12h

Environment, Health and Safety (EHS)PDF download from SAP Help Portal:http://help.sap.com/saphelp_erp60_sp/helpdata/en/a5/3adda043be11d188fe0000e8322f96/frameset.htm

Created on September 07, 2014

The documentation may have changed since you downloaded the PDF. You can always find the latest information on SAP Help Portal.

NoteThis PDF document contains the selected topic and its subtopics (max. 150) in the selected structure. Subtopics from other structures are not included.

2014 SAP SE or an SAP affiliate company. All rights reserved. No part of this publication may be reproduced or transmitted in any form or for any purposewithout the express permission of SAP SE. The information contained herein may be changed without prior notice. Some software products marketed by SAP SEand its distributors contain proprietary software components of other software vendors. National product specifications may vary. These materials are provided bySAP SE and its affiliated companies ("SAP Group") for informational purposes only, without representation or warranty of any kind, and SAP Group shall not beliable for errors or omissions with respect to the materials. The only warranties for SAP Group products and services are those that are set forth in the expresswarranty statements accompanying such products and services, if any. Nothing herein should be construed as constituting an additional warranty. SAP and otherSAP products and services mentioned herein as well as their respective logos are trademarks or registered trademarks of SAP SE in Germany and othercountries. Please see www.sap.com/corporate-en/legal/copyright/index.epx#trademark for additional trademark information and notices.

Table of content

PUBLIC 2014 SAP SE or an SAP affiliate company. All rights reserved.

Page 1 of 9

Table of content1 Environment, Health and Safety (EHS)1.1 Basic Data and Tools (EHS-BD)1.2 Product Safety (EHS-SAF)1.3 Hazardous Substance Management (EHS-HSM)1.4 Dangerous Goods Management (EHS-DGP)1.5 Waste Management (EHS-WA)1.6 Occupational Health (EHS-HEA)1.7 Industrial Hygiene and Safety (EHS-IHS)1.8 Roles for Environment, Health and Safety (EH&S)


Page 2 of 9

Environment, Health and Safety (EHS)

PurposeThis SAP component supports you with all activities in the areas of industrial safety, health, and environmental protection.

IntegrationTo be able to use all EH&S functions, you will require the following SAP components:

Function Required Component NecessaryEntry of logistical data for substances Material Master (LO-MD-MM)Setting up value assignment types Classification System (CA-CL)Implementation of engineering change management Engineering Change Management (LO-ECH)Report management Document Management (CA-DMS)Report shipping, dangerous goods management Materials Management (MM), Sales and Distribution (SD)Transfer of employee data Personnel Administration (PA-PA)Transfer of data from business partners to the injury/illness log, incident/accident log,and accident reports

SAP Business Partner (CA-BP)

Defining of exposure groups, assigning of agents Organizational Management (BC-BMT-OM)Integration of data into the work area Work Centers (PP-BD-WKC)

Functional Locations (PM-EQM-FL)Material Master (LO-MD-MM)

FeaturesEnvironment, Health and Safety comprises the following SAP components: Basic Data and Tools (EHS-BD) contains all data and functions you require for the other EH&S components at one central point. For example, you can

manage specifications for various EH&S objects (substances, dangerous goods classifications, agents, waste codes, and packagings) and text modules(known as phrases), and create templates for EH&S reports. It also includes tools that allow you, for example, to enter and display language-dependentEH&S data in all possible languages in the SAP system, and to exchange data between systems.

Product Safety (EHS-SAF) contains functions required to manage hazardous substances in companies that manufacture hazardous substances. Forexample, you can manage and ship EH&S reports such as material safety data sheets, create labels, have the system determine them automatically, andcreate the composition of the specification of the relevant substance from the BOM for a material.

Hazardous Substance Management (EHS-HSM) contains functions required to manage hazardous substances in companies that use hazardous substances.For example, functions are available that make it easier for you to create the reports prescribed by the U.S. Superfund Amendments and Reauthorization Act(SARA).

With Dangerous Goods Management (EHS-DGP), you can manage dangerous goods master records, run dangerous goods checks, and create dangerousgoods documents.

With Waste Management (EHS-WA), you can manage waste disposal processes, create the reports necessary for transportation and disposal of waste, anddistribute the resulting costs proportionally among the cost centers in the enterprise that generated the waste.

With Occupational Health (EHS-HEA), you can plan and perform health surveillance protocols in your enterprise, and create and manage occupational healthquestionnaires.

With Industrial Hygiene and Safety (EHS-IHS), you can organize industrial hygiene and safety in your enterprise and manage the hazards and agents that arepresent. In addition, you can process events with or without injury to persons and create reports such as standard operating procedures and accident reports.

1.1 Basic Data and Tools (EHS-BD)

PurposeThis SAP component contains data and functions that you require for several areas of the SAP component Environment, Health and Safety ( EH&S ).

Implementation ConsiderationsThe Basic Data and Tools are the prerequisite for you to be able to use the other SAP EH&S components:

Product Safety (EHS-SAF)


Page 3 of 9

Hazardous Substance Management (EHS-HSM) Dangerous Goods Management (EHS-DGP) Waste Management (EHS-WA) Occupational Health (EHS-HEA) Industrial Hygiene and Safety (EHS-IHS)

This means that regardless of which of the SAP EH&S components you want to use, you need to process Customizing for Basic Data and Tools and create thenecessary data in Basic Data and Tools before you implement the other components.

IntegrationYou must have installed the following SAP components to be able to use all the functions of Basic Data and Tools :

Engineering Change Management (LO-ECH) Document Management (CA-DMS) Classification System (CA-CL) Material Master (LO-MD-MM) Sales and Distribution (SD)

FeaturesBasic Data and Tools contains the following SAP components: In specification management you enter all environmentally relevant data and other data for substances (pure substances, preparations, mixtures, and residual

substances), agents, packagings, and waste codes in specifications. This data includes information on identifiers, material assignments, compositions,listings, properties, and assignments to regulatory lists.You can also enter data for dangerous goods regulations and dangerous goods classifications in specifications. You can use the filling function from the SAPcomponent dangerous goods interfaces to copy dangerous goods classification data to the dangerous goods master. For more information, see thedocumentation for the SAP component Dangerous Goods Management in the sections Dangerous Goods Basic Data, Dangerous GoodsClassification, and Tools.You can copy data on dangerous goods storage classes, VbF classes, and water pollution classes to Warehouse Management . For more information, seethe Implementation Guide (IMG) for Logistics Execution under Transfer Hazardous Substance Data from the Specification Database .

In the specification information system you can access specification data directly and display it in different ways. In report definition you set up the prerequisites for being able to print specification data on EH&S reports (such as material safety data sheets and standard

operating procedures). You design the layout of report templates using Windows Wordprocessor Integration (WWI), which gives you access to Microsoft Wordfunctions. Specially defined symbols in the report templates are replaced by values from the SAP system when reports are generated. Phrases are printedin the languages specified. You use ratings and validity areas to specify that only permitted specification data appears on the report.

You can create standard texts in the form of phrases in phrase management, reducing the amount of writing and translating necessary. Phrases are managedin libraries.

Under the tools you will find functions for importing data from legacy systems, exchanging and distributing data between systems, editing it, and archiving it.

Product Safety (EHS-SAF)

PurposeIf you produce and sell hazardous substances in your company, you must protect humans and the environment from the hazards these substances pose. Youalso have to observe numerous laws and regulations on hazardous substances worldwide. This SAP component helps you to handle hazardous substancessafely and bring them safely onto the market, and also comply with all relevant regulations automatically.

IntegrationYou must have installed the following SAP components to be able to use all functions in the SAP component Product Safety :

Basic Data and Tools (EHS-BD) Document Management (CA-DMS) Material Master (LO-MD-MM) Sales and Distribution (SD)

The SAP component Hazardous Substance Management (EHS-HSM) also supports you with managing hazardous substances, with the following distinction: Hazardous Substance Management supports companies that use hazardous substances. Product Safety supports companies that produce hazardous substances.

FeaturesProduct Safety also uses the following functions from the SAP component Basic Data and Tools : You can edit hazardous substance data and other data for the substances, agents, and packagings that exist in your company in specification

management, and search for and display them using the specification information system. You can edit EH&S reports (such as material safety data sheets, labels, and standard operating procedures) in report definition. You can import and export specifications, phrases, material safety data sheets, and other documents, and manage them after import just like all other


Page 4 of 9

EH&S data and reports.Product Safety also includes the following components and functions: Report management supports you with the required work steps for EH&S reports from their generation to their final release. For data archiving purposes, you

can save reports you no longer require with status Historical and call them at any time. Global Label Management supports you with entering all data for labels and then using this data to determine suitable labels in various labeling scenarios and

to print them. Released reports are available for report shipping. Report shipping controls the processes involved in creating a report shipping order through to saving it. As

well as allowing you to ship reports such as material data safety sheets automatically, you can set up automatic subsequent shipping for updated reports, forexample. These are then shipped automatically if, for example, the data for specifications or phrases that is output on the reports was changed.

The report information system enables you to search and display existing reports with status Released and Historical . BOM transfer supports you with creating the composition of a specification from the bill of materials for a material.

Hazardous Substance Management (EHS-HSM)

PurposeIf you use hazardous substances in your company, you must protect your employees and the environment from the hazards that these substances cause. Youalso have to observe numerous rules and regulations worldwide. This SAP component supports you with the safe handling of hazardous substances andautomatic compliance with regulations.

IntegrationYou must have installed the following components of the SAP component Environment, Health and Safety ( EH&S ) to be able to use all functions of HazardousSubstance Management :

Basic Data and Tools (EHS-BD) Product Safety (EHS-SAF) Industrial Hygiene and Safety (EHS-IHS)

Product Safety also supports you with managing hazardous substances, but with the following differences: Hazardous Substance Management supports companies that use hazardous substances. Product Safety supports companies that produce hazardous substances.

FeaturesHazardous Substance Management mainly uses functions from the components Basic Data and Tools , Product Safety , and Industrial Hygiene and Safety .

These include the following functions: You can edit hazardous substance data and other data for the substances that occur in your company in specification management, and search for and

display it using the specification information system. You can edit work areas and patterns in work area management and link them with objects in Organizational Management . You can edit agents in exposure management and assess risks and create hazardous substance inventories in risk assessment. You can edit EH&S reports (such as material safety data sheets, labels, and standard operating procedures) in report definition, release them in report

management, dispatch them using report shipping, and search for and display them using the report information system. You can import material safety data sheets and other documents from your vendors and manage them like all other EH&S reports.

These functions are located in the Environment, Health and Safety menu under the Hazardous Substance Management node. You will find the documentation forthese functions in the respective SAP components.In addition, hazardous substance management includes functions that make it easier for you to compile the reports prescribed by the U.S. SuperfundAmendments and Reauthorization Act (SARA) (see SARA Reports).

Dangerous Goods Management (EHS-DGP)

PurposeYou use the Dangerous Goods Management component to:

Edit dangerous goods-relevant material data Edit dangerous goods master records Define dangerous goods checks and run them in sales and distribution processing Define dangerous goods documents and output them automatically or manually Send dangerous goods data in electronic form for a delivery or a shipment

IntegrationTo use the Dangerous Goods Management component, you must install the following SAP components:

Materials Management (MM) Sales and Distribution (SD)


Page 5 of 9

Environment, Health and Safety (EHS)

FeaturesThe Dangerous Goods Management component consists of the following components:

Basic Data (EHS-DGP-BD) Master Data (EHS-DGP-MD) Dangerous Goods Checks (EHS-DGP-CHK) Dangerous Goods Documents (EHS-DGP-DOC) Tools (EHS-DGP-TLS) Template and One-Time Material Processing (EHS-DGP-TP)

ConstraintsThe Dangerous Goods Management component maps the legal regulations for packaged goods only in the system, and not those for bulk goods (bulk/tank).

1.5 Waste Management (EHS-WA)

PurposeIn enterprises of all kinds, substances and objects accumulate that can no longer be used in the production process and that must be disposed of as waste.Disposal in this sense means either the recycling (recovery) or the disposal (dumping) of waste. Laws and regulations regulate disposal and must be compliedwith by enterprises. Moreover, the disposal processes tie up resources (personnel, storage, containers, vehicles, and so on) and costs arise for the actualdisposal of waste that depend on the quantity and level of risk of the waste and on the situation on the disposal market.The SAP Waste Management component supports you in handling waste disposal processes, complying with national and international regulations and lawsthat are relevant for generation, transport, and disposal, and distributing costs proportionally among the departments within the enterprise that generated the waste.

IntegrationLike the SAP Environment, Health and Safety (EH&S ) component, Waste Management is also fully integrated into the SAP System. This integrationautomatically ensures that data is consistent in the business processes and other processes, that you do not need to enter data redundantly, and that data and thecorresponding documents are always up-to-date. You must have installed the following SAP components in order to be able to use all the Waste Managementfunctions and the corresponding integration:

Basic Data and Tools (EHS-BD) Product Safety (EHS-SAF) Dangerous Goods Management (EHS-DGP) Engineering change management Classification system Document management system (DMS) Materials management

SAP Warehouse Management Batch management Controlling Financial Accounting

All integration objects (for example, cost centers, materials, vendors, contracts, and storage locations) must be available in the system on whichyou installed Waste Management. This means that all the SAP components required must have been installed and the corresponding masterdata exists in this system.

In many cases, waste generators or waste disposers must also take into account the regulations and laws governing hazardous substances and dangerous goods,and industrial hygiene and safety and occupational health, alongside waste law. If this is the case in your enterprise, you should have installed all the SAP EH&Scomponents.

SAP EH&S Component Supports Compliance withWaste Management Waste law

Hazardous Substance Management and Product Safety Hazardous substance law

Dangerous Goods Management Dangerous goods law

Industrial Hygiene and Safety Industrial hygiene and safety

Occupational Health Occupational health

Some functions in Waste Management are also used by other SAP components, such as the SAP Waste Disposal Industry component of the SAP forUtilities Industry Business Solution.


Page 6 of 9

FeaturesWaste Management consists of the following SAP components: Basic data

In this SAP component, you can, among other things, enter all the data that is required for describing waste, for example from a logistics, physical-chemical,or legal point of view. Functions from the SAP components Materials Management , Basic Data and Tools , and Dangerous Goods Management are usedin this process.

Master dataIn this SAP component, you can, among other things, enter all the data for waste generators (such as points of generation), waste disposers, wastetransporters, authorities, and waste approvals. Furthermore, you can link waste generators, waste transporters, and waste disposers to wastes and specifypossible disposal channels.

Disposal processingIn this SAP component, you can enter waste quantities and trigger further disposal processing. Links to numerous SAP components are available for this, sothat you can, for example, post waste directly to inventory management from Waste Management and trigger purchase orders for disposal.

Disposal documentsIn this SAP component, you can create, print, and manage various disposal documents, such as German waste manifests or US hazardous wastemanifests. At the same time you can, for example, also monitor the return leg of the disposal document.

ReportingIn this SAP component, you can create various reports, such as waste life-cycle analyses.

You can use Customizing to flexibly adapt the Waste Management interface to suit your needs. You can thus hide fields, screens, and functions that you do notrequire and also add new ones.

This documentation only describes the SAP standard system. If you hide or change fields, screens, or functions in the SAP standard systemusing Customizing, this can lead to processes, functions, and procedures described in this documentation no longer exactly representing thesituation in your system.

1.6 Occupational Health (EHS-HEA)

PurposeThis component supports general employee occupational healthcare in your enterprise, as well as the planning and execution of special health surveillanceprotocols.Special surveillance is required for those persons who may be exposed to certain influences of a chemical, physical, or biological nature at their workplace, orwho perform activities that pose a health hazard. Health surveillance protocols can also include vaccinations or as in the United States random drug tests.Occupational Health comprises the following components: Basic data

This component enables you to specify the data that you require for managing the occupational health protocols used in your enterprise. This includes definingand assigning examinations, health surveillance protocols, trigger levels, and so on.You can use question catalog and questionnaire functions to create occupational health questionnaires. The data required to compile questionnaires is createdand managed in the question catalog. Questionnaires can be completed online in the system, or be printed out and scanned into the system again once theyhave been completed.

Schedule planningThis component enables you to determine which persons need to be registered for health surveillance protocols. You can also open medical services andplan the appropriate appointments for each of them.

Medical serviceYou use this component to enter and manage all the necessary examination data, such as diagnoses, examination results, work restrictions for healthreasons, and so on. You can also import the results of medical tests from external systems. And occupational health questionnaires are also completed in themedical service component.You can access and edit all the data on the case history of a person, as well as the data on consultations and follow-up activities (medical measures).

ReportingThis component is used for statistical evaluations of the data.

Injury/illness logThis component enables you to enter and manage data in the SAP system for any in-company medical treatment. This includes first aid in the event ofaccidents or minor injuries, treatment of old injuries, or treatment of persons who feel unwell.

Integration You must have installed the following SAP components in order to be able to use all the Occupational Health functions:

Personnel AdministrationYou require master data from the Personnel Administration component such as name, first name, date of birth, and personnel number (for the UnitedStates, you also need the social security number) in order to use employee data.

Organizational ManagementThe system uses organizational units (object types) from Organizational Management to assign agents to persons in the basic data component. Youmust therefore make sure that positions, jobs, and tasks are created there.

RecruitmentYou need master data from Recruitment such as name and first name in order to use applicant data.

SAP Business PartnerYou need master data from the Business Partner component such as name and first name in order to use data for external persons (for example,customers).

The following Occupational Health functions are for employees only: Automatic assignment of persons to health surveillance protocols


Page 7 of 9

Standard reporting in Occupational Health Simultaneous assignment of several persons to a health center Daily list and overview of medical service examinations in schedule planning

You must have installed the following Environment, Health and Safety (EH&S) components in order to be able to use all the Occupational Health functions: Industrial Hygiene and Safety

The system settings for agent-relevant data are made in the Industrial Hygiene and Safety (EHS-IHS) component. For more information, see theImplementation Guide (IMG) for Occupational Health .If you are using Industrial Hygiene and Safety , you can also transfer entries from the injury/illness log to the incident/accident log.

Basic Data and ToolsThe agents are defined in specification management . For more information, see the IMG for Occupational Health .

Industrial Hygiene and Safety (EHS-IHS)

PurposeThis component supports you with the following tasks :

Organization of industrial hygiene and safety within the company, based on freely-definable work areas Defining and managing industrial hygiene and safety measures Entering and managing agent data Creating risk assessments Planning, performing, and evaluating measurements Recording and processing accidents and minor injuries Creating, shipping, and archiving of reports such as standard operating procedures (SOPs) and accident reports

Implementation ConsiderationsTo be able to use the Industrial Hygiene and Safety (EHS-IHS) component, you must also have installed the SAP EH&S Basic Data and Tools (EHS-BD)component and processed its Customizing.

Integration

With Other SAP EH&S Components

Function Required Component or Function NecessaryEditing agents Specification management (EHS-BD-SPE)Storing phrase sets Phrase management (EHS-BD-PHR)

Entering language-dependent data in languages from several code pages (forexample, phrases or work area descriptions)

EH&S Native Language Support ( Basic Data and Tools )

Creating, shipping, and archiving of reports Report definition (EHS-BD-RDF)Report information system (EHS-SAF-RIS)Report shipping (EHS-SAF-RSH)

Transferring data from the injury/illness log to the incident/accident log Injury/illness log (EHS-HEA-IIL)Assignment of medical services Medical service (EHS-HEA-SRV)

With Other SAP Components

Function Required Component NecessaryLink between the work area and other objects in Logistics (such as work center,functional location)

Plant Maintenance (PM)Materials Management (MM)

Specifying safety measures and materials as agents Materials Management (MM)Organizational Management (PA-OS)

Including the work area in the organizational structure of your enterprise Organizational Management (PA-OS)Transfer of industrial hygiene and safety measures to maintenance processing orcustomer service as tasks

Plant Maintenance (PM)Customer Service (CS)

Access to HR master data in the incident/accident log or in industrial hygiene andsafety measures

Personnel Administration (PA-PA)

Access to external persons in the incident/accident log or in industrial hygiene andsafety measures

SAP Business Partner (CA-BP)

Access to applicants in the incident/accident log or in industrial hygiene and safetymeasures

Recruitment (PA-RC)

Reading of working time information for persons who have had accidents, and update ofabsence times

Time Management (PT)


Page 8 of 9

Roles for Environment, Health and Safety (EH&S) The following sections contain information about the single roles for the SAP Environment, Health and Safety (SAP EH&S) component.


Page 9 of 9