160080

160 90 1000 17.4 6.299 3.543 39.4 38.3 F3M160090

160 100 1000 15.7 6.299 3.937 39.4 34.6 F3M160100

160 110 1000 13.9 6.299 4.331 39.4 30.5 F3M160110

160 120 1000 11.8 6.299 4.724 39.4 26.0 F3M160120

160 130 1000 9.6 6.299 5.118 39.4 21.1 F3M160130

160 140 1000 7.2 6.299 5.512 39.4 15.8 F3M160140

170 40 1000 26.1 6.693 1.575 39.4 57.4 F3M170040

170 50 1000 25.3 6.693 1.969 39.4 55.8 F3M170050

170 60 1000 24.4 6.693 2.362 39.4 53.7 F3M170060

170 70 1000 23.3 6.693 2.756 39.4 51.2 F3M170070

170 80 1000 22.0 6.693 3.150 39.4 48.3 F3M170080

170 90 1000 20.5 6.693 3.543 39.4 45.0 F3M170090

170 100 1000 18.8 6.693 3.937 39.4 41.3 F3M170100

170 110 1000 16.9 6.693 4.331 39.4 37.2 F3M170110

170 120 1000 14.9 6.693 4.724 39.4 32.7 F3M170120

170 130 1000 12.7 6.693 5.118 39.4 27.8 F3M170130

170 140 1000 10.2 6.693 5.512 39.4 22.5 F3M170140

170 150 1000 7.7 6.693 5.906 39.4 16.8 F3M170150

180 50 1000 28.6 7.087 1.969 39.4 62.9 F3M180050

180 60 1000 27.6 7.087 2.362 39.4 60.8 F3M180060

180 70 1000 26.5 7.087 2.756 39.4 58.3 F3M180070

Page 5






- Dry start-up capability, grease-free, low dry coefficient offriction, high abrasion resistance, temperature limits of100°C (212°F) dry and 60°C (140°F) in water, pH range of5-10

Profile

Bearing

Outside

Diameter

(mm)

Bearing

Inside

Diameter

(mm)

Bearing

Length

(mm)

Approx.

Weight

(kg)

Bearing

Outside

Diameter

(inches)

Bearing

Inside

Diameter

(inches)

Bearing

Length

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Number

180 80 1000 25.2 7.087 3.150 39.4 55.4 F3M180080

180 90 1000 23.7 7.087 3.543 39.4 52.2 F3M180090

180 100 1000 22.0 7.087 3.937 39.4 48.5 F3M180100

180 110 1000 20.2 7.087 4.331 39.4 44.4 F3M180110

180 120 1000 18.1 7.087 4.724 39.4 39.9 F3M180120

180 130 1000 15.9 7.087 5.118 39.4 35.0 F3M180130

180 140 1000 13.5 7.087 5.512 39.4 29.7 F3M180140

180 150 1000 10.9 7.087 5.906 39.4 24.0 F3M180150

180 160 1000 8.1 7.087 6.299 39.4 17.9 F3M180160

190 60 1000 31.1 7.480 2.362 39.4 68.4 F3M190060

190 70 1000 30.0 7.480 2.756 39.4 65.9 F3M190070

190 80 1000 28.6 7.480 3.150 39.4 63.0 F3M190080

190 90 1000 27.1 7.480 3.543 39.4 59.7 F3M190090

190 100 1000 25.5 7.480 3.937 39.4 56.0 F3M190100

190 110 1000 23.6 7.480 4.331 39.4 51.9 F3M190110

190 120 1000 21.6 7.480 4.724 39.4 47.4 F3M190120

190 130 1000 19.3 7.480 5.118 39.4 42.5 F3M190130

190 140 1000 16.9 7.480 5.512 39.4 37.2 F3M190140

190 150 1000 14.3 7.480 5.906 39.4 31.5 F3M190150

190 160 1000 11.6 7.480 6.299 39.4 25.4 F3M190160

190 170 1000 8.6 7.480 6.693 39.4 18.9 F3M190170

200 70 1000 33.6 7.874 2.756 39.4 73.8 F3M200070

200 80 1000 32.3 7.874 3.150 39.4 71.0 F3M200080

200 90 1000 30.8 7.874 3.543 39.4 67.7 F3M200090

200 100 1000 29.1 7.874 3.937 39.4 64.0 F3M200100

200 110 1000 27.2 7.874 4.331 39.4 59.9 F3M200110

200 120 1000 25.2 7.874 4.724 39.4 55.4 F3M200120

200 130 1000 23.0 7.874 5.118 39.4 50.5 F3M200130

200 140 1000 20.5 7.874 5.512 39.4 45.2 F3M200140

200 150 1000 18.0 7.874 5.906 39.4 39.5 F3M200150

200 160 1000 15.2 7.874 6.299 39.4 33.4 F3M200160

200 170 1000 12.2 7.874 6.693 39.4 26.9 F3M200170

200 180 1000 9.1 7.874 7.087 39.4 20.0 F3M200180

210 70 1000 37.4 8.268 2.756 39.4 82.2 F3M210070

210 80 1000 36.1 8.268 3.150 39.4 79.3 F3M210080

Page 6





Profile



Bearing

Outside

Diameter

(mm)

Bearing

Inside

Diameter

(mm)

Bearing

Length

(mm)

Approx.

Weight

(kg)

Bearing

Outside

Diameter

(inches)

Bearing

Inside

Diameter

(inches)

Bearing

Length

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Number

210 90 1000 34.6 8.268 3.543 39.4 76.0 F3M210090

210 100 1000 32.9 8.268 3.937 39.4 72.3 F3M210100

210 110 1000 31.0 8.268 4.331 39.4 68.2 F3M210110

210 120 1000 29.0 8.268 4.724 39.4 63.8 F3M210120

210 130 1000 26.8 8.268 5.118 39.4 58.9 F3M210130

210 140 1000 24.3 8.268 5.512 39.4 53.6 F3M210140

210 150 1000 21.8 8.268 5.906 39.4 47.9 F3M210150

210 160 1000 19.0 8.268 6.299 39.4 41.8 F3M210160

210 170 1000 16.0 8.268 6.693 39.4 35.3 F3M210170

210 180 1000 12.9 8.268 7.087 39.4 28.4 F3M210180

210 190 1000 9.6 8.268 7.480 39.4 21.0 F3M210190

220 80 1000 40.0 8.661 3.150 39.4 88.1 F3M220080

220 90 1000 38.5 8.661 3.543 39.4 84.8 F3M220090

220 100 1000 36.9 8.661 3.937 39.4 81.1 F3M220100

220 110 1000 35.0 8.661 4.331 39.4 77.0 F3M220110

220 120 1000 33.0 8.661 4.724 39.4 72.5 F3M220120

220 130 1000 30.7 8.661 5.118 39.4 67.6 F3M220130

220 140 1000 28.3 8.661 5.512 39.4 62.3 F3M220140

220 150 1000 25.7 8.661 5.906 39.4 56.6 F3M220150

220 160 1000 23.0 8.661 6.299 39.4 50.5 F3M220160

220 170 1000 20.0 8.661 6.693 39.4 44.0 F3M220170

220 180 1000 16.9 8.661 7.087 39.4 37.1 F3M220180

220 190 1000 13.5 8.661 7.480 39.4 29.8 F3M220190

220 200 1000 10.0 8.661 7.874 39.4 22.1 F3M220200

230 90 1000 42.7 9.055 3.543 39.4 94.0 F3M230090

230 100 1000 41.0 9.055 3.937 39.4 90.3 F3M230100

230 110 1000 39.2 9.055 4.331 39.4 86.2 F3M230110

230 120 1000 37.1 9.055 4.724 39.4 81.7 F3M230120

230 130 1000 34.9 9.055 5.118 39.4 76.8 F3M230130

230 140 1000 32.5 9.055 5.512 39.4 71.5 F3M230140

230 150 1000 29.9 9.055 5.906 39.4 65.8 F3M230150

230 160 1000 27.1 9.055 6.299 39.4 59.7 F3M230160

230 170 1000 24.2 9.055 6.693 39.4 53.2 F3M230170

230 180 1000 21.0 9.055 7.087 39.4 46.3 F3M230180

230 190 1000 17.7 9.055 7.480 39.4 39.0 F3M230190

Page 7







Profile

Bearing

Outside

Diameter

(mm)

Bearing

Inside

Diameter

(mm)

Bearing

Length

(mm)

Approx.

Weight

(kg)

Bearing

Outside

Diameter

(inches)

Bearing

Inside

Diameter

(inches)

Bearing

Length

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Number

230 200 1000 14.2 9.055 7.874 39.4 31.3 F3M230200

230 210 1000 10.5 9.055 8.268 39.4 23.2 F3M230210

240 100 1000 45.4 9.449 3.937 39.4 99.8 F3M240100

240 110 1000 43.5 9.449 4.331 39.4 95.7 F3M240110

240 120 1000 41.5 9.449 4.724 39.4 91.2 F3M240120

240 130 1000 39.2 9.449 5.118 39.4 86.3 F3M240130

240 140 1000 36.8 9.449 5.512 39.4 81.0 F3M240140

240 150 1000 34.2 9.449 5.906 39.4 75.3 F3M240150

240 160 1000 31.5 9.449 6.299 39.4 69.2 F3M240160

240 170 1000 28.5 9.449 6.693 39.4 62.7 F3M240170

240 180 1000 25.4 9.449 7.087 39.4 55.8 F3M240180

240 190 1000 22.1 9.449 7.480 39.4 48.5 F3M240190

240 200 1000 18.6 9.449 7.874 39.4 40.8 F3M240200

240 210 1000 14.9 9.449 8.268 39.4 32.7 F3M240210

240 220 1000 11.0 9.449 8.661 39.4 24.2 F3M240220

250 100 1000 49.9 9.843 3.937 39.4 109.8 F3M250100

250 110 1000 48.0 9.843 4.331 39.4 105.7 F3M250110

250 120 1000 46.0 9.843 4.724 39.4 101.2 F3M250120

250 130 1000 43.8 9.843 5.118 39.4 96.3 F3M250130

250 140 1000 41.4 9.843 5.512 39.4 91.0 F3M250140

250 150 1000 38.8 9.843 5.906 39.4 85.3 F3M250150

250 160 1000 36.0 9.843 6.299 39.4 79.2 F3M250160

250 170 1000 33.0 9.843 6.693 39.4 72.7 F3M250170

250 180 1000 29.9 9.843 7.087 39.4 65.8 F3M250180

250 190 1000 26.6 9.843 7.480 39.4 58.5 F3M250190

250 200 1000 23.1 9.843 7.874 39.4 50.8 F3M250200

250 210 1000 19.4 9.843 8.268 39.4 42.7 F3M250210

250 220 1000 15.5 9.843 8.661 39.4 34.2 F3M250220

250 230 1000 11.5 9.843 9.055 39.4 25.3 F3M250230

260 110 1000 52.8 10.236 4.331 39.4 116.1 F3M260110

260 120 1000 50.7 10.236 4.724 39.4 111.6 F3M260120

260 130 1000 48.5 10.236 5.118 39.4 106.7 F3M260130

260 140 1000 46.1 10.236 5.512 39.4 101.4 F3M260140

260 150 1000 43.5 10.236 5.906 39.4 95.7 F3M260150

260 160 1000 40.7 10.236 6.299 39.4 89.6 F3M260160

Page 8






Profile


Bearing

Outside

Diameter

(mm)

Bearing

Inside

Diameter

(mm)

Bearing

Length

(mm)

Approx.

Weight

(kg)

Bearing

Outside

Diameter

(inches)

Bearing

Inside

Diameter

(inches)

Bearing

Length

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Number

260 170 1000 37.8 10.236 6.693 39.4 83.1 F3M260170

260 180 1000 34.6 10.236 7.087 39.4 76.2 F3M260180

260 190 1000 31.3 10.236 7.480 39.4 68.9 F3M260190

260 200 1000 27.8 10.236 7.874 39.4 61.2 F3M260200

260 210 1000 24.1 10.236 8.268 39.4 53.0 F3M260210

260 220 1000 20.2 10.236 8.661 39.4 44.5 F3M260220

260 230 1000 16.2 10.236 9.055 39.4 35.6 F3M260230

260 240 1000 12.0 10.236 9.449 39.4 26.3 F3M260240

270 120 1000 55.6 10.630 4.724 39.4 122.3 F3M270120

270 130 1000 53.4 10.630 5.118 39.4 117.4 F3M270130

270 140 1000 51.0 10.630 5.512 39.4 112.1 F3M270140

270 150 1000 48.4 10.630 5.906 39.4 106.4 F3M270150

270 160 1000 45.6 10.630 6.299 39.4 100.3 F3M270160

270 170 1000 42.7 10.630 6.693 39.4 93.8 F3M270170

270 180 1000 39.5 10.630 7.087 39.4 86.9 F3M270180

270 190 1000 36.2 10.630 7.480 39.4 79.6 F3M270190

270 200 1000 32.7 10.630 7.874 39.4 71.9 F3M270200

270 210 1000 29.0 10.630 8.268 39.4 63.8 F3M270210

270 220 1000 25.1 10.630 8.661 39.4 55.3 F3M270220

270 230 1000 21.1 10.630 9.055 39.4 46.4 F3M270230

270 240 1000 16.9 10.630 9.449 39.4 37.1 F3M270240

270 250 1000 12.4 10.630 9.843 39.4 27.4 F3M270250

280 130 1000 58.5 11.024 5.118 39.4 128.6 F3M280130

280 140 1000 56.1 11.024 5.512 39.4 123.3 F3M280140

280 150 1000 53.5 11.024 5.906 39.4 117.6 F3M280150

280 160 1000 50.7 11.024 6.299 39.4 111.5 F3M280160

280 170 1000 47.7 11.024 6.693 39.4 105.0 F3M280170

280 180 1000 44.6 11.024 7.087 39.4 98.1 F3M280180

280 190 1000 41.3 11.024 7.480 39.4 90.8 F3M280190

280 200 1000 37.8 11.024 7.874 39.4 83.1 F3M280200

280 210 1000 34.1 11.024 8.268 39.4 75.0 F3M280210

280 220 1000 30.2 11.024 8.661 39.4 66.5 F3M280220

280 230 1000 26.2 11.024 9.055 39.4 57.6 F3M280230

280 240 1000 21.9 11.024 9.449 39.4 48.2 F3M280240

280 250 1000 17.5 11.024 9.843 39.4 38.5 F3M280250

Page 9







Profile

Bearing

Outside

Diameter

(mm)

Bearing

Inside

Diameter

(mm)

Bearing

Length

(mm)

Approx.

Weight

(kg)

Bearing

Outside

Diameter

(inches)

Bearing

Inside

Diameter

(inches)

Bearing

Length

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Number

280 260 1000 12.9 11.024 10.236 39.4 28.4 F3M280260

290 140 1000 61.3 11.417 5.512 39.4 134.9 F3M290140

290 150 1000 58.7 11.417 5.906 39.4 129.2 F3M290150

290 160 1000 55.9 11.417 6.299 39.4 123.1 F3M290160

290 170 1000 53.0 11.417 6.693 39.4 116.6 F3M290170

290 180 1000 49.9 11.417 7.087 39.4 109.7 F3M290180

290 190 1000 46.5 11.417 7.480 39.4 102.4 F3M290190

290 200 1000 43.0 11.417 7.874 39.4 94.7 F3M290200

290 210 1000 39.3 11.417 8.268 39.4 86.6 F3M290210

290 220 1000 35.5 11.417 8.661 39.4 78.0 F3M290220

290 230 1000 31.4 11.417 9.055 39.4 69.1 F3M290230

290 240 1000 27.2 11.417 9.449 39.4 59.8 F3M290240

290 250 1000 22.8 11.417 9.843 39.4 50.1 F3M290250

290 260 1000 18.2 11.417 10.236 39.4 40.0 F3M290260

290 270 1000 13.4 11.417 10.630 39.4 29.5 F3M290270

300 150 1000 64.2 11.811 5.906 39.4 141.2 F3M300150

300 160 1000 61.4 11.811 6.299 39.4 135.1 F3M300160

300 170 1000 58.4 11.811 6.693 39.4 128.6 F3M300170

300 180 1000 55.3 11.811 7.087 39.4 121.6 F3M300180

300 190 1000 52.0 11.811 7.480 39.4 114.3 F3M300190

300 200 1000 48.5 11.811 7.874 39.4 106.6 F3M300200

300 210 1000 44.8 11.811 8.268 39.4 98.5 F3M300210

300 220 1000 40.9 11.811 8.661 39.4 90.0 F3M300220

300 230 1000 36.9 11.811 9.055 39.4 81.1 F3M300230

300 240 1000 32.6 11.811 9.449 39.4 71.8 F3M300240

300 250 1000 28.2 11.811 9.843 39.4 62.1 F3M300250

300 260 1000 23.6 11.811 10.236 39.4 52.0 F3M300260

300 270 1000 18.8 11.811 10.630 39.4 41.4 F3M300270

300 280 1000 13.9 11.811 11.024 39.4 30.5 F3M300280

Page 10

NOTESAll tubes are supplied rough molded with sufficient overbuild and underbuild to machine to sizes indicated.


SXL STRATEGIC STOCK‘RS’ SeriesMarine Applications (rudder bearings, fairleads, winches, etc.)

- Grease-free, low operating coefficient of friction, highabrasion resistance, rudder bearings approved to designpressures up to 12 N/mm2, easily machined


- Dry start-up capability, grease-free, low dry coefficient of friction, high abrasion resistance, temperature limits

of 100°C (212°F) dry and 60°C (140°F) in water, pH range of 5-10

Profile

Bearing

Outside

Diameter

(mm)

Bearing

Inside

Diameter

(mm)

Bearing

Length

(mm)

Approx.

Weight

(kg)

Bearing

Outside

Diameter

(inches)

Bearing

Inside

Diameter

(inches)

Bearing

Length

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Number

420 350 482 30 16 1/2 13 13/16 19 65 F113RS350

430 360 494 31 16 15/16 14 3/16 19 7/16 69 F113RS360

440 370 506 33 17 5/16 14 9/16 19 15/16 72 F113RS370

450 380 518 34 17 11/16 15 20 3/8 76 F113RS380

460 390 530 36 18 1/16 15 3/8 20 7/8 79 F113RS390

470 400 542 38 18 1/2 15 3/4 21 5/16 83 F113RS400

480 410 554 39 18 7/8 16 3/16 21 13/16 87 F113RS410

490 420 566 41 19 1/4 16 9/16 22 5/16 91 F113RS420

500 430 578 43 19 11/16 16 15/16 22 3/4 95 F113RS430

520 440 590 51 20 7/16 17 5/16 23 1/4 112 F113RS440

530 450 602 53 20 7/8 17 3/4 23 11/16 116 F113RS450

540 460 614 55 21 1/4 18 1/8 24 3/16 121 F113RS460

550 470 626 57 21 17/26 18 1/2 24 5/8 126 F113RS470

560 480 638 59 22 18 15/16 25 1/8 131 F113RS480

570 490 650 62 22 7/16 19 5/16 25 9/16 136 F113RS490

580 500 662 64 22 13/16 19 11/16 26 1/16 141 F113RS500

590 510 674 66 23 3/16 20 1/8 26 9/16 146 F113RS510

600 520 686 69 23 5/8 20 1/2 27 151 F113RS520

610 530 698 71 24 20 7/8 27 1/2 157 F113RS530

620 540 710 74 24 3/8 21 1/4 27 15/16 162 F113RS540

630 550 722 76 24 13/16 21 11/16 28 7/16 168 F113RS550

650 560 734 88 25 9/16 22 1/16 28 7/8 193 F113RS560

660 570 746 91 25 15/16 22 7/16 29 3/8 200 F113RS570

670 580 758 94 26 3/8 22 7/8 29 13/16 206 F113RS580

680 590 770 97 26 3/4 23 1/4 30 5/16 213 F113RS590

690 600 782 100 27 1/8 23 5/8 30 13/16 220 F113RS600

700 610 794 103 27 9/16 24 1/16 31 1/4 227 F113RS610

710 620 806 106 27 15/16 24 7/16 31 3/4 233 F113RS620

720 630 818 109 28 5/16 24 13/16 32 3/16 241 F113RS630

730 640 830 112 28 3/4 25 3/16 32 11/16 248 F113RS640

740 650 842 116 29 1/8 25 5/8 33 1/8 255 F113RS650

750 660 854 119 29 1/2 26 33 5/8 262 F113RS660

770 670 866 135 30 5/16 26 3/8 34 1/8 298 F113RS670

780 680 878 139 30 11/16 26 13/16 34 9/16 306 F113RS680

790 690 890 143 31 1/16 27 3/16 35 1/16 314 F113RS690

800 700 902 147 31 1/2 27 9/16 35 1/2 323 F113RS700

810 710 914 150 31 7/8 28 36 332 F113RS710

820 720 926 154 32 1/4 28 3/8 36 7/16 340 F113RS720

Page 11

NOTESAll tubes are supplied rough molded with sufficient overbuild and underbuild to machine to sizes indicated.


SXL STRATEGIC STOCK‘RS’ SeriesMarine Applications (rudder bearings, fairleads, winches, etc.)

- Grease-free, low operating coefficient of friction, highabrasion resistance, rudder bearings approved to designpressures up to 12 N/mm2, easily machined


- Dry start-up capability, grease-free, low dry coefficient of friction, high abrasion resistance, temperature limits

of 100°C (212°F) dry and 60°C (140°F) in water, pH range of 5-10

SXL STRATEGIC STOCK- ‘R’ Series

Profile

Bearing

Outside

Diameter

(mm)

Bearing

Inside

Diameter

(mm)

Bearing

Length

(mm)

Approx.

Weight

(kg)

Bearing

Outside

Diameter

(inches)

Bearing

Inside

Diameter

(inches)

Bearing

Length

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Number

830 730 938 158 32 5/8 28 3/4 36 15/16 349 F113RS730

840 740 950 163 33 1/16 29 1/8 37 3/8 358 F113RS740

850 750 962 167 33 7/16 29 9/16 37 7/8 368 F113RS750

860 760 974 171 33 13/16 29 15/16 38 3/8 377 F113RS760

870 770 986 175 34 1/4 30 5/16 38 13/16 386 F113RS770

880 780 998 179 34 5/8 30 3/4 39 5/16 396 F113RS780

900 790 1010 201 35 7/16 31 1/8 39 3/4 443 F113RS790

910 800 1022 206 35 13/16 31 1/2 40 1/4 454 F113RS800

Bearing

Outside

Diameter

(mm)

Bearing

Inside

Diameter

(mm)

Bearing

Length

(mm)

Approx.

Weight

(kg)

Bearing

Outside

Diameter

(inches)

Bearing

Inside

Diameter

(inches)

Bearing

Length

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Number

365 265 440 29.0 14 5/16 10 3/8 17 5/16 63.8 F113R300

365 280 500 28.0 14 5/16 11 19 5/8 61.6 F113R310

365 315 500 18.0 14 5/16 12 3/8 19 5/8 39.6 F113R320

400 315 550 34.0 15 11/16 12 3/8 21 5/8 74.8 F113R330

400 350 550 22.0 15 11/16 13 11/16 21 5/8 48.4 F113R340

425 315 500 40.0 16 11/16 12 3/8 19 5/8 88.0 F113R350

485 365 560 56.0 19 14 5/16 22 123.2 F113R400

485 395 650 52.0 19 15 1/2 25 1/2 114.4 F113R410

510 430 700 54.0 20 16 7/8 27 1/2 118.8 F113R420

510 460 700 37.0 20 18 1/8 27 1/2 81.4 F113R430

535 415 620 70.0 21 16 5/16 24 3/8 154.0 F113R450

585 465 680 84.0 23 18 5/16 26 11/16 184.8 F113R500

635 515 740 100.0 25 20 3/16 29 1/8 220.0 F113R550

635 565 740 65.0 25 22 3/16 29 1/8 143.0 F113R560

685 565 800 116.0 26 7/8 22 3/16 31 3/8 255.2 F113R600

685 600 800 90.0 26 7/8 23 5/8 31 3/8 198.0 F113R610

735 615 840 135.0 28 7/8 24 3/16 33 297.0 F113R650

735 650 800 104.0 28 7/8 25 1/2 31 3/8 228.8 F113R660

795 665 920 170.0 31 3/16 26 1/8 36 3/16 374.0 F113R700

845 715 980 194.0 33 3/16 28 1/8 38 1/2 426.8 F113R750

895 765 1040 218.0 35 3/16 30 1/8 40 7/8 479.6 F113R800

955 815 1100 264.0 37 1/2 32 43 5/16 580.8 F113R850

1005 865 1160 296.0 39 1/2 34 45 5/8 651.2 F113R900

Page 12



XL METRE LONG TUBESMarine Applications (propeller shaft bearings)

- Water-lubricated, grease-free, low operating coefficient offriction, good abrasion resistance, good wear life, easily machined

Industrial Applications (pump bearings) - Low dry coefficient of friction, grease-free, good abrasion resistance, temperature limits of 100°C (212°F) dryand 60°C (140°F) in water, pH range of 5-10

Profile

Bearing

Outside

Diameter

(mm)

Bearing

Inside

Diameter

(mm)

Bearing

Length

(mm)

Approx.

Weight

(kg)

Bearing

Outside

Diameter

(inches)

Bearing

Inside

Diameter

(inches)

Bearing

Length

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Number

40 20 1000 1.5 1.575 0.787 39.4 3.3 F2M040020

50 20 1000 2.4 1.969 0.787 39.4 5.3 F2M050020

50 30 1000 2.0 1.969 1.181 39.4 4.4 F2M050030

60 20 1000 3.5 2.362 0.787 39.4 7.8 F2M060020

60 30 1000 3.1 2.362 1.181 39.4 6.8 F2M060030

60 40 1000 2.5 2.362 1.575 39.4 5.5 F2M060040

70 20 1000 4.8 2.756 0.787 39.4 10.6 F2M070020

70 30 1000 4.4 2.756 1.181 39.4 9.7 F2M070030

70 40 1000 3.8 2.756 1.575 39.4 8.4 F2M070040

70 50 1000 3.0 2.756 1.969 39.4 6.6 F2M070050

80 20 1000 6.3 3.150 0.787 39.4 13.9 F2M080020

80 30 1000 5.9 3.150 1.181 39.4 13.0 F2M080030

80 40 1000 5.3 3.150 1.575 39.4 11.6 F2M080040

80 50 1000 4.5 3.150 1.969 39.4 9.9 F2M080050

80 60 1000 3.5 3.150 2.362 39.4 7.7 F2M080060

90 20 1000 8.0 3.543 0.787 39.4 17.6 F2M090020

90 30 1000 7.6 3.543 1.181 39.4 16.7 F2M090030

90 40 1000 7.0 3.543 1.575 39.4 15.3 F2M090040

90 50 1000 6.2 3.543 1.969 39.4 13.6 F2M090050

90 60 1000 5.2 3.543 2.362 39.4 11.4 F2M090060

90 70 1000 4.0 3.543 2.756 39.4 8.8 F2M090070

100 20 1000 9.9 3.937 0.787 39.4 21.7 F2M100020

100 30 1000 9.5 3.937 1.181 39.4 20.8 F2M100030

100 40 1000 8.8 3.937 1.575 39.4 19.5 F2M100040

100 50 1000 8.0 3.937 1.969 39.4 17.7 F2M100050

100 60 1000 7.1 3.937 2.362 39.4 15.5 F2M100060

100 70 1000 5.9 3.937 2.756 39.4 12.9 F2M100070

100 80 1000 4.5 3.937 3.150 39.4 9.9 F2M100080

110 20 1000 11.9 4.331 0.787 39.4 26.3 F2M110020

110 30 1000 11.5 4.331 1.181 39.4 25.3 F2M110030

110 40 1000 10.9 4.331 1.575 39.4 24.0 F2M110040

110 50 1000 10.1 4.331 1.969 39.4 22.2 F2M110050

110 60 1000 9.1 4.331 2.362 39.4 20.1 F2M110060

110 70 1000 7.9 4.331 2.756 39.4 17.5 F2M110070

110 80 1000 6.6 4.331 3.150 39.4 14.4 F2M110080

Page 13





Industrial Applications (pump bearings)

- Low dry coefficient of friction, grease-free, good abrasion resistance, temperature limits of 100°C (212°F) dryand 60°C (140°F) in water, pH range of 5-10

Profile

Bearing

Outside

Diameter

(mm)

Bearing

Inside

Diameter

(mm)

Bearing

Length

(mm)

Approx.

Weight

(kg)

Bearing

Outside

Diameter

(inches)

Bearing

Inside

Diameter

(inches)

Bearing

Length

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Number

110 90 1000 5.0 4.331 3.543 39.4 11.0 F2M110090

120 20 1000 14.2 4.724 0.787 39.4 31.2 F2M120020

120 30 1000 13.8 4.724 1.181 39.4 30.3 F2M120030

120 40 1000 13.2 4.724 1.575 39.4 29.0 F2M120040

120 50 1000 12.4 4.724 1.969 39.4 27.2 F2M120050

120 60 1000 11.4 4.724 2.362 39.4 25.0 F2M120060

120 70 1000 10.2 4.724 2.756 39.4 22.4 F2M120070

120 80 1000 8.8 4.724 3.150 39.4 19.4 F2M120080

120 90 1000 7.3 4.724 3.543 39.4 16.0 F2M120090

120 100 1000 5.5 4.724 3.937 39.4 12.1 F2M120100

130 20 1000 16.6 5.118 0.787 39.4 36.6 F2M130020

130 30 1000 16.2 5.118 1.181 39.4 35.7 F2M130030

130 40 1000 15.6 5.118 1.575 39.4 34.3 F2M130040

130 50 1000 14.8 5.118 1.969 39.4 32.6 F2M130050

130 60 1000 13.8 5.118 2.362 39.4 30.4 F2M130060

130 70 1000 12.6 5.118 2.756 39.4 27.8 F2M130070

130 80 1000 11.3 5.118 3.150 39.4 24.8 F2M130080

130 90 1000 9.7 5.118 3.543 39.4 21.3 F2M130090

130 100 1000 7.9 5.118 3.937 39.4 17.5 F2M130100

130 110 1000 6.0 5.118 4.331 39.4 13.2 F2M130110

140 20 1000 19.3 5.512 0.787 39.4 42.4 F2M140020

140 30 1000 18.8 5.512 1.181 39.4 41.5 F2M140030

140 40 1000 18.2 5.512 1.575 39.4 40.1 F2M140040

140 50 1000 17.4 5.512 1.969 39.4 38.4 F2M140050

140 60 1000 16.5 5.512 2.362 39.4 36.2 F2M140060

140 70 1000 15.3 5.512 2.756 39.4 33.6 F2M140070

140 80 1000 13.9 5.512 3.150 39.4 30.6 F2M140080

140 90 1000 12.3 5.512 3.543 39.4 27.1 F2M140090

140 100 1000 10.6 5.512 3.937 39.4 23.3 F2M140100

140 110 1000 8.6 5.512 4.331 39.4 19.0 F2M140110

140 120 1000 6.5 5.512 4.724 39.4 14.3 F2M140120

150 20 1000 22.1 5.906 0.787 39.4 48.6 F2M150020

150 30 1000 21.7 5.906 1.181 39.4 47.7 F2M150030

150 40 1000 21.1 5.906 1.575 39.4 46.3 F2M150040

150 50 1000 20.3 5.906 1.969 39.4 44.6 F2M150050

Page 14Effective: January 01, 2016Supersedes: January 01, 2015






Profile

Bearing

Outside

Diameter

(mm)

Bearing

Inside

Diameter

(mm)

Bearing

Length

(mm)

Approx.

Weight

(kg)

Bearing

Outside

Diameter

(inches)

Bearing

Inside

Diameter

(inches)

Bearing

Length

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Number

150 60 1000 19.3 5.906 2.362 39.4 42.4 F2M150060

150 70 1000 18.1 5.906 2.756 39.4 39.8 F2M150070

150 80 1000 16.7 5.906 3.150 39.4 36.8 F2M150080

150 90 1000 15.2 5.906 3.543 39.4 33.4 F2M150090

150 100 1000 13.4 5.906 3.937 39.4 29.5 F2M150100

150 110 1000 11.5 5.906 4.331 39.4 25.2 F2M150110

150 120 1000 9.3 5.906 4.724 39.4 20.5 F2M150120

150 130 1000 7.0 5.906 5.118 39.4 15.4 F2M150130

160 30 1000 24.7 6.299 1.181 39.4 54.3 F2M160030

160 40 1000 24.1 6.299 1.575 39.4 53.0 F2M160040

160 50 1000 23.3 6.299 1.969 39.4 51.2 F2M160050

160 60 1000 22.3 6.299 2.362 39.4 49.0 F2M160060

160 70 1000 21.1 6.299 2.756 39.4 46.4 F2M160070

160 80 1000 19.7 6.299 3.150 39.4 43.4 F2M160080

160 90 1000 18.2 6.299 3.543 39.4 40.0 F2M160090

160 100 1000 16.4 6.299 3.937 39.4 36.1 F2M160100

160 110 1000 14.5 6.299 4.331 39.4 31.9 F2M160110

160 120 1000 12.3 6.299 4.724 39.4 27.2 F2M160120

160 130 1000 10.0 6.299 5.118 39.4 22.0 F2M160130

160 140 1000 7.5 6.299 5.512 39.4 16.5 F2M160140

170 40 1000 27.3 6.693 1.575 39.4 60.0 F2M170040

170 50 1000 26.5 6.693 1.969 39.4 58.3 F2M170050

170 60 1000 25.5 6.693 2.362 39.4 56.1 F2M170060

170 70 1000 24.3 6.693 2.756 39.4 53.5 F2M170070

170 80 1000 22.9 6.693 3.150 39.4 50.5 F2M170080

170 90 1000 21.4 6.693 3.543 39.4 47.0 F2M170090

170 100 1000 19.6 6.693 3.937 39.4 43.2 F2M170100

170 110 1000 17.7 6.693 4.331 39.4 38.9 F2M170110

170 120 1000 15.6 6.693 4.724 39.4 34.2 F2M170120

170 130 1000 13.2 6.693 5.118 39.4 29.1 F2M170130

170 140 1000 10.7 6.693 5.512 39.4 23.6 F2M170140

170 150 1000 8.0 6.693 5.906 39.4 17.6 F2M170150

180 50 1000 29.9 7.087 1.969 39.4 65.8 F2M180050

180 60 1000 28.9 7.087 2.362 39.4 63.6 F2M180060

180 70 1000 27.7 7.087 2.756 39.4 61.0 F2M180070

Page 15







Profile

Bearing

Outside

Diameter

(mm)

Bearing

Inside

Diameter

(mm)

Bearing

Length

(mm)

Approx.

Weight

(kg)

Bearing

Outside

Diameter

(inches)

Bearing

Inside

Diameter

(inches)

Bearing

Length

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Number

180 80 1000 26.3 7.087 3.150 39.4 58.0 F2M180080

180 90 1000 24.8 7.087 3.543 39.4 54.5 F2M180090

180 100 1000 23.0 7.087 3.937 39.4 50.7 F2M180100

180 110 1000 21.1 7.087 4.331 39.4 46.4 F2M180110

180 120 1000 19.0 7.087 4.724 39.4 41.7 F2M180120

180 130 1000 16.6 7.087 5.118 39.4 36.6 F2M180130

180 140 1000 14.1 7.087 5.512 39.4 31.0 F2M180140

180 150 1000 11.4 7.087 5.906 39.4 25.1 F2M180150

180 160 1000 8.5 7.087 6.299 39.4 18.7 F2M180160

190 60 1000 32.5 7.480 2.362 39.4 71.5 F2M190060

190 70 1000 31.3 7.480 2.756 39.4 68.9 F2M190070

190 80 1000 29.9 7.480 3.150 39.4 65.9 F2M190080

190 90 1000 28.4 7.480 3.543 39.4 62.4 F2M190090

190 100 1000 26.6 7.480 3.937 39.4 58.6 F2M190100

190 110 1000 24.7 7.480 4.331 39.4 54.3 F2M190110

190 120 1000 22.5 7.480 4.724 39.4 49.6 F2M190120

190 130 1000 20.2 7.480 5.118 39.4 44.5 F2M190130

190 140 1000 17.7 7.480 5.512 39.4 38.9 F2M190140

190 150 1000 15.0 7.480 5.906 39.4 33.0 F2M190150

190 160 1000 12.1 7.480 6.299 39.4 26.6 F2M190160

190 170 1000 9.0 7.480 6.693 39.4 19.8 F2M190170

200 70 1000 35.1 7.874 2.756 39.4 77.2 F2M200070

200 80 1000 33.7 7.874 3.150 39.4 74.2 F2M200080

200 90 1000 32.2 7.874 3.543 39.4 70.7 F2M200090

200 100 1000 30.4 7.874 3.937 39.4 66.9 F2M200100

200 110 1000 28.5 7.874 4.331 39.4 62.6 F2M200110

200 120 1000 26.3 7.874 4.724 39.4 57.9 F2M200120

200 130 1000 24.0 7.874 5.118 39.4 52.8 F2M200130

200 140 1000 21.5 7.874 5.512 39.4 47.2 F2M200140

200 150 1000 18.8 7.874 5.906 39.4 41.3 F2M200150

200 160 1000 15.9 7.874 6.299 39.4 34.9 F2M200160

200 170 1000 12.8 7.874 6.693 39.4 28.1 F2M200170

200 180 1000 9.5 7.874 7.087 39.4 20.9 F2M200180

210 70 1000 39.1 8.268 2.756 39.4 85.9 F2M210070

210 80 1000 37.7 8.268 3.150 39.4 82.9 F2M210080

Page 16







Profile

Bearing

Outside

Diameter

(mm)

Bearing

Inside

Diameter

(mm)

Bearing Length

(mm)

Approx.

Weight

(kg)

Bearing

Outside

Diameter

(inches)

Bearing

Inside

Diameter

(inches)

Bearing

Length

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Number

210 90 1000 36.1 8.268 3.543 39.4 79.5 F2M210090

210 100 1000 34.4 8.268 3.937 39.4 75.6 F2M210100

210 110 1000 32.4 8.268 4.331 39.4 71.3 F2M210110

210 120 1000 30.3 8.268 4.724 39.4 66.6 F2M210120

210 130 1000 28.0 8.268 5.118 39.4 61.5 F2M210130

210 140 1000 25.4 8.268 5.512 39.4 56.0 F2M210140

210 150 1000 22.7 8.268 5.906 39.4 50.0 F2M210150

210 160 1000 19.8 8.268 6.299 39.4 43.7 F2M210160

210 170 1000 16.8 8.268 6.693 39.4 36.9 F2M210170

210 180 1000 13.5 8.268 7.087 39.4 29.6 F2M210180

210 190 1000 10.0 8.268 7.480 39.4 22.0 F2M210190

220 80 1000 41.9 8.661 3.150 39.4 92.1 F2M220080

220 90 1000 40.3 8.661 3.543 39.4 88.6 F2M220090

220 100 1000 38.5 8.661 3.937 39.4 84.8 F2M220100

220 110 1000 36.6 8.661 4.331 39.4 80.5 F2M220110

220 120 1000 34.5 8.661 4.724 39.4 75.8 F2M220120

220 130 1000 32.1 8.661 5.118 39.4 70.7 F2M220130

220 140 1000 29.6 8.661 5.512 39.4 65.1 F2M220140

220 150 1000 26.9 8.661 5.906 39.4 59.2 F2M220150

220 160 1000 24.0 8.661 6.299 39.4 52.8 F2M220160

220 170 1000 20.9 8.661 6.693 39.4 46.0 F2M220170

220 180 1000 17.6 8.661 7.087 39.4 38.8 F2M220180

220 190 1000 14.2 8.661 7.480 39.4 31.2 F2M220190

220 200 1000 10.5 8.661 7.874 39.4 23.1 F2M220200

230 90 1000 44.6 9.055 3.543 39.4 98.2 F2M230090

230 100 1000 42.9 9.055 3.937 39.4 94.4 F2M230100

230 110 1000 40.9 9.055 4.331 39.4 90.1 F2M230110

230 120 1000 38.8 9.055 4.724 39.4 85.4 F2M230120

230 130 1000 36.5 9.055 5.118 39.4 80.3 F2M230130

230 140 1000 34.0 9.055 5.512 39.4 74.7 F2M230140

230 150 1000 31.3 9.055 5.906 39.4 68.8 F2M230150

230 160 1000 28.4 9.055 6.299 39.4 62.4 F2M230160

230 170 1000 25.3 9.055 6.693 39.4 55.6 F2M230170

230 180 1000 22.0 9.055 7.087 39.4 48.4 F2M230180

230 190 1000 18.5 9.055 7.480 39.4 40.7 F2M230190

Page 17







Profile

Bearing

Outside

Diameter

(mm)

Bearing

Inside

Diameter

(mm)

Bearing Length

(mm)

Approx.

Weight

(kg)

Bearing

Outside

Diameter (inch-

es)

Bearing Inside

Diameter

(inches)

Bearing

Length

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Number

230 200 1000 14.9 9.055 7.874 39.4 32.7 F2M230200

230 210 1000 11.0 9.055 8.268 39.4 24.2 F2M230210

240 100 1000 47.4 9.449 3.937 39.4 104.3 F2M240100

240 110 1000 45.5 9.449 4.331 39.4 100.1 F2M240110

240 120 1000 43.4 9.449 4.724 39.4 95.4 F2M240120

240 130 1000 41.0 9.449 5.118 39.4 90.3 F2M240130

240 140 1000 38.5 9.449 5.512 39.4 84.7 F2M240140

240 150 1000 35.8 9.449 5.906 39.4 78.8 F2M240150

240 160 1000 32.9 9.449 6.299 39.4 72.4 F2M240160

240 170 1000 29.8 9.449 6.693 39.4 65.6 F2M240170

240 180 1000 26.5 9.449 7.087 39.4 58.4 F2M240180

240 190 1000 23.1 9.449 7.480 39.4 50.7 F2M240190

240 200 1000 19.4 9.449 7.874 39.4 42.7 F2M240200

240 210 1000 15.5 9.449 8.268 39.4 34.2 F2M240210

240 220 1000 11.5 9.449 8.661 39.4 25.3 F2M240220

250 100 1000 52.2 9.843 3.937 39.4 114.8 F2M250100

250 110 1000 50.2 9.843 4.331 39.4 110.5 F2M250110

250 120 1000 48.1 9.843 4.724 39.4 105.8 F2M250120

250 130 1000 45.8 9.843 5.118 39.4 100.7 F2M250130

250 140 1000 43.2 9.843 5.512 39.4 95.1 F2M250140

250 150 1000 40.5 9.843 5.906 39.4 89.2 F2M250150

250 160 1000 37.6 9.843 6.299 39.4 82.8 F2M250160

250 170 1000 34.5 9.843 6.693 39.4 76.0 F2M250170

250 180 1000 31.3 9.843 7.087 39.4 68.8 F2M250180

250 190 1000 27.8 9.843 7.480 39.4 61.1 F2M250190

250 200 1000 24.1 9.843 7.874 39.4 53.1 F2M250200

250 210 1000 20.3 9.843 8.268 39.4 44.6 F2M250210

250 220 1000 16.2 9.843 8.661 39.4 35.7 F2M250220

250 230 1000 12.0 9.843 9.055 39.4 26.4 F2M250230

260 110 1000 55.1 10.236 4.331 39.4 121.3 F2M260110

260 120 1000 53.0 10.236 4.724 39.4 116.6 F2M260120

260 130 1000 50.7 10.236 5.118 39.4 111.5 F2M260130

260 140 1000 48.2 10.236 5.512 39.4 106.0 F2M260140

260 150 1000 45.5 10.236 5.906 39.4 100.0 F2M260150

260 160 1000 42.6 10.236 6.299 39.4 93.6 F2M260160

Page 18







Profile

Bearing

Outside

Diameter

(mm)

Bearing

Inside

Diameter

(mm)

Bearing Length

(mm)

Approx.

Weight

(kg)

Bearing

Outside

Diameter

(inches)

Bearing

Inside

Diameter

(inches)

Bearing

Length

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Number

260 170 1000 39.5 10.236 6.693 39.4 86.8 F2M260170

260 180 1000 36.2 10.236 7.087 39.4 79.6 F2M260180

260 190 1000 32.7 10.236 7.480 39.4 72.0 F2M260190

260 200 1000 29.1 10.236 7.874 39.4 63.9 F2M260200

260 210 1000 25.2 10.236 8.268 39.4 55.4 F2M260210

260 220 1000 21.2 10.236 8.661 39.4 46.6 F2M260220

260 230 1000 16.9 10.236 9.055 39.4 37.2 F2M260230

260 240 1000 12.5 10.236 9.449 39.4 27.5 F2M260240

270 120 1000 58.1 10.630 4.724 39.4 127.9 F2M270120

270 130 1000 55.8 10.630 5.118 39.4 122.8 F2M270130

270 140 1000 53.3 10.630 5.512 39.4 117.2 F2M270140

270 150 1000 50.6 10.630 5.906 39.4 111.3 F2M270150

270 160 1000 47.7 10.630 6.299 39.4 104.9 F2M270160

270 170 1000 44.6 10.630 6.693 39.4 98.1 F2M270170

270 180 1000 41.3 10.630 7.087 39.4 90.9 F2M270180

270 190 1000 37.8 10.630 7.480 39.4 83.2 F2M270190

270 200 1000 34.2 10.630 7.874 39.4 75.2 F2M270200

270 210 1000 30.3 10.630 8.268 39.4 66.7 F2M270210

270 220 1000 26.3 10.630 8.661 39.4 57.8 F2M270220

270 230 1000 22.0 10.630 9.055 39.4 48.5 F2M270230

270 240 1000 17.6 10.630 9.449 39.4 38.8 F2M270240

270 250 1000 13.0 10.630 9.843 39.4 28.6 F2M270250

280 130 1000 61.1 11.024 5.118 39.4 134.4 F2M280130

280 140 1000 58.6 11.024 5.512 39.4 128.9 F2M280140

280 150 1000 55.9 11.024 5.906 39.4 122.9 F2M280150

280 160 1000 53.0 11.024 6.299 39.4 116.6 F2M280160

280 170 1000 49.9 11.024 6.693 39.4 109.8 F2M280170

280 180 1000 46.6 11.024 7.087 39.4 102.6 F2M280180

280 190 1000 43.1 11.024 7.480 39.4 94.9 F2M280190

280 200 1000 39.5 11.024 7.874 39.4 86.9 F2M280200

280 210 1000 35.6 11.024 8.268 39.4 78.4 F2M280210

280 220 1000 31.6 11.024 8.661 39.4 69.5 F2M280220

280 230 1000 27.3 11.024 9.055 39.4 60.2 F2M280230

280 240 1000 22.9 11.024 9.449 39.4 50.4 F2M280240

280 250 1000 18.3 11.024 9.843 39.4 40.3 F2M280250

Page 19







Profile

Bearing

Outside

Diameter

(mm)

Bearing

Inside

Diameter

(mm)

Bearing Length

(mm)

Approx.

Weight

(kg)

Bearing

Outside

Diameter

(inches)

Bearing

Inside

Diameter

(inches)

Bearing

Length

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Number

280 260 1000 13.5 11.024 10.236 39.4 29.7 F2M280260

290 140 1000 64.1 11.417 5.512 39.4 141.0 F2M290140

290 150 1000 61.4 11.417 5.906 39.4 135.0 F2M290150

290 160 1000 58.5 11.417 6.299 39.4 128.7 F2M290160

290 170 1000 55.4 11.417 6.693 39.4 121.9 F2M290170

290 180 1000 52.1 11.417 7.087 39.4 114.6 F2M290180

290 190 1000 48.6 11.417 7.480 39.4 107.0 F2M290190

290 200 1000 45.0 11.417 7.874 39.4 99.0 F2M290200

290 210 1000 41.1 11.417 8.268 39.4 90.5 F2M290210

290 220 1000 37.1 11.417 8.661 39.4 81.6 F2M290220

290 230 1000 32.8 11.417 9.055 39.4 72.3 F2M290230

290 240 1000 28.4 11.417 9.449 39.4 62.5 F2M290240

290 250 1000 23.8 11.417 9.843 39.4 52.4 F2M290250

290 260 1000 19.0 11.417 10.236 39.4 41.8 F2M290260

290 270 1000 14.0 11.417 10.630 39.4 30.8 F2M290270

300 150 1000 67.1 11.811 5.906 39.4 147.6 F2M300150

300 160 1000 64.2 11.811 6.299 39.4 141.2 F2M300160

300 170 1000 61.1 11.811 6.693 39.4 134.4 F2M300170

300 180 1000 57.8 11.811 7.087 39.4 127.2 F2M300180

300 190 1000 54.3 11.811 7.480 39.4 119.5 F2M300190

300 200 1000 50.7 11.811 7.874 39.4 111.5 F2M300200

300 210 1000 46.8 11.811 8.268 39.4 103.0 F2M300210

300 220 1000 42.8 11.811 8.661 39.4 94.1 F2M300220

300 230 1000 38.5 11.811 9.055 39.4 84.8 F2M300230

300 240 1000 34.1 11.811 9.449 39.4 75.0 F2M300240

300 250 1000 29.5 11.811 9.843 39.4 64.9 F2M300250

300 260 1000 24.7 11.811 10.236 39.4 54.3 F2M300260

300 270 1000 19.7 11.811 10.630 39.4 43.3 F2M300270

300 280 1000 14.5 11.811 11.024 39.4 31.9 F2M300280

Page 20

NOTES [*A rough molded bearing part can satisfy a range of bearing sizes]Fully grooved tubes are supplied rough molded with lubrication grooves to suit the above shaft and housing diameters. All sizesare nominal. Please use the Thordon Bearing Sizing Calculation Program for sizing and to ensure the fully grooved tube can bemachined with adequate lubrication grooves depth.


SXL FULLY GROOVED BEARINGSMarine Applications (propeller shaft bearings)

- Water-lubricated, low operating coefficient of friction forreduced break-away torque, high abrasion resistance,excellent wear life, easily machined


- Dry start-up capability, grease-free, low dry coefficient offriction, high abrasion resistance, temperature limits of 60°C(140°F), pH range of 5-10

Profile

Housing

Diameter

(mm)

Shaft

Diameter

(mm)

Housing

Length

(mm)

Groove

Diameter

(mm)

Approx.

Weight

(kg)

Housing

Diameter

(inches)

Shaft

Diameter

(inches)

Housing

Length

(inches)

Groove

Diameter

(inches)

Approx.

Weight

(lbs.)

Thordon

Part

Number*

32 19 76 24.9 0.1 1 1/4 3/4 3 0.981 0.2 F31002

32 22 89 25.8 0.1 1 1/4 7/8 3 1/2 1.015 0.2 F31004

32 25 76 27.5 0.1 1 1/4 1 3 1.081 0.1 F31010

32 25 102 28.2 0.1 1 1/4 1 4 1.109 0.2 F31012

35 22 89 27.4 0.1 1 3/8 7/8 3 1/2 1.080 0.2 F31006

35 25 102 30.0 0.1 1 3/8 1 4 1.180 0.2 F31014

38 22 89 27.6 0.1 1 1/2 7/8 3 1/2 1.086 0.3 F31008

38 25 102 31.7 0.1 1 1/2 1 4 1.250 0.3 F31016

38 29 114 33.8 0.1 1 1/2 1 1/8 4 1/2 1.330 0.3 F31022

38 32 127 35.1 0.1 1 1/2 1 1/4 5 1.381 0.2 F31030

41 25 102 31.9 0.2 1 5/8 1 4 1.255 0.3 F31018

41 29 114 34.9 0.2 1 5/8 1 1/8 4 1/2 1.373 0.3 F31024

44 29 114 36.6 0.2 1 3/4 1 1/8 4 1/2 1.441 0.4 F31026

44 32 127 38.3 0.2 1 3/4 1 1/4 5 1.506 0.4 F31032

48 35 140 41.3 0.2 1 7/8 1 3/8 5 1/2 1.627 0.5 F31038

51 25 102 32.3 0.2 2 1 4 1.270 0.5 F31020

51 29 114 38.4 0.3 2 1 1/8 4 1/2 1.513 0.6 F31028

51 32 127 41.3 0.3 2 1 1/4 5 1.627 0.6 F31034

51 35 140 44.6 0.3 2 1 3/8 5 1/2 1.756 0.6 F31040

51 38 111 43.3 0.2 2 1 1/2 4 3/8 1.704 0.4 F31046

51 38 152 45.2 0.3 2 1 1/2 6 1.778 0.6 F31048

54 32 127 40.4 0.3 2 1/8 1 1/4 5 1.591 0.7 F31036

54 35 140 43.6 0.3 2 1/8 1 3/8 5 1/2 1.715 0.7 F31042

54 41 165 46.6 0.3 2 1/8 1 5/8 6 1/2 1.833 0.7 F31052

60 35 140 43.6 0.4 2 3/8 1 3/8 5 1/2 1.717 0.9 F31044

60 38 152 47.6 0.4 2 3/8 1 1/2 6 1.873 0.9 F31050

60 44 178 53.8 0.4 2 3/8 1 3/4 7 2.117 0.9 F31056

67 41 165 50.3 0.6 2 5/8 1 5/8 6 1/2 1.979 1.2 F31054

67 44 178 53.0 0.6 2 5/8 1 3/4 7 2.085 1.2 F31058

67 48 191 57.3 0.5 2 5/8 1 7/8 7 1/2 2.256 1.2 F31060

67 51 203 58.6 0.5 2 5/8 2 8 2.308 1.2 F31064

70 51 203 60.4 0.6 2 3/4 2 8 2.378 1.4 F31066

75 48 191 56.5 0.8 2 15/16 1 7/8 7 1/2 2.224 1.7 F31062

76 51 203 60.6 0.8 3 2 8 2.386 1.8 F31068

76 54 203 64.4 0.9 3 2 1/8 8 1/2 2.535 2.0 F31070

80 54 216 64.4 0.9 3 1/8 2 1/8 8 1/2 2.535 2.0 F31070

Page 21







Profile

Housing

Diameter

(mm)

Shaft

Diameter

(mm)

Housing

Length

(mm)

Groove

Diameter

(mm)

Approx.

Weight

(kg)

Housing

Diameter

(inches)

Shaft

Diameter

(inches)

Housing

Length

(inches)

Groove

Diameter

(inches)

Approx.

Weight

(lbs.)

Thordon

Part

Number*

76 57 229 67.4 1.1 3 2 1/4 9 2.653 2.5 F31072

80 57 229 67.4 1.1 3 1/8 2 1/4 9 2.653 2.5 F31072

80 64 254 73.6 1.1 3 1/8 2 1/2 10 2.899 2.4 F31076

86 57 229 67.4 1.1 3 3/8 2 1/4 9 2.653 2.5 F31072

86 60 241 70.5 1.1 3 3/8 2 3/8 9 1/2 2.776 2.5 F31074

86 64 254 73.6 1.1 3 3/8 2 1/2 10 2.899 2.4 F31076

86 67 267 76.9 1.0 3 3/8 2 5/8 10 1/2 3.029 2.2 F31078

86 70 279 79.2 1.4 3 3/8 2 3/4 11 3.117 3.2 F31080

95 70 279 79.2 1.4 3 3/4 2 3/4 11 3.117 3.2 F31080

95 73 292 83.4 1.4 3 3/4 2 7/8 11 1/2 3.282 3.1 F31082

95 76 305 86.1 1.7 3 3/4 3 12 3.390 3.7 F31086

102 76 305 86.1 1.7 4 3 12 3.390 3.7 F31086

102 83 165 91.9 1.0 4 3 1/4 6 1/2 3.619 2.2 F31092

108 79 318 88.4 2.1 4 1/4 3 1/8 12 1/2 3.480 4.5 F31088

108 83 165 91.9 1.0 4 1/4 3 1/4 6 1/2 3.619 2.2 F31092

108 89 178 98.2 1.1 4 1/4 3 1/2 7 3.868 2.5 F31098

114 86 171 95.2 1.2 4 1/2 3 3/8 6 3/4 3.748 2.6 F31094

114 89 178 98.2 1.1 4 1/2 3 1/2 7 3.868 2.5 F31098

114 92 184 98.1 1.1 4 1/2 3 5/8 7 1/4 3.863 2.4 F31100

114 95 191 105.6 1.9 4 1/2 3 3/4 7 1/2 4.159 4.2 F31106

127 95 191 105.6 1.9 5 3 3/4 7 1/2 4.159 4.2 F31106

127 102 203 112.1 1.8 5 4 8 4.414 4.0 F31112

133 95 191 105.6 1.9 5 1/4 3 3/4 7 1/2 4.159 4.2 F31106

133 98 197 106.6 1.9 5 1/4 3 7/8 7 3/4 4.198 4.1 F31108

133 102 203 112.1 1.8 5 1/4 4 8 4.414 4.0 F31112

133 105 210 114.0 1.7 5 1/4 4 1/8 8 1/4 4.488 3.8 F31114

140 108 216 117.1 2.0 5 1/2 4 1/4 8 1/2 4.612 4.4 F31116

140 114 229 124.8 2.2 5 1/2 4 1/2 9 4.915 4.9 F31122

146 111 222 120.3 2.3 5 3/4 4 3/8 8 3/4 4.735 5.1 F31118

146 114 229 124.8 2.2 5 3/4 4 1/2 9 4.915 4.9 F31122

156 117 235 126.7 2.8 6 1/8 4 5/8 9 1/4 4.989 6.2 F31124

156 121 241 129.6 2.7 6 1/8 4 3/4 9 1/2 5.104 6.0 F31126

156 124 248 132.7 2.6 6 1/8 4 7/8 9 3/4 5.226 5.7 F31128

156 127 254 137.6 3.3 6 1/8 5 10 5.418 7.2 F31132

165 127 254 137.6 3.3 6 1/2 5 10 5.418 7.2 F31132

171 133 267 145.7 4.2 6 3/4 5 1/4 10 1/2 5.736 9.1 F31136

178 133 267 145.7 4.2 7 5 1/4 10 1/2 5.736 9.1 F31136






SXL LARGE FULLY GROOVEDBEARINGS


Profile

Housing

Diameter

(mm)

Shaft

Diameter

(mm)

Housing

Length

(mm)

Groove

Diameter

(mm)

Approx.

Weight

(kg)

Housing

Diameter

(inches)

Shaft

Diameter

(inches)

Housing

Length

(inches)

Groove

Diameter

(inches)

Approx.

Weight

(lbs.)

Thordon

Part

Number*

171 137 273 150.4 4.0 6 3/4 5 3/8 10 3/4 5.923 8.9 F31140

178 137 273 150.4 4.0 7 5 3/8 10 3/4 5.923 8.9 F31140

178 140 279 151.7 3.9 7 5 1/2 11 5.973 8.6 F31142

178 143 286 154.8 3.7 7 5 5/8 11 1/4 6.093 8.2 F31144

178 146 292 158.0 3.6 7 5 3/4 11 1/2 6.221 7.8 F31146

191 149 305 161.2 4.9 7 1/2 5 7/8 12 6.347 10.7 F31148

191 152 305 164.4 4.6 7 1/2 6 12 6.471 10.1 F31150

Housing

Diameter

(mm)

Shaft

Diameter

(mm)

Housing

Length

(mm)

Groove

Diameter

(mm)

Approx.

Weight

(kg)

Housing

Diameter

(inches)

Shaft

Diameter

(inches)

Housing

Length

(inches)

Groove

Diameter

(inches)

Approx.

Weight

(lbs.)

Thordon

Part

Number*

212 158 330 177.8 7.3 8 3/8 6 1/4 13 7.000 16.0 F31154

228 171 330 193.8 8.3 9 6 3/4 13 7.629 18.2 F31158

244 184 330 206.5 9.3 9 5/8 7 1/4 13 8.131 20.5 F31162

266 196 330 219.3 11.5 10 1/2 7 3/4 13 8.633 25.3 F31166

273 209 330 232.0 11.0 10 3/4 8 1/4 13 9.135 24.1 F31170

285 222 330 244.7 11.4 11 1/4 8 3/4 13 9.636 25.0 F31174

298 235 330 257.5 12.1 11 3/4 9 1/4 13 10.136 26.7 F31178

314 247 330 275.1 14.0 12 3/8 9 3/4 13 10.830 30.8 F31182

327 260 330 283.0 14.6 12 7/8 10 1/4 13 11.140 32.2 F31186

343 273 330 295.6 16.0 13 1/2 10 3/4 13 11.639 35.2 F31190

358 285 330 308.4 17.4 14 1/8 11 1/4 13 12.143 38.3 F31194

374 298 330 321.2 18.9 14 3/4 11 3/4 13 12.645 41.5 F31198

Page 23



XL FULLY GROOVED BEARINGSMarine Applications (propeller shaft bearings)



- Low dry coefficient of friction, grease-free, good abrasion resistance, temperature limits of 60°C (140°F), pHrange of 5-10

Profile

Housing

Diameter

(mm)

Shaft

Diameter

(mm)

Housing

Length

(mm)

Groove

Diameter

(mm)

Approx.

Weight

(kg)

Housing

Diameter

(inches)

Shaft

Diameter

(inches)

Housing

Length

(inches)

Groove

Diameter

(inches)

Approx.

Weight

(lbs.)

Thordon

Part

Number*

32 19 76 25.1 0.1 1 1/4 3/4 3 0.987 0.2 F21002

32 22 89 26.0 0.1 1 1/4 7/8 3 1/2 1.022 0.2 F21004

32 25 76 27.6 0.1 1 1/4 1 3 1.088 0.1 F21010

32 25 102 28.3 0.1 1 1/4 1 4 1.116 0.2 F21012

35 22 89 27.6 0.1 1 3/8 7/8 3 1/2 1.087 0.2 F21006

35 25 102 30.1 0.1 1 3/8 1 4 1.187 0.2 F21014

38 22 89 27.8 0.1 1 1/2 7/8 3 1/2 1.093 0.3 F21008

38 25 102 31.9 0.1 1 1/2 1 4 1.257 0.3 F21016

38 29 114 35.3 0.1 1 1/2 1 1/8 4 1/2 1.388 0.3 F21022

38 32 127 35.3 0.1 1 1/2 1 1/4 5 1.389 0.3 F21030

41 25 102 32.1 0.2 1 5/8 1 4 1.262 0.3 F21018

41 29 114 35.1 0.2 1 5/8 1 1/8 4 1/2 1.381 0.3 F21024

44 29 114 36.8 0.2 1 3/4 1 1/8 4 1/2 1.450 0.4 F21026

44 32 127 38.5 0.2 1 3/4 1 1/4 5 1.515 0.4 F21032

48 35 140 41.6 0.2 1 7/8 1 3/8 5 1/2 1.637 0.5 F21038

51 25 102 32.5 0.3 2 1 4 1.278 0.6 F21020

51 29 114 38.7 0.3 2 1 1/8 4 1/2 1.522 0.6 F21028

51 32 127 41.6 0.3 2 1 1/4 5 1.637 0.6 F21034

51 35 132 44.9 0.3 2 1 3/8 5 1/2 1.766 0.6 F21040

51 38 111 43.5 0.2 2 1 1/2 4 3/8 1.714 0.4 F21046

51 38 152 45.4 0.3 2 1 1/2 6 1.786 0.6 F21048

54 32 127 40.6 0.3 2 1/8 1 1/4 5 1.600 0.7 F21036

54 35 140 43.8 0.3 2 1/8 1 3/8 5 1/2 1.726 0.7 F21042

54 41 165 46.8 0.3 2 1/8 1 5/8 6 1/2 1.844 0.7 F21052

60 35 140 43.9 0.4 2 3/8 1 3/8 5 1/2 1.728 0.9 F21044

60 38 152 47.9 0.4 2 3/8 1 1/2 6 1.885 1.0 F21050

60 44 178 54.1 0.4 2 3/8 1 3/4 7 2.131 0.9 F21056

67 41 165 50.6 0.6 2 5/8 1 5/8 6 1/2 1.991 1.3 F21054

67 44 178 53.3 0.6 2 5/8 1 3/4 7 2.098 1.3 F21058

67 48 191 57.7 0.6 2 5/8 1 7/8 7 1/2 2.270 1.2 F21060

67 51 203 59.0 0.5 2 5/8 2 8 2.322 1.2 F21064

70 51 203 60.8 0.6 2 3/4 2 8 2.393 1.4 F21066

75 48 191 56.8 0.8 2 15/16 1 7/8 7 1/2 2.237 1.7 F21062

76 51 203 61.0 0.8 3 2 8 2.401 1.8 F21068

76 54 203 64.8 0.9 3 2 1/8 8 1/2 2.551 2.1 F21070

76 57 229 67.8 1.2 3 2 1/4 9 2.670 2.5 F21072

Page 24







Profile

Housing

Diameter

(mm)

Shaft

Diameter

(mm)

Housing

Length

(mm)

Groove

Diameter

(mm)

Approx.

Weight

(kg)

Housing

Diameter

(inches)

Shaft

Diameter

(inches)

Housing

Length

(inches)

Groove

Diameter

(inches)

Approx.

Weight

(lbs.)

Thordon

Part

Number*

80 54 216 64.8 0.9 3 1/8 2 1/8 8 1/2 2.551 2.1 F21070

80 57 229 67.8 1.2 3 1/8 2 1/4 9 2.670 2.5 F21072

80 64 254 74.1 1.1 3 1/8 2 1/2 10 2.916 2.4 F21076

86 57 229 67.8 1.2 3 3/8 2 1/4 9 2.670 2.5 F21072

86 60 241 70.9 1.2 3 3/8 2 3/8 9 1/2 2.793 2.5 F21074

86 64 254 74.1 1.1 3 3/8 2 1/2 10 2.916 2.4 F21076

86 67 267 77.4 1.0 3 3/8 2 5/8 10 1/2 3.047 2.3 F21078

86 70 279 79.6 1.5 3 3/8 2 3/4 11 3.133 3.3 F21080

95 73 292 83.9 1.9 3 3/4 2 7/8 11 1/2 3.303 4.2 F21082

95 70 279 79.6 1.5 3 3/4 2 3/4 11 3.133 3.3 F21080

95 76 305 86.6 1.7 3 3/4 3 12 3.410 3.8 F21086

102 76 305 86.6 1.7 4 3 12 3.410 3.8 F21086

102 83 165 92.5 1.0 4 3 1/4 6 1/2 3.641 2.2 F21092

108 79 318 89.0 2.1 4 1/4 3 1/8 12 1/2 3.502 4.6 F21088

108 83 165 92.5 1.0 4 1/4 3 1/4 6 1/2 3.641 2.2 F21092

108 89 178 98.9 1.2 4 1/4 3 1/2 7 3.892 2.6 F21098

114 86 171 95.8 1.2 4 1/2 3 3/8 6 3/4 3.771 2.7 F21094

114 89 178 98.9 1.2 4 1/2 3 1/2 7 3.892 2.6 F21098

114 92 184 98.7 1.1 4 1/2 3 5/8 7 1/4 3.887 2.4 F21100

114 95 191 106.2 2.0 4 1/2 3 3/4 7 1/2 4.180 4.3 F21106

127 95 191 106.2 2.0 5 3 3/4 7 1/2 4.180 4.3 F21106

127 102 203 112.7 1.8 5 4 8 4.437 4.1 F21112

133 95 191 106.2 2.0 5 1/4 3 3/4 7 1/2 4.180 4.3 F21106

133 98 197 107.3 1.9 5 1/4 3 7/8 7 3/4 4.224 4.2 F21108

133 102 203 112.7 1.8 5 1/4 4 8 4.437 4.1 F21112

133 105 210 114.7 1.8 5 1/4 4 1/8 8 1/4 4.515 3.9 F21114

140 108 216 117.9 2.1 5 1/2 4 1/4 8 1/2 4.640 4.5 F21116

140 114 229 125.5 2.3 5 1/2 4 1/2 9 4.940 5.1 F21122

146 111 222 121.0 2.4 5 3/4 4 3/8 8 3/4 4.764 5.3 F21118

146 114 229 125.5 2.3 5 3/4 4 1/2 9 4.940 5.1 F21122

156 117 235 127.5 2.9 6 1/8 4 5/8 9 1/4 5.020 6.4 F21124

156 121 241 130.5 2.8 6 1/8 4 3/4 9 1/2 5.136 6.1 F21126

156 124 248 133.6 2.7 6 1/8 4 7/8 9 3/4 5.259 5.9 F21128

156 127 254 138.3 3.3 6 1/8 5 10 5.446 7.4 F21132

165 127 254 138.3 3.3 6 1/2 5 10 5.446 7.4 F21132

171 133 267 146.6 4.3 6 3/4 5 1/4 10 1/2 5.771 9.4 F21136

Page 25







XL LARGE FULLY GROOVEDBEARINGS

Profile

Housing

Diameter

(mm)

Shaft

Diameter

(mm)

Housing

Length

(mm)

Groove

Diameter

(mm)

Approx.

Weight

(kg)

Housing

Diameter

(inches)

Shaft

Diameter

(inches)

Housing

Length

(inches)

Groove

Diameter

(inches)

Approx.

Weight

(lbs.)

Thordon

Part

Number*

171 137 273 151.2 4.1 6 3/4 5 3/8 10 3/4 5.953 9.1 F21140

178 133 267 146.6 4.3 7 5 1/4 10 1/2 5.771 9.4 F21136

178 137 273 151.2 4.1 7 5 3/8 10 3/4 5.953 9.1 F21140

178 140 279 152.6 4.0 7 5 1/2 11 6.009 8.8 F21142

178 143 286 155.7 3.8 7 5 5/8 11 1/4 6.130 8.4 F21144

178 146 292 159.0 3.6 7 5 3/4 11 1/2 6.260 8.0 F21146

191 149 305 162.2 5.0 7 1/2 5 7/8 12 6.386 11.0 F21148

191 152 305 165.4 4.7 7 1/2 6 12 6.511 10.4 F21150

Housing

Diameter

(mm)

Shaft

Diameter

(mm)

Housing

Length

(mm)

Groove

Diameter

(mm)

Approx.

Weight

(kg)

Housing

Diameter

(inches)

Shaft

Diameter

(inches)

Housing

Length

(inches)

Groove

Diameter

(inches)

Approx.

Weight

(lbs.)

Thordon

Part

Number*

212 158 330 178.7 7.5 8 3/8 6 1/4 13 7.036 16.5 F21154

228 171 330 194.8 8.5 9 6 3/4 13 7.668 18.7 F21158

244 184 330 207.6 9.5 9 5/8 7 1/4 13 8.173 21.0 F21162

266 196 330 220.4 11.8 10 1/2 7 3/4 13 8.677 26.0 F21166

273 209 330 233.2 11.3 10 3/4 8 1/4 13 9.182 24.8 F21170

285 222 330 246.0 11.9 11 1/4 8 3/4 13 9.685 26.1 F21174

298 235 330 258.8 12.5 11 3/4 9 1/4 13 10.188 27.4 F21178

314 247 330 276.5 14.4 12 3/8 9 3/4 13 10.886 31.7 F21182

327 260 330 284.4 15.0 12 7/8 10 1/4 13 11.197 33.1 F21186

343 273 330 297.2 16.5 13 1/2 10 3/4 13 11.699 36.2 F21190

358 285 330 310.0 17.9 14 1/8 11 1/4 13 12.205 39.3 F21194

374 298 330 322.8 19.4 14 3/4 11 3/4 13 12.710 42.7 F21198

Page 26



COMPOSITE DREDGE, PUMP &INDUSTRIAL BEARINGSMarine Applications (dredge bearings)

- Water-lubricated, provide superior wear life in abrasiveconditions


-Provide superior wear life in abrasive operating conditions, a lower coefficient of friction than rubber

Profile

Housing

Diameter

(mm)

Shaft

Diameter

(mm)

Housing

Length

(mm)

Groove

Diameter

(mm)

Approx.

Weight

(kg)

Housing

Diameter

(inches)

Shaft

Diameter

(inches)

Housing

Length

(inches)

Groove

Diameter

(inches)

Approx.

Weight

(lbs.)

Thordon

Part

Number*

95 76 152 81.3 0.5 3 3/4 3 6 3.199 1.2 F24084

102 76 152 85.5 0.7 4 3 6 3.365 1.6 F24086

102 83 165 87.6 0.6 4 3 1/4 6 1/2 3.447 1.4 F24090

108 79 159 88.7 0.9 4 1/4 3 1/8 6 1/4 3.493 2.0 F24088

108 83 165 92.3 0.9 4 1/4 3 1/4 6 1/2 3.632 1.9 F24092

108 89 178 93.9 0.7 4 1/4 3 1/2 7 3.695 1.6 F24096

114 86 171 95.5 1.0 4 1/2 3 3/8 6 3/4 3.761 2.3 F24094

114 89 178 98.6 1.0 4 1/2 3 1/2 7 3.882 2.2 F24098

114 92 184 98.5 0.9 4 1/2 3 5/8 7 1/4 3.877 2.0 F24100

114 95 191 100.1 0.8 4 1/2 3 3/4 7 1/2 3.942 1.8 F24102

127 95 191 104.3 1.5 5 3 3/4 7 1/2 4.108 3.2 F24104

127 102 203 111.3 1.3 5 4 8 4.380 2.8 F24110

133 95 191 104.3 1.8 5 1/4 3 3/4 7 1/2 4.108 3.9 F24106

133 98 197 107.0 1.7 5 1/4 3 7/8 7 3/4 4.214 3.8 F24108

133 102 203 111.3 1.6 5 1/4 4 8 4.380 3.6 F24112

133 105 210 114.4 1.5 5 1/4 4 1/8 8 1/4 4.504 3.4 F24114

140 108 216 117.6 1.8 5 1/2 4 1/4 8 1/2 4.628 4.0 F24116

140 114 229 123.8 1.6 5 1/2 4 1/2 9 4.873 3.5 F24120

146 111 222 120.7 2.2 5 3/4 4 3/8 8 3/4 4.752 4.8 F24118

146 114 229 123.8 2.0 5 3/4 4 1/2 9 4.873 4.5 F24122

156 117 235 127.2 2.6 6 1/8 4 5/8 9 1/4 5.007 5.8 F24124

156 121 241 130.1 2.5 6 1/8 4 3/4 9 1/2 5.123 5.5 F24126

156 124 248 133.2 2.4 6 1/8 4 7/8 9 3/4 5.245 5.2 F24128

156 127 254 136.4 2.2 6 1/8 5 10 5.370 4.9 F24130

165 127 254 136.4 3.0 6 1/2 5 10 5.370 6.7 F24132

171 133 356 146.0 4.5 6 3/4 5 1/4 14 5.746 9.8 F24134

171 137 273 151.1 3.2 6 3/4 5 3/8 10 3/4 5.947 7.0 F24138

178 133 273 146.2 4.1 7 5 1/4 10 3/4 5.757 9.0 F24136

178 137 273 151.1 3.8 7 5 3/8 10 3/4 5.947 8.4 F24140

178 140 279 152.2 3.6 7 5 1/2 11 5.994 8.0 F24142

178 143 286 155.3 3.5 7 5 5/8 11 1/4 6.115 7.6 F24144

178 146 292 158.6 3.2 7 5 3/4 11 1/2 6.244 7.1 F24146

191 149 305 161.8 4.6 7 1/2 5 7/8 12 6.369 10.2 F24148

191 152 305 164.9 4.3 7 1/2 6 12 6.494 9.5 F24150

203 152 305 164.9 6.0 8 6 12 6.494 13.1 F24151

203 165 330 178.5 7.2 8 6 1/2 13 7.027 15.8 F24154


COMPOSITE DREDGE, PUMP &INDUSTRIAL BEARINGSMarine Applications (dredge bearings)

- Water-lubricated, provide superior wear life in abrasiveconditions


- Provide superior wear life in abrasive operating conditions, a lower coefficient of friction than rubber

Profile


Housing

Diameter

(mm)

Shaft

Diameter

(mm)

Housing

Length

(mm)

Groove

Diameter

(mm)

Approx.

Weight

(kg)

Housing

Diameter

(inches)

Shaft

Diameter

(inches)

Housing

Length

(inches)

Groove

Diameter

(inches)

Approx.

Weight

(lbs.)

Thordon

Part

Number*

213 159 330 178.5 7.2 8 3/8 6 1/4 13 7.027 15.8 F24154

222 171 330 194.5 8.7 8 3/4 6 3/4 13 7.658 19.1 F24158

229 178 330 194.5 8.7 9 1/8 7 13 7.658 19.1 F24158

235 184 330 207.3 9.2 9 1/4 7 1/4 13 8.163 20.3 F24162

244 191 330 207.3 9.2 9 5/8 7 1/2 13 8.163 20.3 F24162

251 197 330 220.1 11.5 9 7/8 7 3/4 13 8.667 25.4 F24166

267 203 330 220.1 11.5 10 1/2 8 13 8.667 25.4 F24166

267 210 330 233.0 11.0 10 1/2 8 1/4 13 9.172 24.1 F24170

273 216 330 233.0 11.0 10 3/4 8 1/2 13 9.172 24.1 F24170

273 191 330 207.3 3.2 10 3/4 7 1/2 13 8.163 7.0 F24163

279 222 330 245.7 11.5 11 8 3/4 13 9.675 25.3 F24174

286 229 330 245.7 11.5 11 1/4 9 13 9.675 25.3 F24174

292 216 330 233.0 13.8 11 1/2 8 1/2 13 9.172 30.4 F24171

292 235 330 258.5 12.1 11 1/2 9 1/4 13 10.178 26.6 F24178

298 241 330 258.5 12.1 11 3/4 9 1/2 13 10.178 26.6 F24178

311 241 330 258.5 13.8 12 1/4 9 1/2 13 10.178 30.3 F24179

Page 28

RIVERTOUGH PROPELLERSHAFT BEARINGSBonded FitMarine Applications (propeller shaft bearings)

- Water-lubricated, provide superior wear life in abrasiveconditions such as river systems

NOTESRiverTough tubes are produced one piece at 3:1 length:shaft diameter ratio.Supplied with the I.D. finished to suit a bonded fit.The O.D. is produced semi-finished for final machining to size to suit the actual housing size.

Bonded install: O.D. = housing - 0.75mm (0.030”)


Profile

Housing

Diameter

(mm)

Shaft or

Sleeve

Diameter

(mm)

Housing

Length

(mm)

Approx.

Weight

(kg)

Housing

Diameter

(inches)

Shaft or

Sleeve

Diameter

(inches)

Housing

Length

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Numbers "L"

Bonded Fit

111 76 229 2.7 4.375 3.000 9.000 6.0 F24L0300

114 83 248 2.9 4.500 3.250 9.750 6.3 F24L0325

121 89 267 3.2 4.750 3.500 10.500 7.1 F24L0350

133 95 286 4.3 5.250 3.750 11.250 9.5 F24L0375

140 102 305 4.8 5.500 4.000 12.000 10.6 F24L0400

146 108 324 5.4 5.750 4.250 12.750 11.8 F24L0425

152 114 343 5.9 6.000 4.500 13.500 13.0 F24L0450

159 121 362 6.5 6.250 4.750 14.250 14.3 F24L0475

171 127 381 8.3 6.750 5.000 15.000 18.2 F24L0500

175 133 400 8.4 6.875 5.250 15.750 18.5 F24L0525

184 140 419 9.8 7.250 5.500 16.500 21.6 F24L0550

184 146 438 9.2 7.250 5.750 17.250 20.2 F24L0575

197 152 457 8.6 7.750 6.000 18.000 19.0 F24L0600

203 159 476 9.3 8.000 6.250 18.750 20.5 F24L0625

213 165 495 10.8 8.375 6.500 19.500 23.9 F24L0650

222 171 514 12.5 8.750 6.750 20.250 27.6 F24L0675

232 178 533 14.3 9.125 7.000 21.000 31.6 F24L0700

235 184 552 14.3 9.250 7.250 21.750 31.6 F24L0725

244 191 572 16.3 9.625 7.500 22.500 36.0 F24L0750

251 197 591 17.4 9.875 7.750 23.250 38.3 F24L0775

260 203 610 22.2 10.250 8.000 24.000 48.9 F24L0800

267 210 629 20.8 10.500 8.250 24.750 45.9 F24L0825

273 216 648 22.0 10.750 8.500 25.500 48.5 F24L0850

279 222 667 23.3 11.000 8.750 26.250 51.3 F24L0875

286 229 686 27.7 11.250 9.000 27.000 61.0 F24L0900

292 235 705 25.9 11.500 9.250 27.750 57.1 F24L0925

298 241 724 27.2 11.750 9.500 28.500 60.1 F24L0950

308 248 743 30.4 12.125 9.750 29.250 66.9 F24L0975

314 254 762 31.9 12.375 10.000 30.000 70.2 F24L1000

321 260 781 33.4 12.625 10.250 30.750 73.7 F24L1025

327 267 800 35.0 12.875 10.500 31.500 77.2 F24L1050

333 273 819 36.6 13.125 10.750 32.250 80.8 F24L1075

343 279 838 40.5 13.500 11.000 33.000 89.2 F24L1100

349 286 857 42.3 13.750 11.250 33.750 93.1 F24L1125

359 292 876 61.5 14.125 11.500 34.500 135.7 F24L1150

Page 29

RIVERTOUGH PROPELLERSHAFT BEARINGSBonded FitMarine Applications (propeller shaft bearings)


NOTESRiverTough tubes are produced one piece at 3:1 length:shaft diameter ratio.Supplied with the I.D. finished to suit a bonded fit.The O.D. is produced semi-finished for final machining to size to suit the actual housing size.

Bonded install: O.D. = housing - 0.75mm (0.030”)


Profile

RIVERTOUGH PROPELLERSHAFT BEARINGSInterference FitMarine Applications (See notes on page 30) (propeller shaft bearings)

- Water-lubricated, provide superior wear life in abrasive conditions such as river systems

Housing

Diameter

(mm)

Shaft or

Sleeve

Diameter

(mm)

Housing

Length

(mm)

Approx.

Weight

(kg)

Housing

Diameter

(inches)

Shaft or

Sleeve

Diameter

(inches)

Housing

Length

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Numbers "L"

Bonded Fit

365 298 895 48.4 14.375 11.750 35.250 106.7 F24L1175

375 305 914 53.0 14.750 12.000 36.000 116.8 F24L1200

381 311 933 55.1 15.000 12.250 36.750 121.5 F24L1225

387 318 953 57.3 15.250 12.500 37.500 126.4 F24L1250

394 324 972 59.6 15.500 12.750 38.250 131.3 F24L1275

403 330 991 64.8 15.875 13.000 39.000 142.9 F24L1300

410 337 1010 67.3 16.125 13.250 39.750 148.3 F24L1325

416 343 1029 69.8 16.375 13.500 40.500 153.8 F24L1350

422 349 1048 72.3 16.625 13.750 41.250 159.3 F24l1375

429 356 1067 74.8 16.875 14.000 42.000 164.9 F24L1400

Housing

Diameter

(mm)

Shaft or

Sleeve

Diameter

(mm)

Housing

Length

(mm)

Approx.

Weight

(kg)

Housing

Diameter

(inches)

Shaft or

Sleeve

Diameter

(inches)

Housing

Length

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Numbers "INT"

Interference Fit

"INT"

Interference

(mm)

"INT"

Interference

(inches)

111 76 229 2.7 4.375 3.000 9.000 6.0 F24INT0300 0.89 0.035

114 83 248 2.9 4.500 3.250 9.750 6.3 F24INT0325 0.89 0.035

121 89 267 3.2 4.750 3.500 10.500 7.1 F24INT0350 0.89 0.035

133 95 286 4.3 5.250 3.750 11.250 9.5 F24INT0375 0.89 0.035

140 102 305 4.8 5.500 4.000 12.000 10.6 F24INT0400 0.89 0.035

146 108 324 5.4 5.750 4.250 12.750 11.8 F24INT0425 1.14 0.045

152 114 343 5.9 6.000 4.500 13.500 13.0 F24INT0450 1.14 0.045

159 121 362 6.5 6.250 4.750 14.250 14.3 F24INT0475 1.14 0.045

171 127 381 8.3 6.750 5.000 15.000 18.2 F24INT0500 1.14 0.045

175 133 400 8.4 6.875 5.250 15.750 18.5 F24INT0525 1.40 0.055

184 140 419 9.8 7.250 5.500 16.500 21.6 F24INT0550 1.40 0.055

RIVERTOUGH PROPELLERSHAFT BEARINGSInterference FitMarine Applications (propeller shaft bearings)


NOTESRiverTough tubes are produced one piece at 3:1 length:shaft diameter ratio.Supplied with the I.D. finished to suit interference fit.The O.D. is produced semi-finished for final machining to size to suit the actual housing size.

Interference install: O.D. = housing + “INT”


Profile

Housing

Diameter

(mm)

Shaft or

Sleeve

Diameter

(mm)

Housing

Length

(mm)

Approx.

Weight

(kg)

Housing

Diameter

(inches)

Shaft or

Sleeve

Diameter

(inches)

Housing

Length

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Numbers "INT"

Interference Fit

"INT"

Interference

(mm)

"INT"

Interference

(inches)

191 146 438 9.2 7.500 5.750 17.250 20.2 F24INT0575 1.40 0.055

197 152 457 8.6 7.750 6.000 18.000 19.0 F24INT0600 1.40 0.055

203 159 476 9.3 8.000 6.250 18.750 20.5 F24INT0625 1.65 0.065

213 165 495 10.8 8.375 6.500 19.500 23.9 F24INT0650 1.65 0.065

222 171 514 12.5 8.750 6.750 20.250 27.6 F24INT0675 1.65 0.065

232 178 533 14.3 9.125 7.000 21.000 31.6 F24INT0700 1.65 0.065

235 184 552 14.3 9.250 7.250 21.750 31.6 F24INT0725 1.65 0.065

244 191 572 16.3 9.625 7.500 22.500 36.0 F24INT0750 1.65 0.065

251 197 591 17.4 9.875 7.750 23.250 38.3 F24INT0775 1.91 0.075

260 203 610 22.2 10.250 8.000 24.000 48.9 F24INT0800 1.91 0.075

267 210 629 20.8 10.500 8.250 24.750 45.9 F24INT0825 1.91 0.075

273 216 648 22.0 10.750 8.500 25.500 48.5 F24INT0850 1.91 0.075

279 222 667 23.3 11.000 8.750 26.250 51.3 F24INT0875 1.91 0.075

286 229 686 27.7 11.250 9.000 27.000 61.0 F24INT0900 1.91 0.075

292 235 705 25.9 11.500 9.250 27.750 57.1 F24INT0925 2.16 0.085

298 241 724 27.2 11.750 9.500 28.500 60.1 F24INT0950 2.16 0.085

308 248 743 30.4 12.125 9.750 29.250 66.9 F24INT0975 2.16 0.085

314 254 762 31.9 12.375 10.000 30.000 70.2 F24INT1000 2.16 0.085

321 260 781 33.4 12.625 10.250 30.750 73.7 F24INT1025 2.16 0.085

327 267 800 35.0 12.875 10.500 31.500 77.2 F24INT1050 2.16 0.085

333 273 819 36.6 13.125 10.750 32.250 80.8 F24INT1075 2.41 0.095

343 279 838 40.5 13.500 11.000 33.000 89.2 F24INT1100 2.41 0.095

349 286 857 42.3 13.750 11.250 33.750 93.1 F24INT1125 2.41 0.095

359 292 876 61.5 14.125 11.500 34.500 135.7 F24INT1150 2.41 0.095

365 298 895 48.4 14.375 11.750 35.250 106.7 F24INT1175 2.41 0.095

375 305 914 53.0 14.750 12.000 36.000 116.8 F24INT1200 2.41 0.095

381 311 933 55.1 15.000 12.250 36.750 121.5 F24INT1225 2.80 0.110

387 318 953 57.3 15.250 12.500 37.500 126.4 F24INT1250 2.80 0.110

394 324 972 59.6 15.500 12.750 38.250 131.3 F24INT1275 2.80 0.110

403 330 991 64.8 15.875 13.000 39.000 142.9 F24INT1300 2.80 0.110

410 337 1010 67.3 16.125 13.250 39.750 148.3 F24INT1325 2.80 0.110

416 343 1029 69.8 16.375 13.500 40.500 153.8 F24INT1350 2.80 0.110

422 349 1048 72.3 16.625 13.750 41.250 159.3 F24INT1375 2.80 0.110

429 356 1067 74.8 16.875 14.000 42.000 164.9 F24INT1400 2.80 0.110

Page 30


COMPAC BEARINGSMarine Applications (propeller shaft bearings)

- Water-lubricated, high performance for clean wateroperation, low operating coefficient of friction, goodabrasion resistance, easily machined- No grooves on bottom loaded section of bearing

Profile

NOTES Fully grooved tubes are supplied rough molded with lubrication grooves to suit the above shaft and housing diameters. All sizesare nominal. Please use the Thordon Bearing Sizing Calculation Program for sizing and to ensure the fully grooved tube can bemachined with adequate lubrication grooves depth.

Housing

Diameter

(mm)

Shaft

Diameter

(mm)

Housing

Length

(mm)

Groove

Diameter

(mm)

Approx.

Weight

(kg)

Housing

Diameter

(inches)

Shaft

Diameter

(inches)

Housing

Length

(inches)

Groove

Diameter

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Number

54 32 383 42.5 0.9 2 1/8 1 1/4 15 1.675 2.0 F60TB018

54 35 416 45.5 0.9 2 1/8 1 3/8 16 1/4 1.790 2.0 F60TB021

54 41 364 48.5 0.6 2 1/8 1 5/8 14 1/4 1.911 1.4 F60TB026

60 35 416 45.8 1.2 2 3/8 1 3/8 16 1/4 1.803 2.7 F60TB022

60 38 364 48.3 1.0 2 3/8 1 1/2 14 1/4 1.901 2.2 F60TB025

60 44 416 53.4 1.0 2 3/8 1 3/4 16 1/4 2.102 2.1 F60TB028

67 41 390 51.9 1.3 2 5/8 1 5/8 15 1/4 2.045 2.9 F60TB027

67 44 396 55.1 1.2 2 5/8 1 3/4 15 1/2 2.169 2.7 F60TB029

67 48 432 58.2 1.2 2 5/8 1 7/8 17 3/8 2.293 2.7 F60TB030

67 51 357 59.8 0.9 2 5/8 2 14 2.354 2.0 F60TB032

70 51 357 61.4 1.1 2 3/4 2 14 2.419 2.4 F60TB033

75 48 442 58.4 1.8 2 15/16 1 7/8 17 3/8 2.300 3.9 F60TB031

75 54 376 65.2 1.3 3 2 1/8 14 3/4 2.566 2.8 F60TB035

75 57 396 67.0 1.2 3 2 1/4 15 1/2 2.639 2.7 F60TB037

76 51 357 61.6 1.4 3 2 14 2.424 3.1 F60TB034

79 54 377 65.3 1.6 3 1/8 2 1/8 14 3/4 2.570 3.5 F60TB036

79 57 396 67.4 1.5 3 1/8 2 1/4 15 1/2 2.655 3.4 F60TB038

79 64 435 72.6 1.4 3 1/8 2 1/2 17 2.860 3.0 F60TB041

86 57 396 68.5 1.9 3 3/8 2 1/4 15 1/2 2.698 4.3 F60TB039

86 60 416 71.7 1.9 3 3/8 2 3/8 16 1/4 2.822 4.2 F60TB040

86 64 289 74.8 1.2 3 3/8 2 1/2 11 3/4 2.945 2.7 F60TB042

86 67 312 77.5 1.2 3 3/8 2 5/8 12 1/4 3.050 2.6 F60TB043

86 70 325 78.9 1.1 3 3/8 2 3/4 12 3/4 3.107 2.4 F60TB044

95 70 325 81.8 1.7 3 3/4 2 3/4 12 3/4 3.221 3.7 F60TB045

95 73 338 84.9 1.6 3 3/4 2 7/8 13 1/4 3.343 3.5 F60TB046

95 76 351 87.0 1.5 3 3/4 3 13 3/4 3.427 3.3 F60TB047

102 76 351 88.2 1.9 4 3 13 3/4 3.472 4.3 F60TB048

102 83 377 93.4 1.7 4 3 1/4 14 3/4 3.678 3.8 F60TB050

108 79 364 91.4 2.3 4 1/4 3 1/8 14 1/4 3.599 5.2 F60TB049

108 83 377 94.6 2.2 4 1/4 3 1/4 14 3/4 3.723 4.9 F60TB051

114 86 390 97.8 2.7 4 1/2 3 3/8 15 1/4 3.850 5.9 F60TB052

108 89 403 99.8 2.6 4 1/4 3 1/2 15 3/4 3.930 5.6 F60TB053

114 89 403 101.0 2.6 4 1/2 3 1/2 15 3/4 3.978 5.6 F60TB054

114 92 416 104.1 2.4 4 1/2 3 5/8 16 1/4 4.100 5.3 F60TB055

114 95 429 106.2 2.2 4 1/2 3 3/4 16 3/4 4.183 5.0 F60TB056

127 95 429 107.5 3.6 5 3 3/4 16 3/4 4.233 7.9 F60TB057

133 95 429 107.6 4.3 5 1/4 3 3/4 16 3/4 4.238 9.5 F60TB058

Page 32

NOTES Fully grooved tubes are supplied rough molded with lubrication grooves to suit the above shaft and housing diameters. All sizesare nominal. Please use the Thordon Bearing Sizing Calculation Program for sizing and to ensure the fully grooved tube can bemachined with adequate lubrication grooves depth.


COMPAC BEARINGSMarine Applications (propeller shaft bearings)

- Water-lubricated, high performance for clean wateroperation, low operating coefficient of friction, goodabrasion resistance, easily machined- No grooves on bottom loaded section of bearing

Profile

Housing

Diameter

(mm)

Shaft

Diameter

(mm)

Housing

Length

(mm)

Groove

Diameter

(mm)

Approx.

Weight

(kg)

Housing

Diameter

(inches)

Shaft

Diameter

(inches)

Housing

Length

(inches)

Groove

Diameter

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Number

133 98 442 110.7 4.2 5 1/4 3 7/8 17 3/8 4.360 9.2 F60TB059

140 100 200 110.0 1.9 5 1/2 3 7/8 7 7/8 4.331 4.2 F60TB100

146 110 220 121.0 2.0 5 3/4 4 3/8 8 5/8 4.764 4.5 F60TB110

152 120 240 132.0 2.1 6 4 3/4 9 1/2 5.197 4.6 F60TB120

175 130 260 143.0 3.6 6 7/8 5 1/8 10 1/4 5.630 7.9 F60TB130

185 140 280 154.0 4.1 7 1/4 5 1/2 11 6.063 9.0 F60TB140

200 150 300 165.0 5.3 7 7/8 5 7/8 11 3/4 6.496 11.6 F60TB150

205 160 320 176.0 5.3 8 1/8 6 1/4 12 5/8 6.929 11.6 F60TB160

215 170 340 187.0 5.9 8 1/2 6 3/4 13 3/8 7.362 13.0 F60TB170

230 180 360 198.0 7.4 9 7 1/8 14 1/8 7.795 16.3 F60TB180

245 190 380 209.0 9.1 9 5/8 7 1/2 15 8.228 20.1 F60TB190

250 200 400 220.0 9.0 9 7/8 7 7/8 15 3/4 8.661 19.9 F60TB200

266 210 420 231.0 11.2 10 1/2 8 1/4 16 1/2 9.094 24.7 F60TB210

277 220 440 242.0 12.5 10 7/8 8 5/8 17 3/8 9.528 27.5 F60TB220

292 230 460 253.0 14.9 11 1/2 9 18 1/8 9.961 32.9 F60TB230

298 240 480 264.0 15.0 11 3/4 9 1/2 18 7/8 10.394 33.1 F60TB240

312 250 500 275.0 17.5 12 1/4 9 7/8 19 5/8 10.827 38.5 F60TB250

320 260 520 286.0 18.1 12 5/8 10 1/4 20 1/2 11.260 40.0 F60TB260

335 270 540 297.0 21.3 13 1/4 10 5/8 21 1/4 11.693 46.9 F60TB270

345 280 560 308.0 22.8 13 5/8 11 22 12.126 50.2 F60TB280

360 290 580 319.0 26.4 14 1/8 11 3/8 22 7/8 12.559 58.3 F60TB290

375 300 600 330.0 30.4 14 3/4 11 3/4 23 5/8 12.992 67.1 F60TB300

Page 33

NOTESAll tubes are supplied rough molded and sizes are nominal. Actual O.D. and I.D. are approximately 0.5mm (1/32") oversizeand undersize respectively to allow for clean-up.


THORPLAS-BLUE METRE LONG TUBESMarine Applications (rudder steering and linkage bushings, deck equipment)

- Grease-free, low operating coefficient of friction, excellent bearing peformance in pressures up to 45 MPa(6527 psi)

Industrial Applications (pump, grapple, wicket gate and linkage bearings)

- Higher stiffness and operating pressure than Thordonelastomers without the need for metal backing, max.operating temperature in water ~80°C (~175°F), suitablefor most chemical solutions pH 3-11, exceptionally lowwear in non-abrasive environments

Profile

Bearing

Outside

Diameter

(mm)

Bearing

Inside

Diameter

(mm)

Bearing

Length

(mm)

Approx.

Weight

(kg)

Bearing

Outside

Diameter

(inches)

Bearing

Inside

Diameter

(inches)

Bearing

Length

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Number

50 20 1000 2.9 1.969 0.787 39.4 6.3 GM15050020

50 25 1000 2.6 1.969 0.984 39.4 5.8 GM15050025

50 30 1000 2.4 1.969 1.181 39.4 5.2 GM15050030

60 20 1000 4.2 2.362 0.787 39.4 9.2 GM15060020

60 25 1000 3.9 2.362 0.984 39.4 8.7 GM15060025

60 30 1000 3.7 2.362 1.181 39.4 8.1 GM15060030

70 20 1000 5.7 2.756 0.787 39.4 12.6 GM15070020

70 25 1000 5.5 2.756 0.984 39.4 12.1 GM15070025

70 30 1000 5.2 2.756 1.181 39.4 11.5 GM15070030

70 40 1000 4.5 2.756 1.575 39.4 9.9 GM15070040

80 20 1000 7.5 3.150 0.787 39.4 16.5 GM15080020

80 25 1000 7.3 3.150 0.984 39.4 16.0 GM15080025

80 30 1000 7.0 3.150 1.181 39.4 15.4 GM15080030

80 40 1000 6.3 3.150 1.575 39.4 13.8 GM15080040

80 50 1000 5.3 3.150 1.969 39.4 11.7 GM15080050

90 30 1000 9.0 3.543 1.181 39.4 19.8 GM15090030

90 40 1000 8.3 3.543 1.575 39.4 18.2 GM15090040

90 50 1000 7.3 3.543 1.969 39.4 16.1 GM15090050

90 60 1000 6.1 3.543 2.362 39.4 13.5 GM15090060

100 25 1000 11.5 3.937 0.984 39.4 25.3 GM15100025

100 40 1000 10.5 3.937 1.575 39.4 23.1 GM15100040

100 50 1000 9.5 3.937 1.969 39.4 21.0 GM15100050

100 60 1000 8.3 3.937 2.362 39.4 18.4 GM15100060

100 70 1000 6.9 3.937 2.756 39.4 15.3 GM15100070

110 25 1000 13.9 4.331 0.984 39.4 30.7 GM15110025

110 30 1000 13.7 4.331 1.181 39.4 30.1 GM15110030

110 40 1000 12.9 4.331 1.575 39.4 28.5 GM15110040

110 50 1000 12.0 4.331 1.969 39.4 26.4 GM15110050

110 60 1000 10.8 4.331 2.362 39.4 23.8 GM15110060

110 70 1000 9.4 4.331 2.756 39.4 20.7 GM15110070

110 80 1000 7.8 4.331 3.150 39.4 17.1 GM15110080

120 50 1000 14.7 4.724 1.969 39.4 32.3 GM15120050

120 60 1000 13.6 4.724 2.362 39.4 30.0 GM15120060

120 70 1000 12.1 4.724 2.756 39.4 26.6 GM15120070

120 80 1000 10.4 4.724 3.150 39.4 23.0 GM15120080

120 90 1000 8.6 4.724 3.543 39.4 18.9 GM15120090

130 30 1000 19.2 5.118 1.181 39.4 42.3 GM15130030

Page 34







Profile

Bearing

Outside

Diameter

(mm)

Bearing

Inside

Diameter

(mm)

Bearing

Length

(mm)

Approx.

Weight

(kg)

Bearing

Outside

Diameter

(inches)

Bearing

Inside

Diameter

(inches)

Bearing

Length

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Number

130 50 1000 17.5 5.118 1.969 39.4 38.6 GM15130050

130 70 1000 14.9 5.118 2.756 39.4 32.9 GM15130070

130 80 1000 13.3 5.118 3.150 39.4 29.4 GM15130080

130 90 1000 11.5 5.118 3.543 39.4 25.3 GM15130090

130 100 1000 9.4 5.118 3.937 39.4 20.7 GM15130100

140 70 1000 18.1 5.512 2.756 39.4 39.8 GM15140070

140 80 1000 16.4 5.512 3.150 39.4 36.2 GM15140080

140 90 1000 14.6 5.512 3.543 39.4 32.2 GM15140090

140 100 1000 12.5 5.512 3.937 39.4 27.6 GM15140100

140 110 1000 10.2 5.512 4.331 39.4 22.5 GM15140110

150 90 1000 18.1 5.906 3.543 39.4 40.0 GM15150090

150 100 1000 15.9 5.906 3.937 39.4 35.0 GM15150100

150 110 1000 13.6 5.906 4.331 39.4 30.0 GM15150110

150 120 1000 11.0 5.906 4.724 39.4 24.2 GM15150120

150 130 1000 8.2 5.906 5.118 39.4 18.1 GM15150130

160 60 1000 26.4 6.299 2.362 39.4 58.2 GM15160060

160 70 1000 25.0 6.299 2.756 39.4 55.1 GM15160070

160 80 1000 23.4 6.299 3.150 39.4 51.5 GM15160080

160 90 1000 21.5 6.299 3.543 39.4 47.4 GM15160090

160 100 1000 19.4 6.299 3.937 39.4 42.8 GM15160100

160 110 1000 17.1 6.299 4.331 39.4 37.7 GM15160110

160 120 1000 14.6 6.299 4.724 39.4 32.1 GM15160120

160 130 1000 11.8 6.299 5.118 39.4 26.1 GM15160130

170 70 1000 28.8 6.693 2.756 39.4 63.5 GM15170070

170 90 1000 25.3 6.693 3.543 39.4 55.8 GM15170090

170 100 1000 23.2 6.693 3.937 39.4 51.2 GM15170100

170 110 1000 20.9 6.693 4.331 39.4 46.1 GM15170110

170 120 1000 18.4 6.693 4.724 39.4 40.5 GM15170120

170 130 1000 15.6 6.693 5.118 39.4 34.4 GM15170130

170 140 1000 12.7 6.693 5.512 39.4 27.9 GM15170140

170 150 1000 9.4 6.693 5.906 39.4 20.8 GM15170150

180 100 1000 27.3 7.087 3.937 39.4 60.1 GM15180100

180 110 1000 24.9 7.087 4.331 39.4 55.0 GM15180110

180 120 1000 22.4 7.087 4.724 39.4 49.4 GM15180120

180 130 1000 19.6 7.087 5.118 39.4 43.3 GM15180130






Profile


Bearing

Outside

Diameter

(mm)

Bearing

Inside

Diameter

(mm)

Bearing

Length

(mm)

Approx.

Weight

(kg)

Bearing

Outside

Diameter

(inches)

Bearing

Inside

Diameter

(inches)

Bearing

Length

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Number

180 140 1000 16.6 7.087 5.512 39.4 36.7 GM15180140

180 150 1000 13.5 7.087 5.906 39.4 29.7 GM15180150

190 90 1000 33.6 7.480 3.543 39.4 74.1 GM15190090

190 100 1000 31.5 7.480 3.937 39.4 69.5 GM15190100

190 110 1000 29.2 7.480 4.331 39.4 64.4 GM15190110

190 120 1000 26.7 7.480 4.724 39.4 58.8 GM15190120

190 130 1000 23.9 7.480 5.118 39.4 52.7 GM15190130

190 140 1000 20.9 7.480 5.512 39.4 46.1 GM15190140

190 150 1000 17.7 7.480 5.906 39.4 39.0 GM15190150

190 160 1000 14.2 7.480 6.299 39.4 31.4 GM15190160

200 100 1000 36.0 7.874 3.937 39.4 79.4 GM15200100

200 110 1000 33.7 7.874 4.331 39.4 74.3 GM15200110

200 120 1000 31.2 7.874 4.724 39.4 68.7 GM15200120

200 130 1000 28.4 7.874 5.118 39.4 62.6 GM15200130

200 140 1000 25.4 7.874 5.512 39.4 56.0 GM15200140

200 150 1000 22.2 7.874 5.906 39.4 48.9 GM15200150

200 160 1000 18.7 7.874 6.299 39.4 41.3 GM15200160

230 130 1000 43.2 9.055 5.118 39.4 95.2 GM15230130

230 140 1000 40.2 9.055 5.512 39.4 88.7 GM15230140

230 150 1000 37.0 9.055 5.906 39.4 81.6 GM15230150

230 180 1000 26.0 9.055 7.087 39.4 57.3 GM15230180

250 150 1000 48.0 9.843 5.906 39.4 105.8 GM15250150

250 160 1000 44.5 9.843 6.299 39.4 98.2 GM15250160

250 180 1000 37.0 9.843 7.087 39.4 81.6 GM15250180

250 200 1000 28.5 9.843 7.874 39.4 62.9 GM15250200

260 200 1000 34.4 10.236 7.874 39.4 75.8 GM15260200

300 200 1000 60.0 11.811 7.874 39.4 132.3 GM15300200

300 210 1000 55.4 11.811 8.268 39.4 122.2 GM15300210

300 220 1000 50.6 11.811 8.661 39.4 111.6 GM15300220

300 230 1000 45.6 11.811 9.055 39.4 100.5 GM15300230

300 240 1000 40.4 11.811 9.449 39.4 89.0 GM15300240

300 260 1000 29.2 11.811 10.236 39.4 64.3 GM15300260

300 280 1000 17.1 11.811 11.024 39.4 37.6 GM15300280

310 210 1000 62.4 12.205 8.268 39.4 137.6 GM15310210

310 220 1000 57.6 12.205 8.661 39.4 127.0 GM15310220





Profile



Page 36

Bearing

Outside

Diameter

(mm)

Bearing

Inside

Diameter

(mm)

Bearing

Length

(mm)

Approx.

Weight

(kg)

Bearing

Outside

Diameter

(inches)

Bearing

Inside

Diameter

(inches)

Bearing

Length

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Number

310 230 1000 52.6 12.205 9.055 39.4 115.9 GM15310230

310 240 1000 47.3 12.205 9.449 39.4 104.3 GM15310240

310 260 1000 36.2 12.205 10.236 39.4 79.7 GM15310260

310 280 1000 24.0 12.205 11.024 39.4 53.0 GM15310280

320 220 1000 64.8 12.598 8.661 39.4 142.9 GM15320220

320 230 1000 59.8 12.598 9.055 39.4 131.8 GM15320230

320 240 1000 54.5 12.598 9.449 39.4 120.2 GM15320240

320 260 1000 43.3 12.598 10.236 39.4 95.5 GM15320260

320 280 1000 31.3 12.598 11.024 39.4 68.9 GM15320280

330 230 1000 67.2 12.992 9.055 39.4 148.1 GM15330230

330 240 1000 62.0 12.992 9.449 39.4 136.6 GM15330240

330 260 1000 50.8 12.992 10.236 39.4 111.9 GM15330260

330 280 1000 38.7 12.992 11.024 39.4 85.3 GM15330280

350 260 1000 66.3 13.780 10.236 39.4 146.2 GM15350260

350 280 1000 54.2 13.780 11.024 39.4 119.5 GM15350280

370 280 1000 70.6 14.567 11.024 39.4 155.7 GM15370280

420 320 1000 88.8 16.535 12.598 39.4 195.8 GM15420320

420 340 1000 74.0 16.535 13.386 39.4 163.1 GM15420340

420 350 1000 66.3 16.535 13.780 39.4 146.1 GM15420350

420 360 1000 58.3 16.535 14.173 39.4 128.5 GM15420360

420 380 1000 41.6 16.535 14.961 39.4 91.8 GM15420380

420 400 1000 24.1 16.535 15.748 39.4 53.2 GM15420400

440 340 1000 93.6 17.323 13.386 39.4 206.4 GM15440340

440 350 1000 85.9 17.323 13.780 39.4 189.3 GM15440350

440 360 1000 77.9 17.323 14.173 39.4 171.7 GM15440360

440 380 1000 61.3 17.323 14.961 39.4 135.1 GM15440380

440 400 1000 43.7 17.323 15.748 39.4 96.4 GM15440400

460 360 1000 98.4 18.110 14.173 39.4 216.9 GM15460360

460 380 1000 81.8 18.110 14.961 39.4 180.3 GM15460380

460 400 1000 64.3 18.110 15.748 39.4 141.7 GM15460400

480 380 1000 103.2 18.898 14.961 39.4 227.5 GM15480380

480 400 1000 85.7 18.898 15.748 39.4 188.9 GM15480400

710 650 1000 101.6 27.953 25.591 39.4 224.0 GM15710650


NOTESAll rod sizes are nominal. Actual O.D. is approximately 0.5mm (1/32") oversized to allow for clean-up.

THORPLAS-BLUE RODSIndustrial Applications (replacement for bronze and plastics)

- Grease-free, low dry coefficient of friction, temperaturelimits of 110°C (230°F) dry and 80°C (175°F) wet, pHrange of 3-11

Profile

Page 37

Rod Diameter

(mm)

Rod Length

(mm)

Approx.

Weight

(kg)

Rod Diameter

(inches)

Rod Length

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Number

30 1000 1.2 1.181 39.4 2.7 GM10030

40 1000 2.1 1.575 39.4 4.6 GM10040

50 1000 3.2 1.969 39.4 7.0 GM10050

60 1000 4.5 2.362 39.4 9.9 GM10060

70 1000 6.0 2.756 39.4 13.3 GM10070

80 1000 7.8 3.150 39.4 17.2 GM10080

90 1000 9.8 3.543 39.4 21.6 GM10090

100 1000 12.0 3.937 39.4 26.5 GM10100


THORPLAS-BLUE SPLIT SPHERICALBEARINGMarine & Industrial Applications (rudder steering gear, hydraulic rams)

- Developed for the live end of a hydraulic steering system. The ThorPlas-Blue Split Spherical Bearing (SSB) solvesthe problem of less than desirable alignment tolerances in the hydraulic steering system design.

Profile

Description Shaft Size (mm)

Shaft Size

(inches)

Thordon Part

Number

Housing with ThorPlas-Blue Split Spherical Bearing 38.1 1.5 G150015

Spare ThorPlas-Blue Spherical Bearing 38.1 1.5 G150015-SPH







THORPLAS-WHITE METRE LONG TUBESIndustrial Applications (food equipment, drinking and potable water bearing applications)

- Specifically developed to operate as a drinking watersystems component used in treatment and distribution ofpotable water, and as a material used in construction offood equipment. It has been listed by the NSF InternationalCertification for NSF/ANSI 61 Drinking Water SystemComponents and NSF/ANSI 51 Food Equipment Materials,and has also achieved WRAS (Water Regulations AdvisoryScheme) material approval.

Profile



Page 39

Bearing

Outside

Diameter

(mm)

Bearing

Inside

Diameter

(mm)

Bearing

Length

(mm)

Approx.

Weight

(kg)

Bearing

Outside

Diameter

(inches)

Bearing

Inside

Diameter

(inches)

Bearing

Length

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Number

50 20 1000 2.9 1.969 0.787 39.4 6.3 GM25050020

50 25 1000 2.6 1.969 0.984 39.4 5.8 GM25050025

50 30 1000 2.4 1.969 1.181 39.4 5.2 GM25050030

60 20 1000 4.2 2.362 0.787 39.4 9.2 GM25060020

60 25 1000 3.9 2.362 0.984 39.4 8.7 GM25060025

60 30 1000 3.7 2.362 1.181 39.4 8.1 GM25060030

70 20 1000 5.7 2.756 0.787 39.4 12.6 GM25070020

70 25 1000 5.5 2.756 0.984 39.4 12.1 GM25070025

70 30 1000 5.2 2.756 1.181 39.4 11.5 GM25070030

70 40 1000 4.5 2.756 1.575 39.4 9.9 GM25070040

80 20 1000 7.5 3.150 0.787 39.4 16.5 GM25080020

80 25 1000 7.3 3.150 0.984 39.4 16.0 GM25080025

80 30 1000 7.0 3.150 1.181 39.4 15.4 GM25080030

80 40 1000 6.3 3.150 1.575 39.4 13.8 GM25080040

80 50 1000 5.3 3.150 1.969 39.4 11.7 GM25080050

90 30 1000 9.0 3.543 1.181 39.4 19.8 GM25090030

90 40 1000 8.3 3.543 1.575 39.4 18.2 GM25090040

90 50 1000 7.3 3.543 1.969 39.4 16.1 GM25090050

90 60 1000 6.1 3.543 2.362 39.4 13.5 GM25090060

100 25 1000 11.5 3.937 0.984 39.4 25.3 GM25100025

100 40 1000 10.5 3.937 1.575 39.4 23.1 GM25100040

100 50 1000 9.5 3.937 1.969 39.4 21.0 GM25100050

100 60 1000 8.3 3.937 2.362 39.4 18.4 GM25100060

100 70 1000 6.9 3.937 2.756 39.4 15.3 GM25100070

110 25 1000 13.9 4.331 0.984 39.4 30.7 GM25110025

110 30 1000 13.7 4.331 1.181 39.4 30.1 GM25110030

110 40 1000 12.9 4.331 1.575 39.4 28.5 GM25110040

110 50 1000 12.0 4.331 1.969 39.4 26.4 GM25110050

110 60 1000 10.8 4.331 2.362 39.4 23.8 GM25110060

110 70 1000 9.4 4.331 2.756 39.4 20.7 GM25110070

110 80 1000 7.8 4.331 3.150 39.4 17.1 GM25110080

120 50 1000 14.7 4.724 1.969 39.4 32.3 GM25120050

120 60 1000 13.6 4.724 2.362 39.4 30.0 GM25120060

120 70 1000 12.1 4.724 2.756 39.4 26.6 GM25120070

120 80 1000 10.4 4.724 3.150 39.4 23.0 GM25120080

120 90 1000 8.6 4.724 3.543 39.4 18.9 GM25120090

130 30 1000 19.2 5.118 1.181 39.4 42.3 GM25130030

130 50 1000 17.5 5.118 1.969 39.4 38.6 GM25130050



Profile



Page 40

Bearing

Outside

Diameter

(mm)

Bearing

Inside

Diameter

(mm)

Bearing

Length

(mm)

Approx.

Weight

(kg)

Bearing

Outside

Diameter

(inches)

Bearing

Inside

Diameter

(inches)

Bearing

Length

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Number

130 70 1000 14.9 5.118 2.756 39.4 32.9 GM25130070

130 80 1000 13.3 5.118 3.150 39.4 29.4 GM25130080

130 90 1000 11.5 5.118 3.543 39.4 25.3 GM25130090

130 100 1000 9.4 5.118 3.937 39.4 20.7 GM25130100

140 70 1000 18.1 5.512 2.756 39.4 39.8 GM25140070

140 80 1000 16.4 5.512 3.150 39.4 36.2 GM25140080

140 90 1000 14.6 5.512 3.543 39.4 32.2 GM25140090

140 100 1000 12.5 5.512 3.937 39.4 27.6 GM25140100

140 110 1000 10.2 5.512 4.331 39.4 22.5 GM25140110

150 90 1000 18.1 5.906 3.543 39.4 40.0 GM25150090

150 100 1000 15.9 5.906 3.937 39.4 35.0 GM25150100

150 110 1000 13.6 5.906 4.331 39.4 30.0 GM25150110

150 120 1000 11.0 5.906 4.724 39.4 24.2 GM25150120

150 130 1000 8.2 5.906 5.118 39.4 18.1 GM25150130

160 60 1000 26.4 6.299 2.362 39.4 58.2 GM25160060

160 70 1000 25.0 6.299 2.756 39.4 55.1 GM25160070

160 80 1000 23.4 6.299 3.150 39.4 51.5 GM25160080

160 90 1000 21.5 6.299 3.543 39.4 47.4 GM25160090

160 100 1000 19.4 6.299 3.937 39.4 42.8 GM25160100

160 110 1000 17.1 6.299 4.331 39.4 37.7 GM25160110

160 120 1000 14.6 6.299 4.724 39.4 32.1 GM25160120

160 130 1000 11.8 6.299 5.118 39.4 26.1 GM25160130

170 70 1000 28.8 6.693 2.756 39.4 63.5 GM25170070

170 90 1000 25.3 6.693 3.543 39.4 55.8 GM25170090

170 100 1000 23.2 6.693 3.937 39.4 51.2 GM25170100

170 110 1000 20.9 6.693 4.331 39.4 46.1 GM25170110

170 120 1000 18.4 6.693 4.724 39.4 40.5 GM25170120

170 130 1000 15.6 6.693 5.118 39.4 34.4 GM25170130

170 140 1000 12.7 6.693 5.512 39.4 27.9 GM25170140

170 150 1000 9.4 6.693 5.906 39.4 20.8 GM25170150

180 100 1000 27.3 7.087 3.937 39.4 60.1 GM25180100

180 110 1000 24.9 7.087 4.331 39.4 55.0 GM25180110

180 120 1000 22.4 7.087 4.724 39.4 49.4 GM25180120

180 130 1000 19.6 7.087 5.118 39.4 43.3 GM25180130

180 140 1000 16.6 7.087 5.512 39.4 36.7 GM25180140

180 150 1000 13.5 7.087 5.906 39.4 29.7 GM25180150



Profile



Page 41

Bearing

Outside

Diameter

(mm)

Bearing

Inside

Diameter

(mm)

Bearing

Length

(mm)

Approx.

Weight

(kg)

Bearing

Outside

Diameter

(inches)

Bearing

Inside

Diameter

(inches)

Bearing

Length

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Number

190 90 1000 33.6 7.480 3.543 39.4 74.1 GM25190090

190 100 1000 31.5 7.480 3.937 39.4 69.5 GM25190100

190 110 1000 29.2 7.480 4.331 39.4 64.4 GM25190110

190 120 1000 26.7 7.480 4.724 39.4 58.8 GM25190120

190 130 1000 23.9 7.480 5.118 39.4 52.7 GM25190130

190 140 1000 20.9 7.480 5.512 39.4 46.1 GM25190140

190 150 1000 17.7 7.480 5.906 39.4 39.0 GM25190150

190 160 1000 14.2 7.480 6.299 39.4 31.4 GM25190160

200 100 1000 36.0 7.874 3.937 39.4 79.4 GM25200100

200 110 1000 33.7 7.874 4.331 39.4 74.3 GM25200110

200 120 1000 31.2 7.874 4.724 39.4 68.7 GM25200120

200 130 1000 28.4 7.874 5.118 39.4 62.6 GM25200130

200 140 1000 25.4 7.874 5.512 39.4 56.0 GM25200140

200 150 1000 22.2 7.874 5.906 39.4 48.9 GM25200150

200 160 1000 18.7 7.874 6.299 39.4 41.3 GM25200160

230 130 1000 43.2 9.055 5.118 39.4 95.2 GM25230130

230 140 1000 40.2 9.055 5.512 39.4 88.7 GM25230140

230 150 1000 37.0 9.055 5.906 39.4 81.6 GM25230150

230 180 1000 26.0 9.055 7.087 39.4 57.3 GM25230180

250 150 1000 48.0 9.843 5.906 39.4 105.8 GM25250150

250 160 1000 44.5 9.843 6.299 39.4 98.2 GM25250160

250 180 1000 37.0 9.843 7.087 39.4 81.6 GM25250180

250 200 1000 28.5 9.843 7.874 39.4 62.9 GM25250200

260 200 1000 34.4 10.236 7.874 39.4 75.8 GM25260200

300 200 1000 60.0 11.811 7.874 39.4 132.3 GM25300200

300 210 1000 55.4 11.811 8.268 39.4 122.2 GM25300210

300 220 1000 50.6 11.811 8.661 39.4 111.6 GM25300220

300 230 1000 45.6 11.811 9.055 39.4 100.5 GM25300230

300 240 1000 40.4 11.811 9.449 39.4 89.0 GM25300240

300 260 1000 29.2 11.811 10.236 39.4 64.3 GM25300260

300 280 1000 17.1 11.811 11.024 39.4 37.6 GM25300280

310 210 1000 62.4 12.205 8.268 39.4 137.6 GM25310210

310 220 1000 57.6 12.205 8.661 39.4 127.0 GM25310220

310 230 1000 52.6 12.205 9.055 39.4 115.9 GM25310230

310 240 1000 47.3 12.205 9.449 39.4 104.3 GM25310240

310 260 1000 36.2 12.205 10.236 39.4 79.7 GM25310260



Profile



Page 42

Bearing

Outside

Diameter

(mm)

Bearing

Inside

Diameter

(mm)

Bearing

Length

(mm)

Approx.

Weight

(kg)

Bearing

Outside

Diameter

(inches)

Bearing

Inside

Diameter

(inches)

Bearing

Length

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Number

310 280 1000 24.0 12.205 11.024 39.4 53.0 GM25310280

320 220 1000 64.8 12.598 8.661 39.4 142.9 GM25320220

320 230 1000 59.8 12.598 9.055 39.4 131.8 GM25320230

320 240 1000 54.5 12.598 9.449 39.4 120.2 GM25320240

320 260 1000 43.3 12.598 10.236 39.4 95.5 GM25320260

320 280 1000 31.3 12.598 11.024 39.4 68.9 GM25320280

330 230 1000 67.2 12.992 9.055 39.4 148.1 GM25330230

330 240 1000 62.0 12.992 9.449 39.4 136.6 GM25330240

330 260 1000 50.8 12.992 10.236 39.4 111.9 GM25330260

330 280 1000 38.7 12.992 11.024 39.4 85.3 GM25330280

350 260 1000 66.3 13.780 10.236 39.4 146.2 GM25350260

350 280 1000 54.2 13.780 11.024 39.4 119.5 GM25350280

370 280 1000 70.6 14.567 11.024 39.4 155.7 GM25370280

420 320 1000 88.8 16.535 12.598 39.4 195.8 GM25420320

420 340 1000 74.0 16.535 13.386 39.4 163.1 GM25420340

420 350 1000 66.3 16.535 13.780 39.4 146.1 GM25420350

420 360 1000 58.3 16.535 14.173 39.4 128.5 GM25420360

420 380 1000 41.6 16.535 14.961 39.4 91.8 GM25420380

420 400 1000 24.1 16.535 15.748 39.4 53.2 GM25420400

440 340 1000 93.6 17.323 13.386 39.4 206.4 GM25440340

440 350 1000 85.9 17.323 13.780 39.4 189.3 GM25440350

440 360 1000 77.9 17.323 14.173 39.4 171.7 GM25440360

440 380 1000 61.3 17.323 14.961 39.4 135.1 GM25440380

440 400 1000 43.7 17.323 15.748 39.4 96.4 GM25440400


NOTESAll rod sizes are nominal. Actual O.D. is approximately 0.5mm (1/32") oversized to allow for clean-up.

THORPLAS-WHITE RODSIndustrial Applications (drinking and potable water bearing applications)

- Specifically developed to operate as a drinking water systemcomponent used in the treatment and distribution of potablewater. It has been approved by the NSF InternationalCertification for NSF/ANSI 61 Drinking Water SystemComponents

Profile

Page 43

Rod Diameter

(mm)

Rod Length

(mm)

Approx.

Weight

(kg)

Rod Diameter

(inches)

Rod Length

(inches)

Approx.

Weight

(lbs.)

Thordon Part

Number

30 1000 1.2 1.181 39.4 2.7 GM20030

40 1000 2.1 1.575 39.4 4.6 GM20040

50 1000 3.2 1.969 39.4 7.0 GM20050

60 1000 4.5 2.362 39.4 9.9 GM20060

70 1000 6.0 2.756 39.4 13.3 GM20070

80 1000 7.8 3.150 39.4 17.2 GM20080

90 1000 9.8 3.543 39.4 21.6 GM20090

100 1000 12.0 3.937 39.4 26.5 GM20100

Page 44

NOTESAll Thordon Stave sizes are nominal and have thickness tolerance of +1.59mm (+1/16”), -0.79mm (-1/32”). Minimum thickness of STAXL must be more than (housing diameter - shaft diameter) divided by 2. Stave ID’s must be finishmachined to achieve correct diametrical running clearance.


SXL STAXL STAVES(1000mm, 39.4 inch lengths)

Marine Applications (propeller shaft bearings)

- Low operating coefficient of friction, high abrasionresistance

Profile

SXL DOVETAIL STAVES(1000mm, 39.4 inch lengths)



Profile

NOTESAll Dovetail Staves have a standard 10 degrees side angle. Stave ID’s must be finish machined to achieve correct diametricalrunning clearance.

US NAVY

Standard No.

Width of Slot

(mm)

Thickness

(mm)

Approx.

Weight

(kg)

US NAVY

Standard No.

Width of Slot

(inches)

Thickness

(inches)

Approx.

Weight

(lbs.)

Thordon

Part

Number

001 43 22.2 1.0 001 1.687 7/8 2.3 F223001

002 46 22.2 1.1 002 1.812 7/8 2.4 F223002

003 49 23.8 1.3 003 1.937 15/16 2.8 F223003

004 52 23.8 1.4 004 2.062 15/16 3.0 F223004

005 56 23.8 1.5 005 2.187 15/16 3.2 F223005

006 59 23.8 1.5 006 2.312 15/16 3.4 F223006

007 70 26.9 2.0 007 2.750 1 1/16 4.5 F223007

008 75 26.9 2.2 008 2.937 1 1/16 4.9 F223008

009 78 30.1 2.5 009 3.062 1 3/16 5.6 F223009

010 81 30.1 2.7 010 3.187 1 3/16 5.9 F223010

Housing

Diameter

(mm)

Shaft

Diameter

(mm) Segment

Thickness

(mm)

Approx.

Weight

(kg)

Shaft

Diameter

(inches)

Housing

Diameter

(inches)

Thickness

(inches)

Approx.

Weight

(lbs.)

Thordon

Part

Number

275 - 320 232 - 288 G22 22 1.1 9.17 - 11.3 10.8 - 12.5 0.866 2.5 F203014

320 - 365 270 - 325 F27 27 1.5 10.6 - 12.7 12.5 - 14.3 1.063 3.4 F203012

365 - 420 304 - 380 E32 32 2.1 11.9 - 14.9 14.3 - 16.5 1.260 4.7 F203010

420 - 480 340 - 430 D42 42 3.1 13.3 - 16.9 16.5 - 18.8 1.653 6.9 F203008

420 - 480 355 - 430 D35 35 2.6 13.9 - 16.9 16.5 - 18.8 1.378 5.8 F203009

480 - 555 400 - 505 C42 42 3.2 15.7 - 19.8 18.8 - 21.8 1.653 7.0 F203006

480 - 555 415 - 505 C35 35 2.7 16.3 - 19.8 18.8 - 21.8 1.378 6.0 F203007

555 - 660 475 - 610 B42 42 3.2 18.7 - 24.0 21.8 - 25.9 1.653 7.0 F203004

555 - 660 490 - 610 B35 35 2.7 19.2 - 24.0 21.8 - 25.9 1.378 6.0 F203005

660 - 790 580 - 740 A42 42 3.6 22.8 - 29.1 25.9 - 31.1 1.653 7.9 F203002

660 - 790 595 - 740 A35 35 3.0 23.4 - 29.1 25.9 - 31.1 1.378 6.7 F203003


XL STAXL STAVES(1000mm, 39.4 inch lengths)



Profile

XL DOVETAIL STAVES(1000mm, 39.4 inch lengths)



Profile

NOTESAll Thordon Stave sizes are nominal and have thickness tolerance of +1.59mm (+1/16”), -0.79mm (-1/32”). Minimum thickness of STAXL must be more than (housing diameter - shaft diameter) divided by 2. Stave ID’s must be finishmachined to achieve correct diametrical running clearance.

NOTESAll Dovetail Staves have a standard 10 degrees side angle. Stave ID’s must be finish machined to achieve correct diametricalrunning clearances.

US NAVY

Standard No.

Width of Slot

(mm)

Thickness

(mm)

Approx.

Weight

(kg)

US NAVY

Standard No.

Width of Slot

(inches)

Thickness

(inches)

Approx.

Weight

(lbs.)

Thordon

Part

Number

001 43 22.2 1.0 001 1.687 7/8 2.3 F222001

002 46 22.2 1.1 002 1.812 7/8 2.4 F222002

003 49 23.8 1.3 003 1.937 15/16 2.8 F222003

004 52 23.8 1.4 004 2.062 15/16 3.0 F222004

005 56 23.8 1.5 005 2.187 15/16 3.2 F222005

006 59 23.8 1.5 006 2.312 15/16 3.4 F222006

007 70 26.9 2.0 007 2.750 1-1/16 4.5 F222007

008 75 26.9 2.2 008 2.937 1-1/16 4.9 F222008

009 78 30.1 2.5 009 3.062 1-3/16 5.6 F222009

010 81 30.1 2.7 010 3.187 1-3/16 5.9 F222010

Housing

Diameter

(mm)

Shaft

Diameter

(mm)

Segment

(mm)

Thickness

(mm)

Approx.

Weight

(kg)

Shaft

Diameter

(inches)

Housing

Diameter

(inches)

Thickness

(inches)

Approx.

Weight

(lbs.)

Thordon

Part

Number

275 - 320 232 - 288 G22 22 1.1 9.17 - 11.3 10.8 - 12.5 0.866 2.5 F202014

320 - 365 270 - 325 F27 27 1.5 10.6 - 12.7 12.5 - 14.3 1.063 3.4 F202012

365 - 420 304 - 380 E32 32 2.1 11.9 - 14.9 14.3 - 16.5 1.260 4.7 F202010

420 - 480 340 - 430 D42 42 3.1 13.3 - 16.9 16.5 - 18.8 1.653 6.9 F202008

420 - 480 355 - 430 D35 35 2.6 13.9 - 16.9 16.5 - 18.8 1.378 5.8 F202009

480 - 555 400 - 505 C42 42 3.2 15.7 - 19.8 18.8 - 21.8 1.653 7.0 F202006

480 - 555 415 - 505 C35 35 2.7 16.3 - 19.8 18.8 - 21.8 1.378 6.0 F202007

555 - 660 475 - 610 B42 42 3.2 18.7 - 24.0 21.8 - 25.9 1.653 7.0 F202004

555 - 660 490 - 610 B35 35 2.7 19.2 - 24.0 21.8 - 25.9 1.378 6.0 F202005

660 - 790 580 - 740 A42 42 3.6 22.8 - 29.1 25.9 - 31.1 1.653 7.9 F202002

660 - 790 595 - 740 A35 35 3.0 23.4 - 29.1 25.9 - 31.1 1.378 6.7 F202003


SXL METRE LONG RODS Industrial Applications (replacement for bronze and plastics)

- Grease-free, low dry coefficient of friction, high abrasionresistance, temperature limits of 100°C (212°F) dry and60°C (140°F) wet, pH range of 5-10

Profile

NOTESAll Rod sizes are nominal. Actual O.D. is at least 1.55mm (1/16”) oversize to allow for machining.

Rod Diameter

(mm)

Rod Length

(mm)

Approx. Weight

(kg)

Rod Diameter

(inches)

Rod Length

(inches)

Approx. Weight

(lbs.)

Thordon Part

Number

20 1000 0.5 0.787 39.4 1.1 F103M020

30 1000 1.0 1.181 39.4 2.2 F103M030

40 1000 1.7 1.575 39.4 3.7 F103M040

50 1000 2.6 1.969 39.4 5.6 F103M050

60 1000 3.6 2.362 39.4 8.0 F103M060

70 1000 4.9 2.756 39.4 10.7 F103M070

80 1000 6.3 3.150 39.4 13.8 F103M080

90 1000 7.9 3.543 39.4 17.4 F103M090

100 1000 9.7 3.937 39.4 21.3 F103M100

110 1000 11.7 4.331 39.4 25.7 F103M110

120 1000 13.8 4.724 39.4 30.4 F103M120

130 1000 16.2 5.118 39.4 35.5 F103M130

140 1000 18.7 5.512 39.4 41.1 F103M140

150 1000 21.4 5.906 39.4 47.0 F103M150

160 1000 24.3 6.299 39.4 53.4 F103M160

170 1000 27.3 6.693 39.4 60.1 F103M170

180 1000 30.6 7.087 39.4 67.3 F103M180

190 1000 34.0 7.480 39.4 74.9 F103M190

200 1000 37.6 7.874 39.4 82.8 F103M200

210 1000 41.4 8.268 39.4 91.2 F103M210

220 1000 45.4 8.661 39.4 99.9 F103M220

230 1000 49.6 9.055 39.4 109.1 F103M230


XL METRE LONG RODSIndustrial Applications (replacement for bronze and plastics)

- Grease-free, low dry coefficient of friction, goodabrasion resistance, temperature limits of 100°C (212°F)dry and 60°C (140°F) wet, pH range of 5-10

Profile

NOTESAll Rod sizes are nominal. Actual O.D. is at least 1.55mm (1/16”) oversize to allow for machining.

Rod Diameter

(mm)

Rod Length

(mm)

Approx. Weight

(kg)

Rod Diameter

(inches)

Rod Length

(inches)

Approx. Weight

(lbs.)

Thordon Part

Number

20 1000 0.5 0.787 39.4 1.1 F102M020

30 1000 1.0 1.181 39.4 2.3 F102M030

40 1000 1.8 1.575 39.4 3.9 F102M040

50 1000 2.7 1.969 39.4 5.9 F102M050

60 1000 3.8 2.362 39.4 8.3 F102M060

70 1000 5.1 2.756 39.4 11.2 F102M070

80 1000 6.6 3.150 39.4 14.5 F102M080

90 1000 8.3 3.543 39.4 18.2 F102M090

100 1000 10.1 3.937 39.4 22.3 F102M100

110 1000 12.2 4.331 39.4 26.8 F102M110

120 1000 14.4 4.724 39.4 31.8 F102M120

130 1000 16.9 5.118 39.4 37.2 F102M130

140 1000 19.5 5.512 39.4 43.0 F102M140

150 1000 22.4 5.906 39.4 49.2 F102M150

160 1000 25.4 6.299 39.4 55.8 F102M160

170 1000 28.6 6.693 39.4 62.9 F102M170

180 1000 32.0 7.087 39.4 70.4 F102M180

190 1000 35.6 7.480 39.4 78.3 F102M190

200 1000 39.4 7.874 39.4 86.6 F102M200

210 1000 43.3 8.268 39.4 95.3 F102M210

220 1000 47.5 8.661 39.4 104.5 F102M220

230 1000 51.8 9.055 39.4 114.1 F102M230


SXL SCREW CONVEYORBEARINGS(Type 226) - Circular Top

Industrial Applications (forestry, sewage & waste water treatment, mining and otherindustrial applications)- High abrasion resistance, low coefficient of friction, excellentself-lubricating qualities for dry or wet applications

Profile

SXL SCREW CONVEYORBEARINGS(Type 216) - Flat Top

Industrial Applications (forestry, sewage & waste water treatment, mining and otherindustrial applications)- High abrasion resistance, low coefficient of friction, excellentself-lubricating qualities for dry or wet applications

Profile

Shaft

Diameter

(mm) Style

Approx.

Weight

(kg)

Shaft

Diameter

(inches) Style

Approx.

Weight

(lbs.)

Thordon

Part

Number

38 Circular Top 0.1 1 1/2 Circular Top 0.1 F163002

51 Circular Top 0.1 2 Circular Top 0.2 F163004





Shaft

Diameter

(mm) Style

Approx.

Weight

(kg)

Shaft

Diameter

(inches) Style

Approx.

Weight

(lbs.)

Thordon

Part

Number

38 Flat Top 0.1 1 1/2 Flat Top 0.2 F173002

51 Flat Top 0.1 2 Flat Top 0.3 F173004





XL SCREW CONVEYORBEARINGS (Type 226) - Circular Top

Industrial Applications (forestry, sewage & waste water treatment, mining and otherindustrial applications)

- High abrasion resistance, low coefficient of friction, goodself-lubricating qualities for dry or wet applications

Profile

XL SCREW CONVEYORBEARINGS(Type 216) - Flat Top

Industrial Applications (forestry, sewage & waste water treatment, mining and otherindustrial applications)

- High abrasion resistance, low coefficient of friction, goodself-lubricating qualities for dry or wet applications

Profile

Shaft

Diameter

(mm) Style

Approx.

Weight

(kg)

Shaft

Diameter

(inches) Style

Approx.

Weight

(lbs.)

Thordon

Part

Number






Shaft

Diameter

(mm) Style

Approx.

Weight

(kg)

Shaft

Diameter

(inches) Style

Approx.

Weight

(lbs.)

Thordon

Part

Number








SXL SHEETSIndustrial Applications (sewage treatment, steel industry, forestry & many others)

- Available in strip or sheet form, molded to exactapplication requirement- May be screwed in place or bonded using TG-75

Profile

NOTES All Thordon sheet sizes are nominal and have a thickness tolerance of +1.59mm (+1/16”) -0.79mm (-1/32”).

THORPLAS-BLUE SHEETS Industrial Applications (sewage treatment, steel industry, forestry & many others)

- Available in strip or sheet form, molded to exact application requirement- May be screwed in place

Width

(mm)

Length

(mm)

Thickness

(mm)

Approx.

Weight

(kg)

Width

(inches)

Length

(inches)

Thickness

(inches)

Approx.

Weight

(lbs.)

Thordon

Part

Number

300 600 3 0.6 12 24 0.118 1.4 F123002

300 600 5 1.2 12 24 0.198 2.7 F123004

300 600 8 2.0 12 24 0.315 4.3 F123005

300 600 10 2.5 12 24 0.394 5.4 F123008

300 600 12 3.0 12 24 0.472 6.5 F123010

300 600 15 3.7 12 24 0.591 8.2 F123012

300 600 20 5.0 12 24 0.787 10.9 F123016

300 600 25 6.2 12 24 0.984 13.6 F123018

300 600 30 7.4 12 24 1.181 16.3 F123020

300 600 35 8.6 12 24 1.378 19.0 F123022

300 600 40 9.9 12 24 1.575 21.7 F123024

300 600 45 11.1 12 24 1.772 24.4 F123026

300 600 50 12.4 12 24 1.969 27.2 F123028

300 3000 3 3.2 12 118 0.118 7.1 F153002

300 3000 5 5.4 12 118 0.198 11.9 F153004

300 3000 10 10.7 12 118 0.394 23.6 F153008

300 3000 12 12.9 12 118 0.472 28.3 F153010

300 3000 15 16.1 12 118 0.591 35.4 F153012

300 3000 20 21.5 12 118 0.787 47.2 F153016

1000 1000 5 6.0 39.4 39.4 0.198 13.2 F133002

1000 1000 10 12.0 39.4 39.4 0.394 26.3 F133004

1000 1000 15 17.9 39.4 39.4 0.591 39.4 F133006

1000 1000 20 23.9 39.4 39.4 0.787 52.5 F133008

1000 1000 25 29.9 39.4 39.4 0.984 65.7 F133010

1000 1000 35 41.8 39.4 39.4 1.378 92.0 F133012

1000 1000 50 59.7 39.4 39.4 1.969 131.4 F133014

Width (mm)

Thickness

(mm)

Length

(mm)

Approx.

Weight

(kg)

Width

(inches)

Length

(inches)

Approx.

Weight

(lbs.)

Thordon

Part

Number

290 45 1000.0 20.5 11.417 39.4 45.2 G12290045

360 70 1000.0 38.6 14.173 39.4 85.0 G12360070


XL SHEETSIndustrial Applications (sewage treatment, steel industry, forestry & many others)


Profile


Width

(mm)

Length

(mm)

Thickness

(mm)

Approx.

Weight

(kg)

Width

(inches)

Length

(inches)

Thickness

(inches)

Approx.

Weight

(lbs.)

Thordon

Part

Number

300 600 3 0.6 12 24 0.118 1.4 F122002

300 600 5 1.2 12 24 0.198 2.7 F122004

300 600 8 2.0 12 24 0.315 4.3 F122005

300 600 10 2.5 12 24 0.394 5.4 F122008

300 600 12 3.0 12 24 0.472 6.5 F122010

300 600 15 3.7 12 24 0.591 8.2 F122012

300 600 20 5.0 12 24 0.787 10.9 F122016

300 600 25 6.2 12 24 0.984 13.6 F122018

300 600 30 7.4 12 24 1.181 16.3 F122020

300 600 35 8.6 12 24 1.378 19.0 F122022

300 600 40 9.9 12 24 1.575 21.7 F122024

300 600 45 11.1 12 24 1.772 24.4 F122026

300 600 50 12.4 12 24 1.969 27.2 F122028

300 3000 3 3.2 12 118 0.118 7.1 F152002

300 3000 5 5.4 12 118 0.198 11.9 F152004

300 3000 10 10.7 12 118 0.394 23.6 F152008

300 3000 12 12.9 12 118 0.472 28.3 F152010

300 3000 15 16.1 12 118 0.591 35.4 F152012

300 3000 20 21.5 12 118 0.787 47.2 F152016

1000 1000 5 6.0 39.4 39.4 0.198 13.2 F132002

1000 1000 10 12.0 39.4 39.4 0.394 26.3 F132004

1000 1000 15 17.9 39.4 39.4 0.591 39.4 F132006

1000 1000 20 23.9 39.4 39.4 0.787 52.5 F132008

1000 1000 25 29.9 39.4 39.4 0.984 65.7 F132010

1000 1000 35 41.8 39.4 39.4 1.378 92.0 F132012

1000 1000 50 59.7 39.4 39.4 1.969 131.4 F132014


REGULAR SHEETSIndustrial Applications (sewage treatment, steel industry, forestry & many others)


Profile


Width

(mm)

Length

(mm)

Thickness

(mm)

Approx.

Weight

(kg)

Width

(inches)

Length

(inches)

Thickness

(inches)

Approx.

Weight

(lbs.)

Thordon

Part

Number

300 600 3 0.6 12 24 0.118 1.4 F121002

300 600 5 1.2 12 24 0.198 2.7 F121004

300 600 8 2.0 12 24 0.315 4.3 F121005

300 600 10 2.5 12 24 0.394 5.4 F121008

300 600 12 3.0 12 24 0.472 6.5 F121010

300 600 15 3.7 12 24 0.591 8.2 F121012

300 600 20 5.0 12 24 0.787 10.9 F121016

300 600 25 6.2 12 24 0.984 13.6 F121018

300 600 30 7.4 12 24 1.181 16.3 F121020

300 600 35 8.6 12 24 1.378 19.0 F121022

300 600 40 9.9 12 24 1.575 21.7 F121024

300 600 45 11.1 12 24 1.772 24.4 F121026

300 600 50 12.4 12 24 1.969 27.2 F121028

300 3000 3 3.2 12 118 0.118 7.1 F151002

300 3000 5 5.4 12 118 0.198 11.9 F151004

300 3000 10 10.7 12 118 0.394 23.6 F151008

300 3000 12 12.9 12 118 0.472 28.3 F151010

300 3000 15 16.1 12 118 0.591 35.4 F151012

300 3000 20 21.5 12 118 0.787 47.2 F151016

1000 1000 5 6.0 39.4 39.4 0.198 13.2 F131002

1000 1000 10 12.0 39.4 39.4 0.394 26.3 F131004

1000 1000 15 17.9 39.4 39.4 0.591 39.4 F131006

1000 1000 20 23.9 39.4 39.4 0.787 52.5 F131008

1000 1000 25 29.9 39.4 39.4 0.984 65.7 F131010

1000 1000 35 41.8 39.4 39.4 1.378 92.0 F131012

1000 1000 50 59.7 39.4 39.4 1.969 131.4 F131014


SPECIALTY ITEMS

NOTES Speciality Items have a different discount, contact Customer Service at Thordon *Thor-Coat shaft coating to be applied by a Thordon Trained Specialist.

NOTESTolerance on thickness for Thor-Tape: 0.4mm (0.017”) - 1.3mm (0.053”) thick @ +/-0.05mm (+/-0.002”)

1.6mm (0.063”) - 3.2mm (0.125”) thick @ +/-0.08mm (+/-0.003”)

SXL THOR-TAPE Sold per 305mm (1ft.) linear lengths, minimum order 3050mm (10ft.) lengthIndustrial and Marine Applications

- Wear strips can be easily fabricated in the field by cutting SXL Thor-Tape to therequired size and bonding in place- Thor-Tape may be used as a thin re-lining material for flat or curved surfaces

Width

(mm)

Thickness

(mm)

Approx.

Weight

(kg)

Width (inch-

es)

Thickness

(inches)

Approx.

Weight

(lbs.)

Thordon

Part

Number

152 0.4 0.4 6 0.017 0.8 F2506017

152 0.7 0.6 6 0.027 1.3 F2506027

152 0.8 0.6 6 0.033 1.4 F2506033

152 1.1 0.6 6 0.043 1.4 F2506043

152 1.3 0.8 6 0.053 1.7 F2506053

152 1.6 1.0 6 0.063 2.1 F2506063

152 3.2 1.8 6 0.125 4.0 F2506125

229 0.4 0.5 9 0.017 1.0 F2509017

229 0.7 0.8 9 0.027 1.8 F2509027

229 0.8 0.8 9 0.033 1.8 F2509033

229 1.1 0.9 9 0.043 1.9 F2509043

229 1.3 1.0 9 0.053 2.3 F2509053

229 1.6 1.3 9 0.063 2.8 F2509063

229 3.2 2.4 9 0.125 5.3 F2509125

305 0.4 0.7 12 0.017 1.5 F2512017

305 0.7 1.2 12 0.027 2.6 F2512027

305 0.8 1.3 12 0.033 2.8 F2512033

305 1.1 1.3 12 0.043 2.9 F2512043

305 1.3 1.5 12 0.053 3.4 F2512053

305 1.6 2.0 12 0.063 4.3 F2512063

305 3.2 3.6 12 0.125 8.0 F2512125

Description Thordon Part Number

TG-75 Adhesive cartridge, 450ml (15.2 US. fl oz.) - Part A and BNotes: Expiry date is 12 months from date of shipment, if stored at room temperatureExpiry date is 24 months from date of shipment, if stored at 0 deg. C (32 deg. F) H1201TG75

TG-75 Manual Dispensing Gun H1201TG75D

TG-75 Static Mixing Nozzle H1201TG75M

Thor-Coat Shaft Coating* - 4.78 L (1.26 U.S. Gal)

Full Kit - Coverage: 2.4 m2 (25 sq. ft.)

Supplied in two parts and includes brush, mixer and film thickness gauge.

Please check with Thordon for Marine Class Society Approvals and application evaluation. H1205TG20F

Thor-Coat Shaft Coating* - 2.58 L (0.68 U.S. Gal)

Half Kit - Coverage: 1.2 m2 (13 sq. ft.)

Supplied in two parts and includes brush, mixer and film thickness gauge.

Please check with Thordon for Marine Class Society Approvals and application evaluation. H1205TG20H

Thor-Coat Shaft Coating* - 0.203 L (6.9 oz.)

Repair Kit - Coverage: 0.102 m2 (1.09 sq. ft.)

Supplied in two parts and includes spatula and small brush.

Please check with Thordon for Marine Class Society Approvals and application evaluation. H1205TG20RK

Toolbit with profile to machine 3 mm (0.118") radius groove with 7 mm (0.276") radius edge F99TB003

Toolbit with profile to machine 4 mm (0.158") radius groove with 7 mm (0.276") radius edge F99TB004


TG100 SEALMarine Applications

Designed for 3.375” to 12” (86mm to 305mm) shaft vesselsoperating in either clean or abrasive-laden waters includingworkboats, harbour tugs, offshore supply vessels, yachts,ferries, fishing trawlers and self-propelled dredgers. Must beinstalled by an authorized TG100 installer. TG100 seals aresupplied fully finished (FF) ready to install based on therequested shaft diameter. The seals we supply will not fit arange unless specifically ordered.

Profile

Size No.

Shaft Diameter

(mm)

Shaft

Diameter

(inches)

00 a 85.70 - 88.90 3.375 - 3.500

b 88.91 - 92.10 3.501 - 3.625

c 92.11 - 95.30 3.626 - 3.750

d 95.31 - 98.42 3.751 - 3.875

01 a 98.44 - 101.60 3.875 - 4.000

b 101.61 - 104.78 4.001 - 4.125

c 104.79 - 108.00 4.126 - 4.250

d 108.01 - 111.13 4.251 - 4.375

e 111.14 - 114.30 4.376 - 4.500

f 114.31 - 117.51 4.501 - 4.625

02 a 117.52 - 120.65 4.626 - 4.750

b 120.66 - 123.83 4.751 - 4.875

c 123.84 - 127.00 4.876 - 5.000

d 127.01 - 130.18 5.001 - 5.125

e 130.19 - 133.35 5.126 - 5.250

f 133.36 - 136.53 5.251 - 5.375

g 136.54 - 139.70 5.376 - 5.500

h 139.71 - 142.88 5.501 - 5.625

i 142.89 - 146.06 5.626 - 5.750

03 a 146.07 - 149.23 5.751 - 5.875

b 149.24 - 152.40 5.876 - 6.000

c 152.41 - 155.56 6.001 - 6.125

d 155.57 - 158.75 6.126 - 6.250

e 158.76 - 161.93 6.251 - 6.375

f 161.94 - 165.10 6.376 - 6.500

g 165.11 - 168.30 6.501 - 6.625

h 168.31 - 171.45 6.626 - 6.750

i 171.46 - 174.64 6.751 - 6.875


TG100 SEALMarine Applications

Designed for 3.375” to 12” (86mm to 305mm) shaft vesselsoperating in either clean or abrasive-laden waters includingworkboats, harbour tugs, offshore supply vessels, yachts,ferries, fishing trawlers and self-propelled dredgers. Must beinstalled by an authorized TG100 installer. TG100 seals aresupplied fully finished (FF) ready to install based on therequested shaft diameter. The seals we supply will not fit arange unless specifically ordered.

Profile

Size No.

Shaft Diameter

(mm)

Shaft Diameter

(inches)

04 a 174.65 - 177.80 6.876 - 7.000

b 177.81 - 180.98 7.001 - 7.125

c 180.99 - 184.15 7.126 - 7.250

d 184.16 - 187.33 7.251 - 7.375

e 187.34 - 190.50 7.376 - 7.500

f 190.51 - 193.68 7.501 - 7.625

g 193.69 - 196.85 7.626 - 7.750

h 196.86 - 200.00 7.751 - 7.875

i 200.01 - 203.19 7.876 - 8.000

05 a 203.20 -209.55 8.001 - 8.250

b 209.56 - 215.90 8.251 - 8.500

c 215.91 - 222.25 8.501 - 8.750

d 222.26 - 228.60 8.751 - 9.000

06 a 228.61 -234.95 9.001 - 9.250

b 234.96 - 241.30 9.251 - 9.500

c 241.31 - 247.65 9.501 - 9.750

d 247.66 - 254.01 9.751 - 10.000

07 a 254.02 - 260.35 10.001 - 10.250

b 260.36 - 266.70 10.251 - 10.500

c 266.71 - 273.05 10.501 - 10.750

d 273.06 - 279.41 10.751 - 11.000

08 a 279.42 - 285.75 11.001 - 11.250

b 285.76 - 292.10 11.251 - 11.500

c 292.11 - 298.45 11.501 - 11.750

d 298.46 - 304.80 11.751 - 12.000

Page 56

STANDARD TERMS AND CONDITIONS

NOTICE: ALL SALES BY THORDON BEARINGS INC. ('TBI'') ARE SUBJECT TO AND CONDITIONED UPON PURCHASOR'S ACCEPTANCE OF THE TERMS CONTAINED IN THIS DOCUMENT Payment

(a) Standard Terms. The terms of payment are net sixty (60) days from the date of TBI's invoice(s) as delivered by TBI to the Buyer pursuant to this Contract. TBI reserves the right to restrict the terms of payment or to require paymentprior to the time of shipment, if, in the opinion of TBI, acting reasonably, the Buyer's financial condition or other circumstances do not warrant shipment on the terms originally specified in this Contract.(b) Address. All payments to be made by the Buyer pursuant to TBI's invoice shall be delivered to TBI at TBI's address for service as set forth herein (or to such other place as TBI may, from time to time, direct in writing). (c) Deductions and Partial Payments. The Buyer acknowledges and agrees that any and all payments shall be made without any deductions for any reason whatsoever unless expressly provided herein, and no partial payment by theBuyer which is accepted by TBI shall be considered as anything other than a partial payment on account of the balance owing and shall not prejudice TBI's right to otherwise recover any amounts owing thereafter.(d) Overdue Account. If the Buyer fails to make payment pursuant to the terms as specified in Subsection 1(a), above, the Buyer shall pay interest at the rate of 1-1/2% per month (18% per annum) on all overdue invoices. In addition toall other remedies afforded by law, TBI may cancel this Buyer's purchase order or sell all or any part of the undelivered goods without notice at public or private sale, holding the Buyer responsible for any deficiency or bill all or any part of theundelivered goods to the Buyer as of the contractual dates of delivery.

Delivery (a) Designated Location and Risk of Loss. Unless expressly agreed otherwise in writing between TBI and the Buyer, the Goods to be sold by TBI to the Buyer as provided under this Contract, shall be Air Shipments: CPT named place ofdestination; Sea Freight: CFR named place of destination in respect of the delivery of such Goods to the Buyer's plant (or to such other place as the Buyer may, from time to time, direct in writing). The Buyer agrees that title for the Goodsshall automatically be deemed to pass from TBI to the Buyer immediately when such Goods are handed over to the first carrier for air shipments or once goods are loaded on the vessel for sea freight shipments, without notice. The Buyeragrees to pay all costs of transportation, or to reimburse TBI for any expenses incurred in transporting the Goods to the Buyer's place of business or other location as directed by the Buyer. (b) Part Shipments. The Buyer agrees that TBI may, in its sole discretion, part ship quantities of the Goods, unless specifically requested otherwise in writing by the Buyer prior to the commencement of any work to be performed by TBIunder Buyer's purchase order. Each part shipment will be invoiced individually and must be paid pursuant to the terms as specified in Subsection 1(a), above. (c) Force Majeure. TBI shall not be responsible or liable for any delay, non-delivery and/or default directly or indirectly resulting from and/or contributed to, in whole or in part, by any foreign or domestic embargos, seizures, acts of God,insurrections, war an/or continuance of war, or the adoption or enactment of any law, ordinance, regulation, ruling or order directly or indirectly interfering with or rendering more burdensome the production, delivery or payment hereunder, alsolack of the usual means of transportation, fires, floods, explosions, strikes or other accidents or contingencies beyond TBI's control, either of the foregoing nature or of any other kind, nature or description considered as "Force Majeure" inTBI's or its suppliers' plants or elsewhere otherwise affecting transportation or production of the Goods or any parts used in or in connection with its production. In the event that any one or more deliveries hereunder is suspended or delayedby reason of any one or more of the occurrences or contingencies, as aforesaid, other than TBI's own negligence, any and all deliveries so suspended or delayed shall be made after such disabilities have ceased to exist and nothing hereincontained shall be construed as lessening in any event the full amount of the Goods herein purchased and sold, but only as deferring delivery and payment in the events and to the extent herein provided for.(d) Inspection. Upon the arrival of the Goods at the Buyer's plant (or elsewhere as specified in Subsection 2(a), above), the Buyer shall have the privilege of examining and inspecting the same before accepting delivery pursuant toSubsection 2(e), below. Such inspection shall be made within forty-eight (48) hours after the arrival of such Goods at their destination.(e) Acceptance. Notwithstanding anything to the contrary herein, the Buyer agrees that if it retains the Goods in its possession or control for a period in excess of two (2) days after delivery of them at its place of business or elsewhere asspecified in Subsection 2(a), above, this shall automatically constitute and be deemed an irrevocable acceptance by the Buyer of the Goods and the delivery thereof, and a waiver by it of any and all claims that the Goods do not conform tothis Contract, unless the Buyer notifies TBI in writing of any defect or non-conformity pursuant to the provisions of Subsection 3(a), below. The Buyer agrees that if it purchases the Goods subject to these terms and conditions, such accept-ance satisfies all of TBI's obligations and after acceptance the Buyer shall have no remedy against TBI whatsoever, nor may the Buyer revoke its acceptance for any reason whatsoever.

Return Policy(a) Notification. Pursuant to the provisions of Subsection 2(e) above, if the Buyer notifies TBI that any of the Goods delivered to it under this Contract are defective in material or do not comply with the requirements of this Contract withinthe stated time period therein, the Buyer shall make a claim therein, in sufficient detail, either for a return of such Goods or for a reduction in the agreed price of the Goods.. In the event that the Buyer shall fail to make such claim within thetime specified, it shall thereupon be liable for the payment of the full amount of the agreed price for the Goods so delivered to it. The return shipment, if any, is to be made by the Buyer to TBI at the address of TBI's plant (or to such otherplace as TBI may direct in writing), freight charges prepaid and only after the Buyer receives written authorization along with a RGA (Return Goods Authorization) number from TBI.

Limited Warranty(a) Basic Terms. TBI provides a limited warranty on the Goods of its own manufacture sold by it to the Buyer thereof, against defects of material and workmanship (the "Limited Warranty").(b) Coverage. This Limited Warranty covers the repair or replacement or the refund of the purchase price, as TBI may elect, of any defective products regarding which, upon discovery of the defect, the Buyer has given immediate writtennotice. TBI does NOT warrant the merchantability of its product and does NOT make any warranty express or implied other than the warranty contained herein.(c) Third Party Products. Accessories, equipment and parts not manufactured by TBI are warranted or otherwise guaranteed only to the extent and in the manner warranted or guaranteed to TBI by the actual manufacturer, and then only tothe extent TBI is able to enforce such warranty or guarantee.(d) Limited Liability. TBI's liability for any and all claims, damages, losses and injuries arising out of or relating to its performance or breach of any contract of sale of goods and the manufacture, sale delivery, re-sale, repair, or use of anygoods, shall NOT exceed the agreed price of such Goods. The Buyer's remedy shall be at TBI's option, the replacement or repair of the Goods. This shall be the Buyer's sole, exclusive and only remedy against TBI. IN NO EVENT SHALLTBI BE LIABLE FOR INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS OF PROFITS, BUSINESS, GOODWILL, INCURRING OF MACHINERY DOWNTIME, DESTRUCTION OR LOSSOF ANY CAPITAL GOODS, LIABILITY FOR PERSONAL INJURY, DEATH, PROPERTY DAMAGE AND ANY OTHER TYPE OF DAMAGES WHETHER SIMILAR TO OR DIFFERENT FROM THIS LISTING.(e) Latent Defects. In cases of defects in materials or workmanship or defects arising from the selection of material or processes of manufacturer, such defects must be apparent in the Goods within three (3) months, after delivery andacceptance of the Goods to the Buyer.(f) Exclusions. TBI shall, as to each aforesaid defect, be relieved of all obligations and liability under this Limited Warranty if:1. The Goods are operated with any accessory, equipment or part not specifically approved by TBI and not manufactured by TBI or to TBI's design and specifications, unless the Buyer furnishes reasonable evidence that such installation wasnot a cause of the defect; provided, that this provision shall not apply to any accessory, equipment or part, the use of which does not effect the safety of the Goods;2. The Goods shall not be operated or maintained in accordance with TBI's written instructions as delivered to the Buyer, at any time or from time to time, unless the Buyer furnishes reasonable evidence that such operation or maintenancewas not a cause of the defect;3. The Goods shall not be operated or maintained under normal industry use, unless the Buyer furnishes reasonable evidence that such operation was not a cause of the defect;4. The Goods shall have been repaired, altered or modified without TBI's written approval or, if the Goods shall have been operated subsequent to its involvement in an accident or breakdown, unless the Buyer furnishes reasonable evidencethat such repair, alteration, modification, operation, accident or breakdown was not a cause of the defect; provided, however, that this limitation insofar as it relates to repairs, accidents and breakdowns, shall NOT be applicable to routinerepairs or replacements or minor accidents or minor breakdowns which normally occur in the operation of a machine, if such repairs or replacements are made with suitable materials and according to standard practice and engineering;5. The Buyer does not submit reasonable proof to TBI that the defect is due to a material embraced within TBI's Limited Warranty hereunder.(g) Warranty Term. This Limited Warranty made by TBI contained in these Terms and Conditions, or contained in any document given in order to carry out the transactions contemplated hereby, shall continue in full force and effect for thebenefit of the Buyer, save and except, no warranty claim may be made or brought by the Buyer after the date which is twelve (12) months following delivery and acceptance of the Goods pursuant to this Contract.(h) Expiration and Release. After the expiration of this Limited Warranty's period of time, as aforesaid, TBI shall be released from all obligations and liabilities in respect of such warranty made by TBI and contained in this Contract or in anydocument given in order to carry out the transactions contemplated hereby.

Buyer-Distributor Commission SharingIf the Buyer is also designated by TBI as an "Authorized Thordon Distributor/Agent", the applicable TBI commission sharing policy forms an integral and binding part of the terms and conditions of this Contract.

Restrictive Covenants (a) Confidentiality. At any time during the term of completion of Buyer's purchase order, or thereafter, the Buyer shall keep private and shall not disclose, divulge or communicate, in any manner whatsoever, to any person, corporation orentity, any and all confidential information obtained by it relating to TBI, its affiliates, subsidiaries, associated companies, except such information which:(i) prior to the date hereof was already in the possession of the Buyer, as demonstrated by written records;(ii) is generally available to the public, other than as a result of a disclosure by the Buyer; (iii) is disclosed with the written consent of TBI;(iv) is made available to the Buyer on a non-confidential basis from a source other than TBI, or its designated representatives; or(v) is disclosed pursuant to court order, other legal compulsion or as required by law.For the purposes of this Section, "confidential information" means all data and information, including information relating to trade secrets, skill, technical information, know-how, processes, techniques, drawings, pictures, books, brochures, catalogues, records, schematics and schedules whatsoever of every nature and information regarding the businesses of the parties, which, when disclosed by TBI, is designated as confidential.(b) Non-Disclosure. The Buyer further agrees that confidential information, as aforesaid, will be disclosed only to those of its employees and designated representatives and its advisors who need to know such information for the purposesof evaluating and implementing the transaction contemplated hereby. Notwithstanding the foregoing provisions of this Section 6, the obligation to maintain the confidentiality of such information will not apply to the extent that disclosure ofsuch information is required in connection with governmental or other applicable filings relating to the transactions hereunder, provided that, in such case, unless TBI otherwise agrees, the Buyer will, if possible, request confidentiality inrespect of such governmental or other filings. If the transactions contemplated hereby are not consummated for any reason, the Buyer will return forthwith, without retaining any copies thereof, all information and documents obtained fromTBI.

Conflict with other Documents(a) Superceding Agreement. The Buyer and TBI agree that the provisions of these standard terms and conditions and Schedule "A" (if attached hereto as specified in Section 5, above), shall constitute the entire agreement between theBuyer and TBI pertaining to the subject matter of Buyer's purchase order and it supersedes all prior agreements, understandings, negotiations and discussions, whether oral or written.

Applicable Laws and JurisdictionOntario Contract This Contract shall be governed by and construed in accordance with the laws of the Province of Ontario and the laws of Canada applicable therein, and each of the parties hereto irrevocable attorns to the jurisdictions ofthe courts of the Province of Ontario.

Dispute Resolution(a) Arbitration. In the event that any dispute arises between the Buyer and TBI with regard to any of the provisions, including but not limited to any disputes arising under the provisions of Subsection 3(a), above, or the performance of the

terms and conditions hereof by either of them (the "Dispute'), such Dispute shall be settled by arbitration to be conducted in the City of Toronto, Ontario, Canada and shall be conducted pursuant to the provisions of The Arbitrations Act ofOntario. Either the Buyer or TBI may submit a Dispute to arbitration; provided that the party desiring to initiate such arbitration (the "Claiming Party") gives the other party (the "Responding Party") written notice of its election to commencearbitration (the "Arbitration Notice"). The arbitrator shall be selected following the receipt by the Responding Party of the Arbitration Notice, as follows: (i) The Claiming Party and the Responding Party shall endeavour to agree upon a single arbitrator; provided that if the Claiming Party and the Responding Party cannot agree on a single arbitrator within 15 days of receipt by the RespondingParty of the Arbitration Notice, the Claiming Party and the Responding Party shall each provide a list of two arbitrators who have knowledge and experience in the matter in dispute to each other and to a Judge of the Supreme Court ofOntario in the said province who shall name the single arbitrator; and if any party fails to submit its list of two names as provided in this paragraph within thirty (30) days of receipt by the Responding Party of the Arbitration Notice, the partywho submitted a list pursuant to this paragraph, may request the Judge to appoint an arbitrator from the names on the list submitted by it herein.

Insurance(a) Coverage. During the continuance of Buyer's purchase order and until full payment for all the Goods therein mentioned have been made by the Buyer, the Buyer shall keep the Goods insured against loss by fire, or loss during shipping,with loss, if any, payable to TBI as its interest may appear. Such insurance shall be in the sum of not less than one million dollars in U.S. funds (US$1,000,000.00)and the Buyer shall promptly pay all premiums due or to become due on suchinsurance within such periods of time as are necessary to keep the said insurance in full force and effect. In the event of failure of the Buyer to obtain and to keep such insurance in full force e and effect, TBI may take out such insurance andpay any premium due or to become due thereon that may remain unpaid and such amount so paid shall be repaid to TBI by the Buyer.

General (a) Binding. This Contract binds the parties and their respective successors and permitted assigns.(b) Invalidity. The invalidity of any portion of this Contract shall not affect the validity or enforceability of any other portion of it. (c) Assignment. This Contract is not assignable by the Buyer or TBI without the other party's prior consent in writing. (d) Mutual Consent. No subsequent variation or amendment of the provisions herein shall have any effect, unless made in writing and signed by the Buyer and TBI (or by their duly authorized agents).(e) Counterparts. This Contract may be executed in any number of counterparts and by the Buyer and TBI in separate counterparts, each of which when so executed shall be deemed to be an original and all of which taken shall constituteone and the same instrument.(f) Facsimile Transmission. The Buyer and TBI agree that this Contract may be transmitted by facsimile (or such similar device) and that the reproduction of signatures by facsimile or such similar device will be treated as binding as if origi-nals, and each of the Buyer and TBI hereto undertakes to provide to the other party hereto with a copy of this Contract bearing original signatures forthwith by courier.

3225 Mainway, Burlington, Ontario L7M 1A6 Canada Tel: +1.905.335.1440 Fax: +1.905.335.4033

www.ThordonBearings.com

T H O R D O N B E A R I N G S I N C.

ZERO POLLUTION | HIGH PERFORMANCE | BEARING & SEAL SYSTEMS

A Thomson-Gordon Group Company - Innovating since 1911