. .

Wi-Fi Key:

OBD HOSTPOWER Wi-FiOBD H Wi-Fi

LOCK

ACC ONSTART

‘POWER’ LED will turn ON, and the white ‘Wi-Fi’ LED will emit a � ash every 3 seconds.

– LEDs are o� ? Check vehicle for blown fuses.

Vehicles with push button start: press the button without stepping on the brake pedal.

Android Quick Start GuideOBDLink MX Wi-Fi

Android

2

1

4Scan the QR code or visit the URL from your Android device to download the OBDLink app:

The factory default Wi-Fi Key is found on the bottom of the unit. It is lowercase and includes periods.

obdlink.com/app

Download & install OBDLink appTurn ignition to Key On, Engine O� position

Write down the 14-digit Wi-Fi Key

[instructions continue on reverse ]

The DLC is usually found on the driver’s side, under the dash.

– Can’t � nd your DLC? Visit dlc-locator.com

3 Plug MX Wi-Fi into the diagnostic link connector (DLC) 5 Open ‘Settings’ app, and tap ‘Wi-Fi’

Thank you for your purchase!

If you like OBDLink MX Wi-Fi,please post your review on

9 Launch OBDLink app, tap ‘Connect’

8 Enter the Wi-Fi Key from step #1 in the ‘Password’ � eld, and tap ‘Connect’

– Need help? Go to obdlink.com/support or scan the QR code

– For advanced configurations, go to obdlink.com/setup or scan the QR code

6 Turn Wi-Fi on

7 Select ‘OBDLink MX’ from the list of networks

The network status will change to ‘Connected,’ and the ‘Wi-Fi’ LED will change to a slow blink.

– Remember that the Password is lowercase and includes periods.

OBD HOSTPOWER Wi-Fi

10 Choose ‘Wi-Fi’

Once the app establishes a connection with MX, the ‘Wi-Fi’ LED will turn on solid. Tap ‘Diagnostics’ to start a scan.