10.6 Schedule of Accreditation Issue No: 2/ Issue Date: 5 ...gac.org.sa/uploads/cab_list/att_1/AC_10_6_Schedule_of... · Cations by IC ASTM 6919-09 Oxyhalides by IC APHA 4110 D Anions

Accreditation Procedures

GAC

10.6 Schedule of Accreditation

Issue No: 2/ Issue Date: 5 November 2017 Accreditation Manager: Hamza Khan

ACCREDITED

TESTING ISO/IEC 17025:2005

No. ATL 0038

Version: 2 Page 1 of 12

Date: 5 January 2016

Approved by: Brahim Houla

Testing Laboratory No. ATL 0038

is accredited by the GCC Accreditation Center (GAC) in accordance with the recognized International Standard ISO/IEC 17025:2005, “General requirements for the competence of testing and calibration laboratories”

SGS Inspections Services Saudi Arabia Ltd

Issue No: 2 Issue Date: 5 November 2017

Address:

SGS Building, Road 112 Cross 293, Support Industries, Jubail First Industrial Area, P.O. Box 725, Al Jubail - 31951, Saudi Arabia. Kingdom of Saudi Arabia

Contact: Dr Abdul Kader

Tel No: +966 13 340 00 44 Fax No: +966 13 342 02 12 Mobile : 00966 541200399

Email : [email protected] Web Address: www.sgs.com

Locations where testing activities covered by the above Accreditation Standard are undertaken

1 - Address: SGS Building, Road 112 Cross 293, Support Industries, Jubail First Industrial Area, P.O. Box 725, Al Jubail - 31951

For the following scope:

7. Chemical Testing: 7.81 Constituents of the environment 7.21 Miscellaneous petroleum products

mailto:[email protected]


GAC



ACCREDITED


No. ATL 0038




Scope details are as follows:

TEST CATEGORY ITEMS, MATERIALS

OR PRODUCTS TESTED SPECIFIC TESTS

OR PROPERTIES MEASURED SPECIFICATION, STANDARD METHOD

OR TECHNIQUE USED

Jubail Branch – Environment

Chemical testing (Environmental)

Water/Wastewater

pH APHA 4500 - H+B

Total Suspended solids APHA 2540 D

Total Dissolved Solids APHA 2540 C

Oil & Grease APHA 5520B

Dissolved Oxygen APHA 4500-O G

Electrical Conductivity APHA 2510 B

Salinity APHA 2520 B

Residual Chlorine APHA 4500 Cl G

Turbidity (NTU) APHA 2130 B

Total Alkalinity (as mg/l CaCO3) APHA 2320 B

Sulphide APHA 4500-S2- D

Cations by IC ASTM 6919-09

Oxyhalides by IC APHA 4110 D

Anions by IC APHA 4110 B

Cyanide APHA 4500-CN E

Total Kjeldahl Nitrogen APHA 4500 Norg B


GAC



ACCREDITED


No. ATL 0038




TEST CATEGORY ITEMS, MATERIALS

OR PRODUCTS TESTED SPECIFIC TESTS

OR PROPERTIES MEASURED SPECIFICATION, STANDARD METHOD

OR TECHNIQUE USED

Total Phenols APHA 5530 D

Silica APHA 4500-SiO2 D

Total Nitrogen ASTM D 5276-08

Total Organic Carbon APHA 5310 C

Metals by ICP-MS USEPA 200.8/APHA 3125 B

Metals by ICP-OES USEPA 200.7/APHA 3120 B

Semivolatile USEPA 3510C / 8270 C

TPH (C6-C9) USEPA 5021A / 8015 B

TPH (C10-C35) USEPA 3510 C / 8015 B

Contaminated Soil and Waste water

Metals by ICP-MS USEPA 3051 A/3052/6020 A

Metals by ICP-OES USEPA 3051 A/3052/6010 C

Volatile Organic Compounds USEPA 5021A / 8260 B

Contaminated Soil Semivolatile USEPA 3540C / 8270 C

TPH (C10-C35) USEPA 3540C / 8015 B

TPH USEPA 9071B

Soil Total Kjeldahl Nitrogen ASTM E258-67(2002)

Sodium Absorption Ratio (SAR) Calculation

TPH (C6-C9) USEPA 5021A / 8015 B


GAC



ACCREDITED


No. ATL 0038




Jubail Branch – OGC

Chemical Testing (OGC Scope)

Petroleum Products Bromine Number ASTM D1159

Colour of Clear Liquids (Platinum Cobalt Scale) ASTM D1209

Density, Relative Density, API of Liquid Petroleum Prods by Hydrometer ASTM D1298

Corrosiveness to Copper from Pet Products by Copper Strip Test ASTM D130

Hydrocarbon Types by FIA ASTM D1319

Smoke Point of Kerosine and Aviation Turbine Fuel ASTM D1322

ASTM Colour ASTM D1500

Saybolt Color of Petroleum Products ASTM D156

Water and Sediment in Fuel Oils by the Centrifuge Method

ASTM D1796

Naphthalene in Aviation Fuels ASTM D1840

Conradson Carbon Residue ASTM D189

Oxidation Stability of Distillate Fuel Oil (Accelerated Method) ASTM D2274

Freezing Point of Aviation Fuels ASTM D2386 / ASTM D7153

Cloud Point ASTM D5771

Cold Filter Plugging Point ASTM D6371

Conductivity of Aviation and Distillate Fuels ASTM D2624

Water and Sediment in Distillate Fuels by Centrifuge ASTM D2709

Bromine Index of Petroleum Hydrocarbons by Electrometric Titration ASTM D2710


GAC



ACCREDITED


No. ATL 0038




Boiling Range Distribution by GC (Sim Dist) ASTM D2887

Base Number by Potentiometric Perchloric Acid Titration ASTM D2896

(Thiol Mercaptan) Sulfur in Gasoline, Kerosene, Distillate Fuels ASTM D3227

Vapour Pressure of Petroleum Products (Reid Method) ASTM D323

Thermal Oxidation Stability of Aviation Turbine Fuel (JFTOT Procedure) ASTM D3241

Acidity in Aviation Turbine Fuels ASTM D3242

Air Release Properties of Petroleum Oils ASTM D3427

Diesel Fuel Diluent in Used Diesel Engine Oils by GC ASTM D3524

Calculated Heat Val, Comp Factor and Rel Density of Gaseous Fuels ASTM D3588

Gum Content in Aviation Fuels by Jet Evaporation Method ASTM D381

Dissolved Gases in Electrical Insulating Oil by GC-Headspace ASTM D3612C

Water Separation Characteristics of Aviation Turbine Fuels (MSEP) ASTM D3948

Density, Relative Density, and API Gravity of Liquids by Densitometer ASTM D4052

Sulfur in Petroleum and Pet. Products by Energy Dispersive X-Ray ASTM D4294

Kinematic Viscosity of Transparent and Opaque Liquids ASTM D445

Carbon Residue (micro method) ASTM D4530

Sediments in Crude Oils and Fuel Oils by Extraction Method ASTM D473

Ash from Petroleum Products ASTM D482

Oxidation Stability of Gasoline - Induction Period Method ASTM D525


GAC



ACCREDITED


No. ATL 0038




Hydrocarbon Type Analysis in Petroleum Distillates through 200°C ASTM D5443

Particulate Contamination in Aviation Fuels ASTM D5452

Total Sulfur in Light Hydrocarbons and Fuels by UVF ASTM D5453

Flash Point by TAG Closed Cup Tester ASTM D56

Hydrogen Sulfide in the Vapour Phase above Residual Fuel Oils ASTM D5705

Lubricity of Diesel Fuels by HFRR ASTM D6079

Particulate Content of Middle Distillate Fuels ASTM D6217

Sulfur Compounds in Natural Gas and Gaseous Fuels by GC/FPD ASTM D6228

Water in Petroleum Products by Coulometric KF ASTM D6304

Aromatic Hydrocarbon Types in Aviation Fuels by HPLC ASTM D6379

Aromatic Hydrocarbon Types in Middle Distillates by HPLC ASTM D6591

Acid Number of Petroleum Products by Potentiometric Titration ASTM D664 (Method A)

Dynamic Viscosity and Density of Liquids by Stabinger Vscosimeter ASTM D7042

Elements by ICP in Middle Distillate Fuels ASTM D7111

Oxygenates in C2, C3, C4, and C5 Hydrocarbons by GC/FID ASTM D7423

Distillation of Petroleum Products at Atmospheric Pressure ASTM D86

Flash Point by Pensky-Martens Closed Cup Manual Tester ASTM D93 Flash Point by Pensky-Martens Closed Cup Automatic

Tester

Water in Petroleum Products and Bituminous Materials by Distillation ASTM D95


GAC



ACCREDITED


No. ATL 0038




Pour Point of Petroleum Products ASTM D97 /ASTM D5950

Acid Number by Colour-Indicator Titration ASTM D974

Conditional Monitoring of In-Service Lubricants by FTIR ASTM E2412

Determination of Asphaltenes (n-Heptane Insolubles) IP 143

Copper Strip Tarnish Test IP 154

Abel Flash Point - Closed-Cup method IP 170

Cold Filter Plugging Point (CFPP) IP 309

Sediment in Residual Fuel Oils and Distillate Blends by Filtration IP 375

Total Sediments in Residual Fuels - Potential & Accelerated IP 390 / ASTM D4870

Elements in Residual Fuel Oil by ICP IP 501

Level of Cleanliness of Aviation Turbine Fuel IP 565

Hydrogen Sulfide in Fuel Oils – Rapid Liquid Phase Extraction Method IP 570

H2S and Mercaptan Sulphur in Liquid Hydrocarbons UOP 163

Trace Metals in Oils by Wet Ashing and ICP-OES UOP 389

Chloride in Petroleum Distillate by Microcoulometry UOP 779

Mercury and Mercury Species in Liquid Hydrocarbons UOP 938

Petrochemicals Water in Volatile Solvents by KF ASTM D1364

Benzene, Toluene, Xylene (BTX) Concentrates Analysis by GC ASTM D6563

Hydrocarbon Types, Oxygenated Compounds and Benzene by GC ASTM D6839

Insulating oils Furanic Compounds in Electrical Insulating Liquids (HPLC) ASTM D5837


GAC



ACCREDITED


No. ATL 0038




Elements in Insulating Oils by ICP-AES ASTM D7151

Power Disspation Factor and Relative Permittivity of Insulating Oils ASTM D924

Interfacial Tension of Oil against Water by the Ring Method ASTM D971

Breakdown Voltage at Power Frequency of Insulating Liquids EN 60156 / IEC 60156

DDF (Tan d) / Rel. Permittivity / d.c. Resistivity EN 60247 / IEC 60247

Water Content by Coulometric KF Titration EN 60814 / IEC 60814

Insulation liquids Specific Resistance of Electrical Insulating Liquids ASTM D1169

Water by Coulometric Karl Fischer Titration ASTM D1533

Sediments and Soluble Sludge in Service-Aged Insulating Oils ASTM D1698

Dielectric Breakdown Voltage of Oil ASTM D1816

Dielectric Breakdown Voltage of Insulating Liquids ASTM D877

Lube oils Water Separability of Petroleum Oils and Synthetic Fluids ASTM D1401

Trace Sediment in Lubricating Oils by Centrifuge ASTM D2273

Additive Elements in Lubricating Oils by ICP ASTM D4951

Elements in used Lube Oils and Base Oils by ICP-AES ASTM D5185

Foaming Characteristics Seq I, 2 & 3 ASTM D892

Insolubles in used Lubricating Oils ASTM D893

Flash and Fire Points by Cleveland Open Cup Tester ASTM D92

Corrosive Sulphur in Used and Unused Lubricating Oils IEC 62535

Crude oil Salts in Crude Oil (Electrometric Method) ASTM D3230


GAC



ACCREDITED


No. ATL 0038




Water in Crude Oil by Distillation ASTM D4006

Sediment and Water in Crude Oil (Centrifuge) ASTM D4007

Water Content of Crude Petroleum by Potentiometric KF ASTM D4377

Water in Crude Oils by Coulometric Karl Fischer Titration ASTM D4928

Organic Chloride in Crude Oil by Combustion and Microcoulometry ASTM D4929 (Method B)

Density and Relative Density of Crude Oils by Digital Density Meter ASTM D5002

Pour Point of Crude Oils ASTM D5853

Turbine oil Oxidation Stability of Steam Turbine Oils ASTM D2272

Hind. Phenolic & Arom. Amine Oxidants in non-zinc Turbine Oils ASTM D6971

Natural gas Analysis of Natural Gas by GC ASTM D1945

Real Natural Gas - Calc. of C.V, D, R.D, W.I from Composition ISO 6976 (Real Gas)

Hydraulic fuel Cleanliness Limits of Hydraulic Fluids NAS 1638

Mineral oils Rust-Preventing Characteristics of Mineral Oil ASTM D665

MTBE MTBE Analysis by Gas Chromatography ASTM D5441

Yanbu Branch – OGC

Chemical Testing (OGC Scope)

Petroleum product

Acid or Base Number ASTM D 974 / IP182

Acidity in Aviation Turbine Fuel ASTM D 3242

Acidity of Black Oils ASTM D664

API Gravity at 60 0F ASTM D1298/4052

Ash from Petroleum Products ASTM D482


GAC



ACCREDITED


No. ATL 0038




Colour of Petroleum Products - ASTM ASTM D1500

Colour of Petroleum Products (Saybolt Chronometer Method) ASTM D156

Colour Pt-Co ASTM D1209

Conradson Carbon Residue ASTM D189

Copper Strip Corrosion ASTM D130

Copper Strip Corrosion ASTM D1275

Distillation of Petroleum Products ASTM D86

Electrical Conductivity of Aviation and Distillate Fuels ASTM D2624

Existent Gum in Fuels by Evaporation ASTM D381

Flash Point Abel IP170

Flash Point by Pensky-Martens Closed Cup Tester ASTM D93

Freezing Point of Aviation Fuels ASTM D2386

Hydrocarbon Types in Liquid Petroleum Products by F.I.A. ASTM D1319

Kinematic Viscosity of Transparent and Opaque Liquids ASTM D445

Mercaptan Sulphur ASTM D3227

Pour Point of Petroleum Products ASTM D97

Sediment by Extraction ASTM D473

Smoke Point of Aviation Turbine Fuels ASTM D1322

Sulphur in Petroleum Products by XRF Spectroscopy ASTM D4294

Vapor Pressure ASTM D323

Water by Distillation ASTM D95


GAC



ACCREDITED


No. ATL 0038




Water by Karl Fischer ASTM D4928

Water by Karl Fischer ASTM D6304

Water Separation Characteristics of Aviation Turbine Fuels ASTM D3948

Total Base Number ASTM D2896

Petrochemicals Acidity of Solvents ASTM D1613

Water by Karl Fischer ASTM E1064

Insulation liquids Water Content ASTM D1533

Breakdown Voltage (1 mm or 2 mm Gap-Mushroom Electrodes) ASTM D1816

Breakdown Voltage ( 2.5 mm Gap-Spherical Electrodes) IEC156

Power Factor @ 25°C / 90°C ASTM D924

INTERFACIAL TENSION ASTM D971

lube oils FOAMING SEQUENCE ASTM D 892

Flash Point COC °C ASTM D92

END


GAC



ACCREDITED


No. ATL 0038




SGS Inspections Services Saudi Arabia Ltd

is recorded as issuing GAC accredited reports to organizations in the countries listed below. This list is current at the time of issue of this schedule.

United Arab Emirates Bahrain Saudi Arabia Oman Qatar Kuwait Yemen

Documents

10.6 Schedule of Accreditation Issue No: 2/ Issue Date: 5 ...gac.org.sa/uploads/cab_list/att_1/AC_10_6_Schedule_of... · Cations by IC ASTM 6919-09 Oxyhalides by IC APHA 4110 D Anions