Upload
jithujohn
View
111
Download
9
Embed Size (px)
DESCRIPTION
j
Citation preview
In Conjunction with SATIP-L-350-01
In Conjunction with SATIP-L-350-01
3.2 Internal Cleanliness or Flushing SAIC-L-2017 SAIC-L-2017SATR-A-2008 H1 H1
RH1
H1
R2
This is in conjunction with SATIP-L-350-01or with the applicable piping/equipment SATIP.
* See Note 1 (General Notes)
DISCIPLINE:
REMARKS
MECHANICAL
QUALITY PROCEDURE
1.0 DOCUMENT REVIEW
PROJECT PHASE & Activity Code
W1
H1SATR-A-2007 H1
3.4
3.5
3.0 APPLICATION
3.1 Pre-Test Punch Listing SAIC-A-2010
SAIC-A-2020 S
4.0
Filling & Pressurizationa) Strength testb) Service test
SAIC-A-2020
POST- TEST
W1
W1
SAIC-A-2004 R1
MATERIAL RECEIVING
Verification of Testing Medium for Pneumatic Testing
SAIC-A-2021SATR-A-2001 H1
4.1 SAIC-A-2022
APPROVED DATE
25-May-05
SAUDI ARAMCO
TASK / ACTIVITY CNTRCTR
QUALITY RECORD
PROJECT TITLE: CONTRACTOR/SUBCONTRACTORWBS/BI/JO/NO.
SAIC-A-2021Visual Inspection at Test Pressure
De-Pressurization
Pneumatic Pressure TestingSAUDI ARAMCO TYPICAL INSPECTION PLAN SATIP No.
SATIP-A-004-01
INSPECTION RESPONSIBILITYASSIGNMENTS
2.1
2.0
1.2 Review of Test Package Preparation
ITEM NO.
RH1
3.3Test Preparation & Verification of Testing equipment (including safety requirements) SAIC-A-2009
RH1
S
SATR-A-2002SATR-A-2005SATR-A-2006SATR-A-2001
for test Manifold)
SAIC-A-2009
H1
RH1
1.1 Pressure Testing Procedure SAIC-A-2001 RH1
SAUDI ARAMCO ID/PID - REV 1 - 5/18/05 (Standards Cutoff - August 2004)
1.3 Line Flushing or Internal Cleanliness Procedure SAIC-L-2001 RH1
SAIC-A-2003
Page 1 of 2
DISCIPLINE:
REMARKS
MECHANICAL
QUALITY PROCEDURE
PROJECT PHASE & Activity Code
APPROVED DATE
25-May-05
SAUDI ARAMCO
TASK / ACTIVITY CNTRCTR
QUALITY RECORD
PROJECT TITLE: CONTRACTOR/SUBCONTRACTORWBS/BI/JO/NO.
Pneumatic Pressure TestingSAUDI ARAMCO TYPICAL INSPECTION PLAN SATIP No.
SATIP-A-004-01
INSPECTION RESPONSIBILITYASSIGNMENTSITEM
NO.
SAUDI ARAMCO ID/PID - REV 1 - 5/18/05 (Standards Cutoff - August 2004)
Witness: QA/QC organization shall be notified of the timing of Inspection or test in advance. However, the inspection or test shall be performed as scheduled if the QA/QC organization representative is not present.
If the Main Contractor delegates the assigned responsibility to the Subcontractor, then the Main Contractor will have the same degree of responsibility as assigned to Saudi Aramco.
Hold: QA/QC organization shall be notified of the timing of inspection or test in advance. Inspection or test shall not be carried out without the QA/QC organization representative in attendance.
5
3
1
2
4
H2R1W2
LEGEND
100% Review of Documentssample Review of Documents Surveillance
RH1RH2
100% Review and Approval of DocumentsSample Review and Approval of Documents
S
The first three incidents of each Inspection or testing activity listed require 100 % participation by Saudi Aramco Site Inspection Personnel. After this period, Saudi Aramco Inspection may adjust the levels of Saudi Aramco participation based upon the Contractor’s performance.
Surveillance: QA/QC organization to monitor work in progress without notice from Construction Organization.
GENERAL NOTES
H1
100% Witness Inspection/TestSample Witness Inspection/Test100% Hold Point for QC Inspection or Test
W1
R2
Sample Hold Point for QC Inspection or Test
Page 2 of 2