IEEE Catalog Number: ISBN:

CFP14801-POD 978-1-4799-5163-5

2014 17th International Conference on Electrical Machines and Systems (ICEMS 2014)

Hangzhou, China 22-25 October 2014

Pages 1-696

1/5

TABLE OF CONTENTS

VOLUME 1

INFLUENCE OF MAGNET LAYER NUMBER ON ELECTROMAGNETIC PERFORMANCE OF FERRITE INTERIOR PERMANENT MAGNET SYNCHRONOUS MACHINE ......................................................... 1

Fei, Weizhong ; Liang, Wenyi ; Luk, Patrick Chi-Kwong

ANALYSIS AND DETERMINATION OF MECHANICAL BEARING LOAD CAUSED BY UNBALANCED MAGNETIC PULL .................................................................................................................................. 8

Ruf, Andreas ; Schroder, Michael ; Putri, Aryanti ; Franck, David ; Hameyer, Kay

CALCULATION METHOD FOR SINGLE-PHASE LINE-START PERMANENT MAGNET SYNCHRONOUS MOTOR................................................................................................................................................ 16

Suzuki, Yudai ; Takegami, Tsuneo ; Tsuboi, Kazuo ; Hirotsuka, Isao ; Nakamura, Masanori

INVESTIGATE THE INFLUENCE OF MAGNETIC BRIDGE DESIGN ON MECHANICAL STRENGTH AND ELECTROMAGNETIC CHARACTERISTICS IN HIGH SPEED IPM MACHINES ......................................................................................................................................................................... 22

Rao, Jing ; Qu, Ronghai ; Ma, Jimin ; Xu, Wei

ANALYTICAL MODELING OF MULTI-SEGMENT AND MULTILAYER INTERIOR PERMANENT MAGNET MACHINES ............................................................................................................................ 28

Zhu, Li ; Jiang, S.Z. ; Zhu, Z.Q. ; Chan, C.C.

AN OPTIMIZED METHOD BASED ON MAXIMUM TORQUE-PER-AMPERE CONTROL FOR PERMANENT MAGNET SYNCHRONOUS MOTOR................................................................................................... 34

Yang, Le ; Yu, Kexun ; You, Qilin ; Xin, Qingming

RESEARCH ON OPTIMAL DESIGN OF PERMANENT MAGNET SYNCHRONOUS MOTORS BASED ON FIELD-CIRCUIT COUPLED METHOD .................................................................................................... 37

Yaojing, Feng ; Shoudao, Huang ; Kai, Yang ; Xuan, Wu

INFLUENCE OF MAGNET SHAPE ON TORQUE BEHAVIOR IN SURFACE-MOUNTED PERMANENT MAGNET MOTORS ................................................................................................................................ 44

Lin, Huangda ; Wang, Dong ; Liu, Dezhi ; Chen, Junquan

DEMAGNETIZATION CONDITIONS COMPARISON FOR LINE-START PERMANENT MAGNET SYNCHRONOUS MOTORS ........................................................................................................................... 48

Lu, Wei-fu ; Zhao, Hai-sen ; Liu, Shi

OPTIMIZATION AND PERFORMANCE ANALYSIS OF E-CORE AND C-CORE FLUX-SWITCHING PERMANENT-MAGNET MACHINES FOR ELECTRIC VEHICLE APPLICATIONS ................................................................................................................................................................. 53

Li, Yitong ; Xu, Wei

MITIGATION OF ACOUSTIC NOISE BY MINIMIZE TORQUE AND RADIAL FORCE FLUCTUATION IN FAULT TOLERANT PERMANENT MAGNET MACHINES ................................................... 60

Mao, Yanxin ; Liu, Guohai ; Chen, Qian ; Zhou, Huawei

ROTOR STRENGTH ANALYSIS FOR HIGH SPEED PERMANENT MAGNET MACHINES .............................. 65Chen, Liangliang ; Zhu, Changsheng

COMPARISON OF CONVENTIONAL AND CONSEQUENT POLE INTERIOR PERMANENT MAGNET MACHINES FOR ELECTRIC VEHICLE APPLICATION........................................................................ 70

Wu, Leilei ; Qu, Ronghai

OPTIMIZATION DESIGN OF LINE-START PERMANENT MAGNET SYNCHRONOUS MOTOR BASED ON ANT COLONY ALGORITHM..................................................................................................................... 75

Xie, Ying ; Li, Jixing ; Yang, Zhongxue ; Qu, Chunmei

DESIGN OF A NOVEL AXIAL-RADIAL FLUX PERMANENT MAGNET MOTOR............................................... 80Wei, Xubiao ; Yang, Kai ; Pan, Zhicheng ; Xie, Hongqin ; Zhu, Cheng ; Zhang, Yingli

EXPERIMENTAL STUDY OF LOSSES DURING HIGH-SPEED CONSTANT-VOLTAGE OPERATION OF THREE-PHASE SQUIRREL-CAGE INDUCTION MOTORS ...................................................... 85

Goto, Satoshi ; Hirotsuka, Isao ; Nakamura, Masanori ; Tsuboi, Kazuo ; Mizuno, Takayuki

SLIP FREQUENCY CORRECTION METHOD FOR INDIRECT VECTOR CONTROL SYSTEM CONSIDERING PARAMETERS DEVIATION .............................................................................................................. 88

Ding, Mengyu ; Gu, Chenglin

SOFT STARTING CONTROL SCHEME FOR THREE-PHASE INDUCTION MOTOR FED BY PWM AC CHOPPER.......................................................................................................................................................... 92

Thanyaphirak, Veera ; Kinnares, Vijit ; Kunakorn, Anantawat

RESEARCH OF THE INFLUENCE OF DIFFERENT PWM INVERTERS ON THE IRON LOSSES FOR INDUCTION MOTORS ............................................................................................................................................ 96

Sun, Zhi-Cheng ; Shen, Jian-Xin ; Jin, Meng-Jia ; Hao, He

ANALYSIS OF ELECTROMAGNETIC TORQUE OF INDUCTION MACHINES WITH THE LOAD TORQUE CHANGES SUDDENLY .................................................................................................................... 101

Cai, Xinjian ; Wu, Zhenxing ; Sun, Le

RESEARCH ON A STATIC EXCITATION CONTROL METHOD FOR THE HIGH-POWER INDUCTION GENERATOR WITH A H-BRIDGE CASCADED CONVERTER TOPOLOGY ............................. 107

Chi, Sun ; Liang-deng, Hu ; Sheng, Ai

PREDICTIVE CURRENT CONTROL FOR DUAL THREE PHASE INDUCTION MACHINE WITH PHASE LOCKED LOOP BASED ELECTROMOTIVE FORCE PREDICTION ......................................... 114

Zhang, Jie ; Chai, Jianyun ; Sun, Xudong ; Lu, Haifeng

A DIRECT TORQUE CONTROL STRATEGY OF FIVE-PHASE INDUCTION MOTOR WITH DUTY CYCLE OPTIMIZATION ................................................................................................................................... 118

Wang, Ting ; Yang, Jiaqiang

LOSS MINIMIZATION OF SPEED CONTROLLED INDUCTION MACHINES IN TRANSIENT STATES CONSIDERING SYSTEM CONSTRAINTS.................................................................................................. 123

Hu, Zheng ; Liu, Qian ; Hameyer, Kay

STATOR WINDING DESIGN OF INDUCTION MOTORS FOR HIGH EFFICIENCY ......................................... 130Zhang, Li ; Huang, Yunkai ; Dong, Jianning ; Guo, Baocheng ; Zhou, Tao

ANALYTICAL METHOD FOR STARTING PERFORMANCE CALCULATION OF INDUCTION MOTORS CONSIDERING SKIN EFFECT AND LEAKAGE FLUX SATURATION.............................................. 135

Run-hao, Piao ; Haisen, Zhao ; Dongdong, Zhang ; Jiaxuan, Li

RESEARCH ON ELECTROSTATIC SHIELD FOR DISCHARGE BEARING CURRENTS SUPPRESSION IN VARIABLE-FREQUENCY MOTORS.......................................................................................... 139

Quan, Jing ; Bai, Baodong ; Wang, Yu ; Liu, Weifeng

COMPARISON BETWEEN INDUCTION MACHINE AND INTERIOR PERMANENT MAGNET MACHINE FOR ELECTRIC VEHICLE APPLICATION........................................................................................... 144

Guan, Y. ; Zhu, Z.Q. ; Afinowi, I.A.A ; Mipo, J.C. ; Farah, P.

THE RESEARCH OF MARINE SHAFT GENERATOR SYSTEM BASED ON BRUSHLESS DOUBLY-FED MACHINE .............................................................................................................................................. 151

Gao, Ju-ming ; Wan, Shan-ming ; Liu, Li-li

FIVE-LEG VOLTAGE SOURCE INVERTER FOR DRIVING TWO SINGLE-PHASE INDUCTION MOTORS ................................................................................................................................................... 156

Dangeam, Sirichai ; Kinnares, Vijit

ANALYTICAL INVESTIGATION OF SIDEBAND TORQUE RIPPLE IN INDUCTION MACHINE DRIVE WITH SPWM AND SVPWM TECHNIQUES.................................................................................................. 162

Liang, Wenyi ; Fei, Weizhong ; Luk, Patrick Chi-Kwong

DTC STRATEGIES DEDICATED TO IM DRIVES FED BY REDUCED-STRUCTURE INVERTERS EMULATING THE CONVENTIONAL ONE: APPLICATION TO LOW-COST AUTOMOTIVE ACTUATORS ....................................................................................................................................... 169

Ouarda, Ameni ; Nouira, Imen ; Badsi, Bassem El ; Masmoudi, Ahmed

ANALYSIS AND OPTIMIZED CONTROL OF EMERGENCY TRACTION BY STORAGE BATTERY FOR URBAN RAIL TRANSIT VEHICLE ................................................................................................. 175

Wang, Ke ; Ge, Qiongxuan ; Li, Yaohua

A NEW ACTIVE DYNAMIC VOLTAGE EQUALIZATION TECHNOLOGY FOR THE SERIES CONNECTED ULTRACAPACITORS USED IN EV ................................................................................................... 180

Ding, Shichuan ; Cheng, Ming ; Hua, Wei ; Hu, Chao

MODELING AND SIMULATION OF SHIPBOARD DC POWER SYSTEM ........................................................... 186Guo, Jia ; Sun, Li ; Wang, Shuai ; Wang, Weixin

RESEARCH ON THE SWITCHED RELUCTANCE MACHINE DRIVE SYSTEM FOR ELECTRIC VEHICLES ................................................................................................................................................... 192

Guojun, Yu ; He, Cheng ; Yingjie, Huo

FUEL CELL APPLICATIONS ON MORE ELECTRICAL AIRCRAFT................................................................... 198Wu, Shanshan ; Li, Yongdong

AN INDUCTIVELY COUPLED POWER TRANSFER SYSTEM BASED POWER CONTROL FOR MOTOR DRIVES OF RAIL TRANSIT VEHICLE....................................................................................................... 202

Wu, Pengfei ; Shi, Liming ; Cai, Hua ; Li, Yaohua

A NOVEL MODULAR MULTISTAGE AXIAL-FLUX PERMANENT MAGNET MACHINE FOR ELECTRIC VEHICLES ................................................................................................................................................... 206

Xie, Hongqin ; Wei, Xubiao ; Yang, Kai

ALTERNATIVE STATOR FOR NEW BRUSHLESS DUAL-ROTOR FLUX-SWITCHING PERMANENT MAGNET MOTOR FOR EXTENDED RANGE ELECTRIC VEHICLES ...................................... 212

Xiang, Zixuan ; Quan, Li ; Zong, Zaiyun ; Gu, Yejun ; Yin, Jianing

PERFORMANCE COMPARISONS OF EMERGING MOVE-AND-CHARGE TECHNOLOGIES FOR ELECTRIC VEHICLES.......................................................................................................................................... 218

Li, Wenlong ; Chau, K.T. ; Ching, T.W.

OPTIMAL IDLING SPEED CONTROL OF DIRECT-DRIVE ELECTRIC VEHICLE LAUNCH IN CONSIDERATION OF DRIVE COMFORT ................................................................................................................. 225

Xiong, Ping ; Gu, Chenglin

A REVIEW OF ELECTROMAGNETIC FIELDS CONCERNS ON HEVS/EVS ...................................................... 229Wang, Lili ; Liu, Wei ; Wang, Jing ; Guo, Jianyu

COMPARISON OF DOUBLE-STATOR FLUX-SWITCHING PERMANENT MAGNET MACHINE AND DOUBLE-STATOR PERMANENT MAGNET SYNCHRONOUS MACHINE FOR ELECTRIC VEHICLE APPLICATIONS ...................................................................................................................... 234

Zong, Zaiyun ; Quan, Li ; Xiang, Zixuan

ANTI-SLIP CONTROL OF ELECTRIC VEHICLES BASED ON DISTURBANCE OBSERVER AND PID CONTROLLER ............................................................................................................................................... 240

Hu, Xing ; Zhang, Jianzhong ; Xu, Shuai

METHOD CONTROLLING FOUR SETS OF PERMANENT MAGNET SYNCHRONOUS MOTOR BY ONE INVERTER ON A RAILWAY VEHICLE...................................................................................................... 245

Ito, Takuma ; Inaba, Hiromi ; Kishine, Keiji ; Nakai, Mitsuki ; Ishikura, Keisuke

THE INFLUENCE ON CHARACTERISTICS OF MOVABLE LOOSELY COUPLED TRANSFORMER FROM METAL UNITS IN URBAN RAILWAY SYSTEM .......................................................... 250

Zhao, Yajie ; Du, Yumei ; Cail, Hua ; Zhang, Ruihua ; Shi, Liming

UTILIZATION OF THE BATTERY RECOVERY EFFECT IN HYBRID AND ELECTRIC VEHICLE APPLICATIONS ............................................................................................................................................ 254

Baumgardt, Andreas ; Bachheibl, Florian ; Gerling, Dieter

FAULT CURRENT ANALYSIS OF DC ELECTRIC RAILWAY FEEDING SYSTEMS USING SUPERCONDUCTING POWER CABLES .................................................................................................................... 261

Qian, K. ; Ohsaki, H. ; Tomita, M.

DEVELOPMENT OF SWITCHED RELUCTANCE TRACTION DRIVE FOR DUMPER BELAZ-7513 ..................................................................................................................................................................................... 267

Ptakh, G.K. ; Zvezdunov, D.A. ; Mustafaev, R.R. ; Shapovalov, V.S. ; Yakovenko, A.E.

RESEARCH OF DC MICRO-GRID BASED ON SUSTAINABLE BUILDINGS AND ELECTRIC VEHICLES ........................................................................................................................................................................ 269

Meng, Ming ; Guo, Mingwei ; Yuan, Yaning ; Jiang, Li ; Liu, Jian ; Hu, Dalong ; Cong, Haiyang ; Hao, Dan

AN EFFICIENT OFFSHORE WIND-WAVE HYBRID GENERATION SYSTEM USING DIRECT-DRIVE MULTITOOTHED ROTATING AND LINEAR MACHINES....................................................................... 273

Liu, Chunhua ; Chau, K.T. ; Lee, Christopher H.T. ; Lin, Fei

A NEW CONTROL STRATEGY OF UNINTERRUPTED DISTRIBUTED GENERATION SYSTEM............................................................................................................................................................................. 280

Wang, Jinlong ; Zhao, Jinbin ; Qu, Keqing ; Li, Fen

DEVELOPMENT TENDENCY OF POSITIVE FEEDBACK TYPE ANTI-ISLANDING OF AMERICAN COMPANIES.............................................................................................................................................. 286

Jeong, Ji-Won ; Kim, Dong-Hee ; Lee, Byoung-Kuk

FREQUENCY CONTROL OF ISLANDED MICROGRID BASED ON WIND-PV-DIESEL-BATTERY HYBRID ENERGY SOURCES ................................................................................................................... 290

Ma, Yiwei ; Yang, Ping ; Wang, Yuewu ; Zhou, Shaoxiong ; He, Peng

DC-BUS HYBRID ENERGY STORAGE DEVICES COOPERATION CONTROL STRATEGY FOR STAND-ALONE INVERTER UNDER IMBALANCE LOAD ............................................................................ 295

Wang, Weixin ; Duan, Jiandong ; Wu, Fengjiang ; Sun, Li ; Wang, Shuai

AN INTENTIONALLY SEAMLESS TRANSFER STRATEGY BETWEEN GRID-CONNECTED AND ISLANDING OPERATION IN MICRO-GRID .................................................................................................... 302

Wu, Shunyu ; Liu, Shirong ; Chen, Xueting ; Zheng, Lingwei ; Zhu, Jian

EQUIVALENT VOLTAGE AND CURRENT MODELS FOR PEM FUEL CELL GENERATION SYSTEM IN GRID-CONNECTED SYSTEMS .............................................................................................................. 308

Zhu, Jian ; Wu, Shunyu ; Luo, Xiaolan ; Liu, Shirong

A DAMPING INJECTION CONTROL OF ISOLATED BIDIRECTIONAL DC-DC CONVERTERS BASED ON THE LOAD PARAMETER IDENTIFICATION ...................................................................................... 314

Ge, Junjie ; Zhao, Zhengming ; Ma, Junchao ; He, Fanbo ; Yuan, Liqiang ; Lu, Ting

AN IMPROVED DISCHARGE CONTROL STRATEGY WITH LOAD CURRENT AND ROTOR SPEED COMPENSATION FOR HIGH-SPEED FLYWHEEL ENERGY STORAGE SYSTEM ............................ 318

Zhang, Xiang ; Yang, Jiaqiang

CAPACITOR VOLTAGE BALANCING OF A THREE-LEVEL BI-DIRECTIONAL BUCK-BOOST CONVERTER FOR BATTERY ENERGY STORAGE SYSTEM ............................................................................... 325

Shi, Haixv ; Wang, Kui ; Xiao, Xi ; Sun, Kai

POWER COMPENSATION IN THE MICROGRID BY SMES USING THE CURRENT SOURCE INVERTERS ...................................................................................................................................................................... 330

Kawahara, Yuki ; Masuda, Taku ; Miyatake, Masafumi ; Sakamoto, Orie

RESEARCH OF EV'S CHARGING AND DISCHARGING CONTROL CONSIDERING DEMAND RESPONSE ........................................................................................................................................................................ 334

Han, Huachun ; Xu, Haiping ; Zhao, Wei ; Yuan, Zengquan

THE STATOR BAR'S TRANSIENT TEMPERATURE CHARACTERISTIC OF EVAPORATIVE COOLING GENERATOR-MOTOR............................................................................................................................... 339

Chen, Jinxiu ; Ruan, Lin

EFFECT OF SLOT-AND-POLE COMBINATION ON THE FLUX-WEAKENING PROPERTIES OF FRACTIONAL-SLOT CONCENTRATED WINDINGS........................................................................................ 344

Chengyu, Wang ; Chuang, Liu ; Renhua, Jiang ; Jie, Zhang ; Yinhang, Ning

QUANTITATIVE ANALYSIS FOR INFLUENCE OF STRUCTURE PARAMETERS ON THE SLOT HARMONIC IN FRACTIONAL-SLOT PERMANENT MAGNET MOTORS .............................................. 349

Xu, Yanwu ; Zhao, Jiwen ; Fu, Xuemin

STUDIES ON THE STRUCTURE OF RADIAL VENTILATION CHANNEL TO IMPROVE THE COOLING CAPACITY OF LARGE TURBO GENERATOR STATOR.................................................................... 354

Bin, Xiong ; GuoBiao, Gu ; Lin, Ruan ; ZhenGuo, Li ; DePing, Fu ; Rui, Cao ; ShuQin, Guo ; JinShui, Gao

INFLUENCE OF THE STATOR DEFORMATION ON THE BEHAVIOUR OF A CLAW-POLE GENERATOR ................................................................................................................................................................... 358

Liu, S. ; Clenet, S. ; Coorevits, T. ; Mipo, J.C.

COMPARISON OF LOSS AND THERMAL ANALYSIS ACCORDING TO SQUARE CONDUCTOR DIVISION CONSIDERING SKIN EFFECT ....................................................................................... 363

Park, Dong-Hyuk ; Seo, Sang-Hyeok ; Kim, Yong-Jae ; Jung, Sang-Yong

RESEARCH ON SELF-EXCITED INITIATION OF A MEDIUM-VOLTAGE DC (MVDC) MULTIPHASE SYNCHRONOUS GENERATOR-RECTIFIER SYSTEM................................................................ 368

Yi, Xinqiang ; Wang, Dong ; Guo, Yunjun ; Su, Zhenzhong ; Wei, Kun ; Zhai, Xiaofei

ANALYTICAL CALCULATION OF DAMPER WINDING LOSSES IN LARGE HYDROGENERATORS................................................................................................................................................... 373

Lu, Yun ; Liu, Jianjun ; Zhou, Libing ; Kang, Huilin

TORQUE RIPPLE REDUCTION IN THREE-STAGE BRUSHLESS SYNCHRONOUS MOTOR BASED ON A-ß-? FILTER .............................................................................................................................................. 378

Ma, Peng ; Liu, WeiGuo ; Mao, Shuai ; Peng, Jichang ; Luo, Guangzhao

INFLUENCE OF MANUFACTURING TOLERANCES ON COGGING TORQUE OF IPMSM FOR EPS APPLICATION ......................................................................................................................................................... 382

Kim, Yong-Beom ; Kim, Hae-Joong ; Jung, Kyung-Tae ; Hong, Jung-Pyo

STATOR TEETH SHAPE DESIGN FOR TORQUE RIPPLE REDUCTION IN SURFACE-MOUNTED PERMANENT MAGNET SYNCHRONOUS MOTOR ........................................................................... 387

Seo, Kyung-Sik ; Kim, Yong-Jae ; Jung, Sang-Yong

NEW PERMANENT MAGNET SYNCHRONOUS MOTOR WITH REDUCED RARE EARTH MAGNETS ......................................................................................................................................................................... 391

Yamada, Akitoshi ; Miki, Ichiro

A LOW-COST PERMANENT MAGNET SYNCHOROUS MOTOR WITH SMC AND FERRITE PM....................................................................................................................................................................................... 397

Liu, Chengcheng ; Zhu, Jianguo ; Wang, Youhua ; Lei, Gang ; Guo, Youguang ; Liu, Xiaojing

COMPARISON OF ELECTRICALLY EXCITED AND INTERIOR PERMANENT MAGNET MACHINES FOR HYBRID ELECTRIC VEHICLE APPLICATION........................................................................ 401

Chu, W.Q. ; Zhu, Z.Q. ; Zhang, J. ; Ge, X. ; Liu, X. ; Stone, D. ; Foster, M.

THE SHAPE DESIGN OF IPMSM FOR THE EFFICIENCY IMPROVEMENT ..................................................... 408Kim, Dong-Yeong ; Kim, Gyu-Tak ; Shin, Heung-Kyo

COMPARATIVE STUDY OF NOVEL BIASED FLUX PERMANENT MAGNET MACHINE WITH DOUBLY SALIENT PERMANENT MAGNET MACHINE ........................................................................................ 415

Shi, J.T. ; Zhu, Z.Q. ; Wu, D. ; Liu, X.

CHARACTERISTIC ANALYSIS OF SPOKE-TYPE IPMSM CORRESPONDING TO THE RIB STRUCTURE .................................................................................................................................................................... 421

Hong, Chan-Hee ; Seol, Hyun-Soo ; Jun, Hyun-Woo ; Liu, Huai-Cong ; Lee, Ju

A FIRST-PROTOTYPE OF THE CLAW POLE TYPE HALF-WAVE RECTIFIED VARIABLE FIELD FLUX MOTOR..................................................................................................................................................... 425

Abe, Takashi ; Oba, Ryohei ; Higuchi, Tsuyoshi

A NOVEL CLAW POLE PERMANENT MAGNET MOTOR WITH SMC AND FERRITE PM ........................... 430Liu, Chengcheng ; Zhu, Jianguo ; Wang, Youhua ; Lei, Gang ; Guo, Youguang ; Liu, Xiaojing

DESIGN OF A TWELVE-PHASE FLUX-SWITCHING PERMANENT MAGNET MACHINE FOR WIND POWER GENERATION...................................................................................................................................... 435

Shao, Lingyun ; Hua, Wei ; Cheng, Ming

PREDICTIVE DIRECT POWER CONTROL FOR PERMANENT MAGNET LINEAR GENERATOR SIDE CONVERTER ............................................................................................................................... 442

Bao, Guangqing ; Wen, Jingyi ; Wang, Xiaolan ; Luo, Dongsong

DYNAMIC PERFORMANCE OF DC-LINK VOLTAGE FOR AUTOMOTIVE HYBRID EXCITATION BRUSHLESS STARTER/GENERATOR WITH TRPEZOIDAL BACK EMF................................ 447

Jiaqun, Xu ; Jie, Jiang

ELECTROMAGNETIC DESIGN AND ANALYSIS OF A NOVEL FLUX-CONCENTRATED TRANSVERSE FLUX PERMANENT MAGNET DISK GENERATOR .................................................................... 453

Yan, Jianhu ; Li, Qiang ; Lin, Heyun ; Feng, Yi

OPTIMAL DESIGN OF INNER EVAPORATIVE COOLING PERMANENT MAGNET WIND POWER GENERATOR ................................................................................................................................................... 458

Li, Wang ; Wang, Haifeng ; Gu, Guobiao

THE INFLUENCE OF STATOR POLE SHAPE AND ITS ARRANGEMENTS ON COGGING TORQUE FOR DOUBLE-SIDED AFPM GENERATOR............................................................................................. 463

Kim, Chang-Eob ; Jang, Joong-Keun ; Joo, Sung-Jun

DESIGN AND RESEARCH OF 5 MW PERMANENT MAGNET SYNCHRONOUS GENERATORS FOR WIND TURBINES ................................................................................................................................................... 467

Wei, Bei ; Wang, Xiuhe ; Zhao, Xiulei

DESIGN AND OPTIMIZATION OF A NINE-PHASE FLUX-SWITCHING PM GENERATOR FOR WIND POWER SYSTEMS .............................................................................................................................................. 471

Li, Feng ; Hua, Wei ; Cheng, Ming

ANALYSIS OF LOSSES IN AXIAL FIELD VARIABLE FLUX PERMANENT MAGNET SYNCHRONOUS MACHINE WITH MECHANICAL DEVICE ................................................................................ 478

Liu, Xiping ; Zhang, Chao ; Chen, Dong ; Huang, Yuefei ; Liang, Jianwei ; Wang, Tao

PERFORMANCE AND DEMAGNETIZATION ANALYSIS OF THE PERMANENT MAGNET GENERATOR WITH FSCW FOR SMALL SCALE WIND POWER SYSTEMS ..................................................... 483

Wang, Aimeng ; Wang, Chunmei ; Wang, Hui

GRID-CONNECTED CONTROL OF HIGH-SPEED PERMANENT MAGNETIC GENERATOR BASED ON Z-SOURCE INVERTER.............................................................................................................................. 488

Huang, Keyuan ; Jiang, Zhi ; Wang, Li ; Huang, Shoudao

INFLUENCE OF MAGNET POLE SHIFTING ON COGGING TORQUE FOR PMSG APPLICATION ................................................................................................................................................................. 495

Wang, Aimeng ; Ma, Dejun ; Shu, Siwan

CONTROL STRATEGY OF INDIRECT MATRIX CONVERTER-PERMANENT MAGNET SYNCHRONOUS GENERATOR SYSTEM .................................................................................................................. 500

Bian, Jinliang ; Zhou, Bo ; Lei, Jiaxing ; Qin, Xianhui

INVESTIGATION ON HYBRID RATIO BETWEEN PM AND CURRENT EXCITATION SOURCES FOR HIGH-SPEED SYNCHRONOUS GENERATOR ............................................................................. 505

Lin, Nan ; Wang, Dong ; Shen, Yang ; Wei, Kun

MATERIAL-SAVING OPTIMIZATION OF HIGH-POWER DIRECT-DRIVEN PERMANENT MAGNET WIND GENERATOR .................................................................................................................................... 509

Wei, Kun ; Wang, Dong ; Yu, Zhongjun ; Lin, Huangda

THE INFLUENCE OF ROTOR CONFIGURATIONS ON THE PERFORMANCE OF AN REGENERATIVE PERMANENT MAGNET RETARDER ........................................................................................ 514

Wu, Shihua ; Fan, Weiwei ; Cui, Shumei

MULTI-OBJECTIVE OPTIMIZATION DESIGN OF INTERIOR PERMANENT-MAGNET SYNCHRONOUS MOTORS FOR IMPROVING THE EFFECTIVENESS OF FIELD WEAKENING CONTROL .............................................................................................................................................. 517

Chui, Ming-Tsung ; Chiang, Jui-An ; Lee, Jui-Min ; Gaing, Zwe-Lee

FLUX-WEAKENING PERFORMANCE COMPARISON OF CONVENTIONAL AND E-CORE SWITCHED-FLUX PERMANENT MAGNET MACHINES ....................................................................................... 522

Afinowi, I.A.A. ; Zhu, Z.Q. ; Wu, D. ; Guan, Y. ; Mipo, J.C. ; Farah, P.

SIMULATION OF FLUX-WEAKENING CONTROL OF PMSM FOR ELECTRICAL VEHICLE ...................... 529Du, Xiangyu ; Hu, Jialei ; Li, Xuguang

A NEW SPEED CONTROL STRATEGY FOR INTERIOR PERMANENT MAGNET MOTOR AT FULL SPEED RANGE ..................................................................................................................................................... 533

Bin, Wangyu ; Xin, Sunjian

NONLINEAR SPEED CONTROL FOR PMSM USING MIXED H2/H8 STATE OUTPUT FEEDBACK CONTROL .................................................................................................................................................. 539

Wang, Shuai ; Zhao, Ke ; Wang, Weixin ; Sun, Li ; Li, Dan

ANTI-WINDUP SPEED REGULATOR BASED ON MODEL PREDICTIVE CONTROL ..................................... 544Wang, Shuang ; Zhu, Wenju ; Huang, Surong ; Hou, Fei

ADAPTIVE SLIDING MODE CONTROL FOR THE SPEED REGULATION OF PMSMS WITH LOAD CHANGE ............................................................................................................................................................... 549

Mu, Chaoxu ; Xu, Wei ; Sun, Changyin

AN IMPROVED CURRENT PREDICTIVE CONTROL ALGORITHM IN THE APPLICATION OF 22 KW VARIABLE SPEED PERMANENT MAGNET SYNCHRONOUS MOTOR.......................................... 556

Zhang, Hang ; Liu, WeiGuo

DEAD TIME INFLUENCE AND COMPENSATION OF DIRECT TORQUE CONTROL ..................................... 563Qiu, Xin ; Huang, Wenxin ; Bu, Feifei ; Cui, Weijia

DIRECT INSTANTANEOUS TORQUE CONTROL OF SWITCHED RELUCTANCE MOTOR BASED ON ADAPTIVE BACKSTEPPING ................................................................................................................... 567

Ruiwei, Zhang ; Yingchao, Zhang ; Xisen, Qian ; Ting, Lu ; Zhengming, Zhao

BACKSTEPPING DIRECT TORQUE CONTROL OF PERMANENT MAGNET SYNCHRONOUS MOTOR WITH RLS PARAMETER IDENTIFICATION ........................................................................................... 573

Xu, Yanping ; Lei, Yazhou ; Sha, Dengzhuo

RESEARCH ON DIRECT TORQUE CONTROL FOR PERMANENT MAGNET SYNCHRONOUS MOTOR DRIVES.............................................................................................................................................................. 579

Zhou, Xiaomin ; Wu, Chenlong ; Zhang, Shuo

IMPROVED MODEL-BASED PREDICTIVE TORQUE CONTROL ALGORITHM WITH MODIFIED MODULATION INDEX FOR DOUBLY SALIENT PERMANENT MAGNET SYNCHRONOUS MACHINES ....................................................................................................................................... 584

Chen, Fengxiang ; Xu, Wei ; Qu, Ronghai

RESEARCH ON SENSORLESS DTC OF PMSM BASED ON NON-SINGULAR TERMINAL-SLIDING-MODE OBSERVER ........................................................................................................................................ 591

Chen, Shuo ; Fan, Liping ; Lv, Mo ; Tsuji, Mineo

IMPROVED MODEL PREDICTIVE CONTROL OF PERMANENT MAGNET SYNCHRONOUS MOTOR ............................................................................................................................................................................. 598

Wu, Xuan ; Wang, Hui ; Huang, Shoudao ; Feng, Yaojing

THE ELECTROMAGNETIC PERFORMANCE CALCULATION AND COMPARISON OF FLUX REVERSAL MACHINE WITH DIFFERENT WINDING TOPOLOGIES ................................................................ 605

Yang, Yubo ; Zhang, Jingwei ; Ma, Lin ; Wang, Xiuhe ; Wang, Ning

A COMPLETE MODEL CHARACTERIZATION OF DUAL THREE-PHASE PERMANENT MAGNET BRUSHLESS MACHINE FOR ELECTROMECHANICAL SERVOACTUATION .............................. 610

Luo, Zhanqiang ; Liang, Deliang ; Liu, Xing ; Yang, Xintuan

DESIGN AND MODELING OF AXIAL FLUX PERMANENT MAGNET MACHINE WITH YOKELESS AND SEGMENT ARMATURE USING MAGNETIC EQUIVALENT CIRCUIT ............................... 618

Zhou, Tao ; Huang, Yunkai ; Dong, Jianning ; Guo, Baocheng ; Zhang, Li

SOFTWARE BASED INTERACTION OF MULTIPLE DOMAINS FOR THE DESIGN OF ELECTRICAL MACHINES ............................................................................................................................................ 624

Kammermann, Jorg ; Bertram, Christiane ; Flugel, Sonja ; Hecker, Quirin ; Meyer, Wolfgang ; Herzog, Hans-Georg

SIMULATION FOR OPERATING CONDITIONS TRANSITION OF ASYNCHRONOUS MACHINE IN BLOWER DRIVING SYSTEM OF CHEMICAL INDUSTRY FOR FLUE GAS RECOVERY ...................................................................................................................................................................... 630

Chen, Tianmin ; Wang, Xiuhe ; Yang, Yubo ; Zhang, Zongsheng

STUDY OF MULTIPHASE MODULAR STATOR SPM BASED ON PHASE VARIABLE MODEL .................... 634Peng, Xi ; Zhou, Libing ; Wang, Jin ; Kang, Huilin

OVERVOLTAGE MITIGATION OF SUBMERSIBLE MOTORS WITH LONG CABLES OF DIFFERENT LENGTHS .................................................................................................................................................. 638

Liu, Yue ; Wang, Liguo ; Gao, Han ; Zhang, Haicong ; Xu, Dianguo

STUDY ON IMPEDANCE CHARACTERISTIC OF AIRCRAFT CABLES ............................................................. 645Xie, Meng ; Wang, Hongxia ; Zhang, Xiaobin ; Gao, Zhaohui ; Li, Weilin

METHODICAL CONSIDERATIONS FOR SETTING UP SPACE-RESOLVED LUMPED-PARAMETER THERMAL MODELS FOR ELECTRICAL MACHINES ................................................................. 651

Qi, Fang ; Stippich, Alexander ; Guettler, Moritz ; Neubert, Markus ; De Doncker, Rik W.

DESIGN OF A NEW MAGNETIC-PLANETARY-GEARED OUTER-ROTOR PERMANENT-MAGNET BRUSHLESS MOTOR FOR ELECTRIC VEHICLES .............................................................................. 658

Zhang, Renzhong ; Zhu, Xiaoyong ; Chen, Long

DESIGN OF A PERMANENT MAGNET CONFIGURATION FOR NUCLEAR MAGNETIC RESONANCE LOGGING................................................................................................................................................ 664

Zhang, Yanli ; Geng, Xin ; Zhang, Dianhai ; Xie, Dexin

DESIGN AND ANALYSIS OF A DUAL-ROTOR RADIAL FLUX PERMANENT-MAGNET GENERATOR ................................................................................................................................................................... 669

Xu, Peifeng ; Liu, Xianxing ; Shi, Kai ; Xiao, Feng

DESIGN AND EVALUATION OF A NEW FLUX-INTENSIFYING PERMANENT MAGNET BRUSHLESS MOTOR ..................................................................................................................................................... 673

Yan, Bing ; Zhu, Xiaoyong ; Chen, Long

DESIGN OF MINING FLAMEPROOF VOLTAGE STABILIZING TRANSFORMER ADOPTING ADAPTIVE FUZZY PID CONTROLLER ..................................................................................................................... 678

Wang, Qingshan ; Liang, Deliang ; Du, Jinhua

THEORETICAL ANALYSIS AND SIMULATION STUDY OF RESONANT COUPLING AIR CORE POWER TRANSFORMERS ............................................................................................................................... 682

Li, Kang ; Zhang, Guoqiang ; Guo, Runrui ; Javed, Hassan

RESEARCH ON ECONOMIC REMAINING LIFE OF POWER TRANSFORMERS BASED ON THE LIFETIME DATA.................................................................................................................................................... 686

Zhao, Wanfang ; Wang, Huifang ; Lin, Dongyang

JOINT SIMULATION ANALYSIS OF BRUSHLESS DC MOTOR AND CONTROL SYSTEM ........................... 693Huang, Yuanfeng ; Wang, Haifeng ; Li, Wang

VOLUME 2

MODELING ANALYSIS OF SWITCHED RELUCTANCE MOTOR WITH ANFIS AND D-FNN........................ 697

Xu, Aide

OPTIMIZATION DESIGN OF HIGH EFFICIENCY VARIABLE FREQUENCY INDUCTION MOTOR BASED ON FINITE ELEMENT ANALYSIS ................................................................................................ 701

Cui, Gang ; Liu, Lifei ; Li, Shan ; Yang, Pingxi ; Yang, Fan ; Chen, Lin ; Dong, Jiwei

STATE OF ART OF SEQUENTIAL OPTIMIZATION STRATEGIES FOR THE DESIGN OF ELECTROMAGNETIC DEVICES ................................................................................................................................. 706

Lei, Gang ; Zhu, Jianguo ; Guo, Youguang ; Zou, Yang

IMPROVED SQUARE-WAVE VOLTAGE INJECTION METHOD FOR SENSORLESS CONTROL OF PMSM AND ITS ADAPTABILITY TO MOTOR PARAMETER VARIATIONS.......................... 710

Zhen, Guo ; Jianmin, Wang ; Xiaomin, Zhao

ANALYSIS AND IMPROVEMENT OF PULSATING CURRENT INJECTION BASED SENSORLESS CONTROL OF PERMANENT MAGNET SYNCHRONOUS MOTOR........................................... 716

Jianmin, Wang ; Xiaomin, Zhao ; Zhen, Guo

SENSORLESS CONTROL OF SRM BASED ON IMPROVED SIMPLIFIED FLUX-LINKAGE METHOD ........................................................................................................................................................................... 722

Zhang, Yunlong ; Liu, Chuang ; Zhang, Lei

ROTOR POSITION AND SPEED ESTIMATION OF INTERIOR PERMANENT MAGNET SYNCHRONOUS MOTOR USING UNSCENTED KALMAN FILTER .................................................................... 727

An, Lu ; Hameyer, Kay

A NOVEL STRATEGY OF INITIAL ROTOR POSITION DETECTION FOR SURFACE MOUNTED PERMANENT MAGNET SYNCHRONOUS MACHINES..................................................................... 733

Li, Jie ; Zhou, Bo ; Liu, Bing ; Wang, Long ; Ni, Tianheng

POSITION AND RADIAL DISPLACEMENT SENSORLESS CONTROL METHOD FOR BEARINGLESS SWITCHED RELUCTANCE MOTORS ........................................................................................... 738

Zhao, He ; Cao, Xin ; Deng, Zhiquan

DESIGN ON CONTROLLER OF CLAW POLE MOTOR WITH PM OUTER ROTOR ........................................ 744Zhang, Fengge ; Bian, Xueliang ; Liu, Guangwei ; Zhao, Xingang

SELF-SENSING ACTIVE MAGNETIC BEARING USING WAVELET BASED POSITION ESTIMATION ALGORITHM......................................................................................................................................... 748

Yu, Jie ; Zhu, Changsheng

OBSERVER BASED SENSORLESS PREDICTIVE HYSTERESIS CONTROL OF A TRANSVERSE FLUX MACHINE .................................................................................................................................. 752

Bauer, J. ; Kleimaier, A.

STUDY ON STATOR FLUX ORIENTED SENSORLESS INDUCTION MOTOR CONTROL SYSTEM............................................................................................................................................................................. 758

Mei, Baishan ; Feng, Jiangbo

LOW-SPEED DIRECT-DRIVEN SENSORLESS CONTROL INCLUDING ZERO-SPEED FOR SWITCHED RELUCTANCE MOTOR BASED ON DYNAMIC INDUCTANCE MODEL ..................................... 763

Zhang, Xulong ; Wang, Feng ; Wu, Xuanqin

RESEARCH ON INITIAL ROTOR POSITION ESTIMATION FOR SPMSM ........................................................ 768Liu, Bing ; Zhou, Bo ; Liu, Haidong ; Li, Jie ; Wang, Long ; Wang, Qinglong

RESEARCH OF DIRECT POWER CONTROL OF PWM RECTIFIER BASED ON VIRTUAL FLUX .................................................................................................................................................................................. 775

Yu, Guolong ; Wang, Yi ; Ma, Shang ; Zhang, Lirong

A NOVEL POSITION SENSORLESS CONTROL OF FLUX-SWITCHING PERMANENT MAGNET LINEAR MACHINE FOR ELECTROMAGNETIC LAUNCH ................................................................ 780

Meng, Gaojun ; Yu, Haitao ; Huang, Lei ; Mingfei, Xu

AN EFFICIENCY OPTIMIZATION STRATEGY OF PV/DC MODULAR INTEGRATED STRUCTURE UNDER POWER MISMATCH CONDITION...................................................................................... 786

Li, Pengfei ; Li, Yuling ; Wang, Guanjian ; Zhang, Dehua

SHORT-CIRCUIT CHARACTERISTICS AND IMPACT OF PV INVERTER ON THE PROTECTION OF DISTRIBUTION GRID .................................................................................................................. 791

Mingming, Shi ; Xiaodong, Yuan ; Yubo, Yuan ; Bing, Chen ; Zhenhua, Lv

AN IMPROVED PARTICLE SWARM OPTIMIZATION MPPT ALGORITHM BASED ON VOLTAGE WINDOW RESTRICTIONS ....................................................................................................................... 795

Qing, Zhu ; Xing, Zhang ; Chun, Liu ; Shou, Li Shan ; Xiaojing, Chen

BATTERY ENERGY STORAGE SYSTEM SMOOTH PHOTOVOLTAIC POWER FLUCTUATION CONTROL METHOD AND CAPACITY DEMAND ANALYSIS................................................. 800

Jin, Wentao ; Xie, Zhijia ; Li, Bei

LEAKAGE CURRENT REDUCTION FOR TRANSFORMERLESS THREE-LEVEL T-TYPE PHOTOVOLTAIC GRID-CONNECTED INVERTER ................................................................................................ 806

Shao, Zhangping ; Zhang, Xing ; Wang, Fusheng ; Cao, Renxian ; Ni, Hua

ANALYSIS ON CIRCULATING CURRENT IN PARALLEL CONNECTED PV-INVERTERS ........................... 810Zhou, Liang ; Wu, Zhenxing ; Wang, Guangsen

DESIGN AND IMPLEMENTATION OF THREE-PHASE TWO-BRIDGE ADVANCED NEUTRAL POINT CLAMPED THREE-LEVEL PHOTOVOLTAIC INVERTER ...................................................................... 816

Yuan, Liqiang ; Cao, Yang ; He, Fanbo ; Ma, Junchao ; Chen, Zhiping ; Lu, Ting ; Zhao, Zhengming

EVALUATION OF LOW-VOLTAGE RIDE-THROUGH CAPABILITY OF A TWO-STAGE GRID-CONNECTED THREE-LEVEL PHOTOVOLTAIC INVERTER............................................................................... 822

Wang, Yuewu ; Yang, Ping ; Yin, Xu ; Ma, Yiwei

MULTI-LEVEL PV INVERTER WITH PHOTOVOLTAIC GROUPS INDEPENDENT MPPT CONTROL ......................................................................................................................................................................... 829

Xie, Luyao ; Qi, Jun ; Weng, Guoqing ; Zhang, Youbing

NOVEL OUTPUT FILTER OF FLYBACK INVERTER FOR PHOTOVOLTAIC AC-MODULE ........................ 835Eom, Ju-Kyoung ; Noh, Yong-Su ; Choi, Bong-Yeon ; Lee, Soon-Ryung ; Won, Chung-Yuen

EMPIRICAL STUDY OF SYSTEM-LEVEL PV POWER PLANT POWER FACTOR ADJUSTMENT RELYING ON PV INVERTER ........................................................................................................... 840

Zhenhua, Lv ; Mingming, Shi ; Xiaodong, Yuan

A MULTI-MODE PHOTOVOLTAIC POWER GENERATION SYSTEM BASED ON DC BUS ........................... 843Wang, Guanjian ; Li, Pengfei ; Li, Yuling ; Wang, Xiaokun

ECONOMIC DISPATCH ALGORITHM CONSIDERING BATTERY DEGRADATION CHARACTERISTIC OF ENERGY STORAGE SYSTEM WITH PV SYSTEM ....................................................... 849

Eom, Ju-Kyoung ; Lee, Soon-Ryung ; Ha, Eun-Jung ; Choi, Bong-Yeon ; Won, Chung-Yuen

ADAPTIVE PARAMETER IDENTIFICATION METHOD AND STATE OF CHARGE ESTIMATION OF LITHIUM ION BATTERY ............................................................................................................. 855

Sun, Dong ; Chen, Xikun

SOH ESTIMATION OF LEAD ACID BATTERY BY ARTIFICIAL DETERIORATION ...................................... 861I-Kun, Tseng ; Inamori, Mamiko ; Morimoto, Masayuki

A NEW SOC ESTIMATION ALGORITHM WITHOUT INTEGRATED ERROR USING DCIR REPETITIVE CALCULATION ...................................................................................................................................... 865

Cho, Yong-Ki ; Jeong, Yong-Min ; Ahn, Jung-Hoon ; Ryu, Seung-Hee ; Lee, Byoung-Kuk

REVIEW OF EQUALIZING METHODS FOR BATTERY PACK............................................................................. 871Xiong, Hui ; Fu, Yatao ; Wei, Yiying

CALCULATION OF THE PERFORMANCE OF THE DUAL THREE-PHASE PERMANENT MAGNET BRUSHLESS MACHINE SYSTEM USING MATRIX TENSOR APPROACH...................................... 878

Luo, Zhanqiang ; Liang, Deliang ; Liu, Xing ; Yang, Xintuan

SYSTEM CONSTRUCTION METHOD OF PARALLEL OPERATION SYSTEM CONSTRUCTED WITH THREE ELECTRIC POWER CONVERTERS ................................................................................................. 887

Ishikura, Keisuke ; Inaba, Hiromi ; Kishine, Keiji ; Nakai, Mitsuki ; Ito, Takuma

EXAMINATION OF CROSS CURRENT SUPPRESSION METHOD USING CONTROL OF PARALLEL OPERATION SYSTEM CONSTRUCTED BY TWO ELECTRIC POWER CONVERTERS ................................................................................................................................................................. 892

Nakai, Mitsuki ; Inaba, Hiromi ; Kishine, Keiji ; Ishikura, Keisuke ; Ito, Takuma

RESEARCH A CONTROL STRATEGY FOR WIND POWER PMSG WITH FULL POWER CONVERTER.................................................................................................................................................................... 898

Keqing, Qu ; Xiaoxia, Liang ; Xuhui, Chen ; Tiankai, Ye ; Jinbin, Zhao

A SVPWM BASED ON FLUCTUATE CAPACITOR VOLTAGE IN 3L-NPC BACK-TO-BACK CONVERTER APPLIED TO WIND ENERGY............................................................................................................. 902

Chen, Quan ; Wang, Qunjing ; Chen, Zhe ; Li, Guoli ; Hu, Cungang

A MODULATION METHOD BASED ON FINITE STATE MACHINE OF FIVE-LEG INVERTER FOR DUAL MOTOR DRIVES ........................................................................................................................................ 909

Mei, Yang ; Yi, Zichen ; Wang, Lipeng

A SPECIFIC ANALYSIS MODEL OF THREE-LEVEL NPC INVERTER FED ADJUSTABLE SPEED DRIVE SYSTEM WITH HIGH ACCURACY ................................................................................................. 914

Huang, Zhen ; Sun, Kai ; Mei, Yang

RESEARCH ON THE STABILITY OF A WIDE INPUT AC-DC CONVERTER USED IN HIGH-SPEED LOW-VOLTAGE GENERATOR ...................................................................................................................... 920

Tai, Liuchen ; Lin, Mingyao ; Fu, Xinghe ; Zhang, Wei

UNIT POWER FACTOR CONTROL OF PMSM FED BY INDIRECT MATRIX CONVERTER ......................... 926Lei, Jiaxing ; Zhou, Bo ; Bian, Jinliang ; Jiangsu, Xianhui Qin

MODEL-BASED DESIGN FOR THE CONTROL MODULE OF CONVERTER FOR WIND TURBINE GENERATOR ................................................................................................................................................ 931

Cheng, Yunkai ; Guo, Hui

THE COORDINATED NEUTRAL POINT VOLTAGE BALANCE CONTROL FOR BACK-TO-BACK NPC CONVERTERS USED IN THE WIND POWER SYSTEM .................................................................... 935

Tan, Longcheng ; Liu, Yang ; Su, Zhaoyang ; Wang, Ping ; Li, Yaohua

A CURRENT CONTROL STRATEGY OF THREE-PHASE GRID-CONNECTED INVERTER WITH LCL FILTER BASED ON ONE-CYCLE CONTROL ...................................................................................... 939

Liu, Xiao-dong ; Wu, Jing ; Liu, Su-cheng ; Fang, Wei ; Liu, Yan-fei

AN ACTIVE DAMPING METHOD BASED ON PR CONTROL FOR LCL-FILTER-BASED GRID-CONNECTED INVERTERS............................................................................................................................................ 944

Shi, Yong ; Su, Jianhui

ANALYSIS IN DSC-PLL GRID SYNCHRONIZATION METHOD UNDER GRID FREQUENCY VARIATION ...................................................................................................................................................................... 949

Lee, Jaedo ; Cha, Hanju

A SINGLE-PHASE SPLL THAT COMBINED THE ADVANTAGES OF THE PLL AND THE FFT ALGORITHM ................................................................................................................................................................... 954

Li, WenFan ; Wang, Jian ; Hao, RuiXiang

NONLINEAR MODELING AND TEST OF INVERTER BASED ON FPGA............................................................ 958Huang, Surong ; Zhou, Qingdong ; Gao, Jin

DESIGN AND OPTIMIZATION OF HIGH FREQUENCY CURRENT TRANSFORMER .................................... 963Ye, Yanshen ; Liang, Deliang ; Du, Jinhua ; Tang, Ming ; Liu, Xiang

DESIGN AND ANALYSIS OF A FIVE-PHASE DOUBLE-STATOR PERMANENT MAGNET SYNCHRONOUS MOTOR.............................................................................................................................................. 967

Zhao, Jing ; Li, Jingqi ; Chen, Zhen

ANALYZE AND IMPROVE LIFETIME IN 3L-NPC INVERTER FROM POWER CYCLE AND THERMAL BALANCE .................................................................................................................................................... 974

Chen, Quan ; Chen, Zhe ; Wang, Qunjing ; Li, Guoli ; Cheng, Long

STATOR INTER-TURN FAULT DETECTION FOR THE CONVERTER-FED INDUCTION MOTOR BASED ON THE ADJACENT-CURRENT PHASE-SHIFT ........................................................................ 981

Liu, He ; Huang, Jin ; Cheng, Ming ; Hou, Zhaowen ; Zhao, Lihang

ROTOR FAULTS DIAGNOSIS IN ROTOR FIELD ORIENTED CONTROLLED INDUCTION MOTORS BASED ON TORQUE CURRENT................................................................................................................ 988

Hou, Zhaowen ; Huang, Jin ; Cheng, Ming ; Liu, He ; Zhao, Lihang

PREVENTIVE MAINTENANCE SCHEDULE OF CNC MACHINE TOOL BASED ON MONTE CARLO SIMULATION.................................................................................................................................................... 993

Qiu, Liqing

A NEW SOH PREDICTION MODEL FOR LITHIUM-ION BATTERY FOR ELECTRIC VEHICLES ........................................................................................................................................................................ 997

Han, Huachun ; Xu, Haiping ; Yuan, Zengquan ; Shen, Yanling

EXPERIMENTAL STUDY ON SF6 DECOMPOSITION CHARACTERISTICS UNDER SPARK DISCHARGES................................................................................................................................................................. 1003

Lin, Tao ; Han, Dong ; Zhang, Guoqiang

OPEN-CIRCUIT FAULT DIAGNOSIS OF SINGLE CONVERTER DEVICE FOR DIRECTLY-DRIVEN WIND POWER SYSTEM .............................................................................................................................. 1007

Huang, Keyuan ; Yang, Weixing ; Wang, Li ; Huang, Shoudao

COMPENSATION STRATEGY OF SHORT-CIRCUIT FAULT FOR A SINGLE-WINDING BEARINGLESS SWITCHED RELUCTANCE MOTOR ........................................................................................... 1013

Yang, Han ; Deng, Zhiquan ; Cao, Xin ; Zhang, Lei

SIX SIGMA MANAGEMENT FOR FAULT-TOLERANT OPERATION OF THE PMSM DRIVE .................... 1019Wei, Shurong ; Huang, Surong ; Gao, Jin

ON-SITE PARTIAL DISCHARGE TEST OF MEDIUM VOLTAGE SWITCHGEAR BY TIME OF ARRIVAL METHOD ..................................................................................................................................................... 1023

Luo, Ruibin ; Tang, Ming ; Liang, Deliang

FAULT-TOLERANT REPETITIVE CONTROL OF THREE-PHASE CVCF PWM INVERTERS ..................... 1029Yang, Yunhu

EVALUATING THE STATOR WINDING INTER-TERN SHORT CIRCUIT FAULT OF PERMANENT MAGNET MOTOR USING FEA COMBINED WITH EXPERIMENT ......................................... 1034

Qi, Zheng ; Liang, Yongchun

5-PHASE FLUX SWITCHING MACHINE INSULATION FAILURE DETECTION USING VIBRATION MONITORING ........................................................................................................................................ 1039

Ojeda, Javier ; Boisson, Julien ; Gabsi, Mohamed

RELIABILITY OF PARALLEL CONNECTED POWER TRANSFORMERS WITH FAILURE CORRELATION AND ITS PREVENTIVE MAINTENANCE .................................................................................. 1044

Yang, Bo

THE DESIGNING AND IMPLEMENTATION OF E2 INDUSTRIAL INVERTERS WORKING RELIABILITY TESTING SYSTEM............................................................................................................................. 1048

Man, Yongkui ; Bian, Chunyuan ; Sun, Tianhui ; Zhang, Xiuming

ANALYSIS OF POWER SYSTEM OPERATION RELIABILITY INCORPORATING HUMAN ERRORS .......................................................................................................................................................................... 1052

Bao, Yingkai ; Guo, Jia ; Tang, Junxi ; Li, Zhao ; Pang, Suhong ; Guo, Chuangxin

A MAXIMUM CURRENT SHARING METHOD FOR DUAL-REDUNDANCY BRUSHLESS DC MOTOR CONTROL....................................................................................................................................................... 1057

Yan, Hao ; Xu, Yongxiang ; Zou, Jibin ; Wang, Baochao ; Jiang, Shanlin

A NOVEL TWELVE-STEP SENSOR-LESS CONTROL FOR TORQUE RIPPLE REDUCTION IN BRUSHLESS DC MOTOR............................................................................................................................................. 1062

Kim, Sung-An ; Choi, Geo-Seung ; Lee, Sang-Geon ; Cho, Yun-Hyun

INFLUENCE OF SLEEVE ON ROTOR EDDY CURRENT LOSS IN 10KW PERMANENT MAGNET BLDC MOTORS........................................................................................................................................... 1069

Yan, Lei ; Luo, Ling ; Luo, Bing ; Wu, Xianyu

INTER-TURN FAULT TOLERANT CONTROL SYSTEM IN BRUSHLESS DC MOTOR BY USING YOKE WINDING .............................................................................................................................................. 1073

Lee, Seung-Tae ; Park, Jun-Kyu ; Hur, Jin

INVESTIGATION OF DISC-TYPE BRUSHLESS MOTOR WITH PM BEARING FOR LVADS ....................... 1078Su, Jingjing ; Li, Jipeng ; Jiang, Yang ; Wang, Wei ; Gao, Hang ; Han, Zhifu ; Zhang, Lei

CURRENT LIMIT STRATEGY FOR BLDC MOTOR DRIVE WITH MINIMIZED DC-LINK CAPACITOR ................................................................................................................................................................... 1082

Wei, Yanyu ; Xu, Yongxiang ; Zou, Jibin ; Li, Yong

THE CHAOS RESEARCH ON ANTI-CONTROL OF BLDCM OF ELECTRICAL VEHICLE BASED ON ADAPTIVE METHOD .............................................................................................................................. 1087

Liu, Lidong

VECTOR CONTROL STUDY OF AXIAL FIELD FLUX-SWITCHING PERMANENT MAGNET MACHINE ....................................................................................................................................................................... 1091

Zhao, Jilong ; Lin, Mingyao ; Jin, Long ; Zhang, Wei

INFLUENCE OF ROTOR DESIGN PARAMETERS ON STATIC CHARACTERISTICS OF A NOVEL HYBRID AXIAL FIELD FLUX-SWITCHING PERMANENT MAGNET MACHINE ........................... 1096

Xu, Da ; Lin, Mingyao ; Fu, Xinghe ; Hao, Li ; Zhang, Wei

COMPARISON OF ELECTROMAGNETIC PERFORMANCE ON E-CORE AXIAL FIELD FLUX-SWITCHING PERMANENT MAGNET MACHINES ............................................................................................... 1102

Zhang, Wei ; Lin, Mingyao ; Xu, Da ; Zhao, Jilong

A PARAMETRIC MAGNETIC NETWORK MODEL FOR AXIAL FLUX PERMANENT MAGNET MACHINE WITH CORELESS STATOR ................................................................................................. 1108

Wang, Youlong ; Chen, Wen Xuhui Chen ; Dong, Zhang

DESIGN OF VARIABLE AIR GAP AXIAL FLUX PERMANENT MAGNET MACHINE FOR EXTENDING THE SPEED REGION ........................................................................................................................... 1114

Shen, Qiping ; Xu, Qiwei

ANALYSIS OF LOSSES OF PERMANENT MAGNET SYNCHRONOUS MOTOR WITH PWM SUPPLY ........................................................................................................................................................................... 1119

Chen, Ping ; Tang, Renyuan ; Tong, Wenming ; Han, Xueyan ; Jia, Jianguo ; Zhu, Xiaofeng

ELECTROMAGNETIC CHARACTERISTICS ANALYSIS OF SURFACE-MOUNTED AND INTERIOR HYBRID PMSM BASED ON EQUIVALENT MAGNETIC CIRCUIT METHOD ............................ 1125

Si, Jikai ; He, Song ; Cao, Wenping ; Xu, Xiaozhuo ; Feng, Gaoming

AN APPROACH TO RESEARCH THE EFFECT OF TIME HARMONIC ON PERMANENT MAGNET SYNCHRONOUS MOTOR ......................................................................................................................... 1132

Guoxin, Zhao ; Xinzheng, Wang ; Zhifeng, Zhang ; Chengji, Cui

MAGNETIC AND VIBRATION ELEMENT ANALYSIS OF PM MOTOR UNDER FREQUENCIES INCLUDING MAGNETOSTRICTION ........................................................................................................................ 1136

Zhu, Lihua ; Yang, Qingxin ; Yan, Rongge ; Xian, Zhang

A SENSORLESS VECTOR CONTROL SYSTEM OF PERMANENT MAGNET SYNCHRONOUS MOTOR BASED ON LINE ACTIVE DISTURBANCE REJECTION CONTROLLER......................................... 1140

Zhang, Jinliang ; Kang, Longyun

RESEARCH ON LOSS OF AXIAL FIELD FLUX-SWITCHING PERMANENT MAGNET MACHINE ....................................................................................................................................................................... 1145

Ma, Yue ; Zhang, Wei ; Yang, Yi ; Bao, Huihui

RESEARCH ON STABLE REGIONS OF DOUBLE-CLOSED LOOP SYSTEM FOR PMSM WITH LOW-PASS FILTERS .................................................................................................................................................... 1150

Sun, Lu ; Wang, Xiaolin ; Deng, Zhiquan ; Ding, Qiang

ANALYSIS ON COUPLING EFFECT OF 2-DOF DIRECT DRIVE INDUCTION MOTOR BASED ON 3-D MODEL .............................................................................................................................................................. 1157

Si, Jikai ; Ai, Liwang ; Feng, Haichao ; Zhu, Yifeng ; Hu, Yihua

NOVEL BISTABLE PM ELECTROMAGNETIC CLUTCH UNIT FOR WHEEL EV DRIVE ............................ 1164Cai, Wanli ; Gu, Chenglin ; Wang, Chenhui

INVESTIGATION OF A FIVE-PHASE 20-SLOT/18-POLE PMSM FOR ELECTRIC VEHICLES .................... 1168Zheng, Ping ; Sui, Yi ; Fu, Zhenxing ; Tang, Peilun ; Wu, Fan ; Wang, Pengfei

MAGNETIC SYSTEM STUDY OF A HALBACH COMPOUND-STRUCTURE PMSM USED FOR HYBRID ELECTRIC VEHICLES ................................................................................................................................ 1173

Sui, Yi ; Liu, Yong ; Tong, Chengde ; Yu, Bin ; Cheng, Luming

TORQUE DENSITY IMPROVEMENT OF TRANSVERSE-FLUX DUAL ROTOR MACHINE FOR POWER-SPLIT HYBRID ELECTRIC VEHICLE APPLICATION ......................................................................... 1178

Zheng, Ping ; Zhao, Quanbin ; Bai, Jingang ; Yu, Bin ; Song, Zhiyi ; Shang, Jing

DESIGN AND IMPLEMENTATION OF AN ELECTROMAGNETIC CLUTCH SYSTEM FOR HUB MOTORS................................................................................................................................................................ 1183

Yu, Weiguang ; Gu, Chenglin

RESEARCH ON A FOUR-PHASE FAULT-TOLERANT PMSM USED FOR EVS ............................................... 1187Zhou, Haisong ; Yu, Bin ; Cheng, Luming ; Wang, Haipeng ; Li, Xiaopeng ; Zheng, Ping

NOVEL SWITCHED-FLUX HYBRID PERMANENT MAGNET MEMORY MACHINES FOR EV/HEV APPLICATIONS ............................................................................................................................................. 1191

Yang, Hui ; Lin, Heyun ; Zhu, Z.Q. ; Wang, Dong ; Fang, Shuhua ; Huang, Yunkai

A NOVEL WOUND ROTOR BDFIG FOR SHIP SHAFT GENERATOR APPLICATION —CONTROL AND PROTOTYPE TESTS ...................................................................................................................... 1196

Chen, Xin ; Wang, Xuefan

DIMENSION EFFECT ON A GRID-CONNECTED BRUSHLESS DOUBLY-FED RELUCTANCE GENERATOR ................................................................................................................................................................. 1201

Lin, I-Hsien ; Hsieh, Min-Fu ; Dorrell, David G. ; Tsai, Mi-Ching

DESIGN AND ELECTROMAGNETIC-THERMAL ANALYSIS OF A 64KW DOUBLY-SINE WOUND-ROTOR BRUSHLESS DOUBLY-FED GENERATOR.............................................................................. 1207

Kan, Chaohao ; Ma, Bo ; Chu, Guoliang ; Zhang, Jiawu

CONTROL STRATEGY FOR A FOUR-PHASE FAULT-TOLERANT PERMANENT-MAGNET SYNCHRONOUS MACHINE........................................................................................................................................ 1213

Zhou, Haisong ; Yu, Bin ; Lin, Zhanxi ; Wang, Haipeng ; Li, Xiaopeng ; Zheng, Ping

RESEARCH OF TORQUE BALANCE CONTROL OF DUAL-ROTOR MOTOR BASED ON MATLAB.......................................................................................................................................................................... 1219

Huang, Yuanfeng ; Wang, Haifeng ; Li, Wang

SCHEME OPTIMIZATION OF AN AXIAL MAGNETIC-FIELD-MODULATED BRUSHLESS DOUBLE-ROTOR MACHINE ...................................................................................................................................... 1222

Tong, Chengde ; Song, Zhiyi ; Zheng, Ping ; Bai, Jingang ; Zhao, Quanbin

FAULT TOLERANT CONTROL OF DUAL-ROTOR PMSM UNDER OPEN-CIRCUIT FAULT CONDITIONS ................................................................................................................................................................. 1227

Li, Yumeng ; Zhao, Jing ; Chen, Zhen ; Liu, Xiangdong ; Chen, Hao

DESIGN A WOUND ROTOR BRUSHLESS DOUBLY-FED GENERATOR BASED ON TOOTH HARMONIC PRINCIPLES AND FINITE ELEMENT ANALYSIS ......................................................................... 1233

Jia, Lei ; Wang, Xuefan

RESEARCH OF HYSTERESIS LOSS IN LARGE DRY SUBMERSIBLE MOTOR WITH THE FAULT OF STATIC ECCENTRICITY........................................................................................................................ 1240

Liang, Na ; Cheng, Xiaowei ; Fang, Yong ; Li, Fuying ; Lv, Qiang ; Bao, Xiaohua

MODIFIED INVERSE DECOUPLING CONTROL FOR BEARINGLESS SWITCHED RELUCTANCE MOTORS OPERATING IN IRREVERSIBLE DOMAIN.............................................................. 1245

Zhu, Zhiying ; Sun, Yukun

NUMERICAL CALCULATION AND ANALYSIS OF 3D TRANSIENT TEMPERATURE FIELD FOR TRANSVERSE FLUX TUBULAR LINEAR MACHINE .................................................................................. 1251

Mei, Zhao ; Shangqin, Song ; Fujun, Han ; Huixia, Liu ; Hongyong, Yang ; Ji-bin, Zou

ANALYTICAL PREDICTION AND VERIFICATIONS FOR INDUCTANCE PROFILE OF TUBULAR TRANSVERSE FLUX MACHINES WITH GENERIC STEEL LAMINATION................................. 1258

Qian, Wang ; Bo, Zhao ; Jianhui, Hu ; Yong, Li ; Jibin, Zou ; Tongmao, Niu ; Hui, Zhao

ANALYSIS AND OPTIMIZATION OF THE INNER ARMATURE TUBULAR FLUX-SWITCHING PERMANENT MAGNET LINEAR MOTOR .............................................................................................................. 1263

Tan, Qiang ; Huang, Xuzhen ; Zhou, Bo ; Wang, Qinglong

CALCULATION AND ANALYSIS OF THE LOSS FOR TUBULAR FLUX-SWITCHING PERMANENT MAGNET LINEAR MOTOR (TFSPMLM)....................................................................................... 1268

Huang, Xuzhen ; Tan, Qiang ; Xue, XiaoJing

REDUCTION OF DETENT FORCE IN PERMANENT MAGNET LINEAR SYNCHRONOUS MOTOR WITH DOUBLE SECONDARY SIDE ......................................................................................................... 1274

Zhao, Jiwen ; Liu, Kai ; Chen, Panpan ; Huang, Jian

DESIGN OPTIMIZATION OF PERMANENT MAGNET SYNCHRONOUS LINEAR MOTOR BY MULTI-SVM ................................................................................................................................................................... 1279

Zhao, Jiwen ; Huang, Jian ; Wang, Ya-hua ; Liu, Kai

TOPOLOGY ANALYSIS AND PERFORMANCE EVALUATION OF A HIGH THRUST FORCE DENSITY LINEAR SWITCHED RELUCTANCE MACHINE FOR LOW COST CONVEYOR APPLICATIONS ............................................................................................................................................................. 1283

Wang, Daohan ; Wang, Xiuhe ; Zhang, Chenghui

LINEAR SYNCHRONOUS MOTOR DRIVE SYSTEM BASED ON PROPORTION RESONANT CURRENT CONTROLLER IN MAGLEV TRANSPORTATION ............................................................................ 1289

Cui, Dongdong ; Wei, Rong ; Liu, Jinxin ; Ge, Qiongxuan

CONTROL STRATEGY FOR NINE PHASE MAGLEV PERMANENT MAGNET SYNCHRONOUS PLANAR MOTORS DRIVEN BY COMPOSITE CURRENT.................................................... 1293

Kou, Baoquan ; Xing, Feng ; Zhang, Chaoning ; Zhang, Lu ; Wang, Tiecheng

DYNAMIC ANALYSIS OF THE SINGLE-SIDED LINEAR INDUCTION MOTOR WITH DISCONTINUOUS SECONDARY................................................................................................................................ 1297

Ding, Hao ; Guo, Liang

ANALYSIS AND DESIGN OF A MAGNETICALLY LEVITATED PLANAR MOTOR WITH MULTI-LAYER OVERLAPPING WINDINGS .......................................................................................................... 1302

Guo, Liang ; Ding, Hao

PERFORMANCE COMPARISON OF CONTROL METHODS FOR HIGH SPEED LONG PRIMARY DOUBLE-SIDED LINEAR INDUCTION MOTOR ................................................................................ 1308

Liu, Qin ; Zhang, Ruihua ; Du, Yumei ; Shi, Liming ; Li, Yaohua

FAULT-TOLERANT PRIMARY-PERMANENT MAGNET LINEAR MACHINE EMPLOYING MODULAR SECONDARY ............................................................................................................................................ 1313

Zhao, Wenxiang ; Fang, Zhuoya ; Ji, Jinghua ; Zhou, Huawei ; Du, Yi ; Liu, Guohai

LEVITATION FORCE CONTROL OF MAGLEV PERMANENT SYNCHRONOUS PLANAR MOTOR BASED ON MULTIVARIABLE FEEDBACK LINEARIZATION METHOD ........................................ 1318

Xing, Feng ; Kou, Baoquan ; Zhang, Chaoning ; Zhou, Yiheng ; Zhang, Lu

SLOT-POLE COMBINATIONS RESEARCH OF PERMANENT-MAGNET LINEAR SYNCHRONOUS MOTOR WITH CONCENTRATED WINDINGS ....................................................................... 1322

Zhang, Xu ; Wang, Xudong ; Xu, Xiaozhuo ; Feng, Haichao

CURRENT CONTROL FOR THE SINGLE DEGREE OF FREEDOM LINEAR MAGLEV SYSTEM........................................................................................................................................................................... 1326

Li, Liyi ; Wang, Mingyi ; Cao, Jiwei ; Liu, Jiaxi

RESEARCH ON SMALL-SIGNAL STABILITY OF POWER SYSTEM CONNECTED WITH DIFFERENT WIND TURBINES BASED ON PSAT................................................................................................... 1330

Liu, Bangqiang ; Guo, Hui ; Gu, Guobiao

POWER FLUCTUATION ALLEVIATION USING CASCADE STATCOMS WITH ENERGY STORAGES FOR WIND FARM APPLICATIONS .................................................................................................... 1334

Ning-ning, Li ; Yi-qi, Liu ; Yan-chao, Ji ; Jian-ze, Wang ; Ke, Shen

ELECTROMAGNETIC TRANSIENT RESPONSE ANALYSIS OF DFIG UNDER CASCADING GRID FAULTS CONSIDERING PHASE ANGEL JUMPS ....................................................................................... 1340

Wang, Yun ; Wu, Qiuwei

BASIC INVESTIGATIONS ON A WIND POWER PLANT CONSISTING OF SERIES-CONNECTED WIND TURBINE GENERATORS ...................................................................................................... 1345

Tatsuta, Fujio ; Nishikata, Shoji

EXPERIMENTAL INVESTIGATIONS OF A HYBRID WIND POWER PLANT CONSISTING OF SERIES-CONNECTED WIND TURBINE GENERATORS WHEN INTERCONNECTED TO THE GRID................................................................................................................................................................................. 1350

Watanabe, N. ; Tatsuta, F. ; Nishikata, S.

STUDIES ON A HYBRID WIND TURBINE GENERATOR SYSTEM CONSIDERING SURPLUS POWER ............................................................................................................................................................................ 1354

Miyamoto, Takahiro ; Yamashita, Ken-ichiro ; Suzuki, Katsumi ; Tatsuta, Fujio ; Nishikata, Shoji

RESEARCH ON GRID-CONNECTED AND ECONOMY OF DISTRIBUTED WIND POWER GENERATION ................................................................................................................................................................ 1358

Xinyuan, Liu ; Pai, Liu ; Hui, Xu ; Huiping, Zheng ; Shuyong, Song ; Yezhou, Hu ; Yong, Yang

MAXIMUM POWER POINT TRACKING CONTROL OF BRUSHLESS DOUBLY-FED WIND POWER GENERATOR WITH OPEN WINDING FED BY DUAL TWO-LEVEL INVERTERS ......................... 1362

Zhu, Liancheng ; Zhang, Fengge ; Jin, Shi ; Wang, Dairui

COORDINATED CONTROL OF VSC-BASED DC NETWORK FOR WIND FARM INTEGRATION .............................................................................................................................................................. 1368

Lyu, Jinli ; Wang, Yi ; Ma, Shang ; Zhang, Lirong

REACTIVE POWER DISPATCH FOR LOSS MINIMIZATION OF A DOUBLY FED INDUCTION GENERATOR BASED WIND FARM .......................................................................................................................... 1373

Zhang, Baohua ; Hu, Weihao ; Hou, Peng ; Chen, Zhe

FREQUENCY RESPONSE CONTROL OF D-PMSG BASED ON THE ACTIVE DISTURBANCE REJECTION CONTROLLER....................................................................................................................................... 1379

Shi, Qiaoming ; Wang, Gang ; Chen, Yuhang ; Fu, Lijun ; Jiang, Wentao ; Huang, He

HARMONIC REDUCTION THROUGH RESISTIVE AND INDUCTIVE HARMONIC IMPEDANCE .................................................................................................................................................................. 1385

Li, Fei ; Zhang, Xing ; Zhu, Hong ; Li, Haoyuan ; Wang, Baoji ; Yu, Changzhou

DECOUPLED DIRECT POWER CONTROL BASED ON IMPROVED SECTOR SELECTION ALGORITHM FOR THREE-LEVEL GRID-CONNECTED INVERTER ............................................................... 1389

Lu, Ting ; Zhao, Zhengming ; Zhang, Yingchao ; Yuan, Liqiang ; He, Fanbo

TORQUE RIPPLE SUPPRESSION OF DFIG UNDER UNBALANCED GRID VOLTAGE CONDITIONS USING REDUCED-ORDER GENERALIZED INTEGRATORS.................................................... 1394

Wang, Jianliang ; Zhang, Yihuang ; Cheng, Peng ; Nian, Heng

AN IMPROVED LVRT CONTROL METHOD OF MW LEVEL DFIG-BASED WECS ....................................... 1400Su, Zhaoyang ; Wang, Ping ; Tan, Longcheng ; Song, Pengxian

INVESTIGATION OF HARMONIC CURRENT OF POWER SYSTEM USING STATIC VAR COMPENSATOR FOR GRID-CONNECTED INDUCTION GENERATORS UNDER CONDITION OF LOW WIND SPEED ................................................................................................................................................. 1406

Sawetsakulanond, B. ; Kinnares, V.

PERFORMANCE ANALYSIS AND COMPARISON FOR THE FIVE-PHASE INVERTER SVPWMS.......................................................................................................................................................................... 1410

Yu, Fei ; Xiang, Dong ; He, Huiying

THE SUBSECTION SYNCHRONOUS MODULATION STRATEGY FOR HIGH POWER NPC/H-BRIDGE INVERTER ..................................................................................................................................................... 1416

Pei, Yang ; Chongjian, Li ; Zhiming, Lan

EXPERIMENTAL VERIFICATION OF DEAD-TIME COMPENSATION SCHEME FOR PULSE WIDTH MODULATION SCHEME ON SIX-SWITCH TWO THREE-PHASE OUTPUT INVERTER ...................................................................................................................................................................... 1420

Ikegami, Sho ; Hoshi, Nobukazu ; Haruna, Junnosuke

CURRENT HARMONIC MINIMUM PULSE-WIDTH MODULATION FOR ANPC-5L INVERTER ............... 1425Song, Wenxiang ; Feng, Jiuyi ; Jiang, Shuhao ; Wang, Haoyu

INVESTIGATION ON A NOVEL DISCONTINUOUS PULSE-WIDTH MODULATION ALGORITHM FOR SINGLE-PHASE VOLTAGE SOURCE RECTIFIER............................................................. 1430

Qu, Hao ; Yang, Xijun ; Guo, Yougui ; Blaabjerg, Frede

VOLUME 3

AN IMPROVED CAPACITOR VOLTAGE BALANCE CONTROL FOR CASCADED H-BRIDGE RECTIFIER ..................................................................................................................................................................... 1437

Hong, Xiang ; Zhang, Ruihua ; Wu, Lin

VIRTUAL FLUX BASED DIRECT POWER CONTROL FOR THREE-LEVEL PWM RECTIFIER................. 1441Yingchao, Zhang ; Liping, Jin ; Yongchang, Zhang ; Ting, Lu ; Zhengming, Zhao

RESEARCH ON THE CONTROL TECHNIQUE OF HIGH POWER THREE-LEVEL PWM RECTIFIER WITH IGCTS ........................................................................................................................................... 1447

Jun, Jiang ; Chongjian, Li ; Chengsheng, Wang ; Wei, Duan ; Pei, Yang

A NOVEL DEAD TIME COMPENSATION METHOD OF SINGLE-PHASE PWM RECTIFIER ...................... 1453Zhao, Lu ; Ge, Qiongxuan ; Ren, Jinqi ; Li, Yaohua

A SIMPLIFIED 3D-SVPWM ALGORITHM FOR THREE-PHASE FOUR-WIRE SHUNT ACTIVE POWER FILTER ............................................................................................................................................................ 1457

Liu, Xiang ; Xie, Yunxiang ; Wang, Yu

VOLTAGE BALANCING STRATEGY BASED ON REFERENCE VECTOR ANGLE PREDICTION FOR THREE-LEVEL SHUNT APF.................................................................................................... 1463

Zhu, Jie ; Yang, Jiaqiang

AN ENHANCED METHOD BASED ON WAVELET FOR POWER QUALITY COMPRESSION ..................... 1468Gao, Jie ; Zheng, Changbao ; Hu, Cungang ; Ma, Xinchen

A STUDY ON REALIZATION OF HYSTERESIS CURRENT REGULATOR FOR REDUCING SWITCHING LOSS USING THE SLOPE OF REFERENCE CURRENT ............................................................... 1472

Hong, Sun-Ki ; Lee, Jung-Sup ; Byeon, Nam-Hee ; Kim, Ki-Seok

THE CALCULATION OF RADIAL FORCE WAVE WEAKENED PERCENTAGE FOR DOUBLY SALIENT MOTOR BASED ON IMPROVED MAGNETIC FIELD DIVISION METHOD................................... 1476

Zhang, Xin ; Wang, Xiuhe ; Yang, Yubo

A NEW BROADBAND BIPOLAR ELECTRICAL CONTROLLED ATTENUATOR ........................................... 1480Tang, Jian ; Zhao, Zhihua ; Xiao, Huan ; Li, Yi ; He, Fangmin ; Meng, Jin

ELECTRIC FIELD RESEARCH OF ±800KV DRY-TYPE SMOOTHING REACTOR ........................................ 1484Chen, Tuteng ; Cao, Jifeng ; Zhou, Guangyuan ; Zhipeng, Jiang ; Wang, Yu ; Wen, Xishan

IDENTIFICATION OF LAMINATED CORE AND WINDING'S PHYSICAL PARAMETERS BY STATOR'S MODAL TESTINGS .................................................................................................................................. 1488

Sun, Jingjing ; Feng, Haijun ; Zhu, Changsheng

RESEARCH ON THE VIBRATION AND NOISE OF LESS RARE-EARTH INTERIOR U PERMANENT MAGNET SYNCHRONOUS MACHINE .......................................................................................... 1493

Fu, Zhenxing ; Zhang, Peng ; Huang, Shaorui ; Zhao, Quanbin ; Zheng, Ping

INTERIOR PERMANENT MAGNET MOTOR DRIVE SYSTEM MODELING FOR ELECTROMAGNETIC INTERFERENCE ANALYSIS ............................................................................................ 1498

Zhang, Dong ; Kong, Liang ; Wen, Xuhui ; Duan, Zhuolin

AN INDUCTANCE TESTING METHOD FOR MULTI-UNIT PMSM WITHOUT ANY AUXILIARY EQUIPMENT........................................................................................................................................... 1505

Zou, Jibin ; Zeng, Depeng ; Xu, Yongxiang ; Zhao, Bo

A TORQUE MEASURING METHOD BASED ON ENCODER FOR PERMANENT MAGNET SYNCHRONOUS MACHINE........................................................................................................................................ 1510

Liu, Xing ; Liang, Deliang ; Du, Jinhua ; Yu, Yanan ; Yang, Xinning

DEVELOPMENT OF HIGH SPEED CHARACTERISTIC MEASUREMENT METHOD FOR PERMANENT MAGNET MOTORS ............................................................................................................................ 1515

Lin, Shao-Kai ; Tsai, Mi-Ching ; Wang, Sheng-He

INDIRECT TESTING TO DETERMINE LOSSES OF HIGH SPEED SYNCHRONOUS PERMANENT MAGNETS MOTORS .......................................................................................................................... 1520

Lateb, Ramdane ; Da Silva, Joaquim

DESIGN AND PACKAGING OF 1200V/300A-IGBT POWER MODULE FOR ELECTRIC VEHICLE......................................................................................................................................................................... 1527

Zheng, Libing ; Zhong, Yulin ; Wang, Chunlei ; Fang, Huachao ; Zhang, Jin ; Xu, Ju

MODELING AND DESIGN OF TESTING PLATFORM FOR PERMANENT MAGNET LINEAR SYNCHRONOUS MOTOR............................................................................................................................................ 1535

Kou, Baoquan ; Zhang, Lu ; Zhang, Yi ; Jin, Yinxi

A NEW INDUCTANCE MEASUREMENT METHOD FOR PERMANENT MAGNET SYNCHRONOUS LINEAR MOTOR ........................................................................................................................... 1539

Zhang, He ; Kou, Baoquan ; Wang, Liqiang ; Jin, Yinxi ; Zhang, Hailin

EFFECTS ANALYSIS OF MISALIGNMENTS ON DYNAMIC CHARACTERISTICS TEST FOR PERMANENT MAGNET SYNCHRONOUS MOTOR............................................................................................... 1543

Liu, Xing ; Liang, Deliang ; Du, Jinhua ; Yu, Yanan ; Yang, Xinning ; Luo, Zhanqiang

NUMERICAL ESTIMATION AND OPTIMIZATION OF VIBRATION NOISE DUE TO MAGNETOSTRICTION AND MAGNETIC FORCES FOR LAMINATED CORE STRUCTURE...................... 1548

Xian, Zhang ; Pengcheng, Zhang ; Qingxin, Yang ; Lihua, Zhu ; Xin, Zhang

ELECTROMAGNETIC NOISE ASSESSMENT FOR EV'S PM DRIVING MACHINES...................................... 1552Li, Xiaohua ; Huang, Surong ; Zhang, Qi ; Dai, Ying

IMPROVEMENT OF POLE-SPLITTING PERMANENT-MAGNET VERNIER MACHINE WITH PERMANENT MAGNETS ON BOTH STATOR AND ROTOR SIDES................................................................... 1556

Sun, Le ; Cheng, Ming

REMEDIAL OPERATION OF FIVE-PHASE TUBULAR FAULT-TOLERANT LINEAR PM ACTUATOR FOR ACTIVE ELECTROMAGNETIC SUSPENSION ...................................................................... 1562

Zhou, Huawei ; Chen, Long ; Liu, Guohai ; Xie, Ying ; Zhao, Wanxiang

INFLUENCE OF FLUX GAPS ON THE PERFORMANCE OF MODULAR PM LINEAR SYNCHRONOUS MOTORS.......................................................................................................................................... 1566

Shi, Jiameng ; Kong, Hao ; Huang, Liren ; Lu, Qinfen ; Ye, Yunyue

INVESTIGATION OF MULTIPHASE MODULAR STATOR SPM WITH FAULT TOLERANCE.................... 1572Kang, Huilin ; Zhou, Libing ; Wang, Jin ; Peng, Xi

ANALYSIS OF ELECTROMAGNETIC COUPLING IN DOUBLE-ROTOR PERMANENT MAGNET RELUCTANCE MOTOR ............................................................................................................................ 1576

Liu, Shaokun ; Du, Jinhua ; Liang, Deliang

ROTOR DESIGN TECHNIQUES FOR REDUCING THE COGGING TORQUE IN A NOVEL DUAL-ROTOR AXIAL FIELD FLUX-SWITCHING PERMANENT MAGNET MACHINE............................... 1581

Hao, Li ; Lin, Mingyao ; Xu, Da ; Zhang, Wei ; Li, Nian

MODELING OF DOUBLE-ROTOR PERMANENT MAGNET RELUCTANCE MOTOR .................................. 1587Liu, Shaokun ; Du, Jinhua ; Liang, Deliang

DESIGN AND SIMULATION OF DUAL ROTOR PERMANENT MAGNET BRUSHLESS DC MOTOR ........................................................................................................................................................................... 1591

Song, Shuangyi ; Xu, Yanliang ; Tian, Hongfang ; Gong, Xiao

FOUR-DIMENSION CURRENT VECTOR CONTROL FOR DUAL THREE-PHASE PMSM ............................ 1596Changpan, Zhou ; Jianyong, Su ; Guijie, Yang ; Nianwei, Xing

24-SECTOR SPACE VECTOR DECOMPOSITION FOR A DUAL THREE-PHASE PMSM .............................. 1601Yu, Yanjun ; Gao, Lixiao ; Liu, Yang ; Chai, Feng

CURRENT CONTROL STRATEGY FOR SIX-PHASE PMSM BASED ON MPC UNDER OPEN-CIRCUIT FAULT CONDITION ................................................................................................................................... 1607

Su, Jianyong ; Liu, Jian ; Yang, Guijie

CURRENT CONTROL METHOD OF SIX-PHASE PMSM DRIVE SYSTEM WITH PARALLEL BACK-TO-BACK CONVERTERS ............................................................................................................................... 1612

Chen, Ming-liang ; Wu, Yu-han ; Yuan, Lei ; Xiao, Fei ; Xie, Zhen

SENSORLESS SWITCHING-TABLE-BASED DIRECT TORQUE CONTROL FOR DUAL THREE-PHASE PMSM DRIVES.................................................................................................................................. 1616

Almarhoon, Ali H. ; Ren, Y. ; Zhu, Z.Q.

A NOVEL SPACE VECTOR MODULATION STRATEGY FOR A FIVE-PHASE FLUX-SWITCHING PERMANENT MAGNET MOTOR DRIVE SYSTEM....................................................................... 1622

Tong, Minghao ; Hua, Wei ; Cheng, Ming

ANALYSIS AND DESIGN OF A FAULT-TOLERANT SIX-PHASE PERMANENT-MAGNET SYNCHRONOUS MACHINE FOR ELECTRIC VEHICLES ................................................................................... 1629

Tong, Chengde ; Wu, Fan ; Zheng, Ping ; Sui, Yi ; Cheng, Luming

ON FAULT TOLERANCE FOR IPM-FSCW MACHINES ADOPTING A MODULAR CONVERTER.................................................................................................................................................................. 1633

Zhang, Hui ; Wallmark, Oskar ; Leksell, Mats

DESIGN AND ANALYTICAL INDUCTANCE CALCULATIONS OF FIVE-PHASE FAULT-TOLERANT PERMANENT-MAGNET MACHINE................................................................................................... 1639

Wang, Pengfei ; Zheng, Ping ; Sui, Yi ; Wu, Fan ; Cheng, Luming ; Li, Tiecai

DESIGN AND TEST OF TORQUE ADJUSTMENT SYSTEM OF FIVE-PHASE FAULT-TOLERANT PERMANENT-MAGNET MACHINE................................................................................................... 1643

Zheng, Ping ; Wang, Pengfei ; Fu, Zhenxing ; Sui, Yi ; Wang, Weinan ; Li, Tiecai

DESIGN OF NOVEL DISC TRANSVERSE FLUX PERMANENT MAGNET MACHINE ................................... 1648Gong, Xiao ; Xu, Yanliang ; Song, Wenxin

A NEW CALCULATION METHOD FOR ELECTROMAGNETIC TORQUE OF STEPPING MOTORS —TEETH LAYER CALCULATED TORQUE METHOD ...................................................................... 1652

Lu, Binglin ; Xu, Yanliang ; Xin, Feng ; Xiao, Gong

NUMERICAL INVESTIGATION OF HEAT TRANSFER FOR HIGH-SPEED PERMANENT-MAGNET MACHINE WITH SPIRAL-DUCT ROTOR ............................................................................................. 1657

Ma, Zhenjie ; Wang, Tianyu ; Wang, Dapeng ; Du, Guanghui ; Han, Ying ; Wang, Lin

DESIGN OF FUZZY CONTROLLER WITH LINEAR EXTENDED STATE OBSERVER FOR MAGNETIC SUSPENSION BEARINGS ..................................................................................................................... 1661

Li, Kexiang ; Deng, Zhiquan ; Liu, Chengzi ; Zhou, Jie

MAGNETIC FIELD ANALYSIS AND OPTIMAL DESIGN OF A NOVEL BISTABLE PERMANENT ELECTROMAGNETIC CLUTCH ..................................................................................................... 1667

Yang, Fan ; Gu, Chenglin ; Wang, Chenhui

CONCEPTUAL DESIGN OF SELF-SENSING ACTUATOR BASED ON GIANT MAGNETOSTRICTIVE MATERIAL.......................................................................................................................... 1671

Yan, Baiping ; Zhang, Chengming ; Li, Lili ; Lv, Fuzai ; Deng, Shuang

VIBRATION CONTROL STRATEGY FOR BEARINGLESS SWITCHED RELUCTANCE MOTORS ......................................................................................................................................................................... 1675

Liu, Chengwei ; Yang, Yan ; Deng, Zhiquan

POLE-SHAPE OPTIMIZATION OF FLUX-SWITCHING PERMANENT MAGNET MACHINE ..................... 1681Zhu, Dehong ; Shen, Chenpu ; Du, Yi ; Xiao, Feng

A DESIGN APPROACH INTEGRATING THE MAGNETIC CIRCUIT AND ELECTRIC CIRCUIT MODELS FOR BDFIM .................................................................................................................................................. 1685

Chang, Yao-Hsin ; Li, Yi-Ting ; Lin, I-Hsien ; Hsieh, Min-Fu

RESEARCH ON THE ELECTROMAGNETIC PERFORMANCE OF LESS RARE-EARTH INTERIOR V PERMANENT-MAGNET SYNCHRONOUS MACHINE ................................................................. 1691

Bai, Jingang ; Fu, Zhenxing ; Huang, Shaorui ; Song, Zhiyi ; Wang, Weinan ; Zheng, Ping

RESEARCH ON VARIABLE FLUX PERMANENT MAGNET POLE-CHANGING MACHINE WITH HARMONIC EXCITATION ............................................................................................................................. 1696

Wang, Dong ; Lin, Heyun ; Yang, Hui ; Fang, Shuhua ; Huang, Yunkai

DESIGN AND ANALYSIS OF MODIFIED SPOKE TYPE BLDC MOTOR USING A FERRITE PERMANENT-MAGNET .............................................................................................................................................. 1701

Seo, Il-Man ; Kim, Hyung-Kyu ; Hur, Jin

ANALYSIS AND RESEARCH OF A NOVEL AXIAL FIELD VARIABLE FLUX PERMANENT MAGNET SYNCHRONOUS MACHINE WITH MECHANICAL DEVICE............................................................ 1706

Liu, Xiping ; Chen, Dong ; Zhang, Chao ; Huang, Yuefei ; Wang, Min

MODELING AND ANALYSIS OF A MAGLEV VIBRATION ISOLATION UNIT USING RECTANGLE HALBACH PERMANENT MAGNET ARRAY ................................................................................ 1711

Zhou, Yiheng ; Kou, Baoquan ; Wang, Liqiang ; Xing, Feng

DESIGN OF BUILDING AIR-CONDITIONER CONTROL SYSTEM BASED ON PROFIBUS .......................... 1715Kun, Xia ; Linling, Zhu ; Sen, Miao ; Xinyue, Xu

CHARACTERISTIC ANALYSIS OF A NOVEL SERIES MAGNETIC PATH HYBRID EXCITATION LINEAR EDDY CURRENT BRAKE ................................................................................................. 1719

Kou, Baoquan ; Jin, Yinxi ; Zhang, He ; Zhang, Lu ; Zhang, Hailin

RESEARCH OF FUZZY TWO DEGREE OF FREEDOM PID CONTROL FOR PERMANENT MAGNET SYNCHRONOUS LINEAR MOTOR......................................................................................................... 1723

Zhao, Jiwen ; Huang, Jian ; Xu, Yanwu ; Pan, Zhenbao

CHARACTERISTICS ANALYSIS OF PERMANENT MAGNET FLUX SWITCHING LINEAR MACHINES ..................................................................................................................................................................... 1728

Wang, Xudong ; Bian, Fangfang ; Xu, Xiaozhuo ; Feng, Haichao

THRUST CHARACTERISTIC ANALYSIS AND TEST OF THE SYNCHRONOUS PERMANENT MAGNET LINEAR MOTOR ........................................................................................................................................ 1733

Zhang, Lu ; Kou, Baoquan ; Zhang, Yi ; Jin, Yinxi

DESIGN AND OPTIMIZATION OF A SINGLE-PHASE OSCILLATING PM ALTERNATOR USED FOR FREE-PISTON STIRLING ENGINES .................................................................................................... 1738

Bai, Jingang ; Fu, Zhenxing ; Yu, Bin ; Sui, Yi ; Zhu, Shaohong ; Zheng, Ping

REDUCING DETENT FORCE AND THREE-PHASE MAGNETIC PATHS UNBALANCE OF PM LINEAR SYNCHRONOUS MOTOR USING MODULAR PRIMARY IRON-CORE STRUCTURE ................... 1743

Bai, Yinru ; Yang, Tianbo ; Kou, Baoquan

THE RESEARCH OF PARALLEL STRUCTURE AND COMPOSITE FUZZY CONTROL FOR LINEAR MACHINE BASED ON MAMDANI METHOD.......................................................................................... 1749

Xu, Mingfei ; Yu, Haitao ; Huang, Lei ; Meng, Gaojun

A LINEAR CONSEQUENT POLE STATOR PERMANENT MAGNET VERNIER MACHINE ......................... 1753Liu, Xianxing ; Zou, Chunhua ; Du, Yi ; Xiao, Feng

A C-CORE LINEAR FLUX-SWITCHING PERMANENT MAGNET MACHINE WITH POSITIVE ADDITIONAL TEETH................................................................................................................................................... 1757

Xiao, Feng ; Liu, Xianxing ; Du, Yi ; Shi, Kai ; Xu, Peifeng

MAGNETIC FIELD ANALYTICAL CALCULATION OF THE PERMANENT MAGNET SYNCHRONOUS LINEAR MOTOR WITH FRACTIONAL SLOT CONCENTRATED WINDINGS ................ 1762

Wang, Xudong ; Wang, Peilong ; Xu, Xiaozhuo

MAGNETIC MODELING OF A LINEAR MOTOR USING LUMPED APPROACH ........................................... 1768Gong, Jinlin ; Bracikowski, Nicolas ; Wang, Xiuhe

NONLINEAR CALCULATION METHODS OF LONG PRIMARY DOUBLE-SIDED LINEAR INDUCTION MOTOR ................................................................................................................................................... 1774

Jin, Xu ; Xidang, Yang ; Weiming, Ma ; Yuxing, Zhang ; Zhaolong, Sun

PROPOSING OF HIGH THRUST DOUBLE-SIDED PM-LSM WITH MAGNETIC CONFIGURATION ........................................................................................................................................................ 1779

Piao, He ; Suzuki, Kenji ; Dohmeki, Hideo

PERFORMANCE ANALYSIS OF A HIGH POWER DENSITY TUBULAR LINEAR SWITCH RELUCTANCE GENERATOR FOR DIRECT DRIVE MARINE WAVE ENERGY CONVERSION ................. 1781

Wang, Daohan ; Wang, Xiuhe ; Zhang, Chenghui

DESIGN AND CONTROL OF SINGLE PHASE TUBULAR PERMANENT MAGNET LINEAR MOTOR ........................................................................................................................................................................... 1786

Zhou, Yang ; He, Cheng ; Guojun, Yu ; Xiao, Liu ; Hao, Chen ; Yingjie, Huo

ANALYSIS OF A PERMANENT MAGNET LINEAR SYNCHRONOUS MOTOR WITH SEGMENTED ARMATURE FOR TRANSPORTATION SYSTEM......................................................................... 1791

Huang, Liren ; Chen, Yi ; Kong, Hao ; Lu, Qinfen ; Ye, Yunyue

CHARACTERISTICS COMPARISON OF CONVENTIONAL AND MODULAR E-CORE STATOR WITH SEGMENTAL ROTOR SWITCHED RELUCTANCE MOTORS ............................................... 1797

Ding, Wen ; Hu, Yanfang ; Wu, Luming

FAULT-TOLERANT PERFORMANCE OF A MUTUALLY COUPLED DUAL-CHANNEL SWITCHED RELUCTANCE GENERATOR UNDER OPEN-CIRCUIT FAULTS ................................................ 1802

Ding, Wen ; Hu, Yanfang ; Wu, Luming ; Liu, Yunpeng

COMPARATIVE EVALUATION OF VOLTAGE SPACE VECTOR CONTROL AND DIRECT INSTANTANEOUS TORQUE CONTROL FOR SWITCHED RELUCTANCE MOTOR DRIVES ..................... 1808

Ding, Wen ; Hu, Yanfang ; Wu, Luming

RESEARCH ON A SWITCHED RELUCTANCE MOTOR WITH AUXILIARY ROTOR TEETH .................... 1813Zhang, He ; Kou, Baoquan ; Qu, Yaru ; Jin, Yinxi ; Zhang, Hailin

SWITCHED RELUCTANCE MOTOR FOR ELECTRIC DRIVE OF OVERLAND BELT CONVEYOR .................................................................................................................................................................... 1817

Ptakh, G.K. ; Evsin, N.F. ; Zvezdunov, D.A. ; Rozhkov, D.V. ; Yakovenko, A.E.

CALCULATION OF INDUCTANCES WITH 3-D FEM FOR SRM WITH SEGMENTAL ROTORS AND FULLY-PICTHED WINDINGS ........................................................................................................................... 1822

Chen, Xiaoyuan ; Wu, Jianhua

OPTIMIZATION OF A SWITCHED RELUCTANCE MOTOR WITH UNEQUAL ROTOR ARC WIDTH ............................................................................................................................................................................. 1825

Kou, Baoquan ; Zhang, He ; Qu, Yaru ; Zhang, Hailin ; Jin, Yinxi

DECOUPLING CONTROL OF SINGLE WINDING BEARINGLESS SWITCHED RELUCTANCE MOTORS BASED ON SUPPORT VECTOR MACHINE INVERSE SYSTEM....................................................... 1829

Yang, Kai ; Zhu, Zhiying ; Sun, Yukun

DECREASE TORQUE RIPPLE FOR SYNRM USING BARRIER ARRANGEMENT DESIGN ......................... 1834Hong, Chan-Hee ; Liu, Huai-Cong ; Seol, Hyun-Soo ; Jun, Hyun-Woo ; Lee, Ju

A NOVEL ROTOR STRUCTURE DESIGN OF SINGLE-PHASE FLUX SWITCHING MOTOR ...................... 1838Zhang, Zongsheng ; Wang, Xiuhe ; Yang, Yubo

LOAD CHARACTERISTICS OF POSITION CONTROL USING MEASURED TORQUE CURVES FOR SWITCHED RELUCTANCE MOTOR ............................................................................................................... 1842

Abe, Takashi ; Tanaka, Yuichiro ; Higuchi, Tsuyoshi

VIBRATION AND NOISE ANALYZES OF CANNED SWITCHED RELUCTANCE MACHINES WITH DIFFERENT WINDING TOPOLOGIES ......................................................................................................... 1847

Laudensack, Christian ; Gerling, Dieter

DESIGN OF SYNCHRONOUS RELUCTANCE AND PERMANENT MAGNET SYNCHRONOUS RELUCTANCE MACHINES FOR ELECTRIC VEHICLE APPLICATION.......................................................... 1853

Guan, Y. ; Zhu, Z.Q. ; Afinowi, I.A.A ; Mipo, J.C. ; Farah, P.

OPTIMAL DESIGN OF AXIAL FLUX SWITCHED RELUCTANCE MOTOR FOR ELECTRIC VEHICLE APPLICATION ............................................................................................................................................ 1860

Ma, Jimin ; Qu, Ronghai ; Li, Jian

TORQUE RIPPLE MINIMIZATION OF SWITCHED RELUCTANCE MOTORS BY CONTROLLING THE PHASE CURRENTS DURING COMMUTATION ............................................................. 1866

Ye, Wei ; Ma, Qishuang ; Hu, Jiefeng

DESIGN OF STATOR AND ROTOR FOR NOISE REDUCTION OF SRM ........................................................... 1871Edamura, Kotaro ; Miki, Ichiro

DIRECT TORQUE AND FORCE CONTROL FOR DUAL-WINDING BEARINGLESS SWITCHED RELUCTANCE MOTOR ........................................................................................................................ 1875

Sun, Qin ; Cao, Xin ; Deng, Zhiquan

A NEW FAULT-TOLERANT SWITCHED RELUCTANCE MOTOR WITH RELIABLE FAULT DETECTION CAPABILITY ......................................................................................................................................... 1881

Lu, Kaiyuan

NONLINEAR DECOUPLING CONTROL OF THREE-PHASE AC/DC VOLTAGE-SOURCE CONVERTERS ............................................................................................................................................................... 1887

Shuai, Dingxin

A NOVEL 3D SPACE VECTOR PWM CONTROL METHOD FOR 3D MAGNETIC PROPERTY MEASUREMENT APPARATUS .................................................................................................................................. 1892

Zhang, Changgeng ; Yang, Qingxin ; Li, Yongjian ; Lu, Jingsi

A NOVEL SOFT-SWITCHING DC-DC CONVERTER WITH HIGH-STEP-DOWN CONVERSION ................ 1898Li, Fen ; Huo, Cailing ; Zhao, Jinbin ; Qu, Keqing

ELECTROLYTIC CAPACITOR FREE AND REDUCED 120[HZ] RIPPLE ON THE OUTPUT OF A SINGLE-STAGE CCM FLYBACK CONVERTER WITH POWER FACTOR CORRECTION FOR LED LIGHTINGS.................................................................................................................................................. 1904

Chae, Min-Cheol ; Lee, Joonmin ; La, Jae-Du ; Kim, Young-Jo ; Kim, Young-Seok

AUTOMATIC FREQUENCY TUNING METHOD OF OZONE POWER SUPPLY TO OPTIMIZE OZONE GENERATION SYSTEM ............................................................................................................................... 1910

Eom, Ju-Kyoung ; Kim, Min-Gi ; Kang, Jin-Wook ; Choi, Bong-Yeon ; Won, Chung-Yuen

COMPARATIVE ANALYSIS OF GAN FET POWER SYSTEM FOR MAXIMIZING SYSTEM BENEFIT.......................................................................................................................................................................... 1915

Ahn, Jung-Hoon ; Lee, Byoung-Kuk ; Kim, Jong-Soo

A NEW POWER CIRCUIT TOPOLOGY FOR ENERGY ROUTER....................................................................... 1921Lu, Sizhao ; Zhao, Zhengming ; Ge, Junjie ; Yuan, Liqiang ; Lu, Ting

IMPACT OF SOURCE INTERNAL RESISTANCE ON EFFICIENCY OF FOUR RESONANT WIRELESS POWER TRANSFER TOPOLOGIES..................................................................................................... 1926

Zhang, Yiming ; Lu, Ting ; Zhao, Zhengming ; He, Fanbo ; Yuan, Liqiang

DESIGN AND CONTROL OF A NOVEL ELECTROMAGNETIC DRIVER FOR WIRELESS MICRO-ROBOTS ........................................................................................................................................................... 1931

Cao, Guoen ; Kim, Hee-Jun

DESIGN OF A WIRELESS POWER TRANSMISSION SYSTEM FOR PORTABLE ELECTRONIC EQUIPMENT .................................................................................................................................................................. 1935

Cao, Guoen ; Kim, Hee-Jun ; Choi, Donchul ; Lim, Jaewoo ; Cheng, Puyang ; Bae, Seok

CONSIDERATIONS OF THE INFLUENCE OF SECONDARY-SIDE CONVERTER TYPE AND OF THE PRIMARY-SIDE INVERTER INPUT VOLTAGE ON THE EFFICIENCY OF INDUCTIVE POWER TRANSFER SYSTEM ............................................................................................................. 1939

Ota, Ryosuke ; Hoshi, Nobukazu ; Haruna, Junnosuke

ON-LINE MEASURING METHOD OF HIGH-POWER IGBT COLLECTOR CURRENT ................................. 1945Liang-deng, Hu ; Chi, Sun ; Yu-Lin, Chen ; Zhi-hua, Zhao

COMPREHENSIVE COMPARATIVE ANALYSIS OF TWO TYPES OF COMMONLY-USED LAYOUTS OF IGBT PACKAGES................................................................................................................................ 1952

Zhong, Yulin ; Meng, Jinlei ; Ning, Puqi ; Zhang, Dong ; Wen, Xuhui

EXPERIMENTAL RESEARCH ON STRAY INDUCTANCE EXTRACTION OF PLANAR BUS BARS BASED ON HVIGBT DYNAMIC CHARACTERISTICS............................................................................... 1957

Yuan, Liqiang ; Gu, Qing ; Feng, Gaohui ; Zhao, Zhengming ; Yang, Rilong ; Wang, Wensheng

LEAKAGE FIELD COMPUTATIONAL ANALYSIS OF CLOSED SLOT MOTOR BASED ON ANSOFT ........................................................................................................................................................................... 1963

Rui, Zhou ; Guo-li, Li ; Qun-jing, Wang ; Guang-hui, Fang ; Xi-wen, Guo

THE INFLUENCE OF OPTIMIZING ROTOR ON THE PERFORMANCE AND THE IRON LOSS OF THE PERMANENT MACHINE ............................................................................................................................. 1966

Yu, Yanan ; Du, Jinhua ; Liang, Deliang ; Liu, Xing ; Liang, Zhe

FEATURE INVESTIGATION OF AXIAL FLUX LEAKAGE OF A HYBRID EXCITATION SYNCHRONOUS MACHINE........................................................................................................................................ 1971

Liu, Ye ; Zhang, Zhuoran ; Dai, Ji

VECTOR JILES-ATHERTON HYSTERESIS MODEL AND ITS APPLICATION TO MAGNETIZING ANALYSIS FOR A FOUR-POLE ISOTROPIC BONDED NDFEB PERMANENT MAGNET ......................................................................................................................................................................... 1977

Zhang, Dianhai ; Ren, Ziyan ; Zhang, Yanli

RESEARCH OF THE DEMAGNETIZATION MECHANISM OF LINE-START PERMANENT MAGNET SYNCHRONOUS MOTOR UNDER OPERATING CONDITION OF SUDDEN REVERSAL ..................................................................................................................................................................... 1981

Tang, Xu ; Wang, Xiuhe

MINIMIZATION THE TORQUE RIPPLE OF FLUX-SWITCHING PERMANENT MAGNET MOTOR BASED ON ITERATIVE LEARNING CONTROL .................................................................................... 1985

Gu, Yejun ; Quan, Li ; Xiang, Zixuan

ELECTROMAGNETIC PERFORMANCES ANALYSIS OF FLUX-INTENSIFYING PERMANENT MAGNET SYNCHRONOUS MACHINE WITH MODULAR FRACTIONAL SLOT CONCENTRATED WINDINGS ................................................................................................................................... 1990

Tu, Hongjiao ; Zhu, Xiaoyong ; Quan, Li ; Chen, Long ; Xiang, Zixuan

DESIGN AND ELECTROMAGNETIC PERFORMANCE ANALYSIS OF A NEW STATOR-PERMANENT MAGNET BEARINGLESS MACHINE ............................................................................................. 1995

Jia, Hongyun ; Fei, Shumin ; Cheng, Ming ; Wang, Jianan ; Hua, Wei

RESEARCH ON MAIN INSULATION TEMPERATURE FIELD FOR OPEN-TYPE HIGH ENERGY DENSITY PERMANENT MAGNET MOTOR .......................................................................................... 1999

Wang, Sen ; Lv, Zongshu ; Xiao, Linyuan ; Zhao, Yangyang ; Yan, Hongkui ; Qiao, Guangzhou

THE EFFECTS OF STATOR AND ROTOR ECCENTRICITIES ON MEASUREMENT ACCURACY OF AXIAL FLUX VARIABLE-RELUCTANCE RESOLVER WITH SINUSOIDAL ROTOR ............................................................................................................................................................................ 2004

Shang, Jing ; Wang, Hao ; Chen, Mimi ; Cong, Ning ; Li, Yong ; Liu, Chengjun

THE DECOUPLING STUDY ON THE DUAL-CHANNEL RADIAL FLUX RELUCTANCE RESOLVER WITH COMMON MAGNETIC CIRCUIT ........................................................................................... 2008

Wang, Hao ; Cong, Ning ; Li, Tingting ; Shang, Jing ; Liu, Chengjun ; Chen, Mimi ; Li, Yong

SKEW EFFECT ON DEMAGNETIZATION OF PERMANENT MAGNET SYNCHRONOUS MACHINES WITH THREE-PHASE SHORT-CIRCUIT FAULT ............................................................................ 2014

Yu, Chen ; Qu, Ronghai ; Xu, Wei ; Li, Jian

SOFT MAGNETIC MATERIAL DEGRADATION DUE TO MANUFACTURING PROCESS: A COMPARISON OF MEASUREMENTS AND NUMERICAL SIMULATIONS ...................................................... 2018

von Pfingsten, G. ; Steentjes, S. ; Thul, A. ; Herold, T. ; Hameyer, K.

OPTIMAL DESIGN BASED ON GENETIC ALGORITHM AND CHARACTERISTIC TEST FOR GIANT MAGNETOSTRICTIVE ACTUATOR........................................................................................................... 2025

Jingsong, Li ; Qingxin, Yang ; Xian, Zhang ; Rongge, Yan

COMPARISON OF ELECTROMAGNETIC PERFORMANCES OF AMORPHOUS AND NANOCRYSTALLINE CORE-BASED HIGH FREQUENCY TRANSFORMERS ................................................ 2028

Liu, Xiaojing ; Wang, Youhua ; Islam, Md.Rabiul ; Lei, Gang ; Liu, Chengcheng ; Zhu, Jianguo

ANALYSIS OF ELECTROMOTIVE FORCE CHARACTERISTICS AND DEVICE IMPLEMENTATION FOR FERROFLUID BASED ENERGY HARVESTING SYSTEM .................................... 2033

Oh, Dae Woong ; Sohn, Dong Yoon ; Byun, Doo Gyoon ; Kim, Young Sun

IMPACT OF BUILT-IN LUNG-TYPE MAGNETIC SHIELDING ON SHORT-CIRCUIT STRENGTH OF LARGE POWER................................................................................................................................ 2039

Zhang, Bo ; Li, Yan ; Tang, Laiquan

TIME-STEPPING FINITE ELEMENT ANALYSIS ON IRON LOSS DISTRIBUTION OF CAGE INDUCTION MOTORS ................................................................................................................................................. 2043

Haisen, Zhao ; Bo, Wang ; Run-hao, Piao ; Weifu, Lu

AN IMPROVED METHOD TO ESTIMATE INITIAL ROTOR POSITION FOR SURFACE-MOUNTED PERMANENT MAGNET SYNCHRONOUS MOTORS ....................................................................... 2050

He, Leijie ; Ma, Jien ; Fang, Youtong ; Liang, Sizhuang

A NEW FUZZY ACTIVE-DISTURBANCE REJECTION CONTROLLER APPLIED IN PMSM POSITION SERVO SYSTEM........................................................................................................................................ 2055

Gai, Jiang-tao ; Huang, Shou-dao ; Huang, Qing ; Li, Meng-qiu ; Wang, Hui ; Luo, De-rong ; Wu, Xuan ; Liao, Wu

POSITION CONTROL FOR PMSM SERVO SYSTEM USING NON-SMOOTH FEEDBACK AND DISTURBANCE ESTIMATION COMPENSATION.................................................................................................. 2060

Jie, Zhang ; Chuang, Liu ; Renhua, Jiang ; Chengyu, Wang

A NOVEL ACCELERATION ESTIMATION ALGORITHM FOR MECHANICAL VIBRATION SUPPRESSION OF TWO-MASS SYSTEM ................................................................................................................. 2066

Jin, Jie ; Huang, Surong

AN ENHANCED RELIABILITY METHOD OF INITIAL ANGLE DETECTION ON SURFACE MOUNTED PERMANENT MAGNET SYNCHRONOUS MOTOR ......................................................................... 2071

Huang, Keyuan ; Wang, Li ; Jiang, Zhi ; Huang, Shoudao

A SMALL SIZE AND LOW COST CONTROLLER OF PERMANENT MAGNET SYNCHRONOUS MOTOR............................................................................................................................................ 2077

Zhu, Cheng ; Yang, Kai ; Liu, Yang ; Zhang, Yingli ; Pan, Zhicheng ; Wei, Xubiao

EXPERIMENTAL VERIFICATION OF NOVEL HYDROGEN SUPPLY SYSTEM ON A HIGH-PRESSURE TANKLESS FUEL CELL ELECTRIC VEHICLE ................................................................................ 2082

Nakata, Sho ; Tomoda, Keisuke ; Hoshi, Nobukazu ; Haruna, Junnosuke

OVERCURRENT SUPPRESSION SCHEME FOR DC BUS CURRENT AT SUDDEN LOAD CHANGE OF INTERIOR PERMANENT MAGNET SYNCHRONOUS MOTOR ................................................. 2088

Oba, Tomohiro ; Hoshi, Nobukazu ; Akiyama, Kazunari ; Suemasu, Hiroki ; Matsuoka, Hiroshi ; Haruna, Junnosuke

INFLUENCE OF PERIODIC CARRIER FREQUENCY MODULATION ON STATOR STEEL CORE LOSS AND ROTOR EDDY CURRENT LOSS OF PERMANENT MAGNET SYNCHRONOUS MOTOR............................................................................................................................................ 2094

Yongxiang, Xu ; Qingbing, Yuan ; Jibin, Zou ; Hao, Wang

INFLUENCE OF PERIODIC CARRIER FREQUENCY MODULATION ON INVERTER LOSS OF PERMANENT MAGNET SYNCHRONOUS MOTOR DRIVE SYSTEM................................................................ 2101

Yongxiang, Xu ; Qingbing, Yuan ; Jibin, Zou ; Hao, Wang

RESEARCH ON SINGLE-PULSE CONTROL OF TRACTION PMSM IN HIGH SPEED TRAIN BASED ON CO-SIMULATION MODEL..................................................................................................................... 2107

Kong, Hao ; Shi, Jiameng ; Huang, Liren ; Lu, Qinfen ; Ye, Yunyue ; Jiang, Zhongqi

COMPARISON OF SYNCHRONIZATION CONTROL TECHNIQUES FOR TRACTION MOTORS OF HIGH-SPEED TRAINS ......................................................................................................................... 2114

Li, Jian ; Fang, Youtong ; Huang, Xiaoyan ; Li, Jing

ELEVATOR ENERGY REGENERATIVE UNIT (EERU) FOR ENERGY SAVING IN A PERMANENT MAGNET MOTOR ELEVATOR SYSTEM ...................................................................................... 2120

Plangklang, Boonyang ; Kantawong, Sittichai ; Dangeam, Sirichai ; Kumsuwan, Yuttana

OPTIMAL DESIGN OF INTERIOR PERMANENT MAGNET SYNCHRONOUS MACHINE FOR ELECTRIC SPINDLE .................................................................................................................................................... 2125

Pan, Zhicheng ; Yang, Kai ; Wei, Xubiao ; Zhu, Cheng ; Zhang, Yingli

OPTIMAL EFFICIENCY CONTROL OF MODULAR PMSM ON EVS BASED ON ISO EFFICIENCY CONTOURS ........................................................................................................................................... 2131

Zhang, Yingli ; Yang, Kai ; Xie, Hongqin ; Zhu, Cheng ; Wei, Xubiao ; Pan, Zhicheng

ANALYSIS AND REDUCING METHODS OF COGGING TORQUE ON PERMANENT MAGNET AC SERVO MOTOR ...................................................................................................................................................... 2136

Dang, Chengtao ; Zhou, Wei ; Yin, Licheng ; Tong, Ningze

BEARINGLESS MOTOR'S RADIAL SUSPENSION FORCE CONTROL BASED ON VIRTUAL WINDING CURRENT ANALYSIS............................................................................................................................... 2141

Li, Hui ; Zhu, Huangqiu

CALCULATION OF MAGNETS' AVERAGE OPERATING POINT DURING THE STARTING PROCESS OF LINE-START PERMANENT MAGNET SYNCHRONOUS MOTOR ............................................ 2147

Tang, Xu ; Wang, Xiuhe

COMPARISON OF TORQUE DENSITIES IN ALTERNATE WOUND-FIELD SWITCHED FLUX MACHINES ..................................................................................................................................................................... 2151

Zhou, Y.J. ; Zhu, Z.Q. ; Ge, X.

STUDY ON KEY TECHNOLOGIES OF PERMANENT MAGNET SYNCHRONOUS MOTOR DESIGN FOR ELECTRIC VEHICLES ....................................................................................................................... 2158

Xie, Ying ; Ge, Hongyan ; Yang, Zhongxue ; Lv, Sen

ANALYSIS OF TORQUE CHARACTERISTICS OF MAGNETIC GEARS........................................................... 2164Bai, Jingang ; Liu, Yong ; Lin, Jia ; Song, Zhiyi ; Wang, Weinan

MODELLING AND DESIGN OF COMPLEX GEOMETRY PARTS VIBRATORY CONVEYING ................... 2170Shi, Dan ; Civet, Yoan ; Perriard, Yves

ADAPTIVE FUZZY TRACKING CONTROL BASED ON BACKSTEPPING FOR PERMANENT MAGNET SPHERICAL MOTOR................................................................................................................................. 2176

Wen, Yan ; Wang, Qunjing ; Li, Guoli ; Guo, Xiwen

VOLUME 4

ROTOR ORIENTATION DETECTION METHOD OF SPHERICAL MOTOR BASED ON SINGLE 2-DOF OPTICAL SENSOR ........................................................................................................................................... 2182

Wang, Yan ; Wang, Qunjing ; Qian, Zhe ; Wen, Yan ; Ma, Shan

RESEARCH OF ORIENTATION DETECTION METHOD FOR SPHERICAL MOTOR AND EFFECT ON PD CONTROL SYSTEM BASED ON MACHINE VISION ............................................................... 2186

Qian, Zhe ; Wang, Qunjing ; Guo, Xiwen ; Li, Guoli ; Ma, Shan

ADAPTIVE FUZZY DECOUPLING CONTROL FOR PERMANENT MAGNET SPHERICAL MOTOR DYNAMIC SYSTEM...................................................................................................................................... 2192

Guo, Xiwen ; Wang, Qunjing ; Li, Guoli ; Qian, Zhe ; Wen, Yan ; Zhao, Yuan ; Yin, Yaqin

OPTIMISATION OF THE MOVER KINETIC ENERGY OF A MINIATURE LINEAR ACTUATOR .................................................................................................................................................................... 2197

Besuchet, Romain ; Perriard, Yves

A NOVEL ELECTRONICALLY-CONTROLLED LINEAR ESCAPEMENT MECHANISM .............................. 2204Besuchet, Romain ; Civet, Yoan ; Perriard, Yves

DESIGN OF A CYLINDRICAL MOVING CORE SMALL LINEAR PM OSCILLATORY ACTUATOR .................................................................................................................................................................... 2211

Chen, Jinhua ; Liao, Youyong ; Zhang, Chi ; Sun, Peng

A STUDY OF NETWORK EMULATION FOR IP NETWORK-BASED CONTROL SYSTEM OF A SMALL MOTOR ............................................................................................................................................................ 2216

Matsuo, Kenshi ; Tajima, Katsubumi

DUAL-REDUNDANCY PMSM SERVO SYSTEM: USING SINGLE NEURON PID CONTROLLER................ 2221Liang, Zhe ; Liang, Deliang ; Kou, Peng ; Ze, Qiji

SPEED CONTROL WITH VIBRATION SUPPRESSION OF TWO-INERTIA SERVO SYSTEM BASED ON RESONANCE RATIO CONTROL .......................................................................................................... 2227

Cao, Ran ; Wang, Shuanghong ; Sun, Jianbo

A METHOD OF SPEED OBSERVATION BASED ON LEAST-SQUARES LINEAR-FITTING WITH WEIGHT FACTOR ............................................................................................................................................ 2232

Wenbin, Qiu ; Jianyun, Chai ; Xudong, Sun ; Rui, You

SERVO CONTROL TECHNIQUE OF GYRO STABILIZED PLATFORM FOR GRAVIMETER ..................... 2238Wei, Yongqing ; Xu, Jiangning ; Ma, Heng

MODELING AND COMPOSITE NONLINEAR FEEDBACK CONTROL OF VOICE COIL MOTOR IN HIGH PRECISION POSITIONING SYSTEM ...................................................................................... 2242

Chen, Qiming ; Li, Liyi ; Pei, Le ; Du, Pengcheng

PERFORMANCE IMPROVEMENT IN MINI-TYPE BRUSHLESS DC MOTORS WITH FRACTIONAL-SLOT CONCENTRATED WINDINGS ............................................................................................ 2248

Wang, Dongwen ; Tong, Ningze ; Li, Chongjian ; Liu, Chao ; Dang, Chengtao

DESIGN AND MANUFACTURE OF LLC RESONANT ULTRASONIC MOTOR DRIVE CIRCUIT1........................................................................................................................................................................ 2252

Peng, Pan ; Long, Jin ; Zhike, Xu ; Qianqian, Wang

CONTROL SCHEME FOR OBSTACLE AVOIDANCE NAVIGATION OF AUTONOMOUS MOBILE ROBOTS ......................................................................................................................................................... 2256

Choi, Youn-Ho ; Lee, Dong-Ha

DESIGN AND CHARACTERISTICS OF NOVEL 2-PHASE 4/3 SWITCHED RELUCTANCE MOTOR ........................................................................................................................................................................... 2260

Hieu, Pham Trung ; Lee, Dong-Hee ; Ahn, Jin-Woo

CHAOS GENETIC ALGORITHM OPTIMIZATION DESIGN BASED ON LINEAR MOTOR .......................... 2265Yan, Hongkui ; Lv, Zongshu ; Zhao, Yangyang ; Qiao, Guangzhou ; Xiao, Linyuan ; Yang, Zhou ; Gao, Kexuan ; Gao, Shutan

THE CHAOS RESEARCH ON ANTI-CONTROL OF BLDCM OF ELECTRICAL VEHICLE........................... 2269Liu, Lidong

RESEARCH ON LINEAR INDUCTION MOTOR OF STEREO GARAGE WITH LOW FREQUENCY .................................................................................................................................................................. 2273

Lu, Qinfen ; Yao, Yihua ; Ye, Yunyue ; Jiang, Zhongqi

A NOVEL SERIES BLOCK FEEDING METHOD FOR LONG PRIMARY LINEAR MOTOR .......................... 2279Zhang, Mingyuan ; Lin, Chengmei ; He, Na ; Li, Weichao ; Xu, Jin

FLUX LEAKAGE ANALYSIS OF TRANSVERSE-FLUX PM LINEAR MACHINE ............................................ 2284Yu, Bin ; Zheng, Ping ; Xu, Bing ; Zhang, Jing ; Han, Liang

DESIGN OF THE PARTICLE SWARM OPTIMIZED PID FOR PERMANENT MAGNET SYNCHRONOUS LINEAR MOTOR ........................................................................................................................... 2289

Wang, Xudong ; Xia, Tao ; Xu, Xiaozuo ; Feng, Haichao

A DESIGN OF EDDY CURRENT BRAKE FOR RAIL VEHICLE TRAINING SET............................................. 2294Dangeam, Sirichai ; Kinnares, Vijit

RESEARCH ON CONTROL STRATEGY OF FREE-PISTON STIRLING-ENGINE LINEAR-GENERATOR SYSTEM ................................................................................................................................................ 2300

Zheng, Ping ; Yu, Bin ; Zhu, Shaohong ; Gong, Quanrong ; Liu, Jiaqi

A PROPOSAL OF A NOVEL IDENTIFICATION METHOD OF RADIAL FORCE PARAMETERS FOR BEARINGLESS MOTORS ................................................................................................................................... 2305

Ando, Nozomu ; Nakao, Masahiro ; Hijikata, Kimio ; Tanaka, Yasuhiro

A DECOUPLING METHOD FOR CURRENT REGULATION IN BEARINGLESS MOTORS USING AC SUSPENSION CURRENT ......................................................................................................................... 2310

Hijikata, Kimio ; Ando, Nozomu ; Takemoto, Masatsugu ; Ogasawara, Satoshi

FINITE ELEMENT ANALYSIS OF A NOVEL BEARINGLESS FLUX-SWITCHING PERMANENT MAGNET MOTOR WITH THE SINGLE WINDING ..................................................................... 2315

Jia, Hongyun ; Fang, Chao ; Zhang, Tao

IMPLICIT GENERALIZED PREDICTIVE CONTROL OF AN ACTIVE MAGNETIC BEARING SYSTEM........................................................................................................................................................................... 2319

Wu, Chang ; Zhu, Changsheng

DESIGN OF A HIGH-PERFORMANCE LINEAR PERMANENT MAGNET GEAR ........................................... 2324Wang, Lili ; Jin, Mengjia ; Shen, Jianxin ; Huang, Zehua ; Wang, Jing

MULTIPLE LINEAR MOTOR CONTROL SYSTEM BASED ON FPGA .............................................................. 2327Xu, Yanwu ; Zhao, Jiwen ; Huang, Jian

PRELIMINARY STUDY OF A RELAY TRANSMITTED COOLING SYSTEM WITH HEAT PIPES AND LHP SYSTEM IN LARGE CAPACITY GAS INSULATED TRANSFORMERS .............................. 2332

Niu, Wenhao ; Zhang, Guoqiang ; Zhong, Haifeng

RESEARCH ON TWO-PHASE FLOW INSTABILITY IN PARALLEL INCLINED HOLLOW CONDUCTORS IN THE EVAPORATIVE INNER COOLING POWER GENERATOR ...................................... 2336

Jing, Yan ; Shunzhou, Yu

ANALYSIS OF HEAT TRANSFER PERFORMANCE FOR MEGAWATT WIND GENERATOR IN HIGH ALTITUDE EXTREME CONDITIONS ........................................................................................................... 2340

Ding, Shuye ; Zhang, Xiufeng ; Guan, Tianyu

FLUID-TO-FLUID MODELING STUDY ON CRITICAL HEAT FLUX OF R134A FLOW BOILING IN HELICALLY-COILED HORIZONTAL TUBES ................................................................................ 2347

Wang, Meixia ; Han, Jitian ; Ji, Cuilian ; Shao, Li ; Guo, Zhixiong

NUMERICAL SIMULATION OF AIR FLOW DISTRIBUTION IN LARGE AIR-COOLED TURBO GENERATOR ROTOR AT DIFFERENT ROTATION SPEED AND INLET PRESSURE ................................... 2352

Wang, Zuomin ; Han, Jiade

EFFECT OF FLOW RATE ON THE GAS-LIQUID TWO-PHASE PRESSURE DROP IN THE EVAPORATIVE COOLING GENERATOR STATOR BAR..................................................................................... 2356

Yu, Shunzhou ; Yan, Jing ; Cai, Jing

TEMPERATURE FIELD AND HEAT LOAD RESEARCH FOR MAIN PROPELLANT DIRECT DRIVE PERMANENT MAGNET MOTOR OF UNMANNED AERIAL VEHICLE .............................................. 2360

Wang, Sen ; Lv, Zongshu ; Zhao, Yangyang ; Yan, Hongkui ; Ren, Yanlong ; Xiao, Linyuan ; Qiao, Guangzhou

3D STEADY-STATE THERMAL LOAD ANALYSIS OF THE BUS-BAR IN LARGE-SCALE GENERATOR WITH EVAPORATIVE COOLING SYSTEM.................................................................................. 2365

Chen, Jinxiu ; Dong, Haihong ; Ruan, Lin

RESEARCH ON EVAPORATIVE COOLING MEDIUM FOR LARGE GENERATOR....................................... 2369Chen, Huichuang ; Yu, Shunzhou ; Zhu, Guanghui ; Xu, Weiguo

STEADY-STATE PERFORMANCE OF EVAPORATIVE COOLING SYSTEM OF STATOR BUSBAR IN HYDRO-GENERATOR ........................................................................................................................... 2372

Dong, Haihong ; Ruan, Lin ; Cao, Rui ; Guo, Shuqin

TEMPERATURE RISE ANOMALY ANALYSIS OF THE STATOR WINDING IN LARGE-CAPACITY HIGH-TORQUE-DENSITY EVAPORATE COOLING INDUCTION MOTOR............................... 2376

Yu, Zhongjun ; Wang, Dong

RESEARCH ON MOTOR IRON LOSSES AND TEMPERATURE FIELD CALCULATION FOR MINI ELECTRIC VEHICLE ........................................................................................................................................ 2380

Cuiping, Li ; Pujia, Cao ; Shukang, Cheng ; Feng, Chai

ANALYSIS OF GAS-LIQUID-SOLID STATOR-INSULATION SYSTEM IN THE EVAPORATIVE COOLING TURBOGENERATOR ............................................................................................................................... 2384

Liu, Zhi ; Ruan, Lin

THEORETICAL AND EXPERIMENTAL STUDY OF THE INFLUENCE OF DIFFERENT SPRAY INCLINATIONS AND POSITIONS ON SPRAY COOLING HEAT TRANSFER .................................................. 2389

Zhang, Peng ; Ruan, Lin

ANALYSIS OF 3D THERMAL FIELD IN THE STATOR OF HIGH-CAPACITY AND HIGH-TORQUE-DENSITY MOTOR WITH FORCED EVAPORATIVE-COOLING SYSTEM ..................................... 2392

Zhang, Fan ; Wang, Dong ; Liu, Dezhi ; Yu, Zhongjun

A STUDY OF RELIABILITY IMPROVEMENT OF HIGH CAPACITY COOLING SYSTEM FOR MACHINE TOOL ........................................................................................................................................................... 2396

Sung, Baek Ju ; Kim, Do Sik

COOLING METHOD OF PERIODIC PULSE-TYPE LINEAR INDUCTION MOTOR ARMATURE ............... 2403Lu, Lu ; Ma, Weiming ; Zhang, Yuxing ; Ouyang, Bin ; He, Na ; Hu, Anqi

CURRENT PROGRESS IN HIGH THERMAL CONDUCING INSULATION TECHNOLOGY FOR LARGE CAPACITY TURBINE GENERATOR.......................................................................................................... 2409

Harakawa, Takashi ; Sawa, Fumio ; Okamoto, Tetsushi ; Hatano, Hiroshi ; Nagakura, Ken

OPTIMIZATION DESIGN AND ANALYSIS OF COOLING SYSTEM USED FOR MINI ELECTRIC VEHICLE MOTOR................................................................................................................................... 2413

Cuiping, Li ; Feng, Chai ; Xichao, Feng ; Shukang, Cheng

RESEARCH ON MATRIX CONVERTER OPERATED AS STATIC REACTIVE POWER GENERATOR ................................................................................................................................................................. 2418

Mingming, Shi ; Bing, Chen ; Dan, Gong ; Xiaodong, Yuan

CHAIN CIRCUIT ACTIVE POWER FILTER FOR HIGH VOLTAGE HIGH POWER APPLICATIONS ............................................................................................................................................................. 2422

Chen, Junling ; Yuan, Xuefei

REACTIVE POWER AND HARMONICS COMPENSATION USING A FLYING CAPACITOR MULTILEVEL INVERTER .......................................................................................................................................... 2426

Wijit, Pratompong ; Polmai, Sompob

SUPPRESSION OF SUB-SYNCHRONOUS OSCILLATION CAUSED BY HVDC USING SUPPLEMENTARY EXCITATION DAMPING CONTROLLER............................................................................ 2431

Dong, Xinghua ; Wang, Xiuhe ; Yang, Yubo

CONTROL AND EXPERIMENT OF A MODULAR MULTILEVEL CONVERTER-BASED HVDC TRANSMISSION SYSTEM ........................................................................................................................................... 2435

Luo, Yongjie ; Li, Yaohua ; Li, Zixin ; Wang, Ping ; Zhao, Cong ; Sun, Zhandong

PERFORMANCE STUDY OF SOLID STATE TRANSFORMER APPLYING BP ARTIFICIAL NEURAL NETWORK PID REGULATOR .................................................................................................................. 2440

Wang, Qingshan ; Liang, Deliang ; Du, Jinhua

PARAMETER DESIGN PRINCIPLE OF THE CAPACITORS AND INDUCTORS IN THE POWER ELECTRONIC TRANSFORMER BASED ON MMC ................................................................................ 2445

Sun, Zhandong ; Li, Y.H. ; Wang, P. ; Li, Z.X. ; Luo, Y.J. ; Qu, P.

HIGH VOLTAGE, HIGH POWER AND MEDIUM-FREQUENCY POWER TRANSFORMER PARAMETERS DESIGN ............................................................................................................................................... 2449

Zhan, Shen ; Long, Jin ; Jun, You ; Jianfeng, Zhao ; Peng, Pan ; Peng, Zhu

A SIMPLIFIED METHOD FOR CONTROLLING THE MODULAR MULTI-LEVEL CONVERTER ENERGY BASED ON MODIFIED CARRIER PHASE-SHIFT MODULATION ......................... 2454

Liao, Wu ; Huang, Shoudao ; Huang, Sheng ; Chu, Yanchao

CONTROL STRATEGY FOR BALANCING CAPACITOR VOLTAGE OF MODULAR MULTILEVEL CONVERTER ...................................................................................................................................... 2460

Ma, Shang ; Wang, Yi ; Lv, Jinli ; Yu, Guolong

COMPARISON OF DIFFERENT DC-LINK VOLTAGE BALANCING METHODS FOR CASCADE H-BRIDGE MULTILEVEL CONVERTER ............................................................................................. 2465

Li, Xiaojun ; Geng, H. ; Yang, G. ; Li, Ruiqi ; Zhang, Chao

RESEARCH AND DESIGN ON MULTI-TARGET CURRENT TRACKING CONTROL STRATEGY OF CASCADED H-BRIDGE STATIC VAR GENERATOR ............................................................... 2471

Yu, Yannan ; Xu, Dianguo ; Wu, Jian ; Xu, Rong ; Yu, Yong ; Yang, Rongfeng ; Yan, Jichi

CIRCULATING CURRENT ANALYSIS AND SUPPRESSION OF MODULAR MULTILEVEL CONVERTERS ............................................................................................................................................................... 2478

Zhang, Xing ; Wang, Ping

A NOVEL MODULATION WITH VOLTAGE BALANCING CONTROL FOR A MODULAR MATRIX CONVERTER ................................................................................................................................................ 2483

Li, Yao ; Xu, Lie ; Li, Yongdong

A VOLTAGE BALANCING CONTROLLER WITH FUZZY LOGIC STRATEGY FOR NEUTRAL POINT CLAMPED MULTILEVEL CONVERTER ................................................................................................... 2490

Tai, Bingyong ; Gao, Congzhe ; Liu, Xiangdong ; Lv, Jingliang

A UNIVERSAL POWER LOSS ESTIMATOR FOR THREE LEVEL IGCT CONVERTER ................................ 2495Xie, Luyao ; Weng, Guoqing ; Qi, Jun ; Zhang, Youbing

TORQUE RIPPLE REDUCTION IN PERMANENT MAGNET SYNCHRONOUS MACHINES WITH CONCENTRATED WINDINGS AND PRE-WOUND COILS....................................................................... 2501

Richnow, J. ; Gerling, D. ; Stenzel, P.

TORQUE RIPPLE REDUCTION OF FLUX-SWITCHING MACHINES WITH TWISTED-ROTOR STRUCTURE .................................................................................................................................................................. 2508

Xie, Dee ; Wang, Yu ; Deng, Zhiquan

ANALYSIS OF COGGING TORQUE IN SURFACE-MOUNTED PERMANENT MAGNET MACHINES WITH SEGMENTED STATORS ........................................................................................................... 2513

Yuan, Jian ; Shi, Cen-Wei ; Shen, Jian-Xin

INFLUENCE OF END-EFFECT ON TORQUE-SPEED CHARACTERISTICS OF VARIOUS SWITCHED FLUX PERMANENT MAGNET MACHINE TOPOLOGIES ............................................................ 2517

Al-Ani, M.M.J. ; Zhu, Z.Q.

ANALYSIS AND OPTIMIZATION ON CHARACTERISTICS OF BRUSHLESS DC MOTORS BASED ON OVERLAPPING COMMUTATION........................................................................................................ 2524

Hongsheng, Hou ; Weiguo, Liu

SENSORLESS DTC OF A SELF-DECELERATING PERMANENT-MAGNET WHEEL MOTOR AT FULL SPEED RANGE ............................................................................................................................................. 2529

Zhang, Li ; Fan, Ying ; Zhu, Weixia ; Gu, Lingling

INDUCTION MOTOR PARAMETER IDENTIFICATION BASED ON T-MODEL EQUIVALENT CIRCUIT.......................................................................................................................................................................... 2535

Fan, Ming ; Chai, Jianyun ; Sun, Xudong

PARAMETER IDENTIFICATION OF NINE-PHASE INDUCTION MACHINES WITH CONCENTRATED WINDINGS ................................................................................................................................... 2540

Liu, Zicheng ; Zheng, Zedong ; Li, Yongdong ; Peng, Ling

IDENTIFICATION OF SELF-TUNING INDUCTION MOTOR DRIVE SYSTEM BASED ON IMPROVED LEAST-SQUARE ALGORITHM........................................................................................................... 2545

Mao, Dinghui ; Qiu, Jianqi ; Shi, Cenwei

A SIMPLIFIED APPROACH FOR IDENTIFICATION OF PARASITIC CAPACITANCES IN THREE-PHASE INDUCTION MOTOR DRIVEN BY PWM INVERTER .............................................................. 2550

Riehl, Rudolf Ribeiro ; Ulson, Jose Alfredo Covolan ; Andreoli, Andre Luiz ; Alves, Alceu Ferreira

INFLUENCE OF MECHANICAL PARAMETERS ON POWER EFFICIENCY OF INDUCTION MOTORS ......................................................................................................................................................................... 2555

Li, Juan ; Shen, Jian-Xin

MEASURED LOSS EVALUATION OF ASYMMETRICAL PARAMETER TYPE TWO-PHASE INDUCTION MOTOR SUPPLIED WITH A THREE-LEG VOLTAGE SOURCE INVERTER .......................... 2561

Kongsuk, Prayad ; Promkhun, Watcharin ; Kinnares, Vijit

INTEGRATED SYSTEM FOR ELECTRICAL GENERATION AND BOOSTING (ISGB) .................................. 2567Keller, Robert ; Mese, Erkan ; Maguire, Joel

DESIGN OF DUAL ROTOR — AXIAL GAP PMVM FOR HYBRID ELECTRIC VEHICLE ............................. 2573Kokubo, Yohei ; Shimomura, Shoji

DC MICRO-GRID BASED ON DC TRACTION POWER SUPPLY SYSTEM AND ELECTRIC VEHICLE BATTERIES CHARGING & DISCHARGING SYSTEM....................................................................... 2579

Meng, Ming ; Guo, Mingwei ; Yuan, Yaning ; Jiang, Li ; Liu, Jian ; Hu, Dalong ; Cong, Haiyang ; Hao, Dan

DESIGN OF AN AUTOMOTIVE 48 V INTEGRATED STARTER-GENERATOR ON THE BASIS OF AN INDUCTION MACHINE WITH CONCENTRATED WINDINGS.............................................................. 2583

Patzak, Adrian ; Gerling, Dieter

DESIGN AND OPERATIONAL ANALYSES OF AN ELECTROMAGNETIC HYBRID SHOCK ABSORBER SYSTEM FOR SCOOTER APPLICATION.......................................................................................... 2590

Liu, Cheng-Tsung ; Hwang, Chang-Chou ; Lin, Wei-Ping

INVESTIGATION OF A FIVE-PHASE 30-SLOT/32-POLE IN-WHEEL OUTER-ROTOR PERMANENT-MAGNET SYNCHRONOUS MACHINE FOR ELECTRIC VEHICLES ...................................... 2595

Sui, Yi ; Liu, Yong ; Wang, Pengfei ; Wu, Fan ; Yu, Bin

STABILITY OF DC-LINK VOLTAGE AFFECTED BY PHASE-LOCKED LOOP FOR DFIG-BASED WIND TURBINE CONNECTED TO A WEAK AC SYSTEM .................................................................... 2600

Wang, Dong ; Hu, Jiabing ; Huang, Yunhui ; Wang, Ningbo ; Zhou, Qiang

CONTROL OF CONVERTER-BASED GENERATORS FOR A SINGLE-PHASE MICROGRID ...................... 2607Polmai, Sompob

COMPARISON OF INTERIOR AND SURFACE PERMANENT MAGNET MACHINES WITH FRACTIONAL SLOT CONCENTRATED WINDINGS FOR DIRECT-DRIVE WIND GENERATORS ............................................................................................................................................................... 2612

Chen, Hong ; Qu, Ronghai ; Li, Jian ; Zhao, Bo

SYNCHRONIZING STABILITY OF DFIG-BASED WIND TURBINES ATTACHED TO WEAK AC GRID .......................................................................................................................................................................... 2618

Hu, Qi ; Hu, Jiabing ; Yuan, Hao ; Tang, Haiyan ; Li, Yan

SMALL SIGNAL MODELING AND STABILITY ANALYSIS OF A DFIG BASED WIND POWER SYSTEM UNDER UNBALANCED GRID VOLTAGE CONDITION ...................................................................... 2625

Wang, Tao ; Nian, Heng

STABILITY ANALYSIS OF GRID-CONNECTED CONVERTER BASED ON INTERCONNECTED SYSTEM IMPEDANCE MODELING UNDER UNBALANCED GRID CONDITIONS ................................................................................................................................................................. 2631

Yang, Hongyu ; Nian, Heng

RESEARCH ON OPTIMIZATION REGULATION METHOD OF AMPERE DENSITY AND COIL SPACE FACTOR FOR SWITCHED RELUCTANCE MACHINE ........................................................................... 2637

Sun, Peng ; Zhang, Chi ; Chen, Jinhua ; Ningbo, Fei Zhao

INFLUENCE OF ROTOR POLE ARC ON GENERATING AND MOTORING PERFORMANCE OF DOUBLY SALIENT ELECTRO-MAGNETIC MACHINES............................................................................... 2642

Zhou, Yu ; Zhang, Zhuoran ; Wang, Yin ; Yu, Li

EVALUATION OF EFFICIENCY OPTIMIZED VARIABLE FLUX RELUCTANCE MACHINE FOR EVS/HEVS BY COMPARING WITH INTERIOR PM MACHINE................................................................. 2648

Liu, X. ; Zhu, Z.Q. ; Wu, D.

DESIGN OF NOVEL 12/14 BEARINGLESS PERMANENT BIASED SWITCHED RELUCTANCE MOTOR ........................................................................................................................................................................... 2655

Xue, Bingkun ; Wang, Huijun ; Bao, Junfang

THE EFFECT OF EXCITATION ANGLES IN SINGLE-PULSE CONTROLLED SWITCHED RELUCTANCE MACHINES ON ACOUSTICS AND EFFICIENCY ...................................................................... 2661

Klein-Hessling, A. ; Burkhart, B. ; Scharfenstein, D. ; De Doncker, R.W.

SUPPRESSING CONTROL OF RISING BUS VOLTAGE FOR SWITCHED RELUCTANCE MOTOR IN BRAKING OPERATION ......................................................................................................................... 2667

Gan, Chun ; Wu, Jianhua ; Wang, Ning ; Yang, Shiyou ; Hu, Yihua

LOSS INVESTIGATION OF MOTOR INTEGRATED PERMANENT MAGNET GEAR.................................... 2673Frandsen, T.V. ; Rasmussen, P.O.

COST REDUCTION AND PERFORMANCE IMPROVEMENT OPPORTUNITIES IN AUTOMOTIVE ACCESSORY MOTORS EXPLOITING 3-D FLUX PATHS ........................................................ 2680

Deodhar, Rajesh P. ; Pride, Adam ; Bremner, Jonathan J.

DESIGN AND ANALYSIS OF A NOVEL HYBRID PERMANENT MAGNET MEMORY MOTOR.................. 2687Zhou, Yubin ; Wang, Wenbo ; Chen, Yangsheng

STUDY ON ELECTRICALLY EXCITATION SYSTEM OF A NOVEL BRUSHLESS SYNCHRONOUS MACHINE........................................................................................................................................ 2693

Zhang, Fengge ; Zhao, Yunwu ; Jia, GuangLong ; Lin, Ming

DESIGN AND CHARACTERISTIC STUDY OF LARGE TORQUE MICRO-NANO PLATFORM BASED ON PIEZOELECTRIC STACK ...................................................................................................................... 2697

Hong, Jin ; Long, Jin ; Zhike, Xu

DC MOTOR CONTROL BASED ON ARTIFICIAL NEURAL NETWORK AND ADAPTIVE PI ...................... 2701Pengpraderm, S. ; Ruangsinchaiwanich, S.

PARAMETER ESTIMATION OF PMSM FOR AIDING PI REGULATOR DESIGN OF FIELD ORIENTED CONTROL ................................................................................................................................................. 2705

Liu, Kan ; Zhu, Z.Q.

A NEW MOTOR SPEED EXTRACTION METHOD BASED ON THE COMBINATION OF SMOOTHING AND POLYNOMIAL FITTING FILTER .......................................................................................... 2712

Xiao, Xi ; Ding, Youshuang ; Yang, Qiuying

A COMPENSATION METHOD FOR SEQUENTIAL CURRENT SAMPLING IN MULTI-PHASE AC MOTOR CONTROL ................................................................................................................................................ 2716

Chen, Zhiqian ; Zhang, Qiao

AN IMPROVED ROTOR POSITION ESTIMATION IN PMSM WITH LOW-RESOLUTION HALL-EFFECT SENSORS............................................................................................................................................ 2722

Zhang, Xinghao ; Zhang, Wei

INFLUENCE OF BACK-EMF AND CURRENT HARMONICS ON POSITION ESTIMATION ACCURACY OF PERMANENT MAGNET SYNCHRONOUS MACHINE ............................................................ 2728

Almarhoon, Ali H. ; Zhu, Z.Q.

SELF IDENTIFICATION AND COMPENSATION OF POSITION SENSOR ERROR IN INTERIOR PERMANENT MAGNET SYNCHRONOUS MACHINE (IPMSM) DRIVES .................................... 2734

Cheng, Siwei ; Wang, Dong ; Chen, Junquan

NONLINEAR ADAPTIVE CONTROL OF INDUCTION MOTOR WITH SLIDING MODE FLUX OBSERVER ..................................................................................................................................................................... 2738

Zhang, W. ; Chen, J. ; Ren, Y. ; Li, L. ; Yao, W. ; Jiang, L.

SIMULATION AND ANALYSIS OF NOVEL THREE-WINDING SERIES-CONNECTED SINGLE-PHASE INDUCTION MOTOR UNDER FAULT OPERATION PROCESS ............................................................ 2743

Zhong, Hui ; Wang, Xiuhe ; Zhao, Lin ; Wen, Helin

ANALYSIS OF ELECTROMAGNETIC TORQUE OF A FIFTEEN-PHASE INDUCTION MACHINE IN TEN-PHASE OPERATION MODE .................................................................................................... 2750

Zheng, Xiaoqin ; Wang, Dong ; Chen, Junquan ; Cheng, Siwei ; Wei, Kun

THE RESEARCH OF VECTOR CONTROL SYSTEM HARMONIC SUPPRESSION TECHNOLOGY BASED ON VARIABLE INDUCTANCE REACTOR................................................................... 2754

Yu, Jianghua ; Bai, Baodong ; Chen, Dezhi ; Hu, Zhaofu

HIGH SPEED SOLID ROTOR INDUCTION MACHINE: ANALYSIS AND PERFORMANCES ....................... 2759Papini, L. ; Gerada, C. ; Gerada, D. ; Mebarki, Abdeslam

AN IMPROVED TWO-VECTORS-BASED MODEL PREDICTIVE TORQUE CONTROL WITHOUT WEIGHTING FACTORS FOR INDUCTION MOTOR DRIVES ........................................................ 2766

Zhang, Yongchang ; Yang, Haitao

DESIGN ASPECTS OF A HIGH TORQUE DENSITY MACHINE FOR AN AEROSPACE TRACTION APPLICATION ......................................................................................................................................... 2773

Galea, M. ; Roggia, S. ; Papini, L. ; Xu, Z. ; Tighe, C. ; Hamiti, M. ; Gerada, C. ; Pickering, S.

POWER CHARACTERISTICS OF ISOLATION UNITS IN A NOVEL POWER ELECTRONIC TRANSFORMER (PET) FOR LOCOMOTIVE TRACTION APPLICATIONS ..................................................... 2779

Gu, Chunyang ; Zheng, Zedong ; Li, Yongdong

CONTROL OF A THREE-SOURCES-POWER-NET FOR MORE ELECTRIC AIRCRAFT APPLICATION INCLUDING A FUEL-CELL-APU .................................................................................................. 2785

Hasic, Edin ; Gerling, Dieter

DESIGN AND ANALYSIS OF A NOVEL FAULT TOLERANT PERMANENT MAGNET SYNCHRONOUS MOTOR FOR AIRCRAFT APPLICATION ................................................................................ 2790

Xu, Jinquan ; Guo, Hong ; Yu, Kaiping ; Kuang, Xiaolin

LARGE SIGNAL STABILITY ANALYSIS FOR CONSTANT POWER LOADS WITH RC PARALLEL DAMPING FILTERS ............................................................................................................................... 2796

Liu, Xinbo ; Ma, Shuohan ; Li, Zhengxi ; Wang, Naixin

EXPERIMENTAL STUDY ON THE EFFECTS OF THE PULSE LOAD CHARACTERISTICS ON THE PERFORMANCE OF THE SLACK BUS GENERATOR ................................................................................. 2802

Farhadi, Mustafa ; Mohammed, Osama

A COORDINATED CONTROL STRATEGY OF DFIG-BASED WECS FOR HIGH VOLTAGE RIDE-THROUGH ENHANCEMENT .......................................................................................................................... 2808

Fang, Yang ; Sun, Dan ; Xiong, Pinghua

MODEL PREDICTIVE CONTROL OF SMART MICROGRIDS ............................................................................ 2815Hu, Jiefeng ; Zhu, Jianguo ; Guerrero, Josep M.

CONTROLLER DESIGN OF FLYWHEEL ENERGY STORAGE SYSTEMS IN MICROGRID ........................ 2821Feng, Ji ; Gongbao, Wang ; Lijun, Fu ; Yaqiao, Yang ; Ruitian, Wang ; Zhen, Xie

OPTIMAL RENEWABLE ENERGY FARM AND ENERGY STORAGE SIZING METHOD FOR FUTURE HYBRID POWER SYSTEM......................................................................................................................... 2827

Ma, Tan ; Lashway, Christopher R. ; Song, Yuan ; Mohammed, Osama

DYNAMIC COMPENSATING STRATEGY AND EN-STABILIZING COMPENSATOR TO ENHANCE THE STABILITY OF WIND FARMS INTEGRATED INTO WEAK GRID ...................................... 2833

Shang, Lei ; Hu, Jiabing ; Yuan, Xiaoming ; Zhao, Mingquan ; Liu, Gang ; Wang, Lin

A NOVEL OUTPUT POWER CONTROL FOR VARIABLE-SPEED SWITCHED RELUCTANCE GENERATORS USING ARTIFICIAL NEURAL NETWORK ................................................................................. 2839

Kerdtuad, P. ; Kittiratsatcha, S.

THE COUPLING CHARACTERISTICS ANALYSIS OF A NOVEL 12/14 TYPE BEARINGLESS SWITCHED RELUCTANCE MOTOR ........................................................................................................................ 2846

Bao, Junfang ; Wang, Huijun ; Xue, Bingkun

IS ACOUSTICALLY ORIENTED CONTROL ALWAYS INEFFICIENT FOR AN AUTOMOTIVE SWITCHED RELUCTANCE MACHINE? .................................................................................................................. 2852

Hofmann, A. ; Schenk, M. ; Weiss, C.P. ; Ralev, I. ; Klein-Hessling, A. ; De Doncker, R.W.

A THRUST FORCE CHARACTERISTICS MEASUREMENT OF THE PLANAR SWITCHED RELUCTANCE MOTOR USING FLUX LINKAGE CHARACTERISTICS........................................................... 2859

Zheng, Hong-Xin ; Cao, Guang-Zhong ; Huang, Su-Dan ; Li, Ling-Long ; Li, Ling-Ming

A HIGH EFFICIENCY DIRECT INSTANTANEOUS TORQUE CONTROL OF SRM USING COMMUTATION ANGLES CONTROL ..................................................................................................................... 2863

Wang, Yulin ; Wu, Huajiang ; Zhang, Wei ; Ma, Yunlong

DC EXCITED FLUX-SWITCHING MOTOR: ROTOR STRUCTURAL OPTIMIZATION................................. 2867Chishko, S.D. ; Tang, Y. ; Paulides, J.J.H. ; Lomonova, E.A.

3D GLOBAL WINDINGS HYBRID EXCITATION SWITCHING FLUX MACHINE .......................................... 2872Hoang, E. ; Dupas, A. ; Hlioui, S. ; Lecrivain, M. ; Gabsi, M.

A STUDY OF PIEZOELECTRIC GENERATOR BASED ON THE FLOW AROUND A BLUNT BODY ............................................................................................................................................................................... 2877

Gao, Xiu ; Xu, Zhike ; Gu, Juping ; Pan, Feifei ; Dong, Xiaoxiao

COMPARISON OF VARIABLE FLUX RELUCTANCE, SWITCHED FLUX AND FRACTIONAL SLOT PM12-STATOR SLOTS MACHINES HAVING 10- AND 14-ROTOR POLES............................................ 2882

Zheng, M. ; Liu, X. ; Zhu, Z.Q.

ANALYSIS AND DESIGN OF SEPARATED PERMANENT MAGNET ACTUATOR FOR 225AF MOLDED CASE CIRCUIT BREAKER ....................................................................................................................... 2888

Park, Hyeon-Jeong ; Kim, So-Hyun ; Ro, Jong-Suk ; Jung, Hyun-Kyo

AC BREAKDOWN VOLTAGE OF THERMAL BUBBLE INDUCED TWO-PHASE FLOW CONDITION OF INFLAMMABLE FLUOROCARBON BY SELF-HEATING ELECTRODE............................ 2892

Niu, Wenhao ; Zhang, Guoqiang ; Zhong, Haifeng ; Lin, Tao

RESEARCH ON ELECTROMAGNETIC PERFORMANCE OF AN AXIAL MAGNETIC-FIELD-MODULATED BRUSHLESS DOUBLE-ROTOR MACHINE FOR HYBRID ELECTRIC VEHICLES ...................................................................................................................................................................... 2896

Tong, Chengde ; Song, Zhiyi ; Zheng, Ping ; Bai, Jingang ; Zhao, Quanbin

NOVEL SWITCHED FLUX MACHINE WITH RADIAL AND CIRCUMFERENTIAL PERMANENT MAGNETS ............................................................................................................................................ 2903

Al-Ani, M.M.J. ; Zhu, Z.Q.

CONTROL OF A HYBRID EXCITATION MACHINE WITH OPEN-WINDING STRUCTURE FOR HYBRID ELECTRIC VEHICLES....................................................................................................................... 2910

Wang, Yu ; Deng, Zhiquan

A MODIFIED FLUX WEAKENING DIRECT TORQUE CONTROL FOR OPEN WINDING PMSM SYSTEM FED BY HYBRID INVERTER........................................................................................................ 2917

Zhou, Wenzhi ; Sun, Dan ; Lin, Bin

VOLUME 5

ANALYSIS ON CONSTANT POWER RANGE ENHANCEMENT IN HYBRID-INVERTER OPEN WINDING PMSM DRIVE SYSTEM ............................................................................................................................ 2923

Lin, Bin ; Sun, Dan

THE USE OF GENETIC ALGORITHMS FOR SPEED AND CURRENT CONTROLLER DESIGNS FOR IPMSM DRIVE ...................................................................................................................................................... 2930

Chottiyanont, Pakorn ; Konghirun, Mongkol ; Lenwari, Wanchak

CHAOS CONTROL OF THE PERMANENT MAGNET SYNCHRONOUS MOTOR USING AN IMPROVED SLIDING MODE CONTROLLER ......................................................................................................... 2936

Li, Ling-Long ; Huang, Su-Dan ; Wang, Yun ; Cao, Guang-Zhong ; Liu, Yan

ANALYSIS OF ELECTROMAGNETIC STIFFNESS IN SUBMERSIBLE MOTORS WITH INCLINED ROTOR ECCENTRICITY ........................................................................................................................ 2940

Li, Fuying ; Lv, Qiang ; Fang, Yong ; Liang, Na ; Bao, Xiaohua

RESEARCH ON DISCHARGING BEARING CURRENTS OF PWM INVERTER-FED VARIABLE FREQUENCY INDUCTION MOTOR ......................................................................................................................... 2945

Wang, Yu ; Bai, Baodong ; Liu, W.F.

HIGH FREQUENCY MODELING AND ANALYSIS OF VOLTAGE REFLECTION IN THE THREE-LEVEL PWM INVERTER-FED HIGH POWER INDUCTION MOTOR DRIVE SYSTEM ................. 2950

Xue, Gao-fei ; Pan, Qi-jun ; Meng, Qing-yun ; Yi, Cheng-lin ; Zhong, Ying

POWER SUPPLY FOR TESTING OF INDUCTION MOTORS AND GENERATORS COMPLIED WITH IEEE STD. 112-2004 FOR AN ENERGY CONVERSION LABORATORY................................................. 2955

Sawetsakulanond, B. ; Kinnares, V.

A MODEL PREDICTIVE CONTROL STRATEGY FOR DUAL INDUCTION MOTOR DRIVE SYSTEM FED BY FIVE-LEG INVERTER ................................................................................................................. 2959

Mei, Yang ; Yi, Zichen ; Li, Zhengxi

HIGH PERFORMANCE FIELD-WEAKENING CONTROL ALGORITHM OF SENSORLESS INDUCTION MOTOR USING SPEED ADAPTIVE FULL-ORDER OBSERVER ................................................. 2964

Wang, Bo ; Yu, Yong ; Sun, Wei ; Xu, Dianguo

A NEW FIVE-LEVEL CONVERTER FOR LOW-VOLTAGE MOTOR DRIVE APPLICATIONS .................... 2969Yuan, Xibo

A NEW METHOD TO REDUCE BOTH CONDUCTION AND COMMUTATION TORQUE RIPPLE FOR BLDC MACHINES ................................................................................................................................ 2975

Sheng, Tiantian ; Wang, Xiaolin ; Shan, Tao

PERFORMANCE EVALUATION OF SINGLE-PHASE PWM AC CHOPPER FED THREE-PHASE INDUCTION MOTOR ..................................................................................................................................... 2981

Phiphitsunthon, Benyathip ; Bumroongphuck, Chavaporn ; Promkhun, Watcharin ; Kinnares, Vijit

WIDE SPEED RANGE SIX-STEP MODE OPERATION OF IPMSM DRIVES WITH ADJUSTABLE DC-LINK VOLTAGE .......................................................................................................................... 2987

Ralev, Iliya ; Lange, Tobias ; De Doncker, Rik W.

INDUCED STATE SPACE AVERAGE MODEL OF ISOLATED POWER SYSTEM ........................................... 2994Wang, Gang ; Ji, Feng ; Fu, Lijun ; Shi, Qiaoming ; Jiang, Wentao

PERIODIC ORBIT MODEL OF 6-PULSE DIODE RECTIFIERS ........................................................................... 3000Wang, Gang ; Ma, Fan ; Fu, Lijun ; Shi, Qiaoming ; Chen, Yuhang

A NEW-TYPE PREDICTIVE DIRECT POWER CONTROL SOLUTION FOR THREE-PHASE GRID-CONNECTED INVERTERS .............................................................................................................................. 3005

Ding, Weizhong ; Pan, Zaiping

A STUDY ON A WIND TURBINE SIMULATOR WITH A DC MOTOR CONSIDERING VARIOUS MOMENTS OF INERTIA .......................................................................................................................... 3010

Liu, Baozhong ; Tatsuta, Fujio ; Nishikata, Shoji ; Suzuki, Katsumi

IMPROVED VOLTAGE VECTOR CONTROL FOR A STAND-ALONE DFIG SYSTEM BASED ON PREDICTIVE CURRENT REGULATION ALGORITHM ................................................................................ 3016

Zhu, Chong ; Zeng, Zhiyong ; Yuan, Qingwei ; Yang, Huan ; Zhao, Rongxiang

A NOVEL INERTIAL CONTROL STRATEGY FOR FULL-CAPACITY WIND TURBINE WITH PLL BY OPTIMIZING INTERNAL POTENTIAL RESPONSE............................................................................... 3024

Li, Shuai ; Hu, Jiabing ; Wang, Shuo ; He, Hongjie ; Wang, Lin ; Liu, Gang

MODELING AND CONTROL OF A NOVEL DUAL-STATOR BRUSHLESS DOUBLY-FED WIND POWER GENERATION SYSTEM............................................................................................................................... 3029

Cheng, Ming ; Wei, Xinchi ; Han, Peng ; Zhu, Ying ; Chen, Zhe

CONCERNS TO THE EMERGING GRID CODES FOR WIND TURBINES' LVRT IN WEAK AC GRID................................................................................................................................................................................. 3036

Yan, Yabing ; Hu, Jiabing ; Hu, Qi ; Zhao, Mingquan ; Li, Yan ; Tang, Haiyan

THE INFLUENCE OF CUTTING EDGE DEFORMATIONS ON MAGNETIC PERFORMANCE DEGRADATION OF ELECTRICAL STEEL.............................................................................................................. 3041

Kuo, Shih-Kang ; Lee, Wen-Chieh ; Lin, Sheng-Yang ; Lu, Chen-Yuan

INNOVATIVE NEEDLE WINDING METHOD USING CURVED WIRE GUIDE IN ORDER TO SIGNIFICANTLY INCREASE THE COPPER FILL FACTOR ............................................................................... 3047

Stenzel, P. ; Dollinger, P. ; Richnow, J. ; Franke, J.

INFLUENCE OF MANUFACTURE PROCESS ON MAGNETIC PROPERTY OF FECOV ALLOY................. 3054Chen, Junquan ; Wang, Dong ; Cheng, Siwei ; Wang, Jing

ANALYTICAL APPROACH FOR MAGNETIC AND ACOUSTIC MODELING OF FLUX-SWITCHING PERMANENT-MAGNET MOTORS: APPLICATION TO GEOMETRICAL OPTIMIZATION ............................................................................................................................................................ 3060

Boisson, Julien ; Louf, Francois ; Ojeda, Javier ; Mininger, Xavier ; Gabsi, Mohamed

THE BREATHING MODE-SHAPE 0: IS IT THE MAIN ACOUSTIC ISSUE IN THE PMSMS OF TODAY'S ELECTRIC VEHICLES? ............................................................................................................................ 3067

Hofmann, A. ; Qi, F. ; Lange, T. ; De Doncker, R.W.

CONTROL OF THREE PHASES — SINGLE PHASE MATRIX CONVERTER FOR TRANSIENT ELECTROMAGNETIC SOUNDING ........................................................................................................................... 3074

Li, Gang ; Yu, Shengbao ; Jia, Shaohua ; Wang, Qingji

IRON LOSS INVESTIGATION OF MINIATURIZED MAGNETIC GEARS HAVING SOLID CORES ............................................................................................................................................................................. 3078

Zanis, R. ; Borisavljevic, A. ; Jansen, J.W. ; Lomonova, E.A.

A RING-TYPE TRAVELING WAVE ULTRASONIC MOTOR USING OPTIMIZED DESIGN OF PIEZOELECTRIC CERAMICS ................................................................................................................................... 3083

Dong, Xiaoxiao ; Hu, Minqiang ; Jin, Long ; Pan, Peng

STUDY ON UNIT COMBINATION TYPE DIRECT-DRIVEN SUBMERSIBLE PERMANENT MAGNET MOTOR......................................................................................................................................................... 3087

Zhang, Bingyi ; Liu, Zhongqi ; Ding, Honglong ; Liu, Kai ; Feng, Guihong

DESIGN AND FIRST EXPERIMENTATION OF AN ELECTROMAGNETICALLY ACTUATED FERROFLUIDIC MICROPUMP .................................................................................................................................. 3092

Dehez, Bruno ; Bollen, Jerome ; Debelder, Emmanuel ; Smal, Olivier

DESIGN OF A NOVEL ELECTROMAGNETIC PLANETARY GEAR USED FOR HYBRID ELECTRIC VEHICLES ................................................................................................................................................. 3098

Bai, Jingang ; Liu, Yong ; Tong, Chengde ; Cheng, Luming ; Lin, Zhanxi

DESIGN AND ANALYSIS METHOD FOR A DC MAGNETIC CONTACTOR WITH A PERMANENT MAGNET............................................................................................................................................... 3104

Kim, So-Hyun ; Park, Hyeon-Jeong ; Ro, Jong-Suk ; Jung, Hyun-Kyo

PERFORMANCE ANALYSIS OF SWITCHED-FLUX MACHINES WITH HYBRID NDFEB AND FERRITE MAGNETS .................................................................................................................................................... 3110

Afinowi, I.A.A. ; Zhu, Z.Q. ; Guan, Y. ; Mipo, J.C. ; Farah, P.

FAULT TOLERANT CONTROL OF HARMONIC INJECTED NINE-PHASE FLUX SWITCHING PERMANENT MAGNET MOTOR DRIVE SYSTEM ............................................................................................... 3117

Yu, Feng ; Cheng, Ming ; Li, Feng ; Chau, K.T. ; Huang, Jin ; Hua, Wei

HYBRID MOTOR CONTROL APPLICATION WITH MOVING AVERAGE BASED LOW-PASS FILTER AND HIGH-PASS FILTER ............................................................................................................................ 3123

Sun, Wei ; Shen, Jian-Xin ; Wang, Kang ; Jin, Meng-Jia

STATOR IRON LOSS MEASUREMENT METHOD IN PERMANENT MAGNET SYNCHRONOUS MOTOR TO REMOVE THE MECHANICAL LOSS EFFECT................................................. 3131

Sakaue, Takahiro ; Akatsu, Kan

A GENERAL AND INTUITIVE APPROACH TO UNDERSTAND AND COMPARE THE TORQUE PRODUCTION CAPABILITY OF AC MACHINES .................................................................................................. 3136

Wang, Dong ; Lu, Kaiyuan ; Rasmussen, Peter Omand

A COMPARATIVE STUDY OF MODEL PREDICTIVE CURRENT CONTROL AND FOC FOR PMSM............................................................................................................................................................................... 3143

Li, Niu ; Ming, Yang ; Xianguo, Gui ; Dianguo, Xu

PERFORMANCE EVALUATION OF A SINGLE-PHASE GRID CONNECTED INDUCTION GENERATOR ................................................................................................................................................................. 3148

Yukhalang, S. ; Sawetsakulanond, B. ; Kinnares, V.

DYNAMIC LOSS MINIMIZING CONTROL OF DB-DTFC IM DRIVES USING A FLUX COMMAND LOOK AHEAD FILTER ......................................................................................................................... 3154

Ozimek, Patrick E. ; Hoffman, Jonathan D. ; Shi, Yuying ; Lorenz, Robert D.

REMANUFACTURING OF LOW-EFFICIENCY INDUCTION MACHINES WITH INTERIOR PERMANENT-MAGNET ROTORS FOR ENERGY EFFICIENCY IMPROVEMENT ........................................ 3161

Ni, Ronggang ; Ding, Li ; Gui, Xianguo ; Wang, Gaolin ; Zhang, Guoqiang ; Xu, Dianguo

ESTIMATION OF SATURATION CHARACTERISTIC OF INDUCTION MOTORS BY INJECTING SINUSOIDAL CURRENTS WITH CUSTOMIZED LOW FREQUENCY ........................................ 3166

Jiayang, Ruan ; Shanming, Wang

COMPARATIVE STUDY ON STRUCTURE OF LAMINATED-ROTOR HIGH-SPEED INDUCTION MACHINE ............................................................................................................................................... 3175

Zhang, Fengge ; Li, Yuchao ; Du, Guanghui

TRANSIENT BEHAVIOR OF DOUBLY FED INDUCTION GENERATOR DURING VOLTAGE RECOVERY .................................................................................................................................................................... 3180

Hu, Sheng ; Zou, Xudong ; Kang, Yong

VOLTAGE BALANCE CONTROL OF VIENNA-TYPE RECTIFIER USING SVPWM BASED ON 60 COORDINATE SYSTEM ........................................................................................................................................ 3187

Ma, Hui ; Xie, Yunxiang ; Yang, Yubo ; Shi, Zeyu

BOUNDARY AND OPTIMUM OF CONSTANT-VOLTAGE LOAD THREE-PHASE BRIDGE RECTIFIER ..................................................................................................................................................................... 3192

Zhao, Zhihua ; Gao, Qiang ; He, Kaiwen ; Tang, Jian

DIRECT POWER CONTROL OF PWM RECTIFIER UNDER UNBALANCED GRID VOLTAGE .................. 3199Zhang, Yongchang ; Qu, Changqi ; Li, Zhengxi ; Zhang, Yingchao

A NOVEL SWITCHED-CAPACITOR AC-AC CONVERTER WITH A RATIO OF 1/4....................................... 3205You, Jiachuan ; Hui, Cai

PWM STRATEGY OF A NOVEL CASCADED MULTI-LEVEL CONVERTER FOR BATTERY MANAGEMENT ............................................................................................................................................................. 3208

Chang, Fengqi ; Zheng, Zedong ; Li, Yongdong

ANALYSIS OF THE JENSEN'S MODEL, THE FRANDSEN'S MODEL AND THEIR GAUSSIAN VARIATIONS.................................................................................................................................................................. 3213

Sizhuang, Liang ; Youtong, Fang

PV POWERED THREE-LEG VSI FED ASYMMETRICAL PARAMETER TYPE TWO-PHASE INDUCTION MOTOR ................................................................................................................................................... 3220

Hayakwong, Ekkawid ; Kinnares, Vijit

MODELING AND OPERATION CHARACTERISTICS OF LARGE-SCALE PHOTOVOLTAIC POWER PLANTS BASED ON PSASP ......................................................................................................................... 3226

Xu, Yifei ; Qin, Meng ; He, Jiao ; Zhang, Dehua

A TWO-DIMENSIONAL DIRECT-DRIVE GENERATOR FOR WAVE ENERGY CONVERSION .................. 3231Pan, J.F. ; Zhang, Bo ; Cao, Guangzhong

CONTROL OF A MULTIFUNCTIONAL 3-PHASE 4-WIRE GRID CONNECTED CONVERTER USING ADAPTIVE HYSTERESIS CURRENT CONTROLLER ............................................................................. 3234

Prommeuan, Sakda ; Kinnares, Vijit ; Charumit, Chakrapong

STUDY OF DIRECT-DRIVE PERMANENT MAGNET SYNCHRONOUS GENERATORS WITH SOLID ROTOR BACK-IRON AND DIFFERENT WINDINGS ................................................................................ 3240

Jia, Shaofeng ; Qu, Ronghai ; Li, Jian ; Fan, Xinggang ; Zhang, Meng

INVESTIGATION OF LUMPED-PARAMETER THERMAL MODEL AND THERMAL PARAMETERS TEST FOR IPMSM ............................................................................................................................ 3246

Wang, Wenbo ; Zhou, Yubin ; Chen, Yangsheng

COMPUTATION OF RADIATED ELECTRIC FIELDS FROM CABLES USING THE 1D TIME-DOMAIN AND FREQUENCY-DOMAIN TLM METHODS ..................................................................................... 3253

Meng, Jin ; Zhang, Lei ; Tang, Jian ; Li, Yi ; He, Fangmin ; Xiao, Huan

COUPLING CALCULATION OF TEMPERATURE FIELD FOR DRY-TYPE SMOOTHING REACTOR ....................................................................................................................................................................... 3259

Cao, Jifeng ; Chen, Tuteng ; Jiang, Zhipeng ; Wen, Xishan ; Zhang, Meng

INVESTIGATION OF THE HEAT TRANSFER COEFFICIENT ON THE FINS FOR TOTAL ENCLOSED FAN COOLED PERMANENT-MAGNET MOTOR ............................................................................ 3264

Guo, Baocheng

MECHANICAL AND THERMAL MANAGEMENT DESIGN OF A MOTOR FOR AN AIRCRAFT WHEEL ACTUATOR .................................................................................................................................................... 3268

Xu, Z. ; Galea, M. ; Tighe, C. ; Hamiti, T. ; Gerada, C. ; Pickering, S.J.

INFLUENCE OF STATOR END-WINDING STRUCTURE ON THE END-WINDING LEAKAGE INDUCTANCE WITH METHOD OF VECTOR-POTENTIAL ................................................................................ 3274

Zhang, Weiling ; Wu, Xinzhen ; Wang, Dong

SIMULATION ANALYSIS OF LOAD CHARACTERISTICS OF ROLLER WASHERS UNDER BLDCM DIRECT DRIVING ......................................................................................................................................... 3278

Yong, Li ; Congyi, Zhang ; Liang, Wang ; Yucong, Wei ; Bo, Zhao ; Qian, Wang ; Jibin, Zou

UNIFIED SPIRAL VECTOR MODEL OF THE DUAL-STATOR BRUSHLESS DOUBLY-FED INDUCTION MACHINE ............................................................................................................................................... 3282

Han, Peng ; Cheng, Ming ; Wei, Xinchi ; Li, Ning

MEASUREMENT-PARAMETERIZED SYNCHRONOUS MACHINE MODEL WITH SPATIAL-HARMONICS .................................................................................................................................................................. 3289

Lange, Tobias ; Boesing, Matthias ; De Doncker, Rik W.

DESIGN AND ANALYSIS ON SWITCHED RELUCTANCE MOTOR SYSTEM USING FIELD-CIRCUIT COUPLED METHOD .................................................................................................................................. 3296

Gan, Chun ; Wu, Jianhua ; Zhang, Lifeng ; Yang, Shiyou ; Wang, Hairong

A NOVEL MODELICA BASED DESIGN PLATFORM FOR SWITCHED RELUCTANCE DRIVE SYSTEMS ........................................................................................................................................................................ 3302

Ji, Yang

INFLUENCES OF MACHINE STRUCTURE ON HIGH SPEED PM BLDC MOTOR ......................................... 3309Hao, He ; Shen, Jianxin ; Yuan, Cheng ; Qu, Qiang

STABILITY ANALYSIS FOR MATRIX CONVERTER FED PERMANENT MAGNET SYNCHRONOUS MOTOR SYSTEM BASED ON PDF CONTROL ........................................................................ 3313

Li, Huayu ; Nie, Ziling ; Hu, Fengge

COMPARISON OF PARALLEL BLDC FSPM MACHINES WITH STRONG FLUX-WEAKENING CAPABILITY .................................................................................................................................................................. 3318

Zhou, Pengfei ; Wang, Yu ; Deng, Zhiquan ; Xing, Shaobang

NOVEL EXTERNAL ROTOR SWITCHED FLUX MEMORY MOTOR WITH HYBRID MAGNETS ....................................................................................................................................................................... 3324

Wu, D. ; Zhu, Z.Q. ; Liu, X.

COMPARISON OF FPCB WINDINGS OF BLDC MACHINES WITH PARALELLY AND RADIALLY MAGNETIZED ROTOR POLES ............................................................................................................ 3331

Dehez, Bruno ; Baudart, Francois ; Perriard, Yves

SIMULTANEOUS OPTIMIZATION OF VOLTAGE VECTOR AND DUTY CYCLE IN MODEL PREDICTIVE TORQUE CONTROL OF PMSM DRIVES........................................................................................ 3338

Zhang, Yongchang ; Gao, Suyu

RESEARCH ON AN AXIAL-AXIAL FLUX COMPOUND-STRUCTURE PMSM WITH VARYING AIR GAP TO FULFILL FIELD-WEAKENING CONTROL..................................................................................... 3345

Zhao, Jing ; Yan, Yashuang ; Gu, Zhongxin ; Chen, Zhen ; Zheng, Ping

OPTIMAL DESIGN OF AN AXIAL FLUX PERMANENT MAGNET MOTOR.................................................... 3350Li, Hua-Yang ; Shen, Jian-Xin

EFFECT OF SATURATION ON IRON LOSS IN PMSM .......................................................................................... 3356Ding, Xiaofeng ; Guo, Hong ; Du, Min ; Li, Binbin ; Liu, Guanliang ; Zhao, Linlin

MONITORING OF SHAFT VOLTAGES AND GROUNDING CURRENTS IN ROTATING MACHINES ..................................................................................................................................................................... 3361

Stone, Greg ; Lloyd, Blake ; Sasic, Mladen

DESIGN AND LOSS ANALYSIS OF A NEW SELF-DECELERATING PM IN-WHEEL MOTOR .................... 3365Gu, Lingling ; Fan, Ying ; Zhang, Li ; Cheng, Ming ; Chau, K.T.

A NOVEL INERTIA IDENTIFICATION ALGORITHM FOR PMSM.................................................................... 3371Li, Niu ; Ming, Yang ; Xianguo, Gui ; Dianguo, Xu

LOW THD MODULATION STRATEGY FOR MATRIX & MULTI-LEVEL MATRIX CONVERTER BASED ON MODIFIED DVM............................................................................................................. 3376

Lin, Qiu ; Lie, Xu ; Yongdong, Li

PHASE-SHIFT SPACE VECTOR PULSE WIDTH MODULATION FOR NINE-SWITCH INVERTER ...................................................................................................................................................................... 3382

Jarutus, N. ; Kumsuwan, Y.

DESIGN OF A SELF-OSCILLATING CLASS D POWER AMPLIFIER FOR PIEZOELECTRIC ACTUATORS .................................................................................................................................................................. 3386

Liu, Xinchang ; Germano, Paolo ; Civet, Yoan ; Perriard, Yves

STUDY ON HIGH FREQUENCY INVERTER WITH 100KHZ CURRENT FEEDBACK CONTROL BY USING FPGA ....................................................................................................................................... 3392

Amano, Shunsuke ; Akatsu, Kan

HIGH POWER INDUCTION HEATING..................................................................................................................... 3398Phondon, Chainiyom ; Intani, Pattana

OPTIMAL CONTROL FOR SHUNT ACTIVE POWER FILTER BASED ON ADAPTIVE-HYSTERESIS CONTROLLER AND DROOP CONTROLLER ............................................................................... 3404

Xu, Shuai ; Zhang, Jianzhong ; Hu, Xing

SYSTEM FOR THE INSULATION FAULT DETECTION OF AC ELECTRIC MACHINES CORES, BASED ON MAGNETIC FIELD SCANNING ............................................................................................. 3411

Rams, Witold ; Rad, Michal ; Kandora, Wojciech

FAULT-TOLERANT PERFORMANCES OF SWITCHED RELUCTANCE MACHINE AND DOUBLY SALIENT PERMANENT MAGNET MACHINE IN STARTER/GENERATOR SYSTEM ................. 3417

Ze, Qiji ; Kou, Peng ; Liang, Deliang ; Liang, Zhe

FAULT TOLERANT CONTROL OF DOUBLE-STATOR-WINDING PMSM FOR OPEN PHASE OPERATION BASED ON ASYMMETRIC CURRENT INJECTION...................................................................... 3424

Wang, Zheng ; Chen, Jian ; Cheng, Ming

INTEGRATED FAULT DIAGNOSIS AND FAULT-TOLERANT CONTROL OF IPMSM SYSTEM ................ 3431Yao, Hongyang ; Li, Hongmei ; Rizzoni, Giorgio

FAULT DETECTION TECHNIQUE FOR IDENTIFYING BROKEN ROTOR BARS BY ARTIFICIAL NEURAL NETWORK METHOD ........................................................................................................ 3436

Wangngon, B. ; Sittisrijan, N. ; Ruangsinchaiwanich, S.

SYNTHESIS OF STATOR CURRENT WAVEFORM OF INVERTER-FED INDUCTION MOTOR WITH BROKEN BAR CONDITIONS .......................................................................................................................... 3441

Sittisrijan, N. ; Wangngon, B. ; Ruangsinchaiwanich, S.

DESIGN AND RESEARCH OF A NOVEL CONTROLLABLE REACTOR BASED ON TWO-PHASE MAGNETIC MATERIAL ................................................................................................................................ 3446

Chen, Zhiwei ; Bai, Baodong ; Chen, Dezhi ; Yu, Jianghua

EXTENDED MODEL OF FLUX DISPLACEMENT IN RECTANGULAR IRON SHEETS AND GEOMETRY-DEPENDENT HYSTERESIS LOSS CONSIDERING SATURATION ............................................ 3451

Bachheibl, Florian ; Gerling, Dieter

EQUIVALENT STATOR SLOT MODEL OF TEMPERATURE FIELD FOR HIGH TORQUE-DENSITY PERMANENT MAGNET SYNCHRONOUS IN-WHEEL MOTOR ...................................................... 3457

Liang, Peixin ; Pei, Yulong ; Chai, Feng ; Cheng, Shukang

3D ELECTROMAGNETIC AND THERMAL FIELD ANALYSIS OF EDGE INDUCTION HEATER .......................................................................................................................................................................... 3463

Li, Yilun ; Wang, Zeji ; Yang, Shiyou

AN IMPROVED METHOD FOR DESIGN OF SYMMETRICAL MULTIPHASE WINDING WITH OPTIMAL SPACE HARMONICS SPECTRUM ......................................................................................................... 3469

Cai, M. ; Henke, M. ; Canders, W.-R.

ELECTRICAL MACHINE OPTIMIZATION USING A KRIGING PREDICTOR................................................ 3476Duchaud, J.-L. ; Hlioui, S. ; Louf, F. ; Gabsi, M.

PER-UNIT HIL REAL-TIME SIMULATION MODELING & TEST OF PERMANENT MAGNET SYNCHRONOUS MOTOR BASED ON FPGA ........................................................................................................... 3482

Gao, Jin ; Song, Shiyang ; Huang, Surong

DESIGN OPTIMIZATION OF ELECTRICAL TRANSFORMER USING GENETIC ALGORITHM................ 3487Phaengkieo, D. ; Ruangsinchaiwanich, S.

MODELING AND CHARACTERIZATION OF A MEMS SYNCHRONOUS GENERATOR.............................. 3492Poliakine, Jasha ; Civet, Yoan ; Perriard, Yves

ELECTROKINETIC MODELING OF ION AND FLUIDIC TRANSPORT PROPERTY IN NANOPORE SYSTEMS ................................................................................................................................................. 3498

Xu, Honghua ; Fan, Chun ; Li, Kai

MATHEMATICAL ANALYSIS FOR PREDICTING AN UNBALANCED FORCE IN A SIMPLE ASYMMETRIC CIRCUIT USING MAXWELLIAN ELECTRODYNAMICS ........................................................ 3503

Banerjee, Arindam ; Radcliffe, P J

HYBRID EXCITED CLAW POLE ALTERNATORS: ATTEMPT TO SATISFY THE INCREASING POWER NEED ON BOARD................................................................................................................ 3510

Rebhi, Rabeb ; Ibala, Amina ; Masmoudi, Ahmed

CONSTRUCTION OF A 3KW, 250 KRPM PERMANENT MAGNET SYNCHRONOUS MACHINE FOR A COMBINED HEAT AND POWER UNIT ....................................................................................................... 3515

Novak, Martin ; Novak, Zdenek

DIRECT TORQUE CONTROL OF A PERMANENT MAGNET SYNCHRONOUS GENERATOR BASED ON SPACE VECTOR MODULATION .......................................................................................................... 3520

Hua, Xinyi ; Yang, Jianfei ; Wu, Huaren ; Liu, Jian

STUDY ON THE OPTIMIZATION OF BATTERY VOLTAGE IN OPEN-WINDING GENERATION POWER SYSTEM............................................................................................................................... 3524

Liu, Hui ; Wang, Yu ; Deng, Zhiquan ; Song, Lucheng

COMPARATIVE STUDY ON TWO FIELD ORIENTATION CONTROL METHODS FOR THE EXCITATION FIELD IN THE HYBRID EXCITATION SYNCHRONOUS GENERATOR ................................ 3530

Mingji, Liu ; Xiaoyan, Zhang ; Jianxin, Hu

DEVELOPMENT OF AN AIR-COOLED 150 KW HIGH SPEED PERMANENT MAGNET MOTOR WITH GRAMME RING WINDINGS FOR TURBO BLOWERS ............................................................. 3534

Dong, Jianning ; Huang, Yunkai ; Jin, Long ; Guo, Baocheng ; Zhou, Tao ; Lin, Heyun ; Dong, Jiyong

SENSORLESS IPMSM DRIVE SYSTEM USING SALIENCY BACK-EMF-BASED OBSERVER WITH MTPA CONTROL .............................................................................................................................................. 3539

Lin, Faa-Jeng ; Hung, Ying-Chih ; Chang, Jin-Kuan

HIGH BANDWIDTH ZERO VOLTAGE INJECTION METHOD FOR SENSORLESS CONTROL OF PMSM ........................................................................................................................................................................ 3546

Xie, Ge ; Lu, Kaiyuan ; Kumar, Dwivedi Sanjeet ; Riber, Rosholm Jesper

INDIRECT POSITION ESTIMATION METHOD FOR SWITCHED RELUCTANCE MOTOR USING SEARCHING WINDINGS................................................................................................................................ 3553

Wang, Cheng ; Deng, Zhiquan ; Cai, Jun ; Hu, Rongguang

SENSORLESS CONTROL OF SWITCHED RELUCTANCE MOTORS BASED ON HIGH FREQUENCY SIGNAL INJECTION ........................................................................................................................... 3558

Hu, Rongguang ; Deng, Zhiquan ; Cai, Jun ; Wang, Cheng

STABLE SENSORLESS V/F AND COSF =1 CONTROL FOR PERMANENT MAGNET SYNCHRONOUS MOTOR DRIVES ............................................................................................................................ 3564

Yang, Kai ; Yang, Xingxing ; Xie, Hongqin ; Liu, Yang ; Zhang, Yingli ; Wei, Xubiao

ACTIVE FLUX BASED FULL-ORDER DISCRETE-TIME SLIDING MODE OBSERVER FOR POSITION SENSORLESS IPMSM DRIVES............................................................................................................... 3569

Guoqiang, Zhang ; Gaolin, Wang ; Ronggang, Ni ; Dianguo, Xu

A NEW APPROACH FOR TEACHING POWER ELECTRONICS IN ELECTRICAL ENGINEERING COURSES........................................................................................................................................... 3573

Riehl, Rudolf Ribeiro ; Ulson, Jose Alfredo Covolan ; Andreoli, Andre Luiz ; Alves, Alceu Ferreira

PERFORMANCE EVALUATION OF SINGLE-PHASE FULL BRIDGE GRID-CONNECTED CONVERTER WITH REDUCED SWITCHING LOSSES ........................................................................................ 3579

Puripanyavanit, C. ; Wannakarn, P. ; Sardyoung, P. ; Kinnares, V.

HIERARCHICAL CONTROL SYSTEM OF MODULAR MULTILEVEL CONVERTER USED IN HIGH-VOLTAGE DIRECT CURRENT TRANSMISSION....................................................................................... 3584

Fan, Boran ; Wang, Kui ; Zheng, Zedong ; Li, Yongdong ; Wu, Xiaokun

AN IMPROVED 4-STEP COMMUTATION METHOD APPLICATION FOR MATRIX CONVERTER.................................................................................................................................................................. 3590

Guo, Yu ; Guo, Yougui ; Deng, Wenlang ; Zhu, Jianlin ; Blaabjerg, Frede

HYBRID SVPWM STRATEGY FOR DIODE-CLAMPED 3H-BRIDGE INVERTER ........................................... 3594Lin, Chengmei ; Wang, Gongbao ; Li, Weichao ; Nie, Shixiong ; Wang, Guangsen

FULL 3D EDDY CURRENT AND TEMPERATURE FIELD ANALYSIS OF LARGE HYDRO-GENERATORS IN DIFFERENT OPERATING CONDITIONS............................................................................... 3599

Wang, Haijun ; Zong, Risheng ; Liu, Lei ; Yang, Shiyou

TORQUE RIPPLE REDUCTION IN AN AXIAL-FLUX JIGSAW-COIL PERMANENT MAGNET MACHINE ....................................................................................................................................................................... 3604

Zhang, Zhaoqiang ; Brennvall, Jon Eirik ; Nilssen, Robert

NUMERICAL COMPUTATION OF COUPLED ELECTROMAGNETIC-THERMAL FIELD IN AN INDUCTION EDGE HEATER FOR THE HOT STRIP MILL........................................................................... 3611

Wang, Luyu ; Wang, Zeji ; Yang, Shiyou ; Li, Yilun

STUDY ON MAIN MAGNETIC FIELD OF ULTRA-HIGH VOLTAGE MAGNETICALLY CONTROLLED SATURATED REACTOR................................................................................................................. 3615

Ma, Chuang ; Bai, Baodong ; An, Zhen ; Dong, Yu

ANALYSIS OF TORQUE CAPABILITY AND QUALITY IN VERNIER PERMANENT MAGNET MACHINES ..................................................................................................................................................................... 3620

Li, Dawei ; Qu, Ronghai ; Li, Jian ; Wu, Leilei ; Xu, Wei

REDUNDANT PERFORMANCE OF MULTI-PRIMARY COUPLING LINEAR INDUCTION MOTOR ........................................................................................................................................................................... 3627

Sun, Zhaolong ; Ma, Weiming ; Ma, Mingzhong ; Lu, Junyong ; Xu, Jin ; Zhang, Yuxing

OPTIMAL DESIGN OF A LINEAR INDUCTION MOTOR FOR WOODWORKING MACHINE APPLICATION ............................................................................................................................................................... 3633

Wang, Shuai ; Miao, Dong-Min ; Shen, Jian-Xin

ANALYSIS OF COUPLING EFFECT OF DOUBLE-SIDE LINEAR INDUCTION MOTOR WITH SHIELDING STRUCTURE ........................................................................................................................................... 3638

Zhang, Yuxing ; Lin, Chengmei ; Xu, Jin ; Sun, Zhaolong

MAGNET ARRANGEMENT OF LINEAR PM VERNIER MACHINE................................................................... 3642Imada, Takayuki ; Shimomura, Shoji

A NEW MODULAR AND COMPLEMENTARY DOUBLE-SIDED LINEAR FLUX-SWITCHING PERMANENT MAGNET MOTOR WITH YOKELESS SECONDARY .................................................................. 3648

Cao, Ruiwu ; Huang, Wenxin ; Cheng, Ming

DYNAMIC MEC MODELING OF A LINEAR TUBULAR PM MACHINE ........................................................... 3653Zouaghi, Mohamed Wael ; Souissi, Amal ; Abdennadher, Imen ; Masmoudi, Ahmed

Author Index