Upload
dortha-brooks
View
214
Download
0
Embed Size (px)
Citation preview
©2003 Texas Trade and Industrial Education 1
Media Technology
Safety for Media Technology
©2003 Texas Trade and Industrial Education Media Technology: Safety in the Media Technology Lab 2
Unit Objective
Upon completion of this unit, the student will be able to demonstrate knowledge of the concepts, skills and rules related to health and safety in the media technology field.
©2003 Texas Trade and Industrial Education Media Technology: Safety in the Media Technology Lab 3
Specific Objectives
Define terms associated with lab safety Describe the purpose of safety rules Describe and demonstrate appropriate behavior
and conduct in the media technology area Identify safe practices when working with
electricity Describe appropriate posture for working at
editing and computer work stations
©2003 Texas Trade and Industrial Education Media Technology: Safety in the Media Technology Lab 4
Specific Objectives
Demonstrate the correct way to lift and carry Identify various types of fires and the proper
fire extinguisher to use Identify the proper procedure to follow in case
of an accident, fire, or emergency evacuation or drill
Identify appropriate/inappropriate lab behaviors
©2003 Texas Trade and Industrial Education Media Technology: Safety in the Media Technology Lab 5
Safety
Should be understood and practiced by everyone.
Should follow workplace standards. Assures safe and healthy working conditions. Protects people (you and others) from injury.
©2003 Texas Trade and Industrial Education Media Technology: Safety in the Media Technology Lab 6
OSHA
Occupational Safety and Health Administration
“Assure as far as possible every working man and woman in the nation safe and healthful working conditions and to preserve our human resources”
©2003 Texas Trade and Industrial Education Media Technology: Safety in the Media Technology Lab 7
Conduct
Definition: Correct behavior in the appropriate place and time
Varies by place and event Know the safety rules for the class Disruptive behavior should not be tolerated Unsafe actions including throwing objects
and running will not be tolerated Report unsafe conditions
©2003 Texas Trade and Industrial Education Media Technology: Safety in the Media Technology Lab 8
Personal Attire
Should be appropriate for the job you are doing Wear shoes that enclose the foot Avoid sandals and slip on shoes when operating
equipment that moves or rolls Wear low or medium heels, wear slip resistant
shoes Pants should not be long enough to cause tripping Gloves should be worn for hot, rough, sharp objects
©2003 Texas Trade and Industrial Education Media Technology: Safety in the Media Technology Lab 9
Using Electricity
Do not use equipment with damaged cords Equipment should be grounded Use heavy-duty extension cords Never use electrical equipment on a wet surface Keep equipment dry Do not touch electrical switches or equipment with
wet hands Do not over-load electrical circuits
©2003 Texas Trade and Industrial Education Media Technology: Safety in the Media Technology Lab 10
Protecting Your Hearing If you must shout to be heard from three feet away,
the noise is too loud; hearing protection should be used
DecibelsOver 115 decibels -- unsafe
Indications of hearing damageRinging in the earsMuffled hearingTalking too loud
Hearing damage is permanent
©2003 Texas Trade and Industrial Education Media Technology: Safety in the Media Technology Lab 11
Workstations
Keyboard and work surfaces - arms should form a 90-degree angle
Top of the monitor - no higher than eye level Chairs - comfortable backrest, your feet
should be flat on the floor Chairs or stools should never be leaned or
tilted back
©2003 Texas Trade and Industrial Education Media Technology: Safety in the Media Technology Lab 12
Lifting And Carrying
Size up the load Lift using your leg muscles – not your back
(don’t bend over) Think before you lift Obtain help Balance the load Carry less, more times- make several trips
©2003 Texas Trade and Industrial Education Media Technology: Safety in the Media Technology Lab 13
Maintenance
Clean your work area before the end of the period
Store equipment and materials in approved locations
Floors must be free of objects that might cause falls
©2003 Texas Trade and Industrial Education Media Technology: Safety in the Media Technology Lab 14
Fire Safety Type A fires - combustible materials, paper,
cloth, wood Type B fires – flammable liquids, solvents, oil Type C fires – electrical equipment or electrical
wires Using the wrong type of extinguisher on the
wrong type of fire can be dangerous PASS method
Pull the pin, Aim low, Squeeze the handle, Sweep from side to side
©2003 Texas Trade and Industrial Education Media Technology: Safety in the Media Technology Lab 15
In Case Of An Accident
Immediately report accidents to the teacher The school nurse should treat injuries
©2003 Texas Trade and Industrial Education Media Technology: Safety in the Media Technology Lab 16
Human Error
The one element common to most accidents Not applying common sense is the cause of
most accidents!
©2003 Texas Trade and Industrial Education Media Technology: Safety in the Media Technology Lab 17
Where to Get More Information
Operation/instruction and manuals for equipment used in the individual lab. Most have a section on safety at the beginning that covers general information