4 1/8” HH358 2001 Hughes Christensen Company. Hughes, Christensen, the HT emblem, the Christensen diamond emblem, Black Diamond, Spectrum, Black Ice, ChipMaster, STAR, UltraMax, GT, Super Scoop, MAX, Tricone, Ballaset, and HydraBoss are registered trademarks of Baker Hughes Incorporated. BlackTrax, HardRok, High Flow, BOSS, CSE, SEC, ECP, Clean Sweep, RacePak, RWD and Duraset are trademarks of the company. * The ranges of bit weight and RPM shown are representative of typical operating parameters, but will not necessarily yield optimum bit life or lowest drilling cost. It is not recommended that the upper limits of both weight and RPM be run simultaneously. Contact your local Hughes representative for recommendations in your area. ESPECIFICACIONES DEL PRODUCTO IADC: M842 Numero de Aletas 8 Cantidad de Cortadores: N/A Diámetro del Cortador: N/A Numero de toberas: 0 Tipo de Toberas: N/A TFA Fijo: 1.2 in^2 Longitud del calibre: 1.5 in^2 (38.0 mm) Area de desaloj o: 3 in^2 (19.3 cm^2) Cuadro de Apriete: 123-210-325 Conexión 2 3/8” API Regular Torque de Apriete: 1.8 – 2.0 kft-lb (2.4 – 2.7 kNm) Numero de Parte: E0848 Estatus: M RECOMENDACIONES DE OPERACION * Gasto hidráulico: 80 - 160 g pm (30 0 - 600 lp m) Velocidad de Rotación: 1000 RPM Peso sobre la herramienta: 10 klb (5 tn)

041 HH358 E0848 Esp

Download PDF Report

Upload
emmanuel
View
214
Download
0

Embed Size (px)

DESCRIPTION

especificaciones

Citation preview

4 1/8 HH358

2001 Hughes Christensen Company. Hughes, Christensen, the HT emblem, the Christensen diamond emblem, Black Diamond, Spectrum, Black Ice, ChipMaster, STAR, UltraMax, GT, Super Scoop, MAX, Tricone, Ballaset, and HydraBoss are registered trademarks of Baker Hughes Incorporated. BlackTrax, HardRok, High Flow, BOSS, CSE, SEC, ECP, Clean

Sweep, RacePak, RWD and Duraset are trademarks of the company. * The ranges of bit weight and RPM shown are representative of typical operating parameters, but will not necessarily yield optimum bit life or lowest drilling cost. It is not recommended that the upper limits of both weight and RPM be run simultaneously. Contact your local Hughes representative for recommendations in your area.

ESPECIFICACIONES DEL PRODUCTO IADC: M842 Numero de Aletas 8 Cantidad de Cortadores: N/A Dimetro del Cortador: N/A Numero de toberas: 0 Tipo de Toberas: N/A TFA Fijo: 1.2 in^2

Longitud del calibre: 1.5 in^2 (38.0 mm) Area de desalojo: 3 in^2 (19.3 cm^2) Cuadro de Apriete: 123-210-325

Conexin 2 3/8 API Regular Torque de Apriete: 1.8 2.0 kft-lb (2.4 2.7 kNm)

Numero de Parte: E0848 Estatus: M

RECOMENDACIONES DE OPERACION * Gasto hidrulico: 80 - 160 gpm (300 - 600 lpm) Velocidad de Rotacin: 1000 RPM Peso sobre la herramienta: 10 klb (5 tn)