2013 Co-Op Report Preparation Guide(2)

8/13/2019 2013 Co-Op Report Preparation Guide(2)

1/15

CO-OP REPORT PREPARATION GUIDE

Approved by the Committee for Cooperative Education on July 2013

Version 1.1

Updated June 2013


2/15

Co-op Report Preparation Guide

Version 1.1 (updated June 2013) Department of Engineering Page 2of 15

[COMPANY NAME]

[Your name]

[ID number]

A report submitted to the

Department of Engineering

UCSI University

[Date]

Company

Logo

Here

KAC

1052COOPER

ATIVEPLACE

MENTREPORT

Edit your coop course code here.

Example, if you are a Chemical

Engineering student taking coop 2,

then your code should be KAC 1052.

Front page

sample


3/15



1. IntroductionCo-operative education (co-op) is one of the requirements in obtaining an engineering bachelors

degree. Co-op is sometimes known as internship or industrial training. The main objective of this

program is to provide the students with vast exposure to a real industrial environment. In addition,students should also be able to apply the skills that they have gained throughout their academic years.

The co-op program also serves a purpose of a shared social obligation for both the UCSI and the

organizations involved. The students will generally assist the companies in handling any related jobs

and tasks assigned to them. In essence, this program will also indirectly enable UCSI in identifying

the industries current needs, hence improving any weaknesses discovered. Upon completing the co -

op program, the students are required to submit a report detailing their experience and summarizing

their activities at the organizations.

The submission of your Cooperative Education Report (Co-op Report)is one of the last steps in theprogram leading to the completion of your engineering degree. The report is a professional statement

of the results of the students internship work. The School of Engineering has established guidelines

for uniformity in the format of the manuscript. These guidelines were designed to ensure that all

papers were high in quality and consistent in the arrangement of the contents.

The Co-op Report must be a professionally finished work in format, style, spelling and appearance, as

the finished document reflects on both the student and the University. The format of the manuscript

should be consistent with the guidelines presented herein. Failure to follow these instructions may

result in either total rejection of your Co-op Report or complete revision of your report. Co-op Report

is a report that you should prepare upon completion of your co-operative studies. The report should

highlight the profile of the company that you are attached with and the nature of tasks and jobsassigned to you while you were in the company.

The report should be written individually and submitted to your respective Head of Department

(HOD) upon completion of your internship. It is not necessary for the student to submit the

hardcover of the report, unless it is specifically requested by the HOD. Nevertheless, the students are

expected to submit the comb-bind of the report and submit it to school in the stipulated deadline.


4/15



2. Report LayoutYour report is divided into three components:

(a) front matters;(b)body; and(c) end matters.

The front matters section consists of materials that cover your report. The sequence of your front

matter section consists of, in the following order:

i. Cover Pageii. Title Pageiii. Approval Pageiv.

Declarationv. Acknowledgement

vi. Executive Summaryvii. Table of Contentsviii. List of Figuresix. List of Tables, andx. List of Abbreviations

(You are still required to have a page for vii and viii even if you do not have any tables or figures)

The body of your report consists of the chapters, and they are namely:

xi. Chapter 1Introductionxii. Chapter 2Company Profilexiii. Chapter 3Tasks, Duties and Responsibilitiesxiv. Chapter 4Conclusion and Recommendations

The end matters section consists of the following items, in order:

xv.

Appendices


5/15



The overall structure of the report is further outlined as follows:

# Item (in order) Description

(a) Front cover The front cover of your report should be printed on colored paper. Each

course has its own color, and the colors are as follows:

Colour Description Program

Red Mechatronics Engineering

Orange Petroleum Engineering

Blue Mechanical Engineering

Yellow Chemical Engineering

Pink Civil Engineering

Purple Electrical and Electronics (EE)

Grey Communication and Electronics (CE)

Naturally, this is the first page in your report, but you do not have toshow the page number.(All logbooksacross every department is colored GREEN)

(b) Title Page This page intends to describe the purpose of the submission of your

report. It simple states that the report is submitted as a partialrequirement for the completion of your degree.

The title page is the second page in your report. Hence, it must benumbered as ii.

(c) Approval Page This page describes that the company supervisor has approved the

content and materials pertaining to company information that ispresented in your report. All reports should be verified first by your

company before submitting to the school.

This page is the third page in your report. Hence, it must be numberedas iii.

(d) Declaration In this page, students must declare that their work is original, and whereinformation, diagram or texts other than the students own work is

included in the report, it should be formally cited.

This page is the fifth page in your report. Hence, it must be numbered

as iv.

(e) Acknowledgement In this section, students could acknowledge, dedicate and thank theirparents, company supervisor along with those who have helped themthroughout the co-op period.

This page is the sixth page in your report. Hence, it must be numberedas v.


6/15



(f) Executive Summary Normally a technical report contains an Executive Summary, while a

scientific report contains an Abstract. As the name suggests, theexecutive summary should summarize the whole report in less than 400words.

Please ensure that your Executive Summary is concise, clear and

contains no grammatical errors.

Keep the summary concise (preferably one page), and write it in one

single paragraph. The summary should present the:

purpose of the report scope of the report (inclusive of basic description of tasks) highlights of the conclusion

In writing your summary, do use connecting words (conjunctions) suchas and, therefore, furthermore, first etc.

This page is the seventh page in your report. Hence, it must benumbered as vi.

(g) Table of Contents The Table of Contents listall main sections in your report and any

subsections with headings. Some key points to note:

Ensure that each entry in the table of contents refers to thecorrect page number.

Connect each entry to its page number with a dotted line. Align the page numbers on the right side of your page. Note the use of lowercase Roman numerals (ii, iii, iv) for the

table of contents, list of figures and tables, and summary.

This page is the eighth page in your report. Hence, it must be numbered

as vii.

(h) List of Figures If you use figures or tables in your report, you must list them in thepreliminary pages of your report, immediately after your Table ofContents page.

Each list identifies its components by number, title, and page number.

Do not list any tables or figures that appear in the appendices.

This page follows the page after the Table of Contents and it should

be numbered as viii.

(i) List of Tables This section summarizes the number of tables in your report. Whenpreparing this section, please take note of the ordering, numbering, and

its corresponding page numbers in the body.

This page follows the page after the List of Figures and it should be

numbered as ix.


7/15



(j) List of Abbreviations Throughout your report, you will be using lots of abbreviations such as

UCSI, TQM, HRetc. In order to accommodate your readersunderstanding of your report, please list all abbreviations that you haveused in your report in this section. Arrange it in alphabetical orders.

Please also ensure that all abbreviations appear in your report.

This page follows the page after the List of Abbreviations and itshould be numbered as x.

(k) Body There should only be four chapters in your report. The chapters are:

Chapter 1 : Introduction Chapter 2 : Company Profile Chapter 3 : Tasks, Duties and Responsibilities Chapter 4 : Conclusion and Recommendations

The page number for the chapters should be written in normalnumbering from 1, 2, 3 ... etc. The maximumacceptable number of

pages for chapters is 40.

(l) Appendices Where applicable, you may have the appendix section. The appendix

serves as an attachment where the students can append either largedocuments, figures, tables or others which may not fit in the body ofthe report.

The materials presented in the appendix section must be discussed inthe report. Irrelevant materials placed in the appendix section for the

purpose of thickening the report should be avoided.

Please note that students are required to obtain permission from the

company supervisor prior to attaching sensitive documents in theirreports.


8/15



3. What should be in the report?Your report is limited to four chapters so as to avoid verbosity and promoting conciseness. The

following are the breakdown and structure of the chapters that should be included in the report:

Chapter 1 : Introductiono The introduction is always the first section in the body of your report. It presents your work

and defines the problem or project. It should supply enough background information to help

the reader understand why your report was written and how it relates to similar work.

o Your objectives should be written clearly and concisely. However, the introduction shoulddeliver a sufficient impact to encourage continued reading.

o The introduction section should describe the rationale, objectives, scope and limitation,significance, and importance of internship or co-op studies.

o The structure in preparing Chapter 1 is as follows:1.0 Rationale

In this section, you should describe the rationale behind co-op education. It would be better if you can somehow find the history of co-operative

education. And it would also be better if you can state other universities

throughout the world which also adopt the practice of having a co-op during

academic studies at tertiary institution.

Abundance of the resources on this subject is available on the internet. But besure not to plagiarize your work.

1.1 Objectives State the objective of co-op. Limit your objective to three objectives. Begin your objective with the word To.

1.2 Scope and Limitations In this section, you are to tell the scope of your co-op i.e. where are you doing

your co-op? What is the company name?

In the limitation section, you should state on where the location of company andthe nature of work. For example, you limit your co-op within the vicinity of

Kuala Lumpur.

1.3 Significance

State the significance of your co-op. In what way have the co-op benefits you?What have you gain by doing your co-op? What rewards are offered to you?

Personal satisfaction? Or monetary satisfaction?

You must also discuss how co-op is important in complementing the theoreticalnature of academic studies. That is, you must also state that co-op is important


9/15



because it uses and applies the knowledge that you have learnt in your academic

studies and put them into practice.

You should also mention how co-op is important in producing a skilled andwell-rounded engineers-to-be.

Chapter 2 : Company Profileo This section should describe the company that you are attached with. The information about

the company can be obtained from the website, however, it is to be noted that sensitive and

confidential information may not be included in your report. It is your duty to obtain

permission and approval from the management of the company prior to inserting the

information in the report.

o Organize your Chapter 2 as follows:

2.0 Company Background State the background and brief history of the company. This information can

usually be found on companys website.

State who founded the company and write a brief biographical sketch of thecompanys founder.

2.1 Location of the company

State the location and address of the company. Include a map showing the direction of the company (not Google map please,

but a readable map)

If the company has a worldwide office, then include them in your report.2.2 Motto, Vision and Mission

If the company that you are attached with has a motto or memorable tagline,then include that in your report.

Include the vision and mission of the company.2.3 Organization Chart

State the organization chart of the company. Your organization chart must portray key individual of the company i.e.

President or Managing Director etc. Usually, this information can be obtained

from the Human Resource Department.

2.4 Main Products and Services

State the main product of the company. State the services in which the company provides.


10/15



Chapter 3 : Tasks Assigned and Completedo This section should describe the nature of job and tasks assigned to you while you are having

your internship in the company.

o You should also include the Gantt chart showing your progress and activities done andcompleted while you were attached with the company.

o You may also include the projects that you were handling in the company in this section.o The project that you handled during your co-op session may be categorized into a group, for

example administrative work or mechanical work or electrical work. In showing the

graphical representation of the nature of task assigned to you, you may use a pie-chart, as

shown in the figure below.

o In your report, you should describe at least four (4) major tasks and duties that have beenassigned to you. Furthermore, you should also describe your accomplishments (such as skills

gained during your co-op).

o In addition to describing the tasks and duties assigned, you should also discuss at least three(3) problems identified during your co-op and the solutions that you have taken to remedy

the given problems. If possible, all identified problems should be accompanied by relevant

pictures or diagrams.

o Organize your Chapter 3 as follows:3.0 Roles and Responsibilities

Describe the role and the department that has been assigned to you. Forexample, you may be an intern at the company, but what role do you play in the

company? Which department(s) were you attached with?

What expectations does the company have on you?


11/15



3.1 Tasks Assigned & Completed

State the nature and significance of the tasks/projects is it more towardschemical, petroleum, electrical or mechanical or programming?

Describe the nature of each task/project assigned: the process, policies,regulations and the procedures.

Represent the nature of tasks assigned graphically. You may use either pie-chartof Gantt chart, showing the progress of your co-op.

You should also describe in detail at least four (4) major tasks and duties thathave been assigned to you.

When describing the tasks that you have completed, include the following: Description of the task that you have completed. Relevant pictures showing the project that you have successfully

completed.

Relevant diagrams. For example, the wiring diagram, or the mechanicaldesign of the project and so on and so forth.

3.2 Identification of Problems and Solutions

Describe the relevant problems that you encountered during your co-op. Forexample, the problems could be a machine or equipment faulty.

Furthermore, you should not only state the problems, but you should alsopropose solutions to remedy and rectify the problems.

A minimum of three (3) problems should be identified, along with its solutions.3.3 Safety & Health awareness

Describe three (3) key points of the safety rules and regulations of thecompany.

Discuss two (2) issues encountered and/or observed, and provide yourrecommendations or suggestions regarding the problem.

Chapter 4 : Conclusion and Future Recommendationo Conclusions and recommendations are very important to your report, and these sections

sometimes cause confusion. A simple rule is to place any statements that you can derive

from the main bodys investigation in the conclusions section of your report.

o Include in the recommendations any comments that you feel might assist in future activities.These future activities are probably not your responsibility and you should attempt to give

the reader the benefit of your experience from working on the problem.

o Just like the summary, conclusions should be brief (preferably one page), but complete andunderstandable. You may use lists, but easy-to-read sentences are best. Each paragraph

should deal with only one aspect of the study.

o Conclusions may only be drawn if they are supported fully by the analyses described in thebody of your report. Three or more conclusions are expected. In this section, you should


12/15



conclude your report by stating the knowledge or skills gained during your attachment with

the company.

o Try to write your conclusions in positive manner so as to avoid harsh language.o Recommendations should be organized in the same manner as conclusions and should follow

them on a separate page. Recommendations are essentially speculative, but they shouldfollow logically from your conclusions.

o Recommendations should be specific, measurable, and attainable. Two or morerecommendations are expected.

o You should also include further suggestion and recommendation to the company that youwere attached with.

o You may also include suggestion to the university in regards to co-op.o Organize your Chapter 4 as follows:

4.0 Conclusion

Conclude your report by stating your major accomplishments.

4.1 Recommendations

State a minimum of five (5) relevant recommendations that could be made tovarious parties i.e. the university, future candidates and/or the company. You

may choose to provide recommendations to any or all parties mentioned.

Please write your recommendation in the most diplomatic manner. Do not useabusive language in recommending a suggestion.

For university recommendation, it must be relevant to the universitys policy.

Appendiceso Appendices may be included if necessary and relevant to the point of discussion. However, it

is to be noted that should the students wish to include sensitive and confidential information

such technical drawing of a product, quotation of materials or other information that is

deemed to be confidential; then the students are required to obtain prior permission and

approval from the management of the company that the student is attached with.

o Not all reports have or need an appendix. Appendices can be considered stand-alonedocuments, and thus could have their own table of contents. The appendix should contain

any information that substantiates the report, but that is not required for a comprehensive

understanding of your work. The appendix may contain bulky data such as lengthy tables,

computer printouts, descriptions of processes or operations, analytical procedures, or maps.Assign consecutive letters or numbers along with names to each, for example: "Appendix A -

- Detailed Street Calculations," "Appendix B -- Bearing Plate Calculations," or "Appendix 1

-- Site Maps."


13/15



4. FormattingThe following formatting should be used when writing your report:

4.1Font typeStudents are advised to use professional fonts for their report. To make it standard for the whole

school, all students are to use the font Times New Roman for the body of the report. The main

heading will be Arial Rounded MT Bold.

4.2Font sizeThe size of the font should be reasonable so that your report can be read easily. Typically, for

your report, the size of the heading should be 13 and the size of your text should be 12.

4.3Justification and HyphenationThe text in your report should be aligned so as to improve the appearance and legibility of thetext. Justify your text.

4.4PaginationAll pages should be numbered, with the exception of the front cover. Use lowercase Roman

numerals for pages other than the chapters and use Arabic numerals (e.g. 1, 2, ) for pages that

are in the chapter.

The page numbers that are displayed must be aligned to the left at the bottom of each page, within

the bottom margin. It is to be noted that no words, punctuation, or diacritics of any kind

accompany the page number. Your page number should be 4, not -4- or 4. or Page 4.

The body of the report should be less than twenty-five (25) pages, excluding front and back

matters. The restriction on length should not be thought to minimize the importance of the report;

rather it is to encourage conciseness of expression and selective presentation of results.

4.5Line SpacingLine spacing is essential in making the text in your report to be readable as well as legible. In

your report, use double spacing throughout except in footnotes, indented quotations set off from

the text, bibliography entries of more than one line, and materials such as captions or tables and

appendices of data.

4.6Style of Writing Person

The report should be written in the third person point of view rather than the first or second

person. Avoid using the phrase I or you in your report. The following table provides an

example:


14/15



Correct Incorrect

The reader will observe that I found thatFigure 3 shows that You will note that

Shortened ExpressionContractions such as didnt, cantand wasnt are considered as informal English while

complete constructions such as did not, could not and was not are characteristics of

formal English. Students should also be careful with the use of inappropriate English words

such as awesome, so, etc. Marks may be deducted in grammar for the use of these

abbreviations and improper English for report writing.

Furthermore, clipped words such as gym, exams, lab and so forth are highly

discouraged in writing a co-op report.

CapitalizationThe rule of thumb is to capitalize the first word in the title and proper nouns.

NumbersWhen numbers are used, they normally appear in Arabic numerals. As a general rule of

thumb, consider the following guidelines:

o Numbers below ten are written in words.o Number ten and above appear as Arabic numerals.o Fractions or decimal values are written as numerals.o Numbers which begin a sentence must be spelled out when use in the text.

4.7FinishingAll reports that are submitted to the departments need to be fully bound by using a comb-bound.

The students must also attach a plastic cover on both sides of the report. The report must be

bound by using the prescribed colors in accordance with your department for ease of

identification.

5. Using Units, Abbreviations, Numbers and Symbols5.1Units

1. All units must be expressed in SI systems.2. The number and the unit must be separated by a space. For example, we write 4 cm, not 4cm.3. The unit is to be written after a number, and it should be abbreviated.4. There is no period after a unit except if it ends the sentence.5. The units are never written in plural form. For example, we write 4 cm, not 4 cms.


15/15



5.2Abbreviations1. In a graph or table, use abbreviations where possible. For example, write January as Jan.2. Abbreviated names are separated by a space. For instance, we write Graham Edward Fuller as

G.E. Fuller not G.E.Fuller.

3. Abbreviations other than names are written in capital letters and not separated by periods. Forexample, we abbreviate United Nations as UN, not U.N.

5.2Numbers1. Usually, we write percentage in words. For example, we normally write 15 percent. However,

where needed, we can also use the percent symbol %. However, the use of the percent symbol

must be consistent in your writings.

2. A zero must preceeded before a decimal point. For example, we write 0.1 but not .1.3. A four digit numbers are written close to one another and not separated by a space. For

instance, the correct form is 9999 not 9 999. However, numbers that are more than four digits

are separated by a space. For example, we write ten thousand as 10 000, not 10000.4. A date is written without a comma and we usually write it as 15 February 1987.5. The range of year is written in the following manner: 18911920.

5.3Chemical Units1. Follow the IUPAC for writing chemical symbols.2. The names of chemical elements are usually spelt out in full. For example, we say hydrogen

gas, not H2gas.

3. Chemical bonds can be written by using a dash. For example, CH 3-CO-CI.4. Ionic elements or compounds can be written as Cu2+ not Cu++.

5.4Engineering Symbols1. SI units are highly encouraged to be used, however, other units are also allowed. The key is

to be consistent in using your units throughout your report.

2. All equations must be numbered, and the numbering follows the chapter number.3. Use lowercase letter for common words, but use uppercase latter for specific names. For

instance, we write Ohms law but not Ohms Law.

Documents

2013 Co-Op Report Preparation Guide(2)