Upload
nguyentuyen
View
219
Download
0
Embed Size (px)
Citation preview
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
C E I L I N G , W A L L A N D F L O O R C L I P S
Edition 2007 / UK
BSA
BSF-D
KB
BK
BMA
������
������1
Flamco Ceiling, Wall and Floor Clips
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
ilin
g,
Wa
ll a
nd
Flo
or
Cli
ps
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.2
������
C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s
Click here for the Flamco BS clip which fits e very type of pipeFlamco offers you a wide range of BS clips for all types of pipe.
That applies to the range of clips from 12 mm to 16 plus the countless
connection options from M 8 - M 12, ‘combinut’, and 1/2.
It also applies in relation to the various types of
rubber for special applications.
BSA clips are available with a large number of different connections.
The advantages of
Flamco BSA clips:
◆ Patented locking system ensures
rapid assembly.
◆ Minimal headroom requirement
permits pipes to be installed
directly under the ceiling.
◆ Stout clip material ensures both
stability and rigidity.
◆ Rubber inlay with four air chambers
for substantial noise reduction
(19 dB(A).
◆ Rubber inlay clamped to the clip.
Should the pipe move in any way,
the rubber will not be displaced:
it will remain fi rm at all times.
◆ High temperature resistance of the
rubber: from - 40 °C to + 120 °C.
The mounting nut has a combined groove /cross-head.
The click-in spring for easy pre-assembly without the need for tools and without the pipe coming away from the clip.
Table with types and technical information: page 1.10 – 1.16. See also the BSL-A (page 7.3) and the BRS-A (page 9.3).
Flamco R rail and accessories: pages 6.2 – 6.5.
FSS ClickFit: page 6.4.
RD rail end caps: page 6.2.
D threaded rods: page 8.7.
Rigid or fl exible clips: pages 8.2 – 8.5.
BSA
Flamco BS clips have a universal fi tting.
It is possible to mount these clips both
vertically and horizontally.
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
iling
, Wa
ll an
d F
loo
r Clip
s
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.3P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.3P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.3
Click here for the Flamco BS clip which fits e very type of pipe
BSA-S
Extra BSA-S feature:
◆ Fitted with special heat
resistant rubber: resistant
from – 60 °C to + 250 °C.
Extra BSA-N feature:
◆ Fitted with fl ame retardant
rubber which does not drip or
melt, guaranteeing a long and
safe service life.
Flamco BSI
◆ Fitted with noise suppressing
rubber lining.
◆ Reinforcing grooves maintain
lining shape.
◆ Fitted with combination
M 8 / M 10 connection.
◆ Suitable for installations with
restricted space; bolt features
screw-cross-head.
◆ Fitted with two bolts with anti-
loss ring.
Flamco BSB
◆ One-piece clip with noise
suppressing rubber lining.
◆ Fitted with M 8 thread
connection.
◆ Available in diameters from 1/8 to 2
◆ Quick-locking system.
◆ Suitable for installations
with restricted space; bolt
features screw-cross-head.
BSA-N BSA-G CLICKIN BSA
BSI BSB
Extra BSA-G feature:
◆ Fitted with smooth rubber for
attaching around plastic pipe.
◆ Spacer in the click-in spring
lock prevents over-tightening of
the clip.
Extra ClickIn BSA features:
◆ Part of the Flamco Smart
System: page 5.5.
◆ No more de-burring of the
threaded rod.
◆ Insert threaded end in nut;
do not screw.
◆ Twist the clip to the correct
position.
◆ Fitted in no time!
◆ Patented system.
RWA-G, RWB-G and
RWC-G
◆ Clips fi tted with noise-
reducing EPDM rubber
insert.
◆ RWA-G clips complete
with screws and nuts.
RWB-G and RWC-G clips
fi tted with six-sided bolts
with saw slot.
◆ RWC-G clips with M 10
connection.
RWA-G
Flamco BSH
◆ Fitted with noise suppressing
rubber lining.
◆ Reinforcing grooves maintain
lining shape.
◆ Fitted with combination
M 8 / M 10 connection.
◆ Suitable for installations with
restricted space; bolt features
screw-cross-head.
◆ Quick-locking system.
BSH
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
ilin
g,
Wa
ll a
nd
Flo
or
Cli
ps
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.4
������
C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s
BS clips without rubber lining and other types of clips for numerous fixing options
BSF
On these pages we show you a number of other mounting options. First of all,
the BSF and BSU clips for universal fitting. The BSF and BSF-D clips are
characterised by a wide range of sizes from 3/8 to 16 in combination with a
possibility of very close-fitting sizes. The BSU clip, with its range from 1/2 to 6 similarly offers close-fitting versions.
The advantages of
Flamco BSF clips:
◆ For horizontal mounting to
the wall or for vertical
mounting beneath the ceiling.
◆ Suitable for confi ned spaces.
◆ Suitable for heavy loads and
high temperatures.
◆ BSF clips in M 10, M 12,
M 16 and 1/2 versions, fi tted
with anti-loss ring.
◆ Range from 3/8 to 16.
Table with types and technical information: page 1.17 – 1.25. See also the BSG (page 4.2), BRS (page 9.3) and BSL clips (page 7.2).
Flamco R rail and accessories: pages 6.2 – 6.5.
RD rail end caps: page 6.2.
Locknut:page 6.3.
Washers: page 6.3.
Threaded rods: page 8.7.
BSF clip for universal mounting.
Flamco offers the best clip ideal fi xing for every requirement.
BSF-D
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
iling
, Wa
ll an
d F
loo
r Clip
s
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.5P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.5P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.5
BS clips without rubber lining and other types of clips for numerous fixing options
BSU
BSF-D
KB
PC
VARIOFIT KS
BSP fixed point clips
◆ Suitable for fixed-point
constructions such as
in combination with the
VH connecting corners
(page 6.5 and 6.10) or the
VG angular plate (page
8.3 and 8.9).
◆ Suitable for very high
loads.
◆ With extra long lugs for
fixing.
KB clips
◆ Suitable for fixed point
constructions.
◆ Suitable for very high
loads.
◆ According to DIN 3567.
◆ Specially intended for
mounting heavy pipes
e.g. rising mains.
PC plug clip
◆ For use with floor-
heating and plastic
pipes.
◆ For simple mounting on
the floor.
Variofit plastic clips
◆ For mounting copper or
thin-walled steel pipes.
Can be used with Flamco
rail R1, R 2, R 3 and R 4.
◆ Hinged click connections
and equal centre to wall
distances for the Variofit
12 - 15 and 22 - 28.
KS clips
◆ For horizontal or vertical
fitting of copper pipes.
◆ Single and double
versions.
◆ Fast mounting.
◆ High-quality polypropy-
lene material provides
excellent noise damping.
◆ Available in white or
chrome-finish.
Extra BSF-D feature:
◆ The BSF-D has an
additional lower nut to
permit further clips to
be installed beneath,
(subject to overall design
loads).
RWA, RWB and RWC clips
◆ RWA clips complete with
screws and nuts.
◆ RWB and RWC clips fitted
with six-sided bolts with
saw slot.
◆ RWC clips with M 10
connection.
Omega clips
◆ Basic version, particu-
larly suitable for flush
fitting to walls.
◆ Fast and easy fitting.
UB clips
◆ Heavy-duty clip for
mounting steel pipes
directly to Flamco rail
or other surfaces.
◆ Threaded connection
from M 6 to M 16.
◆ Supplied complete with
4 nuts.
RWA OMEGA UB
Fitted with brass
mounting nut,
c. 5 mm adjustable.
Flamco BSU
◆ For horizontal mounting
to the wall or for vertical
mounting beneath the
ceiling.
◆ Reinforcing grooves
maintain lining shape.
◆ Fitted with either combi-
nation M 8 / M 10 or
M 10 / M 12 connection.
◆ Suitable for installations
with restricted space;
bolt features screw-
cross-head.
BSP
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
ilin
g,
Wa
ll a
nd
Flo
or
Cli
ps
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.6 C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s
FlamcoAnd that’s not all! See what other benefits the BK series offers!
1. Manually open the
clip and place it
around the pipe.
2. Close the clip
around the pipe
and the ball joint.
3. Now slide the sleeve
downwards and ...
Ready!
The advantages of
the Flamco BK clip series:
◆ The one-piece clip can withstand
a very high load.
◆ The integral ball and socket design
compensates for any movement
or expansion in the pipe.
◆ Up to 12º of movement.
◆ The length of the sleeve permits
insulation of the pipe without
restriction to the ball joint.
Assembly without any tools
The ball joint offers movement of maximum 2 x 6° and thus makes an additional ball hanger on the clip unnecessary. It also requires none, or fewer, fi xed points.
Table with types and technical information: page 1.26 – 1.31. See also the support half ST (page 8.6).
Ball hanger:page 8.2 - 8.3.
Threaded rod:page 8.7.
Cap for sealing the ball joint: page 1.7.
BKI clip with rubber lining: page 1.7.
BO / BOK connectors for mounting BK clips beneath one another: page 1.7.
Support half: page 8.6.
Rail end cap for a neat fi nish:
page 6.2.
Flamco rail in black or galvanised:
page 6.2 - 6.3.
FSS ClickEasy: page 5.5.
All BK series pipe hangers are quickly and eas ily fitted without tools
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
iling
, Wa
ll an
d F
loo
r Clip
s
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.7P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.7P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.7
BK
SOCKET T
BKI BKK BKP BKR
BO / BOK BSC LB SR
Additional
characteristics of BK:
◆ For mounting threaded
pipe, sprinkler pipe and
thin-walled steel pipe.
◆ Sendzimir clip
(BK 12 electrolytically
zinc-plated).
Additional characteristics
of BKI:
◆ Supplied with a noise
suppressing rubber
lining.
◆ For pipe sizes greater
than 219.1 mm,
a BK clip can be used
with a separate rubber
lining strip SR.
◆ Sendzimir clip
(BK 12 electrolytically
zinc-plated).
Additional characteristics
of BKK:
◆ For mounting copper
pipe work.
◆ Clip copper. Sleeve and
ball joint electrolytically
zinc-plated.
Additional characteristics
of BKP:
◆ For mounting plastic
pipe work.
◆ Sendzimir clip.
Additional characteristics
of BKR:
◆ For mounting cast-
iron sewage piping.
◆ Clip up to 8 x 125
sendzimir, larger
sizes electrolytically
zinc-plated.
◆ From BKR 8 x 150
with a clamp on the
inside of the sleeve.
T Cap
◆ Water and dust tight
sealing of the ball joint
which guarantees
freedom of movement.
◆ Holds the sleeve
firmly allowing both
hands to be free
for assembling.
Connector BO / BOK
◆ For mounting certain
BK seriesclips beneath
one another whilst
maintaining the
flexibility
of the
suspension.
BSC clips
◆ Suitable for mounting to
the ceiling and to (rail)
constructions.
◆ The one-piece clip can
withstand a very high
load.
◆ Mounting with EB 25 or
EB 18.
Mounting tape LB
◆ The plastic covering is
stuck to the steel core,
so that it cannot slide.
◆ Simply cut to the right
length.
◆ High mechanical tension
and can be fitted easily
and quickly.
Noise suppression
strips SR
◆ Noise suppressing
lining for clips.
◆ When the SR strip is
used the associated
clip chosen must be
larger than the out-
side diameter of the
pipe to be fitted.
EB
All BK series pipe hangers are quickly and eas ily fitted without tools
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
ilin
g,
Wa
ll a
nd
Flo
or
Cli
ps
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.8
������
C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s
BM and DP clips give you a perfect mounting and a smooth finishFlamco BM clips are made up of three parts, namely the one-piece clip,
the sleeve, and a nut. The sleeve has three characteristics. The leading
edge is fl ared to permit easy location. The trailing edge is domed and acts
as a travel stop for the nut. Finally, its overall conical shape ensure secure
fi xture. Thanks to these technical features, BM clips are very easy to mount
correctly.
DP double pipe clips.
Version hk with short wood screw and plastic plug.
BMA clip with rubber lining.
Flamco rail in black or galvanised: page 6.2 - 6.3.
Hammer head bolt set: page 6.3.
This is how easy it is to mount the Flamco BM clip
Fit wood screw.
Open clip and bend it round the pipe.
Push on sleeve.
Tighten nut and ... Ready!
1
2
3
4
BM wall clips are available
in three versions
Without wood screw. To connect to rail
with hammer head bolt set, threaded
tube, or an insert pin.
With short wood screw and
plastic plug.
Fitted with a long wood
screw and plastic plus.
Execution su
Execution hk
Execution hl
1
The advantages of
Flamco BM clips:
◆ The one-piece clip can
withstand a very high load.
◆ Threaded wood screw with torx
connection so that these can
be screwed with a hand drill.
◆ The clip covers the screws so
that they are hidden from sight.
◆ Perfect fi nish and rigid
mounting. Allows the pipe
to expand.
BMK clip for copper pipes.
Table with types and technical information: page 1.32 - 1.35. See also clips for rain drainage (page 4.2 - 4.4).
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
iling
, Wa
ll an
d F
loo
r Clip
s
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.9P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.9P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.9
BM and DP clips give you a perfect mounting and a smooth finish
2 3 4
BM
DP WITH L INING
BMA BMK
DP SINGLE DP DOUBLE PIPE SUPPORT
Additional characteristics of BM:
◆ For mounting threaded pipe,
sprinkler pipe and thin-walled
steel pipe.
◆ Clip sendzimir, other parts
electrolytically zinc-plated.
Additional characteristics of BMA:
◆ Supplied with a noise suppressing
rubber lining.
◆ For mounting threaded pipe,
sprinkler pipe, thin-walled steel
and copper pipe.
RWK, RWK-G and RWS clips
◆ Particularly suitable for visible
wall mounting with wire tack
(diameter 8 mm).
◆ RWK-G fitted with noise-
reducing EPDM rubber insert
for temperatures from
– 40 °C to + 120 °C.
◆ With six-sided nut with saw
slot for quick and easy fitting.
RWS with two six-sided nuts
with saw slot.
DP single pipe clip
◆ For mounting (thin-walled) steel
pipes.
◆ Adjustable depth.
◆ Loosening or tightening the
bolt is possible with spanner or
screwdriver.
DP double pipe clips
◆ For mounting (thin-walled) steel
pipes.
◆ Adjustable depth, fixed pipe
centres.
◆ Supplied with a reinforced
backplate with a slot of
18 x 8 mm.
Angle support
◆ DP double pipe clips can be
mounted from the floor at three
different centres.
◆ Slots 30 x 6.5 mm for mounting
the DP double pipe clip.
◆ Slots 20 x 8.5 mm for mounting
to the floor.
DP double pipe clips with lining
◆ For mounting (thin-walled) steel
pipes.
◆ Fitted with a sound suppres-
sing grey neoprene lining that is
glued in the clip.
◆ Adjustable depth, fixed pipe
centres.
Additional characteristics of BMK:
◆ For mounting copper pipe work.
◆ Clip sendzimir, other parts
electrolytically zinc-plated.
RWS
RWK
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
ilin
g,
Wa
ll a
nd
Flo
or
Cli
ps
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.10
������
C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s
Flamco BSA clips for all types of pipes and Flamco BSA-S clips with temperature resistant rubber
◆ Fast assembly thanks to the patented locking system with click-spring.
◆ Easy pre-assembly without the need for tools and without the pipe coming away from
the clip.
◆ Minimal headroom requirement making it possible to mount pipes directly to the ceiling.
◆ Stout material ensures stability and rigidity.
◆ BSA-S fitted with special heat resistant rubber: resistant from – 60 °C to + 250 °C.
Types and dimensions BSA cl ipsType Ext. dia.
of pipefrom - to
Threadedtubedia.
Threaded connection Max.working
load
Max. wor-king load* 19 dB(A)
Stripdimen-sions
Code number
in mm in inches M 8 M 10 M 8/10 M 12 M 16 1/2 1/2 / M 10 in N in N in mm M 8 M 10 M 8/10 M 12 M 16 1/2 1/2 M 10
Types and dimensions BSA-S clipsType Ext. dia.
of pipefrom - to
Threadedtubedia.
Threadedconnection
Max.working
load
Max. wor-king load*19 dB(A)
Stripdimensions
Codenumber
in mm in inches in N in N in mm
BSA 12 - 13.5 12 - 13.5 1/4 M 8 - M 8/10 - - - 1/2 / M 10 1300 600 25 x 1.75 39200 - 39300 - - - 51900BSA 14 - 16 14 - 16 - M 8 - M 8/10 - - - 1/2 / M 10 1300 600 25 x 1.75 39201 - 39301 - - 51901BSA 17 - 19 17 - 19 3/8 M 8 - M 8/10 M 12 - 1/2 1/2 / M 10 1300 600 25 x 1.75 39202 - 39302 39272 - 39222 51902BSA 20 - 24 20 - 24 1/2 M 8 - M 8/10 M 12 - 1/2 1/2 / M 10 1300 600 25 x 1.75 39203 - 39303 39273 - 39223 51903BSA 25 - 28 25 - 28 3/4 M 8 - M 8/10 M 12 - 1/2 1/2 / M 10 1300 600 25 x 1.75 39204 - 39304 39274 - 39224 51904BSA 29 - 33 29 - 33 - M 8 - M 8/10 - - - 1/2 / M 10 1300 600 25 x 1.75 39205 - 39305 - - 51905BSA 33 - 37 33 - 37 1 M 8 - M 8/10 M 12 - 1/2 1/2 / M 10 1300 600 25 x 1.75 39206 - 39306 39276 - 39226 51906BSA 38 - 42 38 - 42 11/4 M 8 - M 8/10 M 12 - 1/2 1/2 / M 10 1300 600 25 x 1.75 39207 - 39307 39277 - 39227 51907BSA 44.5 - 49 44.5 - 49 11/2 M 8 - M 8/10 M 12 - 1/2 1/2 / M 10 1300 600 25 x 1.75 39208 - 39308 39278 - 39228 51908BSA 50 - 54 50 - 54 - M 8 - M 8/10 M 12 - - 1/2 / M 10 1300 600 25 x 1.75 39209 - 39309 39279 - - 51909BSA 56 - 60 56 - 60 2 M 8 - M 8/10 M 12 - 1/2 1/2 / M 10 1300 600 25 x 1.75 39210 - 39310 39280 - 39230 51910BSA 62 - 64 62 - 64 - M 8 - M 8/10 M 12 - - 1/2 / M 10 2000 1200 25 x 2.75 39550 - 39311 39231 - 51920BSA 68 - 73 68 - 73 - M 8 - M 8/10 M 12 - 1/2 1/2 / M 10 2000 1200 25 x 2.75 39551 - 39312 39232 - 39351 51921BSA 75 - 80 75 - 80 21/2 M 8 - M 8/10 M 12 - 1/2 1/2 / M 10 2000 1200 25 x 2.75 39552 - 39313 39233 - 39352 51922BSA 82 - 86 82 - 86 - M 8 - M 8/10 M 12 - - 1/2 / M 10 2000 1200 25 x 2.75 39553 - 39314 39235 - 51923BSA 89 - 91 89 - 91 3 M 8 - M 8/10 M 12 - 1/2 1/2 / M 10 2000 1200 25 x 2.75 39554 - 39315 39236 - 39354 51924BSA 95 - 102 95 - 102 31/2 M 8 - M 8/10 M 12 - - 1/2 / M 10 2000 1200 25 x 2.75 39556 - 39317 39237 - 51926BSA 108 - 116 108 - 116 4 M 8 M 10 M 8/10 M 12 - 1/2 1/2 / M 10 2000 1200 25 x 2.75 39558 39557 39318 39238 - 39356 51927BSA 121 - 127 121 - 127 - - M 10 M 8/10 M 12 - - 1/2 / M 10 2000 1200 25 x 2.75 - 39559 39320 39240 - 51929BSA 133 - 141 133 - 141 5 - M 10 M 8/10 M 12 - 1/2 1/2 / M 10 2000 1200 25 x 2.75 - 39560 39321 39241 - 39360 51930BSA 159 - 162 159 - 162 - - M 10 M 8/10 M 12 - 1/2 1/2 / M 10 2000 1200 25 x 2.75 - 39562 39323 39243 - 39361 51932BSA 165 - 168 165 - 168 6 - M 10 M 8/10 M 12 - 1/2 1/2 / M 10 2000 1200 25 x 2.75 - 39563 39324 39244 - 39362 51933BSA 213 - 219 213 - 219 8 - - - - M 16 - - 3000 1200 25 x 3 - - - - 39253 - -BSA 267 - 273 267 - 273 10 - - - - M 16 - - 9000 3000 50 x 5 - - - - 39254 - -BSA 315 - 321 315 - 321 12 - - - - M 16 - - 9000 4000 50 x 5 - - - - 39255 - -BSA 350 - 356 350 - 356 14 - - - - M 16 - - 9000 5000 50 x 5 - - - - 39256 - -BSA 400 - 406 400 - 406 16 - - - - M 16 - - 9000 6000 50 x 5 - - - - 39257 - -
BSA-S 12 - 13.5 12 - 13.5 1/4 M 8 1300 600 25 x 1.75 39110BSA-S 14 - 16 14 - 16 - M 8 1300 600 25 x 1.75 39111BSA-S 17 - 19 17 - 19 3/8 M 8 1300 600 25 x 1.75 39112BSA-S 20 - 24 20 - 24 1/2 M 8 1300 600 25 x 1.75 39113BSA-S 25 - 28 25 - 28 3/4 M 8 1300 600 25 x 1.75 39114BSA-S 29 - 33 29 - 33 - M 8 1300 600 25 x 1.75 39115BSA-S 33 - 37 33 - 37 1 M 8 1300 600 25 x 1.75 39116BSA-S 38 - 42 38 - 42 11/4 M 8 1300 600 25 x 1.75 39117BSA-S 44.5 - 49 44.5 - 49 11/2 M 8 1300 600 25 x 1.75 39118BSA-S 50 - 54 50 - 54 - M 8 1300 600 25 x 1.75 39119BSA-S 56 - 60 56 - 60 2 M 8 1300 600 25 x 1.75 39120BSA-S 62 - 64 62 - 64 - M 8 2000 1200 25 x 2.75 39565BSA-S 68 - 73 68 - 73 - M 8 2000 1200 25 x 2.75 39566BSA-S 75 - 80 75 - 80 21/2 M 8 2000 1200 25 x 2.75 39567BSA-S 82 - 86 82 - 86 - M 8 2000 1200 25 x 2.75 39568BSA-S 89 - 91 89 - 91 3 M 8 2000 1200 25 x 2.75 39569BSA-S 95 - 102 95 - 102 31/2 M 8 2000 1200 25 x 2.75 39570BSA-S 108 - 116 108 - 116 4 M 10 2000 1200 25 x 2.75 39571BSA-S 121 - 127 121 - 127 - M 10 2000 1200 25 x 2.75 39572BSA-S 133 - 141 133 - 141 5 M 10 2000 1200 25 x 2.75 39573BSA-S 159 - 162 159 - 162 - M 10 2000 1200 25 x 2.75 39574BSA-S 165 - 168 165 - 168 6 M 10 2000 1200 25 x 2.75 39575
* To achieve good sound suppression do not overload the fi tting.
* To achieve good sound suppression do not overload the fi tting.
BSA/BSA-S 12-13,5 - 56-60
BSA/BSA-S 62-64 - 400-406
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
iling
, Wa
ll an
d F
loo
r Clip
s
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.11P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.11P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.11P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.11P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.11
������ Flamco BSA-N clips with flame retardant rubber (neoprene) and BSA-G clips with smooth rubber for plastic pipes
◆ BSA-N clips are fitted with flame retardant rubber which does not drip or melt,
ensuring a long and safe service life.
◆ Fitted with smooth rubber for attaching around a plastic pipe.
◆ Spacer in the click-in spring lock prevents over-tightening of the BSA-G clip.
Types and dimensions BSA-N cl ips Type Ext. dia
of pipefrom - to
Threadedtube dia.
Threadedconnection
Max. working load
Max. workingload*
19 dB(A)
Stripdimensions
Codenumber
in mm in inches in N in N in mm
Types and dimensions BSA-G cl ips Type Pipe size
ext. dia.Threaded
connectionMax.
workingload
Stripdimensions
Codenumber
in mm in N in mm
BSA-N 12 - 13.5 12 - 13.5 1/4 M 8 1300 600 25 x 1.75 39130BSA-N 14 - 16 14 - 16 - M 8 1300 600 25 x 1.75 39131BSA-N 17 - 19 17 - 19 3/8 M 8 1300 600 25 x 1.75 39132BSA-N 20 - 24 20 - 24 1/2 M 8 1300 600 25 x 1.75 39133BSA-N 25 - 28 25 - 28 3/4 M 8 1300 600 25 x 1.75 39134BSA-N 29 - 33 29 - 33 - M 8 1300 600 25 x 1.75 39135BSA-N 33 - 37 33 - 37 1 M 8 1300 600 25 x 1.75 39136BSA-N 38 - 42 38 - 42 11/4 M 8 1300 600 25 x 1.75 39137BSA-N 44.5 - 49 44.5 - 49 11/2 M 8 1300 600 25 x 1.75 39138BSA-N 50 - 54 50 - 54 - M 8 1300 600 25 x 1.75 39139BSA-N 56 - 60 56 - 60 2 M 8 1300 600 25 x 1.75 39140BSA-N 62 - 64 62 - 64 - M 8 2000 1200 25 x 2.75 39578BSA-N 68 - 73 68 - 73 - M 8 2000 1200 25 x 2.75 39579BSA-N 75 - 80 75 - 80 21/2 M 8 2000 1200 25 x 2.75 39580BSA-N 82 - 86 82 - 86 - M 8 2000 1200 25 x 2.75 39581BSA-N 89 - 91 89 - 91 3 M 8 2000 1200 25 x 2.75 39582BSA-N 95 - 102 95 - 102 31/2 M 8 2000 1200 25 x 2.75 39583BSA-N 108 - 116 108 - 116 4 M 10 2000 1200 25 x 2.75 39584BSA-N 121 - 127 121 - 127 - M 10 2000 1200 25 x 2.75 39585BSA-N 133 - 141 133 - 141 5 M 10 2000 1200 25 x 2.75 39586BSA-N 159 - 162 159 - 162 - M 10 2000 1200 25 x 2.75 39587BSA-N 165 - 168 165 - 168 6 M 10 2000 1200 25 x 2.75 39588
* To achieve good sound suppression do not overload the fi tting!
BSA-N
BSA-G
BSA-G 16 16 M 8 1300 25 x 1.75 39151BSA-G 20 20 M 8 1300 25 x 1.75 39153BSA-G 25 25 M 8 1300 25 x 1.75 39154BSA-G 32 32 M 8 1300 25 x 1.75 39155BSA-G 40 40 M 8 1300 25 x 1.75 39157BSA-G 50 50 M 8 1300 25 x 1.75 39158BSA-G 56 56 M 8 1300 25 x 1.75 39159BSA-G 63 63 M 8 1300 25 x 1.75 39160BSA-G 75 75 M 8 2000 25 x 2.75 39590BSA-G 90 90 M 8 2000 25 x 2.75 39593BSA-G 110 110 M 10 2000 25 x 2.75 39595BSA-G 125 125 M 10 2000 25 x 2.75 39596BSA-G 160 160 M 10 2000 25 x 2.75 39598
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
ilin
g,
Wa
ll a
nd
Flo
or
Cli
ps
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.12
������
C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s
Selection table for BSA, BSA-S and BSA-N clips
◆ Using the table below, you can easily find the right type of BSA, BSA-S,
or BSA-N clip for the type and dimension of pipes you require.
Select ion table for BSA, BSA-S and BSA-N cl ipsType Threaded tube
DIN 2240/2441
Fire tubeDIN 2448/2458
2460/2461
Copperpipe
DIN 1786
ML pipeSML pipeDIN 19522
LORO X
nom.dia.
in inchesext. dia.in mm
nom.dia.
in mmext. dia.in mm
ext. dia.in mm
nom.dia.
in mmext. dia.in mm
nom.dia.
in mmext. dia.in mm
12.5 - 13.5 1/4 13.5 - 13.5 12 - - - - 14.5 - 16.5 - - - 16.5 15 - - - - 17.5 - 19.5 3/8 17.2 10 17.2 18 - - - - 20.5 - 24.5 1/2 21.3 15 20.5 22 - - - - - - 15 21.3 - - - - - 25.5 - 28.5 3/4 26.9 20 25.5 28 - - - - - - 20 26.9 - - - - - 29.5 - 33.5 - - 25 30.5 - - - - - - - - 31.8 - - - - - 33.5 - 37.5 1 33.7 25 33.7 35 - - - - 38.5 - 42.5 11/4 42.4 32 38.5 42 - - 40 42 - - 32 42.4 - - - - - 44.5 - 49.5 11/2 48.3 40 44.5 48 - - - - - - 40 48.3 - - - - - 50.5 - 54.5 - - - 51.5 54 - - 50 53 56.5 - 60.5 2 60.3 50 57.5 - 50 58 - - - - 50 60.3 - - - - - 62.5 - 64.5 - - - 63.5 64 - - - - 68.5 - 73.5 - - - 70.5 68 - - 70 73 - - - - 70 - - - - 75.5 - 80.5 21/2 76.1 65 76.1 76 70 78 - - - - - - 80 - - - - 82.5 - 86.5 - - - 82.5 85 - - - - 89.5 - 91.5 3 88.9 80 88.9 89 - - 80 89 95.5 - 102.5 31/2 - - 95.5 100 - - 100 102 - - - 101.6 - - - - -108.5 - 116.5 4 114.3 100 108.5 108 100 110 - - - - 100 114.3 - - - - -121.5 - 127.5 - - - 121.5 - - - - - - - - 127.5 - - - - -133.5 - 141.5 5 139.7 125 133.5 133 125 135 125 133 - - 125 139.7 - - - - -159.5 - 162.5 - - 150 159.5 159 150 160 150 159165.5 - 168.5 6 165.1 150 165.1 - - - - - - - - 168.3 - - - - -
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
iling
, Wa
ll an
d F
loo
r Clip
s
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.13P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.13P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.13P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.13P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.13
������ Selection table for BSA, BSA-S and BSA-N clips
◆ Using the table below you can easily find the right type of BSA, BSA-S,
or BSA-N clip for the type and dimension of pipes you require.
Select ion table for BSA, BSA-S and BSA-N cl ipsType PVC pipe PE pipe
GeberitWicu Specialcopper pipe
Wicu Extracopper pipe
Thin-walledsteel pipeDIN 2391
Vulcathene
ext. dia.in mm
ext. dia.in mm
wallthickness
in mmext. dia.in mm
wallthickness
in mmext. dia.in mm
ext. diain mm
ext. dia.in mm
12.5 - 13.5 12 - 8 x 1.5 12 - - - 12 14.5 - 16.5 16 - 10 x 1.5 14 - - 16 16 - - 12 x 1.5 16 - - - - 17.5 - 19.5 20 20 15 x 1.5 19 - - 18 - 20.5 - 24.5 - - 18 x 1.5 23 - - 20 20 25 25 - - - - 22 - 25.5 - 28.5 - - 22 x 1.5 27 12 x 1.5 26 25 25 32 32 - - - - 28 - 29.5 - 33.5 - - 28 x 1.5 33 15 x 1.5 29 30 32 - - - - 18 x 1.5 32 32 - 33.5 - 37.5 - - - - 12 x 1.5 33 5 - - - - - 15 x 1.5 37 - - 38.5 - 42.5 40 40 35 x 1.5 40 18 x 1.5 41 38 40 - - - - - - 40 - 44.5 - 49.5 - - 42 x 1.5 48 22 x 1.5 46 45 - - - - - - - 48 - 50.5 - 54.5 50 50 - - - - 50 50 56.5 - 60.5 - 56 54 x 2.5 60 - - 55 - - - - - - - 60 - 62.5 - 64.5 63 63 - - 28 x 1.5 64 63 63 68.5 - 73.5 - - - - 35 x 1.5 72 70 - 75.5 - 80.5 75 75 - - - - 80 75 82.5 - 86.5 - - - - - - - - 89.5 - 91.5 90 90 - - 42 x 1.5 91 90 90 95.5 - 102.5 - - - - - - 100 -108.5 - 116.5 110 110 - - 54 x 2.5 116 110 110121.5 - 127.5 125 125 - - - - 120 125133.5 - 141.5 - - - - - - - -159.5 - 162.5 160 160 - - - - - 160165.5 - 168.5 - - - - - - - -
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
ilin
g,
Wa
ll a
nd
Flo
or
Cli
ps
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.14
������
C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s
Flamco BSB clips with quick locking system
◆ The BSB clip is a single-part clip with noise suppressing rubber inlay.
◆ Suitable for confined spaces; bolt features screw-cross-head.
◆ Fitted with quick-locking system.
Types and dimensions BSA cl ipsType Ext. dia.
of pipefrom - to
Threaded connection
Max.working load
Max.working load **
16 dB(A)
Strip dimensions
Codenumber
in mm in N in N in mm
Types and dimensions BSB cl ipsType Threaded tube
DIN2440/2441
Fire tubeDIN
2448/24582460/2461
Copperpipe
DIN 1786
Wicu Specialcopper pipe
Thin-walledsteelpipe
DIN 2391nom.dia.
in inchesext. dia.in mm
nom.dia.
in mmext. dia.in mm
ext. dia.in mm
wall thickness
in mmext. dia.in mm
ext. dia.in mm
BSB 8 x 1/8 - 10 1/8 10.2 - 10.2 - - - -BSB 8 x 1/4 - 12 1/4 13.5 - 13.5 12 8 x 1 12 -BSB 8 x 15 - - - - 15 10 x 1 14 16 - - - - - 12 x 1 16 -BSB 8 x 3/8 - 18 3/8 17.2 10 17.2 18 15 x 1 19 18BSB 8 x 1/2 - 22 1/2 21.3 15 20.2 22 18 x 1 23 20 - - 15 21.3 - - - 22BSB 8 x 3/4 - 28 3/4 26.9 20 26.9 28 22 x 1 27 28BSB 8 x 1 - 35 1 33.7 25 33.7 35 - - 35BSB 8 x 11/4 - 42 11/4 42.4 32 42.4 42 - - -BSB 8 x 11/2 - 48 11/2 48.3 40 48.3 48 42 x 1.5 48 48BSB 8 x 54 - - - - 54 - - -BSB 8 x 2 - 60 2 60.3 50 60.3 - 54 x 2 60 60
BSB 8 x 1/8 - 10 9 - 10 M 8 650 40 18 x 1.0 39610BSB 8 x 1/4 - 12 11 - 13 M 8 650 40 18 x 1.0 39612BSB 8 x 15 14 - 16 M 8 650 40 18 x 1.0 39615BSB 8 x 3/8 - 18 17 - 20 M 8 650 40 18 x 1.0 39600BSB 8 x 1/2 - 22 21 - 24 M 8 650 60 18 x 1.0 39601BSB 8 x 3/4 - 28 26 - 29 M 8 650 80 18 x 1.0 39602BSB 8 x 1 - 35 33 - 36 M 8 650 120 18 x 1.0 39603BSB 8 x 11/4 - 42 41 - 44 M 8 650 160 18 x 1.0 39604BSB 8 x 11/2 - 48 47 - 50 M 8 650 200 18 x 1.0 39605BSB 8 x 54 53 - 56 M 8 650 250 18 x 1.0 39654BSB 8 x 2 - 60 60 - 62 M 8 650 300 18 x 1.0 39606
* To achieve good sound suppression do not overload the fi tting.
BSB
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
iling
, Wa
ll an
d F
loo
r Clip
s
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.15P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.15P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.15P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.15P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.15
������ Flamco BSH clips with quick-locking system and BSI clips with anti-loss ring
◆ BSH and BSI clips are both fitted with a sound suppressing rubber lining.
◆ Reinforcement grooves ensure that BSH and BSI clips maintain their shape.
◆ BSH and BSI clips are ideal for confined spaces; fixing bolt features screw-cross-head.
◆ BSI clips fitted with two bolts with anti-loss ring.
◆ BSH clips fitted with quick-locking system.
Types and dimensions BSI cl ipsType Ext. dia.
of pipefrom - to
Threadedtube dia.
Threaded connection Max. working
load
Max. working load*
16 dB(A)
Strip dimen-sions
Code number
in mm in inches M 8/10 M 10/12 N N in mm M 8/10 M 10/12
Types and dimensions BSH cl ipsType Ext. dia.
of pipefrom - to
Threadedtubedia.
Threaded connection
Max. working load
Max. working load*
15 dB(A)
Stripdimensions
Code number
in mm in inches M 8/10 in N in N in mm M 8/10
* To achieve good sound suppression do not overload the fi tting.
BSI 8 - 10 8 - 10 - M 8/10 - 1000 200 20 x 1.5 39023 -BSI 12 - 14 12 - 14 1/4 M 8/10 - 1000 200 20 x 1.5 39000 -BSI 15 - 19 15 - 19 3/8 M 8/10 - 1000 250 20 x 1.5 39001 -BSI 20 - 25 20 - 25 1/2 M 8/10 - 1000 300 20 x 1.5 39002 -BSI 26 - 30 26 - 30 3/4 M 8/10 - 1000 350 20 x 1.5 39003 -BSI 32 - 36 32 - 36 1 M 8/10 - 1000 400 20 x 1.5 39004 -BSI 38 - 43 38 - 43 11/4 M 8/10 - 1000 400 20 x 1.5 39005 -BSI 44 - 49 44 - 49 11/2 M 8/10 - 1000 450 20 x 1.5 39006 -BSI 50 - 55 50 - 55 - M 8/10 - 1000 450 20 x 1.5 39007 -BSI 56 - 61 56 - 61 2 M 8/10 - 1000 500 20 x 1.5 39008 -BSI 62 - 67 62 - 67 - M 8/10 - 1300 500 20 x 2.0 39009 -BSI 68 - 73 68 - 73 - M 8/10 - 1300 500 20 x 2.0 39010 -BSI 75 - 80 75 - 80 21/2 M 8/10 - 1300 550 20 x 2.0 39011 -BSI 82 - 86 82 - 86 - M 8/10 - 1300 550 20 x 2.0 39012 -BSI 87 - 92 87 - 92 3 M 8/10 - 1300 600 20 x 2.0 39013 -BSI 95 - 102 95 - 102 - M 8/10 M 10/12 2150 600 20 x 2.0 39014 39035BSI 108 - 116 108 - 116 4 M 8/10 - 2150 700 20 x 2.0 39015 -BSI 121 - 127 121 - 127 - M 8/10 M 10/12 2150 700 20 x 2.0 39016 39037BSI 131 - 141 131 - 141 5 M 8/10 M 10/12 2150 800 20 x 2.0 39017 39038BSI 159 - 163 159 - 163 - M 8/10 M 10/12 2150 1000 20 x 2.0 39018 39039BSI 165 - 169 165 - 169 6 M 8/10 - 2150 1150 20 x 2.0 39019 -BSI 192 - 202 192 - 202 - M 8/10 - 3000 1200 20 x 3.0 39020 -BSI 210 - 220 210 - 220 8 M 8/10 - 3000 1250 20 x 3.0 39022 -
* To achieve good sound suppression do not overload the fi tting.
BSI
BSH
BSH 12 - 14 12 - 14 1/4 M 8/10 1000 200 20 x 1.5 38360BSH 15 - 18 15 - 18 3/8 M 8/10 1000 250 20 x 1.5 38361BSH 19 - 22 19 - 22 1/2 M 8/10 1000 300 20 x 1.5 38362BSH 23 - 26 23 - 26 - M 8/10 1000 350 20 x 1.5 38363BSH 27 - 30 27 - 30 3/8 M 8/10 1000 400 20 x 1.5 38364BSH 32 - 35 32 - 35 - M 8/10 1000 400 20 x 1.5 38365BSH 36 - 39 36 - 39 - M 8/10 1000 450 20 x 1.5 38366BSH 40 - 44 40 - 44 11/4 M 8/10 1000 450 20 x 1.5 38367BSH 48 - 52 48 - 52 11/2 M 8/10 1000 500 20 x 1.5 38368BSH 53 - 58 53 - 58 - M 8/10 1000 500 20 x 1.5 38369BSH 60 - 65 60 - 65 2 M 8/10 1000 500 20 x 1.5 38370BSH 68 - 74 68 - 74 - M 8/10 1000 500 20 x 1.5 38371BSH 75 - 80 75 - 80 21/2 M 8/10 1000 500 20 x 1.5 38372BSH 81 - 86 81 - 86 - M 8/10 1000 500 20 x 1.5 38373BSH 87 - 92 87 - 92 3 M 8/10 1000 500 20 x 1.5 38374BSH 100 - 106 100 - 106 - M 8/10 1000 500 20 x 1.5 38375BSH 108 - 116 108 - 116 4 M 8/10 1000 500 20 x 1.5 38376BSH 121 - 127 121 - 127 - M 8/10 1000 500 20 x 1.5 38377
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
ilin
g,
Wa
ll a
nd
Flo
or
Cli
ps
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.16
������
C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s
RWA-G, RWB-G and RWC-G clips
◆ Clips fitted with noise-reducing EPDM rubber insert for temperatures
from – 40 °C to + 120 °C.
◆ Suitable for all types of pipe.
◆ RWA-G clips complete with screws and nuts.
◆ RWB-G and RWC-G clips fitted with six-sided bolts with saw slot.
◆ RWC-G clips with M 10 connection. Particularly suitable for threaded
rod / wire tack M 10 for fitting to wall, ceiling and rail.
◆ RWA-G, RWB-G and RWC-G clips are electrolytically-galvanized.
Types and dimensions RWA-G cl ipsType Ext. dia.
of pipeThreaded tube
dia.Threaded
connectionMax.
working loadStrip
dimensionsCode
numberin mm in inches in N in mm
Types and dimensions RWC-G cl ipsType Ext. dia.
of pipeThreaded tube
dia.Threaded
connectionMax.
working loadStrip
dimensionsCode
numberin mm in inches in N in mm
Types and dimensions RWB-G cl ipsType Ext. dia.
of pipeThreaded tube
dia.Threaded
connectionMax.
working loadStrip
dimensionsCode
numberin mm in inches in N in mm
RWA-G 3/8 17.2 3/8 G 3/8 2500 22 x 3 52601RWA-G 1/2 21.3 1/2 G 3/8 2500 22 x 3 52602RWA-G 3/4 26.9 3/4 G 3/8 2500 22 x 3 52603RWA-G 1 33.7 1 G 3/8 2500 22 x 3 52604RWA-G 11/4 42.4 11/4 G 1/2 2500 30 x 3 52605RWA-G 11/2 48.3 11/2 G 1/2 2500 30 x 3 52606RWA-G 2 60.3 2 G 1/2 3000 30 x 3 52607RWA-G 21/2 76.1 21/2 G 1/2 3000 30 x 3 52608RWA-G 3 88.9 3 G 3/4 3000 30 x 3 52609RWA-G 4 114.3 4 G 3/4 3000 40 x 3 52610
RWC-G 3/8 17.2 3/8 M 10 2500 22 x 3 52641RWC-G 1/2 21.3 1/2 M 10 2500 22 x 3 52642RWC-G 3/4 26.9 3/4 M 10 2500 22 x 3 52643RWC-G 1 33.7 1 M 10 2500 22 x 3 52644RWC-G 11/4 42.4 11/4 M 10 2500 30 x 3 52645RWC-G 11/2 48.3 11/2 M 10 2500 30 x 3 52646RWC-G 2 60.3 2 M 10 3000 30 x 3 52647RWC-G 21/2 76.1 21/2 M 10 3000 30 x 3 52648RWC-G 3 88.9 3 M 10 3000 30 x 3 52649RWC-G 4 114.3 4 M 10 3000 40 x 3 52650
RWB-G 3/8 17.2 3/8 G 3/8 2500 22 x 3 52621RWB-G 1/2 21.3 1/2 G 3/8 2500 22 x 3 52622RWB-G 3/4 26.9 3/4 G 3/8 2500 22 x 3 52623RWB-G 1 33.7 1 G 3/8 2500 22 x 3 52624RWB-G 11/4 42.4 11/4 G 1/2 2500 30 x 3 52625RWB-G 11/2 48.3 11/2 G 1/2 2500 30 x 3 52626RWB-G 2 60.3 2 G 1/2 3000 30 x 3 52627RWB-G 21/2 76.1 21/2 G 1/2 3000 30 x 3 52628RWB-G 3 88.9 3 G 1/2 3000 30 x 3 52629RWB-G 4 114.3 4 G 1/2 3000 40 x 3 52630
RWA-G
RWB-G
RWC-G
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
iling
, Wa
ll an
d F
loo
r Clip
s
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.17P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.17P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.17P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.17P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.17
������ RWA, RWB and RWC clips
◆ RWA clips complete with screws and nuts.
◆ RWB and RWC clips fitted with six-sided bolts with saw slot.
◆ RWC clips with M 10 connection. Particularly suitable for threaded rod / wire tack
M 10 for fitting to wall, ceiling and rail.
◆ Suitable for steel pipe.
◆ RWA, RWB and RWC clips are electrolytically-galvanized.
Types and dimensions RWA cl ipsType Ext. dia.
of pipeThreaded tube dia.
Threaded connection
Max.working load
Strip dimensions
Codenumber
in mm in inches in N in mm
Types and dimensions RWB cl ipsType Ext. dia.
of pipeThreaded tube dia.
Threaded connection
Max.working load
Strip dimensions
Codenumber
in mm in inches in N in mm
Types and dimensions RWC cl ipsType Ext. dia.
of pipeThreaded tube dia.
Threaded connection
Max.working load
Strip dimensions
Codenumber
in mm in inches in N in mm
RWA
RWB
RWC
RWA 3/8 17.2 3/8 G 3/8 2500 22 x 3 52101RWA 1/2 21.3 1/2 G 3/8 2500 22 x 3 52102RWA 3/4 26.9 3/4 G 3/8 2500 22 x 3 52103RWA 1 33.7 1 G 3/8 2500 22 x 3 52104RWA 11/4 42.4 11/4 G 3/8 2500 22 x 3 52105RWA 11/2 48.3 11/2 G 3/8 2500 22 x 3 52100RWA 11/2 48.3 11/2 G 1/2 3000 22 x 3 on demandRWA 2 60.3 2 G 1/2 3000 30 x 3 52107RWA 21/2 76.1 21/2 G 1/2 3000 30 x 3 52108RWA 3 88.9 3 G 3/4 3000 30 x 3 52109
RWB 3/8 17,2 3/8 G 3/8 2500 22 x 3 52121RWB 1/2 21,3 1/2 G 3/8 2500 22 x 3 52122RWB 3/4 26,9 3/4 G 3/8 2500 22 x 3 52123RWB 1 33,7 1 G 3/8 2500 22 x 3 52124RWB 11/4 42,4 11/4 G 3/8 2500 22 x 3 52125RWB 11/2 48,3 11/2 G 3/8 2500 22 x 3 52126RWB 2 60,3 2 G 1/2 3000 30 x 3 52127RWB 21/2 76,1 21/2 G 1/2 3000 30 x 3 52128RWB 3 88,9 3 G 3/4 3000 30 x 3 52129RWB 4 114,3 4 G 3/4 3000 30 x 3 52130
RWC 3/8 17,2 3/8 M 10 2500 22 x 3 52141RWC 1/2 21,3 1/2 M 10 2500 22 x 3 52142RWC 3/4 26,9 3/4 M 10 2500 22 x 3 52143RWC 1 33,7 1 M 10 2500 22 x 3 52144RWC 11/4 42,4 11/4 M 10 2500 22 x 3 52145RWC 11/2 48,3 11/2 M 10 2500 22 x 3 52146RWC 2 60,3 2 M 10 3000 30 x 3 52147RWC 21/2 76,1 21/2 M 10 3000 30 x 3 52148RWC 3 88,9 3 M 10 3000 30 x 3 52149RWC 4 114,3 4 M 10 3000 30 x 3 52150
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
ilin
g,
Wa
ll a
nd
Flo
or
Cli
ps
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.18
������
C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s
BSU and BSF clips for (thin-walled) steel pipes and plastic pipes
◆ BSU and BSF clips for horizontal mounting to the wall or vertical mounting to
the ceiling.
◆ BSU and BSF clips are electrolytically zinc-plated.
◆ BSU and BSF clips are suitable for high loads and high temperatures.
◆ BSU and BSF clips are ideal for confined locations.
◆ BSF clips in connection sizes M 10, M 12, M 16 and 1⁄2 versions, fitted with
anti-loss ring.
Types and dimensions F lamco BSF cl ipsType Ext. dia.
of pipefrom - to
Threadedtubedia.
Threadedconnection
Max.working
load
Stripdimen-sions
Codenumber
in mm in inches M 8 M 10 M 12 M 16 1/2 1/2 / M 10 in N (v=3) in mm M 8 M 10 M 12 M 16 1/2 1/2 / M 10
Types and dimensions BSU cl ipsType Ext. dia.
of pipefrom - to
Threadedtubedia.
Threadedconnection
Max.working load
Stripdimensions
Codenumber
in mm in inches in N (v=3) in mm
BSF 13 - 17.5 13.5 - 17.5 3/8 M 8 M 10 - - 1/2 1/2 / M 10 1650 20 x 2.5 38701 38711 - - 38761 51801BSF 21 - 25.5 21 - 25.5 1/2 M 8 M 10 - - 1/2 1/2 / M 10 1650 20 x 2.5 38702 38712 - - 38762 51802BSF 26.5 - 30.5 26.5 - 30.5 3/4 M 8 M 10 - - 1/2 1/2 / M 10 1650 20 x 2.5 38703 38713 - - 38763 51803BSF 33.5 - 38.5 33.5 - 38.5 1 M 8 M 10 - - 1/2 1/2 / M 10 1650 20 x 2.5 38704 38714 - - 38764 51804BSF 41.5 - 47.5 41.5 - 47.5 11/4 M 8 M 10 - - 1/2 1/2 / M 10 1650 20 x 2.5 38705 38715 - - 38765 51805BSF 48 - 54.5 48 - 54.5 11/2 M 8 M 10 - - 1/2 1/2 / M 10 1650 20 x 2.5 38706 38716 - - 38766 51806BSF 56 - 62.5 56 - 62.5 2 M 8 M 10 - - 1/2 1/2 / M 10 1650 20 x 2.5 38707 38717 - - 38767 51807BSF 62.5 - 69.5 62.5 - 69.5 - M 8 M 10 - - 1/2 1/2 / M 10 1650 20 x 2.5 38788 38718 - - 38768 51808BSF 69.5 - 76.5 69.5 - 76.5 21/2 M 8 M 10 - - 1/2 1/2 / M 10 1650 20 x 2.5 38789 38719 - - 38769 51809BSF 77.5 - 84.5 77.5 - 84.5 - M 8 M 10 - - 1/2 1/2 / M 10 1650 20 x 2.5 38790 38720 - - 38770 51810BSF 85 - 92.5 85 - 92.5 3 M 8 M 10 - - 1/2 1/2 / M 10 1650 20 x 2.5 38791 38721 - - 38771 51811BSF 93 - 100.5 93 - 100.5 - M 8 M 10 M 12 - 1/2 1/2 / M 10 3000 25 x 2.5 38792 38722 38742 - 38772 51812BSF 101.5 - 110.5 101.5 - 110.5 - M 8 M 10 M 12 - 1/2 1/2 / M 10 3000 25 x 2.5 38793 38723 38743 - 38773 51813BSF 110 - 117.5 110 - 117.5 4 M 8 M 10 M 12 - 1/2 1/2 / M 10 3000 25 x 2.5 38794 38724 38744 - 38774 51814BSF 119.5 - 127.5 119.5 - 127.5 - M 8 M 10 M 12 - 1/2 1/2 / M 10 3000 25 x 2.5 38795 38725 38745 - 38775 51815BSF 127.5 - 133.5 127.5 - 133.5 - M 8 M 10 M 12 - 1/2 1/2 / M 10 3000 25 x 2.5 38796 38726 38746 - 38776 51816BSF 134.5 - 142.5 134.5 - 142.5 5 M 8 M 10 M 12 - 1/2 1/2 / M 10 4000 30 x 3.0 38797 38727 38747 - 38777 51817BSF 143.5 - 150.5 143.5 - 150.5 - M 8 M 10 M 12 - 1/2 1/2 / M 10 4000 30 x 3.0 38798 38728 38748 - 38778 51818BSF 151.5 - 159.5 151.5 - 159.5 - M 8 M 10 M 12 - 1/2 1/2 / M 10 4000 30 x 3.0 38799 38729 38749 - 38779 51819BSF 163.5 - 171.5 163.5 - 171.5 6 M 8 M 10 M 12 - 1/2 1/2 / M 10 4000 30 x 3.0 38800 38730 38750 - 38780 51820BSF 172.5 - 182.5 172.5 - 182.5 - M 8 M 10 M 12 - 1/2 1/2 / M 10 4000 30 x 3.0 38801 38731 38751 - 38781 51821BSF 192.5 - 198.5 192.5 - 198.5 - M 8 M 10 M 12 - 1/2 1/2 / M 10 4000 30 x 3.0 38802 38732 38752 - 38782 51822BSF 215 - 220.5 215 - 220.5 8 M 8 M 10 M 12 - 1/2 1/2 / M 10 4000 30 x 3.0 38803 38733 38753 - 38783 51823BSF 267 - 273 267 - 273 10 - - - M 16 - - 10000 50 x 5.0 - - - 38754 - -BSF 315 - 324 315 - 324 12 - - - M 16 - - 10000 50 x 5.0 - - - 38755 - -BSF 350 - 356 350 - 356 14 - - - M 16 - - 10000 50 x 5.0 - - - 38756 - -BSF 400 - 406 400 - 406 16 - - - M 16 - - 10000 50 x 5.0 - - - 38757 - -
BSF
BSUBSU 20 - 25 20 - 25 1/2 M 8/10 500 20 x 1.5 38271BSU 26 - 30 26 - 30 3/4 M 8/10 600 20 x 1.5 38272BSU 32 - 36 32 - 36 1 M 8/10 800 20 x 1.5 38273BSU 38 - 43 40 - 43 11/4 M 8/10 1000 20 x 1.5 38274BSU 44 - 49 44 - 49 11/2 M 8/10 1200 20 x 1.5 38275BSU 56 - 61 56 - 61 2 M 8/10 1300 20 x 1.5 38276BSU 75 - 80 75 - 80 21/2 M 8/10 1500 20 x 2.0 38277BSU 87 - 92 87 - 92 3 M 8/10 1500 20 x 2.0 38278BSU 108 - 116 108 - 116 4 M 10/12 2000 20 x 2.5 38282BSU 131 - 141 131 - 141 5 M 10/12 2000 20 x 2.5 38283BSU 165 - 169 165 - 169 6 M 10/12 2000 20 x 2.5 38284
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
iling
, Wa
ll an
d F
loo
r Clip
s
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.19P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.19P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.19P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.19P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.19
������ BSF-D clips for (thin-walled) steel pipes and plastic pipes
◆ BSF-D clips for fitting to the ceiling.
◆ The BSF-D has an additional lower nut to permit further clips to be installed beneath,
(subject to overall design loads).
◆ BSF-D clips are electrolytically zinc-plated.
◆ BSF-D clips are suitable for high loads and high temperatures.
◆ BSF-D clips are ideal for confined locations.
Types and dimensions F lamco BSF-D cl ipsType Ext. dia. of pipe Threaded
tube dia.Threaded
connectionMax. working
loadStrip
dimensionsCode
numberfrom - to in mm in inches D in N (v=3) in mm
BSF-D 13.0 - 17.5 13.5 - 17.5 3/8 M 8 1650 20 x 2.5 38500BSF-D 21.0 - 25.5 21.0 - 25.5 1/2 M 8 1650 20 x 2.5 38501BSF-D 26.5 - 30.5 26.5 - 30.5 3/4 M 8 1650 20 x 2.5 38502BSF-D 33.5 - 38.5 33.5 - 38.5 1 M 8 1650 20 x 2.5 38503BSF-D 41.5 - 47.5 41.5 - 47.5 11/4 M 8 1650 20 x 2.5 38504BSF-D 48.0 - 54.5 48.0 - 54.5 11/2 M 8 1650 20 x 2.5 38505BSF-D 56.0 - 62.5 56.0 - 62.5 2 M 8 1650 20 x 2.5 38506BSF-D 62.5 - 69.5 62.5 - 69.5 - M 8 1650 20 x 2.5 38507BSF-D 69.5 - 76.5 69.5 - 76.5 21/2 M 8 1650 20 x 2.5 38508BSF-D 77.5 - 84.5 77.5 - 84.5 - M 8 1650 20 x 2.5 38509BSF-D 85.0 - 92.5 85.0 - 92.5 3 M 8 1650 20 x 2.5 38510BSF-D 93.0 - 100.5 93.0 - 100.5 - M 8 3000 25 x 2.5 38511BSF-D 101.5 - 110.5 101.5 - 110.5 - M 8 3000 25 x 2.5 38512BSF-D 110.0 - 117.5 110.0 - 117.5 4 M 8 3000 25 x 2.5 38513BSF-D 119.5 - 127.5 119.5 - 127.5 - M 8 3000 25 x 2.5 38514BSF-D 127.5 - 133.5 127.5 - 133.5 - M 8 3000 25 x 2.5 38515BSF-D 134.5 - 142.5 134.5 - 142.5 5 M 8 4000 30 x 3.0 38516BSF-D 143.5 -1 50.5 143.5 - 150.5 - M 8 4000 30 x 3.0 38517BSF-D 151.5 - 159.5 151.5 - 159.5 - M 8 4000 30 x 3.0 38518BSF-D 163.5 - 171.5 163.5 - 171.5 6 M 8 4000 30 x 3.0 38519BSF-D 172.5 - 182.5 172.5 - 182.5 - M 8 4000 30 x 3.0 38520BSF-D 192.5 - 198.5 192.5 - 198.5 - M 8 4000 30 x 3.0 38521BSF-D 215.0 - 220.5 215.0 - 220.5 8 M 8 4000 30 x 3.0 38522
* The load applies for all the BSF-D Clips fi tted under each other.
BSF-D
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
ilin
g,
Wa
ll a
nd
Flo
or
Cli
ps
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.20
������
C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s
Selection table for BSF and BSF-D clips
◆ Using the table below, you can easily find the right type of BSF or BSF-D clip for
the type and dimension of pipes you require.
Select ion table for BSF and BSF-D cl ipsType Threaded tube
DIN 2440/24412460/2461
Sprinkler pipeDIN 2448/2458
DIN 19522
ML pipeSML pipe
LORO X PVC pipe
nom.dia.
in inchesext. dia.in mm
nom.dia.
in mmext. dia.in mm
nom.dia.
in mmext. dia.in mm
nom.dia.
in mmext. dia.in mm
ext. dia.in mm
13.5 - 17.5 - 13.5 - 13.5 - - - - 16 3/8 17.2 - 16.5 - - - - - - - 10 17.2 - - - - - 21.5 - 25.5 1/2 21.3 15 21.3 - - - - 25 - - 20 25.0 - - - - - 26.5 - 30.5 3/4 26.9 20 26.9 - - - - - - - 25 30.0 - - - - 33.5 - 38.5 1 33.7 25 33.7 - - - - - - - 32 38.0 - - - - - 41.5 - 47 11/4 42.4 32 42.4 - - - 40.0 - - - 40 44.5 - - - - - 48.5 - 54 11/2 48.3 40 48.3 - - 50 53.0 50 - - - 51.5 - - - - - 56.5 - 62.5 2 60.3 50 57.4 50 58 - - - - - 50 60.3 - - - - - 62.5 - 69.5 - - - 63.5 - - - - 63 69.5 - 76.5 21/2 76.1 - 70.5 - - 70 73.5 75 - - 65 76.1 - - - - - 77.5 - 84 - - 82.5 - 70 78 - - 85.1 - 92.5 3 88.9 80 88.9 - - 80 89.5 90 93.5 - 100.5 - - - 95.5 - - 100 102.5 -101.5 - 110.5 - - - 101.6 - - - - 110 - - 100 108.1 - - - - -110.5 - 117.5 4 114.3 100 114.3 100 110 - - -119.5 - 127.5 - - - 121.2 - - - - 125 - - - 127.1 - - - - -127.5 - 133.5 - - 125 133.5 - - 125 133.5 -134.5 - 142.5 5 139.7 125 139.7 125 135 - - -143.5 - 150.5 - - - - - - - - -151.5 - 159.5 - - 150 159.5 - - 150 159.5 -163.5 - 171.5 6 165.1 150 165.1 - - - - - - - - 168.3 - - - - -172.5 - 182 - - - - - - - - -192.5 - 198 - - 175 193.7 - - - - -215.5 - 220 8 - 200 219.1 - - 200 219.1 -
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
iling
, Wa
ll an
d F
loo
r Clip
s
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.21P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.21P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.21P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.21P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.21
������ Selection table for BSF and BSF-D clips
◆ Using the table below, you can easily find the right type of BSF or BSF-D clip for
the type and dimension of pipes you require.
Select ion table for BSF and BSF-D cl ipsType PE pipe
GeberitWicu Specialcopper pipe
Wicu Extracopper pipe
Thin-walledsteel pipeDIN 2391
Vul-cathene
ext. dia.in mm
wallthickness
in mmext. dia.in mm
wallthickness
in mmext. dia.in mm
ext. dia.in mm
ext. dia.in mm
13.5- 17.5 - 10 x 1.5 14 - - 16 16 - 12 x 1.5 16 - - - - 21.5 - 25.5 25 18 x 1.5 23 - - 22 25 - - - - - 25 - 26.5 - 30.5 - 22 x 1.5 27 12 x 1.5 26 28 - - - - 15 x 1.5 29 30 - 33.5 - 38.5 - - - 15 x 1.5 37 35 - - - - - 38 - 41.5 - 47 - - - 22 x 1.5 46 45 - 48.5 - 54 50 42 x 1.5 48 - - 48 50 - - - - - 50 - 56.5 - 62.5 56 54 x 2.5 60 - - 60 - 62.5 - 69.5 63 - - 28 x 1.5 64 63 63 69.5 - 76.5 75 - - 35 x 1.5 72 70 75 77.5 - 84 - - - - - 80 - 85.1 - 92.5 90 - - 42 x 1.5 91 90 90 93.5 - 100.5 - - - - - 100 -101.5 - 110.5 110 - - - - 110 110110.5 - 117.5 - - - 54 x 2.5 116 - -119.5 - 127.5 125 - - - - 120 125127.5 - 133.5 - - - - - - -134.5 - 142.5 140 - - - - - -143.5 - 150.5 - - - - - - -151.5 - 159.5 - - - - - - -163.5 - 171.5 - - - - - - -172.5 - 182 - - - - - - -192.5 - 198 - - - - - - -215.5 - 220 - - - - - - -
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
ilin
g,
Wa
ll a
nd
Flo
or
Cli
ps
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.22
������
C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s
◆ BSP clips for fixed point constructions, for example in combination with VH corner
connections (see page 6.5 and 6.10) or VG angular plate (see page 8.3 and 8.9) and
for very high loads.
◆ BSP clips are electrolytically zinc-plated and offer extra long lugs for mounting.
◆ BSP clips are supplied as complete clip. i.e. with two halves.
BSP fixed point clips
Types and dimensions F lamco BSP cl ipsType Ext. dia.
of pipeThreaded tube
nom. dia. Strip
dimensionsSuitable for Tightening moment
of bolt/nutMax. axial
load on clipCode
numberin mm in inches in N dia. bolt backnut in Nm in N
BSP 33.7 33.7 1 40 x 4.0 11 M 10 50 1000 38080BSP 42.4 42.4 11⁄4 40 x 4.0 11 M 10 50 1000 38081BSP 48.3 48.3 11⁄2 40 x 4.0 11 M 10 50 1000 38082BSP 60.3 60.3 2 40 x 4.0 11 M 10 50 1000 38083BSP 76.1 76.1 21⁄2 40 x 4.0 11 M 10 50 5000 38084BSP 88.9 88.9 3 40 x 4.0 11 M 10 50 5000 38085BSP 108 108 - 40 x 4.0 11 M 10 50 5000 38086BSP 114.4 114.4 4 40 x 4.0 11 M 10 50 5000 38087BSP 133 133 - 40 x 4.0 11 M 10 50 5000 38088BSP 139.7 139.7 5 40 x 4.0 11 M 10 50 5000 38089BSP 159 159 - 40 x 4.0 11 M 10 50 5000 38090BSP 168.3 168.3 6 40 x 4.0 11 M 10 50 5000 38091BSP 216 216 - 50 x 6.0 13 M 12 90 10000 38092BSP 219.1 219.1 8 50 x 6.0 13 M 12 90 10000 38093BSP 267 267 - 50 x 6.0 13 M 12 90 10000 38094BSP 273 273 10 50 x 6.0 13 M 12 90 10000 38095BSP 318 318 - 50 x 6.0 13 M 12 90 10000 38096BSP 323.9 323.9 12 50 x 6.0 13 M 12 90 10000 38097
BSP
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
iling
, Wa
ll an
d F
loo
r Clip
s
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.23P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.23P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.23P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.23P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.23
������◆ KB clips for fixed point constructions and very high loads.
◆ Heavy-duty type according to DIN 3567.
◆ KB clips are delivered per half – i.e. for one half of the clip.
KB clips
Types and dimensions F lamco KB cl ipsType Ext. dia.
of pipeThreaded
tube nom. dia.
Sprinkler pipe
nom. dia.
Dimensions in mm Stripdimensions
Bolts required
Codenumber
in mm in inches in mm A C D F R mm steel zinc-plated
KB 22 22 1/2 15 56 15 11.5 7 7 30 x 5.0 M 10 x 30 37932 37882KB 25 25 - 20 62 15 11.5 7 7 30 x 5.0 M 10 x 30 37900 -KB 27 27 3/4 20 66 15 11.5 7 7 30 x 5.0 M 10 x 30 37901 37851KB 30 30 - 25 68 15 11.5 7 7 30 x 5.0 M 10 x 30 37902 -KB 34 34 1 25 72 15 11.5 7 7 30 x 5.0 M 10 x 30 37903 37853KB 38 38 - 32 76 15 11.5 7 7 30 x 5.0 M 10 x 30 37904 -KB 43 43 11/4 32 82 15 11.5 7 7 30 x 5.0 M 10 x 30 37905 37855KB 45 45 - 40 84 15 11.5 7 7 30 x 5.0 M 10 x 30 37906 -KB 49 49 11/2 40 88 15 11.5 7 7 30 x 5.0 M 10 x 30 37907 37857KB 57 57 - 50 104 18 14 9 9 40 x 6.0 M 12 x 35 37908 -KB 61 61 2 50 108 18 14 9 9 40 x 6.0 M 12 x 35 37909 37859KB 77 77 21/2 65 122 18 14 9 9 40 x 6.0 M 12 x 35 37910 37860KB 89 89 3 80 136 18 14 9 9 40 x 6.0 M 12 x 35 37911 37861KB 108 108 - 100 172 24 18 11 12 50 x 8.0 M 16 x 45 37912 37862KB 115 115 4 100 178 24 18 11 12 50 x 8.0 M 16 x 45 37913 37863KB 133 133 - 125 196 24 18 11 12 50 x 8.0 M 16 x 45 37914 37864KB 140 140 5 125 204 24 18 11 12 50 x 8.0 M 16 x 45 37915 37865KB 159 159 - 150 222 24 18 11 12 50 x 8.0 M 16 x 45 37916 37866KB 169 169 6 150 232 24 18 11 12 50 x 8.0 M 16 x 45 37917 37867KB 194 194 - 175 258 24 18 11 12 50 x 8.0 M 16 x 45 37919 -KB 220 220 8 200 284 24 18 11 12 50 x 8.0 M 16 x 45 37921 37871KB 267 267 - 250 342 30 23 14 12 60 x 8.0 M 20 x 50 37922 -KB 273 273 10 250 348 30 23 14 12 60 x 8.0 M 20 x 50 37923 -KB 324 324 12 300 398 30 23 14 12 60 x 8.0 M 20 x 50 37925 37875KB 356 356 14 350 432 30 23 14 12 60 x 8.0 M 20 x 50 37926 37876KB 368 368 - 350 444 30 23 14 12 60 x 8.0 M 20 x 50 37927 -KB 407 407 16 400 498 36 27 18 15 70 x 10.0 M 24 x 60 37928 -KB 419 419 - 400 510 36 27 18 15 70 x 10.0 M 24 x 60 37929 -KB 457 457 - 450 550 36 27 18 15 70 x 10.0 M 24 x 60 37933 -KB 508 508 - 500 600 36 27 18 15 70 x 10.0 M 24 x 60 37930 -KB 521 521 - 500 614 36 27 18 15 70 x 10.0 M 24 x 60 37931 -
� ��
�
�
� �
KB
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
ilin
g,
Wa
ll a
nd
Flo
or
Cli
ps
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.24
������
C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s
◆ Variofit clips are suitable for copper or thin-walled steel pipes or use in the Flamco rail
R1, R 2, R 3 and R 4.
◆ Variofit clips manufactured from nylon plastic with brass fixing nut.
◆ Variofit clips can be secured using M 6 rod or wood screws with a maximum head of
7 mm.
◆ PC plug clips for use with floor heating and plastic pipes for mounting on the floor.
Manufactured from nylon plastic. Drilled hole 6 mm, drilled depth 30 mm.
◆ KS clips with brass nut with M 6 connection.
◆ KS clips are resistant to temperatures from – 30 °C to + 120 °C.
◆ KS clips in single (KS), double (KSD) and chrome (KSC and KSDC).
Variofit plastic clips, PC plug clips, and KS clips
Types and dimensions F lamco Var iof i t cl ipsType Ext. dia. Threaded Minimum pull-out force Centre distance Code
of pipein mm
connection openN
closedN
to the wallin mm
number
Types and dimensions F lamco PC plug cl ipsType Ext. dia.
of pipeDistance between centres Code
numberin mm in mm
Types and dimensions F lamco KS cl ipsType Ext. dia.
of pipeExt. dia. of pipe
Threaded connection
Dimensions in mm CodenumberA H
in mm in mm in mm in mm
Variofi t 12 12 M 6 100 500 20 15112Variofi t 15 15 M 6 100 500 20 15115Variofi t 22 22 M 6 100 700 25 15122Variofi t 28 28 M 6 100 700 25 15128
PC 16 - 19 single 16 - 19 - 15216PC 20 - 24 single 20 - 24 - 15220PC 25 - 30 single 25 - 30 - 15225PC 20 - 24 double 20 - 24 27 15320PC 25 - 30 double 25 - 30 45 15325
KS 8 8 - M 6 - 12 62108KS 10 10 6 M 6 - 16 62110KS 12 12 8 M 6 - 17 62112KS 15 15 10 M 6 - 18 62115KS 18 18 12 M 6 - 23 62118KS 22 22 15 M 6 - 26 62122KS 24 24 28 M 6 - 31 62124KS 28 28 22 M 6 - 33 62128KS 35 35 22 M 6 - 38 62135KS 42 42 28 M 6 - 42 62142
KSC 10 2 x 10 6 M 6 - 16 62160KSC 12 2 x 12 8 M 6 - 17 62162KSC 15 2 x 15 10 M 6 - 18 62162 KSD 8 8 - M 6 23 15 62028KSD 10 10 2 x 6 M 6 29 16 62210KSD 12 12 2 x 8 M 6 33 17 62212KSD 15 15 2 x 10 M 6 35 18 62215KSD 18 18 2 x 12 M 6 38 23 62218KSD 22 22 2 x 15 M 6 43 26 62222KSD 28 28 2 x 22 M 6 53 33 62228
KSDC 10 2 x 10 2 x 6 M 6 29 16 62260KSDC 12 2 x 12 2 x 8 M 6 33 17 62262KSDC 15 2 x 15 2 x 10 M 6 35 18 62265
�
�
�
VARIOFIT
PC
KS
KSD
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
iling
, Wa
ll an
d F
loo
r Clip
s
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.25P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.25P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.25P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.25P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.25
������◆ UB: heavy-duty clip for mounting steel pipes directly to Flamco rail or other
surfaces.
◆ Threaded connection from M 6 to M 16.
◆ Supplied complete with 4 nuts.
◆ Omega: basic version, particularly suitable for flush fitting to walls.
◆ Fast and easy fitting.
◆ UB and Omega clip electrolytically-galvanized.
UB and Omega clips
Types and dimensions UB cl ipsType Ext. dia.
of pipefrom - to
Threa-dedtube
Threadedconnection
Dimensions in mm Suitable forFlamco rail
Codenumber
Athreaded end
Bin mm in inches
Types and dimensions Omega cl ipsType Ext. dia.
of pipeThreaded tube Strip
dimensionsCode
numberin mm mm
� �
UB
OMEGA
UB 6 x 10 - 14 10 - 14 1⁄4 M 6 35 30 R 1 / R 2 / R 8 81001UB 6 x 15 - 18 15 - 18 3⁄8 M 6 36.5 30 R 1 / R 2 / R 8 81002UB 6 x 19 - 22 19 - 22 1⁄2 M 6 38.5 30 R 1 / R 2 / R 8 81003UB 8 x 23 - 27 23 - 27 3⁄4 M 8 45 30 R 0 / R 1 / R 2 / R 8 81004UB 8 x 28 - 34 28 - 34 1 M 8 49 40 R 0 / R 1 / R 2 / R 8 81005UB 8 x 35 - 43 35 - 43 11⁄4 M 8 53 40 R 0 / R 1 / R 2 / R 8 81006UB 8 x 44 - 49 44 - 49 11⁄2 M 8 56 40 R 0 / R 1 / R 2 / R 8 81007UB 8 x 50 - 61 50 - 61 2 M 8 62 45 R 1 / R 2 / R 8 81008UB 8 x 62 - 70 62 - 70 - M 8 67 45 R 1 / R 2 / R 8 81009UB 8 x 71 - 77 71 - 77 21⁄2 M 8 70 45 R 0 / R 1 / R 2 / R 8 81010UB 10 x 78 - 89 78 - 89 3 M 10 82 45 R 1 / R 2 / R 8 81011UB 10 x 90 - 102 90 - 102 31⁄2 M 10 88 50 R 1 / R 2 / R 8 81012UB 10 x 103 - 108 103 - 108 - M 10 91 50 R 1 / R 2 / R 8 81013UB 10 x 109 - 115 109 - 115 4 M 10 94 50 R 1 / R 2 / R 8 81014UB 12 x 116 - 127 116 - 127 - M 12 124 70 R 4 / R 7 / R 8 81015UB 12 x 128 - 133 128 - 133 - M 12 127 80 R 4 / R 7 / R 8 81016UB 12 x 134 - 140 134 - 140 5 M 12 130 80 R 4 / R 7 / R 8 81017UB 12 x 141 - 159 141 - 159 - M 12 140 80 81018UB 12 x 160 - 169 160 - 169 6 M 12 150 85 R 4 / R 7 / R 8 81019UB 12 x 170 - 220 170 - 220 8 M 12 175 85 R 4 / R 7 / R 8 81020UB 16 x 221 - 273 221 - 273 10 M 16 180 60 81021UB 16 x 274 - 324 274 - 324 12 M 16 205 70 81022UB 16 x 325 - 356 325 - 356 14 M 16 220 70 81023UB 16 x 357 - 407 357 - 407 16 M 16 250 70 81024
Omega 1/4 13.5 1⁄4 20 x 2 51390 Omega 3/8 17.2 3⁄8 20 x 2 51391 Omega 1/2 21.3 1⁄2 20 x 2 51392 Omega 3/4 26.9 3⁄4 20 x 2 51393 Omega 1 33.7 1 20 x 2 51394 Omega 11/4 42.4 11⁄4 20 x 2 51395 Omega 11/2 48.3 11⁄2 20 x 2 51396 Omega 2 60.3 2 20 x 2 51397
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
ilin
g,
Wa
ll a
nd
Flo
or
Cli
ps
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.26
������
C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s
Flamco BK clips for steel pipes
◆ Sleeve and ball joint electrolytically zinc-plated.
◆ Provision for additional clips to be installed beneath using the BO connector (subject
to overall design loads) whilst maintaining flexibility*.
Types and dimensions F lamco BK cl ipsType Threaded
tube nom. dia.
Sprinkler Pipe
ext. dia.
Thin-w. steel pipeext. dia.
Threaded connection
Max.working
load
Stripdimen-sions
A Cap Codenumber
in inches in mm in mm in N in mm in mmBK 6 x 15* - - 15 M 6 1500 12 x 1.5 40 T 6 32109BK 6 x 18* - - 18 M 6 1500 12 x 1.5 40 T 6 32101BK 6 x 22 - - 22 M 6 1500 12 x 1.5 40 T 6 32102BK 6 x 28 - - 28 M 6 1500 12 x 1.5 40 T 6 32110BK 6 x 35 - - 35 M 6 1500 12 x 1.5 40 T 6 32111BK 6 x 42 - - 42 M 6 1500 12 x 1.5 40 T 6 32105
BK 6 x 3/8 3/8 - - M 6 1500 12 x 1.5 40 T 6 32101BK 6 x 1/2 1/2 - - M 6 1500 12 x 1.5 40 T 6 32102BK 6 x 3/4 3/4 - - M 6 1500 12 x 1.5 40 T 6 32103BK 6 x 1 1 - - M 6 1500 12 x 1.5 40 T 6 32104BK 6 x 11/4 11/4 - - M 6 1500 12 x 1.5 40 T 6 32105BK 6 x 11/2 11/2 - - M 6 1500 12 x 1.5 40 T 6 32106BK 6 x 2 2 - - M 6 1500 12 x 1.5 40 T 6 32107
BK 6 x 25 - 25.9 - M 6 1500 12 x 1.5 40 T 6 32130BK 6 x 30 - 31.8 - M 6 1500 12 x 1.5 40 T 6 32131BK 6 x 38 - 38 - M 6 1500 12 x 1.5 40 T 6 32132BK 6 x 44 - 44.5 - M 6 1500 12 x 1.5 40 T 6 32133BK 6 x 51 - 51 - M 6 1500 12 x 1.5 40 T 6 32134BK 6 x 57 - 57 - M 6 1500 12 x 1.5 40 T 6 32135BK 6 x 62 - 62 - M 6 1500 12 x 1.5 40 T 6 32137BK 6 x 64 - 63.5 - M 6 1500 12 x 1.5 40 T 6 32136
* Except BK 6 x 15 and BK 6 x 18.
�
BK
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
iling
, Wa
ll an
d F
loo
r Clip
s
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.27P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.27P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.27P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.27P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.27
������◆ Sleeve and ball joint electrolytically zinc-plated.
◆ Provision for additional clips to be installed beneath using the BO connector
(subject to overall design loads) whilst maintaining flexibility*.
◆ BK clips with a connection size of M 12 have a lock on the inside of the sleeve.
Flamco BK clips for steel pipes
Types and dimensions F lamco BK cl ipsType Threaded
tube nom. dia.
Sprinkler pipe
ext. dia.
Thin-w. steel pipe
ext. dia
Threadedconnection
Max.working
load
Stripdimen-sions
A Cap Codenumber
in inches in mm in mm in N in mm in mmBK 8 x 15* - - 15 M 8 1500 12 x 1.50 40 T 8S 32209BK 8 x 18* - - 18 M 8 1500 12 x 1.50 40 T 8S 32201BK 8 x 22 - - 22 M 8 1500 12 x 1.50 40 T 8S 32202BK 8 x 28 - - 28 M 8 1500 12 x 1.50 40 T 8S 32210BK 8 x 35 - - 35 M 8 1500 12 x 1.50 40 T 8S 32211BK 8 x 42 - - 42 M 8 1500 12 x 1.50 40 T 8S 32205
BK 8 x 3/8 3/8 - - M 8 1500 12 x 1.50 40 T 8S 32201BK 8 x 1/2 1/2 - - M 8 1500 12 x 1.50 40 T 8S 32202BK 8 x 3/4 3/4 - - M 8 1500 12 x 1.50 40 T 8S 32203BK 8 x 1 1 - - M 8 1500 12 x 1.50 40 T 8S 32204BK 8 x 11/4 11/4 - - M 8 1500 12 x 1.50 40 T 8S 32205BK 8 x 11/2 11/2 - - M 8 1500 12 x 1.50 40 T 8S 32206BK 8 x 2 2 - - M 8 1500 12 x 1.50 40 T 8S 32207
BK 8 x 44 - 44.5 - M 8 1500 12 x 1.50 40 T 8S 32233BK 8 x 51 - 51 - M 8 1500 12 x 1.50 40 T 8S 32234BK 8 x 57 - 57 - M 8 1500 12 x 1.50 40 T 8S 32235BK 8 x 64 - 63.5 - M 8 1500 12 x 1.50 40 T 8S 32236BK 8 x 70 - 70 - M 8 2500 16 x 1.90 54 T 8 32237BK 8 x 76 21/2 76.1 - M 8 2500 16 x 1.90 54 T 8 32238BK 8 x 78 - 78 - M 8 2500 16 x 1.90 54 T 8 32280BK 8 x 83 - 82.5 - M 8 2500 16 x 1.90 54 T 8 32239BK 8 x 89 3 88.9 - M 8 2500 16 x 1.90 54 T 8 32240BK 8 x 90 - 90 - M 8 2500 16 x 1.90 54 T 8 32281BK 8 x 95 - 95 - M 8 2500 16 x 1.90 54 T 8 32241BK 8 x 102 31/2 101.6 - M 8 2500 16 x 1.90 54 T 8 32242
BK 12 x 108 - 108 - M 12 5000 25 x 2.75 60 T 12 32343BK 12 x 114 4 114.3 - M 12 5000 25 x 2.75 60 T 12 32344BK 12 x 121 - 121 - M 12 5000 25 x 2.75 60 T 12 32345BK 12 x 127 - 127 - M 12 5000 25 x 2.75 60 T 12 32346BK 12 x 133 - 133 - M 12 5000 25 x 2.75 60 T 12 32347BK 12 x 140 5 139.7 - M 12 5000 25 x 2.75 60 T 12 32349BK 12 x 146 - 146 - M 12 5000 25 x 2.75 60 T 12 32350BK 12 x 152 - 152.4 - M 12 5000 25 x 2.75 60 T 12 32351BK 12 x 159 - 159 - M 12 5000 25 x 2.75 60 T 12 32352BK 12 x 168 6 168.3 - M 12 5000 25 x 2.75 60 T 12 32353BK 12 x 171 - 171 - M 12 5000 25 x 2.75 60 T 12 32354BK 12 x 178 - 177.8 - M 12 5000 25 x 2.75 60 T 12 32355BK 12 x 193 - 193.7 - M 12 5000 25 x 2.75 60 T 12 32357BK 12 x 216 - 216 - M 12 5000 25 x 2.75 60 T 12 32358BK 12 x 219 8 219.1 - M 12 5000 25 x 2.75 60 T 12 32359BK 12 x 241 - 241 - M 12 5000 25 x 2.75 60 T 12 32360BK 12 x 244 - 244.5 - M 12 5000 25 x 2.75 60 T 12 32363BK 12 x 267 - 267 - M 12 5000 25 x 2.75 60 T 12 32362BK 12 x 273 10 273 - M 12 5000 25 x 2.75 60 T 12 32364BK 12 x 299 - 298.5 - M 12 5000 25 x 2.75 60 T 12 32369BK 12 x 323 12 323.9 - M 12 5000 25 x 2.75 60 T 12 32365BK 12 x 355 14 355.6 - M 12 5000 25 x 2.75 60 T 12 32366BK 12 x 368 - 368 - M 12 5000 25 x 2.75 60 T 12 32367BK 12 x 406 16 406.4 - M 12 5000 25 x 2.75 60 T 12 32368
* Except BK 8 x 15 and BK 8 x 18.
�
BK
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
ilin
g,
Wa
ll a
nd
Flo
or
Cli
ps
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.28
������
C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s
◆ Sleeve and ball joint electrolytically zinc-plated.
◆ Provision for additional clips to be installed beneath using the BO connector (subject
to overall design loads) whilst maintaining flexibility*.
◆ BKI clips with a connection size of M 12 have a lock on the inside of the sleeve.
Flamco BKI clips with noise suppressing rubber lining
Types and dimensions F lamco BKI cl ipsType Threaded
tube
nom. dia
Firetube
ext. dia.
Thin-w.steelpipe
ext. dia.
Copperpipe
ext. dia.
Threadedconnec-
tion
Max.working
load
Max.working
load
20 dB(A)
Stripdimensions
A Codenumber
in inches in mm in mm in mm in N in N** in mm in mmBKI 6 x 12* - - 12 12 M 6 1500 400 12 x 1.50 40 33008BKI 6 x 15* - - 15 15 M 6 1500 400 12 x 1.50 40 33009BKI 6 x 18* - - 18 18 M 6 1500 400 12 x 1.50 40 33001BKI 6 x 22 - - 22 22 M 6 1500 400 12 x 1.50 40 33014BKI 6 x 28 - - 28 28 M 6 1500 400 12 x 1.50 40 33010BKI 6 x 35 - - 35 35 M 6 1500 400 12 x 1.50 40 33011BKI 6 x 42 - - 42 42 M 6 1500 400 12 x 1.50 40 33012BKI 6 x 54 - - 54 54 M 6 1500 400 12 x 1.50 40 33013
BKI 6 x 3/8 3/8 - - - M 6 1500 400 12 x 1.50 40 33001BKI 6 x 1/2 1/2 - - - M 6 1500 400 12 x 1.50 40 33002BKI 6 x 3/4 3/4 - - - M 6 1500 400 12 x 1.50 40 33003BKI 6 x 1 1 - - - M 6 1500 400 12 x 1.50 40 33004BKI 6 x 11/4 11/4 - - - M 6 1500 400 12 x 1.50 40 33005BKI 6 x 11/2 11/2 - - - M 6 1500 400 12 x 1.50 40 33006BKI 6 x 2 2 - - - M 6 1500 400 12 x 1.50 40 33007
BKI 6 x 44 - 44.5 - - M 6 1500 400 12 x 1.50 40 33033BKI 6 x 51 - 51 - - M 6 1500 400 12 x 1.50 40 33034BKI 6 x 57 - 57 - - M 6 1500 400 12 x 1.50 40 33035BKI 6 x 64 - 63.5 - - M 6 1500 400 12 x 1.50 40 33036
BKI 8 x 70 - 70 - - M 8 2500 700 16 x 1.90 54 33137BKI 8 x 76 21/2 76.1 - - M 8 2500 700 16 x 1.90 54 33138BKI 8 x 83 - 82.5 - - M 8 2500 700 16 x 1.90 54 33139BKI 8 x 89 3 88.9 - - M 8 2500 700 16 x 1.90 54 33140
BKI 12 x 95 - 95 - - M 12 5000 2000 25 x 2.75 60 33241BKI 12 x 102 31/2 101.6 - - M 12 5000 2000 25 x 2.75 60 33242BKI 12 x 108 - 108 - - M 12 5000 2000 25 x 2.75 60 33243BKI 12 x 114 4 114.3 - - M 12 5000 2000 25 x 2.75 60 33244BKI 12 x 121 - 121 - - M 12 5000 2000 25 x 2.75 60 33245BKI 12 x 127 - 127 - - M 12 5000 2000 25 x 2.75 60 33246BKI 12 x 133 - 133 - - M 12 5000 2000 25 x 2.75 60 33247BKI 12 x 140 5 139.7 - - M 12 5000 2000 25 x 2.75 60 33248BKI 12 x 146 - 146 - - M 12 5000 2000 25 x 2.75 60 33250BKI 12 x 152 - 152.4 - - M 12 5000 2000 25 x 2.75 60 33251BKI 12 x 159 - 159 - - M 12 5000 2000 25 x 2.75 60 33252BKI 12 x 168 6 168.3 - - M 12 5000 2000 25 x 2.75 60 33253BKI 12 x 171 - 171 - - M 12 5000 2000 25 x 2.75 60 33254BKI 12 x 193 - 193.7 - - M 12 5000 2000 25 x 2.75 60 33256BKI 12 x 219 8 219.1 - - M 12 5000 2000 25 x 2.75 60 33258
* Except BKI 6 x 15 and BKI 6 x 18.** To achieve good sound suppression do not overload the fi tting.
�
BKI
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
iling
, Wa
ll an
d F
loo
r Clip
s
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.29P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.29P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.29P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.29P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.29
������ BKK clips for copper pipe and BKP clips for plastic pipes
◆ BKK and BKP clips: sleeve and ball joint electrolytically zinc-plated.
◆ Provision for additional clips to be installed beneath using the BO/BOK connector
(subject to overall design loads) whilst maintaining flexibility*.
Types and dimensions of sound suppressing str ips SR Type Clip
Ø internal with liningLength of the rubber strip
in cm per clipType of rubber strip
Types and dimensions F lamco BKK cl ipsType Pipe size
ext. dia. Threaded
connectionMax. working
loadStrip
dimensionsA Code
numberin mm in N in mm in mm
Types and dimensions F lamco BKP cl ipsType Pipe size
ext. dia.Threaded
connectionMax.
working loadStrip
dimensionsA Code
numberin mm in N in mm in mm
BK 12 x 241 229 76 SR 3BK 12 x 244 232 77 SR 3BK 12 x 267 255 84 SR 3BK 12 x 273 261 86 SR 3BK 12 x 299 287 95 SR 3BK 12 x 323 311 102 SR 3BK 12 x 355 343 112 SR 3BK 12 x 368 356 116 SR 3BK 12 x 406 394 128 SR 3
BKK 6 x 12* 12 M 6 650 12 x 1.5 40 34110BKK 6 x 15* 15 M 6 650 12 x 1.5 40 34112BKK 6 x 18* 18 M 6 650 12 x 1.5 40 34114BKK 6 x 22 22 M 6 650 12 x 1.5 40 34116BKK 6 x 28 28 M 6 650 12 x 1.5 40 34118BKK 6 x 35 35 M 6 650 12 x 1.5 40 34120BKK 6 x 42 42 M 6 650 12 x 1.5 40 34122BKK 6 x 54 54 M 6 650 12 x 1.5 40 34124 BKK 8 x 68 68 M 8 1000 16 x 1.9 54 34226BKK 8 x 80 80 M 8 1000 16 x 1.9 54 34227
BKP 6 x 40 40 M 6 1500 12 x 1.5 40 32433BKP 6 x 50 50 M 6 1500 12 x 1.5 40 32434BKP 6 x 63 63 M 6 1500 12 x 1.5 40 32436BKP 6 x 75 75 M 6 1500 12 x 1.5 40 32438BKP 6 x 90 90 M 6 1500 12 x 1.5 40 32441BKP 6 x 110 110 M 6 1500 12 x 1.5 40 32444BKP 6 x 125 125 M 6 1500 12 x 1.5 40 32446
BKP 8 x 140 140 M 8 2500 16 x 1.9 54 32549BKP 8 x 160 160 M 8 2500 16 x 1.9 54 32553BKP 8 x 200 200 M 8 2500 16 x 1.9 54 32570
* Except BKK 6 x 12, BKK 6 x 15 and BKK 6 x 18.
�
BKK
�
BKP
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
ilin
g,
Wa
ll a
nd
Flo
or
Cli
ps
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.30
������
C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s
Flamco BKR clips for cast-iron sewer pipes, caps, BO/BOK connection clips, BSC clips and EB eye bolts
◆ Material for the cap is black PVC.
◆ Type BO electrolytically zinc-plated.
◆ Type BOK: clip copper, sleeve and nuts electrolytically zinc-plated.
◆ BSC clip sendzimir zinc-plated and fitted with a sound suppressing rubber lining.
Types and dimensions F lamco BKR cl ipsType Int. dia.
of pipePipe size
ext. dia.
Threadedconnection
Max. working
load
Stripdimensions
A Suitable forconnection
clips
Codenumber
in mm in mm in N in mm in mm
Types and dimensions T socketsType Suitable for threaded rod Dimensions in mm Code
A B Ø C number
Types and dimensions BO/BOK connect ion cl ipsType Upper
hangingThreaded rod A Max.
working loadCode
numberBK (I) clip in mm in N
Types and dimensions F lamco BSC cl ipsType Pipe size
ext. dia.Threaded
conntectionsDimensions in mm Max.
working loadStrip
dimensionsCode
numberin mm in inches A C Ø D N in mm
Types and dimensions EB eye bol ts for BSC cl ipsType Threaded connection Dimensions
in mmMax.
working loadCode
numberH F Ø G N
BKR 8 x 50 50 60 M 8 2500 16 x 1.9 54 BO 8 31234BKR 8 x 70 70 80 M 8 2500 16 x 1.9 54 BO 8 31237BKR 8 x 100 100 112 M 8 2500 16 x 1.9 54 BO 8 31242BKR 8 x 125 125 137 M 8 2500 16 x 1.9 54 BO 8 31246BKR 8 x 150 150 162 M 8 2500 25 x 2.75 60 BO 12 31251BKR 8 x 200 200 212 M 8 2500 25 x 2.75 60 BO 12 31258
T 6 M 6 30 15 70501T 8S M 8 32 15 70512T 8 M 8 37 21 70502T 12 M 12 57 30 70504
BO 6 BK (I) 6 M 6 37 1500 80201BO 8 BK (I) 8 M 8 55 2500 80202BO 12 BK (I) 12 M 12 56 5000 80204
BOK 6 BKK 6 M 6 37 600 80211BOK 8 BKK 8 M 8 35 750 80212
BSC 3/8 17.2 3/8 17.2 12 8.5 750 20 x 1.0 33271BSC 1/2 21.3 1/2 21.3 12 8.5 750 20 x 1.0 33272BSC 3/4 26.9 1/4 26.9 12 8.5 750 20 x 1.0 33273BSC 1 33.7 1 33.7 12 8.5 750 20 x 1.0 33274BSC 11/4 42.3 11/4 42.4 12 8.5 750 20 x 1.0 33275BSC 11/2 48.3 11/2 48.3 12 8.5 750 20 x 1.0 33276BSC 2 60.3 2 60.3 12 8.5 750 20 x 1.0 33277BSC 21/2 76.1 21/2 76.1 12 11 1500 25 x 2.0 33278BSC 3 88.1 3 88.1 12 11 1500 25 x 2.0 33279BSC 110 110 - 110 12 11 1500 25 x 2.0 33280BSC 4 114.3 4 114.3 12 11 1500 25 x 2.0 33281
EB 25 - 8 M 8 46 25 12 3500 33267EB 25 - 10 M 10 46 25 12 3500 33268EB 18 - 8 M 8 36 18 9 3000 33269
BKR
T
BO/BOK
BSC
EB
�
�
�
�
�
�����
�
�
�
�
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
iling
, Wa
ll an
d F
loo
r Clip
s
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.31P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.31P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.31P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.31P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.31
������ Sound suppressing strips SR, LB mounting tape, EB eye bolts, and HM bolts
◆ SR sound suppressing lining for clips (SR 0, 1, 2 and 3) and Flamco rail (SR 4, see
page 6.2).
◆ When the SR strip is used the associated clip chosen must be larger than the outside
diameter of the pipe to be fitted.
◆ Mounting strip type LB 17 zinc-plated.
◆ Mounting strip types LB 19 and 27 electrolytically zinc-plated, completely encased in
plastic.
◆ Eye bolts EB and bolts HM are used to fix mounting strip LB to the ceiling.
Types and dimensions of SR sound suppressing str ipsType Clip Quality Shore Dimensions in mm Specifi c Code
type stripdimensions
in mm
hardness
B H D
weight
gr./cm3
number
Types and dimensions LB mount ing tapeType Dimensions in mm Max.
working loadCode
numberwidth holes A
Types and dimensions EB eye bol tsType Screw thread Details Code number
Types and dimensions HM bol tsType Screw thread Details Code number
LB 17 17 Ø 6.5 15 800 71020LB 19 19 Ø 6.5 15 800 71021LB 27 27 Ø 8.5 15 1400 71022
EB 6 x 25 M 6 x 25 screw thread and slotted hole 71024EB 8 x 20 M 8 x 20 screw thread and round hole 71027EB 6 x 50 H 6 x 50 wood screw thread and slotted hole 71023
SR 0 BM 8 10 x 1.25 LR 155/1 55º 13.5 5.7 3 1.18 71121SR 1 BK 6 12 x 1.55 LR 155/1 55º 16.5 7.2 3.9 1.29 71111 BM 10 12 x 1.55 LR 155/1 55º 16.5 7.2 3.9 1.29 71111SR 2 BK 8 16 x 1.95 LR 155/1 55º 20.5 10.5 6.3 1.29 71112 BM 12 16 x 1.95 LR 155/1 55º 20.5 10.5 6.3 1.29 71112SR 3 BK 12 25 x 2.75 LR 155/1 55º 31.5 12 6.3 1.29 71113
HM 6 x 25 M 6 x 25 hexagonal head bolt 71028HM 8 x 20 M 8 x 20 cylinder head bolt 71029
�
�
�
�
SR
LB
EB 6 X 25
EB 8 X 20
EB 6 X 50
HM 6 X 25
HM 8 X 20
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
ilin
g,
Wa
ll a
nd
Flo
or
Cli
ps
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.32
������
C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s
Flamco BM clips for mounting threaded pipe, fire tube, and thin-walled steel pipe
◆ The one-piece clip can withstand a very high load.
◆ Fixing material is hidden behind the clip.
◆ Plugs are supplied with the clips.
◆ Threaded wood screw with torx connection so that these can be screwed with
a hand drill.
◆ Clip sendzimir, other parts electrolytically zinc-plated.
Types and dimensions F lamco BM cl ipsType Threaded
tubeFiretube
Thin-walledsteel pipe
Threadedconnection
Max.working
Stripdimen-
Code numberversion
nom.dia.
in inchesext. dia.in mm
ext. dia.
in mm
ext. dia.
in mm
load is pull-out
force in N
sions
in mm su hk hl
BM 8 x 12 - - - 12 M 8 1300 10 x 1.2 36610 36110 36410BM 8 x 15 - - - 15 M 8 1300 10 x 1.2 36612 36112 36412BM 8 x 18 - - - 18 M 8 1300 10 x 1.2 36601 36101 36401BM 8 x 22 - - - 22 M 8 1300 10 x 1.2 36602 36102 36402BM 8 x 28 - - - 28 M 8 1300 10 x 1.2 36618 36118 36418BM 8 x 35 - - - 35 M 8 1300 10 x 1.2 36620 36120 36420
BM 10 x 42 - - - 42 M 10 2000 12 x 1.5 36705 36205 -
BM 8 x 1/4 1/4 - - - M 8 1300 10 x 1.2 36600 36100 -BM 8 x 3/8 3/8 17.2 - - M 8 1300 10 x 1.2 36601 36101 36401BM 8 x 1/2 1/2 21.3 - - M 8 1300 10 x 1.2 36602 36102 36402BM 8 x 3/4 3/4 26.9 - - M 8 1300 10 x 1.2 36603 36103 36403BM 8 x 1 1 33.7 - - M 8 1300 10 x 1.2 36604 36104 36404
BM 10 x 11/4 11/4 42.4 - - M 10 2000 12 x 1.5 36705 36205 36505BM 10 x 11/2 11/2 48.3 - - M 10 2000 12 x 1.5 36706 36206 36506BM 10 x 2 2 60.3 - - M 10 2000 12 x 1.5 36707 36207 36507
BM 8 x 25 - - 25 - M 8 1300 10 x 1.2 36630 36130 -BM 8 x 30 - - 31.8 - M 8 1300 10 x 1.2 36631 36131 -BM 8 x 38 - - 38 - M 8 1300 10 x 1.2 36632 36132 -
BM 10 x 44 - - 44.5 - M 10 2000 12 x 1.5 36733 36233 36533BM 10 x 51 - - 51 - M 10 2000 12 x 1.5 36734 36234 BM 10 x 57 - - 57 - M 10 2000 12 x 1.5 36735 36235 -
BM 12 x 64 - - 63.5 - M 12 3300 16 x 1.9 36836 36336 -BM 12 x 70 - - 70 - M 12 3300 16 x 1.9 36837 36337 -BM 12 x 76 21/2 76.1 76.1 - M 12 3300 16 x 1.9 36838 36338 -BM 12 x 83 - - 82.5 - M 12 3300 16 x 1.9 36839 36339 -BM 12 x 89 3 88.9 88.9 - M 12 3300 16 x 1.9 36840 36340 -BM 12 x 95 - - 95 - M 12 3300 16 x 1.9 36841 36341 -BM 12 x 102 31/2 101.6 101.6 - M 12 3300 16 x 1.9 36842 36342 -BM 12 x 108 - - 108 - M 12 3300 16 x 1.9 36843 36343 -BM 12 x 114 4 114.3 114.3 - M 12 3300 16 x 1.9 36844 36344 -
Plug sizes for types hk and hl:BM 8 Ø 10 x 50BM 10 Ø 12 x 60BM 12 Ø 14 x 70.
BM SU
BM HK
BM HL
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
iling
, Wa
ll an
d F
loo
r Clip
s
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.33P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.33P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.33P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.33P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.33
������
◆ BMA clips supplied with a noise suppressing rubber lining.
◆ BMA clips for mounting threaded pipe, sprinkler pipe, thin-walled steel and
copper pipe.
◆ BMA clip sendzimir, other parts electrolytically zinc-plated.
◆ BMK clips for mounting copper pipe work.
Flamco BMA clips with noise suppressing rubber lining and Flamco BMK clips for fitting copper pipes
Types and dimensions F lamco BMK cl ipsType Ext. dia.
of pipeThreaded
connectionMax. working
loadStrip
dimensionsCode number
versionin mm in N in mm su hk hl
Types and dimensions F lamco BMA cl ipsType Threaded tube Copper
pipeSprink-
lerpipe
Thin-w.steelpipe
Threa-ded
connec-
Max.working
load
in N
Max.working
load*
Stripdimen-sions
Code number
versionnom.dia.
in inch.ext. dia.in mm
ext. dia.in mm
ext. dia.in mm
ext. dia.in mm
tion 20 dB(A)in N in mm su hk
BMA 8 x 12 - - 12 - 12 M 8 1300 250 10 x 1.2 37110 37010BMA 8 x 15 - - 15 - 15 M 8 1300 250 10 x 1.2 37112 37012BMA 8 x 18 - - 18 - 18 M 8 1300 250 10 x 1.2 37101 37001BMA 8 x 22 - - 22 - 22 M 8 1300 250 10 x 1.2 37102 37002BMA 8 x 28 - - 28 - 28 M 8 1300 250 10 x 1.2 37118 37018
BMA 10 x 35 - - 35 - 35 M 10 2000 400 12 x 1.5 37120 37020BMA 10 x 42 - - 42 - 42 M 10 2000 400 12 x 1.5 37105 37005BMA 10 x 54 - - 54 - 54 M 10 2000 400 12 x 1.5 37122 37022
BMA 8 x 3/8 3/8 17.2 - - - M 8 1300 250 10 x 1.2 37101 37001BMA 8 x 1/2 1/2 21.3 - - - M 8 1300 250 10 x 1.2 37102 37002BMA 8 x 3/4 3/4 26.9 - - - M 8 1300 250 10 x 1.2 37103 37003BMA 8 x 1 1 33.7 - - - M 8 1300 250 10 x 1.2 37104 37004
BMA 10 x 11/4 11/4 42.4 - - - M 10 2000 400 12 x 1.5 37105 37005BMA 10 x 11/2 11/2 48.3 - - - M 10 2000 400 12 x 1.5 37106 37006BMA 10 x 2 2 60.3 - - - M 10 2000 400 12 x 1.5 37107 37007
BMA 10 x 44 - - - 44.5 - M 10 2000 400 12 x 1.5 37133 37033BMA 10 x 51 - - - 51 - M 10 2000 400 12 x 1.5 37134 37034BMA 10 x 57 - - - 57 - M 10 2000 400 12 x 1.5 37135 37035
BMA 12 x 64 - - - 63.5 - M 12 3300 700 16 x 1.9 37136 37036BMA 12 x 70 - - - 70 - M 12 3300 700 16 x 1.9 37137 37037BMA 12 x 76 21/2 76.1 - 76.1 - M 12 3300 700 16 x 1.9 37138 37038BMA 12 x 83 - - - 82.5 - M 12 3300 700 16 x 1.9 37139 37039BMA 12 x 89 3 88.9 - 88.9 - M 12 3300 700 16 x 1.9 37140 37040BMA 12 x 95 - - - 95 - M 12 3300 700 16 x 1.9 37141 37041BMA 12 x 102 31/2 101.6 - 101.6 - M 12 3300 700 16 x 1.9 37142 37042BMA 12 x 108 - - - 108.5 - M 12 3300 700 16 x 1.9 37143 37043BMA 12 x 114 4 114.3 - 114.3 - M 12 3300 700 16 x 1.9 37144 37044
BMK 8 x 12 12 M 8 1000 10 x 1.2 38610 38110 -BMK 8 x 15 15 M 8 1000 10 x 1.2 38612 38112 38412BMK 8 x 18 18 M 8 1000 10 x 1.2 38614 38114 -BMK 8 x 22 22 M 8 1000 10 x 1.2 38616 38116 38416BMK 8 x 28 28 M 8 1000 10 x 1.2 38618 38118 38418BMK 8 x 35 35 M 8 1000 10 x 1.2 38620 38120 38420
BMK 10 x 42 42 M 10 1700 12 x 1.5 38622 38122 38422BMK 10 x 54 54 M 10 1700 12 x 1.5 38624 38124 38424
BMK 12 x 68 68 M 12 3000 16 x 1.9 38826 38326 -BMK 12 x 80 80 M 12 3000 16 x 1.9 38827 38327 -
Plug sizes for types hk and hl:BM 8 Ø 10 x 50BM 10 Ø 12 x 60BM 12 Ø 14 x 70.
* To achieve good sound suppression do not overload the fi tting.
BMA SU
BMA HK
BMK SU
BMK HK
BMK HL
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
ilin
g,
Wa
ll a
nd
Flo
or
Cli
ps
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.34
������
C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s
Flamco DP clips and pipe support
◆ DP double pipe clips are supplied with a reinforced back plate with a slot
of 18 x 8 mm.
◆ Loosening or tightening the bolt is possible with spanner or screwdriver.
◆ Pipe support fitted with slots 30 x 6.5 mm for attaching the DP double pipe clip and a
slot 20 x 8.5 mm for mounting to the floor.
◆ DP pipe clips are adjustable for depth.
Types and dimensions for F lamco DP double cl ips without l in ingType Threaded tube Thin-
walledA B Code
numberB Code
numberB Code
numbernom.dia.
in inchesext. dia.in mm
steel pipeext. dia.in mm in mm in mm in mm in mm
Types and dimensions F lamco DP s ingle cl ipsType Threaded tube Thin-
walledB Code
numberB Code
numberB Code
numbernom.dia.
in inchesext. dia.in mm
steel pipeext. dia.in mm in mm in mm in mm
Type and dimensions of F lamco pipe supportType Dimensions in mm Code number
A B C H
Types and dimensions for F lamco DP double cl ips with l in ingType Threaded tube Thin-walled Dimensions in mm Code number
nom.dia.
in inchesext. dia
mm
steel pipeext. dia.in mm A B
DP 15 - - 15 60 79 - 62 38016 66 - 49 38017 - -DP 1/2 1/2 21.3 22 60 82 - 65 38018 69 - 54 38019 - -DP 3/4 3/4 26.9 28 60 80 - 70 38020 68 - 57 38021 - -DP 1 1 33.7 35 60 83 - 63 38022 67 - 60 38023 - -
DP 15 - - 15 70 80 - 62 38000 68 - 52 38001 59 - 46 38002DP 1/2 1/2 21.3 22 70 82 - 66 38003 71 - 55 38004 61 - 49 38005DP 3/4 3/4 26.9 28 70 78 - 70 38006 69 - 59 38007 57 - 50 38008DP 1 1 33.7 35 70 96 - 74 38009 69 - 62 38010 59 - 54 38011DP 11/4 11/4 42.4 42 70 89 - 78 38012 79 - 67 38013 - -DP 11/2 11/2 48.3 - 70 92 - 81 38014 72 - 60 38015 - -
DP 15 - - 15 67 - 50 38040 58 - 44 38041 55 - 46 38042DP 1/2 1/2 21.3 22 70 - 55 38043 59 - 47 38044 60 - 47 38045DP 3/4 3/4 26.9 28 69 - 59 38046 60 - 50 38047 55 - 46 38048DP 1 1 33.7 35 85 - 63 38049 60 - 53 38050 52 - 46 38051DP 11/4 11/4 42.4 42 78 - 66 38052 69 - 57 38053 - -DP 11/2 11/2 48.3 - 82 - 70 38054 72 - 60 38055 - -
Pipe support 65 70 38 200 71770
DP 15 - - 15 60 54 - 69 38030DP 1/2 1/2 21.3 22 60 57 - 68 38031DP 3/4 3/4 26.9 28 60 60 - 67 38032DP 1 1 33.7 35 60 65 - 77 38033
�
�
�
�
�
�
�
DP
DP
PIPE SUPPORT
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
Ce
iling
, Wa
ll an
d F
loo
r Clip
s
P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.35P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.35P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.35P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.35P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.35
������ RWK, RWK-G and RWS clips
◆ Particularly suitable for visible wall mounting with wire tack (diameter 8 mm).
◆ RWK-G fitted with noise-reducing EPDM rubber insert for temperatures
from – 40 °C to + 120 °C.
◆ With six-sided nut with saw slot for quick and easy fitting. RWS wtih two six-sided
nuts with saw slot.
◆ RWK, RWK-G and RWS clips are electrolytically-galvanized.
Types and dimensions for RWK cl ipsType Ext. dia.
of pipeThreaded tube Length of
wire tackStrip
dimensionsCode
numberin mm in inches Ø 8 mm in mm
Types and dimensions for RWK-G cl ipsType Ext. dia.
of pipeThreaded tube Length of
wire tackStrip
dimensionsCode
numberin mm in inches Ø 8 mm in mm
Types and dimensions for RWS cl ipsType Ext. dia.
of pipeThreaded tube Length of
wire tackStrip
dimensionsCode
numberin mm in inches Ø 8 mm in mm
RWK
RWK-G
RWS
RWK 3/8 17.2 3/8 50 20 x 2 51411RWK 1/2 21.3 1/2 50 20 x 2 51412RWK 3/4 26.9 3/4 50 20 x 2 51413RWK 1 33.7 1 50 24 x 2.5 51414RWK 11/4 42.4 11/4 50 24 x 2.5 51415RWK 11/2 48.3 11/2 50 24 x 2.5 51416RWK 2 60.3 2 75 40 x 3 51417
RWK-G 3/8 17.2 3/8 50 20 x 2 51421RWK-G 1/2 21.3 1/2 50 20 x 2 51422RWK-G 3/4 26.9 3/4 50 20 x 2 51423RWK-G 1 33.7 1 50 24 x 2.5 51424RWK-G 11/4 42.4 11/4 75 24 x 2.5 51425RWK-G 11/2 48.3 11/2 75 24 x 2.5 51426
RWS 3/8 17.2 3/8 80 20 x 2 51401RWS 1/2 21.3 1/2 80 20 x 2 51402RWS 1/2 21.3 1/2 200 20 x 2 51409RWS 3/4 26.9 3/4 80 20 x 2 51403RWS 1 33.7 1 80 20 x 2 51404RWS 11/4 42.4 11/4 80 20 x 2 51405RWS 11/2 48.3 11/2 80 20 x 2 51406
18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK
CEILING, WALL AND FLOOR CLIPS
◆ CONTENTS PAGE
◆ BS clips with rubber lining 1.2/1.3
◆ BS clips without rubber lining 1.4
◆ BK clips 1.6/1.7
◆ BM clips 1.8/1.9
◆ Tables 1.10/1.35
Copyright Flamco UK Limited. No part of this publication may be reproduced or
published in any way without explicit mention of the source. The data listed are
solely applicable to Flamco products. Flamco UK Limited shall accept no liability
whatsoever for incorrect use, application or interpretation of the technical informa-
tion. Flamco UK Limited reserves the right to make technical alterations
Flamco UK Limited conditions of sale apply.
18502589
������Flamco UK Limited
Unit 4, St. Michael’s Road
Lea Green Industrial Estate
St. Helens, Merseyside
WA9 4WZ
Tel.: +44 (0) 1744 818100
Fax: +44 (0) 1744 830400
www.flamco.co.uk
BSA
BSF-D
KB
BK
BMA
There is more information on the CD that
accompanies this brochure.