2014 Catalogue - Alarmtec

2014 Catalogue

Specialist Alarm Test Equipment

Alarm Troubleshooting Solutions

ACT Meters International LtdAbout

ContentsBattery Testing Equipment & Accessories ........................................................................................... 4 - 7

Test Equipment .................................................................................................................................... 8 - 13

Calibration Solutions .......................................................................................................................... 14 - 17

Alarm Troubleshooting Solutions .................................................................................................... 18 - 22

ACT Meters International Ltd is a British manufacturing supplier of specialist alarm test equipment

and false alarm troubleshooting solutions. We are responsible for all export sales from outside of

the UK. Our product range includes Battery Testers, InHouse Calibration Solutions, Electrical Test

Equipment and Alarm Protection Suppressors and Filters.

We supply to a global network of distributors from across North America, Europe and Australia. Our

equipment is ideally suited for alarm installers, electricians and electrical engineers.

ACT Meters International Ltd

Address: The Old Smithy, Church Road, Rainford, Merseyside, WA11 8HD, United Kingdom

Telephone: +44(0)1744 886660

Fax: +44(0)1744 886661

Website: www.actmeters.com

Email: [email protected]

Batt

ery

Test

ing

Equi

pmen

t

Intelligent Battery TesterACT GOLD PLUS

4Call: +44(0)1744 886660

Features

Take seconds to receive accurate Ah capacity

results of the most common lead acid battery

types using the GOLD PLUS Intelligent Battery

Tester. Standby SLA, cyclic GEL and car

FLOODED – the GOLD PLUS tests both 6V and

12V battery types quickly.

• Simulates a full 20 hour discharge test in seconds

• Designed for standby SLA, cyclic GEL and car FLOODED batteries

• Tests 6V batteries between 1.2Ah and 12Ah, and 12V batteries between 1.2Ah and 100Ah

• Displays DC Voltage and Ah capacity available

• Unique calibration control allows the battery tester to be calibrated to non standard battery

types

• Simple operation, without confusing conversion rates or user interpretation needed

• As recommended by battery manufacturers, recharge or replace a battery when its rated Ah

capacity falls below 65%

• Provides clear and accurate Ah readings enabling replacement batteries to be identified quickly

and easily

• Uses advanced pulse load technology to analyse Ah capacity, based on the battery’s temperature

and state of charge

• Advanced pulse load technology is significantly more accurate than measuring voltage and

internal resistance and does not deplete the battery unlike a conventional load tester

• Offers reliable, continuous testing

• Powered by the battery under test, with ultra low heat generation

• Perfectly suited as a bench tester or out on the job with the engineer

• Profitable; show the customer the result and increase your own battery sales by recommending

a new battery for their system

Batt

ery

Test

ing

Equi

pmen

t


SpecificationsACT GOLD PLUS

5

Operating Voltage 6V and 12V DC

Reverse Polarity Protection Red LED Indication

Max Input Voltage 15VDC

Battery Types SLA, GEL and FLOODED

Battery Sizes 6V (1.2Ah - 12Ah) and 12V (1.2Ah - 100Ah)

Ah Capacity Test Simulated 20 hour (C20) load test to 10.50VDC

Ah Calibration Calibrated at 0 (zero) position to brand new fully charged premium brand SLA batteries

rated at C20hour at 20C (68˚F)

Ah Result Based on the battery under test temperature and state of charge

Ah Adjustment Provides ± Ah adjustment to brand new fully charged standby SLA, cyclic GEL and car

FLOODED lead acid batteries

Battery Table Recharge or replace battery when Ah capacity available falls below 65% of the battery’s

stated capacity

Display Backlit LCD

Flat Battery Warning 6V <5.30VDC, 12V <10.50VDC

Repeat Test Operation Can perform repeat tests continuously

DCV Accuracy ± 2% of displayed reading

Ah Accuracy ± 10% Fully charged premium brand C20 hour rated SLA batteries at 20 - 25˚C (68 - 77˚F)

Applied Pulse Load 6A 1.2Ah - 7Ah, 18A 8Ah - 100Ah

Ah Calibration Adjustment Approx ± 25 dgts

Case Construction High Impact ABS

Size 210(H) x 110(W) x 41(D)mm

Package ACT GOLD PLUS Intelligent Battery Tester, ACT GPTL Test Leads, ACT 430N Soft Carry Case,

ACT 3532 Terminal Connectors, Sample BTL Labels, Operating Instructions and Certificate

of Calibration

Additional Accessories

ACT BTL (250 labels)

Battery Tested Labels giving

insertions for Temperature,

Volts, Ah Readings, User

Initials & Date Tested

ACT 430N

Hard wearing carry case

with extra padding for

protecting the ACT GOLD

PLUS model

ACT 3532

Terminal Connectors used

with the GOLD PLUS model

for testing batteries with

recessed terminals

ACT GOLD PLUS CALKIT

InHouse kit for annual

calibration of the GOLD

PLUS model, more details

on page 17

Luminaire Battery Tester

Batt

ery

Test

ing

Equi

pmen

t

Call: +44(0)1744 886660

ACT CD4000

6

Take minutes not hours to test NICAD luminaire

batteries used in stand-alone emergency

lighting systems. The CD4000 performs 1 and

3 hour duration tests in minutes on 2.4V - 12V

rechargeable Nickel-cadmium batteries.

• Simulates a 1 hour duration test in under 6 minutes

• Identifies a low capacity or defective battery within 60 seconds

• Simulates a 3 hour duration test in under 12 minutes

• Testing the battery twice in succession will perform a 3 hour duration test on the battery

• Leaves a minimum 30% capacity available in the battery to operate the luminaire after testing

• Tests rechargeable Nickel-cadmium batteries from 2.4V – 12V above 1.5Ah

• All automatically with testing, pass and fail LED indicators

• Powered by the battery under test for all day reliability

• Robust and portable for out on the job site conditions

• Life time calibration

• Microprocessor controlled and contains no internal adjustments for recalibration

• Accuracy maintained by using the test leads supplied, if these become worn or damaged they

can be easily replaced

• Reverse polarity protection

• The 10Amp quick blow fuse is user replaceable and easily accessible on the top of the unit

Features

Batt

ery

Test

ing

Equi

pmen

t


SpecificationsACT CD4000

Input Sockets RED+, BLACK- (4mm)

Test Leads 2m length, heavy duty with crock clips (ACT Part No: CD4000TL)

Power Supply Self powered by the battery under test (step-up inverter)

LED Indication RED/Fail, YELLOW/Testing and GREEN/Pass

Acceptable Batteries 2.4V to 12V NICAD

Minimum Battery Capacity Greater than 1.5Ah

Current Drawn During Test 0.5Amp

Test Times Normally under 6 minutes dependent on battery voltage

Heat Dissipation Between 23 to 115 Watts

Ambient Temperature -5 to 40C

Max. Heatsink Temp 100˚C

Input Protection Reverse Polarity and High Voltage Protection (18VDC max)

Input Fuse 10Amp Quick Blow Blade Type

Enclosure Flame Retardent Metal

Size 107(H) x 167(W) x 65(D)mm

Weight 1.5Kg

Package ACT CD4000, Spare Fuse, Test Leads and Operating Instructions

Call: +44(0)1744 8866608

Autoranging Multimeter CATIIIACT AVO300

Test

Equ

ipm

ent

Tough and compact, this digital multimeter

offers a range of measurement modes for AC

and DC applications, resistance and current

measurement.

• Fully autoranging

• Enables measurements on AC and DC voltage to 1000V, AC/DC current up to 10A and resistance

from 0.1Ω to 40MΩ

• Resistance, continuity and diode testing

• Resistance can be measured directly on the ohms range from 0Ω up to 1.999MΩ

• Continuity buzzer range checks low resistance between two points, sounding if the resistance is

less than 50Ω

• Diode range exists for testing forward and reverse bias operation of transistors and diodes

• Fused inputs protect both the user and the instrument in the case of excess current

• Data hold function allowing test data to be temporarily stored on screen for easy reference

• Mode function enables the selection of AC and DC measurement

• Separate bttery and fuse compartment

• Easy navigation with large buttons and central dial

• Large high contrast 3½ digit display

• Armoured casing

• Built-In rear stand

Features


SpecificationsACT AVO300

Test

Equ

ipm

ent

Specifications Range Max Resolution Basic Accuracy

DC Voltage 400.0mV4.000V40.00V400.0V1000V

0.1mV1mV10mV100mV1V

+0.5% of rdg ±2 digits+0.8% of rdg ±2 digits

+1% of rdg ±2 digits

AC Voltage 4.000V40.00V400.0V1000V

1mV10mV100mV1V


+1.5% of rdg ±5 digits

DC Current 400.0μA4000μA40.00mA300.0mA10A

0.1μA1μA10μA100μA10mA



Resistance 400.0Ω4.000kΩ40.00kΩ400.0kΩ4.000MΩ40.00MΩ

0.1Ω1Ω10Ω100Ω1kΩ10kΩ

+0.8% of rdg ±5 digits+0.8% of rdg ±2 digits


Diode Test (Test Current) 0.3mA typical/Open <1.5V (Resolution> 1mV (Accuracy) +10% of rdg +5digits

Insulation Class2, Double insulation

Overvoltage Category CATIII 600V or 1000V CAT II

Display 4000 counts LCD display, 25.4mm high

Low Battery Indication A battery symbol is displayed when the battery voltage drops below the operating level

Over-range OL’ mark indication

Measurement Rate 2 times per second nominal

AutoPower Off Meter automatically shuts down after approx. 15 minutes of inactivity

Operating Environment 10˚C to 50˚C (14˚F to 122˚F) at < 70% relative humidity

Power One 9V Battery, NEDA 1604, IEC 6F22

Dimensions 182(H) x 82(W) x 55(D)mm

Weight 375g

Package AVO300 Autoranging Multimeter, Standard RED/BLACK Lead Set with Probes and

Operating Instructions

CALMASTER Calibration CheckBox for Multimeters

ACT CALMASTER

Ensure your multimeters are always deemed accurate with CALMASTER. This useful

bench tester checks that meter ranges are to calibration standard. It’s quick and easy

to use - and reduces the number of meters sent away unnecessarily for calibration. For

full product information turn to page 14.

Call: +44(0)1744 88666010Test

Equ

ipm

ent

mA Current ClampACT CA60

Essential for alarm installers, the ACT CA60 will

register low mA current readings without the

need for disconnecting circuit wires. Used with

your own multimeter it will measure milliamps

as well as amps.

Features

• Enables mA current readings to be taken without disconnecting the circuit wires

• Measures AC/DC current from 10mA to 60Amps

• Works with any multimeter with 200mV or/and 2V ranges for direct readout input impedance of

at least 1MΩ

• Fits into tight spaces within the circuit panel or a wire bundle to take readings

• LED indicator lights up when clamp meter power is low

• Recording such readings for future reference allows detector and cable faults caused by abnormal

currents to be identified easily

Output 1mV/10mA, 1mV/100mA

Input Resistance 10K

Jaw Opening 9mm

Power Requirement 9V Battery

Battery Life 100 hours typical with Alkaline

Low Battery Indicator RED LED

Size 195(H) x 70(W) x 33(D)mm

Output Coll cable with straight banana plug

Weight 250g

Package ACT CA60mA Current Clamp with test plugs and Operating Instructions

Email: [email protected] Te

st E

quip

men

t

Telephone Test SetACT 452

A trusted tool for telecom installations and

maintenance - checks for potential faults on a

telephone line where an alarm communicator

is fitted. Robust and simple to use.

Features

• Safe to use on analogue and digital lines

• Digital Service Protection (DSP) allows safe operation where telephone wiring may carry digital

signals, hazardous voltages or fault connections

• TALK and MONITOR modes enable lines to be tested without disrupting signals

• POL test button with GREEN/RED LEDs show correct or reverse A/B polarity connection

• Built-in over current protection against 230VAC and lightning surges

• Active polarity and fault LED indication

• Battery saving auto power on/off

• 3 Position Volume Boost Control with easy tone/pulse selection

• Finger tip microphone mute

• Rugged, drop proof design with belt hook

Long Line Operation With a 48V Feed > 5K Ω Loop, Minimum Current < 10Ma

DC Resistance Off-Hook Talk Mode: < 300 Ω, On-Hook Idle: > 5M Ω (10Ua @ 48VDC)

Monitor >5MΩ (20Ua @ 100VDC)

Monitor Impedance 100K Ω @ 1Khz

Dial Pulse 100Pps Break 60%

DTMF/Tone Dial Level -3Dm Typical

Flash/Timed Break Recall 100Ms (Switchable 600Ms, 300Ms)

Memory Dial 32 Digit Last Number Redial

PBX Pause 2 seconds

Low Battery Indication 2 Hours remaining continuous use

Automatic Power Shut Off Five minutes after disconnection

Package ACT 452 Telephone Test Set, crock-clip leads and Operating Instructions

Call: +44(0)1744 88666012Test

Equ

ipm

ent

Digital Sound Level MeterACT 1345

This Digital Sound Level Meter has a wide

dynamic range from 30 to 130dB, with

frequency weightings A and C for human sense

or machine monitoring purposes.

Features

• Meets IEC 651 Type 2 requirements

• Large, easy-to-read LCD display

• Dual range measurement (HI/LO)

• A & C frequency weighting

• Electret condenser microphone for high accuracy and long term stability

• Data Hold, Max Hold and low battery indication

Measuring Range LOW 35 to 100dB, HIGH 65 to 135dB (A & C)

Resolution 0.1dB

Accuracy ±1.5dB

Frequency 31.5Hz to 8kHz

Time Weighting Fast/Slow (A & C)

Microphone ½” Electret Condenser

Power Supply 1 x 9V Battery


Weight 230g

Package ACT 1345 Digital Sound Level Meter, Case and Operating Instructions

Email: [email protected] Te

st E

quip

men

t

Audible Circuit TesterACT Verifier

Verifier enables an alarm installer to quickly

walk-test a circuit installation and audibly

trace hidden cables, test resistance and locate

intermittant faults in a fraction of the normal

time. An ideal tool to use during commissioning,

maintenance and take-over inspections and

troubleshooting first fix installations.

Features

• Uses sound to detect

• Connects to the circuit and passes an audible tone throughout cables and circuit devices

• Audible tone is heard through the supplied inductive amplifier probe when passed near the

cable or individual device

• Healthy devices will produce a clear, constant tone

• Troublesome devices will produce a distorted, varying tone

• Traces hidden cables and pinpoints cable faults

• Identifies devices connected to unmarked cables

• Identifies good and faulty magnetic contacts

• Tests operation and sensitivity of PIR motion detectors

• Verifies sensitivity adjustment of shock sensors

• Audibly Test Normally Closed and End of Line Resistance Circuits

Variable Resistance Tones Low 0Ω to high 250Ω

Low <250Ω to high 25KΩ

Low <25KΩ to high 250KΩ

Battery Type 9V (PP3) Alkaline

Enclosure Flame retardant ABS

Size 110(H) x 63(W) x 20(D)mm

Weight 150g

Package ACT VERIFIER, Inductive Amplifier Probe with adjustable volume control, Magnetic Test

Screwdriver, Carry Case and Operating Instructions

Call: +44(0)1744 88666014Calib

rati

on S

olut

ions

ACT CALMASTERCalibration CheckBox for MultimetersIdeal for companies that have many

multimeters in service that need calibrating

regularly. CALMASTER is a useful bench

tester for checking that meter ranges are to

calibration standard. It’s quick and easy to

use - and reduces the number of meters sent

away unnecessarily for calibration.

Features

Resistance 00.0Ω up to 100K

AC Volts 0.0 - 230VAC

DC Volts 0.0 - 36VDC

DC Current 1mA, 10mA, 100mA and 1 Amp

Fuse Protection 250VAC 1.6 Amp Max


Weight 2.2kg

Package ACT CALMASTER, Test Leads, Test Labels and Operating Instructions

• Performs InHouse testing and verification of multimeter ranges

• Check accuracy at any time to ensure meter ranges meet BS ISO9001:2008 requirements

• Works in conjunction with one single calibrated multimeter - the only meter that should ever be

sent away to be calibrated

• Compares the accuracy between the meter under test and calibrated meter

• Allows the engineer to test the various ranges for AC/DC Voltage, Resistance and DC Current.

• Each range reading can be compared against the calibrated meter and logged onto the Calibration

Test Result Sheet provided

• If readings from the meter under test are within ±5% of the calibrated meter, it is deemed

accurate and can be passed

• Simple in operation

• Ideal for companies that have many multimeters in service

Email: [email protected] Ca

libra

tion

Sol

utio

ns

Calibration CheckBox for ACT IBTsACT BATMASTER

Verify accuracy of all ACT Intelligent Battery

Testers with BATMASTER. This InHouse bench

tester allows the engineer to check accuracy

at any time and carry out recalibrations when

necessary, using an ACT CALKIT. A cost effective

solution for those who have many ACT battery

testers in service.

Features

Pass Rate Voltage Equals ±5% and Ampere Hour: 7Ah - 9Ah

Operating Temperature 20 - 30ºC (68 - 86ºF)

RED LED Indicates to replace BATMASTER battery (Yuasa NP7Ah-12V)


Weight 3kg

Package ACT BATMASTER, Test Leads and Operating Instructions

• Designed for ACT RED, GOLD and GOLD PLUS Intelligent Battery Testers made by ACT Meters Ltd

• Allows an engineer to verify the accuracy of each battery tester at anytime, quickly and easily

• Works in conjunction with your own calibrated multimeter - this is the only meter that you must

ensure is calibrated to standard

• Compares the DCV accuracy between the battery tester under test and calibrated meter

• Test and verify the accuracy of the battery tester under test against the rated Ah capacity of the

BATMASTER unit

• If readings from the battery tester under test are within ±5% of the calibrated meter, it is deemed

accurate and can be passed. If however, the Ah readings are low or erratic, the engineer can

recalibrate using the recommended ACT CALKIT

• BATMASTER has connection posts for the battery tester under test and calibrated meter

• Simple LEDs give unit status indication

Call: +44(0)1744 88666016Calib

rati

on S

olut

ions

For ACT Intelligent Battery TestersACT CALKITS

RED IBT CALKIT

Enables InHouse Calibration of your ACT

RED Intelligent Battery Tester. Each CALKIT

consists of new calibrated test leads, clips,

diode, replacement labels, sample BTL labels

and instructions. Please note, soldering is

required.

GOLD IBT CALKIT


GOLD Intelligent Battery Tester. Each CALKIT

consists of new calibrated test leads, clips,

diode, replacement labels, sample BTL labels

and instructions. Please note, soldering is

required.


For ACT Intelligent Battery Testers

17

ACT CALKITS

Calib

rati

on S

olut

ions

GOLD PLUS IBT CALKIT


GOLD PLUS Intelligent Battery Tester. Each

CALKIT consists of replacement calibrated

plug-in test leads, new front labels and

instructions.

ACT LB1

Used for recording calibration data. Each roll

contains 250 labels with insertions for Serial

Number, User Initial, Calibration Date and

Recalibration Due Date.

Call: +44(0)1744 88666018Alar

m T

roub

lesh

ooti

ng S

olut

ions

Alarm Troubleshooting

Stop induced AC and nearby lightning from

causing false alarms and system malfunctions

with the ACT 1313. This 12V spike suppressor

decouples AC from cables and clamps the supply

against spikes.

ACT 1313

• Protects alarm control equipment and

detectors from induced AC and nearby lightning

• Decouples induced AC from every alarm cable connected to the control panel

• Clamps the 12VDC supply against spikes to the control panel, alarm detectors and plug-on

communicators

• Fit as standard - just one to the control panel and each PSU

• Connect RED+ and BLACK- across the 12VDC auxiliary supply and GREEN to mains Earth

12V Spike Suppressor

Stop induced AC and nearby lightning from

causing system malfunctions on the fire

alarm panel with the ACT 1414. This 24V spike

suppressor decouples AC from cables and

clamps the supply against spikes.

ACT 1414

• Protects fire alarm system from induced AC

and nearby lightning

• Decouples induced AC from every alarm cable connected to the control panel

• Clamps the 24VDC supply against spikes

• Connect RED+ and BLACK- wires across any 24V fire alarm zone, connect GREEN to mains Earth

• NOTE: Only one 24V spike suppressor is required for the control panel

24V Spike Suppressor

Email: [email protected] Al

arm

Tro

uble

shoo

ting

Sol

utio

ns


This advanced 12V spike suppressor has two

functions. Firstly it will eliminate false alarms

caused by induced AC and RFI interference.

Secondly, it features a bi-coloured LED allowing

cable faults supplying DC power to motion

detectors or any 12V detection device to be

identified easily.

NEW ACT 1313 PLUS

• Eliminates false alarms caused by induced AC and RFI interference

• Identifies cable faults supplying DC power to motion detectors or any 12V detection device

• Eliminates induced AC and RFI

• Attenuated by up to 60dB on all DC power cables

• Bi-coloured LED identifies any potential DC power overload or low resistance fault on any cable

connected

• Connect directly between the control panel or PSUs auxiliary 12VDC supply to motion detectors

or other powered detection device

• Twin terminal blocks, 2X RED+ and 2X BLACK-, enable power cables to be grouped and connected

easily

Bi-coloured LED

• GREEN shows ‘no fault’ whereas RED indicates ‘fault exists’

• If the RED LED is lit, simply disconnect DC power cables one at a time to identify the troublesome

circuit

• If the RED LED is lit with all power cables removed, this indicates that the panel or PSU DC voltage

is insufficient to power motion sensors and other detection devices effectively against false

alarms

Advanced 12V Spike Suppressor

Call: +44(0)1744 88666020Alar

m T

roub

lesh

ooti

ng S

olut

ions


Providing up to 4,500 Amp spike suppression,

the ACT 2323 protects all security and fire

alarm panels, CCTV cameras and access control

equipment against nearby lightning.

ACT 2323

• Provides up to 4,500 Amp continuous spike

protection across live, neutral and Earth

• Prevents false alarms and system malfunctions caused by nearby lightning

• Protects all security and fire alarm panels, CCTV cameras, access control equipment and

security lighting

• Neat modular shape, fits easily with simple parallel connections to LNE

230V Mainspike Suppressor

Prevents electrical RFI from affecting the 12VDC

supply on metal control panels. An essential

alarm troubleshooting solution.

ACT 1166

• Protects steel boxed control panels against

RFI signals

• Prevents RFI signals from feeding back

from mains Earth and onto the 0V - this can affect the 12VDC supply to the control panel,

communicator and alarm detectors

• Connects in line with mains Earth inside the control panel

Earth Line Choke

Email: [email protected] Al

arm

Tro

uble

shoo

ting

Sol

utio

ns


Protects PIRs and dual detectors against RFI

signals and stabilises the DC supply in the event

of a DC spike.

ACT 1376

• Stops RFI from affecting PIRs and dual

detectors

• Stabilises and powers PIRs and dual detectors

for up to 250ms in the event of a DC spike

• Eliminates replacing non-defective motion sensors

• Fits either inside or behind the detector with the 12VDC supply connected through

PIR Stabiliser

A powerful 1Amp rated RFI filter used to reduce

RFI from affecting alarm detectors, sounders and

DC access control circuits. They are particularly

beneficial where data corruption occurs on

keypads and LIMs.

ACT 2468

• Powerful 1Amp rated RFI filter

• Reduces RFI to alarm detectors, sounders

and DC access control circuits

• Works on 12V and 24VDC normally closed, end-of-line and fire alarm circuits

• Offers virtually no resistance to DC circuits but will reduce RFI signals between 2.5Hz and

800MHz, allowing them to work quicker and become more cost effective than re-wriring in

screened cables

• Connects between alarm circuit wiring and control equipment

• Supplied as a 1 x 8 block which can be snapped apart to make 2 x 4 way or 4 x 2 way

8 Way RFI Filter

Call: +44(0)1744 88666022Alar

m T

roub

lesh

ooti

ng S

olut

ions


Enables analogue alarm systems to operate

securely on broadband and ADSL lines. The

ACT 4343, housed within a surface mountable

box, provides the correct filtering of signals to

allow simultaneous use of both the auto dialler

and broadband services. Suitable for REDCARE,

digital communicators and speech dialers.

ACT 4343

• Allows analogue alarm signals to operate securely on broadband and ADSL lines

• Meets SIN 346 requirements

• Provides the correct filtering of signals to allow simultaneous use of both the auto dialler and

broadband services

• Surface mountable box with screw terminals for quick and easy connection

• Fits adjacent to the panel or centre plastic section containing the PCB

• Terminal connections can be wired directly from the BT line and alarm autodial equipment

• Suitable for REDCARE, digital communicators and speech dialers

• ABS Box Size: 85(H) x 85(W) x 35(D)mm

ADSL Broadband Filter


ACT Meters International Ltd

Address: The Old Smithy, Church Road, Rainford, Merseyside, WA11 8HD, United Kingdom

Telephone: +44(0)1744 886660

Fax: +44(0)1744 886661

Website: www.actmeters.com


Documents

2014 Catalogue - Alarmtec