2015 HH group brochure-email

www.hh-gltd.com2014.06

Honghua Group Ltd.,

Jinniu District, Chengdu, Sichuan, ChinaPost code: 610036Tel: +86-28-8297 1600Fax: +86-28-8297 1793Web: www.hh-gltd.comE-mail: [email protected]

Address: No.99 East Road, Information Park,

HONGHUA GROUP

Golden Coast Equipment FZE (GCE)Add: P.O.Box. 261868 Jebel Ali, Dubai, U.A.E.Tel: +971-4-8807066Fax: +971-4-8807068E-mail: [email protected]

[email protected]

Honghua America, LLC (HHA)Add: 8300 Mchard Road, Houston, TX, 77053, USATel: +1-832-4488 100Fax: +1-832-4488 101E-mail: [email protected]: www.hh-america.com

Sichuan Honghua Petroleum Equipment Co., Ltd.Add: South 2, Zhongshan Road, Guanghan,

Sichuan, ChinaPost code: 618300Tel: +86-838-5151 507Fax: +86-838-5151 724Web: www.hhcp.com.cnE-mail: [email protected]

Honghua International Co., Ltd.Add: No.99, East Road, Information Park, Jinniu

District, Chengdu, Sichuan,ChinaPost code: 610036Tel: +86-28-8297 1600Fax: +86-28-8297 1793E-mail: [email protected]: www.hhic.com

Sichuan Honghua Electric Co., Ltd. Add: No.99, East Road, Information Park, Jinniu

District, Chengdu, Sichuan, ChinaPost code: 610036Tel: +86-28-8601 5272Fax: +86-28-8601 5272Web: www.ht-cp.comE-mail: [email protected]

[email protected]

Shanghai Honghua Offshore Oil & Gas Equipment Co., Ltd.Add: 3/F, No.11 building, 27 Xinjinqiao Road,

Pudong, Shanghai, P.R. China

Tel: +86-21-5190 1600Fax: +86-21-5190 1620E-mail: [email protected]

Post code: 201206

Egyptian Petroleum HH Rig Manufacturing Shareholder CompanyAdd: Factory: Suez, Sukhna Road, K.41Cairo Office: #19, St. No. 292, New Maadi,

Cairo, Egypt Tel: +20-02-2703 6328-27Fax: +20-02-2703 6396E-mail: [email protected]

Honghua Russia, Ltd.Add: Room B1, Building 15, No. 32, Kirovogradskaya street, Moscow, RussiaIndex: 117534Tel: +7 (495) 315 26 88Fax: +7 (495) 315 27 88E-mail: [email protected]

Honghua Venezuela Add: Altamira con Los Palos Grandes, Torres

Cavendes, Oficina 409,Chacao,Caracas, Venezuela Index: 03056

Tel: +58-212-2849 209 +58-424-9155 066Fax:+58-212-2844 831E-mail: [email protected] [email protected]

European OfficeAdd: Rolna Street 195, 02-729 Warsaw, Poland Post Code: 02-729Tel: +86-13908074011 +86-13880905352E-mail: [email protected]

[email protected]

Add: Emerson 106, piso 10, Polanco, Distrito Federal, México.Phone: 52 55 6547 1059Cell: 52 044 55 4664 3398Email: [email protected]: www.hh-america.com

Mexico Office

Honghua Kazakhstan Add: No.40, Balibda Street, Awsij District,

Alma Ata, Kazakhstan Zip Code: 050042Tel/Fax: +7-727-2936 40324-hour Tel: +7-777-8333 866E-mail: [email protected]

[email protected]

India OfficeAdd: 1903/04,19th Floor, D Wing, Lake Lucerne,

Powai, Mumbai, 400076Tel: +91-9650361281 +86-15928601871E-Mail: [email protected]

Indonesia OfficeAdd: Aribimo Sentral 3rd fl,JL.Lend.H.R. Rasuna Said

Blok X-2 kav.5, Jakarta Post code: 12950Tel: +86-18702800769E-Mail: [email protected]

Pakistan OfficeAdd: House No.12-E, Street No.13, Sector F-7/2,

IslamabadTel: +86-13908099085E-mail: [email protected]

Central Asia OfficeAdd: Office 5 C 05 No. 107-B, Amir Temur Street,

Tashkent, Uzbekistan.Tel: +86-15883699540 +99890-9202237 E-mail: [email protected]

[email protected]

Colombia OfficeAdd: World Trade Center, Calle 100#8a-55

Of.518, Bogota, ColombiaTel: +57-1-6423 200 Fax: +57-1-6423 203E-mail: [email protected]

Azerbaijan OfficeAdd: Nasib bey Yusifbeyli str,88 Apt.3th floorTel: +994-50-466 8655Fax:+994-12-440 7116Email：[email protected]

[email protected]

Subsidiaries

02-17 18-40 41-46 47-50 51-70 71-76 77-80

ContentsGroup Introduction Land Rigs Offshore Equipment

Integrated Shale Gas Exploiting Solution Key Components Electrical Control System Oil Equipment

02 Group Introduction04 Subsidiaries06 Sales Achievements (partial)10 Manufacture Capacity12 Research Capacity14 Qualification Certification15 Quality Assurance16 Services and Training

20 AC VFD (DBS) Rig Series22 DC (SCR) Rig Series24 RT Independently Driven (LDB) Rig Series26 Mechanical Rig Series28 Truck-Mounted Rig Series30 Arctic Rig32 Desert Fast Moving Rig34 Coiled Tubing Equipment36 Single Series Drilling Rigs38 1500HP Beyond Rig39 Helicopter Hoisting Drilling Rig40 Training Rig

42 Activities44 Offshore Drilling Package45 Jacking and Fixation System for Jack-Up46 Pipe Handling System

52 Mast/Substructure/ Crown Block54 Drawworks56 Hoisting System Components 58 Rotating System Components60 Top Drive System62 Mud Pumps63 5NB2400GZ Quintuplex Pump Set64 3NB1600GZ Light Triplex Pump Set65 Drilling Machine’s Step-type Panning Device66 Drilling Tubular Transporting Device68 lron Roughneck

48 Integrated Shale Gas Exploiting Solution49 Fracturing Pump50 Flexible Water Tank

72 Drilling Motors74 Electric Drive System76 Driller's Cabin

78 Pipes78 Down Hole Tools78 Bits79 Well Head Tools79 MWD/LWD79 Rig Floor Tools79 BOP80 Mud Material80 Engineering80 Fracturing Equipment Engineering

www.hh-gltd.com

01

Group Introduction

www.hh-gltd.com02 03 Group Introduction

HH (Honghua Group) has developed into not only a large-scale equipment manufacturer and drilling service enterprise engaged in the research, design, manufacturing and general assembly of drilling rig, offshore engineering and equipment for oil exploration and development, and also the largest drilling rig export enterprise in China and one of the greatest global manufacturers of land rigs. In March 2008, HH was successfully listed in the Stock Exchange of Hong Kong Limited, and became the first listed drilling rig manufacturer of China. Headquartered in Chengdu City of Sichuan Province, the group has the onshore and offshore equipment manufacturing bases located in Deyang City of Sichuan Province and Qidong City of Jiangsu Province respectively, and the factories, sales and service bases established in several countries and districts globally.

Main Business:Provide the customer with onshore and offshore drilling equipment and matching components of various models.

Provide the customer with complete solutions to onshore and offshore drilling equipment and customized products in accordance with specific demands of the customer.

Provide the customer with trainings on drilling rig operation as well as site installation and maintenance services.

Provide the customer with oilfield equipment, components and consumables.

Subsidiaries

HH offshore Oil & Gas Equipment

Hongteng


HH has established 12 subsidiaries in the USA, Russia, Egypt, the UAE, Kazakhstan, Venezuela and China, i.e. HH America, HH Russia, Egyptian Petroleum HH, HH Golden Coast, HH Kazakhstan, HH Venezuela, Sichuan HH, HH Electric, HH offshore Oil & Gas Equipment, Gansu Hongteng, HH International, HH Oil & Gas Engineering Services, and representative offices in India, Indonesia, Pakistan, Kuwait, Iraq, Poland, Uzbekistan, Azerbaijan, , Brazil and Columbia.

HH America

HH International

HH Russia

Egyptian Petroleum HH

HH Electric

HH Golden Coast


Hong kong

Japan

Vietnam

Bangladesh

Thailand

Indonesia

India

United Arab Emirates

Pakistan

Brazil

Venezuela

Colombia

America

CanadaRussia

Kazakhstan

Uzbekistan

Turkmenistan

Saudi Arabia

Kuwait

Oman

Ukraine

Azerbaijian

Germany

Netherlands

Algeria

Egypt

Nigeria

Serbia

Poland

Turkey

Kenya

Sales Achievements(partial)

Sales Achievements(partial)


ZJ50DBS Skidding RigZJ70DBS Rig in Pakistan ZJ50DBS Arctic Rig in Russia

ZJ50DBS Rig in Thailand ZJ50DBS Rig in Venezuela

ZJ40DT Rig in Kuwait

ZJ40DBST Rig in America ZJ20CZ Truck-mounted Rig in Russia

CNOOC YC13-1 Drilling Package

CACT HZ25-3 Drilling Package

CONOCOPHILLIPS PL19-3 B/C/D/E/F

Drilling Packages (5)

CNOOC NB35-2 Workover Rig

In recent years, HH has sold nearly 100 sets of drilling rigs to all oil fields domestically and internationally. Among them 80% were sold to overseas market.

Depending on the excellent quality, competitive price and satisfying after-service, self-made DBS series electric rig, arctic rig, fast-moving rig, HH was awarded acceptance and appreciation by global clients. HH rigs are widely used in more than twenty countries and regions such as United States, Russia, Middle East, Central Asia and Africa etc, which take up great sales share of global land rig market and promote the upgrading of global land rigs.

Currently, almost 1000 sets of HH drilling rigs are serving around the world.

ZJ50DBS Rig in Daqing Oilfield

Shanghai Shipyard Tiger Drilling Ship Project

Manufacture Capacity

www.hh-gltd.com1 0 11 Group Introduction

With the annual manufacturing capacity of 140 drilling rigs and 500 mud pumps, HH has the world's largest rig assembly and test yard in China, where 24 rigs can be assembled/rigged up simultaneously.

HH possesses a first-class fabrication workshop, machining workshop, assembly workshop, forging workshop and related machining equipment to manufacture mast and substructures, hoisting system parts, rotating system parts, high & low pressure mud system parts and auxiliary system parts for rigs.

HH possesses an electrical equipment subsidiary to manufacture and assemble rig electrical equipment , including: VFD systems, SCR systems, MCC systems , drill motors, well site circuitry and lighting systems, etc.

HH possesses a solids control equipment subsidiary for manufacturing mud tanks, solids control equipment, drill floor tools, mud manifolds and personnel camps, etc.

HH possesses an offshore equipment subsidiary to design, manufacture and supply complete sets of offshore platform and related offshore equipment.

Mud Pump Workshop

Machining Workshop

Machining Equipment


Research CapacityHH is capable of researching and developing various land rigs, rig components, offshore drilling and servicing modules, offshore equipment and is also able to develop products for various operation conditions and territorial environments as per clients' requirements.

HH possesses a 600-staff highly qualified research and development team, which has already acquired several technology patents with Independent intellectual property rights. The team is rich in rig design experience and developed several advanced rig products and parts to meet clients' requirements better.

The team can carry out integrated design of mechanic, electric and hydraulic system to meet the modern rig requirements of precise control and high automation, etc.

HH employs dozens of famous experts and professors on drilling equipment, drilling technology, offshore engineering, welding and hydraulic etc to form an expert committee for decision-making, consultation and technical support.

HH possesses 2D, 3D design software like AutoCAD, Pro/E and SolidWorks etc, and mechanics simulation, finite element analysis software like SACS and Ansysetc, to achieve full 3D design and simulation for new products. And HH built PTC WindChill PDM platform to reduce design cycle of new products and improve design flow control.

1

MN

MX

XYZ

49535.4.500E+08

.800E+08.100E+09

.150E+09.200E+09

.250E+09.300E+09

.212E+10

MAR 12 201411:37:19

NODAL SOLUTION

STEP=1SUB =1TIME=1SEQV (AVG)DMX =.277815SMN =49535.4SMX =.164E+10

Qualification Certification

Quality Assurance


Quality guideline: standard management, advanced technology, excellent quality, satisfying service.

HH has a complete quality control system, and provides high quality products as per related industrial specifications.

Rigs’ quality and operation safety are assured by designing and manufacturing.

HH possesses a highly qualified quality control team, advance QC equipment and special test equipment for rigs.

HSE certification, API certification, integrator authentication for ABB drive system and explosion proof certification for related electrical products, etc.

HH can provide clients with equipment that meet local special specifications, like GOST standard in Russia.


Services and TrainingHH owns a 200-staff professional service team for rig installation, commissioning and solution of problems arising during on-site operation. After-sale service offices have been set up in America, Egypt, U.A.E., Russia and China. HH promises: After receiving the feedback from users, a correct and complete reply will be given within 24 hours. For the problem needs to be solved on site, our technicians will arrive at the site as soon as possible. HH owns a DBS rig training base with a set of simulation operation training platform including advanced DBS training rig and electric control system and hydraulic system, and multimedia audio education lab, multifunction electric classroom, and professional training text books. It has already trained nearly one thousand service staff for clients in Russia, America and Middle East, who are capable of supplying mechanic, electric and drilling engineering services.

www.hh-gltd.com 18 19HH Products

Design and manufacture onshore drilling rigs with 1000m-12000m drilling depth capacity, offshore drilling package with 3000m-12000m drilling depth capacity.Design and manufacture various rig components and parts.Provide customers with drilling tools, drill pipes, wellhead assembly, mud materials, well-control equipment, downhole tools, floor tools and cementing equipment for different operation.Be able to design and produce rigs upon customers' requirements and offer comprehensive solutions for drilling equipment.Provide clients with overall rig operation and maintain training by a special training rig.We set up several service centers all over the world to provide clients with rig services like installation, commissioning and repair, and more centers are under construction.Provide drilling engineering services.

HH Products

2×1,000kW 2×1,340HP3×1,000kW 3×1,340HP3×1,200kW 3×1,610HP4×1,200kW 4×1,610HP5×1,200kW 5×1,610HP5×1,400kW 5×1,880HP

ZJ30DBS

ZJ40DBS

ZJ50DBS

ZJ70DBS

ZJ90DBS

ZJ120DBS

3,000m/9,840ft

4,000m/13,000ft

5,000m/16,400ft

7,000m/23,000ft

9,000m/29,500ft

12,000m/39,400ft

600kW/800HP

1,000kW/1,340HP

1,200kW/1,600HP

2,000kW/2,680HP

3,200kW/4,300HP

4,500kW/6,040HP

170mt/378,000lbs

225mt/500,000lbs

315mt/700,000lbs340mt/750,000lbs

450mt/1,000,000lbs

585mt/1,300,000lbs675mt/1,500,000lbs

900mt/2,000,000lbs

ZJ90DBS Rig ZJ50DBS Rig in Daqing

www.hh-gltd.com 2 0 21HH Products

Equipped with integral driller's cabin with good human-machine interface, main operation can be realized by joystick and touch screen, where driller can monitor all systems’ status.

Perfect rig misoperation protection can ensure the safety of operators and equipment.

Perfect rig information system, including drilling parameters display and record, video monitor system for rig operation, rig interior communication system, and information remote transmission and monitor system as well.

Electric drive system failure diagnosis function and PLC system with redundancy function.

Operation of automatic rig floor tools makes DBS rig reach a new height in automation and intelligentization.

We can also provide our customer a basic platform for automatic and intelligent drilling, which can be integrated with control system for automatic operation and intelligent drilling.

The first HH DBS rig was delivered from the factory in 2002, and now there are about 200 rigs drilling worldwide.

With the feature of fully Digital Controlled AC VF Electric Drive, DBS drilling rig is one of the most competitive products of HH. This kind of rig has the advantages of excellent operation performance and economical operation efficiency, meanwhile, with the higher automation degree, it greatly reduces labor intensity of well-drilling operation.

DBS rig, with the AC motor features of wide speed range and high torque output, is very suitable to drive drawworks, mud pump, rotary table and top drive; and AC motor is more suitable to be used in explosion proof areas.

AC VF control system has the functions of dynamic braking and max torque output at zero speed, making the operation mode of DBS rig totally different from traditional rig. It provides high efficiency operation and higher safety performance at the same time.

AC driving system has higher electric power factor, less requirement for power unit and lower energy consumption.

Simplified mechanical transmission with less components maintenance work.

Equipped with one gear VFD-driven drawworks of smaller size, lighter weight and higher reliability. Auxiliary drive system is optional for auto-bit-feed and emergency operation.

Main Features

Technical Parameters

VFD House

VFD Invertor Unit

AC VFD (DBS) Rig Series

VFD-Driven DrawworksRig Back Site LayoutDrill Floor

VFD-Driven Mud Pump Sets

Model Nom. Depth Drawworks PowerMax. Static Hook

LoadPump Power Power Equipped

2×597kW2×800HP2×746kW

2×1,000HP2×1,193kW2×1,600HP3×1,193kW3×1,600HP3×1,193kW3×1,600HP3×1,641kW3×2,200HP

2×1,000kW 2×1,340HP3×1,000kW 3×1,340HP3×1,200kW 3×1,610HP4×1,200kW 4×1,610HP5×1,200kW 5×1,610HP

ZJ30D

ZJ40D

ZJ50D

ZJ70D

ZJ90D

550kW/750HP

745kW/1,000HP

1,100kW/1,500HP

1,490kW/2,000HP

2,235kW/3,000HP

170mt/378,000lbs

225mt/500,000lbs

315mt/700,000lbs340mt/750,000lbs

450mt/1,000,000lbs

585mt/1,300,000lbs675mt/1,500,000lbs

3,000m/9,840ft

4,000m/13,000ft

5,000m/16,400ft

7,000m/23,000ft

9,000m/29,500ft

www.hh-gltd.com22 23 HH Products



The drawworks, rotary table and mud pump can realize DC speed regulation control independently.

Drawworks is equipped with one or more DC motors, adopting chain drive, 4 forward+ 4 reverse gears, and its brake system adopts hydraulic disc brake & electromagnetic eddy current brake (or Eaton disc brake).

Rotary table is driven independently by DC motor with 2 forward & 2 reverse gears.

Digital control auto-bit-feed system can be selected to equip, driven by AC-VF motor; driller can carry out drilling operation at optimum drilling parameters by touch screen, improving well bore quality, reducing labor intensity of driller, hence enhancing work efficiency.

DC electric drive system adopts digital control system with auto failure monitoring, which is a perfect protection function.

Equipped with perfect driller's cabin with touch screen of parameters display, so driller operation is simple and direct.

Equipped with perfect drilling parameters instrument system, realizing display, store and print of drilling parameters.


ZJ50D Rig ZJ70D Rig

DC (SCR) Rig Series

SCR & MCC System

DC Drive DrawworksDriller's Cabin

Main Features

2×597kW2×800HP2×746kW

2×1,000HP2×1,193kW2×1,600HP3×1,193kW3×1,600HP3×1,193kW3×1,600HP



ZJ70LDB Rig

RT Independently Driven (LDB) Rig Series

Compound Transmission

Driller's Cabin

VFD House Rotary Table and Drive Unit

Main Features

Rotary table independently driven rig is a kind of electromechanical rig with economical efficiency of mechanical rig and some performance of electric rig.

Equipped with rotary table motor, settling the problem that rotary table speed of mechanical rig adopting compound drive and its mud pump stroke cannot be adjusted respectively. RT speed can be adjusted precisely, while functions of torque control and max. torque setting protection etc. can meet the requirements of complex drilling technology.

Drawworks and mud pumps driven by compound chain box. Cardan shaft connection is used between all parts of drive system, making assembly and disassembly easy.

Drawworks is seal type chain drive drawworks with mechanical shift gears of 4 forward and 4 reverse, and its main brake is hydraulic disc brake while auxiliary brake is electromagnetic eddy current brake.

Equipped with auxiliary AC VF (VFD) drive device for auto-bit-feed and emergency operation.

Auto-bit-feed adopts digital control mode, making bit-feed evenly and smoothly with high well bore quality, increasing ROP and avoiding down hole accident more efficiently.

Equipped with perfect driller's cabin with touch screen of parameter display, so driller operation is simple and direct.

Equipped with perfect drilling parameter instrument system, realizing display, store and print of drilling parameters.

Power-saving generator driven by integral chain box can be selected to equip for supplying power to RT and well site, so other generating equipment are unnecessary in normal drilling condition.

2×810kW 2×1,080HP3×810kW

3×1,080HP3×810kW

3×1,080HP4×810kW

4×1,080HP

ZJ30LDB

ZJ40LDB

ZJ50LDB

ZJ70LDB

600kW/800HP

1,000kW/1,340HP

1,000kW/1,600HP

1,490kW/2,000HP

3,000m/9,840ft

4,000m/13,000ft

5,000m/16,400ft

7,000m/23,000ft

170mt/378,000lbs

225mt/500,000lbs

315mt/700,000lbs

450mt/1,000,000lbs

Model Nom. Depth Drawworks Power Max. Static Hook Load

Pump Power Power Equipped

2×597kW2×800HP2×969kW

2×1,300HP2×1,193kW2×1,600HP3×1,193kW3×1,600HP

2×810kW 2×1,080HP3×810kW

3×1,080HP3×810kW

3×1,080HP4×810kW

4×1,080HP

ZJ30L

ZJ40L

ZJ50L

ZJ70L

550kW/750HP

745kW/1,000HP

1,100kW/1,500HP

1,490kW/2,000HP

3,000m/9,840ft

4,000m/13,000ft

5,000m/16,400ft

7,000m/23,000ft

170mt/378,000lbs

225mt/500,000lbs

315mt/700,000lbs

450mt/1,000,000lbs


Mechanical rig is driven by diesel engine; drawworks, rotary table and mud pump are driven by diesel engine through compound unit. Cardan shaft connection is used between all parts of drive system, making disassembly and assembly easy.

Mechanical drive adopts many kinds of combined drive modes such as "diesel engine + hydraulic torque converter (or coupling) + compound box", "diesel engine + V-belt compound device", etc.

Power engine and drive device are installed at low position, and cardan shaft is used for transferring power to drill floor to drive rotary table.

Drawworks is seal type chain drive drawworks with mechanical shift gears of 4 forward and 2 reverse (or 6 forward & 2 reverse), its main brake is hydraulic disc brake or band brake while auxiliary brake is electromagnetic eddy current brake.

Drawworks is equipped with auxiliary AC motor drive device for mast up & down and emergency operation and reserves interface for upgrading to auto-bit-feed system.

Equipped with driller's cabin and drilling instrumentations. The driller can operate some hydraulic and pneumatic tools in the driller's cabin, which improves driller's working environment and reduces his labor intensity.

Mechanical Rig Series

Main Features


Compound Transmission

Drawworks

ZJ70L Rig



2×597kW2×800HP2×969kW

2×1,300HP2×1,193kW2×1,600HP3×1,193kW3×1,600HP

1×403kW 1×540HP1×403kW 1×540HP1×522kW 1×700HP2×403kW 2×540HP2×522kW 2×700HP

ZJ10CZ

ZJ15CZ

ZJ20CZ

ZJ30CZ

ZJ40CZ

260kW/350HP

335kW/450HP

400kW/550HP

550kW/750HP

745kW/1,000HP

90mt/200,000lbs

112mt/248,000lbs

158mt/348,000lbs

180mt/378,000lbs

225mt/500,000lbs

1,000m/3,280ft

1,500m/4,920ft

2,000m/6,560ft

3,000m/9,840ft

4,000m/13,000ft


Power system, transmission system, control system, lifting system, crownblock and mast etc. of the rig are mounted on a special carrier, making installation easy and transportation fast.

Adopting telescoping mast and foldable substructure.

Equipped with one or two power engine sets, which can run separately or parallelly by clutch.

Chain drive is adopted for RT and DW, making maintenance easy.

Equipped with mud pump set driven independently by diesel engine.

AC or DC electric drive trailer (truck-mounted) rig with higher operation performance can be supplied according to clients' requirements.

HH can provide low-temperature type trailer (truck-mounted) rig to meet operation requirements of low-temperature area.

According to features of extreme low temperature environment, material, lube seal, hydraulic & pneumatic control, electric 0 0

drive and control etc. are optimized to meet the operation requirements of ambient temperature within -45 C～40 C.

Low-temperature type trailer (truck-mounted) rig is equipped with winterization system, including wind shelter and heating equipment.

Truck-Mounted Rig Series

Main Features




1×370kW1×500HP1×597kW1×800HP2×370kW2×500HP2×597kW2×800HP2×746kW

2×1,000HP

ZJ20CZ Rig in Russia

ZJ20T Rig in Russia


HH arctic rig is suitable for extreme environment operation in the region of Siberia and near arctic, etc. This kind of rig adopts structure material for arctic environment and complete winterization system.

According to features of extreme low temperature environment, material, lube & seal, hydraulic & pneumatic equipment, electric system etc. are optimized to meet the operation requirements of ambient temperature within -45℃～40℃. Anti-low temperature material is adopted for load components such as mast, substructure, crown block, ladders, handrails and drawworks, etc. Auto temperature control electric heater is used in lube oil tank.

Most HH arctic rigs adopt AC VF drive mode, matching diesel generator for power system. For clients' requirements, matching transforming power module that connects to high-voltage industrial power grid is available.

All components of some arctic rigs are installed on heavy rails pad and designed as skidding rig for cluster well and especially adaptable for wet land near polar region according to clients' requirements.

HH arctic rigs are mainly applicable in Russia, Kazakhstan, Canada and Uzbekistan, etc.

Main Features

Arctic Rig

Mud TankMud PumpDrill Floor

Arctic Rig in Russia


Desert Fast Moving Rig

Main Features

Desert fast moving rig adopts wheel set trailer transportation for all modules, which shortens transporting time of rig between wells and reduce installation work load with very high operational performance and efficiency.

Mast and substructure can be trailed with mast vertical and heavy trailing wheels on substructure have turning function. Mast can be trailed and transported independently without top drive disassembly.

Mast top is designed to be foldable, and can pass overhead high voltage power grid of oil field easily.

Power module, drilling pump set, mud tank and other accessories can be equipped with trailing device for fast moving.

The whole structure layout of drilling rig is suitable for fast moving and installation. The design of rig cable and pipelines can meet the requirements of fast installation and disassembly. Matched movable hydraulic power station is for the hydraulic operation during rig transportation.

Most HH fast moving rigs are driven in AC VF mode.

For Rig design and corollary equipment, we have considered the requirements of desert, high temperature or sandstorm conditions.

Rig Moving

Mud Tank Moving

Mast Moving

Mud Pump Module Moving

Power Module Moving

ZJ70DBST Rig in Kuwait


Coiled Tubing Equipment

Hybrid Coiled Tubing Drilling Rig

LG450/60T Coiled Tubing Operation Machine

HH CTR120/300 hybrid coiled tubing drilling rig has combined the conventional drilling rig with coiled tubing operation unit, i.e. the drilling can be applied by both the coiled tubing and the conventional jointed drill pipe. Maximum hook load of the drilling rig is 135T, injection head is driven by hydraulic power, maximum lifting capacity is 54T, maximum snubbing capacity is 27T, maximum tripping speed of the coiled tubing is 48m/min, drilling depth of 3-1/2" coiled tubing is up to 2,000m. The drilling rig is equipped with power swivel, iron roughneck, hydraulic slip, mechanical handing unit and other automation wellhead machines and tools, with the features of high operating efficiency and low worker's labor intensity. The main equipments are installed on three large trailers with good mobility, better meeting the users’ need for exploration and development of shallow reservoir.

Be able to perform independent operation.

Equipped with portal frame mast, no other crane needed.

Few modules, convenient for transportation.

Small footprint.

Main Features

CTU135/52C Coiled Tubing Unit

Be able to perform independent operation, strong mobility.

The cane equipped on the rig can lift the injection head as well, no other crane needed.

Equipped with two separate inlets for alternative use of mud or air as drilling medium.

Equipped with 8×6tridrive chassis with good maneuvering characteristics;

Equipped with data acquisition system and coiled tubing fatigue analysis software so as to inspect on spot situation and predict service life of the coiled tubing.

Small footprint.

Main Features

Main Features

CTU135/52C Coiled Tubing Unit


Hybrid Coiled Tubing Drilling Rig

Injector capacity of 60,000 pounds, 80,000 pounds, 100,000 pounds, 120,000 pounds or other specifications are available as requested.Various specifications and models of coiled tubing drum are available as requested.


DBS Single Drilling Rig

ZJ40 Rack Drilling Rigand Pinion

Hydraulic Single Drilling Rig

Technical Parameters of Hydraulic Single Drilling Rig

Technical Parameters of ZJ40 and Pinion Drilling Rig

Rack

Main Features

As for operations like coal-bed gas, shale gas, workover operation, inclined well operation, slim-hole operation and surface drilling with large rig, HH especially researched and developed hydraulic single rig, gear and rack rig and DBS single rig for single (joint) operation.

kNlbsmftmft

mmin

N.mft.lbm/s

ft/minmft

N.mft.lb

r/min

900~1,580202,330-355,198

23.376.40~6

0~20

100,00073,8220.732.395

1652.5

35,00025,838

0~150

45°~90°(Every 5° Per Position)

r/min 0~165

4×5

AC/DC/AC

φ88.9~φ270φ3.5~φ10.63

kNIbsm/sft/sN.mft.Ib

mft

2,250505,820

1.063.48

50,00036,911

516.4

kNIbs

mmin

mmin

mftmft

2,250505,820

321.26

24 78.746/4.8

20/15.75

698.5271/2

Technical Parameters of DBS Single Drilling Rig

Description Main Technical Parameters



The rig series have the following features:

Small - Small dimensions and small floor space

Few - Few transport modules; few rig operating expenses and few operators

Fast - Fast installation; fast movement; fast drilling

Wide - Wide scope of application

High - High Tech; high degree of automation

Max. Hook Load

Effective Height of Derrick

Height of Floor

Max. Torque of Iron Roughneck

Max. Lifting Speed

Application Scope of String for Iron Roughneck and Hydraulic Slip

Journey of Lifting System (Top Drive)Max. Torque of Hydraulic Top DriveRotate Speed of Hydraulic Top Drive

Max. Lifting and Pressing Ability

Max. Lifting Speed

Rated Torque of Power Swivel

RPM of Power Swivel

Range of Tilt Angle for The Derrick

Height of Floor

Control MethodElectro-hydraulic

Integration Control

Max. Hook Load

Reeving of Travelling System

Wire Rope Diameter

Driving Mode

Diameter of Rotary Table OpeningForm and Effective Height of DerrickHeight of Substructure and Clear Height of Rotary Beam

Single Series Drilling Rigs

mft

Main Features

Quick and easy Rig-up modules, and the whole rig has no more than 25 modules.Derrick and substructure are jacked up by hydraulic cylinder. Strong mobilityMonkey board pipe racking device and top drive lifting The marching type walking device enables the rig to walk in device equipped on the derrick are for the purpose of quick 8 directions: horizontal, vertical and ±45°, so as to meet the and easy rig-up. high requirements of cluster drilling.Fast moving High Automation For the purpose of fast moving, derrick is transported by Equipped with hydraulic catwalk, drill floor stabilizer tractor-trailer, other parts disassembled in modules are manipulator, pipe racking device, iron roughneck and other carried by self-loading trucks. automatic drilling tools to realize automatic operations like Few transportation modules screwing up and off single stems, laying drill pipes and

casing feed. The derrick, substructure, crown block, travelling block and top drive can be disassembled to only 7 transportation


1500HP Beyond Rig5,00016,400

mft

3,400764,350

kNlbkNlb

1,800404,660

6×7 straight

φ32φ1.26

mmin

1,3801,850

kWHP

kWHPkWHP

φ952.537 ½

mmin

1,193/21,600/2

929.5

mft

10.6×9.1634.8×30

1,100×3+ 3201,475×3+ 429

7.78725.5


Wire Reeving System

Diameter of Drilling Wire

Max. Input Power of Winch

Nom. Depth

Max. Hook Load

Max. Drill String Weight

Open Diameter of Rotary Table

Rated Power / Quantity of Drill Pump

Height of Drill Floor

Drill Floor Area

Total Rig Power

The Clear Height From Rotary Table Beam Underside To The Ground


Helicopter Hoisting Drilling Rig

Main Features

It is applicable to drilling operations in tropical rain forests, swamps, Gobi deserts and other harsh environment. The modular design and helicopter lifting transportation mode can effectively reduce the infrastructure construction costs of drilling contractor and protect the environment. Regular helicopter lifting rig pales before HH helicopter lifting rig whose heaviest module is only 2.7T.

Helicopter Hoisting Drilling Rig

mftmft


Training Rig

The rig can be used not only for full training purpose but also for drilling well.

There is a modernized classroom on the left side of the drill floor, for students to observe and study; and inside there are integrated teacher's chair and student's chair. The entire driller's operation process can be replayed on the big screen in front of the classroom by synchronized closed-circuit projection system, for easy real time explanations.

DW speed and function control adopts “hydraulic disc brake+ dynamic brake + AC VF control”.

Main Features

Offshore Equipment

132kW/180HP

1,000kW/1,340HP

ZJ10DBS

ZJ40DBS

1,000m/3,280ft

4,000m/13,000ft

60mt/133,000lbs

225mt/500,000lbs


Model Nom. Depth Drawworks Power Max. Static Hook Load

Pump Power

1×370kW1×500HP1×746kW

1×1,000HP


Since 2004, HH has been involved in the supply of a great number of offshore drilling equipment for fixed-platform and drillships. Over the years, HH could supply drilling package for all types of platform and vessels including drilling equipment, system integration and project management.

Barge Rig

3000HP Walking Rig on Island

Fixed Platform Rig

Semi-submersible Rig

Jack-UP Rig

Activities

Engineering Project

Management

Comprehensive Solution

Eq

uip

ment

Constru

ctio

n

Installation and CommissioningAfter-sales service

Drilling Ship

Jacking and Fixation System for Jack-Up

Technical Parameters of HHOffshore Jacking System

HJS550

HJS450

HJS350

HJS250

Model

Technical Parameters of HH Offshore Fixation System

HFS4500

HFS6500

HFS8500

HFS10A

HFS12A

Model

HH Offshore Fixation SystemHH Offshore Jacking System

Technical Parameters of Offshore SCR-DC Drilling Module

HZJ40D

HZJ50D

HZJ70D

HZJ90D

225mT/500,000lb

315mT/700,000lb

450mT/1,000,000lb

675mT/1,500,000lb

K type, 42m/140ft

K type, 45m/147ft

Tower, 48.8m/160ft

1,000kW/1,340HP

1,200kW/1,600HP

2,000kW/2,680HP

3,200kW/4,300HP

698.5mm/27.5"

952.5mm/37.5"

952.5mm/37.5"

1,257.3mm/49.5"

HXJ10

HXJ15

HXJ20

HXJ30

HXJ40

90mT/200,000lb

112mT/248,000lb

158mT/350,000lb

180mT/378,000lb

225mT/500,000lb

K type31m/100ft

K type32m/105ft

K type36m/120ft

K type36m/125ft

K type38m/125ft

132kW/180HP

330kW/450HP

400kW/550HP

600kW/750HP

800kW/1,000HP

444.5mm/17.5"

444.5mm/17.5"

520.7mm/20.5"

698.5mm/27.5"

698.5mm27.5"

Technical Parameters of Offshore VFD Drilling Module

HZJ40DBS

HZJ50DBS

HZJ70DBS

HZJ90DBS

HZJ120DBS

225mT/500,000lb

315mT/700,000lb

450mT/1,000,000lb

675mT/1,500,000lb

900mT/2,000,000lb

K type, 42m/140ft

K type, 45m/147ft

Tower, 52m/170ft

Tower, 52m/170ft

1,000kW/1,340HP

1,200kW/1,600HP

2,000kW/2,680HP

3,200kW/4,300HP

4,500kW/6,000HP

698.5mm/27.5"

952.5mm/37.5"

952.5mm/37.5"

1,257.3mm/49.5"

1,536.73mm/60.5"

44 45 www.hh-gltd.com

Max. Holding Load/Side (Half Chord)

Max. Holding Load (Chord)

Nominal Jacking Load/Pinion

Preload Jacking Load/Pinion

Technical Parameters of Offshore Workover Rig Module (Mechanical-driven/DC-driven/AC-driven)

Model Max Hook Load Mast Type

and Effective Height Nominal Power

of DW Power of Mud Pump Opening Diameter

of RT


and Efective Height Nominal Power


of RT


and Effective Height Nominal Power


of RT

Offshore Drilling Package

2×746kW2×1,000HP2×1,193kW2×1,600HP3×1,193kW3×1,600HP3×1,641kW3×2,200HP

1×370kW1×500HP1×597kW1×800HP2×370kW2×500HP2×597kW2×800HP2×746kW

2×1,000HP

2×746kW2×1,000HP2×1,193kW2×1,600HP3×1,193kW3×1,600HP3×1,641kW3×2,200HP3×1,790kW3×2,400HP

K type/tower, 45.7m/150ft

K type/tower, 45.7m/150ft

5,338 kN1,200 kips4,448 kN1,000 kips3,558 kN800 kips2,669 kN600 kips

6,939 kN1,560 kips5,782 kN1,300 kips4,626 kN1,040 kips3,469 kN780 kips

20,016 kN4,500 kips30,024 kN6,750 kips37,808 kN8,500 kips46,704 kN10,500 kips55,600 kN12,500 kips

40,032 kN9,000 kips60,048 kN13,500 kips75,616 kN17,000 kips93,408 kN21,000 kips111,200 kN25,000 kips

HH Products

Integrated Shale Gas Exploiting Solution

Pipe Racking MachineHorizontal to Vertical Arm(HTV)

Aerial Work Basket

Tubular Feeding Machine/Catwalk

Mud Bucket Adjustable Mousehole

Pipe Deck Crane

www.hh-gltd.com 46 47

Pipe Handling System

HH Products

Integrated Shale Gas Exploiting Solution

HH brought up an integrated shale gas exploitation concept, that is, ‘network going first, generating gas with gas, gas-electric combination, assembly-line alike operations and production industrialization’. It is the key to achieve low cost and high efficiency.

The all-electric shale gas operations equipment developed by HH, such as 6,000 horsepower variable frequency drive fracturing pump, Flex Tank, DBS cluster well drilling rigs, super-single hydraulic rigs, variable frequency electric drive sand blenders, and the supporting medium voltage variable frequency drive systems and gas generators, effectively solved issues of operating costs, land use, water recycling, environmental protection and others.

HH proposes the concept of building transformer substation and local power grid in shale gas developing block, generated by fuel gas. This concept is expected not only to solve the problems concerning cost-efficiency of energy supply on its own and stability in shale gas developing process, but also a new exit for distributional energy construction.


Max. Input power

Max. Pump Speed

Stroke Length

Gear Ratio

Max. Rod Load Capacity

Max. pressure (4in plunger)

Electrical Voltage

Dimension

Approx. Weight

Dimension With Skid

Approx. Weight With Skid

Max. Pump Flow Rate (5in plunger)Flow Rate at 70MPa (5” plunger）Flow Rate at 105MPa (4” plunger）

4,5006,000

25410

211,310940

3.472162.32225

kWHP

mmin

lb kN

3m /minSPM3m /min

SPM

SPM 275

MPapsi

L/minGPM

3,300

28,00061,729

37,00081,570

V

mmin

mmin

kglb

kglb

3,200×2,500×2,800126×98×110

6,335×3,000×3,010249×118×118.5

10515,0004,3761,167

4.5161 : 1

The most powerful Fracturing pump on the market.

Design to handle harsh conditions for shale gas fracturing.

PLC controlled overpressure protection.

Achieves high efficiency, flow rate and pressure can be adjusted stepless by VFD .

With the wide constant pressure range and overload capability ,more suit for shale gas fracturing.

Fracturing Pump


Electric Fracturing Blender Truck

5NB2400GZ Quintuplex Pump


ZJ40 and Pinion Drilling RigRack

Key Components

Larger capacity, several times larger than ordinary water tank.Small occupation area.Foldable during transportation and hold down freight.High Reliability with less pipeline connections.High efficiency with the fluid level under remote and centralizedmonitoring.Heating system and circulation system are optional.

Technical Parameters of Flexible Water Tank

SHG180A(Crane Hoisting)

SHG180B(Hydraulic Hoisting)

SHG320A(Crane Hoisting)

SHG320B(Hydraulic Hoisting)

1806,357180

6,357320

11,301320

11,301

3m3ft

1756,180175

6,180300

10,594300

10,594

3m3ft

28301283014548445484

2m2ft

10×2.8×332.8×9.2×9.810×2.8×2.9

32.8×9.2×9.514×3.2×3.3

45.9×10.5×10.814×3.2×3.3

45.9×10.5×10.8

mft

mft

10×2.8×10.332.8×9.2×33.810×2.8×11.5

32.8×9.2×37.714×3.2×11.3

45.9×10.5t×3714×2.8×11.345.9×10.5×37

25.556,21825.5

56,21832

70,54832

70,548

tIb

8"

8"

8"

8"

0.222.20.131.30.33

0.33

MPabar

Nominal Capacity

Effective Capacity

Occupation Area

Overall Dimensions

While Transportation

(L×W×H)

Overall Dimensions

While Operating(L×W×H)

Weight Outlet Diameter

Specific Pressure

(Holding Water)

Flexible Water Tank


Main Features

Mast/Substructure/Crown Block

Various types of masts, substructures and Crown Blocks designed, manufactured by HH, with load capacity 60 to 900 metric tons.

Mast types include cantilever-type K-mast, telescopic type K-mast, A-type mast, mast for offshore platform, tower type derrick, as well as the guyline-type mast for truck-mounted rig.

Substructure types include slingshot type, swing-up type, box-on-box type, block type, offshore platform substructures and skidding mechanism.

HH can design and manufacture special masts and substructures for desert fast-moving rig, arctic rig, and cluster well skidding rig, etc. All the customized products are based on customer requirements and also meet API stardards.


JC20 JC20DB JC30DBZ JC30 JC30 JC30DB JC40 JC40D

JC40DB JC50 JC50D JC70 JC70DJC50DB JC70DB JC90DB

JC50DB

1

JC70DB

1

JC90DB

1

JC120DB

1

Main Features

HH can provide a full series of 350HP-4000HP drawworks to meet the requirements of different rigs, with load capacity from 90 to 900 metric tons.

Drawworks drive mode includes AC VF drive, DC SCR drive and mechanical drive respectively.

One step parallel gear (or planetary gear) single shaft driven-AC VFD drawworks is reliable at work with small size, light weight and less maintenance work.

Some drawworks also adopts AC motor to drive directly.

The main brake is band brake or hydraulic disc brake. Auxiliary brake has been equipped with eddy current brake.

The drawworks is also equipped with separate AC VF drive device and computer auto control system, as well as the auto bit feeding function, and the functions of real time control, monitoring and analysis of tripping in condition and drilling condition, to realize optimizing drilling operation.


Technical Parameters for Planetary Transmission Drawworks

Drawworks

Model

Nominal Drilling Depth(5"DP)

Rated Input Power

Drum Size (D×W)

Shift Gears

Weight

Overall Dimension(L×W×H)

Model


Rated InputPower

Drum Size (D×W)

Shift Gears

Weight

Model


Rated Input Power

Drum Size (D×W)

Shift Gears

Weight

2,0006,562522700

450×88918×35

3,179×1,530×1,575125×60×625,40911,925

5+1R

2,0006,562 400536

457×1,00018×39

3,134×2,477×1,575123×98×629,46520,867

2,0006,562450604

508×82820×33

3,000×2,700×2,100118×

106×839,65021,274

3,0009,843560751

508×1,18520×47

6,070×2,820×2,620239×

111×10327,10059,745

3,0009,843560751

580×88923×35

3,446×3,315×1,835136×

131×7211,43125,201

3,0009,843600805

580×1,18223×47

5,030×2,919×2,731198×

115×10817,93339,535

4,00013,123

735986

640×1,13925×45

6,602×3,287×2,800260×

129×11032,00070,547

4,00013,123

8001,073

640×1,14225×45

6,400×3,472×3,145252×

137×12435,80078,925

1 1 4+2R 5+1R 1 4+2R 4+4R

mft

kWHPmmin

kglb

mm

in

1 14+2R 1 4+2R4+4R 4+4R 2

4,00013,123

9001,207

640×1,13925×45

5,250×2,800×2,128

207×110×84

20,71045,657

5,00016,4041,1001,475

685×1,20927×48

6,398×3,200×3,043

252×126×120

37,00081,570

5,00016,4041,6002,146

685×1,24527×49

6,900×3,285×2,986

272×129×118

35,50078,263

7,00022,9661,4701,971

770×1,43930×57

7,705×3,154×3,039

303×124×120

46,500102,510

7,00022,9661,6002,146

770×1,43930×57

8,115×3,616×3,147

320×142×124

56,620124,820

5,00016,4041,2001,609

685×1,24527×49

6,016×3,000×2,676

237×118×105

28,10161,951

7,00022,9662,0002,682

770×1,43930×57

6,540×3,200×2,627

258×126×103

41,72891,994

9,00029,5283,2004,291

980×1,84039×72

12,100×3,200×3,890

476×126×153

70,486155,390

mft

kWHPmmin

kglb

mm

in

5,00016,4041,4001,877

φ1,343×856φ53×34

4,605×2,495×2,740181×98×108

27,50060,627

mft

kWHP

mmin

mminkglb

7,00022,9661,4001,877

φ1,368×1,165φ54×46

4,915×2,495×2,740194×98×108

30,20066,579

9,00029,5282,8003,755

φ1,496×1,196φ59×47

8,240×2,495×2,830324×98×114

51,000112,430

12,00039,3702,8003,755

φ1,396×1,616φ55×64

8,660×2,320×2,830341×91×111

55,000121,250




Hoisting System Components

Main Features

HH has first-class forging workshop and relevant processing equipment, capable of producing 135 to 900 metric tons lifting system components of full series of traveling blocks, hooks, elevator links, etc.

The traveling system components are made of heat-treated high-strength alloy steel, and passed through rigorous inspection and test.

Full series of integrated traveling blocks and hooks are available.

YC170 YC225 YC315 YC450 YC675 YC900

5 6 6 7 75

Technical Parameters for Traveling Blocks

Max. Static Load

Sheave Qty

Sheave OD

Wire Line Diameter

Overall Dimension

Weight

L

W

H

mTlb

mmin

mmin

mmin

mmin

mminkglb

170375,000

9153629

1 1/82,000

791,004

4063025

2,7906,151

225500,000

1,1204432

1 1/42,294

901,190

4763025

3,8058,389

315700,000

1,27050

32.351 1/4,1 3/8

2,580102

1,3505380032

5,64812,452

4501,000,000

1,52460

35.381 3/8,1 1/2

3,075121

1,60063

80032

8,13517,934

6751,500,000

1,5246045

1 3/43,010119

1,6056398039

9,73821,468

9002,000,000

1,83072522

3,740147

1,92076

1,28050

18,22540,179

DG225 DG315 DG450 DG675 DG900

Technical Parameters for Hooks

mT lb

mmin

mmin

mmin

mmin

mminkglb

Max. Hook Load

Opening Size of Main Hook

Spring Working Stroke

Overall Dimension

Weight

L

W

H

225500,000

1907

1807

2,54510078031

75030

2,1904,828

315700,000

2209

2008

2,9531168903583033

3,4207,540

4501,000,000

2209

2008

2,9531168903588035

3,4967,707

6751,500,000

2409

2008

3,541139

1,07542

1,11044

5,34111,775

9002,000,000

38515

2008

4,710185

1,30051

1,33052

12,10026,676

DH250 DH350 DH500DH150 DH750

Technical Parameters for Elevator Links

Rated Load of a Pair Link

Length

Weight Per Pair

mTlb

mminkglb

135300,0001,800

71118257

225500,000

2,700106300655

315700,0003,300130462

1,006

4501,000,000

3,660144690

1,503

6751,500,000

4,572180

1,2702,800


Rotating System Components

Rotary tables with 17 1/2" to 49 1/2" inch opening size are available.Swivels with load capacity 135 to 675 metric tons are available.

Main Features

300

3.58

300

3.22

300

3.67

300

3.56

300

9.85

ZP205 ZP275 ZP375 ZP495

Technical Parameters for Rotary Tables

ZP175

1,257.349-1/2

7251,600,000

37,00026,762

3,693145

2,3149185734

16,69036,795

mmin

mTlb

N.mft.lbs

mmin

mmin

mminkglb

Opening Diameter

Max. Static Load

Max. Working Torque

Max. Speed

Gear Ratio

Overall Dimension

Weight

L

W

H

952.537-1/2

5851,300,000

33,00023,869

2,45797

1,8107171829

7,99017,615

444.517-1/2

135300,00014,00010,126

1,93576

1,28050

58523

3,8888,572

52020-1/2

315700,00023,00016,636

2,29290

1,4755866826

5,53012,191

698.527-1/2

4501,000,000

28,00020,252

2,39294

1,6706668527

6,16313,587

r/min

SL135 SL225 SL450 SL675

Technical Parameters for Swivels

Max. Static Load

Max. Speed

Max. Working Pressure

Bore Diameter of Stem

Connection

Weight

To Stem

To Kelly

To Rotary Hose

4 1/2REG LH

6 5/8REG LH

4"-8Teeth/inch

6 5/8REG LH

6 5/8REG LH

4"-8Teeth/inch

7 5/8REG LH

6 5/8REG LH

4"-8Teeth/inch

8 5/8REG LH

6 5/8REG LH

4"-8Teeth/inch

r/min 300

135300,000

355,000

642 1/2

2,505×758×84099×30

×331,3412,956

225500,000

355,000

753

2,880×1,046×1,065113×41

×422,5705,666

4501,000,000

355,000

753

3,015×1,096×1,065119×43

×423,0606,746

300 300 300

6751,500,000

527,5001024

3,649×1,450×1,162138×57

×466,30013,889

mT lb

MPapsi

kgIb

mm

inOverall Dimension(L×W×H)

mmin


www.hh-gltd.com 60 61 HH Products

Top Drive System

The top drive adopts a structure of mechanical-electrical integration, the motor drives the main shaft directly. Gearless design makes the system a simple structure, low-failure-rate and convenient maintenance.

Bearings of its power system adopt grease lubrication which reduces sealing mechanisms and is convenient for maintenance, as there is no oil lubrication or related oil cooling, filtrating system.

The main motor can work overtorque in a short-time period, and its performance will never be limited by a mechanical reducer. Direct driving also cuts the energy loss during transmissions.

The cooling system has a higher efficiency.

Integrated HPU system, junction box and blower are all installed exterior to the shell of the Top Drive, which are convenient for operation and maintenance.

Main Features


Model

Rated Load

Speed

Brake Torque

Motor Power

Central Pipe W.P.

TDS Weight

Max.Continuous Drill TorqueMake-up &

breakout TorqueMax.Transient

Torque

Clamp Range (O.D.)

Hydraulic System W.P.

DQ225DBZ(250t) DQ450DBZ(500t) DQ675DBZ(750t) DQ900DBZ(1000t)DQ315DBZ(350t)

2,250250

30,000-35,00022,127-25,800

45,00033,22060,00044,25035,00025,800

335450

86-2163 1/2"-8 1/2"

162,28535/525,00012.3

27,120

0-180 0-220 0-200 0-200 0-160RPM

AC Motor Direct DriveDrive Mode

kNst

N.mft.IbN.mft.IbN.mft.IbN.mft.IbkWHPmmin

MPapsi

MPapsimTIb

3,150350

40,00029,58060,00044,25570,00051,67545,00033,220

445600

86-2163 1/2"-8 1/2"

162,28535/525,00013.5

29,760

4,500500

50,00036,90075,00055,35085,00063,00050,00036,900

640860

86-2163 1/2"-8 1/2"

162,28535/525,00015.8534,950

6,750750

70,00051,675125,00092,300140,000103,20070,00051,675

9001,200

86-2503 1/2"-10"

162,285

527,50018.5

40,785

9,0001,000

90,00066,440135,00099,650157,500116,20090,00066,4401,1301,520

86-2503 1/2"-10"

162,285

527,50020.1

44,300

Main Features

5NB2400GZ

kWHP

MPapsi

mmin

mmin

mmin

mminkglb

SPM

1,8002,400

527,500

180×304.87×12

6,150×3,280×2,920242×129×115

29,90065,918

150

Herringbone

4.87:1

Forced Lubrication

API 6#

Rated Power

Rated Pressure

Rated Stroke

Max. Liner Diameter×Stroke

Gear Type

Gear Ratio

Lubrication

Dia. of Suction Pipe

Dia. of Discharge Pipe

Pump Valve

Overall Dimension

Weight

Model


305 Flange12 Flange 130Flange

5 1/16 Flange

Mud Pumps


Main Features

HH manufactures F series 500~2200HP triplex single action fluid test, the certificates of which, together with that of mud pump. related dampener subassembly can be provide by HH.HH F series mud pumps are sound in structure, compact in Mud pump performance meets the technical requirements size and easy to maintenance. of high pump pressure and displacement.With a high-strength frame and crank shaft, hardened Shear pin safety valve or spring safety valve is optional.herringbone gear, HH pumps have a prolonged service life. Built-in lube oil pump and external electric lube oil pump are The design of its hydraulic/fluid end keeps it simple for liner optional.and valve replacements, and the interchangeability of the 1600HP-HL and 2200HP high pressure mud pump 7500psi consumable parts with F series mud pumps from other adopts the L shaped fluid end.manufacturers makes then always available. The Pumps can be set up for direct drive.hydraulic/fluid end pressure components are qualified/designed for both non-destructive and hydraulic

mm

in

kWHP

MPapsi

mmin

mmin

mmin

kglb

SPM

Model

Rated Power

Rated Pressure

Rated Stroke

Gear Type

Gear Ratio

Lubrication



Pump Valve

Weight


Overall Dimension

254 Flange10 Flange130 Flange

5 1/16 Flange

API6# API8#

3NB-500F

165

203.2 Flange8 Flange

103.2 Flange4 1/16 Flange

API5#

Herringbone

4.286:1

3NB-800F

150

Herringbone

4.185:1

3NB-1000F

140


5 1/16 Flange

API6#

Herringbone

4.207:1

3NB-1300F

120

API7#

Herringbone

4.206:1

3NB-1600F

120

API7#

Herringbone

4.206:1

3NB-2200F

105

Herringbone

3.906:1

37350027

3,916

170×1917×8

Forced Splash Lubrication

3,658×2,710×1,573

144×107×62

9,77021,539

59780035

5,000

170×2297×9


3,963×3,024×1,695

145×119×67

14,50031,967

7461,000

355,000

170×2547×10


4,063×3,167×1,822

160×125×72

18,34540,443

9691,300

355,000

180×3057×12


4,615×3,262×2,008

182×143×79

25,82056,923

1,1931,600

355,000

180×3057×12


4,615×3,262×2,008

182×143×79

26,10057,540

1,6402,200

527,500

230×3569×14


5,740×3,020×2,404

226×119×95

42,55093,806

305 Flange12 Flange

130 Flange5 1/16 Flange


5 1/16 Flange


5 1/16 Flange


5NB2400GZ Quintuplex Pump Set

The max displacement of the quintuplex pump is 94.6L/S, longer and due to lower bearing load, bearing can be used 33% higher than that of the traditional triplex pump of the longer too.same power. The maximum operating pressure of the Compared with traditional triplex pumps’ weight, the weight quintuplex pump is 51.7MPa. Two pumps need not to be of moving parts decrease 73% with small inertia force and operated at the same time during each stage of well drilling. smooth operation.Compared with traditional triplex pumps, with the same- Quintuplex pump's output is smooth and pulsation material cylinder liner and piston, the lifespan of cylinder liner dampener is eliminated in the operation.expands 5times and the lifespan of piston increases 10 The crank shaft is driven on both sides synchronously; the times. life-span of the motor bearing is 3.8 times longer.The structure of the whole pump set is more compact. In An intelligent electronic safety valve is added rather than a contrast to the traditional drilling pump set, the weight is traditional mechanical safety valve in order to achieve decreased by 50%. double assurance.Adopting multi-pillar structure of forged crankshaft with Power end maintenance procedure is simplified due to the crankshaft quenching and grinding, crankshaft’s lifespan is new type power end structure design.

kWHP

MPapsi

mmin

mmin

mmin

mminkglb

SPM

3NB1600GZ

1,1931,600

527,500

180×304.87×12

5,828×2,324×2,593229×91×102

24,50054,013

160

Herringbone

5.75:1

Forced Lubrication

API 7#

Rated Power

Rated Pressure

Rated Stroke


Gear Type

Gear Ratio

Lubrication



Pump Valve

Overall Dimension

Weight

Model


305 Flange12 Flange 130Flange

5 1/16 Flange

The Triplex pump set adopts electromechanical design, AC motors directly drive drilling pump instead of traditional transmission gearbox, considerably improving the driving efficiency and reliability. Large displacement up to 56.76L/s, high discharge pressure up to 51.7MPa.Adopts four pillar crankshaft supporting structure and sliding bearing structure at two ends of connecting rod, which contribute a lot to lighter total weight and smaller overall dimension. The whole pump set(includes perfusion system) weights 24.5t and is possible for transportation in one container. The service life of cylinder liner and piston is much longer compared with traditional triplex pumps, greatly lowering frequency of maintenance. Add electric safety valve and a series of smart control system to guarantee accurate control, convenient operation and safety. New type hermetically sealed structure improves power end reliability and lifespan of drilling pump. Power end maintenance procedure is simplified due to the new type power end structure design.

3NB1600GZ Light Triplex Pump Set

Main Features


The complete set is composed of translation block, support, baseplate and hydraulic pressure system and its components, which can realize horizontal, vertical, 45° diagonal moving in cluster well drilling.

This device of simple structure and easy operation characteristics, when matched with specific base, can move and carry drill tools. In transportation, it can be assembled or disassembled together with the base, and easily get through Christmas tree in oilfield.

Max. lifting weight ranges from 200t to 1000t as per rig type.

In the improved design, the walking device is laid inside and on the bottom of the base thus the whole structure becomes compacter and easier for disassembling.

Main Features

Drilling Machine’s Step-type Panning Device


Max. Lifting Height

Distance per Step

Direction

Jacking Hydraulic Cylinder

Translation Oil Cylinder

Hydraulic System Pressure

Basic Bearing Strength

Max. Lifting weight 6001,322,800

1405.51300

11.81horizontal, vertical,

±45°diagonalPushing Force

Pushing Force

Travel Distance

Pulling ForceTravel Distance

2,000449,620

15033,721

1505.91

9521,357

30011.8124240≥1≥10

tlb

mmin

mmin

kNlb

mmin

mmin

kNlbkNlb

MPabar

MPabar


Monkey Board Pipe Racking Device

Pipe racking device installed on monkey board can perform full automatically grabbing and placing of drill pipe and collar in both manual and automatic control mode, so as to realize unattended operation of the monkey board and reduce labor intensity in drilling.

Main Features


Drill Pipe Diameter

Max. Drilling Tool Weight

Max. Drill Collar Diameter

Slewing Angle

Up and Down Travelling Distance

Horizontal Moving Distance

Vertical Moving Distance

Average Time for Each Operation

Control Mode：

φ89~127φ3.5~5

10"

±90º

≤65

Manual+Automatic

mm

s

kglb

8,40018,519

mmin

mmin

mmin

1,50059.052,05080.712,10082.68

Drilling Tubular Transporting Device

Hydraulic Catwalk

Main Features

Compact structure, possible for transportation without disassembling. Drilling tools are lifted evenly, no obstacles in the whole process.One-button operation. Mechanical, electric and hydraulic integrated design to solve vibration problem.When hydraulic system is off, it also can work as a normal catwalk.


Rated Flow

Rated Pressure

Motor Power

Total Power

Max. effective remote control radius

Max. lifting weight

Max. lifting length

Max. lifting diameter

Overall transportation size(L*W*H)

Power Source

Cooling

Control Mode

Gross Weight

Air Cooling

27 (Including Hydraulic Oil)

160

200

150

>100

4,500

13.2

15,000×2,850×2,500

V/Hz

MPapsi

kWft·lbs/s

L/min3ft /min

kWft·lbs/s

mftkgIbmft

mmin

mmfttlb

380/50

334,785

φ500φ16

Main Pump Parameters

Local+Remote Control

118,009

7.06

110,634

>328

11,023

43.3

49.2×9.35×8.2

59,524


Small overall dimension and compact structure.

Light weight, less than 1/2 of ordinary iron roughneck.

Good portability, free from removal during rig movement.

Rail guided, with the tong head automatically aligned to the center of well center.

Easy operation, convenient for remote and local control.

Main Features Technical Parameters

Max. Break-out Torque

Max. Make-up Torque

Max. Spinner Torque

Applicable Pipe Diameter

Lifting Stroke

Horizontal Travel


Hydraulic System How Rate

Control Mode

Max. Spinner Speed

Torque Wrech Rotation Angle

Remote Control + Manual Operation

kN.m

kN.m

kN.m

mm

mm

MPa

L/min

100

80

2.2

300

600

16

160

ft·lbs

ft·lbs

ft·lbs

in

in

psi

GPM

r/min 90

30°

3 1/2"～9 5/8"

73,756

59,005

1,623

0.99

1.98

2,321

43

Rail Type Iron Roughneck

Rail Type Iron Roughneck

Main Features

HH-120 Iron Roughneck, with higher automation and stability, can realize highly effective operation by providing higher torque of make-up and break-out , and rotating speed.

With two working modes of manual and remote control, the Iron Roughneck is operated for make-up and break-out of drilling tools (such as drill pipe, drill collars, casing and all kinds of subs) with pipe diameter from 3-1/2 to 8-1/2 inches.

Portable design and occupies a smaller drill floor space.

HH’s Iron Roughneck can be used for the operation of both land and offshore drilling rigs.

lron Roughneck

3-1/2"～9-5/8"

70

73729

±45°

0~10°

27°

120,000170

102,691140

3,8005,152

2,51599

2,54017.5

AC220V10A 50/60Hz

2,235×1,346×2,92188×53×115

6617.6


Pipe Range


Max. Make-up Torque

Max. Spinner Torque

Max. Spinner Speed

Vertical Tranel

Tong Head Sweeping Range

Tong Head Deflecting Angle

Max. Extension Dimension


Hydraulic System Flow Rate

Power Supply


rpm

kN.mft.lbskN.mft.lbsN.mft.lbs

mmin

MPapsi

Overall Dimension After Retraction

mmin

L /minGPM

mmin

Iron Roughneck HH120

Iron Roughneck HH-100

Wild range of pipe diameters, large make-up, break-out and spinning torque, big wrenching angle(up to 60°) to guarantee reliability and efficiency of make-up and break-out(each complete operation cycle is about 30 seconds), easy to learn and to operate. Remote and local control system are both available.

Main Features


Pipe Range

Max. Make-up Torque



Max. Spinner Torque

Max. Spinner Speed

Connection Height

Horizontal Travel

Vertical Travel


Hydraulic System Plow Rate

Weight

kN.mft.lbs

N.mft.lbs

rpm

mmin

tlb

3 1/2”-10”

10880,000

135100,000

±30°(overall 60°)

4,0673,000(5”DP)

80(5”DP)

835~1,83533~722,252

88 1,000

3921

3,000150405

1,1023

mmin

MPapsi

L /minGPM

mmin

kN.mft.lbs

Electrical Control System


Sticking to the design concept of developing AC traction motor, HH is engaged in research and development of drilling motor with a large extent of constant power to improve the drilling efficiency and decrease the drilling cost. The stator adopts preformed winding and forms a solid complexity after being varnished under VPI vacuum pressure. The rotor is of a squirrel type structure with high strength, which enables the drilling rig operate reliably in severe environment. Besides, the rotor is of small rotational inertia, improving the acceleration and deceleration performance of drawworks and reducing the energy consumption during acceleration and deceleration.

Providing high efficient and energy-saving motor with the power ranges from 30 KW to 4500 KW.

Providing drive motor of all series with drawworks, drilling pump, rotary table, top drive device of ZJ10DBS~ZJ120DBS drilling rig, and interchangeable (installation dimensions) with similar products at home and abroad.

Providing direct-driving top drive motor, direct-driving drawworks motor and direct-driving mud pump motor for various direct-driving devices, featured with large torque, low rotating speed, low noise and high efficiency.

Providing HTZ series DC drilling motor for ZJ40D~ZJ70D drilling rig, and interchangeable (installation dimensions) with similar products at home and abroad.

Product List

NO. Models Torque Freq. Power Factor

EfficiencyConstant Torque Speed

Constant Power Speed

Max. Speed Weight

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

HTB01

HTBO2

HTB03

HTB04

HTB05

HTB06

HTB07

HTB09

HTB12

HTB13

HTB15

HTB17

HTB18

HTB19

HTB21

HTB22

HTB23

HTB26

HTB27

HTB30

HTB31

HTB34

HTB35

HTB36

HTB39

HTB41

1 HTZ01

No. Model Nominal Power

Nominal Voltage

Nominal Current Nominal Efficiency Max

Current Max RPM ExcitingMode

Weight Application Structure

Nominal Power

Nominal Voltage

Nominal Current

SeriesExcitation

RT, DW and Mud Pump

Traditional Oilfield Motor

Drilling Motors

8001,073

750 1,150 970 92.7% 2,518 2,600 3,2007,056

700

600

800

900

1,200

1,000

450

370

1,200

580

880

1,200

250

288

750

500

640

1,130

4,500

900

30

1,800

700

1,600

132

45

575/600

575/600

575/600

575/600

575/600

575/600

575/600

575/600

575/600

575/600

575/600

575/600

575/600

575/600

575/600

575/600

480

575/600

2200

575/600

380

575/600

660

575/600

575/600

575/600

813

745

983

1,095

1,449

1,215

564

491

1,531

774

1,159

1,504

293

399

970

656

944

1,496

1,404

1,196

102

2,180

784

1,970

163

18.3

4,606

8,686

10,310

13,023

11,459

11,937

5,791

23,555

22,918

44,039

70,033

25,529

1,611

25,945

12,160

33,620

8,706

89,929

45,816

71,625

477

29,435

9,482

20,026

1,149

2, 028

49.2

33.5

37.5

33.5

50.5

40.6

37.5

20.4

68

19.6

20.5

30.5

50

11

59.5

19.2

35.5

20.5

63

20.5

51

39.5

35.5

52

37

14

0.91

0.86

0.86

0.87

0.88

0.87

0.85

0.81

0.82

0.82

0.82

0.85

0.91

0.79

0.82

0.84

0.85

0.82

0.86

0.83

0.53

0.83

0.81

0.85

0.86

0.79

95%

94%

95%

95%

95%

95%

94%

93%

96%

93%

93%

95%

96%

91%

95%

92%

95%

93%

97%

92%

88%

96%

96%

96%

95%

53%

1,452-2,518

660-1,060

741-1,253

660-1,090

1,000-1,500

800-1,200

741-1,283

150-250

500-700

125-220

120-167

449-623

1,482-2,200

106-181

589-786

142-252

700-1,292

120-200

940-1,207

120-200

600-750

584-766

705-1,606

763-1,500

1,097-2,459

212-504

2,600

2,200

2,200

2,200

2,200

2,200

2,200

250

700

220

167

808

2,200

300

800

252

2,200

200

1,268

200

881

2,600

2,200

2,600

504

1,935

2,930

3,300

3,600

3,370

3,380

2,360

5,130

3,186

6,328

7,000

6,000

1,200

5,030

2,627

4,025

2,450

11,294

8,530

9,396

410

6,000

3,500

4,630

980

1,500

0-1,452

0-660

0-741

0-660

0-1,000

0-800

0-742

0-150

0-500

0-125

0-120

0-449

0-1,482

0-106

0-589

0-142

0-702

0-120

0-940

0-120

0-600

0-584

0-705

0-763

0-1,097

0-212

%kWHP

N·mft.lbs

kglbs

939

805

1,073

1,207

1,609

1,341

603

496

1,609

778

1,180

1,609

335

386

1,006

671

858

1,515

6,035

1,207

40

2,414

939

2,146

177

60

3,397

6,406

7,603

9,604

8,451

8,803

4,271

17,371

16,901

32,477

51,647

18,827

1,188

19,133

8,968

24,794

6,420

66,319

33,788

52,821

352

21,707

6,993

14,768

847

1,496

4,267

6,461

7,277

7,938

7,431

7,453

5,204

11,312

7,025

13,953

15,435

13,230

2,646

11,091

5,793

8,875

5,402

24,903

18,809

20,718

904

13,230

7,718

10,209

2,161

3,308

kWHP V A RPM % RPM RPM kg

lbs

r/minr/minr/mincosφHzAV



Main Features

Electric Drive System

The electric drive systems include: AC drive (VFD) s, DC drive (SCR drive), MCC (motor control center), well site circuitry, and lighting systems, etc.

VFD (variable frequency drive) is the key to the AC rig. The system consist of the modules such as generator control, rectifier and inverter, dynamic brake, PLC control system, MCC system, transformers, air-conditioning, etc.

The VFD system uses ABB or SIEMENS direct torque converter, with a commonly shared DC bus, it can precisely control the drawworks, mud pumps, and rotary table. Drawworks VFD speed regulation system uses closed-loop control for ensuring high starting torque of the system and improves torque dynamic response at the starting time and low-speed to realize max output torque (suspending function) of zero speed. The inverter adopts a modular structure and is interchangeable, the ability to be removed and installed quickly to save maintenance and system downtime .

The entire system uses bus communication, with several advanced functions such as data display and recording, and remote transmission, etc.

DC Drive (SCR) system consists of generator controls, SCR control cabinet, PLC control system, MCC system, transformers, air-conditioner, etc. The DC Drive (SCR) system uses AC-SCR-DC transmission , digital speed control , making one SCR cabinet control different functions.


Different types of rigs can be equipped with HH’s driller's cabin, including AC rig, DC rigs and mechanical drilling rigs, etc.

The Driller's cabin is the control center of the rig. It provides integrated rig operation and information processing functions, providing a comfortable and safe operating environment for the driller.

Integrated drilling parameters instrumentation systems, combined analog instrumentation and digital instrumentation, the Driller's Cabin can display and monitor the operating conditions of the rigs electrical components.

IPC records drilling parameters can generate and print reports, parameter curves, and store drilling data for up to three months.

The cabin is equipped with rig video surveillance systems and intercom systems, as well as a gas detection and alarm system.

The design of the driller's cabin meets ergonomic requirements; electrical design and installation. It is in compliance with the relevant electrical codes, specifications and explosion-proof standards.

Driller's Cabin

Main Features

Oil Equipments

HH Products

Drill pipe and tool: drill pipe, Kelly, heavy weight drill pipe, drill collar, drill, inner blowout preventer, plug valve, etc. Petroleum tubular goods: casing, cementing hose (high-pressure cementing hose and bended pipe), tubing, pipeline, etc. Wellhead device: casing head, tubing head, Christmas tree, sucker rod, short rod, sucker rod coupling, etc. Mud material and mud works Well-control equipment: blowout preventer, manifold, control device, test device, etc. Down-hole tool: down-hole motor, jar, stabilizer, overshot, spear, etc. Floor tool: elevator, slip, power tongs, spider, iron roughneck, etc. Diesel engine, motor, power generator, compressor, etc.Well measuring and logging Fracturing and cementing equipmentGeophysical prospecting, labor contract, oil and gas engineering, etc.


Pipes

Bits

Drill Pipe

Drill Collar Tubing

Down Hole Motor

Washover Mill Drilling JarHole Opening Tool Stabilizer Junk Basket

Down Hole Tools

X-mas TreePumping Rod

BOPChock & Kill ManifoldBOP Control System

BOP

Well Head Tools

MWD/LWD

Elevator Tong Elevator Spider Slip

Rig Floor Tools

HH May Provide The Following Oil Equipment

HH Products

Compressor

80 HH Products

Booster for Air Drilling

Camp

Iron Roughneck

Processing & Interpretation Equipment

Acquistion Equipment

EngineeringMud Material

Fracturing Equipment Engineering

Fracturing Pump UnitFracturing Unit

Documents

2015 HH group brochure-email