GAUL ASSAULT RiflEMODElS: ARM, AR, SAR

PageChapter 1. DESCRIPTION 3Chapter 2. GENERAL DATA 6Chapter 3. FUNCTION 8Chapter 4. OPERATION 12Chapter 5. DISASSEMBLY AND ASSEMBLY 19Chapter 6. PREVENTIVE MAINTENANCE 26Chapter 7. TROUBLE SHOOTING 31Appendix A. PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 34Appendix B. PARTS DRAWING 36

1

N ..,., ..,.,~. ~.~I

I

;1 ;1lb

lb

~C')tIJ-:::.: :::.:

)::,.)::,.

::t:l ::t:l~

Fig. J - The Ga/i/ SAR

DESCRIPTION

The Galil assault rifle (Models ARM, AR andSAR) is a multi-purpose personal weapon,designed to serve as a basic weapon for theinfantry squad.

The rifle (figs. 1, 2 and 3) is lightweight,air-cooled, gas-operated, magazine fed,shoulder or hip fired weapon. It can be usedas an assault rifle and light machine gun(ARM: with bipod & stock extended). Byuse of a fire selector lever, the weapon firesautomatically or semi-automatically.The rifle's flash suppressor also serves as agrenade launcher.

The Galil is deployed in each of these modeswithout any' change of parts or addition ofadapters.

3

Outstanding ease of handling makes theGalil a unique weapon in its class. Thecharging handle, fire selector lever andmagazine catch may all be operated fromeither side of the weapon so that handling isequally easy for the right or left-handedsoldier.Servicing of the weapon is simple. Only sixparts need to be handled in field stripping(fig. 4). No tools are required when strippingthe weapon.A brief description of the components is asfollows:The barrel assembly is air-cooled andcontains a post type front sight and a flashsuppressor. The flash suppressor also servesas a grenade launcher and bayonet mount.The folding stock is of rugged lightweightconstruction. When extended, it locks intoposition secured by means of a spring loadedlocking mechanism.

4

The bolt carrier, which locks and unlocks thebolt, travels in the upper part of the receiverand accommodates the return spring.The fire selector lever, when on safe position,positively blocks the trigger and covers theslot in the cover in which the charginghandle travels, thus preventing the cockingof the weapon and dirt from entering themechanism.

GENERAL DATAGALIL MODELS: ARMS, AR, and SAR

R.H.4 Grooves, 1 turn in 305 mm (12 inches).G~ G~Rotating bolt Rotating boltMagazine MagazineAir Air

4.00 Kg 3.75 Kg

4.30 Kg0.29 Kg 0.29 Kg

0.90 Kg 0.90 Kg--1025 mm 915 mm790 mm 680 mm508 mm 400 mm535 mm 427 mm

RiflingMethod of operationType of breech mechanismMethod of feedingCooling

OverallWith stock foldedBarrelBarrel with flash suppressor

Rifle without bipod and carrying handleRifle with bipod and carrying handleMagazine,25 rounds (empty)Magazine,25 rounds (loaded)

6

475 mm 400 mmPost type, with protective battlesight ring.Aperture, 'L' flip type, set for 300 and 500 m.Folding, with betalight.

7.62 x 51Ball, M599.5 grams

24.5 grams

7.62 x 51Ball, M599.5 grams

24.5 grams

7

FUNCTION

Retraction Movement

When the cartridge is fired the pressure ofthe burnt propellant causes the bullet tomove forward. When the bullet passes thegas port, gases under pressure enter the gascylinder and push the gas piston and thus thebolt carrier backwards (piston and boltcarrier are rigidly connected). The backwardmovement of the bolt carrier causes the boltto rotate, because the lug groove in the boltcarrier acts upon the bolt lug. This rotarymotion of the bolt releases the emptycartridge case from the chamber and onlyafter the completion of the unlocking actiondo the bolt carrier and bolt retract togetherbackwards, thus finishing the extractionoperation. When the bolt carrier movesbackwards the return spring contracts andthe empty cartridge case is thrown outthrough the ejection port by the ejector.8

During the retraction of the bolt carrier andbolt, the hammer is cocked an d engaged tothe trigger sear.

Forward Movement

When the return spring expands, it drives thebolt carrier and bolt forward. The boltscoops one cartridge from the magazine andtransfers it to the chamber. In the meantimethe extractor "grips" the cartridge case rim.The continuation of the forward movementcauses the bolt to rotate ~nd thus, throughthe locking lugs, locks the bolt against thereceiver. WhenJhe locking action iscompleted the bolt carrier's taper reachesthe automatic sear arm, pushes it forwardand causes the automatic sear to turnand release the hammer. When pulling thetrigger, the hammer is disengaged from thetrigger sear and hits the firing pin wh ich inturn strikes the primer of the cartridge 'inside the chamber.

In this position the fire selector lever islocated above the rear end of the triggerpreventing its movement and thus therelease of the hammer.

Fire Selector lever on Automatic "A"Position(see fig. 6)

In this position the selector lever is locatedabove the disconnector while the trigger's

Fig. 6 - Fire selector lever onautomatic uA" position

--_..~~

p.'" .~ ~

t:::::::.:--. \to)V';"):~;'

sear engages the hammer (hammer spring iscompressed) .At the end of the forward movement thebolt carrier disengages the automatic searfrom the hammer's grade. The hammer isnow engaged by the trigger's sear only.When pulling the trigger the hammer isreleased, hitting the firing pin.Because the trigger remains pulled andthe selector lever is on the (automatic)" A"position, (thereby preventing thedisconnector from engaging the hammer)the only component engaging the hammerand holding it against the force of the springis the automatic sear. The automatic sear isdisengaged from the hammer at the end ofthe forward movement of the bolt carrierthus releasing it. When released, the hammerhits the firing pin and fires the cartridge.The action is repeated as long as the triggeris kept pulled.When the trigger is released the hammer is

10

engaged by the trigger's sear and the firingstops.

Fire Selector lever on Semi.Automatic "A"Position (see figs. 7A & 7B)In this position the fire selector lever doesnot act either on the trigger or on thedisconnector. Pulling the trigger operatesthe disconnector causing it to engage thehammer, preventing it from moving upward.In this mode the rifle will fire one roundeach time the trigger is pulled.

In order to fire another cartri dge the triggermust first be released. When releasing thetrigger the disconnector releases the hammerwhich, in turn, is engaged immediately bythe trigger's sear. Pulling the trigger causesthe release of the hammer from the triggersear, thus hitting the firing pin.

OPERATION

GeneralIn this section, instructions regarding theoperation of the rifle are given. Theseinstructions must be adhered to in order toensure that the rifle is safe and alwaysoperational.

Safety Precautions1. 00 not leave rifle cocked, even if it is not

loaded.2. Make sure that fire selector lever is on safe

"S" position whenever:a. Firing is terminated.b. Rifle is being transported or moved.c. Rifle is not in use.This is to ensure that the rifle is renderedsafe and to keep dirt or sand from gettinginto the ejection port.

12

3. If jamming occurs while firing, removemagazine before carrying out anyinspection.

loading and Unloading of a Magazine1. Loading: Hold magazine with your left

hand (follower facing upwards) andsupport it on your knee. Hold cartridgeswith right hand. Place cartridge infollower, press cartridge with right thumtLoad magazine with cartridges.

2. Unloading: Hold magazine with your leflhand (follower facing upwards and backof magazine facing your body) supportinit on your knee. Push cartridges, one aftlthe other, with your right thumb, untilthe last cartridge is ejected.

Inserting a Magazine(see figs. 8A and 88)Hold pistol grip with right hand, tilt therifle about 600 up. Hold magazine with lefthand tilted 600 towards rifle and insertmagazine into rifle magazine opening (the

Fig.8A - Inserting the magazine, Stage A

tilt is to guide magazine into magazineopening, thus ensuring proper fit). Pullmagazine with left hand until you hearmagazine catch snap into place.

Note: While inserting the magazine, selectorlever must be on (safe) "S" position.

Fig.8B - Inserting the magazine, Stage B13

Cocking and loading of Rifle(see fig. 9)While still holding rifle's pistol grip - afterinserting magazine, pull charging handleall the way back, then release.This action will cause one cartridge to be

scooped from magazine into chamber.The rifle is now loaded.

Note: Before pulling charging handle be sure thaithe fire selector lever is on nRn or nA"position .

Fig. 9 - Cocking the rifle.14

Fig. 10 - Removing magazine

firing and Unloading of RifleWhile moving fire selector lever to "R"(semi-automatic) or "A" (automatic)position, hold rifle firmly with both hands

. and pull the trigger. When firing "semi.automatic" the trigger must be released andpulled again in order to fire the nextcartridge. When firing "automatic" the firingwill continue to the last cartridge, as long asthe trigger is kept pulled.

In order to unload the rifle: removemagazine, remove cartridge, clear rifle andadjust fire selector lever to "S" (safe) position.

Removing Magazine(see fig. 10)In order to remove magazine, holdmagazine with 4 fingers of the left handwrapped around front side of magazinepressing the magazine catch with

the thumb, while at the same time pulling themagazine in a forward and downwardmovement.

Note: It is also possible to remove themagazine with the right hand.

11;

Fig. 11 - Rifle ready for grenade launching

Preparing the Rifle for Grenade Launching

(see fig. 11)

The flash suppressor-grenade launcher is usedfor launching all grenade tv pes, i.e. anti-tank,personnel, smoke, etc.

16

,. Belore grenade launching, adiust selectorlever to uR" (semi.automatic) position.

2. Mount the disposable grenade sight onrifle's sight.

3. Insert the 12 round magazine withballistic cartridges into the rifle.

4. Rifle is now ready for grenade launching.

firing from a Bipod Mounted Rifle1. Hold rifle horizontally with the right

hand and with the index finger andthumb of the left hand press both bipodlegs in order to release them from handguard holder. Pull the still closed legs

. down and forward until the legs engagethe bipod connector.When released, the legs will spring open.

2. Mount the rifle on the ground, whileholding it by the stock, press rifle stockfirmly against shoulder.

3. Hold pistol grip with right hand, adjustselector lever to "R" or "A" position,cock rifle with left hand, grip top ofstock with left hand.

4. Rifle is now ready for use.

Note: Folding of bipad legs is performed inreverse order.

Sight AdjustmentThe front sight is adjustable upwards,downwards and sideways.The rear sight is an aperture It L" flip typeset for:o - 300 meters range (marked digit 3).300 - 600 meters range (marked digit 5).

Adjusting the front SightIn order to correct sight deviation, thesight edge must be adjusted in the directionof the deviation i.e. when mean "hit" pointis above the target adjust sight edge upwards,etc.

Night SightsThe sights are provided with betalights (twospots at the rear and one on the front). Thesights are folded down when not in use.

Sight Deviation CorrectionThe following tables indicate the relativeadjustments (see page 18).

17

HORIZONTAL ANO VERTICAL ADJUSTMENT FOR 100 METERS RANGE

No. of Turns Correction No. of Turns Correctionon Adjusting on on Sight onScrew Target Edge Target% Turn 40mm % Turn 40mm% Turn BO mm % Turn BOmm% Turn 120 mm % Turn 120 mm1 Turn 160 mm 1 Turn 160 mm

HORIZONTAL AND VERTICAL ADJUSTMENT FOR 25 METERS RANGE

No. of Turns Correction No. of Turns Correctionon Adjusting on on Sight onScrew Target Edge Targety, Turn 20mm % Turn 20 mm1 Turn 40mm 1 Turn 40mm

18

300m

.................1\.-t12+15)cm

,

250m

Aimillil Point /Ma.n Point at Impacl200m100m2~m

. .-JmmAim;flg PDUlt ~--, 1.8cmMe",Point.fh.p.d I ~~~------i--------_.IQ-- ---

Zeroing of Galil ARM and AR for 250 m.(SAR model: MeanPoint of Impact at 25 m: + 19mm)

DISASSEMBLY & ASSEMBl YGeneral1. This chapter deals only with disassembling

and assembling operations which a soldieris allowed to perform in the field. Apartfrom these operations disassembling orassembling of any other parts is forbidden.

2. The disassembling operation must becarried out on a clean surface and

disassembled parts should be placed intheir order of removal.

3. Disassembling must be carried out withstandard tools.

4. Assembling is always performed inreverse order to disassembling unlessotherwise specified.

5. Before disassembling, carry out thefollowing operations:

19

a. Remove magazine, remove cartridge,clear rifle several times to make surethat there is no live cartridge in thebarrel chamber.

b. Adjust fire selector lever to "R" (semi-automatic) or" A" (automatic) position.

Fig. 12A - Disassembling of cover,pressing cover catch20

Disassembling the Cover Assembly(see figs. 12A and 128)

Press cover catch inward with right thumbwith left hand, tilt cover assemblyto the right and remove it from rifle.

Fig. 12B - Removal of cover

Disassembling the Return Spring Assemblyand Bolt Carrier Group(see figs. 13A, 138, 13C and 130)1. Hold pistol-grip with left hand, press

cover catch inward with the right thumb.

Fig. 13A - Disassembling the return spring

Fig. 13C - Disassembling of bolt carrier group

pull upward and pull outbuffer assembly.

2. Pull bolt carrier and extract it fromreceiver, hold bolt carrier with the righthand and remove bolt.

!=====:;) ....-1"'-:-,,==-,,=

Fig. 138 - Removal of return spring assembly

Fig. 130 - Removal of bolt from bolt carrier21

Disassembling the Gas Cylinder(see fig. 14)Hold the end of the gas cylinder, pullbackwards and lift outside.We have now carried out all thediassembling operation allowed a soldier

Additional Disassembling Operations(in case of an emergency)Disassembling the Firing Pin

1. Push pin securing firing pin, withcombination tool.

2. Tilt bolt downward, make sure thatfiring pin does not drop while extractingthe combination tool.

Disassembling the Extractor

1. Push out extractor pin with combinationtool.

2. While extracting combination toolstripping pin from the pin hole, protectextractor from forced self release.

22

Note: Disassembling the firing pin and theextractor may be carried out by asoldier when it is necessary to replacea broken firing pin or a damaged extractlIt is strongly recommended to consultthe unit's armorer at all times.

Fig. 14 - Removal of gas cylinderAssembling the Extractor1. Insert extractor spring and extractor in

their proper places inside the bolt.2. Push extractor with the left thumb

inwards until the slot coincides with tilhole in the bolt's body.

3. Insert pin to secure extractor - make sureit is in the right position!

Note: The firing pin securing pin is also usedas a securing pin for the extractor's pin. It istherefore necessary to assemble the extractorspring, the extractor and the extractor pinprior to the assembling of the firing pin andits securing pin.

Assembling the Firing Pin1. Insert firing pin through bolt's rear making

sure that the slot in the firing pin coincideswith pin's hole in the bolt.

2. Insert combination tool stripping pin intothe pin's hole in the bolt until it protrudesfrom the other end, thus securing thefiring pin in position.

3. With the firing pin securing pinpush out the combination tool fromthe firing pin's hole until the securingpin is in place and the combinationtool stripping pin is removed.

Assembling the Gas Cylinderlift gas cylinder with the left hand. Fit itsrear end in its guides between the hand guardand the chamber and its front end into theopening below the front sight, then push.Make sure that the gas cylinder is properlyfitted and does not move.Assembling the Bolt Carrier Group

lift bolt carrier with the right hand and thebolt with the left hand. Hold bolt carrierwith the gas piston, pointing away from thereceiver and the bolt carrier's charginghandle resting in the palm of the righthand. Install the bolt inside the bolt carrier,pull forward and at the same time executehalf a turn until the bolt locks in the boltcarrier.Tilt assembly 1/4 turn counter.c1ockwise sothat charging handle is horizontally situatedand is pointing to the left. Install bolt carriergroup into the rifle's receiver by directing

23

the piston towards the gas cylinder and therear end towards its groove in the rifle'sreceiver.Assembling the Return Spring AssemblyHold the assembly with right hand. Insertthe front end into the opening at the rear ofthe bolt carrier. Push its rear end against thespring force and direct it towards the groovein the receiver. Make sure that the rear endof the assembly is resting against thereceiver.Assembling the CoverHold cover's rear with the right hand. Installcover above bolt carrier group. Push cover'sback against the catch, carefully insertingthe front end of the cover into the archedslot at the base of the gas cylinder.Firmly push cover's edge into the slot atthe receiver's rear end until the bufferassembly catch engages the cover thusprotruding through its opening.

24

Disassembling and Assembling the Magazi(see figs. 15A, 15B and 15C)

Disassembling1. Hold magazine with the left hand

(magazine base facing upwards and itsback supported with the thumb). Withthe aid of a cartridge push magazine bcatch inwards and pull magazine baseforward until it comes to a stop. Pressspring end with left hand thumb andmagazine base with left hand index fiholding spring base to prevent it frombeing released by the force of the spri

2. Free spring carefully (by rocking itsideways) and pull it out together witfollower.

25

Assembling1. Hold magazine with left hand (follower

facing downwards). Insert follower andspring in their position (rocking springin the process). Follower should bedirected towards its enclosure.

2. With the lett index finger pressspring. Insert magazine base, pushforward until catch protrudes.

Fig. 158 _ Disassembling of magazine, Stage 8

~

Fig. 15C - Disassembled magazine

Fig. 15A _ Disassembling of magazine, Stage A

PREVENTIVE MAINTENANCE

GeneralComprehensive knowledge of how to serviceand handle weapons, particularly automaticweapons, is of great importance. Specialattention must be paid to cleaning,lubricating and inspecting the weapon. Thiswill determine whether the weapon functionsproperly at the time it is needed.

In order to achieve accuracy in firing, thebore and chamber must be servicedthoroughly. The gas block must be servicedregularly and all soot deposits scraped. Thiswill ensure the correct rate of fire and theproper functioning of the rifle.

The body and the moving mechanism of therifle must be kept clean and lightly lubricatedto ensure that the rifle will operateefficiently under all conditions.26

Daily MaintenanceIn order to keep the rifle in good operatincondition, the following daily cleaning anservicing schedule must be maintained.1. Disassemble the rifle (as specified in

Chapter 5, Disassembly and Assembly)

2. Wipe all disassembled parts, removingtraces of oil and dirt. Use swab soakedwith lubricant*.

3. Clean the barrel bore. Swab out fromchamber to muzzle. Make sure, by visllinspection, that the bore is clean.

4. Thoroughly clean the chamber, usingchamber brush wrapped with swab.

5. After cleaning, lightly lubricate the buand chamber with a swab dipped inlubricant.

* Use only suitable rust preventive lubr,

6. Swab all gas system parts. Check, that nocarbon deposits are left either on the gasblock surface or inside the gas passages.If carbon deposits are found, clean byscraping with the appropriate scraperand lubricate.

7. Thoroughly clean the gas cylinder. Usegas cylinder brush.

8. Lubricate the gas cylinder. Use brushwrapped with swab dipped in lubricant.

9. Clean bolt carrier group with a swabdipped in lubricant.

10. Coat the bolt carrier and receiver contactsurfaces with lubricant.

11. Clean buffer assembly. Use swabsoaked with lubricant.

12. Using swab dipped in lubricant, cleanhammer and trigger mechanism, reach asfar as possible.

13. Assemble the rifle.

While carrying out the daily maintenancethe following inspection must be carried out:

1. Inspect barrel visually. Make sure that itis free from bulging, cracks, eros ion andcopper res)dues and that there is noother damage.

2. Inspect gas block, gas passages, pistonhead and bolt surfaces. Make sure theyare clean, free from dirt, rust or anyother foreign matter.

3. Check that dismantled parts areserviceable, particularly the firing pinand the extractor.

Caution: Refer to an armorer whenfinding faulty parts.

27

Weekly MaintenanceAs per Daily Maintenance procedure, withthe following additional operations:

1. Visually inspect bolt's surfaces and makesure that firing pin guide hole is round andundamaged.

2. Visually inspect firing pin tip andextractor. Make sure they are serviceable.

3. Check if the tire selector lever.isserviceable.

4. Check if the front sight blade is rigid andundamaged.

5. Check it the bipod functions satisfactorily.

6. Check if the rear sight is serviceable.7. Check if the betalight is installed in the

night sights and if it is in good conditionand serviceable.

8. Check if the accessories kit is complete,clean and serviceable.

28

Pre-Firing MaintenanceIn order to make sure of the properoperation of the rifle the followinginstructions must be adhered to.

1. Disassemble the rifle.2. Clean oil and dirt from dismantled parts

3. Thoroughly clean barrel bore andchamber as specified in Daily MaintenaLeave dry.

4. Thoroughly clean gas cylinder and gasblock. Remove all traces of soot deposi'

5. Lightly lubricate the bolt carrier andreceiver contact surfaces. Assemble rill

6. Check for proper functioning of rifleby cocking the rifle and pulling thetrigger. Repeat several times.

After firing MaintenanceSoot and other deposits such as gun powashes accumulated inside the bore and in

rille parts cause corrosion. It is, therefore,most important that the rille be cleanedimmediately after firing.Disassembling of the rifle should be inaccordance with Chapter 5. Disassembly andAssembly, and the following operationsshould be carried out:1. Clean the bore with swab dipped in

lubricant. Continue until swabscome out clean, then dry.After cleaning, lubricate lightly.

2. In order to remove deposits from thebore, it is advisable to use hot watermixed with (2%-3%) soap or washingsoda.

3. Cleaning the bore with soapy water isdone with the aid of a 5.56 mm armorer'sfunnel and is carried out as follows:

a. Make sure that the sealing ring is mountedon the funnel stem. Insert funnel

nozzle into the chamber, while rifle isheld vertically with the muzzlepointing downwards.

b. Pour large quantities of soapy waterinto the barrel. Repeat several times.Remove funnel only when it is empty.

c. Dry the bore.d. Clean the bore and chamber using swab

dipped in lubricant. Continue untilswabs come out clean. Then dry.

e. Lightly lubricate the bore and chamber.Use swab dipped in lubricant.

Cleaning the Gas System1. Clean the gas cylinder with a nylon bore

brush, removing all traces of soot andother deposits.Swab the gas cylinder. Use swab dippedin lubricant.Continue until swabs come out clean.

29

2. Clean gas passages by scraping all sootdeposits. Use the appropriate scraper.

3. Remove soot deposits from piston head.Use the appropriate scraper.Lubricate piston.

4. Clean gas release vents.Use the appropriate scraper.

Cleaning the Bolt Carrier Group1. Clean the bolt carrier group. Use swab

dipped in lubricant. Continue until swabscome out clean. Then dry.

2. After cleaning, lightly lubricate all parts.

Cleaning the Trigger Mechanism1. Clean hammer and firing pin.

2. Lubricate the hammer and firing pin.

30

Cleaning the External Surfaces and OtherParts1. Clean external surfaces and other parts

Use swab.2. After cleaning, apply a light coat of

lubricant to the outer surfaces andother parts. Use swab dipped in lubric

Inspection and Checking1. While carrying out the abovementione

operations, inspection must be carriedas specified in Daily Maintenance,lpag

2. Assemble the rifle. Check for properfunctioning by cocking the rifle andpulling the trigger. Repeat several tim

Immediate Action

TROUBLE SHOOTING

If your rifle fails to fire, immediate actionmust be taken without investigating thereason.

31

Aim & Fire: Aim and pull trigger. If theabove immediate actions arerepeated twice and rifle won'tfire, take the followingaction ...

Lower: Lower rifle from shoulderand remove magazine.

Look: Look inside ejection portand magazine.

Cock: Pull charging handle all theway back.

Locate: Locate fault by inspectingthe chamber and bolt carrier.

Fix: Fix fault and continue firing.

AMMUNITIONNever try to fire a cartridge that is heavilycorroded, dented or one which has a loosebullet.NEVER try to clean a cartridge withgasoline or any other inflammable material,nor with detergents or solvents.

Pull charging handle all theway back. Watch for ejectionof cartridge or cartridge case.

If cartridge or cartridge caseis ejected - release charginghandle to feed new round.(Don't ride the charginghandle) .

Release:

Cock:

The immediate action involves the followingoperations:Tap: Tap the magazine upward

to make sure it is properlyseated.

1Won't feed

32

Deformed magazine

Broken or weak follower spring

Faulty magazine lips

Faulty magazine catch

Broken magazine catch

Improperly fitted magazine

Insufficient gas impact

Change magazine

Change magazine

Change magazine

Replacement by armorer

Replacement by armorer

Tap the magazine upwar~

Clean all gas passages

)3

ProblemWon't fire

Won't extract or eject

Faulty hammer springFaulty or broken firing pinBroken automatic sear springBolt doesn't lock properlyDirty chamber

Faulty or broken automatic searFaulty or broken return springBroken extractor

Replacement by armorerReplaceReplacement by armorerClean dirty partsCleanReplacement by armorerReplaceReplace

33

Index No. Description Index No. Description

1 Flash Supressor 21 Spring, Disconnector2 Retaining Ring, Supressor 22 Automatic Sear, Lever3 Barrel 23 Automatic Sear4 Bayonet Catch 24 Selector Lever, Right5 Gas Block 25 Link, Selector Lever6 Front Holder, Hand Guard 26 Selector Lever, Left7 Screw, Set, Front Sight 27 Nut, Pistol Grip8 Base, Front Sight 28 Spring, Trigger9 Post, Front Sight 29 Pin, Pivot, Receiver10 Spring 30 Pistol Grip11 Spring, Front Night Sight 31 Screw, Pistol Grip12 Pin, Front Sight 32 Spring Pin, Stock13 Front Night Sight 33 Stock Base14 Rear Holder, Hand Guard 34 Spring, Stock15 Receiver 35 Pin, Pivot, Stock16 Retaining Spring, Pins 36 Retaining Ring, Stock17 Trigger 37 Stock18 Hammer 38 Gas Cylinder19 Spring, Hammer 39 GasPiston20 Disconnector 40 Pin, GasPiston

34

Index No. DescriptionIndex No. Description41 80lt Carrier 61

Retaining Ring, Pin, 8ipod Connector42 Extractor

62 Pin, Pivot, 8ipod Connector43 Spring, Extractor 63 8ipod Connector44 Pin, Extractor 64 Pin, Gas 810ck45 Pin,80lt 65 Spring Pin, 8ipod Head46 80lt 66 Spring Pin, 8ipod Leg47 Firing Pin 67 8ipod Head48 Ring, Guide Rod 68 Left Leg, 8ipod49 8uffer Retainer 69 Spring, 8ipod50 Guide Rod 70 Right Leg, 8ipod51 Return Spring 71 Hand Guard52 Screw, Pivot, Rear Sight 72 Spring, Hand Guard53 Cover 73 Follower54 Spring, Rear Night Sight 74 Spring, Magazine55 Plunger, Rear Night Sight 75 Plate, Spring, Magazine56 Pin, Rear Night Sight 76 80ttom Plate, Magazine57 Rear Night Sight 77 Magazine, 20 Rounds58 8all, Rear Sight 78 Pin, Pivot, Magazine Catch59 Spring, Rear Sight 79 Magazine Catch60 Rear Sight 80 Spring, Magazine Catch35

rifl

L1

II

~..\31

57r~--~-

i 55lj..l!.~P: 54 fJ58:

,,. .1. :

48 i---. ~-VUU~JP~-~- (If) I~ lIM

/11