2010 Product Guide

Ph. 866.966.2538/360.966.2538Email - [email protected]

2010 Product Guide

Fixed 3-Point adaPter

The EZ-3 Point Adaptors were originally created in 2000 to solve a dilemma. Skid Steer Attachments are so expensive, yet many agricultural implements cost a lot less. By creating an adaptor between the Skid Steer and implement, everyone gets to save some money. Our early versions worked well but were very difficult to use and in fact are similar to what our competitors are now copying. The early versions did not allow you to connect the implement from inside the cab. This made for a lot of in & out of the cab jockeying while you would try to adjust the hitch points.

The current version uses an attachment method that allows you to connect the lower links from inside your cab. The link arms are adjustable from Cat 0 - 2 dimensions. The links can be ordered in Cat 1 or 2 sizes. Everything is adjustable and replaceable if you should break a part. This is not a throw away item like so many competitors models. You will have this attachment for decades of use and never worry that it won’t quite attach to a certain implement. It is also upgradeable to a motorized version should your needs change. There simply is no better solution available anywhere. We have thought out every conceivable variable when it comes down to this prod-uct. You cannot buy anything even close to this product for the price shown. Most of the simpler versions do not compare to our features and have no where near the quality.

Your Online Source for Skid Steer Attachments!

Phone: 866.966.2538/360.966.2538Fax: 360.966.7118Email: [email protected]

Features:• Universal Skid Steer Quick Attach Plate• Adjustable Lift Arms - Category 0 - 2• Quick Hitches - Choose Cat 1 or 2• Adjustable Top Link Cat 1 - 2• Quick Hitch Design• Reese Adaptor for Trailer Applications Included.• Completely Rebuildable & Upgradeable• Black Hammerite Powder Coat Finish• Weight - 195 lbs.

• Scoops• Blades• Plows• Disks• Chain Harrows• Culti-packers

• Wagons• Drags• Boom Poles• Box Blades• Spreaders• Sprayers

Easily Attaches to These Implements:

Motorized 3 point pto

The EZ-PTO-80 is ideal for skid steer loaders with anauxiliary hydraulic output of 10 GPM to 17 GPM @ 3000 PSI. It will provide up to 21 HP at maximum flow and pressure.

Now you can run many powered agricultural attachments on your skid steer with very little or no modification needed at all. The EZ-3-Point PTO is an upgraded EZ-3-Point with special hitch arms, a rotating motor mount, motor, bypass valving and all the hosing you need to turn your skid steer into a trac-tor capable of attaching 3-point attachments from Category 0 - 2.

This attachment is amazing and only available from Skid Steer Solutions. Why, because we designed it and only we sell it. It is a quick hitch design that mounts easily to the front of your skid steer just like a bucket would. The only difference is that this attachment mimics a 3-Point similar to those found on tractors.

Imagine being able to run a Brush Hog, Roto-Tiller, Snow Blower, Cement Mixer, Chipper, Rake, Box Blade, Bale Spear, Manure Forks, Scoop or what have you on your skid steer? Think of the money you will save by being able to use inexpensive agricultural attachments on your skid steer.

Yes, these attachments have been field tested and they work with little effort on your part. We know of two competitors that make a similar product but there are huge differences. Our motors are now custom made to our specifications. This means the motor is designed for this application and not an off the shelf “might work” design. Our mounting system is unique and allows for infinite adjustments between Cat 0 - Cat 2. You would not believe how handy this is when things don’t quite fit other hitch designs. It will always fit ours. Our unique motor alignment design gives the operator the best adjustment angle so the PTO shaft runs flat and true, thus saving horsepower and prolonging your PTO shaft life.



Specifications:• Universal Skid Steer Quick Attach Plate.• Quick Hitches - Choose Cat 1 or 2.• Adjustable Top Link , Motor Angle and Lift Arms. • Pressure Rating - 2200 PSI - 3000 PSI. • Hoses - 4,000 PSI Rated. • 1-3/8” - 6 Spline PTO Shaft. • Couplers - 1/2” SAE Flat Faced. • Weight - 425 lbs. LF and 510 HF.

• Fully Re-buildable and upgradeable design.• Horsepower ratings shown below are actual measured

and not calculated with unsustainable formulas.• PTO-80 rated 10 - 17 GPM - 21HP Peak.• PTO-125 rated 17 - 22 GPM - 27HP Peak. • PTO-160 rated 21 - 25 GPM - 31HP Peak.• PTO-200 rated 31 - 40 GPM - 54HP Peak.• Nominal Rotational Speed - 540 RPM

Skid Steer 4-way dozer Blade

Industry leading processes and an eye for quality have made our dozer blades the industry standard for which all others are judged. Many of our competitors use our blades as a comparison point for discussion and here is why. Take a close look at our dozers and you will see a resemblance to real full bull dozer blades. This has been modeled because the machines are becoming so large and powerful that you need a real blade to perform real work. Many of the cheaper blades use a thin mold board with angle iron for structural integrity. This method is insane! It is a carryover from a snow blade. Works well in the snow, but it just will not hold up in the dirt.

Our mold boards are heavier and are drilled for a replaceable universal cutting edge. That is only the start. The back is then enclosed with a tubular structure to give it structural integrity. The blade cannot possibly twist when doing heavy work. These blades are strong enough to be used on the heaviest of machines. Yes you can use this blade on an ASV PT100 with 115 HP and the combination will perform just like a small bull dozer. Dual push/pull hydraulic cylinders are standard so that all force is being exerted evenly on the frame thus keeping any twist to a minimum. Large pivot points and pins are the norm. Absolutely nothing is left to chance on these dozers. We know people earn a living with our products and we never want to see them with down time due to attachment failure.

Another nice feature is our large adjustable drag shoes that keeps the blade from cutting into the ground to harshly. This lets even the least experienced operator run this dozer like a pro. For smaller skid steers, it is recommended that you add a set of over the tire tracks for more machine stability and pushing power. This product is covered by a 1 year manufacturers warranty against manufacturing defects.



Features:• Fullfour-wayhydraulicpowerwith30degreesanglebothleftandrightforworkingbothsidesandinconfinedareas.• Heavy duty rectangular tube frame construction for strength and exceptional durability.• Replaceable cutting edges are Universal Grader Bits which ensure replacement availability.• Adjustable extra wide, high abrasion resistant skid shoes.• 3,000 pound (PSI) welded cylinders.• Multiple sizes available including 60”, 72”, 84” and 96” widths.• Mounts close to the loader arms for additional control• Weight: 60” - 535 lbs.,72” - 550lbs., 84” - 870 lbs., 96” - 1250 lbs.

Skid Steer 6-way dozer Blade

Industry leading processes and an eye for quality have made our dozer blades the industry standard for which all others are judged. Many of our competitors use our blades as a comparison point for discussion and here is why. Take a close look at our dozers and you will see a resemblance to real full bull dozer blades. This has been modeled because the machines are becoming so large and powerful that you need a real blade to perform real work. Many of the cheaper blades use a thin mold board with angle iron for structural integrity. This method is insane! It is a carryover from a snow blade. Works well in the snow, but it just will not hold up in the dirt.

Our mold boards are heavier and are drilled for a replaceable universal cutting edge. That is only the start. The back is then enclosed with a tubular structure to give it structural integrity. The blade cannot possibly twist when doing heavy work. These blades are strong enough to be used on the heaviest of machines. Yes you can use this blade on an ASV PT100 with 115 HP and the combination will perform just like a small bull dozer. Dual push/pull hydraulic cylinders are standard so that all force is being exerted evenly on the frame thus keeping any twist to a minimum. Large pivot points and pins are the norm. Absolutely nothing is left to chance on these dozers. Another nice feature is our large adjustable drag shoes that keeps the blade from cutting into the ground to harshly. This lets even the least experienced operator run this dozer like a pro. The 6-way pivot point is reinforced with extra tubing and fan structures to distribute the weight and allow total control when the blade is tipped. The solonoid control and wiring harnes is included as well as an option for plug and play for most skid steer loaders.

For smaller skid steers, it is recommended that you add a set of over the tire tracks for more machine stability and pushing power. This product is covered by a 1 year manufacturers warranty against manufacturing defects.



Features:• Full six-way hydraulic power with 18 degrees tilt both left and right and 30 degrees angle for working both sides and in

confinedareas.• Heavy duty rectangular tube frame construction for strength and exceptional durability.• Replaceable cutting edges are adjustable and universally available.• Adjustable oversized skid shoes.• 3,000 pound (PSI) welded cylinders.• Multiple sizes available in widths from 72”, 84” and 96”.• Weight: 72” - 870 lbs., 84” - 1220 lbs., 96” - 1470 lbs..

E60 BackhoE SyStEm

The E60 Series Backhoe with ECS. ECS is an exclusive Exchange Coupler System developed specifically for small backhoes that allows the operator to change out buckets and accessories in seconds. The main pin contains a deep pin journal that holds 2 ounces of grease. This insures full pin coverage of grease and a nice clean, lubricated operating surface. Over-pres-sure circuit provides safety for the boom and your machine to insure you do not exert too much force on your components. Add your own attachments with our blank bolt on mounting ears. Fish plated pin points keep wear and stretching to a mini-mum in the high stress areas.



Features: • Light Weight and Powerful.• 6-1/2” Reach with a 6” Digging Depth.• 12” Stroke x 3” Bore• Engineered and Proven CNC Formed Back Plate

Mounting System with Slots for Universal Machines and Smaller Compact Skid Steer Loaders.

• CNC Machined Pin Boss with Press fit Replaceable Bushings.

• Main Pin is 1-1/2” thick, Made from 4140 Machined and Polished Pin Stock.

• Run one of our buckets sized 8”, 12”, 16”, 22” or 32”. Change between buckets in seconds.

• Other attachments include a Ripper, Fixed Thumb and 5” Articulated Jib Boom.

• Add your own attachments with our blank bolt on mounting ears.

E70 BackhoE SyStEm

eTerra E70 Backhoe:How did the best backhoe on the market get better?The addition of a hydraulic thumb has changed the way people use this device. With a regular fixed backhoe you are stuck digging in one place. The E70 allows you to dig and move from place to place. Pick up debris and move it on the fly. The E70 Skid Steer Backhoe also uses our special quick change coupler that allows you to change buckets in sec-onds. This is a huge step forward in the skid steer backhoe market. All of our imitators are years behind us copying only our easier older designs. The E70 Skidsteer backhoe is un-like anything else you will find on the market today and we are very proud to have brought this to market. Hydraulics:Main Bucket Sweep - 3” Bore and 12” Stroke e/w adjustable pressure relief (Protects your boom and pins from damage)Thumb - 2” Bore x 12” Stroke. Remote Hydraulic connec-tions available on Xtreme models.

Hydraulic Controls:Single 2 Port in, 4 port out electric over hydraulic industrial fluid control solenoid. Rated to 25 GPM and 4000 PSI

Wiring:Generic Kit - This kit is supplied if you do not have your own electrical controls on your skid steer. It features a commeri-cal grade switch kit that mounts on your left control stick and back to your battery. There is an extension wire furnished that runs out your boom to where your hydraulic controls connect. When you mount your backhoe, you connect our hoses and the wire end connector and you are ready to go. You would operate your right thumb control on your machine to open and close the bucket. You push the switch in and then operate your right thumb control to open and close the thumb.

14 Pin and 8 Pin Kit - If your machine has an auxilliary wiring kit installed, we can furnish an adaptor plug that will allow you to plug the backhoe right into your factory controls.



Features:• Overall Reach - 7’6”.• Digging Depth - 7”.• Grip Size - 28”.• Universal Interchangeable Coupler.• Electric over Hydraulics Control for bucket and thumb

actuation.• Break-out Power 14,500 lbs.• Hydraulic Cylinders - Bucket 3” x 12” - Thumb 2” x 12”.

• Fits all universal style skid steer quick connects includ-ing Case 1800 series.

• Connects to all ECS series buckets, rippers and mini booms.

• Weight - 540 lbs. with 12” bucket.

Bradco 509 Backhoe

The Bradco 509 Series Backhoe is the result of over 35 years of building compact attachments that meet the requirements of all industries. Their productivity and reliability are un-matched in the industry.

Using the optional frame mount kits, the 509 can be easily attached to most skid steer loaders with a lift capacity of 1500 lbs. of more with a pressure rating up to 3000 psi. Regular flow hydraulics are all that is needed to power the backhoe. System relief pressure is preset at 2500 psi. Once attached, the operator would then operate the backhoe from outside the cab of his machine in the supplied seat with the mounted controls. The 509 features hydraulically adjustable arms that stabilize the machine and keep the backhoe from creeping forward into the digging area. The 509 is heavy enough for most jobs requiring this type of backhoe.

The 509 is backed by a special 2 year warranty program.

Transport Height - 7’ 9”Transport Width - 5’ 0”Ground Clearance - 11”Length (overall) - 7’ 7”Boom Pivot Height - 16”Operating Weight with 12” bucket - 1,425 lbsDigging Depth (maximum) - 9’ 8”Digging Depth 2ft Flat Bottom - 9’ 7”Dig Depth 8ft Flat Bottom - 8’ 3”Operating Height (fully raised) - 12’ 10”Loading Height - 6’ 10”Loading Reach - 4’ 2”Reach from Swing Post - 12’ 9”Bucket Rotation - 180 degreesSwing Arc - 180 degreesStraight Wall Digging Depth - 7’ 3”Stabilizer Spread Operating Position - 7’ 11”Stabilizer Down Below Grade - 16” Digging Force (bucket cylinder) - 5,675 lbs



Bucket Size Cap cu/ft Heaped Capacity Weight # of Teeth12Ó 1.43 1.83 140 lbs. 316Ó 1.98 2.56 154 lbs. 418Ó 2.25 2.98 162 lbs. 420Ó 2.52 3.40 168 lbs. 424Ó 3.07 4.32 185 lbs. 434Ó 4.23 5.80 238 lbs. 736Ó 4.48 6.14 257 lbs. 7

Bradco 511 Backhoe

The Bradco 511 Series Backhoe is ideal for farming, light construction and landscaping for uses that include colf cours-es, nurseries, utility companies and cemeteries. All Bradco Backhoes are versatile, powerful, and reliable.

Using the optional frame mount kits, the 511 can be easily attached to most skid steer loaders with a lift capacity of 1750 lbs. of more with a pressure rating up to 3000 psi. Regular flow hydraulics are all that is needed to power the backhoe. System relief pressure is preset at 2500 psi. Once attached, the operator would then operate the backhoe from outside the cab of his machine in the supplied seat with the mounted controls. The 511 features hydraulically adjustable arms that stabilize the machine and keep the backhoe from creeping forward into the digging area. The 511 is heavy enough for most jobs requiring this type of backhoe.

The 511 is backed by a special 2 year warranty program.

Transport Height - 8’ 10” Transport Width - 5’ 0”Ground Clearance - 11”Length (overall) - 7’ 9”Boom Pivot Height - 16”Operating Weight with 12” bucket - 1,594 lbsDigging Depth (maximum) - 11’ 1”Digging Depth 2ft Flat Bottom - 11’ 2”Dig Depth 8ft Flat Bottom Op Height (fully raised) - 9’ 11”Operating Height (fully raised) - 14’ 5”Loading Height - 8’ 0”Loading Reach - 5’ 0”Reach from Swing Post - 14’ 5”Bucket Rotation - 180 degreesSwing Arc - 180 degreesStraight Wall Digging Depth - 8’ 2”Stabilizer Spread Operating Position - 7’ 11”Stabilizer Down Below Grade - 16” Digging Force (bucket cylinder) - 5,676 lbs



Specifications for Buckets:Size Cap Cu. ft. Heaped Cap Weight # of Teeth 12” 1.43 1.83 140 lbs 3 16” 1.98 2.56 154 lbs 4 18” 2.25 2.98 162 lbs 4 20” 2.52 3.40 168 lbs 4 24” 3.07 4.32 185 lbs 4 34” 4.23 5.80 238 lbs 736” 4.48 6.14 257 lbs 7

BH-28 & BH-96 Bale Handlers

BH-28 - Designed for bales sized from 28” - 80”, the BH-28 is a commercial duty bale handler de-signed with the user in mind. It provides the user with great visibility along with awesome strength so your gripping ability is firm and non-slipping.

Ideal for 1000 lb. silage bales with a maximum load of 2400 lbs., the BH-28 is built for work.

It also features a constant pressure hydraulic design which is meant to allow the operator the ability to grip the bale at a certain pressure and maintain that pressure while moving. This gives you the assurance that you will not drop the bale due to pressure reverse leakages.



Specifications: BH-28• Height - 47.25”.• Width - 37”.• Depth - 54”.• Hydraulics Cylinder rated to 3000 psi.• Capacity - Up to 2400 lbs. depending on the lift rating of

your skid steer.• Capacity 28” - 80” Round or Square Bales.• Weight - 500 lbs.

BH-96 - Designed for round and square bales sized from 48 - 96”. It has smooth surfaces so that you can handle wrapped bales without fear of tearing the wrap. It allows large bales to be moved and/or stacked quickly and efficiently.

Careful attention to design provides smooth, curved surfaces, which contact the bale firmly and pro-vide protection from punctures. Wrapped bales are handled best from the ends (where the plastic is thickest), but with care may be handled from other directions. The Bale Handler comes standard with a Universal Skid Steer mounting plate, cylinder, and powder painted black. We always include hoses and Flat Face universal dripless couplers.

Specifications: BH-96• Height - 24”.• Width - 48”.• Depth - 36”.• Hydraulics Cylinder rated to 3000 psi• Capacity - Up to 2300 lbs. depending on the lift rating

of your skid steer.• Capacity 48” - 96” Round or Square Bales.• Weight - 475 lbs.

Sweep-eX BroomS

Our solution to sweeping is simple, yet very effective. Sweep-Ex brooms are built for the type of heavy duty applications that skid steer loaders demand. But, they are just so simple, they can be used for more than just sweeping. The heavy bristle design does a bang-up job of sweeping construction sites with minimal dusting. Landscapers love these brooms for spreading bark mulch and then sweeping any overages off the the side walks. People love to use them for sweeping fresh snow off of driveways.

These brooms are built with a lot of bristles and mounted to a heavy steel frame that can withstand the roughest use. It is so tough that we even use ours for grading our roads and parking lot. The extremely economical SweepEx modular broom series features a unique brush system that is ideal for all commercial sweeping. This is a fixed broom and not a rotary broom.A fixed broom does have its’ advantages.• They create a lot less dust so they are ideal for enclosed areas.• They are simple to attach with no moving parts to break down.• Minimal dust protects operator and environment.• Easy to replace Polypropylene fixed brush sections.• Power sweeping action at a fraction of the price of a rotary sweeper.• Skidsteer mount with fixed, manual or hydraulic tilt available.

This is a very versatile and high quality broom. That is why and only why you find it here at Skid Steer Solutions.



Specifications:• Sizes - 60, 72 & 96” available.• Universal Skid Steer Mounting Plate included.• Fixed, manual angle and hydraulic angle versions available.• Bristle frame is made from extruded aluminum to minimize twisting.

Front ColleCtor Brooms

Sweepster SB Hopper Brooms:If you have shopped around for brooms, you will see that Sweepster sets the bar for quality and features. They make some of the best commercial brooms available. They use high quality hydraulics, brushes and drums so the broom will last. These are combined into a proven hopper design that is both simple to use and holds up to the abuses of modern construction.

The SB Collector Brooms are a bi-directional broom that sweeps forward to pick up dirt and reverses for sweeping in tight spaces. It is designed to handle clean-up in construction, municipal and industrial applications. By simply reversing your hy-draulics and tipping the broom forward, you are able to dump out all of the collected materials.

You have your choice of 26” poly or poly/wire mix brushes. My favorite is the nylon/metal mix. It lets you really scrub hard surfaces without the fear of premature wearing of the brushes. The broom will ship with your choice of 100% Poly Bristles or 50/50 Metallic/Poly bristle configuration.

This is the kind of broom that is perfect for dusty areas because the broom is completely enclosed. It is also very useful be-cause the dirt is gathered in the hopper and can easily be dumped.

Unit ships complete with wrapped hoses and Flat Faced Hydraulic couplers.

It comes standard with a 1 year manufacturers warranty against manufacturing defects.



Features: • Fits all Skid Steers e/w Universal Quick Tach Adaptors.• No hydraulic line breakage when changing core.• Quick change core.• Designed to insure even sweeping and pressure.• Working width of broom 60”, 72” & 84”.• Overall width of broom 66”, 78” & 90”.• Broom diameter - 26”.• GPM Range - 14 - 25 GPM.• Heaped Capacity - 13.9, 16.8 & 19.8 cu ft.

• PSI Range 2000 - 3500.• Replaceable bolt on cutting edge.• High quality hydraulics, hoses and brushes.• Choice of 100% Poly or 50/50 Poly/Metallic Bristles

shipped standard.• Weight - 808 - 1033 lbs.

SweepSter rotary BroomS

Sweepster QC Angle Broom:If you want the best commercial quality broom available, then you have come to the right place. First of all, we use high quality hydraulics, brushes and drums so the broom will last. The tilt mechanism is manual to help keep the cost down and give you fewer parts that could fail. Finally the brushes are large and heavy. Our favorite is the nylon/metal mix. It lets you really scrub hard surfaces without the fear of premature wearing of the brushes. This broom ships with your choice of 100% Poly Bristles or 50/50 Metallic/Poly bristle configuration. With sizes available from 72”, 84” and 96” we are sure to have the size that works best for your application and loader.

Another nice feature is the full floating hitch point. This allows the broom to follow the contour of what you are sweeping. There is nothing worse than sweeping an area and looking back to see the broom came up for a second and left a ton of material behind you. Our broom takes care of that issue. Designed to insure even sweeping and pressure. Fits all Skid Steers e/w Uni-versal Quick Tach Adaptors. No hydraulic line breakage when changing core.

What is included?The rotary broom and skid steer mount along with hoses and flat faced couplers. The broom does not come with the dust hood or hydraulic pivot. You can order these as optional items.



Features: • Fold away stands.• Modular design. Can be upgraded to hydraulic angle

and dual motor system.• Replaceable hex drive system.• Quick change core.• Faceted hood design provides maximum strength at

the ends of the hood where most stree damage occurs.• Manual or Hydraulic angle change from 30 degrees left

to 30 degrees right.

• Working width of broom 72, 84” & 96”.• Broom diameter - 32”.• GPM Range - 12 - 25 GPM.• Manual pivoting base is standard.• High quality hydraulics, hoses and brushes.• Choice of 100% Poly or 50/50 Poly/Metallic Bristles

shipped standard.• Weight - 850 - 1020 lbs.

eTerra Brush rake

eTerra BRH-72 - Brush Rake 72”

The eTerra Series II 72” Brush Rake is based upon our GR Series of grapples. The tines are long and spaced a little wider to allow the user to get in and under the most stubborn brush. The tines are made from 5/8” Thick T1 plate and since there are no moving parts, there is virtually nothing to wear out. The teeth are so long that you will have a hard time wearing them down substantially. The Series II Models have extra tine reinforcement plates as well as a more aggressive forward design.

The Series II takes over where the series l left off. By refining the design, adding material and re-inforcement the Series ll gives you more versatility than ever.

Uses: • Brush Clearing• Scrap Clean-up• Rock Grubbing• Tree Removal

This configuration comes with an integrated backplate. This is the finest Brush Rake we have ever seen and you will think so too. If you can find a nicer Brush Rake for a similar price, BUY IT!



Features:• Height - 34”• Width - 72-5/8”• Tine Depth - 17”• Tine Thickness - 5/8”• Tubing Size - 3”• Weight - 560 lbs.• Mount HD Universal Skid Steer Including Case 1800

Spacing. • Finish - Black Hammerite Powder Coat

Bradco 4-in-1 Buckets

We still cannot believe the amount of steel used in this bucket. The thickness, the grade and the weight. There are so many light duty buckets out there masquerading as extreme buckets, that we needed to make sure the ones that we sell were not like the rest. Most of the buckets available would only be classified as light - medium duty grade when judged directly with Bradco buckets, yet the manufacturers keep calling them Extreme this and “Xtreme” that. If you want a bucket for just a couple of uses and then send it off to the recyclers, then there are plenty of sales possibilities elsewhere. If you want a bucket that will last under the most extreme uses, then you are at the right place.

First of all you have a heavy duty bucket for all of your digging needs. We all know how useful a bucket is now don’t we?Next you have the dozing feature that makes a 4in1 a must for a job site. Open the bucket and you reveal a shallow wedge blade that can be used for pushing dirt and grading without the fear of deep scalping which is so easy to do with a standard dozer blade. Thirdly, you have a grapple for grabbing and crushing material if desired. The fourth most useful thing about a 4in1 is back grading with the clamshell open. These buckets really perform well for you now and years to come.

It is amazing to have one tool that can do so many things at once, but here it is. If you have been in the industry any length of time, then you already know these facts. If you are new to the business, then welcome. This should be one of the first attach-ments that you buy for your new venture.

Ships complete with hoses and 1/2” Flat Faced Couplers and is covered by a 1 year no hassle warranty.



Model Height Length Width Clam Length

Back Blade Length

Clamp Opening

Operating Pressure

Clamping Force

Weight Heaped Capacity

MP72 27.57Ó 38.13Ó 72.75Ó 26.67Ó 12.41Ó 34.79Ó 2250 PSI 4011 lbs. 900 lbs. 19.99 cu/ftMP78 27.57Ó 38.13Ó 78.75Ó 26.67Ó 12.41Ó 34.79Ó 2250 PSI 4011 lbs. 935 lbs. 21.69 cu/ftMP84 27.57Ó 38.13Ó 84.75Ó 26.67Ó 12.41Ó 34.79Ó 2250 PSI 4011 lbs. 975 lbs. 23.40 cu/ft

BXS Low Pro Bucket

In a market place where everyone else is striving to be the cheapest, we are working on being the best. This is the best second bucket you will buy. Second because most people will buy a cheap bucket first and when it disintegrates, they will buy ours. We are skid steer people and we build for our own use. You get to buy it after we have tested and proven it as a top quality product.

What makes our buckets so good?

Top quality materials and the best design. Even more important, we spend time on assembly. We pre-heat dis-similar metals when welding so the weld actually penetrates and holds. The back has a formed beam on the top and an enclosed beam on the bottom. This adds incredible structural integrity to the bucket. The forming on the bottom is curved to keep material from getting hung up in a sharp corner. This helps the bucket clean out better.

Now what really makes this bucket stand out....Dimple Plate. The bottom is dimple plated. This acts like a huge steel honey comb. It is 5 times stronger, but still lighter than using raw steel. It provides lateral stability as well as incredible strength. When you hit a large imbedded rock that stops your machine, the bucket will not distort.

BX buckets are better quality than original equipment manufacturers at a better price and a no hassle warranty. What more could you ask for?



Model Height Depth Width (Overall)

Back Angle

Dimple Plate Steps Side Cutters Cutting Edge

Weight Heaped Capacity

BXS-60 21Ó 30Ó 61.5Ó 70¡ Yes 2 3/8Ó x 3Ó 3/4Ó x 6Ó 407 lbs. 13.88 cu/ftBXS-66 21Ó 33Ó 67.5Ó 70¡ Yes 2 3/8Ó x 3Ó 3/4Ó x 6Ó 476 lbs. 16.80 cu/ftBXS-72 21Ó 33Ó 73.5Ó 70¡ Yes 2 3/8Ó x 3Ó 3/4Ó x 6Ó 505 lbs. 18.33 cu/ftBXS-78 21Ó 33Ó 79.5Ó 70¡ Yes 2 3/8Ó x 3Ó 3/4Ó x 6Ó 525 lbs. 19.85 cu/ft

BXS-84 21Ó 33Ó 85.5Ó 70¡ Yes 2 3/8Ó x 3Ó 3/4Ó x 6Ó 619 lbs. 21.38 cu/ft

Screen-it Bucket

The Screen-it bucket. This is just about the most useful bucket you could ever own. Imagine having a hydraulically powered dirt sifting bucket that keeps the main bucket char-acteristics so you can use it also as a regular bucket when needed. Imagine also a powerful grapple bucket all built on the same frame. Then add in the adjustable rods that enable you to select how large of material you want to pass all the way from 3/4” to a full 5” material...

DO WE HAVE YOUR ATTENTION YET?

Well there is more! While other buckets use mild steel, thisbucket is built from 100% T1 structural steel. Not just thecutting edges or the drag bars, but the whole thing. This con-struction quality and heaviness makes for one tough, longlasting bucket.

The photos should tell the whole story. While other siftingbuckets have a screen built into the base, our screen is ontop. This means the base of the bucket is not compromised

by cutting a big hole in it. The screen can be lifted open andthe bucket looks just like a regular bucket. With the screenclosed, you simply roll it forward and turn on the hydraulicmotor to vibrate the lighter material out of the bucket. Youare then left with the larger material in the bucket base readyto be dumped when and where you need it. It is just that simple. The screening rods are removable and replaceable as needed to allow you to pick your screen size at will without the trouble of changing a main screen. Just simply pull the rods out to size the material.

If you need even more screening ability, you can add a staticscreen and run the bucket directly over the static screen toproduce the nicest topsoil available.

Hydraulic Flat Faced couplers and hoses are included.



Specifications:• Fits all Skid Steers e/w Universal Quick Tach Adaptors.• Sequencing valve gives this bucket 2 functions w/o

needing additional plumbing from your skid steer.• Removable screening bars allow you to set the

screening widths from 3/4” - 2” diameter material.• Operatesonflowratesfrom12GPM-21GPM.• Doesnotrequirehighflow.• Designed to insure even clamping pressure.

• Operates as a grapple, sifting bucket and regular bucket.

• 72” and 84” widths available.• Weight - 72” - 850 lb. - 84” - 950 lbs.

Skeleton Bucket

The eTerra Skeleton Style Rock buckets are an awesome design at a great price. There are a lot of these types of buckets in the market place today. Our design is solid so we figured that if we continued to build them properly, there would still be people around that would want a quality item. Many of our customers realize that if it comes from eTerra, it works and it lasts. We really like this bucket. It does what it is supposed to do and it does it well. Compared to many fancy hydraulic buckets out there, it outperforms them, so really you are saving money with this bucket and still getting a lot done.

What makes our buckets so different?Top quality materials and the best design. Even more impor-tant, we spend time on assembly. This bucket is straight and true. We pre-heat dissimilar metals when welding so the weld actually penetrates and holds. The back, top and bottom use heavy walled tubing and not a piece of angle iron. This adds incredible structural integrity to the bucket. The bucket has just the right amount of material in the right place to make

it work effectively and to make it last. The cutting edge is plasma cut T1 steel while the tines are A50 3/8” material.

The side profile shows a slight ridge that allows the rocks to stay in the bucket and not fall forward and out. The back of the bucket has a depression that gathers and holds material. By tilting your bucket backwards, the material will fall into the back of the bucket and stay there.

We now build these for other manufacturers under their name, so chances are you could be buying our bucket re-gardless of where you buy it from.

These are great for rock picking as well as brush clearing, spreading sawdust and separating grass from dirt.



Specifications:• 66” Number of Tines - 21• Width - 66”• Weight - 624 lbs.

• 72” Number of Tines - 23• Width - 73”• Weight - 686 lbs.

• 80” Number of Tines - 25• Width - 81”• Weight - 732 lbs.

• Height - 21” • Depth - 33”• Tine Spacing - 2-7/8”• Tines - 3/8” Thick• Paint - Hammerite Black Powder Coating

Skid Steer Cab enCloSureS

We are the largest supplier of Cabs on the Internet and with that comes the experience to make sure you get the right cab the first time around. We have two styles that we currently offer.

Acrylic Cab Enclosures:These cabs are our most durable. Although, not a direct replacement for factory cabs, they have many of the features for a fraction of the price. They ship with door handles, hinges and all installation hardware. The side windows are fixed and do not slide open. Features of Acrylic Enclosures includes Low distortion, Clearer than glass, Impact resistant, Abrasion resistant, Will not shatter when impacted.

Our product uses .25” thick Acrylic for the front window and .080” thick acrylic for the sides. This is a premium enclosure that will last and last.

Vinyl Cab Enclosures: The most cost competitive means of keeping you out of the elements. Ships with all required mounting hardware. Doors are steel wire framed with stretched clear vinyl to provide excellent visibility. The main body is a single piece pull over cover with integrated windows and double stitched edging. These covers make a great addition to your skid steer allowing you to keep out of the elements while maintaining great visibility overall.



Available Models - Acrylic:• Caterpillar - 216, 226, 236, 246, 232, 242, 252, 262,

268, 247B, 257B, 277B, 272C• Bobcat - 742B, 743B, F Series - 553, 751, 753, 763,

773, 863, 873, G Series - 553, 751, 753, 763, 773, 863, 873, 963, S175, S185, T190

• John Deere - 240, 250, 260, 270, 280, 317, 320, 332• Case - 75XT, 85XT, 90XT, 95XT, 420, 60XT, 70XT,

LX875, 40XT, L185, 1845C• New Holland - LS140, LS150, LS160, LS170, LS180,

LS190, LX565, LX665, LX885• Gehl - 40 Series - CTL60, 7800, 5635, 5640• ASV - RC-85, RC-100

VInyl Cabs available for most models from Bobcat, Case, New Holland, John Deere, Gehl and Mustang.

Skid STeer Cab HeaTer

Maradyne Cab Heaters - Fits most Skid Steer Loader Cabs

Maradyne liquid fed cab heater that uses your existing cooling system to draw heat and an internal fan to distrbute the collected heat throughout your cab. This method is similar to what you have installed in your truck. It is the most effective way to get a lot of heat out of a small heater. Most of the plug andplay electric models available do not provide enough heat to keep your windows clear. The Maradyne coolant fed heaters do. Our kit price includes the heater and shut-off kit with fittings. We do not supply the hoses or hardware kit to install this unit into your machine.

You need to have some mechanical expertise to do this and we want you to understand that this will take you about 5 hours to install. There is no easy way to do this. You will need an open spot on the floor to mount the heater. You will then have to break into the cooling system and run the lines that you will supply to the sides of the heater. You have to allow for the extra length when you lift the cab up. Once this is done you will be very toasty.

Some customers have found it easier to mount the heaters just behind their seats of above the back of their heads. It is a space matter when it comes to the inside dimensions of your cab and each installation will be different.

Requires plumbing modifications to your cooling circuit and 12 volts wired to the box to operate the fan.



Features:• Dimensions - 6-7/8” H x 6-7/8” W x 7.25” D• 12,500 BTU output• Weight 20lbs.• High Efficiency• Tube and fin water coil has lifetime warranty• Multi-speed fan control• 5 blade aluminum fan blade• Shut-off kit includes clamps, shut-off valve, return cou-

pling and reducers

Mix-N-Place ceMeNt Mixer

Mix-N-Place Skid Steer Mounted Cement Mixer:Put the new Mix-N-Place on your skid-steer and you have both a concrete mixer and a placer, all in one. It is the easily af-fordable way to mix small volumes of concrete and then place it anywhere it is needed. Today, getting less than full truckloads of concrete from a ready-mix company is almost impossible, and if they will deliver it, you can bet the cost will be significantly higher than the normal yardage price. In addition, wheeling concrete is very costly, slow, and labor intensive. With the Mix-N-Place you can mix the quantity you need, have it when you are ready for it, place it where it is needed, and keep the cost low.

Easy to Use:The six cubic foot capacity is perfectly matched for the majority of skid-steer loaders. The Mix-N-Place is simple in design, but is built rugged so it will be dependable. The mixer is powered by a strong hydraulic motor that mounts to an extra heavy duty carrier bearing.

This rugged bearing safely carries the load while protecting the hydraulic motor and seals. A heavy duty universal skid-steer quick-tach along with 3/8” plate mounting components ensures it will stand up on any job, and even withstand the toughest of rental conditions. The Mix-N-Place is supplied complete with hydraulic hoses and quick disconnects. Just connect to your skid-steer’s auxiliary hydraulics and you are ready to Mix-N-Place concrete.

Comes with a 1 Year no hassle warranty against manufacturers defects.



Features:• Mixer Type - Rotating Drum.• Hydraulic Requirements - 8 GPM +.• Capacity - 6 CU. Ft.• Ships with 1/2” hoses and flat faced couplers.• Fits all universal skid steer quick attach couplers.• Empty Weight - 325 lbs.

Scoop-N-Mix ceMeNt Mixer

Scoop-N-Mix Skid Steer Mounted Cement MixerThe new Scoop-N-Mix Skid-Steer Concrete Mixer combines the advantages of a loader and a concrete mixer into one piece of equipment that provides the most efficient and economical way to produce small quantities of thoroughly mixed concrete, transport it to often “difficult to reach” pour sites, and then put it in place. Rotate the mixer into a bucket loading position.The design of the new Scoop-N-Mix permits the skid-steer’s tilt cylinders to rotate the mixer into a bucket loading position. This allows sand and gravel for the mix to be scooped up, as with a loader bucket, eliminating the back-breaking labor of load-ing by hand. Rotate the mixer to its upright mixing position. The tilt cylinders then rotate the mixer to its upright mixing posi-tion where bags of cement are broken into the mixer using the built-in bag splitter. Water is then added and within a few short minutes concrete is ready for placement.

This is simply the fastest and most economical way to produce small volumes of good quality concrete. We are all aware that ready-mix companies don’t want to deliver less than full truckloads of concrete, and even if you can get small quantities delivered, you will pay a much higher price and will probably be the last on the delivery list. With the Scoop-N-Mix and your skid-steer, you can produce good quality concrete within minutes and without the back breaking labor of hand loading a mixer. You will have concrete when you need it, where you need it, and at a very economical cost.

Concrete Discharge:Concrete can be discharged in one of two ways through a mechanical lift gate on the side of the mixer and down a chute, or by simply tilting the mixer down with the tilt cylinders and discharging out the top. Either way, the speed and quantity of dis-charge can be easily controlled. This attachment is simply a winner!



Features:• Universal Quick Attach Mounting• All steel welded construction• Mixing Drum – abrasion resistant steel• Built-in cement bag breaker• Side discharge mechanical lift gate• 24” x 12” Side Chute• Reversible neoprene pads for mixer paddles Chain &

sprocket drive• Skid-Steer mounting – universal quick-tach

• Recommended skid-steer rated capacity – 1600 lbs. or greater

• Auxiliary Hydraulics – 12 to15 gpm (high-flow not required)

• Hydraulic Hoses & Quick-Disconnects included• Mixer Drum width – 36” ID• Overall width – 50”• Overall height – 35”• Overall depth – 30”• Empty weight – 930 lbs.

Skid Steer back-up camera SyStem

eTerra CM-20 Camera System:

This is a product that everyone can relate to. How many times have you run into objects when reversing your skid steer? This remote camera system allows you to mount the camera in a place where you simply cannot see and watch the action on a 5.8 inch TFT color screen.

All of the hardware and wiring is included so you do not have to run out to the hardware store to make it work. I liked it so much that I added it onto my truck as well so when I back up to engage my trailer, I no long run the hitch into my bumper. I have been able to back up and connect perfectly since adding it.

You will be amazed by how well this works and just how good you can see out the rear.

The screen is dual channel so you can run two cameras at once. It is also shielded to keep the sun from reflecting onto the screen. This is a great package for skid steer loaders as well as dump trucks and larger machinery.



Features:• Larger 5.8” TFT Screen - Samsung• 2 Channel Capability - Manual Switching• Camera Enclosed in Heavy Cast Aluminum Waterproof

Housing• Sony - CCD, 420TVL, IR, Audio, 150 Degree View

Angle Camera• Wireline Connection from Cameras to Monitor

eliminates power control and interference to camera• Heavier, More Robust Mounting System

• Heavy Cabling with Locking Sealed Connectors• Infrared LED’s for Night Vision• Internal Microphone

Bradco cold Planers

Bradco Cold Planers are one heavy piece of equipment. Designed for the harsh rigors of commercial applications, this ma-chine is built to stand the test of time. Independent self leveling depth adjustment plates allow precise lapping cuts and taper cuts. A HD planetary drive delivers high torque. High rear spoil clearance prevents recirculation of material. Protective shields for hydraulic and electrical components. Solid hardened steel wheels with greasable manifold pins and protected grease zerks.

Exclusive angled spoil guard wheel design prevents wheels from riding up and over millings. This feature provides more force to the cutting action by significantly reducing rolling resistance and allows for maintained control over depth of cut. The stan-dard configuration ships with hydraulic side shift, mechanical depth and tilt. 22 - 28 GPM rated motor & standard drum assem-bly with standard duty picks.

This item comes with a 2 year manufacturer’s warranty & ships complete with hoses and 1/2” or 3/4” Flat Face Couplers.



Model SP300-12 HP400-16 HP450-18 HP600-24 HP750-30 HP1000-40Hydraulic Requirements Standard High Flow High Flow High Flow High Flow High FlowHydraulic Flow Range 12-22 GPM 22-40 GPM 22-40 GPM 22-40 GPM 22-40 GPM 22-40 GPMOverall Width 51.94Ó 64.94Ó 64.94Ó 64.94Ó 64.94Ó 64.94ÓOverall Height 32.15Ó 34.57Ó 34.57Ó 34.57Ó 34.57Ó 34.57ÓOverall Length 43.86Ó 50.30Ó 50.30Ó 50.30Ó 50.30Ó 50.30ÓPlaning Width 12Ó 16Ó 18Ó 24Ó 30Ó 40ÓPlaning Depth 0Ó - 5Ó 0Ó - 5Ó 0Ó - 5Ó 0Ó - 5Ó 0Ó - 5Ó 0Ó - 5ÓTilt +- 11¡ +- 8¡ +- 8¡ +- 8¡ +- 8¡ +- 8¡Drum Diameter 19Ó 22Ó 22Ó 22Ó 22Ó 22Ó# of Picks 37 43 43 57 69 69Weight 1500 lbs. 2150 lbs. 2200 lbs. 2400 lbs. 2600 lbs. 3100 lbs.Sideshift - Center to Right 0Ó - 19Ó -3Ó - 22Ó -3Ó - 22Ó -3Ó - 22Ó -3Ó - 22Ó -3Ó - 22ÓOperating Pressure PSI 2500-3000 2500-3000 2500-3000 2500-3000 2500-3000 2500-3000

ConCrete Chuter

This is the original concrete bucket designed for car-rying and placing concrete with your skid steer loader where trucks cannot go. It is simple, quick and clean. It allows you to accurately place concrete where you need it without any waste. This attachment is built rug-gedly to carry heavy material, take a beating and still operate perfectly. It has a tough hydraulically operated control door with a tight fitting seal to insure accurate material delivery.

The patented safety door is completely inaccessible to co-workers to prevent accidental injuries.

There are two sizes available. A 1/2 yard version is great for smaller machines and the 3/4 yard version is great for larger machines. Both buckets ship complete with hoses and flat faced couplers.



Specifications: • Capacity - 1/2 Yard• Length - 36”• Height - 28”• Length With Chute installed - 65.5”• Weight Capacity - 1700 lbs.• Weight of Chuter - 426• Finish - Grey Powder Coat

• Capacity - 3/4 Yard• Length - 38.5”• Height - 30”• Length With Chute installed - /68”• Weight Capacity - 2500 lbs.• Weight of Chuter - 563• 1/2 & 3/4 Yard Models Ship with 1/2” FF Couplers and

hoses. Universal Quich Tach Fit.

The ConCreTe Claw

When you have a heavy demolition project that requires only the best tools, this product is an absolute must have. You can pry, cut, tear and rip your way through almost anything. It was designed to get under concrete slabs and tear them out while leaving them in tact as mush as possible so you can carry the slab away. Because of this intended use, the materials used in this bucket are phenominal. You can get into stumps with it and cut and rip as well.

Many people see this bucket and had never even thought they needed one until that day. Next thing you know they have it in the back of their truck and off they go. If you have looked at anything similar and are ready to buy, we urge you to look this one over very closely as the quality shines through on every cut, bend and weld.

You will not be disappointed!

The Concrete Claw is designed to remove concrete driveways, sidewalks or any other heavy constructions site tear-out you may have. Simply slide the claw under the object, lift and load. This design allows for a cleaner, quicker and more efficient means of removing concrete. The teeth are fully replaceable as are the shanks. The Concrete Claw is designed to fit all mod-ern skid steer loaders utilizing the Universal Quick Attach System including Bobcat, Caterpillar, Thomas, New Holland, John Deere, Case Bulldog, Daewoo, JCB, Mustang, Takeuchi, Komatsu, Shinheung, and Hyundai skid steer loaders.

One look at this attachment and you will be glad you chose the Concrete Claw to add to your arsenal. Comes with a 1 year no hassle warranty against manufacturers defects.



Features:• Working Width - 24”.• Working Depth - 48”.• Rear Opening Height - 7.5”.• Height 21”.• 1” x 8” wear resistant Pacal Steel tapered cutting edge. • Name Brand replaceable teeth with 1-1/2” wide shanks.• Rubberized flex pins securely fasten replaceable points.• Weight - 575 lbs.

DUMPZit

Skid Steer Mounted Dumpzit 3/4 Yard:

The Dumpzit is a remarkable device that can reduce labor costs and is capable of handling a broad range of materials. It will improve versatility and use of equipment that you already own and operate. The Dumpzit is tough, safe, easy to maintain. It is easily adapted to trucks and various types of trailers and equipment. It offers wireless remote control capabilities to improve safety and placement of materials.

The Dumpzit can enhance many of your production needs, as well as reduce your costs!• Gravel / multiple aggregates / rubble materials• Sand / top soil• Debris removal / brick, block, concrete, muck• Waste / construction demolition• Rip rap materials / placement• Retaining walls• Hazardous materials handling (special liners available)• Hands free disposal bag / loading• Liquid solids• Pool decks - placement and demolition• Helps with non-invasive material placement



Features:• Skid Steer Mounted• Up to 2 yards capacity.• Side Dumping Capacity• Remote Controlled• Weight - 850 lbs.

EZ-AugEr

The eTerra EZ-Auger uses our multi-purpose back platewhich can be reused on a number of our products. Thismeans you only need to buy the plate once.

The standard assembly includes the back plate, the auger drive with swivel, hoses and fittings. It does not come with a bit unless ordered separately.

• Available bit sizes - 6”, 9”, 12”, 14”, 18”.• 18” & 24” tree planting bits are also available.• Ideal for machines with a lifting capacity of 900# and up

(25HP or above recommended).• Recommended for machines equipped with auxiliary

hydraulics rated @ 7 GPM to 25 GPM flow with 1500psi - 3000psi pressure rating.

• Universal Skid Steer Quick-Tach mounting bracket will fit most Skid Steer models 1994 and newer including Gehl, New Holland, John Deere, Bobcat, Mustang, Case, Thomas & Caterpillar.

New Features designed into the EZ-Auger makes the frame more compact and stronger. The strength of this frame al-lowed us to change the hanging angle so the frame can be tilted back and support the bit. This allows you to easily lay the auger down with the bit extended which makes it great for loading on a truck or trailer. The drive motor utilizes a Whites roller stator direct drive that is designed for auger use and is of the highest quality made in America.

The EZ-Auger is ideal for 90% of most users requirements. It can be used to drill holes in average ground conditions up to 18”. For heavier requirements or commercial operations, check out our HDS - Heavy Duty Series auger drives.



Specifications:• Universal Skid Steer mounting.• 1 1/2” O.D. Output Shaft with Collar for full 2” O.D.• Hydraulic Auger Head Weight - 77 lbs.• 32 Cubic-Inch Displacement.• 7 RPM per Gallon Speed.• 200 RPM @ Maximum Rated Flow.25 GPM Rated

Maximum Flow.• 485 in/lbs Torque per 100 PSI.

• 2500 PSI Continuous (Max Pressure).3000 PSI Peak (Max Pressure).

• 2” Round Drive Output.

EZ-Boom

The EZ-Boom is a simple, yet effective way to add 8 feet of extension to vertical lift of your skid steer loader. Because it attaches directly to your plate, it can face straight up, allowing you to do a full vertical lift on a truss or whatever else you desire.

When a boom will go straight up, it allows you to keep your center of gravity back at the machine so you can lift more and go up further. Hmmm, more lift for less money. Isn’t that just what you wanted? The EZ-Boom is great for truss placement, tree moving and locating as well as countless other lifting projects.

The EZ-Boom mounts directly to our Universal Mount Back Plate. It uses 2” x 3” tubing with a specially mounted angled tab along the bottom with connecting holes for your convenience. This allows the user to attach their lifting hardware along several points on the EZ-Boom.

1 Year Manufacturers warranty.



Features:• 8” Length.• 2” x 3” Tubing Construction.• 8 connecting points along bottom of boom.• Bolts directly to EZ-Mount adaptor.• Capacity 1000 lbs.• Weight - 325 lbs.• Finish - Black Hamerite Powder Coat

eZ-hitch

The EZ-Hitch is just like it says in the name. It is simple to use and its uses are unlimited. We keep a couple around our yard with different ball configurations. With the power Quick-Tach on our machine, we are able to pick up and move different items without ever getting out of our machines.

It is the best way for backing trailers into confined spaces because the operator is not having to look into a mirror. You are looking right at the item as you move it. Nothing could be simpler. Other uses have been launching boats at marinas, placing mobile homes onto pads and placing trailers into buildings for long term stoarge.

Included with this unit is the Universal Skid Steer Backplate and Hitch (Hitch Balls are not included). This is no ordinary backplate, it’s structurally sound as a standalone backplate and tool carrier. This means you do not have to weld it to another plate to keep it from bending. It is capable of handling any load that you can put on it. It uses a universal mounting pattern that allows you to mount the hitch in different locations on the plate. You can also add a second hitch with a different ball configu-ration or a pintle hitch. It is one of the handiest attachments available.



Specifications:• Universal Skid Steer Mounting Plate.• Reese Style Hitch Receiver.• Uses a 2 Rail mounting plate with two bolt on positions.• Mounting plate is our EZ-Mount system which allows

you to unbolt the hitch and add an auger.• Add a splitter directly into the adaptor in seconds.• Weight - 135 lbs.

EZ-Mount SyStEM

The EZ-Mount re-useable mounting plate:It all starts here. Buy just one plate and easily add all of at-tachments shown as list options.

8 Foot Boom:Simply bolts on with 8 supplied Grade 8 bolts. This boom extends straight up for heavy truss lifting. Rated @ 1000 lbs. lifting capacity.

Auger Head: Comes complete with swivel and hoses. Couplers and bits are optional and need to be added from the accessories pages. Full power specifications are available on the auger pages.

Log Splitter:Complete with the hitch adaptor. This attachment is truly 2 attachments in one.

Salt/Seed Spreader:These are separate units but are similar in design and func-tion. Just the controls are different. These come with a Reese Hitch adaptor.

3-Point Adaptor:Price includes 2 x Quick Hitches, Reese Hitch Adaptor, Top link & Top Link Pin. Customer to choose Cat 1 or 2. Cat 1 is default.

Hitch Adaptor:Reese Hitch Adaptor



Features:• The most comprehensible multi-use system available

for skid steer loaders.• Two plate styles available depending on which options

you would like to operate.• A proven long lasting system in use for over 10 years.• Fits all modern skid steer loaders including Case 1800

series.

magnum Forestry mulcher

Specially designed for high-flow skid steers, this unit is avail-able in a cutting width of 5’. The light, strong and low profile makes this mulcher head the best skid steer mulcher head on the market. Standard features include front mounted hydrau-lic deflector door, adjustable push bar and hydraulic pressure gauge. An optional hydraulic oil cooler is available for ma-chines with inadequate cooling systems.This is a high flow only attachment because of the horsepow-er required to grind logs and stumps. High flow is currently defined as flows over 31 GPM at 3000 psi or greater.

What sets the Magnum Mulcher Apart From the Rest?• Hydraulic Deflector Door for control of discharge particle size and discharge. • Hydraulic driven, self aligning belt drive designed at 200 % of rated horsepower, low maintenance and great durability.• Fixed hammers with double sided cutting teeth which are reversible. Each holder has 2 teeth on each side which can be field swapped over.

• Solid through shaft adds rigidity.• Tooth location on rotor insures only two teeth contact mate-rial at one time reducing drag on motor• Heavy duty drum design consisting of 3⁄4 inch wall thick-ness and five reinforcing stabilizers reduces rotor flex result-ing in increased bearing life• Ability to adjust motor hydraulic flow to match output of host machine increases production by reducing recovery time• Unique chevron design 200HP drive belt and sprockets eliminates slippage & eliminates tensioning devices which can become weak and break. I also reduces load on bear-ings & significantly reduces down time and maintenance cost• Optional Oil Cooler increases production by cooling hy-draulic oil and virtually eliminate down time required to let machine cool down. Also protects host machine hydraulic system from damage due to constant overheating.



Specifications:• Fits all Skid Steers e/w Universal Quick Tach Adaptors.• Designed for High Flow Skid Steer Loaders only 30

GPM - 60 GPM.• Single and double faced teeth available.• 48 Teeth Total• Balanced .75” wall drum and 2.438” alloy steel dive

shaft.• Shreds up to 8” hardwood material.

• Engineered for skid steers up to 165 HP.• Operational speed is 2000 RPM.• Adjustable Skid Plates.• Adjustable Push Bar.• Roller Bearings are mechanically protected.• Overall Width 72”• Cutting Width - 60”• Weight 2250 lbs.

SkidSteer ForkS

eTerra Skid Steer Forks are designed with the operator in mind. They have plenty of visibility from the rear and sides. The backplate is taller to protect the operator from items falling off the back of the forks. Do not kid yourself. This happens more often than you think.

Terra-Forks forks can take the abuse of being attachedto a skid steer without falling apart because theywere designed specifically for skid steer loaders.

The heavy duty construction of the frame workis standard for all Terra-Forks forks and the quality is second to none.

Pallet forks can be used for a variety of projects including gathering brush, log lifting and rock handling. Their high strength to weight ratio allows you to lift more weight and hold onto it more securely.

The eTerra skid steer universal mounting system allows connection to all modern two-pin full sized skid steers and some older Case 1800 series models employing the narrower hitch points.

The forks are sand blasted, acid dipped and powder coated with a Hammerite finish.

Terra-Forks come in 4000 lb. and 5000 lb. ratings. For most people the 4000 lb. forks will work for genral pallet movement. For people that use your forks for more than general lifting the 5000 lb. model is reccomended. They are great for digging out and moving logs and stumps. Under most conditions, they are practically indestructable.

Both weight rated forks are 48” long.



Specifications:• Universal Skid Steer Mounting Plate.• Size - 48” Long Tines.• Rating - 4000 lbs. (2000 lbs. Per Tine).• 2 - 1 Safety Factor on Fork Rating.• 1 - 1/2” Thick, 4” Wide Tines.• Adjustable Locking Levers on Each Fork.• 48” Wide Fork Carrier.• Weight - 444 lbs.

• Rating - 5000 lbs. (2500 lbs. per tine).• 2 - 1 Safety Factor on Fork Rating.• 1 - 3/4” Thick, 4” Wide Tines.• Adjustable Locking Levers on Each Fork.• 48” Wide Fork Carrier.• Weight - 484 lbs.

fuel Caddy

The eTerra Fuel Caddy is another Skid Steer Solutions exclusive. On a job site, we were always running out of fuel and run-ning around with gas cans. How many times have you needed to have your fuel moved around a job site. The eTerra Fuel Caddy does the trick with ease and no mess. The outer liner protects your fuel tank from damage and acts as a spill collector. The environment will love you for that!

Quickly connect the Fuel Caddy to your skid steer using your standard quick attach and you are off. Fuel when and where you need it. It cannot get any simpler than that. The 12 volt pump is rated at 15 GPM so it will fill the average skid steer in about 2 minutes. The mobility of this product is awesome as you can use it on the site and then load it for removal or re-filling using your skid steer. Another simple solution from the skid steer solutions people.

This is a completely self contained 96 Gallon fuel system. All you add is the fuel and then connect the electrical ends to your battery when you need to dispense fuel. It does not get any simpler. This system comes complete with a 12 volt pump rated at 15 GPM, an automatic shut off trigger gun along with 12 feet of hose and 20 feet of battery cable with alligator clips to connect to your battery.

This tank is completely portable and is built to last. A must for every job site. How much time do you spend constantly running out to buy more fuel or filling 5 gallon cans continuously?

Just how much is your time worth?



Features:• Width - 46”.• Height - 34” • Depth - 24” • Capacity - 96 US Gallons.• Rated for Diesel or Gasoline.• 12 Volt - 15 GPM Pump supplied.• Auto shut-off dispenser.• Weight - 650 lbs.

Genesis Demolition shear

Here is a real winner. This Versi-Pro base made by Genesis allows you to run three tools instead of one. Fitting with our Skid Steer Solutions attitude, this product adds much more value to a Scrap Yard or Demolition Contractor’s arsenal. In fact, we think this product is a winning combination or power and versatility.

We use our standard industry control circuitry that is tried and tested on several skid steer implements. You can buy the same head elsewhere, but it will not be skid steer adapted or proven to work properly on your machine. We utilize a standard wiring harness and our plug and play options available for Bobcat, John Deere, New Holland (14 Pin) or Cat and ASV (8 Pin). This is a feature that we supply, guarantee to work and it is available only at Skid Steer Solutions.



Features:• Total Length - 68” With Attached Head • Operating Pressure - 2500 - 3600 PSI• Ships Complete With Universal Skid Steer Mounting Plate• 1/2” Flat Faced Couplers Included• Wiring Harness for 8 pin or 14 pin Application Included - Customer responsibility to check conformity• Base plus three removable head styles available which include a shear, concrete cracker and grapple.• Weight - 900 lbs. - 1200 - 1250 lbs. with a head.

AshlAnd Ground hoG 2500

Moving materials using a bucket is a long tedious process. The farther the distance, the worse the situation gets. The Ground Hog changes this and makes your Skid Steer/Compact Track Loader into a dirt moving machine.

Factory Assembled with the following features:• Heavy-duty universal attachment plate mounted onto a large rockshaft • Large 3” (7.62 cm) ball bushing mounting caps• Heavy duty front oscillation beam • Heavy duty caster fork system with large vertical 2.5” (6.35 cm) kingpin spindles complete with tapered cup and cone

bearing system• The pass-thru 1.5” (3.81 cm) front axle • Pair of 8” x 15” wheels with 11L X 15 Implement Rib tires, 6 ply• 84” (213.4 cm) safety chain • Pair of 1/2” x 70” (1.27 cm x 177.8 cm) hydraulic hoses with 1/2” NPT to ORB-12 male• Front apron door assembly • 3 section blade system, 1/2” x 6” x 42” center blade, 1/2” x 4” x 15” wrap around corner blades (left & right)• Male&femalelowflowcouplersareprovided.• Pair of 3.5” x 16” (8.89 cm x 40.64 cm) welded lift cylinders with 1.5” (3.81 cm) shaft diameter and 1” (2.54 cm) pins



Features:• 2.5 cu. yd. (1.9 cu. m.) heaped• 1.9 cu. yds. (1.5 cu. m.) struck• Minimum 70+ HP compact track loader or skid steer

with steel tracks• 72“ (1.83 m) Width of Cut• 89” (2.26 m) Overall Width• 122” (3.1 m) Overall Length• 44” (1.2 m) Overall Height• Operatesonlowflowhydrauliccircuit

• Bucket dimensions; 72” wide, 24” tall, 61” long (includ-ing apron)

• Apron opening, maximum unload postion 27.5” (69.8 cm)

• Apron opening, maximum loading position 12” (30.48 cm)

• Depth of spread, 4.75 to 14” (12.07 cm to 35.56 cm)• Weight 2,900 lbs (1,315 Kg)

DG SerieS Box GraDerS

The DG-Grader makes it simple for anyone to perform a wide range of tasks and make them look like they were done by pro-fessionals with almost no training at all. Whether you need to grade a road, a field or just final grade a landscape surface, this is the tool.

How is this possible?There are many issues to overcome when using a skid steer for grading. The toughest issue is the constant rocking from the machine when you are pushing. One wheel breaks free for an instant and allows the attachment to rock. The attachment digs in and the machine follows the contour and you just end up with a big mess. The DG-Grader overcomes this issue by adding another contact base to the ground. The side rails are always in contact with the ground and weight is applied by the down pressure of the boom. This causes the blades to run constant regardless of what the skid steer is doing because you are lev-eling a smooth base in front. The skid steer then has a level surface to run onwhich in turn adds to the quality of the cut.

The DG graders are a bi-directional grading tool. You can grade and smoothen out the material in both directions. If you have large areas of material to grade, then this is your tool.



Features:• AR400 Contact Surfaces - Replaceable• Heavy Walled 3” x 4” Tubular Frame• Adjustable Hardened Curved Blade Surfaces• Universal Skid Steer Mount Including Slots for Case

1800 Series Machines• Heavy Reinforced Blade Carriers• Blades - 4 x 5/8” x 6” Hardened & Replaceable• Finish - White Sandblasted, Primered, Industrial Enamel

Grader DG-72Ó DG-84Ó

Weight 1000 lbs. 1100 lbs

Width 72Ó 84Ó

Overall Width 77Ó 89Ó

Depth 48Ó 48Ó

M SerieS Harley rakeS

25 years of design experience and operator feedback has led to the modern Harley rake designs. Today’s models are designed for modern more powerful skid steer weights and power. Designed for the budget conscious users who do not need all of the angling features, the rigid frame Harley Rakes are a great mix of quality and function for your landscape needs. Easy to use and a cinch easy to maintain, the manual rotation great for operators who want the features at a lower price. With a Harley Landscape Power Rake, you will be productive in no time.

Harley Rakes are Ideal for:• Blending an old yard into a new one. • Power Raking a new yard into a golf course.• Removingsurfacerocksyearlythatfindthemselves

close to the surface.• Grading and blending transitions.• Thatching an established yard.• Resurfacing gravel roads and parking lots.• Preparing the perfect seedbed

Features:• Dual independantly adjustable guage wheels allow for

skim passes for overseeding or adjust to cut drainage grades.

• Pure carbide proprietary teeth design for best possible fracture pattern and superior seed and moisture reten-tion.

• Adjustable Rhino Hide Barrier above the roller allows you to quickly react to the soil conditions. You choose the size of material you want left on the seedbed.

• Quick and easily removeable/reversible end plates for windrowing and reverse box raking.

• Slimprofilebearingendsallowfulldepthfirstpassteethpenetration.

• Triple sealed and shielded bearings for extra protection and longer life.

• Well designed geometry provides great visibility.• Comes with all electrical and hydraulic connections.



Model M4F M4M M4H M6F M6M M6HWeight 440 lbs. 485 lbs. 510 lbs. 785 lbs. 900 lbs. 925 lbs.Length 51Ó 51Ó 51Ó 64Ó 64Ó 64ÓWidth 58Ó 58Ó 58Ó 81Ó 81Ó 81ÓRaking Width 48Ó 48Ó 48Ó 72Ó 72Ó 72ÓRaking Width (Full Angle) N/A 45Ó 45Ó N/A 68Ó 68ÓAngle Right or Left N/A 20¡ 20¡ N/A 20¡ 20¡

Minimum GPM 8 8 8 13 13 13

MX SerieS Harley rakeS

25 years of design experience and operator feedback has led to the modern Harley rake designs. Today’s models are designed for modern more powerful skid steer weights and power. Designed for the budget conscious users who do not need all of the angling features, the rigid frame Harley Rakes are a great mix of quality and function for your landscape needs. Easy to use and a cinch easy to maintain, the manual rotation great for operators who want the features at a lower price. With a Harley Landscape Power Rake, you will be productive in no time.

Harley Rakes are Ideal for:• Blending an old yard into a new one. • Power Raking a new yard into a golf course.• Removingsurfacerocksyearlythatfindthemselves

close to the surface.• Grading and blending transitions.• Thatching an established yard.• Resurfacing gravel roads and parking lots.• Preparing the perfect seedbed

Features:• Dual independantly adjustable guage wheels allow for

skim passes for overseeding or adjust to cut drainage grades.

• Pure carbide proprietary teeth design for best possible fracture pattern and superior seed and moisture reten-tion.

• Adjustable Rhino Hide Barrier above the roller allows you to quickly react to the soil conditions. You choose the size of material you want left on the seedbed.

• Quick and easily removeable/reversible end plates for windrowing and reverse box raking.

• Slimprofilebearingendsallowfulldepthfirstpassteethpenetration.

• Triple sealed and shielded bearings for extra protection and longer life.

• Well designed geometry provides great visibility.• Comes with all electrical and hydraulic connections.



Model MX7F MX7M MX7H MX8F MX8M MX8HWeight 855 lbs. 970 lbs. 1050 lbs. 1125 lbs. 1240 lbs. 1320 lbs.Length 64Ó 64Ó 64Ó 76Ó 76Ó 76ÓWidth 93Ó 93Ó 93Ó 100Ó 100Ó 100ÓRaking Width 84Ó 84Ó 84Ó 90Ó 90Ó 90ÓRaking Width (Full Angle) N/A 79Ó 79Ó N/A 85Ó 85ÓAngle Right or Left N/A 20¡ 20¡ N/A 20¡ 20¡

Minimum GPM 15 15 15 17 17 17

GR SeRieS GRapple

How do you tell a good grapple from a wimpygrapple? The distance from the tip of the rake to thefirst cross support. Cheap materials need a lot ofreinforcing. When you reinforce a root grapple, you prettymuch destroy its usefulness. We use AR400 for all of thetines on this grapple which makes it able to act like a trueroot grapple and actually get under and rip up the roots.

The tines on our Standard Heavy Duty Series Grappleextend 14 Inches without any support. This allows you toroot grapple into the dirt and tear out anything that is in theground. Ask any other grapple manufacturer what materialsthey use and the answer will most likely be A36 or A50which is just mild steel. This material is fine for backplates,but not for the grapple itself. We use a lot of AR400material.

The tines do not extend far out in front, but moredownward. They allow you to bring the material in close tothe backplate so you maintain your center of gravity whichallows you to carry even more material. There are two cylinders

which operate the upper grapple together to giveyou a lot of grappling force. The cylinders are tucked inbehind the grapple and the hoses are routed behind so youcannot damage either duty normal use.

The upper grapple is a solid piece extending from one sideto the other. The best feature of having the upper boom as asolid piece is that you can actually tilt the unit forward andrake backwards into the grapple. You can get right up to theside of a building or fence line and pull material away intothe grapple. We know of no other grapple that can operatethis way. Our objective with this grapple is to sell yousomething that actually works well, not just looks like it willwork. From the design, materials, the greasable pivot pointsand structural integrity of this grapple you can see it is awinner.

All of the grapples in this series are built similarly. Checkthe comparison chart to see the different steel thicknessused as well as the cylinder sizes and operational sizeswhen making comparisons.



GR Standard Heavy Duty

Outer Tine Upper and Lower

Min. Grapple Width

MAXOpening

Spacing Weight

60 1/2Ó 5/8Ó 58 3/8Ó 51Ó 6Ó 730

66 1/2Ó 5/8Ó 65 1/2Ó 51Ó 6Ó 85072 1/2Ó 5/8Ó 72Ó 51Ó 6Ó 91078 1/2Ó 5/8Ó 78 3/4Ó 51Ó 6Ó 102085 1/2Ó 5/8Ó 85Ó 51Ó 6Ó 1100

GRX SeRieS GRapple

GRX Grapple give you more of what you want for heavy duty machines and applications. Thicker AR400 steel alloy, Larger Main Tines, and a massive opening all separate the GRX Grapples from the competition.

Cheap materials need a lot of reinforcing. When you reinforce a root grapple, you pretty much destroy its usefulness. We use AR400 for all of the tines on this grapple which makes it able to act like a true root grapple and actually get under and rip up the roots.

The tines on our Standard Heavy Duty Series Grappleextend 14 Inches without any support. This allows you to root grapple into the dirt and tear out anything that is in the ground. Ask any other grapple manufacturer what materials they use and the answer will most likely be A36 or A50 which is just mild steel. This material is fine for backplates, but not for the grapple itself. We use a lot of AR400 material.

The tines do not extend far out in front, but moredownward. They allow you to bring the material in close to the

backplate so you maintain your center of gravity which allows you to carry even more material. There are two cylinders which operate the upper grapple together to give you a lot of grap-pling force. The cylinders are tucked in behind the grapple and the hoses are routed behind so you cannot damage either duty normal use.

The upper grapple is a solid piece extending from one side to the other. The best feature of having the upper boom as a solid piece is that you can actually tilt the unit forward and rake backwards into the grapple. You can get right up to the side of a building or fence line and pull material away into the grapple. We know of no other grapple that can operate this way. Our objec-tive with this grapple is to sell you something that actually works well, not just looks like it will work. From the design, materials, the greasable pivot points and structural integrity of this grapple you can see it is a winner.

All of the grapples in this series are built similarly. Checkthe comparison chart to see the different steel thicknessused as well as the cylinder sizes and operational sizes.



GRX Xtreme Heavy Duty Series

Outer Tine Up-per and Lower

Min. Grapple Width

MAX Opening

Spacing Weight

74 5/8Ó 3/4Ó 74Ó 65Ó 6Ó 1265

80 5/8Ó 3/4Ó 80 3/8Ó 65Ó 6Ó 1365

86 5/8Ó 3/4Ó 87 3/8Ó 65Ó 6Ó 1460

BSG RotatinG GRapple

BSG Skid Steer Rotating Grapple Designed by an Arborist, this is the finest rotating grapple you will find anywhere...

Boom Design: The shape and angle of the boom enables the operator to lift more and actually see the material they are carrying. Equipped with the rotor mount, cable guide, winch mount, tooth edge plate and a commercial rubber bumper, no feature was left out.

The frame is built from top quality materials by profession-als. This is not a homebuilt product. The frame carries all of the weight and has to be built to support the winch, rotor and grapple. Check out the competitions frames and you will be amazed.

Grapple: The grapple opens from 3” to 63” and is rated to carry up to 8800 lbs. This is a commercial quality grapple. All of the pivot points feature bronze insert bushings and grease fittings

so you can keep it operating like new forever.

Rotator:Again another commercial grade item included on this prod-uct. It is rated for 8800 lbs. of load and continuous operation. By using a highly rated rotator, you insure that it cannot be easily damaged by moving loads. This is where other manu-facturers try to save money and put lesser quality rotators on their grapples.

Winches: - OptionalWe are proud to use only Warn winches. They are rated for 9,000, 12,000 or 15,000 lbs. The winch makes it very easy for you to pull trees to you that you could not otherwise reach.

The 9,000 lb. winch comes with 110 feet of 3/8” wire rope, while the 12K and 15K lb. winches use 100 feet of 7/16” of wire rope. The rolling eye features rollers with pressed bronze bushings with 1” stainless steel pins. The entire mechanism is built to last under extreme conditions.



Features:• Grapple opens from 3” - 62”• Compact bypass style grapple with 17,000 lbs. of

crushing force• 360 Degree Continuous Operation• 8800 lb. Operation Range• Manufactured in the USA• Hydraulic Flow Requirement - 11 - 21 GPM @ 3000

PSI.• Winch Shield for Safety

• Frame Designed for Open Visibility to Grapple and Winch

• Drop Down Jacks for Easy Disconnect and Reconnect• Heavy Serrated Edge Plate for Securing Logs• Industrial Bumper used to Secure Grapple and/or Ma-

terial While Travelling• Hoses Rated to 4000 psi• Weight 800 lbs. • Recommended for Skid Steer Loaders with a minimum

1500 lb. lifting capacity or larger.

G2 Grapple

Many grapples sold are just glorified buckets with some means of clamping down on the frame. None of those grapples have ever met our expectations ...

UNTIL NOW!! At 900 lbs., this is a Grappling Heavy Weight.

Other Grapples available have such short teeth that you cannot reach under an item and grip it. To add strength, the manufacturers have added plenty of reinforced teeth or frame work, but this takes so much away in functionality that you may as well use a regular bucket. In fact, we have preferred using a set of pallet forks for a lot of Grapple type functions because they allowed us to reach under large items such as logs or hay bales... Until now.

The G2 Grapple has only three large reinforced teeth that allow you to reach, rip and tear. It is so strong that you can scarify solid ground and rip up concrete. Once you tear up the concrete, you can pick it up and dump it. Clearing

large brush and stump areas is a snap. Tree gathering and general clearing mayhem is a blast with this attachment. You simply cannot find a tougher Grapple than this.

Logging projects are a snap with the G2. Most of the time you would chase the branches around and try to grab them. With this tool, we would just dive into whatever pile was in our way and as the grapple closed, it would pull the material to the center and actually compact it... WOW!!

It has the power and strength to pierce the trees with a single tine and skid them backwards out of the forest. If you tried this with any other grapple, you would continually drop the log as they just do not have the strength to hold on.

This is simply the toughest grapple on the market today. Comes with a 1 year manufacturers warranty.



Features:• Material A572 Grade 50 Steel.• 400 Burnell Hardened Tips - All US Steel from Iowa

Mills.• 1-3/4” Thick x 5” Deep Spar.• 2 1/2” Diameter Pivot Shaft.• Width 38”.• Jaws open to 31” and overlap or scissor when closed.• All pivot surfaces are machined and are greasable.• All hardware is Grade 8.

• 37,000 lbs. of mechanical pressure at the tips.• 19” Tine Spacing.• 2.5” Axial Pivot Shaft.• 5” Bore Cylinder.• Comes with hoses and flat faced couplers.• Weight - 900 lbs.

G3 Grapple

This grapple was developed specifically based upon customer feedback. A lot of people loved the design of the G2 Grapple, but wanted more tines so that the grapple could pick up smaller items. Finally after some customers started having us quote extra tines that they would weld on themselves, we responded.

The G3 Grapple is the G2 only with 5 tines on the top and bottom. The tines are exactly the same. Nothing has been com-promised in the design or function. This grapple does weigh in at 1216 pounds so it is not for everyone. You need a machine of at least 1750 lb. lift capacity to have an adequate payload.

This grapple is ideal for demolition and clean up in confined spaces. You can still tear out concrete as well as pick up the pieces. Of course logging is still a cinch and what about heavy rock work? Nothing is impossible with this grapple. It is built to the high commercial standards.

Built tough enough to break and lift 4” - 6” reinforced concrete, but nimble enough to lift pipe and carry without a dent. It oper-ated best with a machine lifting capacity of 2000 lbs. or more and a minimum hydraulic pressure of 2250 PSI. This is simply the toughest built and most unique grapple on the market today. Whether you choose the G3 or G2 Grapple, you are sure to be proud to own them and will have them for a very long time.

Comes with a 1 year warranty against manufacturers defects.



Specifications:• Material A572 Grade 50 Steel .• 400 Burnell Hardened Tips - All US Steel.• 1 3/4 Inch thick x 5” deep spar.• 2 1/2” Diameter Pivot Shaft.• Width 38”.• Jaws open to 31” and overlap or scissor when closed.• All pivot surfaces are machined and are greasable.• All hardware is Grade 8.• 37,000 lbs. of mechanical pressure at the tips.

• 2.5” Axial Pivot Shaft.• 9” Tine Spacing.• Weight - 1215 lbs.

M&M Hydra Clip

Hydra-Clip:

The M&M 16” Hydra-Clip Tree Shear provides the shearing professional with a state-of-the-art device that they will be proud to own and operate. Designed by a shearing professional for operators in the industry, the M&M Hydra-Clip and Hydra-Snip are ingenius by design and true to their quality roots. There is no other flush cut shear that we can find that even comes close to the design, features and quality of M&M Shears.

Features:• Can cut a 16” Tree in one cut. Larger trees can be cut with additional cuts. • Viewing window for maximum visibility at cutting edge • Dynamically engineered cylinder angles from maximum power • 5” Cylinders with 3” shaft • Full frame wrap around design • 3” solid steel jaws • Extended tips for larger cuts • Flush mounted bolts on the bottom of the blades • True flush-to-the-ground cutting ablility • Extra strong skid steer mounting plate reinforced in just the right places



Specifications:• Width - 76” • Height - 4’ - 5’ with Standard Push Bar/Screen• 4” chrome hardened main hinge pins cross cut for

maxiumum grease coverage. • Bare Weight w/o Options - 1550 lbs.• Weight with all options - 2100 lbs.• Comes with all hoses, wiring and controls.

Options: • 10 Gallon internally mounted sprayer tank • 36”, 48” or 60” Protective Screen • Grapple Accumulator

- Adds 450 lbs. to the Hydra-Clip - 57” Tall - 16” Capacity - 2” Welded Hydraulic Cylinder

M&M Hydra Snip

Hydra-Snip:

The M&M 12” Hydra-Snip Tree Shear shares many of the features of the full size Hydra-Clip and all of the quality you come to expect from M&M. Designed by a shearing professional for operators in the industry, the M&M Hydra-Clip and Hydra-Snip are ingenius by design and true to their quality roots. There is no other flush cut shear that we can find that even comes close to the design, features and quality of M&M Shears.

Features: • Can cut a 12” Tree in one cut. Larger trees can be cut with additional cuts.• Viewing window for maximum visibility at cutting edge• Dynamically engineered cylinder angles from maximum power• Full frame wrap around design• 2.5” solid steel jaws• Extended tips for larger cuts• Flush mounted bolts on the bottom of the blades• True flush-to-the-ground cutting ablility• Extra strong skid steer mounting plate reinforced in just the right places



Specifications:• Width - 61”• 22” Tall and up to 48” tall with optional screen.• 34” Deep• 3” chrome hardened main hinge pins cross cut for

maxiumum grease coverage• Bare Weight w/o Options - 800 lbs.

Options: • Internally mounted sprayer tank• 24”, 36” or 48” Protective Screen

Hydraulic rock Breaker

For Skid Steer Mounted Breakers in the 450 ft. Lb. to 850 ft. lb. range our breakers are simply the best. They use a really simple design that has been proven to last and last. Parts and accessories are readily available through warehouses located in Washington and California. There are so many breaker manufacturers that service becomes more and more important. What good is a cheap breaker that is constantly breaking down and there are no parts readily available. We realized a long time ago that most people that buy concrete breakers use them to earn their living. We respect that and do our best to make sure you are always taken care of long after the sale is made.

Our breakers are designed for lower maintenance with a boltless mounting system. The power cell is internally crushed be-tween 2 vinyl blocks. This gives the operator a much smoother operation and far less shaking that other designs. It also mini-mizes broken blots that inevitably lead to product failures (usually on an important job).

The internal Vibro-silencing reduces total operator & carrier machine vibration exposure and reduces external noise beyond many competitive claims.

This is a a high quality, modern hammer at a surprisingly low price.



Arrowhead Ò SÓ Range S30 S40 S50 S60Max Energy Blow /ft. lbs. 450 550 750 850Require Flow GPM 8-13 8-16 12-21 14-26Operating Pressure /PSI 1600 1650 1700 1800Blows Per Minute 700-1250 550-1250 650-1400 550-1200Tool Diameter /Inches 2.10Ó 2.60Ó 2.75Ó 3.00ÓOverall Length /Inches 51Ó 57Ó 60Ó 63ÓWorking Weight /lbs. 350 505 575 725Guaranteed Sound Power /dB

117 118 119 121

Carrier Weight /lbs. 4450-8890 5600-11000 8200-16800 9000-18700

rockhound Landscape rake

This is the revolutionary rake that started it all. RockHound has been the choice of landscape professionals for decades and there is a reason. This thing just works! This is one of the first attachments I rented 11 years ago and I have always been very impressed by the tasks that this rake has been able to perform.

We were originally developing the lawn for our new house and had paid a guy to do it. $5000 later we had a lawn but after a year we realized the guy did a really bad job. I got out the Roundup and started over. I bought a Bobcat and rented this rake. It was incredible what a nice job it did in such a short time. I was sold, except I just did not need one for permanent use so I just rented as needed. Well it is now 11 years later and I wish I just would have bought the thing at the time. I have needed it so many times as I would have paid it off and had it to use all these years. This is just how important of an investment I have realized it would have been.

If you just bought some property and want to develop a yard

professionally and fast, this is the attachment. It tears up the top surface, and removes the rocks, brush and debris while laying down a beautiful layer of soil ready for seed. It does this quickly and easily. That is why you need this attachment. It really does pay for itself and leaves you with a new respect for just what a skid steer attachment can do.

How does it work? You simply drive backwards and engage the attachment with the ground. Your auxiliary hydraulics turn the motor that drives the tooth bars. These tooth bars act like a power rake. They churn up the ground and pull all of the material you do not want on the surface of your ground and lay down a nice fluffy layer of top soil. You add your seed and roll flat. In a couple of weeks you will have a wonderful lawn and people will swear you had a crew of people install it. Only you will know the truth. The 48” version does not have a hopper to hold the material so it is pulled to the back of the unit and must be picked up after you power rake. I use my regular bucket for clean up.



Model Working Width Overall Width Weight Number of Tooth Bars

Number of Teeth

Capacity

48C 48Ó 53Ó 520 lbs. 10 250 ?60C 60Ó 66.6Ó 1010 lbs. 12 384 10 cu/ft.

72C 72Ó 78.6Ó 1130 lbs. 12 484 12 cu/ft

Specifications:

EZ-SplittEr ii

The eTerra EZ-Splitter Series II has got some great new features that makes it and even more value packed attachment than previous models. It is a Skid Steer Mounted 20 Ton splitter which connects with a Reese adaptor to our reusable backplate. This allows you to remove the splitter with a single pin when not needed. The plate and Reese adapter can then be used toattach a trailer hitch and move equipment as required. You get two attachments in one. Now that is value!

The splitter uses a Prince log splitter detent valve that is spring loaded in the forward position so it will stop when you let go of the handle. It has a latching position in reverse so you can walk away while the splitter retracts back and resets itself to a neutral position ready for the next log.

The hydraulic cylinder used is a 4” x 24” stroke splitter rated model. The opening is 25” which allows you to slide a 24” log into the splitting frame with little effort. The Series 2 features a formed frame design with an integrated log holder and a solid cast base to keep the frame end from bending even under the toughest conditions. The main rod has been designed to pocket into the wedge so there is no pin to wear out and break.

The hoses are custom covered and include a clever hose routing system that we have perfected as well as they are equipped with flat faced couplers. The 2 rail EZ-Mount plart is our standard design that can be used for other attachments as well as the supplied hitch adaptor.

Comes with a 1 year warranty against any manufacturers defects.



Features:• Universal Skid Steer Mounting• 20 Ton Rating• Formed frame I beam equivalent size 6” x 6” @ 25 lb.

per foot.• Wedge - 8” x 1” Thick T1 Material• Cylinder - 24” stroke x 4” bore• Prince Splitter detent valve locks in place on return

stroke.

• Reinforced Reese Adaptor Mount.• Ships with 1/2” HD hoses and 1/2” Flat Faced Cou-

plers.• Two attachments in one with supplied trailer hitch

adaptor.• Easily removes for compact storage.• Weight 425 lbs.

BC series Field Mowers

The BC Series Field Mowers feature a direct drive gear motor that requires 17-25 gpm for effective brush cutting. 1/4”, A50 Steel Deck, hoses, Hardox® long life skid shoes, reversible blade rotation, offset hardened mulching blades and it will mount to any universal style skid steer loader.

What is so special about this mower?

• Front Gauge wheel - Guides the mower over all types of uneven terrain and keeps the nose from diving into side hills.• RearHinge.TheQuickAttachactuallyfloatsonahingepoint.Thisallowsthemowertofollowthegroundperfectlywithout

lifting or diving when the skid steer hits a bump.• Double edged blades for bi-directional cutting.• Lift Limiter with safety shut down.• Frontdeflectormadefromdurablequietrubber.• Hinged motor cover keeps material from accumulating around the motor.• Cushion valve for fast shut down.• Quick-attach standardized skid steer mounting plate,• 1:1 ratio roller bearing gear head, gear type hydraulic motor / motor protection valve.• Loader hydraulic requirements (at remote outlets) Minimum 17gpm @ 3,000 psi.

1 Year warranty against manufacturers defects.



Model Recommended Flow (GPM)

Cutter Width Capacity Height Weight

60Ó 17 - 25 GPM 60Ó 4Ó 22Ó 800 lbs.72Ó 17 - 25 GPM 72Ó 4Ó 22Ó 1100 lbs.84Ó 17 - 25 GPM 84Ó 4Ó 22Ó 1400 lbs.

BM-20 BooM Mower

The BM-20 Skid Steer Boom Mower system was developed specifically for Skid Steer Loaders, Tractors or Tool-Cats with a lifting capacity of 1500 lbs. or more. It is a great tool for cutting roadside or fenceline brush fast. Raise the boom up to mow overhanging trees along driveways. Add the optional sickle head and trim hedges like a pro. The BM-20 is the king of roadside mowing/trimming and cutting.

BOOM ARM:The BM-20 is fitted with a 10 Foot reach boom arm. By adding different mowing heads, the reach can be extended. A 36” flail mower extends the cut path up to 12’ 6”, while a 5 foot sickle head extends the cut up to 14’6”.

CONTROLSCustom Wireless remote control receiver is mounted inside the control box and handles all functions of the mower.The wireless remote is hand held or can be remotely mounted. Works best with machines having pilot controls, but can be adapted for most every machine style.

The custom designed hydraulic block is specifically engineered and manufactured for eTerra in the USA. This is not an off the shelf pieced together control. It has all of the functions and controls handled internally meaning you can adjust the flow to the head, preassure to the head and bleed out for the controls all on the block. This makes for very stable and easy to operate controls. This has taken us many years to perfect and you will notice the difference if you have run other hydraulic controlled implements. This is type of quality mower you would expect from Skid Steer Solutions.

MOWER HEAD:New, heavier housing able to withstand more abuse without bending. 100% DOMEX Steel Used. Only premium mowers use this material. It is lighter and stronger than competitive steel products. Longer, heavier teeth allow for heavier material cutting. Heavy duty steel rear roller teamed with a large chute opening for more efficient heavy brush cutting. Electronically balanced cutter shaft minimizes head shake when the boom is extended.



Features:• Completely enclosed front enclosure protects controls and electronics.• Solid tubing for hydraulic lines reduces hose play and damage of hoses when they hang out in the open.• Parking Leg keeps mower from falling over when not in use.• Quick connect mower heads - Two available with a third being tested. • Wireless Remote Control eliminates wiring from machine to boom. • Only 1 x 12 volt source needed to run controls. • Reach - Boom arm - 10’. 12’6” Reach with flail mower head. 14’6” reach with sickle head.• Weight - 860 lbs.

Bradco Heavy duty BrusH cutter

If you are looking for a heavy duty mower, then have we got a deal for you. This is one the the finest built rotary mowers built in America. The design is wonderful and the quality is awesome. It can easily take a beating that today’s modern skid steer loaders can dish out. It uses a dual bladed rotary design which is both efficient and tough. It uses inexpensive dual faced blades that can be reversed and resharpened.

The mower drive system is completely enclosed in a heavy duty hinged cover. The design of this mower allows the operator to mow a grass field down to 2 inches in height and then use the same mower to grind up heavy brush and tree saplings up to 3 inches in diameter. The drag edges are reinforced with AR400 so that they can be pushed along the ground and wear very slowly. The Bradco brush mowers come in models that will work with skid steer loaders with lifting capacities down to 1300 lbs. and flows as low as 15 GPM and as high as 40 GPM @ 300 PSI. With three sizes 60”, 72” and 78” you can easily find a size that suits you best.

Comes with hoses, couplers and front protective chains. Backed by a 1 year iron clad warranty from Skid Steer Solutions and Bradco. Two names you can trust in the attachment industry.



Model Height Length Width Minimum Cutting Height

Deck Height

Deck Thickness

Hydraulic GPM

Skid Steer Lift Capacity

Weight

60Ó 22.5Ó 78Ó 72Ó 2Ó 9Ó 1/4Ó Steel 15-30 1300 lbs 1230 lbs72Ó 22.5Ó 90Ó 85Ó 2Ó 9Ó 1/4Ó Steel 18-40 1700 lbs 1610 lbs78Ó 22.5Ó 96Ó 91Ó 2Ó 9Ó 1/4Ó Steel 32-40 1800 lbs 1666 lbs

QA-60 HeAvy BrusH Cutter

The Toughest Brush Clearing Device Available Anywhere!

Anything else is just........WIMPY!!

Unleash the power of your high flow hydraulics on this mon-ster. Until just the past few years this product could not even exist because the auxiliary flow rates and pressures of the machines would not provide enough power to run it.

With the modern machines pushing 40 GPM and 4000 PSI, someone had to produce a product that could harness that power and create a mower that could cut through the heavi-est of material.

Well, here it is!

The high flow workhorse of skid steer industry, built to push over small trees and brush, and then mulch them up. This at-tachment is not for everyone, but if you need a 60” skid steer mower that will handle 38 gpm of hydraulic flow and survive

even the most severe applications look no further.

Used in the harshest conditions like power line easement clearing, hurricane clean-up, lot clearing, heavy field clearing.

Your machine should have a minimum lifting capacity of 2000 lbs. and have a minimum flow rating of 30 GPM.

There are low flow models available, but they do not meet the same specifications. Contact sales for specifics about your low flow machine.

Note: Due to high pressure and rate of flow operation, a case drain must be installed on the skid steer if not equipped by the owner prior to use.



Features:• T-1 high strength steel construction (no mild steel

used).• Double 1”x 6 5/8” T-1 blade disk with reversible blades.• Quick-attach standardized skid steer mounting plate.• Gear type direct drive hydraulic motor & protection

valve. Piston Motor option available for over 35 GPM @ 3300 PSI & up.

• High rise front intake bumper, keeps material off cab.• Flat faced quick couplers, hoses and D ring.

• Polyester powder coat paint finish.• Hardox® long life skid shoes.• 30 to 45 gpm (*May require additional motor for higher

flow and pressure).• Will cut up to 8” material.• Weight - 1500 lbs.• Cutter Width = 60”. Overall Width = 72”• Capacity = 8”• Length = 64”• Weight 1500lbs

Brush hound Fh - FLaiL Mowers

Brush Hound brand Flail Mower used for general clearing on materials up to 5” (High Flow Version). 0 - 3” with the low flow version.

What makes this machine so popular is its ability to clear the brush and chip it to the point that it becomes compost. In a forested area, you can run through the brush and small trees and make them completely disappear. There is no mess left like what you would see when using a Bush Hog style mower.

A flail mower behaves much like a chipper when cutting brush. There are many teeth cutting and grinding so the end product is a fine mulch, not rough cut branches. When running this machine through small trees, the teeth cut the base of the tree and it falls over. As soon as the teeth hit the tree base, it sucks the tree into the machine and grinds it into mulch. What comes out the back is just a fine mulch. The mulch is thrown downward so nothing comes back at the operator.

Other features include: Electronically balanced cutter shaft for smooth operation, Industry Standard Universal Mount Hous-ing, High Strength Double Liner design with 1/2” end plates, Reversible 2 pound flail knives, 400 hr. average life, Adjustable ground roller height control. Optional Hammer style knives available.

This is a heavy industrial built mower so care must be exercised when sizing the mower to the skid steer. You should have a machine capable of lifting at least 1750 lbs. For smaller skid steer loaders, check out our other Brush Hound flail mowers.Warranteed against manufacturers defects for 1 year.



Model Weight Width Overall Width Cutting Height

# of Knives Flow (GPM) Capacity of Material

60Ó LF 1475 lbs. 60Ó 72Ó 0-6Ó 32 HD 16 - 20 5Ó 72Ó HF 1625 lbs. 72Ó 84Ó 0-6Ó 40 HD 18-30 4Ó84Ó HF 1850 lbs. 84Ó 96Ó 0-6Ó 48 HD 20-40 3Ó

Brush hound F series mower

Brush Hound Low Flow Flail Mower:The Brush-Hound Skid Steer front mounted mower is designed to safely cut and mulch grass and light brush. With literally no threat of flying projectiles, this mower is safe enough to use near buildings and livestock. The front gage wheel is standard when purchased through Skid Steer Solutions because in our experience it needs to be there. We will sell it without the gage wheel, but you will not be as happy as if you bought it equipped. With the front gage wheel, you can safely run over a bumpy field and not fear that you will scalp the ground.

Flail mowers are great for all purpose mowing. They do a really nice job on field grass. The ability to cut up brush and mulch it into a fine material is exceptional. They are also very friendly when used around people and livestock. They do not throw material like rotary mowers do.

Brush Hound flail mowers will fit most modern skid steer loaders using the universal quick attach adaptor. All that is required is a minimum 13 GPM flow @ 2250 PSI and you are ready to go. This item ships completely assembled and ready to mow. Maintenance is limited as it is a totally self contained machine.

Great quality commercial products are Brush Hounds mainstay. With three widths available, we have you covered.



Model Weight Width Overall Width Cutting Height

# of Knives Flow (GPM) Capacity of Material

48F 660 lbs. 48Ó 56Ó 0-6Ó 52 HD 13 GPM 1Ó 60F 750 lbs. 60Ó 68Ó 0-6Ó 60 HD 13 GPM 1Ó72F 837 lbs. 72Ó 80Ó 0-6Ó 66 HD 13 GPM 1Ó

Skid Sickle

The eTerra Skid Sickle is well suited to roadside mowing, ditch clearing as well as equestrian trail cutting. With two cutter lengths to choose from, we know we have the right solution to your cutting needs. This attachment will operate on skid steer loaders rated from 1300 lbs. lift and up with a minimum flow rating of 10 GPM @ 2250 PSI. This makes it ideally suited for practically everyone and so easy to use.

The is no risk of flying debris because there are no rotating cutters. Safe for use in populated areas and around vehicles. Operates from +110 degrees to -45 degrees which makes it ideal for ditch mowing as well as roadside overhanging brush cutting. Your driveways will never look the same when they have been cut with the Skid Sickle. This product is a Skid Steer Solutions exclusive product and is not available anywhere else.

The Skid Sickle segment bar is set up with an agressive cut pattern that allows it to shear material up to 2” is a single pass. This open design also allows you to increase your forward travel speed higher than an equivalent rotary style or flail mower. The segment bar is protected with a manual spring trip mechanism that will kick the bar back if you run into a stationary object. By simply rolling your tilt cylinders forward, the trip mechanism will reset.

The raising and lowering of the cutter bar is controlled by an electric over hydraulic solenoid and your hydraulic controls. You can raise and lower the cutter as needed and then continue to cut. Many of these have been sold to municipal governments and companies that contract to them because they are so safe to operate around people and valuables. This is a proven product that has stood the test of time.



Features:• Economically price replacement parts.• Field replaceable bolt on cutters.• High torque shearing mechanism.• Protective heavy duty guide bars.• Hydraulic drive and transmission.• Shearing bar is easily changed out quickly for constant

operation.• A proven design that has stood the test of time.• Backed by our no hassle 1 year warranty.

• Universal Skid Steer mounting.• 7’ or 9’ cutters available.• Electric over Hydraulic controls for blade angle.• 10 GPM @ 2250 PSI minimum requirement.• +110 - -45 degree cutting angles.• Plug and play option.• Hydraulic Lift/Angle cylinder.• Mechanical re-setable break-away bar.• Ships with flat faced SAE couplers.• Weight - 860 lbs.

Allied VibrAtory PlAte ComPACtor

Manufactured by one of the best Hoe Pack manufacturers in the USA, this product is an expansion to their proven line of compactors. Using the same technology that made Allied famous, the Skid-Pac Skid Steer Vibratory compaction plate is sure to please.

A plate compactor has many advantages over a roller style compactor. When working around parking lots, up against build-ings or against curbs, you are able to get closer. Visibility is also better to see what you are coming up against.

The design of this plate compactor features a large heavy 9 sq. ft. compaction surface. This is backed up by a powerful hy-draulic drive system with the eccentric bearing in an oil splash containment vessel. A four function valve block controls flow, pressure, regeneration and oil flow direction to make the most out of your hydraulics without causing harm to the powering mechanism.

This product is designed to fit any universal skid steer mounting system and run on a machine with output flow hydraulics rated at 15 - 21 GPM. The Allied Skid-Pac compactor ships complete with hoses and flat faced couplers.



Specifications:• Impulse Force - 8000 lbs.• Frequency 2000 VPM.• Plate Width 72”.• Plate Length - 18”.• Weight - 1200 lbs.• Direction of Travel - Forward or Reverse.• Drive - Direct Drive.• Manufactured in the USA using abrasion resistant, high

alloy strength steel for compaction plate 3/4” thick.

• Hydraulic Flow Requirement - 14 - 21 GPM @ 3000 PSI.

• Recommended for Skid Steer Loaders with a minimum 1300 lb. lifting capacity or larger.

• Ships with hoses and flat faced couplers.

Stanley Vibratory Plate ComPaCtor

When we started this project we knew that plate compac-tors had been used for years on excavators with success so rather than re-invent the wheel, we decided to utilize what already existed and use our magic to make it work on a skid steer. Our expertise is in creating great products with a lot of value added, so we had to make this attachment with the same WOW factor that so many of our other attachments have so we engineered some really cool uses for this item.

First and foremost it is a plate compactor. It delivers 3400 lbs. of force at a frequency of 2100 VPM over an area of 17.4” x 20”. Its uses include spot compacting as well as trench compacting. We recently filled a large trench for a water line and ran this machine down the trench after the spoils had been filled back in and it worked incredibly well. To run this machine is to feel the power, it really works and works hard for you.

Secondly, we have expertise in post pounding. These units

were used by the excavator guys for years to pound posts, so guess what we did? We have these cups already. Our standard post pounder cups will go right on so you can pound posts.

But that’s not all! Since these are universally adaptable, we added a quick coupler so you can connect this to the EH5000e backhoe boom which takes this compactor back to its roots, a boom mounted compactor. Using the EH5000e with HCS, you can hydraulically control the compactor and use the added reach to get closer to where it needs to be.

This compactor may also be removed from the skid steer plate and have any kind of coupler added to it so you can mount it on your excavator, backhoe or telehandler. Now that is value.



Specifications:• Centrifugal Force - 3400 lbs.• Frequency 2000 VPM.• Plate Width 17.4”.• Plate Length - 20”.• Weight - 525 lbs.• Direction of Travel - Forward or Reverse.• Drive - Direct Drive.• Manufactured using abrasion resistant, high alloy

strength steel for compaction plate 1” thick.• Hydraulic Flow Requirement - 12 - 25 GPM @ 3000

PSI.• Recommended for Skid Steer Loaders with a minimum

1300 lb. lifting capacity or larger.• Ships with hoses and flat faced couplers.

Vibratory Post DriVer

PVS-100 Vibratory Post Driver:When we started this project we knew that plate compac-tors had been used for years on excavators with success so rather than re-invent the wheel, we decided to utilize what already existed and use our magic to make it work on a skid steer. Our expertise is in creating great products with a lot of value added so we had to make this attachment with the same WOW factor that our other attachments have. We engi-neered some really cool uses for this item.

First and foremost it is a Stanley plate compactor. It delivers 3400 lbs. of force at a frequency of 2100 VPM over an area of 17.4” x 20”. Its’ uses include spot compacting as well as trench compacting. We recently filled a large trench for a wa-ter line and ran this machine down the trench after the spoils had been filled back in and it worked incredibly well. To run this machine is to feel the power. It really works and works hard for you.

Secondly, we have expertise in post drivers. These units were used by the excavator guys for years to pound posts, so guess what we did? We have these cups already. Our standard post pounder cups will go right on so you can pound posts.

But that’s not all! Since these are universally adaptable, we added a quick coupler so you can connect this to the E60 backhoe boom which takes this compactor back to its roots. A boom mounted compactor. Using the E60 with HCS, you can hydraulically control the compactor and use the added reach to get closer to where it needs to be.

Since the main mechanical components are made by Stan-ley, you know that you can trust the quality. With Stanley, all of the parts are in stock in Oregon.



Specifications:• Centrifugal Force - 3400 lbs.• Frequency 2000 VPM• Plate Width 17.4”• Plate Length - 20”• Cup Sizes 3”, 6”• Drive - Direct Drive Eccentric• Abrasion resistant, high alloy strength steel for com-

paction plate 1” thick


• Recommended for Skid Steer Loaders with a minimum 1300 lb. lifting capacity or larger.

• Weight - 525 lbs.

PD-550A & b Post Driver

The PD-550 Series of post drivers is ideally suited for Ski Steer Loaders. It has the perfect combination of weight and balance to allow the operator a very flexible means of driving posts in all conditions. The PD-550 uses a high impact 550 ft. lb. gas charged concrete breaker powercell with a specially adapted mount and cup. The power that the Impactor puts to the post is phenominal. Based on our popular S40 High Im-pact Breaker, the PD-550 harnesses this power to put posts where you need them FAST. The PD-550 utilizes a proven self contained mechanism that uses hydraulic pressure to compress nitrogen gas behind a piston. Once the gas is fully compressed, the piston fires causing the driver head to be forced into the post head. This force is both powerful, but also controlled so minimum dam-age occurs on top of the post. Our new universal eyelet cup keeps you from having to buy several cups. All of the cup sizes you need are supplied with our unique uni-cup system. Utilizing your existing tilt cylinder, you can alter the fore and aft angle. Our design works like a

dream. It should, it was designed by Skid Steer people for our Skid Steer Users.

For those wanting even more flexibility, the PD-550B utilizes a Bradco Tilt tach and electric over hydraulic control system to give the operator side to side tilt of 15 degrees in either direction.

Wait, there is still more. If you are working in really tough conditions, you can add a prick point to the driver that will al-low you to pre-punch a hole up to 3 feet deep through frozen or rocky ground We do not know of any other system com-mercially available that can do this.

And there is still even more. You can fully remove the eyelets to open the main driver up so that you can drive I-beams or steel casing. You can drive these items up to 11” in width. Casings require a custom cup cover as the driving head is only 8” in diameter.



Features:• Maximum Energy per Blow - 550 ft. lbs.• Required Flow - 12 - 21 GPM.• Operational Pressure - 1650 - 3000 PSI.• Blows per minute - 550 - 1250.• Driver Diameter - 8”.• Maximum Driver Cup Capacity - 11”.• Working Weight - PD-550A/900 lbs.• Working Weight - PD-550B/1300 lbs.

• Sound Level - 118 dB.• Finish - Black Hammerite Powder Coat.• Skid Steer Lifting Capacity Min. 1500 lbs.• Pre-Punch Available - Optional• Drives T-Posts - 11” I-Beam• Additional Eyelets Available.

Skid Steer rock Saw

This is one heavy piece of equipment. Designed for the harsh rigors of commercial applications, this machine is built to stand the test of time. Standard electro-hydraulic controls include depth and side shift controls. A steel heavy duty planetary drive delivers incredible torque. Protective shields protect hydraulic and electrical controls. Solid hardened steel wheels with greas-able manifold pins and protected grease zerks. This item comes with a 2 year manufacturer’s warranty.

Ships complete with hoses and 1/2” or 3/4” Flat Face Couplers.



Description BRS-18 BRS-24Overall Width 67Ó 67ÓOverall Transport Height 76Ó 81ÓMaximum Cutting Depth 18Ó 24ÓOperating Height - Guide Arm Down 39.5Ó 44ÓOperating Height - Guide Arm Up 49.75Ó 58ÓOperating Length - Guide Arm Down 119Ó 132ÓOperating Length - Guide Arm Up 77Ó 89ÓSide Shift - Center to Left 2.72Ó 2.72ÓSide Shift - Center to Right 24Ó 24ÓSpoil Removal Path 34Ó 34ÓWheel Diameter 48Ó 60ÓNumber of Picks 42 56Hydraulic Flow Requirement 31-33 GPM 35-39 GPMOperating PSI 2500-3000 2500-3000Weight Without Picks 1775 LBS. 2095 LBS.Operating Weight - With 2.5Ó Cutters 1995 LBS. 2385 LBS.Operating Weight - With 4.0Ó Cutters 2020 LBS. 2420 LBS.

Skid Steer roto-tiller

It was a long time coming, but due to customer demand, we finally have a Roto-Tiller. There are two models available. They are both identical, except for size. There is currently a 52” model with an overall width of 68 inches and a 68” model with an overall width of 79” as well as the new 76” version which is 87” overall. The overall size should be considered when choosing your tiller as you need to have space when tilling between your rows. If you are too wide, you just won’t make it.

Both tillers are bi-directional meaning you can till forwards or backwards. I usually run forward a few times to break up the soil and then the final pass will be backwards so you cannot see my tire marks. If you do not care about tire marks, then just till in the forward direction. The choice is yours. You reverse the motor just by the position of your auxiliary controls. It is just that simple!

The design is off-set so that the right side of the tiller will cover your right tracks leaving the ground in perfect tilled conditon and ready to plant. This attachment is designed to take the abuses that skid steer loaders deliver. It is not an agricultural at-tachment that has been adapted to a skid steer plate like so many others are. The motor, seals and hoses are rated for skid steer type pressures while the frame, carrier and drive is designed to take a beating and still deliver results.

Roto-tillers are great for gardens, breaking sod and preparing new yards for seed or sod. Their effectiveness for breaking up solid ground is unmatched. They can create finished projects that you will swear has been done by a professional. Only you will know who accomplished the amazing results with little effort.



Features:• Overall Width 87” - Usable Width 76”• Overall Width 79” - Usable Width 68”• Overall Width 63” - Usable Width 52”• Working Depth - 6” Maximum• Tine Rotation - Bi-Rotational• Direction of Travel - Forward or Reverse• Number of Tines - 42• Drive - Direct Drive

• Manufactured in the USA using abrasion resistant, high alloy strength steel for minimum weight and maximum durability


• Weight 450, 540, 630 lbs.• Recommended for Skid Steer Loaders with a minimum


Skid Steer Sand Bagger

Cut your labor and time to seconds when filling sand bags. The Speed Bagger is a skid steer mounted sand bagging machine that runs off your existing auxiliary hydraulics. You can scoop the sand into the bagger and fill bags without ever leaving your machine. Two people are needed to load bags, but that is it. If you are in need of a lot of sand bags fast, then this is your tool.

Ships with hoses and flat faced hydraulic couplers.



Features:• Fits all Skid Steers e/w Universal Quick Tach Adaptors.• Scoop sand directly from ground into Speed Bagger.• Auger drive insures fast filling with all types of sand.

Replacement HydRualic Block

Saturn Hydraulic Connection Block:This block was created to directly correct the deficiencies seen in the Faster brand block which is installed on most modern Bobcat Skid Steer Loaders. You can simply remove your existing block and screw this one directly in it’s place. On machines where you would like a remote connecting block, this can be fitted also. Many of our attachments with remote options will have this block installed.

Why change out the Bobcat Hydraulic Block?If you have ever damaged a fitting, you will know why. Bobcat treats their fittings like gold and demands a heavy price for them. Their fittings are no better than these. They just have multiple levels of mark-up added to them. Actual cost to produce poppets off-shore is around $5. Why pay $120 or more for the same item?The pressure relief is hard to use and does not relieve all of the pressure from the lines of the attachment.The Saturn block uses simple replacement fittings that are high in quality and low in price. Less than $35 per fitting and

you are back in business. Bobcat charges over $120.

The pressure relief on the Saturn block uses a simple lever that you pull out and move up and down. The pressure is fed back into the case drain line which holds no pressure. This insures that you can relieve all of the pressure in your lines which makes for an easy connection.

The Saturn block may also be mounted to older machines which do not have a proper connecting block for their hydraulics. You will need to add a case drain in many of these installs, but it is worth it not having to wrestle with your couplers any longer.

What is a CASE DRAIN?A Case Drain is a return line that goes directly back to your reservoir tank for your hydraulics. It is used as a drain point back from some attachments. It is the ideal return for coupler draining because many times your lines will hold pressure even when the machine is turned off.



Features:• Couplers installed are 1/2” Male and Female flat face.• Male 3/8” case drain• Unique pressure relief valve completely drains both

pressure and return couplers.• Directly replaces Faster block on modern Bobcat load-

ers.

Skid Steer CoverS

Equipment Caps are designed to fit your Skid Steer Cab and protect it from the elements, environment and critters. You spent a lot of money to buy your machine so why not protect the cab when you are not using it. A few dollars spent today will keep your cab looking and smelling a whole lot better over the long run. This is one of those small investments that will pay you back over and over on a daily basis.

Equipment Caps are made of Odyssey III™ impregnated woven polyester fabric. Reinforced on the top corners and attached directly to the machine by grommets and industrial strength bungees; When not in use it can be easily folded and tucked away in our storage bag that is provided with each cap.

Each Cap has strategically placed grommets and comes with bungees to secure the cap to your machine. The material is lightweight but extremely strong to withstand the abuse it will surely endure in the construction environment. The thread is heavy duty and UV resistant to survive the elements that come along with year round outdoor storage.



Features:CASECS3R - Fits Case machines with radius cabs, Series 3 Machines.CST - Fits T series machines with square cabs

CATCTR - Radius cab machinesCTS - Square cab machines

BOBCATBCG - Generic cover, fits all Bobcats TAKEUCHITK34R - Fits Series 3 and Series 4 machines; with radius cabsTK5R - Fits series 5 machines with radius cabs NEW HOLLANDNHG - Generic cover, Fits all New Holland machines

Skid Steer Stereo SyStem

Enjoy music in your cab. If you are anything like us, you enjoy your music while you work. It is great to run a machine, but even better with Tunes. We are offering this item in response to our own needs. We enjoy our music so much that we figure you will too.The DEH-2900 Pioneer is a 50watts x 4, 200 total watts mosfet* CD player with AM/FM tuner with 3 band equalizer.

This is not just 200 watts; this is MOSFET 200. Compared to conventional power supplies, the MOSFET amplification circuit is smaller and more efficient, and it delivers power with less distortion and absolutely zero on/off switching noise. Remember: more power doesn’t only mean “louder”. It also means that your music will be cleaner at higher volumes because you’re not pushing the limits of the amplification circuit



Features:• MP3/WMA/MAV playback with volume and memory

settings.• Connect your portable devices directly through the

front AUX input.• Satellite Radio Ready for XM or Sirius.• iPod Adapter Ready (CD-IB100II Required).• Card Remote Control.• Detachable Face Security.

FFC Snow Blower HigH-Flow

FFC High Flow Snow Blowers are known as the Cadiallac of the industry. They are designed with the operator in mind and provide all of the features you would expect from a commercial piece of equipment.

FFC High Flow Snow Blower Features:• Two stage hydraulic blower throws snow up to 45ft.• Electronic or electro/hydraulic poly-lined chute• anddeflector.• Reinforced wrapper makes it one of the toughest Snow Blowers in the industry.• High-volume 36” shroud opening• Provides excellent visibility• Replaceable wear-resistant Pacal steel tapered wear edge• Skid shoes are adjustable and replaceable.• Attaches quickly to most skid-steer loader brands

IMPORTANT:Allreplacementhydraulichosesandfittingsmusthaveaminimumratedworkingpressureof4000psi.Hosesand hydraulic couplers from the attachment to the loader are included for skid-steers only.



Model LAF6774F LAF6774G LAF6774H 11009F 11009G 11009H LAF6786F LAF6786G LAF6784H LAF6798G LAF6798HWeight 1150 lbs. 1160 lbs. 1160 lbs. 1200 lbs. 1200 lbs. 1200 lbs. 1230 lbs. 1240 lbs. 1240 lbs. 1320 lbs. 1320 lbs.Cutting Width 72Ó 72Ó 72Ó 78Ó 78Ó 78Ó 84Ó 84Ó 84Ó 96Ó 96ÓCutting Height 36Ó 36Ó 36Ó 36Ó 36Ó 36Ó 36Ó 36Ó 36Ó 36Ó 36ÓDepth 43Ó 43Ó 43Ó 43Ó 43Ó 43Ó 43Ó 43Ó 43Ó 43Ó 43ÓHeight 74Ó 74Ó 74Ó 74Ó 74Ó 74Ó 74Ó 74Ó 74Ó 74Ó 74ÓAuger Motors Single Dual Dual Single Dual Dual Single Dual Dual Dual DualAuger Diameter 18Ó 18Ó 18Ó 18Ó 18Ó 18Ó 18Ó 18Ó 18Ó 18Ó 18Ó

Fan Diameter 26Ó 26Ó 26Ó 26Ó 26Ó 26Ó 26Ó 26Ó 26Ó 26Ó 26Ó

PSI Range 2500-3500 2500-3500 2500-3500 2500-3500

2500-3500

2500-3500 2500-3500 2500-3500 2500-3500 2500-3500 2500-3500

GPM Range 22-34 19-34 30-42 22-34 19-34 30-42 22-34 19-34 30-42 19-34 30-42Hose ID 3/4Ó 3/4Ó 3/4Ó 3/4Ó 3/4Ó 3/4Ó 3/4Ó 3/4Ó 3/4Ó 3/4Ó 3/4Ó

FFC Snow Blower low-Flow

FFC Low Flow Snow Blowers are known as the work horse of the industry. They are designed with the operator in mind and provide all of the features you would expect from a commercial piece of equipment.

FFC Low Flow Snow Blower Features:• Two stage hydraulic blower throws snow up to 45ft.• Electronic or electro/hydraulic poly-lined chute• anddeflector.• Reinforced wrapper makes it one of the toughest Snow Blowers in the industry.• High-volume 25” shroud opening• Provides excellent visibility• Replaceable wear-resistant Pacal steel tapered wear edge• Skid shoes are adjustable and replaceable.• Attaches quickly to most skid-steer loader brands

IMPORTANT:Allreplacementhydraulichosesandfittingsmusthaveaminimumratedworkingpressureof4000psi.Hosesand hydraulic couplers from the attachment to the loader are included for skid-steers only.



Model LAF6748A 11005C 11005D 11005E 11006D 11006E 11008D 11008E 11007D 11007EWeight 490 lbs. 650 lbs. 650 lbs. 650 lbs. 685 lbs. 685 lbs. 703 lbs. 703 lbs. 720 lbs. 720 lbs.Cutting Width 48Ó 60Ó 60Ó 60Ó 72Ó 72Ó 78Ó 78Ó 84Ó 84ÓCutting Height 25Ó 25Ó 25Ó 25Ó 25Ó 25Ó 25Ó 25Ó 25Ó 25ÓDepth 38Ó 38Ó 38Ó 38Ó 38Ó 38Ó 38Ó 38Ó 38Ó 38ÓHeight 57Ó 57Ó 57Ó 57Ó 57Ó 57Ó 57Ó 57Ó 57Ó 57ÓAuger Motors Single Single Single Single Single Single Single Single Single SingleAuger Diameter

14Ó 14Ó 14Ó 14Ó 14Ó 14Ó 14Ó 14Ó 14Ó 14Ó

Fan Diameter 18Ó 18Ó 18Ó 18Ó 18Ó 18Ó 18Ó 18Ó 18Ó 18ÓPSI Range 1800-2500 2000-3000 2000-3000 2000-3000 2000-3000 2000-3000 2000-3000 2000-3000 2000-3000 2000-3000GPM Range 8-13 12-25 14-21 18-27 14-21 18-27 14-21 18-27 14-21 18-27Hose ID 1/2Ó 1/2Ó 1/2Ó 5/8Ó 1/2Ó 5/8Ó 1/2Ó 5/8Ó 1/2Ó 5/8Ó

medium size snow Buckets

Skid Steer Medium SIze Snow BucketsThese buckets are sized for the mid-class machines that can lift from 1750 lbs. to 2200 lbs.

Skid Steer Snow Buckets need to be built with two things in mind. They need to be light enough to allow the operator to pick up as much snow as possible, but with enough material to keep them from falling apart or wearing out too quickly. We believe we have achieved just the right combination of weight and quality materials to bring you an awesome bucket. Check out the grid for comparisons between the different sizes and styles. It is best to have these buckets wider than your machine so that you can clear next to curbs without scraping your tires up against it.

Our buckets accomplish both requirements easily. Snow buckets are not a single season product any longer. Most loaders can easily be used along with a snow bucket to load light materials such as hog fuel, bark mulch, leaves or pea gravel. Even if a full bucket is too heavy for your machine, you can easily half load the material and insure that you do not spill anything while you travel to the final destination. This makes these buckets a must for all lanscapers as it is a multi season prodcust that will pay you back over and over with all of the uses.

Bolt-on cutting edges available.



Model Height Depth Width Inside Stiffeners Wrapper Sides Wear Bars Weight Heaped Capacity

MMSB-84

30Ó 41Ó 84Ó 1/2Ó 3/16Ó 3 x 1/2Ó 755 lbs. 37.40 cu/ft

MMSB-96

30Ó 41Ó 96Ó 1/2Ó 3/16Ó 3 x 1/2Ó 845 lbs. 42.70 cu/ft

MMSB-101

30Ó 41Ó 101Ó 1/2Ó 3/16Ó 3 x 1/2Ó 925 lbs. 44.90 cu/ft

mega size snow Buckets

Skid Steer Mega Size Snow BucketsThese buckets are sized for the large-class machines that can lift from 2200 - 3700 lbs. They are extra big. The venting is to give you visibility. Without it, you could not see your bucket edge or even where you are going.






Model Height Depth Width Inside Stiffeners Wrapper Sides Wear Bars Weight Heaped Capacity

MSN-84 37Ó 42.5Ó 84Ó 1/2Ó 1/4Ó 3 x 1/2Ó 850 lbs. 1.68 cu/ydsMSN-96 37Ó 42.5Ó 96Ó 1/2Ó 1/4Ó 3 x 1/2Ó 905 lbs. 1.90 cu/ydsMSN-101 37Ó 42.5Ó 101Ó 1/2Ó 1/4Ó 3 x 1/2Ó 995 lbs. 2.04 cu/yds

Standard Size Snow BucketS

Skid Steer Standard SIze Snow Buckets

These buckets are sized for the small - mid machines that can lift from 1000 - 2200 lbs. They are like a basic bucket but a little oversize. They are lighter construction with reinforcement in just the right place.






Model Height Depth Width Inside Stiffeners Wrapper Sides Wear Bars Weight Heaped CapacitySP-60 26.50Ó 37Ó 60Ó 1/2Ó 3/16Ó 3 x 1/2Ó 535 lbs. 22.25 cu/ftSP-66 26.50Ó 37Ó 66Ó 1/2Ó 3/16Ó 3 x 1/2Ó 570 lbs. 24.50 cu/ftSP-72 26.50Ó 37Ó 72Ó 1/2Ó 3/16Ó 3 x 1/2Ó 610 lbs. 26.50 cu/ftSP-78 26.50Ó 37Ó 78Ó 1/2Ó 3/16Ó 3 x 1/2Ó 645 lbs. 28.75 cu/ftSP-84 26.50Ó 37Ó 84Ó 1/2Ó 3/16Ó 3 x 1/2Ó 680 lbs. 31.00 cu/ftSP-90 26.50Ó 37Ó 90Ó 1/2Ó 3/16Ó 3 x 1/2Ó 715 lbs. 33.00 cu/ftSP-96 26.50Ó 37Ó 96Ó 1/2Ó 3/16Ó 3 x 1/2Ó 770 lbs. 35.25 cu/ft

Skid Steer Snow ChainS

Snow Chains for Skid Steer Tires:Our snowchains are designed specifically skid steer loaders. They are not a car chain made in longer lengths. When you buy a commercial chain, you get thicker links, heavier connections and a much more robust design. We offer 2 designs for your applications as required.

4 Link Design:The main side chains are identical to 2 link, but the cross chains occur at intervals of each 4 side links. This is a nice all around chain for parking lot clearing and the open road. Only one set is usually used on parking lots to minimize the amount of scraping damage that can occur.

2 Link Design:The main side chains are identical to 4 link, but the cross chains occur at intervals of each 2 side links. This makes the chain much more aggressive as there is never a point where there is not chain in contact with the ground. It offers great ice traction and more forward pushing power than the 4 link chain. It can cause more damage to parking lots if you are skid turning alot. One set works great for forward pushing. 2 sets would make the most aggressive pushing and climbing machine you can have on the snow. It also offers the best downhill traction and safety you can get on a tired machine.

Many people try to add tracks to their machines to gain more traction in the winter. This is not needed and a waste of money. Good old fashioned chains do a great job and are much more cost effective.



Features:• Skid Steer Rated for the worst conditions.• Square Link Design for better traction - Non-Twisted.• 4 Link Spacing provides a cost effective means of

providing traction.• Alloy Steel - Manganese/Molibdenum/Zinc ensures a

long lasting product.• 8mm Wire diameter - (Link Thickness).• Sized for all of the skid steer tread designs in this size

range.

• Available in sizes for tires measuring 8”, 10”, 12”, 14” & 15”.

• 2 Link and 4 link designs available.• Buy 1 set for the rear tires if you are just pushing snow

on flat terrain.• Buy 2 sets for hilly operations where front traction is

required for downhill safety.

eterra grip studs

eTerra Grip Studs:Finally a solution for your winter traction needs. eTerra Grip Studs are designed specifically for heavy equipment. Many people have tried for years to use screws or ice racing studs on there skid steer loaders and CTL machines just to get some kind of temporary traction. The results have been mixed.

The hardest thing to overcome is wear. Screws just are not hard enough to last any time at all and when they wear out, they are stuck in your tire. With no head on them, they will work their way into your tire and eventually pop it.Ice racing studs work for a while but have small carbide inserts that just do not last. Their cost is similar to our price, but the actual amount of carbide is much less. You may as well just buy a product that is made the way you need it.

Grip Studs use a screw in design with a hex head that extends down past the carbide. As the carbide wears, you are still left with a head to remove and replace the studs

when needed. This will be a very long time just because of the amount of wear that these studs are designed to take.

Some Grip Studs have achieved 600 hours and can still be removed and used again. Now that is value!

Insertion is easy using just a powered screw driver and the supplied tool. Removal is just as easy. You will find that you can get more than one season out of these studs as they are completely reusable.

When ordering, please specify your tread depth and we will choose a stud length that is right for you. The standard length that we ship is 30mm. This gives you 1 inch of tread penetration. Make sure you have enough tread to accept a stud this long.

It is the customers responsibility to measure the correct depth or you may damage your tires.



Basic Installation Rules: Never fit a stud that is too long for the tread depth, i.e. an 18 mm stud requires a 17 mm tread depth. 3 mm of the stud should be raised above the tire surface, which gives a margin of 2 mm down to the cord. The thickness of the cord varies between 4 and 20 mm depending on the tire type. To achieve optimal results, count the number of contact patches on the tire and make a strategy for fitting the studs. If unsure, choose a shorter stud model. There are 2 sizes to fit various tread depths. We are currently stocking

only 30mm studs as they are the heaviest duty for this application. Other sizes available upon request.Grip Studs are easily fitted and dismounted with a special installation tool that is supplied ith the product. Initially, the tool is set to the basic setting to provide a 3 mm projection of the stud above the tire surface. The projection may vary depending on the resistance of the rubber; in some cases the tool must be reset. Learning how to fit the studs is easy. In order to dismount the studs, the special tool is adjusted backwards.

HDS SerieS Snow PlowS

HDS- Heavy Duty Series Skid Steer Snow Plow

For those users who demand the best in their equipment we have the HDS Series of snowplows. What sets this product apart from the rest? Here is a list.

Features:

• Stainless Steel Mold Board resists rust due to scratches and wear• Reversible Bolt-on cutting edge 8” high, 3/4” Thick (Hardened)• TripFeatureprotectsthesurfaceincasetheoperatorrunsintoacurborfixedobject• Shock Absorbers eliminate the blade from snapping back when the blade trips• Powder Coated Frame• Side Steps• HydraulicAngleadjustmentallowsyoutobladeineitherdirectionanddeflectthematerialtoonesideortheother• AdjustableSkidShoesreducebladewearandgravelremovalwhenplowing• Fullfloatingpivotpointallowsthebladetofollowunevencontoursontheroadsurfaceleftorright.Thiskeepsmoreofthe

blade in contact with the road surface and makes for a cleaner plowed surface.• Flow restrictors used to keep blade from slamming back and forth.



Specifications:• 84” - 715 lbs. Angled Width = 71.5”• 96” - 768 lbs. Angled Width = 81.6”• 108” - 814 lbs. Angled Width = 91.8”• 120” - 848 lbs. Angled Width = 102”• Blade Height - 32”• Blade Material - 3/16” Stainless Steel

Switchback Snow PuSher

SBP Snow Pushers - The Switchback:Sometimes a Snow Plow is just not enough. Sometimes, there is just too much snow and you have to move it far and move it fast. If you are one of those people that were stuck out in the cold last season with an abundance of snow and you just could not get rid of it fast enough, then this is the product for you. Built to the highest of quality standards, this is surely going to be an item you will use for years and years. The standard unit ships with the main snow pusher, a steel backed rubber main cut-ting edge, a pull back with replaceable steel cutting edge. This unit will of course fit all of the standard skid steer loaders plus we can make custom mounts for these if you have the time.

We used the heck out of one of these during our 2008 storms. It was great for clearing the lot and then taking the large plies of snow and pushing them up and over each other along the sides of our parking lot. We also were able to get into our door-ways and pull the snow away from them. This saved us a ton of hand shovelling. This is truly an underestimated attachment.

Please check your loader capabilities before ordering. You can push a lot of snow with one of these. If you are working with wet heavy snow, your capacities will be less. Light snow means more snow capacity. Check out our chains if you have trac-tion problems.

Our snow pushers fit Skid Steer Loaders like Bobcat, Caterpillar, Thomas, New Holland, John Deere, Case Bulldog, Daewoo, JCB, Mustang, Takeuchi, Komatsu, Shinheung, and Hyundai skid steer loaders.



Specifications:• Sizes - 96”, 120” & 144” .• Rubber cutting edge - 1-1/2” thick.• Adjustable pusher section with optional wings from 8” -

144”. • Weight starts at 950 lbs. for the 96” model.• Replaceable cutting edges on base and pull-back kit.• Adjustable and replaceable skid shoes.• Powder Coat Finish.

Side diScharge Spreader

The unique design of our material spreader allows you to scoop and spread material to the side without ever leaving the com-fort of your cab. With the bucket/hopper combination, one scoop and you are ready to go! The adjustable speed auger moves material to the hopper opening where it drops on to a bi-directional conveyor belt with molded flighting. Material is not stored on the belt which can prevent the belt drives from spinning. The material stays in the hopper unit until it’s time to go, saving wear and tear on the conveyor.

FeaturesSelf Loading: Bucket design allows you to scoop and goBi-Directional: Discharges material to either sideAdjustable Auger Speed : Adjust by engine RPM & Hydraulic ValveAdjustable Belt Speed: Adjust by engine RPMOpen Concept Drives: Conveyer drives are designed so material will not get between drive and beltHigh Centered Drives: Keeps belt running in the middleOperates on Standard Flow Rates: 2 GPM - 20 GPMDurable Design: Powder coating, motor guard, and moreEasy to Maintain: Conveyor assembly removes as a unit (4 bolts, 2 hoses) for fast, easy bench serviceStandard Mount: Universal Skid Steer Mount.Case Drain: Device to reduce back pressure on return lines



Specifications:• Sizes Available - 60” & 70”• Hopper Capacity:• 60” @ 26.14 cubic ft (less than 1 cubic yd)• 72” @ 31.70 cubic ft (greater than 1 cubic yd)• Weight 60” - 825 LBS.• Weight 72” - 910 lbs.• Will Spread Sand, Sawdust, Wood Shavings, Peat

Moss, Topsoil & Gravel up to ¾” clear/1” wash stone.

SS Material Spreader

SS Sand, Salt, Seed & Fertilizer SpreaderThe SS series of spreaders is a 60” or 72” hydraulically driven sand, salt, seed and fertilizer spreader complete with a univer-sal quick attach for most skid steer loaders. It uses a manually adjustable gate valve as standard. A hydraulcally controlled gate valve is available as an option. A hydraulic auger and spreader runs from the auxiliary flow of your skid steer and can spread material from 4.5 ft. - 12 feet depending on the flow rate chosen.

The only options are the hydraulic couplers for your machine and the manual gate valve can be changed to a hydraulic con-trol. This is generally not needed unless you are using Calcium Chloride which flows very easily.

The really nice thing that we like about this spreader is that it is built tough enough to allow you to scoop the material up with the attachment. You do not need to hand load this spreader. For heavy users this is ideal. It does cost more than our value priced spreaders, but it makes up for it with the time you save and the extra productivity that you will achieve when using this spreader. It is also a multipurpose spreader meaning that it has both a gate control and auger so any type of material can be loaded without fear of it spilling out through the bottom of the chute.

Use it to load sand, salt or potassium chloride without fear of clogging.

Note: Product must be dry and not be frozen hard into a lump or you can damage the auger drive.



Specifications:• Required Auxiliary Flow - 2 - 20 GPM• 26.14 Cu. Ft. Capacity• Spread Pattern from 4.5 ft. - 12 ft. depending on en-

gine rpm• Stainless Steel Gate Valve allows manual adjustment

of material flow. Hydraulic option available.• Adjustable auger speed• Durable long lasting design - T304 Stainless Steel

Spinner

• For use on dry material only• Electrostatic Powder Finish

Stumper 280

There are two models of the Stumper 280. The low flow model is designed for Skid Steer Loaders with Auxiliary Flow Hydraulics rated between 16 GPM to 25 GPM @ 3000 PSI, while the High flow model is designed for machines rated between 26 GPM and 40 GPM.

The Stumper does away with a lot of the issues attributed to regular stump grinders. It is EZ to use and that is what counts. Landscapers can use this to go in and grind stumps into the ground with very little ground disturbance. It has a 28” grinding wheel with 13 re-sharpenable and replace-able carbide bladed teeth that make fast work of any type of stump. It has a spring loaded full floating chassis that pro-tects you from putting too much pressure on the unit which ensures maximum efficiency when grinding. If you still try to overload it, it features a bypass circuit so you cannotdamage the machine.

The Stumper weighs in at 650 lbs. and is extremely well built.

With this unit, you will be able to grind stumps down into the ground with little effort. With the ease of use and the com-pactness, you will be able to access the smallest of proper-ties and grind stumps quickly. It can even take down small trees and grind the stump at the same time. With full potential you will be able to make a lot of money with our grinder.

Our cutting force regulator prevents overloading of the car-bide tipped cutting wheel, ensuring that grinding never stops. The Stumper can consume a 12-inch stump in minutes. Got a stump that is hard to get at? The Stumper can grind stumps within 6-inches of buildings or fences. Once installed on your skidsteer, our Stumper can grind a stump anywhere your skidsteer can reach. The Stumper requires no electrical con-nections and uses only standard accessory hydraulics.

Please specify when ordering what your flow rate is. Excava-tor, Backhoe and skid steer mounts available and this unit can be field swapped in just minutes to these different mounts.



Features:• Universal Skid Steer mounting.• 28” grinding Wheel.• 13 sharpenable and replaceable carbide bladed teeth.• Low Flow Range - 16 - 25 GPM @ up to 3000 PSI.• High Flow Range - 26 - 40 GPM @ up to 3000 PSI.• Ideal Rotational Speed - 325 - 600 RPM.• Finish - Powder Coat.• Weight - 650 lbs.

Tele-Boom

Why choose a Tele-Boom? It is the original product tried and true with an OSHA rating. All others are just poor imitations of the original. When you are lifting objects 30 feet in the air, you want to know you are working with equipment built by profes-sionals. The Tele-boom is the one and only high lift boom that we could ever recommend.

The Tele-Boom T100 is recommended for skid steer loaders with a lifting capacity of 1750 lbs. or less. It is identical to the T200 except it uses thinner wall tubing to make it lighter. This lighter weight allows you to pick up more weight with the boom before your machine tips over. So you see, in this case lighter duty is actually better. The lift rating is still over 1000 lbs. which on a 1750 lb. lift machine is much greater than you could actually lift. The 1000 lb. capacity is measured when the boom is fully extended to 20 ft. You can of course pick up more weight with the boom swept back to 8 feet.

The boom comes complete with all of the hydraulics and even a really nice Truss Hook. This product is supplied with 1/2” flat faced couplers and 2 x 60” hoses. Options include a Plywood Sheet Carrier and Pallet forks.

This is an extremely useful attachment to have on a job site. We use this attachment quite regularly and stand behind the quality and performance.



Specifications:• Retracted Length - 8’6”.• Extended Length - 20”.• Hydraulic Requirements - 4 GPM @ 600 psi..• Requires only 1 hydraulic circuit.• 2 x 48” Tie Rod Cylinders.• Completely Assembled Extends to 30’ with combined

lift height of skid steer Lifting capacity depends on skid steer weight, wheel base and lifting capacity as well as

lifting angle. • Weight tables available upon request.• Weight T-100 - 600 lbs.• Weight T-200 - 705 lbs.

Terra BiTes

Terra Bite Traction Cleat for Large track Compact Track Loaders:Many repeat customers now are proof that this product is a winner. This is a really cool item that will completely change how you use your track loader. We are up in Washington and in the 11 months it rains here, our T-Series Bobcats become useless in the mud. There is simply just not enough traction. It was only a matter of time before someone designed a cleat for rubber tracks that could easily be removed.

How do they work?Terra Bites use your existing track and add to the functionality of your machine by providing the operator with deep mud, snow and ice traction. This is simply unheard of in today’s market. There is nothing currently available that can do this easily. The forged cleat can be added and removed from your existing track with an impact wrench in just moments. They are designed to grip inside the existing tread of your Bobcat style track. This provides a sure fire method of connection that is strong and simple. Each cleat has an inner and outer bolt. Simply unbolt the cleat and slide over your track. Tighten the bolts down to pull the cleats together and lock them in place on the tracks.

It just cannot be any easier!

They will not damage your tracks because they lock into your your existing tread. Any wear that cann occur is on the tread and not the track bed.



Features:• Fits all Bobcat 450 mm or 18” C-Channel Rubber

Tracks.• Cast material makes them as tough as it can get.• Will not damage your tracks.• Adds incredible traction not available with any other

product. • Integrated ice cleats.• Weight 23 lbs.per unit

Power TilT Tach

This is a heavy duty adaptor plate that exceeds the strength ratings of anything else commercially available. Believe it or not, Tilt-Tachs take a beating and need to be well built or they will not last.

This is an update of our original tilt tach that offers more of what you need at the same price. The great thing about Tilt-Tach’s is that you can add them between almost any attachment and make the attachments much more useful.

Some uses for this include:• Cutting a sidewalk into a sidehill.• Angle cutting small swail ditches.• Grading on sidehills.• Coning a road for drainage.New Features:• Sturdier boxed frame design• Handles close to the inside with heavy snap latch keeps mechanism from opening during use• Top is closed with rubber seal to keep dirt from entering mechanism• Compatible with our HCS control system• Pressure volume controlled so it actuates slowly and concisely



Specifications:• Rotates 15 degrees in each direction.• Universal Adaptor Mounting.• Made from A50 American Steel.• Outer grips mounted as far outside as possible to in-

crease strength and dependability.• Hydraulic control requires only one circuit to operate.• Weight - 380 lbs

Tire TyTe Tire SealanT

TireTyte Tire Sealant:This is a product that everyone can relate to. Puncture proof your skid steer tires so your machine keeps going through thick and thin. With the optional pump you can easily put the exact amount of Tiretyte into your tires easily and quickly.

What can Skid Steer Tire Sealant do for you?Here is my story. I started Skid Steer Solutions in the Pacific Northwest. It is no secret that it rains a lot. I designed my first set of tracks in 1993 and started running them for 9 months out of the year because it is just so mushy around here and I could not stand getting stuck.

Well that was one challenge that I easily took care of, but what happened next was a surprise. My tracks would have a tendency to take a nail and push it farther into my tire than if I would have just ran over it. In fact, one time my tracks pushed the bottom of a beer bottle right through my tire. What happened next was the air quickly left my tire while I was

cab deep in the mud. I could not feel the air leaving until it was too late and my tire was flat, the bead was broken, and my tracks were wrapped around my axle. To make matters worse, with the bead broken, the tire filled up with mud. This was a project that took me hours to get out of. If I would have known about a product like this, I would have spent the money and never given it another thought.

I have used tire sealants in the past but only on small tubes. I was very skeptical but I am now a converted believer. In fact the manufacturer has so much experience with this that we are posting many customer testimonials from many years of use.

A 5 Gallon jug will treat a total of 10 tires sized 10 x 16.5. This works out to $29.50 per tire. This is an investment you cannot afford to miss. What does a flat tire really cost you?



Features:• Ships in a 5 Gallon resealable container.• Extra thick mixture insures a quick seal.• Does not clump, but will continually move inside your

tires to make sure it plugs leaks.• Optional pump available.

Flat prooF tires

Terra-Tires: 10” & 12” Flat Proof Tires:This is one of those products that once you try, you will al-ways own. There are so many good things about this style of tire, they are simply incredible.

Imagine never getting a flat again when working on a custom-ers property? What about getting a flat with tracks installed? Your down time to repair will wipe out most of your day. This is time that you could be charging for.

How about lifting capacity? You can lift more due to the higher rating of these tires as well as the extra ballast that they provide.

Tracks: If you were just about to add tracks to your machine and needed wheels spacers, well you won’t need them with Terra-Tires. They use a 60/40 offset so you can flip them over for more clearance.

This is our design. Others may look similar, but they are not

the same. What we did on our own tires, was to increase the side wall thickness so that the tracks rode with only a small amount of side to side slippage. This keeps the tracks from riding over and scratching your frame and also protects the side of the tread from being torn off by the edge of the track.

Our wheel size is similar to standard pneumatic wheels. This means that the area normally filled by your sidewall is filled with rubber. Our unique honey comb system gives the tires added cushioning. This cushioning effect has been engi-neered to have a similar feel to pneumatic tires. You get the best of both worlds. An air ride feel, but without the risk of a flat tire.

Terra-Tires have added rubber under the tread and brought the sidewall out to support the base of the tread better. This also makes the tires run better with over the tire tracks which could actually pull the edge of the lugs off because of lack of support. Look at the features and compare. There is no tire anywhere that is better.



Features:• No downtime due to flats, sidewall cuts, deflations• No wasted time and money repairing damaged tires

(What does it cost you when your employees have to stop working to go and repair a flat tire?)

• No tire pressure to pay attention to, as Terra-Tires are mainentance free.

• No worries about damage from attachments • Shock absorption for a smooth ride for the operator

and machine longevity.

• Higher load capacity than standard pnuematic tires• Less weight than foam filled tires which means you use

less horsepower to drive your wheels• Sidewall wear is completely eliminated• Resistant to cuts and snags• Weight rating - 7700 lbs. per tire - 10”• Weight of 4 tires - 1050 lbs.• 10”, 12”, and 12” for A300

2Plus Tracks

2Plus tracks are a solid steel pad track with solid steel side bars. They are manufactured as a formed product and then hardened to Rockwell “C” 48 - 52. This is a level of hardness never thought possible. It makes them 50% lighter but just as durable asother commercially available tracks. Using alighter track provides power train load reductionswhich helps the longevity of your machine.

One person can install them in less than 20 minutes due to their lighter weight. Less weight leaves more horsepower to put to the ground instead of trying to turn tracks.

With their high sides and deep tapers, thesetracks will not come off. They are extremely easy to get on and off. Each set of tracks is shipped with an installation tool which helps with installation and tightening. Each pad is removable and replaceable should you damage one beyond repair.

2Plus tracks are great for the operator that wants traction with flotation and needs to be able to cross over driveways without damaging the finish.

These can be run on machines up to 90HP and are designed to last around 1000 hours. You cannot go wrong with 2Plus tracks.



Features: Stamped, formed and hardened to RC 39-41. Grade 9.• Shoulder bolts are 5/8” & Fine Threaded.• Available in 10” & 12”, 12” Narrow & 14”.• Raised inner guide for increased tire grip.• Adjustable links to increase or decrease track length to

match your machine.• 1 Year Warranty against defects.• Parts are replaceable if damaged.

• Installation tool supplied.• High contoured sides eliminates the risk of the tracks

coming off during use.• Great for the muddiest of conditions.• Light weight but tough.• Easy to install.

eterra rite tracks

eTerra Rite Tracks - Rubber Tracks System:This is just about the most configurable and long lasting track system available today. The design of the track has been available for over 8 years on other types of equipment. It took eTerra and Skid Steer Solutions to bring the tracks to market and make them available for skid steer loaders.

The only rubber tracks system that be operated year round in the following conditions:• Snow• Ice• Mud• Perma-Frost• Logging Operations• On and off Road Side• Home Owner Landscaping• Extreme Side Hill Operations - They do not come off.• Heavy Weight Projects - Steel Guides Insure the track is

not torn apart.• Sidewalk and Driveway operations

Optional configurations are:• Snow Cleat Assembly.• Deep Mud Cleats.• Wider widths for higher floatation.• Mixed assembly. Good for varying conditions.

There is simply no track available today that has all of the features of Rite Tracks. The design is bullet proof and so flexible for so many operations, it is just amazing. All of the cleats, joints and guides are replaceable. This makes the long term wear aspects of the tracks to be much greater than any other track. All rubber track systems suffer from failure issues that will cause the tracks to be unusable. Rite Tracks do not have this issue. Break a part. Change it and move on. Now that is value.



Features:• Virtually no tire wear because tires do not touch rubber

track.• Completely repairable and rebuildable.• On-site configurable. Snow Cleats, Mud Cleats and

regular cleats can be interchanged.• Heavy Duty 3 Ply Belting outlasts treads by thousands

of hours. • 1500 PSI belting minimum.• Steel tire guides are tall and keep tires from rolling out

in the most extreme side hill operations.• Complete drive system can be replaced in the field.• Available in sizes for 8”, 10”, 12” and 14”.• Custom sizes available. Other non-skid steer systems

are also available.• Standard pads are cast urethane.

eterra Steel trackS

Terra-Traxx OTT Tracks.If you have shopped around, you will see many manufactur-ers with a style of track similar to these. The reason is per-formance. With a two bar track you get the features of being able to climb and push even in the muddiest of conditions. You also get a self cleaning feature which allows material to move out of your tracks as it accumulates. This makes run-ning tracks much easier on your drive train and tires.

Two bar tracks are ideal for nasty, narly mud conditions, but also forested areas where you are climbing up and over tree remnants. The traction is phenominal with this style of tracks.

Another company is the originator of this style of track and they hold the patent rights. We have licenced these rights from them so we know the design is solid. Most of the other manufacturers use this track as a basis for their designs.

Terra-Traxx have a heavier bar and frame as well as a bush-ing system which is second to none. Your life expectancy is

greater for just about the same price as other brands, so the choice is easy. Skid Steer Solutions always tries to provide the best price but more importantly, the best value. eTerra provides you with the features and value that you have come to depend on.

Steel OTT bar tracks will outperform a tracked skid steer easily. Many tracked machines are parked for many days throughout the year because of traction issues. Not with OTT tracks on a wheeled machine. Traction issues are just not a problem. You can get out of the worst situations and not look back.

Sizing and installation is a snap. With the supplied tools, you can easily install Terra-Traxx in less than 30 minutes. If you need to remove them, you merely unbolt two sets of bolts and drive right out of them. It could not be simpler.

Some machines may require wheels spacers and boom stops. Check with us prior to ordering to be sure.



Features:• Available in 10” & 12” models.• Completely rebuildable bushing and link design.• Adjustablelinkdesignallowsforfieldadjustmentof

tightness.• Each pad weighs 22/25 lbs. A lot of steel means longer

wear.• Aggressive 2 bar design.• Self cleaning side design.

Solideal RubbeR TRackS

Solideal 10” & 12” Wheel/Tire & Tracks System:Solideals’ OTT rubber track system is the original. This is the third generation and it is amazing. It is a continuous design that uses a simple link system to join the ends together. These special joints allow you to adjust the track length by adding and subtracting different sized links.

This system allows you to turn your regular wheeled ma-chine into a aggressive tracked loader without all of the maintenance involved and at a fraction of the cost. A tracked machine has sprockets, idlers, rollers and tracks that must be maintained. By installing tracks over your tires, you get all of the features of a tracked and all you have to maintain is the tire pressure. No greasing, adjusting or changing big expen-sive parts.

These rubber tracks make a big difference to your floatation the 10” tracks are 14.75” wide while the 12” tracks are 17” wide. This extra width really helps the foot print and thus the PSI on the ground. It makes for much less ground distur-

bance. They are also great for moving on sandy beaches. There are no steel parts to wear or rust so track life in wet beach areas is extended.

There are sizes available for most skid steer loaders. Some machines will require wheel spacers and boom stops. You may also need to change your tires if the profile does not mate to the track. If you have heavy sidewalls, they can be damaged by the tracks as they are laterally stiff and will not give in to the tires.

In some cases it may be necessary to undersize the wheels so the height of the loader is not affected. If the machine height is too high, your buckets may not properly contact the ground.



Features:• Single Belted system with integrated belting.• Aggressive tread pattern with lots of rubber.• Patented Joint Link System. • Ships with installation tool.• Weight - 900 lbs. 10”.• Weight - 1200 lbs. 12”.

Tree Jaws

TJ-44 Tree Jaws. This is a top quality Nursery Tree Fork rated at up to 3000 lbs. of carrying capacity. Position plants, trees and large shrubs quickly and with ease. Use it for lifting, carrying, and lowering balled and container-grown trees & shrubs. Also great for lift-ing, carrying, and lowering landscape rocks. The uses for this are endless.

The capacity is awesome as the fork can grasp up to 44 inch tree balls. It also features a smooth radius trunk support so that you can handle the tree without it falling back on you and to help you maintain good visibility. Includes a 6” tread plate on forks to firmly grip bags, boxes, pots, and rocks.

Optional adjustable pressure setting to prevent tree ball or container damage available.

Manufacturers 2 year limited warranty.



Specifications:• Overall Width - 48”• Overall Length - 85”• Overall Height - 59”• Fork Length - 64”• Parallel Spread of Forks - 22”• Fork Opening at Tips (Open) - 58”• Fork Opening at Tips (Closed) - 8”• Maximum Ball Size - 44”• Distance From Hitch to Center of 44” Ball - 56”

• Weight - 680 lbs.• Maximum Load Capacity - 3000 lbs.

Timberline Tree Shear

TREE SHEAR - TB-03

The “World’s Best Tree Shear” is just what we say it is. The Timberline Tree Shear is a commercial grade tree shear built exclusively to be used with Skid Steer Loaders. It has the standard rotation feature that has made this model of shear so popular for the past 8 years that we have sold them, but it is now more powerful than ever. The TB-03 has the largest cylinder and porting of any tree shear we have ever offered. The larger porting and valving allow the flow of your machine to increase the speed of the cut. In addition, the TB-03 uses a 5.5” bore cylinder which increases the overall cutting power by 23% over our previous model.

It can easily cut green hardwood trees up to 14”, The jaw opening will allow larger trees to but cut if they are softer. The simple, yet useful solonoid controls make it easy to be cutting and rotating the jaw with a simple push of a button. Plug and play adaptors can be easily added for most ma-

chines using 14 and 8 pin electrical controls.

What is so useful about this shear?

• Cut a tree down, pivot the shear from inside your cab and cut the tree into sections.

• Pick up the sections and carry them away.• Reach up and trim a standing tree.• Clear downed trees quickly and easily.• Access branches no matter what angle they are at.

Note: When cutting the main tree trunch, the shear must be in a perpendicular plane. If you angle the blade, it will cause the blade to go out of alignment.



Features:• Main Frame - A572 Grade 50 - 1” thick.• Quick Hitch - A572 Grade 50 - 3/8” thick.• Blade - T1 - 1” Thick .• Main Pivot Pin - 1045 Induction Hardened, Chrome

Plated - 3”, Rod End - 1-1/2”.• Rotate 0 - 110 degrees.• Weight - 1350 lbs.

What can it cut?• Hardwood trees up to 14” in diameter & Larger soft-

wood trees. Jaws open large enough to allow a 22” tree, however we cannot guarantee it will cut as it is dependent on the hardness of the tree.

• It will not cut Tires, Steel, Scrap, Wire, Dead Animals.

Timberline Tree Shear Tbl-1000

TREE SHEAR - TBL-1000

This is the baby sister to the “World’s Best Tree Shear”. It has all of the functions of the TB-03, but is more compact and less weight. The TBL-1000 Tree Shear is a compact com-mercial grade tree shear built exclusively to be used with Skid Steer Loaders and mini-excavators. It has the standard rota-tion feature that has made this style of shear so popular.

It can easily cut green hardwood trees up to 10”, The jaw opening will allow larger trees to but cut if they are softer. The simple, yet useful solonoid controls make it easy to be cutting and rotating the jaw with a simple push of a button. Plug and play adaptors can be easily added for most ma-chines using 14 and 8 pin electrical controls.

The single blade design encourages the trees to fall to one side. Escape proof serrated power jaw grips tree to allow 100% of the machine’s power to be applied to the blade.

The single 1” blade eliminates complicated adjustments andsharpening.

What is so useful about this shear?• Cut a tree down, pivot the shear from inside your cab and

cut the tree into sections.• Pick up the sections and carry them away.• Reach up and trim a standing tree.• Clear downed trees quickly and easily.• Access branches no matter what angle they are at.• Can be ordered for skid steer mount, most popular exca-

vators or blank mount for whatever you want to mount it on.

Note: When cutting the main tree trunch, the shear must be in a perpendicular plane. If you angle the blade, it will cause the blade to go out of alignment.



Specifications:• Rated capacity: 10 inch• Weight: 655 pounds• Hitch: SAE J2513 Universal• skid steer coupler standard• (other couplers available)• Blade cylinder: 4” bore x 18” stroke.• Rated for 3000 psi operating pressure• Tilt cylinder: 2.5” bore x 8” stroke.

• Easily shears 10” hardwood• Blade transit time:• Plumbing: Gates 4000 psi hoses with durable wrap are

provided.• •Bladematerial:ASTMA514-GrB(“T1”steel)• •Solenoidvalve:12VDC• Activation current draw: 4.5A• Hold open current draw: 1.0A (holds valve in “tilt” posi-

tion)

Bradco 2415 tree Spade

Bradco Model 2415 Tree Spade: Comes in 24”, 32” and 44” Sizes:

Bradco has provided over 35 years of productivity, reliability and durability. The quality of this product is outstanding and shows the Bradco commitment. The standard features of the 2415 includes an undercutter blade that cuts the tap root and provides a unique, optimized ball that limits compaction and allows digging in looser sandy soil for support under the ball. Easy changing blades to better approximate a round shape and multiple cylinders which will exert more precise force around the ball. 15° truncated, flat bottom blades for a sharp and clean cut at a direct angle without tearing or stretching the root sys-tem. Same great “CLEGG” design with updated manufactured structures and hydraulics. Has electric over hydraulic control operated by joystick or interfaces with the loader auxiliary functions.



Model 2415 3215 4415Overall Height - Blades Down 51.75Ó 61Ó 76.25ÓShipping Height (Blades Removed) 33Ó 37Ó 44.38ÓFrame Height 29.5Ó 29.5Ó 29.5ÓDigging Depth 20Ó 24Ó 32ÓCutting Angle 15¡ 15¡ 15¡Overall Transport Width (Gate Closed) 52Ó 68Ó 76.25ÓOverall Width (Gate Open) 63Ó 81Ó 87ÓMaximum Gate Opening 21.5Ó 41Ó 44ÓOverall Length (Gate Open) 52Ó 61.5Ó 94.25ÓOverall Transport Length (Gate Closed) 47.5Ó 51.5Ó 76ÓNumber of Blades 3 4 5Blade Sizes Available (Ball Diameter) 16Ó , 18Ó , 20Ó , 24Ó 20Ó , 24Ó , 28Ó , 32Ó 32Ó , 36Ó , 40Ó , 44ÓTree Diameter (Trunk Caliper) 1.5Ó - 2.5Ó 2Ó - 3.5Ó 3Ó - 4.5ÓBall Weight 200 - 400 lbs. 300 - 900 lbs. 1000 - 2000 lbs.Flow Requirements (GPM) 10 GPM 10 GPM 10 GPMMinimum operating Pressure (PSI) 2250 PSI 2250 PSI 2250 PSIWeight 1200 lbs. 1600 lbs. 3000 lbs.

EZ-spadE TrEE spadE

This is one simple little tree spade that will change your mind about the word small. Using only the power of your machine, you can move some incredibly large root balls. At less than 1/10th of the price of a hydraulically operated tree spade, it is well worth the investment for the small operator who just wants the job done without the large expense.

Our tree spade is made the way we make all of ourattachments. We use top quality materials for the blade and attach it to our well designed backplate. Starting with the blade, we use T1 structural plate 3/8” thick. This is roughly 10 times stronger than the mild steel that most of our competi-tors use.

Our back plate uses a double formation process which means your lower pins will slide into two sets of ears. Other manufacturers use a solid single piece that they weld some ears onto. This works, but looks homemade and lacks the structural integrity that our plates have. When you are bear-

ing down with all of the weight of your machine and you try to lever a root ball out of the ground, you do not want to find the weakness in your mounting ears.

This is the largest and nicest spade of its kind. The overall width with backplate is 46”. The actual spade width is 43”. The depth is 44” and the height is 26”. Material used is 3/8” T1 structural plate. This ensures that the spade will not bend when you are prying even the toughest roots. It also allows the spade to penetrate the ground easier by being thinner.

If you make the spade thicker, it is harder to push into the ground and weighs more, thus taking away some payload. The tip is flattened to allow you to cut. This way it will cut the root if desired so you can easily remove thetree. Also great for stump removal.



Specifications:• Universal Skid Steer Mounting Plate Includes Case

1800 Series Machines• Heavy Duty Double Walled Mount• Blade - 3/8” T1 Structural Plate• Width - 43”• Depth - 44”• Height - 26”• Weight - 325 lbs.

Trench compacTor

TC-04 Trench Compactor:A very handy device for the compaction of trenches using your skid steer loader. But that’s not all. If you have an excavator, you can unbolt the TC-04, add a coupler and use it as an excavator attachment. Now that is value!

No matter what your weight class, the TC-04 has an extra heavy duty bearing race that can support the wheel with weights applied up to 10,000 lbs. Now that is what we call tough. Your compaction will be uniform, deep and tight. Everything you would want from a non-powered compactor is here. It is heavy duty, compact, easy to use and simple to maintain.

A great tool at a great price. With eTerra, you just can’t go wrong.



Specifications:• Standard Universal Mount removable to be mounted on

an excavator.• 4-1/4 Solid Steel Pads.• Extra Heavy Duty Bearing Race.• 45” Depth to the plate.• 27” Wheel.• Greasable Bearings.• 520 lbs. so it can be operated on anything.

bradco 625 Trenchers

We take the guess work out of ordering trenchers. Most people just want a unit to get the job done. We have configured 2 sizes of trenchers that have all of the features you need without some of the more costly features that most pepple do not re-ally need. First the boom sizes. We carry two sizes, 3 feet and 4 feet. Why,? Because we can have them ready to go for you when you need them, and not hold your money while you wait weeks for one to arrive. We also insure that all trenchers are fully assembled, includes hoses and couplers and are ready to work as soon as they arrive.

These are valuable tools for running power and utility lines at a fraction of the time it takes using standard methods. When you need to get the job done quickly and with minimal ground disturbance, then a powered trencher is the way to go and Skid Steer Solutions is the place to get them.

Bradco 625 Trencher Configurations:• Boom and Crumber assembly complete and assembled.• 70/30 Shark Tooth Chain - Aggressive, great for rocky conditions but also very well suited for this style of trencher.• Chain is 6” wide.• Manual Side Shift - Easy to do and saves you over $700 as compared to hydraulic side shift.• Flow Rating - 14 - 23 GPM.• Hoses and 1/2” ISO flat faced couplers provided.• 18” Auger Discharge.



Specifications:• Fits all Skid Steers e/w Universal Quick Tach Adaptors.• Fixed length boom with spring loaded, self adjusting

idler and full rock guard.• Heavy duty boom and crumber assembly with replace-

able wear strips.• Single Side Spoil Augering.• 50,000 lb. 2” anti-back flex chain.• Two position manual side shift.

• Depth of trench rating based upon a 65 degree optimal angle of cut.

• Overall Length - 73” - 86”• Overall Height - 32”• Spoil Discharge Reach - 18”• Side Shift Right of Center - 17”• Weight 1210 lbs.

UA-30 UniversAl AdAptor

UA-30 Universal Skid Steer Adaptor Plate:

This is a heavy duty adaptor plate that meets the strength guidelines of the manufacturer’s original specifications. By making the rear of the plate flat and open, the customer can place this plate on virtually anything.

Some Uses Include:

• Tractors - front and rear mount on the loader or 3-point.• Excavators - Add skid steer attachments to your excavator.• Older skid steer loaders. Bring your machine up to date.• Mini Dozers - Use a skid steer grapple on a dozer.• Tele-handlers - Add any skid steer attachment to your arsenal.

You can weld these directly over your existing attachment plate. Or, you can cut off your existing ount and use existing pins mounts to weld onto the USA-30 adaptor giving you a stock look. If you have a backhoe, excavator or other machine that does not have a skid steer adaptor, this is the item to give you a head start on retrofitting that machine.



Specifications:• Single Pieace formed pads.• 44 5/8” Wide.• 16” tall plus handles.• Machined pins and connecting hardware is

first class.• 2” x 3” Heavy walled tubing for rear mounting.

Padded Vibratory roller

Heavy Duty Skid Steer Padded Vibratory Roller:

Compare these rollers to any manufacturer’s offerings and they don’t compare. These are extremely well built as they need to be. They are hard hitting machines that can deliver up to 9370 lbs. of dynamic force when operating at 20 GPM. These commercial duty rollers have hydraulic drives that are protected and isolated to provide maximum performance and reliability. Their versatility makes them highly effective on a wide range of materials including sand, gravel, soils and asphalt.

The steel drum has an adjustable scraper blade between the frame and drum ensuring smooth and uniform compaction per-formance. The quality of these rollers makes them ideal for rental fleets, contractors, landscaping, roadways, walkways, bike paths, golf courses, bridges and parking lots.

The mounting plate contains an internal pivot point that allows the compactor to follow the contours of the ground to insure a quality compacting job.

Minimum skid steer lifting capacity is 1750 lbs.

Ships complete with hoses and 1/2” Flat Face Couplers.



Model 48Ó Padded 66Ó Padded 73Ó Padded 84Ó PaddedDiameter 22Ó 22Ó 22Ó 22Ó

Force 5750 lbs. 7800 lbs. 8550 lbs. 9370 lbs.

Weight 1630 lbs. 2085 lbs. 2230 lbs. 2455 lbs.

Speed 2600 VPM 2600 VPM 2600 VPM 2600 VPM

Max Flow 25 GPM 25 GPM 25 GPM 25 GPM

Smooth Vibratory roller

Bradco Heavy Duty Skid Steer Smooth Vibratory Roller:

Compare Bradco rollers to any manufacturer’s offerings and they don’t compare. These are extremely well built as they need to be for skid steer operations. They are hard hitting machines that can deliver up to 9370 lbs. of dynamic force when oper-ating at 20 GPM. These commercial duty rollers have hydraulic drives that are protected and isolated to provide maximum performance and reliability. Their versatility makes them highly effective on a wide range of materials including sand, gravel, soils and asphalt.

The steel drum has an adjustable scraper blade between the frame and drum ensuring smooth and uniform compaction per-formance. The quality of these rollers makes them ideal for rental fleets, contractors, landscaping, roadways, walkways, bike paths, golf courses, bridges and parking lots. Each roller has a unique pivoting mount that allos the roller to follow the contour of the ground that they are compacting.

Choose the size that suits your operation. Available in sizes ranging from 48” - 84”. All Bradco rollers will operate with auxilli-ary flows ranging from 12 - 25 GPM. Check your lifting capabilities as you should have a minimum lifting capacity of 2000 lbs. to effectively use one of these rollers.

Ships complete with hoses and 1/2” Flat Face Couplers. Comes with a 1 year manufacturuers warranty.



Model 48Ó Smooth 66Ó Smooth 73Ó Smooth 84Ó Smooth

Diameter 24Ó 24Ó 24Ó 24Ó

Force 5750 lbs. 7800 lbs. 8550 lbs. 9370 lbs.

Weight 1680 lbs. 2150 lbs. 2300 lbs. 2530 lbs.

Speed 2600 VPM 2600 VPM 2600 VPM 2600 VPM

Max Flow 25 GPM 25 GPM 25 GPM 25 GPM

Wheel SpacerS

eTerra - Wheel Spacers (Qty 4) 1 For each wheel of your machine:

These are first quality commercial grade wheel spacers just like the others are selling, but at a great price. You will receive 4 spacers that measure 10” in diameter and 2” thick. They each have 8 lugs with studs and chromed nuts. Make sure you check your stud size and if they do not match check out our other other sizes. There are 2 sizes used on modern skid steer loaders. The Red model uses 9/16” lugs while the Grey model uses 5/8” lugs. The Black model uses a 6 lug design and 9/16” lugs.

For even wider applications, two sets can be stacked to make them even more useful.

If you are adding tracks to a machine, then chances are you will need wheel spacers. Check out our awesome track selection as well. We have built our business around solutions for 15 years.



Features:• Red - 9/16” Studs• 2” Thick• 10” Outer Diameter• 6” Open Center• Grey - 5/8” Studs• 2” Thick• 10” Outer Diameter• 6” Open Center• Black - 9/16” Studs

• 1.5” Thick• 8” Outer Diameter• 4” Open Center

BSG Skid Steer Winch

BSG Skid Steer WinchAnother great product designed for specifically for skid steer loaders. We use only Warn Commercial grade winches rated at 9,000, 12,000 and 15,000 lbs. When you use a winch, safety has to be your first concern. Any access to the operator is completely covered by our unique screening system. The base of the winch plate has a drop edge that allows the operator to use the ground for additional grip so the machine is not pulled towards the direction of the pull.

These winches are great for pulling trees, dragging downed trees and rocks or anything you need to pull out of an area that you cannot access with your skid steer.



Features:• 15,000 lb. Rated Continuous Operation.• Manufactured in the USA.• Hydraulic Flow Requirement - 11 - 21 GPM @ 3000

PSI.• Winch Shield for Safety.• Frame Designed for Open Visibility to Winch.• Steps for Entering and Exiting Loader.• Hoses Rated to 4000 psi.• Weight 290 lbs. .• Recommended for Skid Steer Loaders with a minimum


• Ships complete with cable, hoses and flat faced hy-draulic couplers.

Winch Speed - 9,000 lb.• Layer 1 – 47 Feet per Minute• Layer 2 – 56 Feet per Minute• Layer 3 – 65 Feet per Minute• Layer 4 – 73 Feet per Minute



Our StOry

About UsWe are a family run business based in Bellingham, Washington. Don’t let our location fool you, our trucking costs are contract based and are very low. We built our first product in 1994. They were a simple set of chain tracks. This was our only product until the introduction of our backhoe in 1998.

We launched www.loadertracks.com which was a success, but we soon realized that it did not convey our true intent. Since we were building custom products based on our customers needs, we decided on Skid Steer Solutions. This has been a perfect match for what we are all about. When you contact us, we try to find a solution for your needs. Lots of times this involves us sending you to another manufacturer, but you will remember us. We gave you the information you needed to make an informed decision and did not try to sell you something you did not need. This is how we like to be treated when we want to buy something and so this is what you should expect from us. We do not attempt to sell you, we teach you what to buy.

We market online only to be able to reach our customers directly and not have to add additional margins to include dealers. This works out very well for our customers. The best products at the best price. Excellent service and support 24/7. It just can’t get any better.

We strive to provide the best possible products at the best possible prices regardless of their country of origin. If you need to know that origin, we will gladly divulge it and not cover it up with a made in the USA label as others choose to do. When you deal with Skid Steer Solutions, you are dealing with a company that is in it for the long haul and that maintains a high level of integrity and customer trust.

Ph. - 1.866.966.2538/1.360.966.2538Email - [email protected]

Documents

2010 Product Guide