1.25” Rectilinear Downlight - USAI Lighting

Page 1

1.25” Rectilinear Downlight

USAI LIGHTING HEADQUARTERS1126 River RoadNew Windsor, NY 12553T: 845–565–8500 F: 845–561–[email protected]

USAI LIGHTING COLLABORATORY13 Crosby StreetNew York, NY [email protected]

MICRO DOWNLIGHT PERFORMANCE DATA

2 CELL 4 CELL 6 CELL 8 CELL 8W 13W 21W 27WColor Rendering Index 80+ 90+ 80+ 90+ 80+ 90+ 80+ 90+Source Lumens: 750 625 1475 1250 2200 1850 2900 2425 White Bevel Performance: Lumens Per Watt 68 57 76 64 72 61 72 61Delivered Lumens: 500 425 1000 825 1475 1250 1925 1625Black Bevel Performance: Lumens Per Watt 56 47 62 52 60 50 60 50Delivered Lumens: 400 350 825 700 1225 1025 1600 1350Color Consistency 2-Step MacAdam Ellipse*Performance data based on 3000K, 30° optic.

DELIVERED*PERFORMANCE:

Color Rendering Index:

Multiplier for Lumen

CORRELATED COLOR TEMPERATURE MULTIPLIER

Classic White

2700K 3000K 3500K 4000K

80+ 90+ 80+ 90+ 80+ 90+ 80+ 90+

0.93 0.79 1.00 0.84 1.00 0.84 1.07 0.93

Classic White

Micro™ for WoodWorks® - Vertical Slats - MDG-VS

© 2020. USAI, LLC. All rights reserved. All designs protected by copyright. Covered by US Patents: 9,671,091.

Patents pending. USAI, Micro and Classic White are registered trademarks of USAI, LLC.

Armstrong®, the Armstrong logo, BioAcoustic™, and WoodWorks® are trademarks of AWI Licensing LLC.

Revised 08/04/2020

FOR USE WITH THESE WOODWORKS® CEILINGS

WoodWorks® Grille 7091BD 7093BD 7094BO 7095BO 709 6BD 7097BO 7098BD 7099BD

WoodWorks® Grille Tegular 662912 663112

Specify fi xture part number. (All boxes must be fi lled in to correctly order)

HOW TO SPECIFY






Revised 08/04/2020Revised 06/30/2020

1.25” Rectilinear Downlight with Integral DriverMicro™ for WoodWorks® - Vertical Slats - MDG-VS

120V

MDG__ __

FAMILY LED COLOR CHOICES FIXTURE

NCVS

Housing

NCVSNew Construction Housing forWoodWorks®

VerticalSlats

Bevel FinishOptions

WH WhiteMatte

BLBlack Matte

BG Black Specular

SMSilver Matte

SG Silver Specular

BZBronze Specular

RGRose Gold Specular

Numberof Cells

022 Cell

044 Cell

066 Cell

088 Cell

INTEGRAL DRIVER HOUSING

CollarFinish

BL BlackMatte (provided standard)

WHWhite Matte

Classic White Light

MicroDownlightGrid-Mount

MDGMicroDownlightGrid-Mount

VoltageOptions

UNV120V-277V

BeamOptions

3535° Beam

5050° Beam

Dimming Driver Options

For use with UniversalVoltage 120V - 277V

No Additional ChargeD6E EldoLED 0-10V, 1% (provided standard)

D6F EldoLED 0-10V, 1%

D2 Thomas Research 0-10V, 10%(3)

D4H Lutron H Eco, 1%Fade (2)

D7EEldoLEDDALI, 1%

D8E EldoLED DMX, 1%

For use with 120V only

No Additional Charge

D19 HatchPhase 2-wire1% (2)

D3 Lutron HiLume 2-wire, 1%

CeilingType

GL917091BD WoodWorks®

Grille (1)

GL937093BD WoodWorks®

Grille

GL947094BO WoodWorks® Grille


GL967096BDWoodWorks® Grille



GL997099BDWoodWorks®

Grille

GT29662912 WoodWorks® Grille Tegular(1)

GT31663112WoodWorks® Grille Tegular

Size / WattageOptions

08H18W LED

13H113W LED

21H121W LED

27H127W LED

LED ColorTemperatureOptions

27KS2700K, 80+ CRI

27KH2700K, 90+ CRI

30KS 3000K, 80+ CRI

30KH3000K, 90+ CRI

35KS 3500K, 80+ CRI

35KH3500K, 90+ CRI

40KS 4000K, 80+ CRI

40KH4000K, 90+ CRI

2-Step MacAdamEllipse Color Consistency is standard for all

Grid MountingBars

UA2Universal Grid Mount channel bar, extendable 16” – 24” (provided standardwith all GL ceiling type options)

UA4Universal Grid Mount channel bar, extendable 30” – 48” (optional for all GL ceiling type options)

TA2Tegular Grid Mount channel bar, extendable 16” – 24” (provided standard with GT29 ceiling type option)

TA4Tegular Grid Mount channel bar, extendable 30” – 48” (provided standardwith GT31 ceiling type option)

Page 2

1 Not available with MDG06 or MDG08; use with MDG02 or MDG04 only2 Not available with MDG02 8W LED 3 Not available with MDG08 27W LED

Downlight Accessory Kit

Replacement Spacer Bracket and Yoke Kits for Compatible WoodWorks® Vertical Slat Ceilings

MDG-BYKIT-GL91 installs with Grille 7091MDG-BYKIT-GL93 installs with Grille 7093MDG-BYKIT-GL94 installs with Grille 7094MDG-BYKIT-GL95 installs with Grille 7095MDG-BYKIT-GL96 installs with Grille 7096MDG-BYKIT-GL97 installs with Grille 7097MDG-BYKIT-GL98 installs with Grille 7098MDG-BYKIT-GL99 installs with Grille 7099MDG-BYKIT-GL set of spacer bracket and yoke for all Grille types, one each – 8 totalMDG-BYKIT-GT29 installs with Grille Tegular 662912MDG-BYKIT-GT31 installs with Grille Tegular 663112MDG-BYKIT-GT set of spacer bracket and yoke for both Grille Tegular types, one each – 2 total

Collar Finish

HOW TO SPECIFY

Page 3



1. Specify fi xture part number. (All boxes must be fi lled in to correctly order)

USAI Power Supply

Must Be Specifi ed




Revised 08/04/2020

1.25” Rectilinear Downlight with Remote DriverMicro™ for WoodWorks® - Vertical Slats - MDG-VS

MDG__ __

FAMILY LED COLOR CHOICES FIXTURE

RMVS

Housing

RMVSRemote DriverHousing forWoodWorks® VerticalSlats

Bevel FinishOptions

WH WhiteMatte

BLBlack Matte

BG Black Specular

SMSilver Matte

SG Silver Specular

BZBronze Specular

RGRose Gold Specular

Numberof Cells

022 Cell

044 Cell

066 Cell

088 Cell

REMOTE DRIVER HOUSING

CollarFinish

BL BlackMatte (provided standard)

WHWhite Matte

Classic White Light

MicroDownlightGrid-Mount

MDGMicroDownlightGrid-Mount

BeamOptions

3535° Beam

5050° Beam

CeilingType *

GL917091BDWoodWorks® Grille (1)

GL937093BD WoodWorks® Grille




GL977097BOWoodWorks® Grille



GT29662912 WoodWorks Grille Tegular (1)

GT31663112Woodworks® Grille Tegular

Size / WattageOptions

08H18W LED

13H113W LED

21H121W LED

27H127W LED

LED ColorTemperatureOptions

27KS2700K, 80+ CRI

27KH2700K, 90+ CRI

30KS 3000K, 80+ CRI

30KH3000K, 90+ CRI

35KS 3500K, 80+ CRI

35KH3500K, 90+ CRI

40KS 4000K, 80+ CRI

40KH4000K, 90+ CRI

2-Step MacAdamEllipse Color Consistency is standard for all

Grid MountingBars

UA2Universal Grid Mount channel bar, extendable 16” – 24” (provided standard with all GL ceiling type options)

UA4Universal Grid Mount channel bar, extendable 30” – 48” (optional for all GL ceiling type options)



2. Specify Remote Power Supply

120V

RPAMicroRemote Power Supply

RPA

D2 0-10V dim, 10% D4H Lutron H ECO, 1% Fade (2) D6E EldoLED 0-10V, 1% D6F EldoLED 0-10V, 1%

D3 Lutron 2-wire, 1% D19 Phase 2-wire, 1% (2)2 Not available with LED 08H1

08H1 2 Cell 8W LED13H1 4 Cell 13W LED21H1 6 Cell 21W LED27H1 8 Cell 27W LED

08 Fixtures Max

03 Fixtures Max

02 Fixtures

01 Fixture

SINGLE CHANNEL REMOTE POWER SUPPLIES

D6E EldoLED 0-10V, 1% D6F EldoLED 0-10V, 1% D7E EldoLED DALI, 1% D8E EldoLED DMX, 1%

MULTI CHANNEL REMOTE POWER SUPPLIES

TypeCode

Remote Dimming Driver Typeand Dim Level

VoltageFixture Size andWattage Options

Fixture Quantity per Remote Power Supply

04 Fixtures MaxUNV120V - 277V

UNV120V - 277V

08H1 2 Cell 8W LED08H1 2 Cell 8W LED13H1 4 Cell 13W LED21H1 6 Cell 21W LED27H1 8 Cell 27W LED

Specify remote power supply part number in table below

Remote EmergencyOption

EM7Emergency Batteryprovides emergency power to one fi xture per power supply andrequires remote enclosure (by others) with a minimum size of14.5” L x 6.5” Wx 3” H.Emergency batteryis not available with2 cellMDG02-08H1 LED

1 Not available with MDG06 or MDG08; use with MDG02 or MDG04 only

Collar Finish

* For Ceiling Type changes in fi eld, see

Downlight Accessory Kit ordering table on Page 2

Page 4



INTEGRAL DRIVER HOUSING OPTIONS




Revised 08/04/2020

1.25” Rectilinear DownlightMicro™ for WoodWorks® - Vertical Slats - MDG-VS

13/4”

27/8”

151/4”

69/16”

69/16”

313/16”

NCVS-GT New Construction Housing Option for WoodWorks® Grille Tegular Vertical Slats

23/16”27/8”

151/4”

69/16”

69/16”

23/16”

313/16”

NCVS-GL New Construction Housing Option for WoodWorks® Grille Vertical Slats

RMVS-GL Remote Driver Housing Option for WoodWorks® Grille Vertical Slats

13/4”

21/16”

Trim

69/16”

21/16”

CL68/16”

Page 5



REMOTE DRIVER HOUSING OPTIONS

RMVS-GT Remote Driver Housing Option for WoodWorks® Grille Tegular Vertical Slats




Revised 08/04/2020

23/16”

21/16”


Trim

69/16”

21/16”

CL69/16”

19/16”

BELOW CEILING APPEARANCE AND DIMENSIONS

Page 6






Revised 08/04/2020

BELOW CEILING DRAWINGS - Integration With Armstrong® WoodWorks® Ceilings

WoodWorks® Grille Vertical Slats/ Armstrong® PN: 7091BD Optional BioAcoustic™ Infi ll panel / Armstrong® PN: 6657


815/16”

WoodWorks® Grille Vertical Slats / Armstrong® PN: 7093BDOptional BioAcoustic™ Infi ll panel / Armstrong® PN: 6657

USAI Micro Housing: NCVS-GL91NOTE: This ceiling solution allows for 4-cell maximum Micro (MDG02, MDG04 only)

USAI Micro Housing: NCVS-GL93

6” Typ

35/8”

33/4”

133/16”

35/8”Expandable hanger bar

Use of BioAcoustic™ infi llpanel recommended

13/4”

2 Cell: 15/16” 4 Cell (max): 29/16”

Dowels and backersmust be avoided

815/16”

6” Typ

35/8”

43/4”

133/16”


Use of BioAcoustic™ infi ll panel recommended

13/4”

2 Cell: 15/16” 4 Cell: 29/16”6 Cell: 313/16” 8 Cell: 51/16”


3-5/8” clearance required above fi nished height of ceiling tees for NCVS-GL fi xture housing installation. When RMVS-GL remote driver housing is used, 2-7/16” clearance is required above fi nished height of ceiling tee.

3-5/8” clearance required above fi nished height of ceiling teesfor NCVS-GL fi xture housing installation. When RMVS-GLremote driver housing is used, 2-7/16” clearance is required above fi nished height of ceiling tee.


Page 7






Revised 08/04/2020

BELOW CEILING DRAWINGS - Integration With Armstrong® Woodworks® Ceilings

WoodWorks® Grille Vertical Slats / Armstrong® PN: 7094BOOptional BioAcoustic™ Infi ll panel / Armstrong® PN: 6657





815/16”

12” Typ

35/8”

23/4”

133/16”



2”


815/16”

815/16”

12” Typ

35/8”

33/4”

133/16”



2”


Backers mustbe avoided

Backers must be avoided




Page 8






Revised 08/04/2020


WoodWorks® Grille Vertical Slats / Armstrong® PN: 7096BD Optional BioAcoustic™ Infi ll panel / Armstrong® PN: 6657





815/16”

6” Typ

35/8”

43/4”

133/16”


Trim mounting bracket must straddle backer for 6 or 8 cell installations


2”



815/16”


12” Typ

35/8”

33/4”

133/16”


23/4”






Page 9






Revised 08/04/2020







815/16”

6” Typ

35/8”

43/4”

133/16”



23/4”


Backersand dowelsmustbe avoided

815/16”

6” Typ

35/8”

53/4”

133/16”

35/8”

Expandable hanger bar


23/4”


Dowels and backers mustbe avoided

35/8”




Page 10






Revised 08/04/2020

BELOW CEILING DRAWINGS - Integration With Armstrong WoodWorks® Ceilings

WoodWorks® Grille Tegular Vertical Slats / Armstrong® PN: 662912Optional BioAcoustic™ Infi ll panel / Armstrong® PN: 5823


WoodWorks® Grille Tegular Vertical Slats / Armstrong® PN: 663112Optional BioAcoustic™ Infi ll panel / Armstrong® PN: 5823

USAI Micro Housing: NCVS-GT29NOTE: This ceiling solution allows for 4-cell maximum Micro (MDG02, MDG04 only)

USAI Micro Housing: NCVS-GT31

151/4”

815/16”

21/2”

31/4”

133/16”

2 Cell: 15/16”4 Cell: 29/16”6 Cell: 313/16”8 Cell: 51/16”




11/2”

815/16”

71/2” Typ

21/2”

31/4”

133/16” 2 Cell: 15/16”4 Cell: 29/16”



Use of BioAcoustic™infi ll panel recommended

19/16”

4-1/8” clearance required above fi nished height of ceiling tees for NCVS-GT29 fi xture housing installation. When RMVS-GT29 remote driver housing is used, 3-7/16” clearance is required above fi nished height of ceiling tee.

4-1/8” clearance required above fi nished height of ceiling tees for NCVS-GT31 fi xture housing installation. When RMVS-GT31 remote driver housing is used, 3-7/16” clearance is required above fi nished height of ceiling tee.

MICRO FOR WOODWORKS® VERTICAL SLATS SPECIFICATIONS

Page 11



FIELD REPLACEABLE LED LIGHT ENGINEis serviceable through the aperture with a Phillips screwdriver. All USAI Lighting light engines feature industry-leading color consistency.

MOUNTINGUSAI Lighting Micro light fi xtures for WoodWorks® Vertical Slats are specifi cally designed for use with WoodWorks® ceilings by Armstrong Ceiling Solutions. USAI fi xture housings are provided with patent-pending spacers, trim yoke suspension and mounting bars. Mounting bars are required to install the light fi xture and are not optional. Finished installations are seismically rated. Consult local codes for independent tie-ins.

INFILL PANELBioAcoustic™ Infi ll panel accessory is optionally available from Armstrong Ceiling Solutions to complete the installation. See integration page drawings for specifi c infi ll product part number for each ceiling type. USAI Lighting provides a cutout template for each light fi xture to ensure the material is cut to the correct size to frame light fi xture aperture within ceiling panel.

FIELD REPLACEABLE INTEGRAL DRIVER Unless otherwise specifi ed, a 0-10V, 100%-1% solid state electronic constant current integral dimming driver with a high power factor is provided standard and sources 2mA. All integral dimming drivers are located within the fi xture housing and are serviceable from above the ceiling only. See installation instructions for details to access in specifi c Armstrong® WoodWorks® ceilings. Some on-time delay may be experienced depending on control system used. All dimming drivers comply with IEEE C62.41 surge protection.

REMOTE LOCATION DRIVERAll remote dimming driver options must be clearly specifi ed in the “RP” table. Remote power supplies require enclosures by others that meet local codes and must be located in an accessible service panel within 100ft of the light fi xture; see remote driver details for coordination of enclosure sizes. All dimming drivers comply with IEEE C62.41 surge protection.

REMOTE LOCATION EMERGENCY Remote emergency battery IOTA ILB-CP07 provides 200mA to one fi xture for 90 minutes. When used with multichannel power supplies, emergency battery supplies power to 1 fi xture only through channel 1. Remote power supplies with EM option require an enclosure with minimum size of 14.5”L x 6.5”W x 3”H by others that meets local codes. Battery is not available with 08H1 LED.




Revised 08/04/2020


Requirements and Wiring Diagrams forMDG02 MWG02

Remote Power Supply Dimming Option Wire Gauge Required* (by others) UNV-D6E EldoLED 0-10V, 1% UNV-D6F EldoLED 0-10V, 1% UNV-D7E EldoLED DALI, 1% UNV-D8E EldoLED DMX, 1%

If you want to connect 8 fi xtures maximum per power supply select from the following options:

RPRP2REMOTEREMOTEPOWEPOWERSUPPLYSUPPLY

-

A

+

INPUT WIREINPUT WIRES

-+

USE FOR WIRING FIXTURESUSE FOR WIRING FIXTURESMDF0MDF02M2M DP02DP02MDF0MDF04M4M DP04DP04MDF0MDF06M6M DP06DP06MDF0MDF08M8M DP08DP08

FIXTURFIXTURE

SEE DIMMING COMPSEE DIMMING COMPATIBILITATIBILITYSHEET FOR SHEET FOR DETAILDETAILS

SEE DIMMING COMPSEE DIMMING COMPATIBILITATIBILITYSHEET FOR SHEET FOR DETAILDETAILS

B

USE ONLY FOR WIRING FIXTURESUSE ONLY FOR WIRING FIXTURESMDF0MDF02MDP0MDP02(2) FIXTURES IN SERIES(2) FIXTURES IN SERIES


FIXTURE FIXTURE 1

+


-+

- FIXTURE FIXTURE 2

-+

If you want to connect 1-2 fi xtures maximum per power supply select from the following options:

Remote Power Supply Dimming Option Wire Gauge Required* (by others) UNV-D2 0-10V dim, 10% 14/12 5.75” W x 2.625” L x 2” H UNV-D6E EldoLED 0-10V, 1% UNV-D6F EldoLED 0-10V, 1% 120V-D3 Lutron 2-wire phase, 1% 14/12 6.25” W x 4” L x 2” H

* Wire gauge 14/12 = Maximum distance from light fi xture to remote power supply is 100’ using 12 gauge wire, 50’ using 14 gauge wire. * Wire gauge 18/16 = Maximum distance from light fi xture to remote power supply is 100’ using 16 gauge wire, 50’ using 18 gauge wire.

SEE DIMMINGCOMPATIBILTY

SHEETS FOR DETAILS

SEE DIMMINGCOMPATIBILTY

SHEETS FOR DETAILS

HOMERUN SERIES

2-Cell Micro Remote Power Supply Requirements and Wiring Diagrams2-Cell can be wired in homeruns (wiring diagram A) or in series pairs (wiring diagram B).

18/16 10.375” W x 4” L x 2” H

18/16 6.25” W x 4” L x 2” H

RPA-08-08H1

RPA-01-08H1RPA-02-08H1

RPAREMOTEPOWERSUPPLY


Minimum Enclosure Size Required

Minimum Enclosure Size Required

MICRO WOODWORKS® VERTICAL SLATS SPECIFICATIONS (continued)

Page 12






Revised 08/04/2020


Requirements and Wiring Diagrams for MDG04 MWG04 MDG06 MWG06 MDG08 MWG08

If you want to connect 3-4 fi xtures maximum per power supply select from the following options:


-

A

+


-+

USE FOR WIRING FIXTURESUSE FOR WIRING FIXTURESMDF0MDF02M2M DP02DP02MDF0MDF04M4M DP04DP04MDF0MDF06M6M DP06DP06MDF0MDF08M8M DP08DP08

FIXTURFIXTURE

SEE DIMMING COMPSEE DIMMING COMPATIBILITATIBILITYSHEET FOR SHEET FOR DETAILDETAILSSEE DIMMING

COMPATIBILTY SHEETS

FOR DETAILS

4, 6, and 8-Cell Micro Remote Power Supply Requirements and Wiring DiagramsMust be wired in homeruns per wiring diagram “A” below.

HOMERUN


Remote Power Supply Dimming Option Wire Gauge Required* RP Only RP with EM Option** UNV-D6E EldoLED 0-10V, 1% UNV-D6F EldoLED 0-10V, 1% UNV-D7E EldoLED DALI, 1% UNV-D8E EldoLED DMX, 1%

18/16 10.375” W x 4” L x 2” H 14.5" W x 6.5" L x 3" H

Minimum Enclosure Size Required (by others)

RPA-04-13H1RPA-04-21H1RPA-03-27H1

If you want to connect 1 fi xture maximum per power supply select from the following options:

* Wire gauge 14/12 = Maximum distance from light fi xture to remote power supply is 100’ using 12 gauge wire, 50’ using 14 gauge wire. * Wire gauge 18/16 = Maximum distance from light fi xture to remote power supply is 100’ using 16 gauge wire, 50’ using 18 gauge wire. ** Emergency battery remote power supplies cannot be located any more than 50 feet from light fi xture.

Remote Power Supply Dimming Option Wire Gauge Required* RP Only RP with EM Option** UNV-D2 0-10V dim, 10% 14/12 7” W x 2.625” L x 2” H UNV-D4H Lutron H ECO, 1% Fade 14/12 6.25” W x 4” L x 2” H UNV-D6E EldoLED 0-10V, 1% UNV-D6F EldoLED 0-10V, 1% 120V-D3 Lutron 2-wire phase, 1% 14/12 6.25” W x 4” L x 2” H 120V-D19 Hatch 2-wire phase, 1% 14/12 5.75” W X 2.625” L X 2” H

18/16 6.25” W x 4” L x 2” H 14.5" W x.5" L x 3" H

Minimum Enclosure Size Required (by others)

RPA-01-13H1RPA-01-21H1RPA-01-27H1

FIXTURE WEIGHT Integral Driver housings with Trim and UA2 or TA2 mounting bars: MDG02-VS MDG04-VS MDG06-VS MDG08-VS 5.63 lbs 5.75 lbs 5.82 lbs 5.94 lbs

Remote Driver housings with Trim and UA2 or TA2 mounting bars (does not include remote power supply weight): MDG02-VS MDG04-VS MDG06-VS MDG08-VS 3.5 lbs 3.63 lbs 3.69 lbs 3.82 lbs

UA4 or TA4 mounting bars add an additional 0.5 lbs to the weights listed above.

WARRANTYBased on IESNA LM80-2008, Micro has a 50,000 hour rated life at 70% lumen maintenance (L70). USAI Lighting Warranty covers replacement parts for 5 years from date of shipment. Ambient temperatures at fi xture location should not exceed 40°C during normal operation.

LISTINGS Dry/Damp location. NRTL/CSA-US tested to UL standards. IBEW union made.

NOTES• Not for use in corrosive environment• Use of pressure washer voids warranty

PHOTOMETRICS Consult factory or website for IES fi les. Tested in accordance with IESNA LM79.

Documents

1.25” Rectilinear Downlight - USAI Lighting