46
LASHINGS

1.2.1 b lashings

Embed Size (px)

Citation preview

Page 1: 1.2.1 b lashings

LASHINGS

Page 2: 1.2.1 b lashings

Objectives

• To be able to correctly tie different type of lashings taught in this lesson

• To be able to apply these lashings where necessary

Page 3: 1.2.1 b lashings

Scope• Introduction

• Round Lashing

• Square Lashing

• Shear Lashing

• Diagonal Lashing

• Practice

• Conclusion

Page 4: 1.2.1 b lashings

TYPES OF LASHING

Page 5: 1.2.1 b lashings

ROUND LASHING

• Round Lashing is used to tie two parallel poles together side by side.

Page 6: 1.2.1 b lashings

Method of tying

Clove Hitch

Page 7: 1.2.1 b lashings

Method of tying

Make rounds and tighten

Page 8: 1.2.1 b lashings

Method of tying

End with Clove hitch

Page 9: 1.2.1 b lashings

Practice!

Page 10: 1.2.1 b lashings

SQUARE LASHING• Square Lashing is used

to tie two poles together at an angle of 90º. E.g. To construct a ladder, table or improvised raft.

• When done properly it will hold together even during the most vigorous of activities.

Page 11: 1.2.1 b lashings

Method of tying

Clove Hitch

Page 12: 1.2.1 b lashings

Method of tying

Twist the excess

end

Page 13: 1.2.1 b lashings

Method of tying

Guide the rope inside of the 1st

spar

Page 14: 1.2.1 b lashings

Method of tying

On the 2nd spar, guide the rope

outside

Page 15: 1.2.1 b lashings

Method of tying

Repeat the inside-outside method for at

least 3 rounds

Page 16: 1.2.1 b lashings

Method of tying

Repeat the steps for at least 3

rounds

Repeat the inside-outside method for at

least 3 rounds

Page 17: 1.2.1 b lashings

Method of tying

Guide the rope horizontally -

Frapping

Page 18: 1.2.1 b lashings

Method of tying

Pull as tight as possible, then make another round

Page 19: 1.2.1 b lashings

Method of tying

Frap at least 3 rounds, thin rope requires at least 4-5

rounds

Page 20: 1.2.1 b lashings

Method of tying

Frap at least 3 rounds, thin rope requires at least 4-5

rounds

Page 21: 1.2.1 b lashings

Method of tying

Finish the frapping by tying a half hitch and tighten on the pole

above

Page 22: 1.2.1 b lashings

Practice!

Page 23: 1.2.1 b lashings

SHEAR LASHING

•The sheer lashing is to bring together three spars to form a tripod

Page 24: 1.2.1 b lashings

Method of tying

Clove Hitch

Page 25: 1.2.1 b lashings

Method of tying

Wrap both pole with simple lashing

Page 26: 1.2.1 b lashings

Method of tying

Wrap both pole with simple lashing

Page 27: 1.2.1 b lashings

Method of tying

Wrap the lashing with 2-3 tight frapping turns

Page 28: 1.2.1 b lashings

Method of tyingEnd with tight clove hitch

Page 29: 1.2.1 b lashings

Practice!

Page 30: 1.2.1 b lashings

DIAGONAL LASHING

• The diagonal lashing is used to lash two spars together. Unlike the square lashing which works for right angle crossings, the diagonal lashing secures poles crossing each other at a variety of angles.

Page 31: 1.2.1 b lashings

Method of tying

Page 32: 1.2.1 b lashings

Method of tying

Page 33: 1.2.1 b lashings

Method of tying

Timber Hitch

Page 34: 1.2.1 b lashings

Method of tying

Timber Hitch

Page 35: 1.2.1 b lashings

Method of tying

Wrap at least 3 rounds

Page 36: 1.2.1 b lashings

Method of tying

Same goes to the other side

Page 37: 1.2.1 b lashings

Method of tying

Follow

Page 38: 1.2.1 b lashings

Method of tying

Follow and tighten

Page 39: 1.2.1 b lashings

Method of tying

Follow and tighten

Page 40: 1.2.1 b lashings

Method of tying

3-4 rounds and tighten

Page 41: 1.2.1 b lashings

Method of tying

Page 42: 1.2.1 b lashings

Method of tying

1 round on the top pole

Page 43: 1.2.1 b lashings

Method of tying

End with Clove hitch and tighten

Page 44: 1.2.1 b lashings

Practice!

Page 45: 1.2.1 b lashings

What you can build!

Page 46: 1.2.1 b lashings

ConclusionLashing is a very important skill that can be applied in outdoor pioneering, making it an essential part of camp craft.