118757626 LMT for RNC Huawei

8/12/2019 118757626 LMT for RNC Huawei

1/359

RNC

V100R012

LMT User Guide

Issue 01

Date 2009-12-25

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.


2/359

Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. For any

assistance, please contact our local office or company headquarters.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website: http://www.huawei.com

Email: [email protected]

Copyright Huawei Technologies Co., Ltd. 2009. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means without prior written

consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are the property of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and the

customer. All or part of the products, services and features described in this document may not be within the

purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,

and recommendations in this document are provided "AS IS" without warranties, guarantees or representations

of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, andrecommendations in this document do not constitute the warranty of any kind, express or implied.

Huawei Proprietary and Confidential

http://www.huawei.com/


3/359

Contents

About This Document.....................................................................................................................1

1 Changesin RNC LMT User Guide.........................................................................................1-1

2 Introduction to the RNC LMT.................................................................................................2-1

2.1 Definitions of the LMT...................................................................................................................................2-2

2.2 Functions of the RNC LMT............................................................................................................................2-2

2.3 Networking of the RNC OM System..............................................................................................................2-2

2.4 Computer Requirements of the LMT..............................................................................................................2-3

3 Subsystems of the LMT Application......................................................................................3-1

3.1 Local Maintenance Terminal of RNC.............................................................................................................3-2

3.2 FTP Client of RNC LMT................................................................................................................................3-4

3.3 Trace Viewer of RNC LMT............................................................................................................................3-5

3.4 Monitor Viewer of RNC LMT........................................................................................................................3-6

3.5 Performance Browser Tool of RNC LMT......................................................................................................3-7

3.6 Convert Management System of RNC LMT..................................................................................................3-8

4 Installing the RNC LMT Application....................................................................................4-1

5 Getting Started with the RNC LMT.......................................................................................5-1

5.1 Setting theIP Address of the RNC LMT PC..................................................................................................5-3

5.2 Connecting the RNC LMT to the BAM..........................................................................................................5-5

5.3 Starting the Local Maintenance Terminal of the RNC....................................................................................5-6

5.4 Setting theProperties of the RNC Local Maintenance Terminal..................................................................5-10

5.5 Configuring the Identity Certificate..............................................................................................................5-11

5.6 Setting the Office Information on the RNC LMT.........................................................................................5-13

5.7 Locking the Local Maintenance Terminal of the RNC.................................................................................5-17

5.8 Unlocking the Local Maintenance Terminal of the RNC.............................................................................5-18

5.9 Exiting the Local Maintenance Terminal of the RNC..................................................................................5-18

6 Managing Authorities for RNC Management......................................................................6-1

6.1 Concepts of RNC LMT Authority Management.............................................................................................6-2

6.1.1 Principles of RNC LMT Authority Management..................................................................................6-2

6.1.2 RNC Operator Password .......................................................................................................................6-2

6.1.3 RNC Command Groups.........................................................................................................................6-3

6.1.4 RNC Users..............................................................................................................................................6-4

RNC

LMT User Guide Contents

Issue 01 (2009-12-25) Huawei Proprietary and Confidential


i


4/359

6.1.5 RNC Operator Authorities.....................................................................................................................6-4

6.1.6 RNC Operation Time Limits..................................................................................................................6-5

6.2 Managing RNC Operators...............................................................................................................................6-6

6.2.1 Defining Policies for Login Passwords..................................................................................................6-7

6.2.2 Adding an RNC External Operator Account..........................................................................................6-7

6.2.3 Modifying the Properties of an RNC External Operator Account.........................................................6-9

6.2.4 Deletingan RNC External Operator Account......................................................................................6-11

6.2.5 Changing the Password of the RNC Active Operator Account...........................................................6-12

6.3 Managing RNC Command Groups...............................................................................................................6-13

6.3.1 Querying RNC Command Groups.......................................................................................................6-13

6.3.2 Renaming an RNC Command Group...................................................................................................6-13

6.3.3 Changing Commands in an RNC Command Group............................................................................6-14

7 Running RNC MML Commands............................................................................................7-1

7.1 Definitions ofRNC MML Commands............................................................................................................7-3

7.1.1 Introduction to RNC MML Commands.................................................................................................7-3

7.1.2 Introduction to the RNC MML Client....................................................................................................7-5

7.1.3 RNCData Configuration Right Management........................................................................................7-6

7.1.4 RNCData Configuration Mode.............................................................................................................7-7

7.1.5 RNCData Configuration Rollback........................................................................................................7-9

7.1.6 RNCData Consistency Check.............................................................................................................7-10

7.2 Starting the RNC MML Client......................................................................................................................7-10

7.3 Running aSingle RNC MML Command......................................................................................................7-11

7.4 Batch Running RNC MML Commands........................................................................................................7-127.5 SwitchingRNC Subracks to the Online Mode..............................................................................................7-14

7.6 SwitchingRNC Subracks to the Offline Mode.............................................................................................7-15

7.7 Checking Data Configuration Mode.............................................................................................................7-16

7.8 Viewing the Ownership of Data Configuration Right..................................................................................7-16

7.9 Obtaining the Ownership of Data Configuration Right................................................................................7-17

7.10 Releasing the Data Configuration Right.....................................................................................................7-18

7.11 Undoing/Redoing a Single RNC Data Configuration Action.....................................................................7-19

7.12 Undoing/Redoing Multiple Data Configuration Actions............................................................................7-19

8 Managing the RNC License..................................................................................................... 8-18.1 Basic Concepts of the RNC License...............................................................................................................8-2

8.1.1 License File............................................................................................................................................8-2

8.1.2 License Control for Multiple Operators.................................................................................................8-3

8.1.3 License Validation Mechanism..............................................................................................................8-5

8.2 Activating theRNC License...........................................................................................................................8-7

8.2.1 Obtaining ESN Information from the RNC..........................................................................................8-7

8.2.2 Uploading the RNC License File to the BAM.......................................................................................8-8

8.2.3 Checking RNC Basic Information and Operator Information...............................................................8-9

8.2.4 Activating and Verifying the License..................................................................................................8-10

8.3 Reallocating the RNC License......................................................................................................................8-11

Contents

RNC

LMT User Guide

ii Huawei Proprietary and Confidential


Issue 01 (2009-12-25)


5/359

8.4 Checking RNC Current User Number/Throughput......................................................................................8-12

9 Managing RNC Alarms.............................................................................................................9-1

9.1 Definitions of RNC Alarm Management........................................................................................................9-2

9.1.1 Introduction to RNC Alarm Management..............................................................................................9-29.1.2 Alarm Type............................................................................................................................................9-4

9.1.3 Alarm Severity.......................................................................................................................................9-5

9.1.4 RNC Event Alarm Types.......................................................................................................................9-5

9.1.5 RNC Alarm Box.....................................................................................................................................9-6

9.2 Setting RNC Alarm Logs................................................................................................................................9-6

9.2.1 Setting the Capacity and Time Limit of an RNC Alarm Log................................................................9-7

9.2.2 Querying the Capacity and Time Limit of an RNC Alarm Log.............................................................9-7

9.3 Filtering RNCAlarms.....................................................................................................................................9-7

9.3.1 Adding an RNC Alarm Shield...............................................................................................................9-8

9.3.2 Deleting an RNC Alarm Shield..............................................................................................................9-8

9.3.3 Querying RNC Alarm Shields................................................................................................................9-9

9.4 Masking RNCAlarms.....................................................................................................................................9-9

9.4.1 Setting the Mask Level of an RNC Alarm.............................................................................................9-9

9.4.2 Querying the Mask Level of an RNC Alarm.......................................................................................9-10

9.5 Monitoring RNC Alarms...............................................................................................................................9-10

9.5.1 Setting the Properties of the Alarm Browse Window..........................................................................9-11

9.5.2 Setting the Properties of RNC Fault Alarm Sounds.............................................................................9-12

9.5.3 Browsing Alarms..................................................................................................................................9-13

9.5.4 Querying RNC Alarm Logs.................................................................................................................9-15

9.5.5 Querying Alarm Handling Suggestions...............................................................................................9-17

9.5.6 Manually Setting a Cleared Alarm.......................................................................................................9-19

9.5.7 Saving the Information on an RNC Alarm...........................................................................................9-19

9.5.8 Setting the Preferences for Printing Alarms in Real Time...................................................................9-21

9.5.9 Manually Printing Alarms....................................................................................................................9-22

9.6 Managingthe Convert Management System................................................................................................9-23

9.6.1 Starting the Convert Management System...........................................................................................9-24

9.6.2 Setting the Parameters of the Convert Management System...............................................................9-24

9.6.3 Saving the Information in the Output Window....................................................................................9-259.6.4 Exiting the Convert Management System............................................................................................9-25

9.7 Operating the RNC Alarm Box.....................................................................................................................9-26

9.7.1 Connecting the RNC Alarm Box to the RNC LMT.............................................................................9-26

9.7.2 Resetting the RNC Alarm Box.............................................................................................................9-27

9.7.3 Stopping an RNC Alarm Sound...........................................................................................................9-28

9.7.4 Manually Turning Off an RNC Alarm Light.......................................................................................9-29

9.7.5 Querying the Version of the RNC Alarm Box.....................................................................................9-30

9.7.6 Querying the State of an RNC Alarm Light.........................................................................................9-31

9.7.7 Setting the Shield Severity of the RNC Alarm Box.............................................................................9-31

9.7.8 Querying the Mask Level of the RNC Alarm Box...............................................................................9-32

RNC




iii


6/359

10 Managing RNC Logs.............................................................................................................10-1

10.1 Definitions of RNC Log Management........................................................................................................10-3

10.1.1 RNC Log Types.................................................................................................................................10-3

10.1.2 RNC Log Management Authority......................................................................................................10-3

10.2 Setting the Time and Count Limits of the RNC Log..................................................................................10-3

10.3 Queryingthe Time and Count Limits of the RNC Log...............................................................................10-4

10.4 Queryingan RNC Operation Log...............................................................................................................10-4

10.5 Exporting an RNC Operation Log..............................................................................................................10-5

10.6 QueryingRNC Security Logs.....................................................................................................................10-6

10.7 Exporting an RNC Security Log.................................................................................................................10-7

10.8 Obtaining an RNC Running Log.................................................................................................................10-8

10.9 Collecting Fault Log Information...............................................................................................................10-9

11 Managing the RNC Equipment by Using the Device Panel and Display Panel.......11-1

11.1 Using the RNC Device Panel......................................................................................................................11-2

11.1.1 Introduction to the RNC Device Panel...............................................................................................11-2

11.1.2 Starting the RNC Device Panel..........................................................................................................11-3

11.1.3 Showing or Hiding the Legend on the RNC Device Panel................................................................11-4

11.1.4 Showing or Hiding the Failure Bar on the RNC Device Panel..........................................................11-6

11.1.5 Browsing the Status of an RNC Board...............................................................................................11-7

11.1.6 Querying the Detailed Information on the Status of an RNC Board..................................................11-8

11.1.7 Querying the CPU/DSP Usage of an RNC Board..............................................................................11-9

11.1.8 Switching over RNC Boards............................................................................................................11-10

11.2 Using the RNC Display Panel...................................................................................................................11-10

11.2.1 Introduction to the RNC Display Panel............................................................................................11-11

11.2.2 Starting the RNC Display Panel.......................................................................................................11-12

11.2.3 Viewing the Status of a WFMRc DSP.............................................................................................11-13

11.2.4 Viewing the Status of an RNC Board Port.......................................................................................11-13

11.2.5 Querying Alarms through a Board Alarm Light..............................................................................11-14

11.3 Querying theConfiguration Mode of a Subrack.......................................................................................11-16

11.4 Maintaining the WRSS Subrack...............................................................................................................11-16

12 RNC Message Tracing and Viewing..................................................................................12-1

12.1 Concepts of RNC Message Tracing Management......................................................................................12-412.1.1 Functions of RNC Message Tracing Management............................................................................12-4

12.1.2 Working Principles of RNC Message Tracing Management.............................................................12-4

12.1.3 Authority of RNC Message Tracing Management............................................................................12-5

12.2 Tracing Iu Interface Messages....................................................................................................................12-6

12.3 Tracing Iur Interface Messages...................................................................................................................12-9

12.4 Tracing Iub Interface Messages................................................................................................................12-12

12.5 Tracing Uu Interface Messages.................................................................................................................12-14

12.6 Tracing UE Messages................................................................................................................................12-17

12.7 Tracing IOS Messages..............................................................................................................................12-20

12.8 Tracing Cell Messages..............................................................................................................................12-21

Contents

RNC

LMT User Guide

iv Huawei Proprietary and Confidential


Issue 01 (2009-12-25)


7/359

12.9 Tracing REDIRECT Messages.................................................................................................................12-22

12.10 Tracing MNCDT Messages....................................................................................................................12-25

12.10.1 Tracing Messages of Missed Intra-Frequency Neighboring Cells.................................................12-26

12.10.2 Tracing Messages of Missed Inter-Frequency Neighboring Cells.................................................12-27

12.10.3 Tracing Messages of Missed Inter-RAT Neighboring Cells..........................................................12-28

12.11 TracingOS Messages..............................................................................................................................12-29

12.12 Tracing IP Messages...............................................................................................................................12-30

12.13 Tracing SCCP Messages.........................................................................................................................12-30

12.14 Tracing MTP3B Messages......................................................................................................................12-33

12.15 Tracing QAAL2 Messages......................................................................................................................12-35

12.16 Tracing SAAL Messages........................................................................................................................12-37

12.17 Tracing SCTP Messages.........................................................................................................................12-39

12.18 Tracing M3UA Messages........................................................................................................................12-42

12.19 Tracing Location Messages.....................................................................................................................12-43

12.20 Basic Operations of RNC Message Tracing...........................................................................................12-45

12.20.1 Browsing an RNC Traced Message Online...................................................................................12-45

12.20.2 Querying the Properties of the Tracing Task.................................................................................12-47

12.20.3 Viewing a Message Translation.....................................................................................................12-47

12.20.4 Saving an RNC Traced Message....................................................................................................12-47

12.20.5 Pausing an RNC Tracing Task.......................................................................................................12-49

12.20.6 Resuming an RNC Tracing Task...................................................................................................12-50

12.20.7 Stopping an RNC Tracing Task.....................................................................................................12-51

12.20.8 Browsing an RNC Traced Message Offline...................................................................................12-5112.20.9 Querying a Created RNC Tracing Task.........................................................................................12-55

12.20.10 Managing All Tracing Tasks........................................................................................................12-55

12.21 Parameter Reference for Tracing and Viewing RNC Messages.............................................................12-56

12.21.1 Parameter Reference for Iu Interface Tracing................................................................................12-57

12.21.2 Parameter Reference for Iur Interface Tracing...............................................................................12-58

12.21.3 Parameter Reference for Iub Interface Tracing..............................................................................12-60

12.21.4 Parameter Reference for Uu Interface Tracing..............................................................................12-61

12.21.5 Parameter Reference for UE Tracing.............................................................................................12-61

12.21.6 Parameter Reference for IOS Tracing............................................................................................12-62

12.21.7 Parameter Reference for Cell Tracing............................................................................................12-63

12.21.8 Parameter Reference for REDIRECT Tracing...............................................................................12-64

12.21.9 Parameter Reference for Intra-Frequency MNCDT Tracing.........................................................12-64

12.21.10 Parameter Reference for Inter-Frequency MNCDT Tracing.......................................................12-65

12.21.11 Parameter Reference for Inter-RAT MNCDT Tracing................................................................12-66

12.21.12 Parameter Reference for OS Tracing...........................................................................................12-68

12.21.13 Parameter Reference for IP Message Tracing..............................................................................12-69

12.21.14 Paramter Reference for Location Reporting Control...................................................................12-70

13 RNC Real-Time Performance Monitoring........................................................................13-1

13.1 Conceptsof RNC Real-Time Performance Monitoring..............................................................................13-2

RNC




v


8/359

13.1.1 Introduction to RNC Real-Time Performance Monitoring................................................................13-2

13.1.2 Working Principles of RNC Real-Time Performance Monitoring....................................................13-2

13.1.3 Authority of the RNC Real-Time Performance Monitoring..............................................................13-4

13.2 Monitoring the RNC CPU Usage................................................................................................................13-4

13.3 Monitoring the RNC Connection Performance...........................................................................................13-8

13.3.1 Monitoring P-CPICH Ec/No and RSCP.............................................................................................13-9

13.3.2 Monitoring the SIR Measurement Values of UL RLSs...................................................................13-11

13.3.3 Monitoring the SIR Error Values of UL RLSs................................................................................13-13

13.3.4 Monitoring DL Code TX Power......................................................................................................13-15

13.3.5 Monitoring the UE TX Power..........................................................................................................13-16

13.3.6 Monitoring UL Traffic.....................................................................................................................13-18

13.3.7 Monitoring DL Traffic.....................................................................................................................13-20

13.3.8 Monitoring UL Throughput and Bandwidth....................................................................................13-21

13.3.9 Monitoring DL Throughput and Bandwidth....................................................................................13-23

13.3.10 Monitoring Handover Delay..........................................................................................................13-24

13.3.11 Monitoring the BLER of the DL Transport Channel.....................................................................13-26

13.3.12 Monitoring the AMR Mode...........................................................................................................13-27

13.3.13 Monitoring the Enhanced Outer Loop Power Control...................................................................13-29

13.4 Monitoring the RNC Cell Performance....................................................................................................13-30

13.4.1 Monitoring Cell P-CPICH TX Power..............................................................................................13-32

13.4.2 Monitoring UL RX Total Wideband Power of a Cell......................................................................13-33

13.4.3 Monitoring DL Carrier TX Power of a Cell.....................................................................................13-35

13.4.4 Monitoring the Number of Cell Users..............................................................................................13-3713.4.5 Monitoring Node Synchronization...................................................................................................13-38

13.4.6 Monitoring the UL CAC..................................................................................................................13-40

13.4.7 Monitoring DL CAC........................................................................................................................13-42

13.4.8 Monitoring the Number of UL Equivalent Users.............................................................................13-43

13.4.9 Monitoring the Number of DL Equivalent Users.............................................................................13-44

13.4.10 Monitoring the Cell Code Tree......................................................................................................13-46

13.4.11 Monitoring the Minimum Required Power of the HS-DSCH........................................................13-47

13.4.12 Monitoring the Bit Rate Provided by the HS-DSCH.....................................................................13-49

13.4.13 Monitoring the Bit Rate Provided by the E-DCH..........................................................................13-50

13.4.14 Monitoring the Cell CE..................................................................................................................13-51

13.4.15 Monitoring the FDPCH SYMBOL................................................................................................13-52

13.5 Monitoring the RNC Link Performance....................................................................................................13-54

13.5.1 Monitoring the IMA Group Traffic..................................................................................................13-55

13.5.2 Monitoring the UNI Link Traffic.....................................................................................................13-57

13.5.3 Monitoring the Fractional ATM Link Traffic..................................................................................13-59

13.5.4 Monitoring the SAAL Link Traffic..................................................................................................13-61

13.5.5 Monitoring the IPoA PVC Traffic...................................................................................................13-62

13.5.6 Monitoring the QoS of an IP Path....................................................................................................13-64

13.5.7 Monitoring the AAL2 Path Traffic..................................................................................................13-66

Contents

RNC

LMT User Guide

vi Huawei Proprietary and Confidential


Issue 01 (2009-12-25)


9/359

13.5.8 Monitoring the FE/GE Traffic..........................................................................................................13-68

13.5.9 Monitoring the PPP Link Traffic.....................................................................................................13-70

13.5.10 Monitoring the MLPPP Group Traffic...........................................................................................13-72

13.5.11 Monitoring the SCTP Link Traffic.................................................................................................13-73

13.5.12 Monitoring the Performance of a QoS Queue................................................................................13-75

13.5.13 Monitoring the IP Path Traffic.......................................................................................................13-77

13.5.14 Monitoring the IP Performance......................................................................................................13-79

13.5.15 Monitoring OAM Traffic...............................................................................................................13-80

13.5.16 Monitoring the Logical Ports.........................................................................................................13-82

13.6 Monitoring PVC Traffic............................................................................................................................13-83

13.7 Basic RNC Real-Time Performance Monitoring Operations....................................................................13-85

13.7.1 Browsing the RNC Monitoring Results Online...............................................................................13-86

13.7.2 Switching the Display Mode............................................................................................................13-87

13.7.3 Setting the Default Display Mode....................................................................................................13-8813.7.4 Editing the Display Mode for the Chart...........................................................................................13-88

13.7.5 Saving RNC Monitoring Results......................................................................................................13-89

13.7.6 Pausing and Resuming an RNC Monitoring Task...........................................................................13-90

13.7.7 Adding an RNC CPU Monitoring Task...........................................................................................13-90

13.7.8 Deleting an RNC CPU Monitoring Task.........................................................................................13-91

13.7.9 Stopping an RNC Monitoring Task.................................................................................................13-91

13.7.10 Browsing RNC Monitoring Results Offline...................................................................................13-92

13.8 Parameter Reference for RNC Real-Time Performance Monitoring........................................................13-95

13.8.1 Parameter Reference for RNC CPU Usage Monitoring...................................................................13-95

13.8.2 Parameter Reference for Connection Performance Monitoring.......................................................13-96

13.8.3 Parameter Reference for Cell Performance Monitoring...................................................................13-97

13.8.4 Parameter Reference for Link Performance Monitoring..................................................................13-97

13.8.5 Parameter Reference for PVC Traffic Monitoring...........................................................................13-99

14 Using the RNC LMT Performance Browser Tool............................................................14-1

14.1 Introduction to RNC Performance Management.........................................................................................14-3

14.2 Starting the RNC LMT Performance Browser Tool...................................................................................14-4

14.3 Exiting the RNC LMT Performance Browser Tool....................................................................................14-4

14.4 Setting the Parameters of the RNC LMT Performance Browser Tool........................................................14-4

14.5 Downloading Performance Measurement Results......................................................................................14-6

14.6 Querying Performance Measurement Data.................................................................................................14-8

14.7 Filtering Performance Measurement Data..................................................................................................14-9

14.8 Exporting Performance Measurement Data..............................................................................................14-10

14.9 Browsing Description Files.......................................................................................................................14-11

15 Using the FTP Client of the RNC LMT..............................................................................15-1

15.1 Logging in to the FTP Server on the LMT FTP Client...............................................................................15-2

15.2 Uploading Data Files to the RNC FTP Server............................................................................................15-3

15.3 Downloading Data Files from the RNC FTP Server...................................................................................15-4

15.4 Setting the Encryption Mode of the RNC FTP Server................................................................................15-5

RNC




vii


10/359

15.5 Querying the Encryption Mode of the RNC FTP Server............................................................................15-5

15.6 Disconnecting the LMT FTP Client from the RNC FTP Server.................................................................15-5

Contents

RNC

LMT User Guide

viii Huawei Proprietary and Confidential


Issue 01 (2009-12-25)


11/359

Figures

Figure 2-1LMT networking structure..................................................................................................................2-3

Figure 3-1Main interface of the Local Maintenance Terminal...........................................................................3-2

Figure 3-2Main interface of the FTP Client........................................................................................................3-4

Figure 3-3Main interface of the Trace Viewer....................................................................................................3-6

Figure 3-4Main interface of the Monitor Viewer................................................................................................3-7

Figure 3-5Main interface of the Performance Browser Tool..............................................................................3-8

Figure 3-6Main interface of the Convert Management System..........................................................................3-9

Figure 4-1Selecting a setup language..................................................................................................................4-1

Figure 4-2Copyright notice....................................................................................................................... ..........4-2

Figure 4-3Selecting software components..........................................................................................................4-3

Figure 4-4Confirming installation.......................................................................................................................4-4

Figure 5-1Local Area Connection Properties dialog box....................................................................................5-4

Figure 5-2Internet Protocol (TCP/IP) Properties dialog box.............................................................................. 5-5

Figure 5-3Checking the icon of LMT Service Manager on the status bar..........................................................5-7Figure 5-4User Login dialog box........................................................................................................................5-7

Figure 5-5Office Management dialog box..........................................................................................................5-8

Figure 5-6Adding an office.................................................................................................................................5-8

Figure 5-7Office Management dialog box..........................................................................................................5-9

Figure 5-8User Login dialog box........................................................................................................................5-9

Figure 5-9Certificate Configuration dialog box................................................................................................5-12

Figure 5-10Open dialog box..............................................................................................................................5-13

Figure 5-11Office Management dialog box......................................................................................................5-14

Figure 5-12Adding an office.............................................................................................................................5-14

Figure 5-13Modifying an office........................................................................................................................5-15

Figure 5-14Open dialog box..............................................................................................................................5-16

Figure 5-15Adding an office.............................................................................................................................5-17

Figure 6-1Setting password policies................................................................................................................... 6-7

Figure 6-2Operator Management dialog box......................................................................................................6-8

Figure 6-3Modifying an operator......................................................................................................................6-10

Figure 6-4Operator Management dialog box....................................................................................................6-10

Figure 6-5Deleting an operator.........................................................................................................................6-11

Figure 6-6Change Password dialog box............................................................................................................6-12

Figure 6-7Setting the name of a command group.............................................................................................6-14

RNC

LMT User Guide Figures



ix


12/359

Figure 6-8Modifying a command group...........................................................................................................6-15

Figure 7-1MML client.........................................................................................................................................7-5

Figure 7-2RNC online data configuration...........................................................................................................7-7

Figure 7-3RNC offline data configuration..........................................................................................................7-8

Figure 7-4Immediate batch running of MML commands.................................................................................7-13

Figure 7-5Scheduled batch running of MML commands.................................................................................7-14

Figure 7-6Subrack data configuration mode.....................................................................................................7-16

Figure 7-7Data configuration user being NULL...............................................................................................7-17

Figure 7-8Data configuration user being admin................................................................................................7-17

Figure 7-9Data configuration right owned by admin........................................................................................7-18

Figure 8-1Activating the license of the primary operator...................................................................................8-4

Figure 8-2Activating the license of the secondary operator................................................................................8-4

Figure 8-3ESN in the returned message..............................................................................................................8-8

Figure 8-4Adding the basic information about the RNC....................................................................................8-9

Figure 8-5Adding the basic information about the primary operator..................................................................8-9

Figure 8-6ESN in the returned message............................................................................................................8-10

Figure 9-1Process of alarm management............................................................................................................9-3

Figure 9-2Alarm box...........................................................................................................................................9-3

Figure 9-3Process of driving the alarm box........................................................................................................9-4

Figure 9-4Alarm box...........................................................................................................................................9-6

Figure 9-5Alarm Browse window.....................................................................................................................9-11

Figure 9-6Customizing alarms..........................................................................................................................9-13

Figure 9-7Details of an alarm............................................................................................................................9-14Figure 9-8Querying an alarm log......................................................................................................................9-16

Figure 9-9Query Alarm Log window................................................................................................................9-16

Figure 9-10Details of an alarm..........................................................................................................................9-18

Figure 9-11Alarm online help...........................................................................................................................9-18

Figure 9-12Saving alarms.................................................................................................................................9-21

Figure 9-13Setting alarm real-time print...........................................................................................................9-22

Figure 9-14Printing alarms................................................................................................................................9-23

Figure 9-15Configuring the Convert Management System..............................................................................9-24

Figure 9-16Configuring the Convert Management System..............................................................................9-27

Figure 9-17Resetting alarm box........................................................................................................................9-28

Figure 9-18Alarmbox Control dialog box.........................................................................................................9-29

Figure 9-19Alarmbox Control dialog box.........................................................................................................9-30

Figure 9-20Setting the alarm shield severity.....................................................................................................9-32

Figure 9-21Querying alarm mask level.............................................................................................................9-33

Figure 10-1Server entry bar..............................................................................................................................10-6



Figure 11-1RNC device panel...........................................................................................................................11-3

Figure 11-2Navigation tree of the device panel................................................................................................11-4

Figures

RNC

LMT User Guide

x Huawei Proprietary and Confidential


Issue 01 (2009-12-25)


13/359

Figure 11-3Displaying the color legend............................................................................................................11-5

Figure 11-4Hiding the color legend..................................................................................................................11-5

Figure 11-5To show the failure bar, perform the following step:.....................................................................11-6

Figure 11-6Hiding the failure bar......................................................................................................................11-7

Figure 11-7Querying details of boards..............................................................................................................11-8

Figure 11-8Output interface of the CPU/DSP Usage window..........................................................................11-9

Figure 11-9RNC display panel........................................................................................................................11-11

Figure 11-10Edge of a subrack.......................................................................................................................11-12

Figure 11-11Information about the status of an optical port on the WLPU....................................................11-14

Figure 11-12Query The Alarm Information Of Alarm Lamp.........................................................................11-15

Figure 11-13Query The Alarm Information Of Alarm Lamp dialog box.......................................................11-15

Figure 11-14Configuration modes of subracks...............................................................................................11-16

Figure 12-1Working principles of the message tracing....................................................................................12-5

Figure 12-2 Setting the parameters for Iu interface tracing............................................................................12-7

Figure 12-3 Output of Iu interface tracing......................................................................................................12-8

Figure 12-4 Setting the parameters for Iur interface tracing...........................................................................12-10

Figure 12-5 Output of Iur interface tracing..................................................................................................12-11

Figure 12-6 Setting the parameters for Iub interface tracing........................................................................12-13

Figure 12-7 Output of Iub interface tracing.................................................................................................12-14

Figure 12-8Setting the parameters for Uu interface tracing.........................................................................12-15

Figure 12-9Output of Uu interface tracing...................................................................................................12-16

Figure 12-10Setting the parameters for UE tracing......................................................................................12-18

Figure 12-11Output of UE tracing.................................................................................................................12-19Figure 12-12 Setting the parameters for REDIRECT tracing .....................................................................12-23

Figure 12-13 Output of REDIRECT tracing................................................................................................12-24

Figure 12-14Savedialog box..........................................................................................................................12-24

Figure 12-15Missed intra-frequency neighboring cell tracing........................................................................12-26

Figure 12-16Missed inter-frequency neighboring cell tracing........................................................................12-27

Figure 12-17Missed inter-RAT neighboring cell tracing................................................................................12-28

Figure 12-18Setting the parameters for Iu interface tracing.........................................................................12-31

Figure 12-19 Output of SCCP tracing...........................................................................................................12-32


Figure 12-21 Output of MTP3B tracing........................................................................................................12-35


Figure 12-23 Output of SAAL tracing...........................................................................................................12-39


Figure 12-25 Output of SCTP tracing...........................................................................................................12-42

Figure 12-26 Message Browser window.........................................................................................................12-46

Figure 12-27 Save dialog box.........................................................................................................................12-49

Figure 12-28Pausing a tracing task.................................................................................................................12-50

Figure 12-29Resuming a tracing task..............................................................................................................12-50

Figure 12-30Stopping a tracing task...............................................................................................................12-51

RNC




xi


14/359

Figure 12-31Opening a file containing traced messages.................................................................................12-52

Figure 12-32Displaying traced messages........................................................................................................12-53

Figure 12-33 Message Browser window.........................................................................................................12-54

Figure 13-1CPU usage monitoring....................................................................................................................13-3

Figure 13-2Working principle of connection/cell/link performance monitoring..............................................13-3

Figure 13-3Add Tasks dialog box.....................................................................................................................13-5

Figure 13-4List tab page of the CPU Usage monitoring window.....................................................................13-6

Figure 13-5Chart tab page of the CPU Usage monitoring window..................................................................13-6

Figure 13-6Querying the properties of a CPU usage monitoring task..............................................................13-7

Figure 13-7Connection performance monitoring dialog box..........................................................................13-10

Figure 13-8Connection performance monitoring dialog box..........................................................................13-12

Figure 13-9Connection performance monitoringdialog box......................................................................13-14

Figure 13-10Connection performance monitoring dialog box........................................................................13-15










Figure 13-20Cell performance monitoring dialog box....................................................................................13-32Figure 13-21Output interface of cell P-CPICH TX power monitoring...........................................................13-33

Figure 13-22Cell performance monitoring dialog box....................................................................................13-34

Figure 13-23Output interface of UL RX total wideband power monitoring for a cell...................................13-35


Figure 13-25Output interface of DL TX carrier power monitoring for a cell.................................................13-37

Figure 13-26Cell performance monitoringdialog box................................................................................13-38


Figure 13-28Output interface of node synchronization monitoring................................................................13-40






Figure 13-34Output of the cell code tree usage in static view........................................................................13-47






Figures

RNC

LMT User Guide

xii Huawei Proprietary and Confidential


Issue 01 (2009-12-25)


15/359

Figure 13-40Link performance monitoring dialog box...................................................................................13-56

Figure 13-41Output interface of IMA group real-time traffic monitoring......................................................13-57


Figure 13-43Output interface of UNI link real-time traffic monitoring..........................................................13-59

Figure 13-44Link performance monitoringdialog box...............................................................................13-60


Figure 13-46Output interface of SAAL link real-time traffic monitoring......................................................13-62


Figure 13-48Output interface of IPoA PVC real-time traffic monitoring.......................................................13-64


Figure 13-50Output interface of IP path QoS monitoring..............................................................................13-66


Figure 13-52Output interface of AAL2 path real-time traffic monitoring......................................................13-68


Figure 13-54Output interface of FE/GE real-time traffic monitoring.............................................................13-70




Figure 13-58Output interface of SCTP link real-time traffic monitoring.......................................................13-75


Figure 13-60Output interface of QoS performance monitoring......................................................................13-77


Figure 13-62Output interface of IP path real-time traffic monitoring............................................................13-79Figure 13-63Link performance monitoring dialog box...................................................................................13-80



Figure 13-66PVC performance monitoring dialog box..................................................................................13-84

Figure 13-67Output interface of PVC real-time traffic monitoring................................................................13-85

Figure 13-68Adding CPU usage monitoring tasks..........................................................................................13-90

Figure 13-69Deleting the CPU usage monitoring tasks..................................................................................13-91

Figure 13-70Open dialog box..........................................................................................................................13-93

Figure 13-71Displaying monitoring results in a list........................................................................................13-94

Figure 13-72Displaying monitoring results in a chart.....................................................................................13-94

Figure 14-1Process of performance measurement............................................................................................14-3

Figure 14-2Select NE dialog box......................................................................................................................14-5

Figure 14-3NE Configuredialog box..............................................................................................................14-5

Figure 14-4Downloading the measurement results...........................................................................................14-7

Figure 14-5Auto Download Settings dialog box...............................................................................................14-7

Figure 14-6Add dialog box...............................................................................................................................14-8

Figure 14-7Querying performance measurement results..................................................................................14-9

Figure 14-8Filtering results.............................................................................................................................14-10

Figure 14-9Save dialog box............................................................................................................................14-11

RNC




xiii


16/359

Figure 14-10Browsing description files..........................................................................................................14-12

Figure 14-11Checking details.........................................................................................................................14-12

Figure 15-1Main interface of the FTP Client....................................................................................................15-2

Figures

RNC

LMT User Guide

xiv Huawei Proprietary and Confidential


Issue 01 (2009-12-25)


17/359

Tables

Table 2-1Hardware requirements........................................................................................................................2-4

Table 2-2Software requirements.........................................................................................................................2-4

Table 3-1Main interface of the Local Maintenance Terminal.............................................................................3-2

Table 3-2Online help of the Local Maintenance Terminal.................................................................................3-3

Table 3-3Main interface of the FTP Client.........................................................................................................3-4

Table 3-4Online help of the FTP Client..............................................................................................................3-5

Table 3-5Online help of the Trace Viewer..........................................................................................................3-6

Table 3-6Online help of the Monitor Viewer......................................................................................................3-7

Table 3-7Online help of the Performance Browser Tool....................................................................................3-8

Table 3-8Online help of the Convert Management System................................................................................3-9

Table 6-1Command groups.................................................................................................................................6-3

Table 6-2External operators of different levels...................................................................................................6-5

Table 6-3Examples of operation time limit settings............................................................................................6-6

Table 7-1Actions of the MML commands..........................................................................................................7-3Table 7-2Fields on the MML client.....................................................................................................................7-5

Table 7-3RNC offline commands........................................................................................................................7-8

Table 9-1Fault alarms and event alarms..............................................................................................................9-4

Table 9-2Alarm severity levels............................................................................................................................9-5

Table 9-3Display properties and setting methods.............................................................. ...............................9-12

Table 12-1Parameters on the input GUI..........................................................................................................12-65

Table 12-2Parameters on the output GUI........................................................................................................12-65





Table 14-1Parameters in the NE Configure dialog box....................................................................................14-6

Table 15-1Implementation method of encryption.................................................................... .........................15-3

RNC

LMT User Guide Tables



xv


18/359


19/359

About This Document

Purpose

This document describes the installation, functions, and interfaces of the RNC Local

Maintenance Terminal (LMT). It also provides instructions for performing basic OM operations.

Product Version

The following table lists the product version related to this document.

Product Name Product Model Product Version

RNC BSC6800 V100R012

Intended Audience

This document is intended for:

l Network operators

l Shift operators

l System engineers

l Field engineers

Organization

1 Changes in RNC LMT User Guide

This describes the changes in RNC LMT User Guide.

2 Introduction to the RNC LMT

This describes the LMT and its program group.

3 Subsystems of the LMT Application

This describes the subsystems of the LMT application.

RNC

LMT User Guide About This Document



1


20/359

4 Installing the RNC LMT Application

This describes how to install the RNC LMT application. It takes V100R011C00SPC100 as an

example.

5 Getting Started with the RNC LMT

This describes how to start, configure, use, and quit the LMT application. When running the

LMT application, ensure that the free space of the hard disk is no less than 1 GB.

6 Managing Authorities for RNC Management

This describes the basic concepts related to the management authorities and how to manage the

operators and the command groups.

7 Running RNC MML Commands

This describes how to run the RNC MML commands.

8 Managing the RNC License

This describes how to manage the RNC license, for example, activate and reallocate the RNC

license, check the quantity of current RNC operators, the traffic on the RNC, or the alarms related

to the RNC license.

9 Managing RNC Alarms

This describes how to manage RNC command groups.

10 Managing RNC Logs

This describes how to manage the RNC logs. The logs are saved in .txt and .log files.

11 Managing the RNC Equipment by Using the Device Panel and Display Panel

This describes how to manage the RNC equipment by using the device panel and display panel.

By performing this task, you can query the information about the boards, board ports, board

links, and board alarms in GUI mode.

12 RNC Message Tracing and Viewing

This describes how to manage the RNC traced messages. RNC message tracing is implemented

through menus. You can use the Trace Viewer to query the tracing data recorded in the files.

13 RNC Real-Time Performance Monitoring

This describes how to monitor RNC performance in real time.

14 Using the RNC LMT Performance Browser Tool

This describes how to start, configure, and exit the RNC LMT Performance Browser Tool.

15 Using the FTP Client of the RNC LMT

This describes how to use the FTP Client of the RNC LMT. By performing this task, you can

use and exit the FTP Client. You can also set and query the encryption mode of the FTP server.

Conventions

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Organization

RNC

LMT User Guide

2 Huawei Proprietary and Confidential


Issue 01 (2009-12-25)


21/359

Symbol Description

Indicates a hazard with a high level of risk, which if not

avoided,will result in death or serious injury.

Indicates a hazard with a medium or low level of risk, which

if not avoided, could result in minor or moderate injury.

Indicates a potentially hazardous situation, which if not

avoided,could result in equipment damage, data loss,

performance degradation, or unexpected results.

Indicates a tip that may help you solve a problem or save

time.

Provides additional information to emphasize or supplement

important points of the main text.

General Conventions

The general conventions that may be found in this document are defined as follows.

Convention Description

Times New Roman Normal paragraphs are in Times New Roman.

Boldface Names of files, directories, folders, and users are inboldface. For example, log in as user root.

Italic Book titles are in italics.

Courier New Examples of information displayed on the screen are in

Courier New.

Command Conventions

The command conventions that may be found in this document are defined as follows.


Boldface The keywords of a command line are in boldface.

Italic Command arguments are in italics.

[ ] Items (keywords or arguments) in brackets [ ] are optional.

{ x | y | ... } Optional items are grouped in braces and separated by

vertical bars. One item is selected.

[ x | y | ... ] Optional items are grouped in brackets and separated by

vertical bars. One item is selected or no item is selected.

RNC

LMT User Guide Organization



3


22/359


{ x | y | ... }* Optional items are grouped in braces and separated by

vertical bars. A minimum of one item or a maximum of all

items can be selected.

[ x | y | ... ]* Optional items are grouped in brackets and separated by

vertical bars. Several items or no item can be selected.

GUI Conventions

The GUI conventions that may be found in this document are defined as follows.


Boldface Buttons, menus, parameters, tabs, window, and dialog titles

are in boldface. For example, click OK.

> Multi-level menus are in boldfaceand separated by the ">"

signs. For example, choose File> Create> Folder.

Keyboard Operations

The keyboard operations that may be found in this document are defined as follows.

Format Description

Key Press the key. For example, press Enterand press Tab.

Key 1+Key 2 Press the keys concurrently. For example, pressing Ctrl+Alt

+Ameans the three keys should be pressed concurrently.

Key 1, Key 2 Press the keys in turn. For example, pressing Alt, Ameans

the two keys should be pressed in turn.

Mouse Operations

The mouse operations that may be found in this document are defined as follows.

Action Description

Click Select and release the primary mouse button without moving

the pointer.

Double-click Press the primary mouse button twice continuously and

quickly without moving the pointer.

Drag Press and hold the primary mouse button and move the

pointer to a certain position.

Organization

RNC

LMT User Guide

4 Huawei Proprietary and Confidential


Issue 01 (2009-12-25)


23/359

1Changes in RNC LMT User GuideThis describes the changes in RNC LMT User Guide.

01 (2009-12-25)

This is the field trial release.

Compared with issue 02 (2009-03-

Documents

118757626 LMT for RNC Huawei