Embed Size (px)
Citation preview
Materials Research 2018
Website: https://materialsresearch.conferenceseries.com/
Materials Research 2018
15th Annual Conference on Materials Research and Technology
February 19-20, 2018 Paris, France
Theme: Advance Materials Research for Better Future
Tentative Program
Conference Secretariat
Kemp House, 152 City Road, London EC1V 2NX
Materials Research 2018
Website: https://materialsresearch.conferenceseries.com/
15th Annual Congress on
Materials Research and Technology February 19-20, 2018 Paris, France
Program at a Glance
Day 1
Reception/Registration 08.00-09.00
Time General Session 09.00-09.15 Inaugural Address
Least of 3 Keynote/Plenary Talks
09.15-09.45 Keynote/Plenary Talk 1 09.45-10.15 Keynote/Plenary Talk 2
10.15-10.45 Keynote/Plenary Talk 3
Panel Discussions/Group Photo
Coffee/Tea Break 10.45-11.00 (Networking)
11.00-12.40 Metallurgy and Materials Science Materials Science and Engineering
Lunch Break 12.40-13.30
13.30-15.30
Advanced Materials and Devices Biomaterials and Healthcare
Coffee/Tea Break 15.30-15.45 (Networking)
15.45-17.25 Workshop
Day 2
Time Session 1 Session 2
09.00-10.40 Keynote Forum
Coffee/Tea Break 10.40-10.55 (Networking)
10.55-12.35 Nanotechnology in
Materials Science Characterization and
Testing of Materials
Materials Research 2018
Website: https://materialsresearch.conferenceseries.com/
Lunch Break 12.35-13.25
13.25-15.05 Ceramics and
Composite Materials
Materials Chemistry Materials Physics
Coffee/Tea Break 15.05-15.20 (Networking)
15.20-17.00
Materials in Industry
Polymer Science and Engineering
Energy Materials Emerging Smart
Materials
Poster Presentation @ 17:00-18:00
Awards & Closing Ceremony
***NOTE: Program Schedule is subject to change with final allotment of the speaker slots***
For Scientific program:
https://materialsresearch.conferenceseries.com/scientific-program
Materials Research 2018
Website: https://materialsresearch.conferenceseries.com/
Scientific Program Day 1 February 19, 2018
Registrations
Opening Ceremony
Title: Potential and limitations of 2D materials: Insights from computational theory
Udo Schwingenschlögl , King Abdullah University of Science and Technology, SA
Networking & Refreshment Break
Panel Discussion
Title: Analysis of defects encountered in resistance spot welding
Peng-Sheng Wei, National Sun Yat-Sen University, Taiwan
Title: Complexity and anisotropy of plastic flow of commercially pure Ti on multiple scales
Mikhail A Lebyodkin, Université de Lorraine, France
Title: Present status and future prospects for super low‐cost Cu2O‐based solar cells.
Toshihiro Miyata, Kanazawa Institute of Technology, Japan
Title: Microstructure and mechanical properties of a commercial beta titanium alloy modified with B4C
Vitor V Rielli, University of Campinas, Brazil
Title: The Children’s School Micro Climate’s Wear At Different Humidity Conditions Pressure
Ahmad Tahan, Damietta University, Egypt
Lunch break
Title: Electrically controllable spin states in single-layer graphene: Direct observation by ESR spectroscopy
Kazuhiro Marumoto , University of Tsukuba, Japan
Title: Discrete differential geometry concepts for the analysis of finite deformations in single and multi-layered
2D nano-structures
Alejandro Pacheco-Sanjuán, Universidad Técnica Federico Santa Maria, Chile
Title: Main-chain polyelectrolyte based on 1,2,3-triazolium with pentaethylene oxide spacer obtained via ‘click’
chemistry for all-solid state electrochromic device applications
John Marc C. Puguan, Myongji University, Republic of Korea
Title: Spark plasma sintering of boron carbide ceramics: Densification mechanisms and thermomechanical
properties
Antou Guy, University of Limoges, France
Title: Understanding the Unique Electronic Properties of Nano Structures Using Photoemission Theory
Soonnam Kwon, PAL-XFEL, Republic of Korea
Title: Synthesis of complex-shaped microparticles via phase separation in microfluidic device
Kyoung Duck Seo, Wonkwang University, Republic of Korea
Title: Transfer free graphene growth at and below 250oC using novel catalysts
Masaki Tanemura, Nagoya Institute of Technology, Japan
Materials Research 2018
Website: https://materialsresearch.conferenceseries.com/
Title: Theoretical design of flat building blocks for flat silicene with density functional theory calculations
Masae Takahashi, Tohoku University, Japan
Title: Strong Correlation Effects on the Electrical Permittivity of Two-dimensional Systems
Raymond Frésard, Normandie University, France
Title: Elucidating the role of Sn-substitution and Pb-(vac) in regulating stability and carrier concentration in
CH3NH3Pb1−X−YSnX(vac)YI3
Saswata Bhattacharya, Indian Institute of Technology Delhi, India
Title: Properties of cluoro-perovskite CsMnCl3 as predicted from first- principles calculations
Yamina Sefir, Abdelhamid Ibn Badis University, Algeria
Title: Feasibility of Thermal to Electrical Energy Conversion in Nanofiber Layer
Mahsa Abbasi, Amirkabir University of Technology, Iran
Title: Illumination effects on the electric characteristics of AU/GaN/GaAs Schottky diode
Abdelaziz Rabehi, Renewable Energy Development Centre URAER, Algeria
Title: Thermochemical investigation of mixtures PVDF/PLA in the conditions of the extrusion
Abderrahmane Lamri, Arts et Métiers Paris Tech, France
Title: Effect of sea crab (callinectes amnicola) shell reinforcement on high density polyethylene composite
Abdulrahman Asipita Salawu , Federal University of Technology, Nigeria
Panel Discussion
Title: Effect of nano-zones on thermal shock behavior of mixed composite top coat APS TBCs
Afshin Ashofteh , University of Tehran, Iran
Title: β phase transformation and piezoelectric properties of PVDF/surfactant composite nanofiber layers
Arezoo Mahdavi, Amirkabir University of Technology, Iran
Title: Systematic investigation of biofilm formation of acetogens and methanogens derived from agro-industrial
wastewater using microfluidic devices and fabricated biointerface
Arslan Siddique, KMUTT, Thailand
Title: Thermoplastic polyurethane/MWCNT nanocomposite as piezoresistive material: the influence of TPU
viscoelastic behavior upon pressure sensitivity
Elahe Sadat Hejazi, Amirkabir University of Technology, Iran
Title: Mechanical properties of a warm-forged twinning induced plasticity steel
Fusheng Han, Chinese Academy of Sciences, China
Title: Sustainable textured ceramics: Formulation of clay slurries for tape casting and properties of tapes
Gisèle Lecomte-Nana , University of Limoges, France
Title: In-situ AlN/Al2O3 composite powder formation using dextrose-assisted carbothermal Reduction
Hajar Ghanbari, Iran University of Science and Technology, Iran
Title: Study of Mechanical Properties of Nanocomposites (Poly(Lactic acid)/ NanoClay/ Epoxidized soybean
oil)
Khadijeh Eslami, Amirkabir University of Technology, Iran
Title: Bioreactors for cell maturation: application to spermatogenesis
Laurent David, University Lyon, France
Materials Research 2018
Website: https://materialsresearch.conferenceseries.com/
Networking & Refreshment Break
Title: Different Roles of Carbonate Additives on Hexagonal Boron Nitride Microstructure Prepared from Urea
and Boric Acid
Nasrin Shahmohamadi, Iran University of Science & Technology, Iran
Title: How nanoparticle geometry affect the morphological evolution of block copolymers
Noushin Hasanabadi, Amirkabir University of Technology, Iran
Title: Analysis of heat transfer in a closed cavity ventilated inside
Benseghir Omar, Bahmed Mohamed, USTHB, Algeria
Title: Utilization of Designed Al-Doped ZnO (MicNo®-AZO) Particles for Antistatic Applications
Pınar Şengun, Anadolu University, Turkey
Title: First Principle Calculation of Lattice Constants and Formation Energy for Generalized Quasirandom
Structures of InGaN Alloy.
Rohin Sharma, Kathmandu University, Nepal.
Title: Chemical Stability of Zinc Stannate in Aqueous Media
Sadiye Erden, Anadolu University, Turkey
Title: Structural, electronic, magnetic and optical properties of CdCoTe and CdMnTe diluted magnetic
semiconductors
Ali Zitouni, Abdelhamid Ibn Badis University, Algeria
Title: The variations of temperature with different parameters and effect that on the thermal conductivity of
compressed earth blocks stabilized by cement.
Najat Zakham, Mohamed V University, Morocco
Title: Effect of Sb additive on the optical parameters of Se-Te chalcogenide films
Ossama El-Shazly, Alexandria University, Egypt
Panel Discussion
************* Speaker Slots Available****************
Day 2 February 20, 2018
Title: Ad layer sulfur on Au(111) from piperazine bis(dithiocarbamate) sodium salt ethanol solution
Mayra P Hernandez, IMRE-UH, Cuba
Title: Effect of polydopamine-modified surface for electrospun LiMPO4 cathode material
Mira Shin, Korea National University of Transportation, Republic of Korea
Title: Residual stress Behaviours of Steel heated and submitted to the uniaxial load by NDT methods
Mourad Zergoug, Research Center in Industrial Technologies, Algeria
Panel Discussion
Title: Fabrication of carbon nanostructures by advanced plasma nano-processes
Mineo Hiramatsu, Meijo University, Japan
Title: Elaboration and structural characterization of new materials of KDP-Family
Rawdha Dekhili, Université de Lorraine, France
Materials Research 2018
Website: https://materialsresearch.conferenceseries.com/
Title: Experimental characterization of the different inorganic light emitting diodes (LEDS) and the
photovoltaic effect on these LEDs
Remidi Kamel, ENS, Kouba
Title: Transport and magnetoresistance studies on nanoparticle (x = 0 and 0.2) samples: Effect of nanometric
grain size
R. Skini, Immanuel Kant Baltic Federal University, Russia.
Title: Anisotropic Radio-Chemically Pore-Filled Composite Proton Exchange Membranes for Fuel Cell
Tauqir A. Sherazi, COMSATS Institute of Information technology, Pakistan
Lunch break
Title: Structural and Magnetic Analysis of Holmium substituted YIG series (HoxY3-xFe5O12, x = 0.1, 0.3, 0.6,
0.9, 1.2, 1.5) prepared by Conventional Ceramic Method
Kausar Javed Khan, LCWU, Pakistan
Title: Numerical and Experimental Study on Temperature Energy Harvesting in Barium Titanate/Copper
Laminated Composites
Fumio Narita, Professor, Tohoku University, Japan
Title: A modeling interpretation of an in-situ Transmission Electron Microscopy (TEM) ion implantation
experiment
Di Yun, Xi’an Jiaotong University, U.S.A.
Title: On the application of the functional approach to the methods of processing layered superhard composites
Alexandr Salenko, Kremenchug, Ukraine
Title: Structural characterization of pure and doped Tricalcium phosphates prepared by solid state method
Asmaa El Khouri, Istituto di Cristallografia, Rome, Italy
Title: Investigating the effect of UV radiation changes and substrate temperature in photocatalytic destruction
of toluene in a circular fluid substrate reactor
Gholamhossein Pourtaghi, Tehran University of Medical Sciences, Iran
Title: Laboratory for strategic materials: extraction, processing, and utilization of strategic materials
Gisele Azimi, University of Toronto, Canada
Title: Antimicrobial activity of electrodeposited copper coating on double zincated aluminium plate
K.Rajendra Udupa, National Institute of Technology Karnataka, India
Title: Effect of UV-irradiation on Fluorescence of Poly (para-ethoxystyrene) films with Phthalate and
Terephthalate Plasticizers
Khalid E. Al Ani, Jadara University, Jordan
Title: Preparation of alumina catalysts supports for petroleum hydrotreating: influence of the kneading
conditions
Lucie Speyer, IFP Energies Nouvelles, France.
Title: STUDY OF STRUCTURAL AND ELASTIC PROPERTIES OF FULL-HEUSLER ALLOYS Cs2CrGe
Samira Cherid, Abdelhamid Ibn Badis University, Algeria
Title: Accuracy in bracket position with a CAD/CAM aided indirect bonding system in the posterior teeth with
different cusp heights
Jiyeon Kim, Ewha Womans University, Republic of Korea
Materials Research 2018
Website: https://materialsresearch.conferenceseries.com/
Title: Enhanced Magnetic Hyperthermic Efficiency of Ferrite based Nanoparticles
Jyoti Prasad Borah, NIT Nagaland, India
Panel Discussion
Title: The Integrated Waste Management and Sustainable Landfilling.
Soneye Babatunde, Forestry Research Institute Of Nigeria, Nigeria
Title: Characterization and application of new ultrafiltration ceramic membranes for water treatment
Abdelkader Chougui , Université Abdelhamid ibn badis de Mostaganem, Algeria
Title: Effect of Aging Treatment on Microstructure and Phase Precipitation of Duplex Stainless Steel
Ali Sabea Hammood, University of Kufa, Iraq
Title: Novel mesoporous material for effective adsorption of radioactive cesium
Aleksey Vasiliev, ETSU, USA
Title: Improvement in mechanical properties and fretting wear of Inconel 690 alloy for heat exchanger tube
through UNSM technique
Auezhan Amanov, Sun Moon University, Republic of Korea
Title: Biomaterials and Health Care – Indian Context
Ch. Sanjay, GITAM University Hyderabad, India
Networking & Refreshment Break
Title: Dependences pressure of structural, elastic, thermodynamic and opto-electronic properties of the
Nowotny–Juza NaZnP compound as photovoltaic material.
Fatma Saad Saoud, University of Mohamed El Bachir Ibrahimi, Algeria.
Title: Fabrication of poly(ε-caprolactone) (PCL) particles with non-spherical geometries via selective dewetting
and deposition of the polymer
Ju Hyang Park, Kyungpook National University, Republic of Korea
Title: NIR light-triggered, Localized Anti-Cancer Drug Delivery using Poly(ε-caprolactone) (PCL) Fibers
incorporated with Indocyanine Green and Phase-changeable Fatty Acid
Ji Hyeon Choi , Kyungpook National University, Republic of Korea
Title: Fatty Acid-Based Electrospun Fiber For Temperature-Controlled Drug Release
Jin Ho Son, Kyungpook National University, Republic of Korea
Panel Discussion
Title: first principle study of structural and electronic properties of double perovskites Ba2CrCoO
Sefir Brahim, Abdelhamid Ibn Badis University, Algeria
Title: High-rate squeezing process of bulk metallic glasses
Jitang Fan, Beijing Institute of Technology, China
Title: Porous Metal-Organic Framework Materials for Energy-Efficient Water sorption and Selective Gas
Adsorption
Jong-San Chang, Korea Research Institute of Chemical Technology (KRICT), Republic of Korea
Title: Inelastic deformation and fracture of single-crystal nickel-base superalloys under thermal cyclic loading
Leonid B Getsov , St.Petersburg Polytech, Russia
Title: The Effect Of TMCP Rolling On Microstructure And Hardness Of SMAW Welded A516 Steel Sheets
Kahila Baghchesaraee, University of Semnan , Iran
Materials Research 2018
Website: https://materialsresearch.conferenceseries.com/
Title: Challenges and Dimensions of collective memory to conserve Housing network within an urban context
as modern monument: General consideration and the case of Siedlung Gropius Törten Estate in Dessau’s
modern monument with material contradictions
Sayed Ahmed, Bangladesh University, Dhaka
Title: Spinorbitronics at Interfaces for THz Emission
Henri Jaffrès, Unité Mixte de Physique CNRS-Thales, France
Title: Preparation of new smart materials based on cellulose paper
Jordi Rull-Barrull, University of Strasbourg, France
Title: A performance of ELISA and a quality of milk in Algeria
Ould Yerou Karima , Université de sidi Bel Abbes-Algérie, Algeria
Title: Impedance Spectroscopy Theory and Applications
Nasr Sdiri , National Center of Researches in Materials Sciences, Tunisia
Title: Phytochemical study and antioxidant activity of some antidiabetic plants in the wilaya of mascara
Ould Yerou Karima , Université de sidi Bel Abbes-Algérie, Algeria
Title: Microwave assisted hydrothermal and rapid synthesis of purified copper nanowires for flexible and
transparent conducting films
Aabid Hussain Shaik, VIT University, India
Title: An approach to modeling and study of silicon clusters
Ivan Zulim, University of Split, Croatia
Title: Luminescent Lanthanide Complexes for Plasmonics and Metamaterials Studies
Alexis Bullock, Norfolk State University, USA
Networking & Refreshment Break
Title: An evaluation of microstructure and erosive behavior of HVOF WC-CoCr coatings in principle coating
parameters
Saeid Shahrzad, Mapna. Corp, Iran
Title: Physical and Chemical Investigations of Protein Based Bio-Plastics
University of Leicester, UK
Title: Effect of Chromium Addition in Corrosion Mechanism of Dual Phase High Carbon Steel
Wilson Handoko, UNSW Sydney, Australia.
Title: Flexible multi-directional strain sensors based on Polymer/CNT composites
Maximiano V. Ramos, Auckland University of Technology, New Zealand
Title: Novel Polymer Matrix Composite Reverse Osmosis Membranes Synthesis and Characterization for
Desalination of Brackish Water
Rizwana Shami
Title: Fabrication of Novel Acrylic-Based Hdrogels: Applied for Controlled Release of Organic and Inorganic
Fertilizers
Rubab Zohra, Forman Christian College, Pakistan
Title: Optimized Ordered Nanoprinting Using Focused Ion Beam
Lama Mahmoud, Masdar Institute, Abu Dhabi, UAE
Materials Research 2018
Website: https://materialsresearch.conferenceseries.com/
Title: study and characterization of the household waste of the city of Mostaganem
N. Guermoud , Algeria
Title: Formulae for safe design of components and structures
with stress-raisers against fatigue failures
Nori VSN Murthy, Independent Research Scientist, India
Title: Using Granular sulphur properties to modify granulation Units at South pars Gas Complex
Roya Moradifar, Shiraz University, Iran
Panel Discussion
Award Ceremony
************* Speaker Slots Available****************
Conference Details
Venue:
Paris, France Important Dates:
Abstract Submission Opens: June 15, 2017 Online Registration Opens: June 17, 2017 Early bird registration: November 24, 2017 On spot Registration: February 19, 2018
Conference Secretariat:
Kemp House, 152 City Road, London EC1V 2NX, UK
Toll Free: +1-800-216-6499
Ph.: +1-702-508-5200 Ext. 8035
Email: [email protected]
Materials Research 2018
Website: https://materialsresearch.conferenceseries.com/
Registration Online: https://materialsresearch.conferenceseries.com/registration.php
Tourism Attraction in Paris, France
Triumphal Arch Eiffel Tower
Musee d’Orsay Conciergeri
Materials Research 2018
Website: https://materialsresearch.conferenceseries.com/
Notre Dame de Paris
Pont Alexandre III
Louvre Museum
