Rated Engine HP 76 hp (57 kW)

Max Power: 80 hp (59 kW)

Operating WeightEX110: 24,700 lbs

(11 200 kg)

Bucket Capacity0.25 – 0.77 yd3

(0.19 – 0.59 m3)

3

Putting Technology To Work

Features

Specifics

The EX110 is smoother, faster and more powerful than its predecessor, the EX100. It’svery trailerable, easy to get into tight applications, yet extremely productive. TheEX110 features the most advanced computerized horsepower and control systemavailable: Hitachi’s exclusive Dash-5 system. The controls are responsive; in fact,

infinitely controllable. The machine’s power and balance are exciting.

■

■

• Isuzu A-4BG1 non-turbo, direct injection diesel engine is extremely fuel-efficient and reliable. It meets all EPA clean air requirements.

• Dash-5 engine/hydraulic control with three power modes and four work modes.

• Power modes:1. Normal: Standard operation.2. H/P: Increased engine rpm and horsepower.3. E: Maximum fuel efficiency in light duty

applications.• Work modes:

1. General Purpose2. Grading 3. Precision4. Attachment, which provides automatically adjusted

oil flow to hydraulic attachments.• Cab mounted on six fluid-filled, vibration dampening,

shock absorbing mounts.• Compact travel motor design; protected piping reduces

opportunity of damage.

• The updated work modes provide power in the order ofinherent priority to do the best job for the project athand. The Hitachi EX110 has excellent multi-functionfeatures which allow multiple jobs such as travel, swingand boom raise all at the same time without any onefunction stopping.

• The Super EX110, as with all Hitachi excavator models,is built to maximize performance, reliability, andoperator comfort through optimum design and qualitycomponents. The Isuzu engine is matched to thehydraulic pump for outstanding multiple functionperformance. The undercarriage, carbody and frontattachment are all balanced and designed for maximumstrength. All of this means that your Hitachi EX110 willwork economically and productively for years and forthousands of hours at minimum operating costs.

VSUPER

-Operating Travel Max. Lift Traction

Model Weight Speeds Capacity Gradeability ForceEX110 24,700 lbs 0 - 3.4 mph 14,240 lbs 35° 19,600 lbf

(11 200 kg) (0 - 5.5 km/h) (6 460 kg) (70%) (8 900 kgf)

5

Powertrain: Efficient, Powerful

Economical Isuzu 76 hp EngineIs Dependable, Long-Lasting■

The Isuzu engine in the EX110 is one of the most proven, mostdependable engines in the world. It is a non-turbo’d, direct injectionengine with a low rpm peak torque of 210 lbf.ft. This is an updatedengine that meets all EPA, CARB pollution and noise standards. The4 cylinder, 264 cu. in. (same size as the EX160) engine is rated at 76hp (57 kW).

Enhanced E-P Pump Control■

A sophisticated micro-computer system guided by multiple actuatorsis exclusively standard on the EX110. Hitachi is renowned for thesmooth operation of its excavators and this model is no exception.The new Dash-5 controls provide quick, accurate response to multi-function swing-lift-bucket curl operations.

Enhanced Cooling Protection■

The EX110 features a 4.9 U.S. gallon (18.4 liter) radiator coolanttank, a tightly fitting fan shroud and a high capacity fan. Theradiator fins are easily cleaned, and the coolant level is easilychecked from the ground during normal inspection.

OutstandingTraction Force■

The traction force has been increased to 19,600 lbf (8 900 kgf) forimproved movement through mud and over obstacles.

New E-P Control System

Work Modes Work Modes

PowerModes H/P&E

Auto Idle

Engine

EC Motor

Pump

SolenoidValve

PressureSwitch

Electric SystemHydraulic Pilot System

Work ModeSelect Switch

Dual-Type Fuel Control

Power ModeSelect Switch H/P & E

Auto Idle Switch

Operator Comfort:

The cab floats on six fluid-filled elastic mounts thatsmooth out shocks and jolts.

Model Features: EX110

The hand control levers can be raised or loweredto match the operator’s build, and the controlscan either glide forward or back with the seat orremain fixed while the seat moves.

The work modes, power modes, air conditioningcontrols, and dial-type engine speed control areall located beside the operator.

A Top Priority

AM-FMRadio

4

Work Modes For Increased Performance■

The four work modes have been enhanced from prior models.

① The General Purpose Mode is appropriate for general digging and truckloading. All circuits work together.➁ The Grading Mode provides priority to the combined operation of boom raise,stick forward and bucket adjustment while limiting control response so that themovement is smooth.

➂ The Precision Mode keeps the front attachment moving precisely and slowly.➃ The Attachment Mode is designed to automatically match the oil flowrequirements of selected attachments such as a hydraulic hammer. Additionalpiping is required (optional).

H/P and E Modes For Increased Efficiency■

• The Normal mode is for normal or average applications. The engine runsat an efficient maximum speed for longest life and general economy. The hydraulic pump runs at a baseline 100%.

• The H/P mode provides the full power of the EX110 on command. This function increases engine rpm by 6% when activated, thus providing 5% more horsepower when needed – 80 hp (59 kW).

– Engine rpm automatically increases when the arm-in function meets resistance.

– Automatically switches back to normal rpm and 76 hp (57 kW) when resistance is overcome for fuel savings.

• The E mode provides 94% of full power while providing 15% more fuel efficiency. It is appropriate for light-duty work because it allows you to work longer before refueling.

4

3

2

1

Sitting in one place, all day, operating a machine productively takesconcentration and dedication to doing a good job. It also means that a smart

owner is going to do everything possible to make sure his operator iscomfortable in the cab. The Hitachi EX110 is an excellent example of how

comfortable a well-designed cab can be.

The widest cab in its class: 3 ft. 4 in. (1 005 mm). Lots of leg room, wide sidedoor. The ergonomically-designed seat is fully adjustable with tilting armrests,

tilting back, floating or solidly fixed seat, headrest tilt, and seat raise/lower.

Specifications: EX110

76

EngineModel ......................................................................................Isuzu A-4BG1Type .................................................4-cycle water-cooled, direct injectionAspiration ..............................................................................................NormalNo. of cylinders...............................................................................................4Rated flywheel horsepower

(DIN 6271, net).................................... 80 PS (59 kW) at 2,100 rpm(min-1)Rated flywheel horsepower

(SAE J1349, net) ...................................76 hp (57 kW) at 2,100 rpm(min-1)Maximum torque..............................................................210 lbf•ft (29 kgf•m)

at 1,500 rpm (min-1)Piston displacement................................................................264 in3 (4.329 L)Bore and stroke.........................................4.13” x 4.92” (105 mm x 125 mm)Batteries ...................................................................................2 x 12 V, 65 AHGovernor.................................................................Mechanical, speed control

with stepping motor

Hydraulic System• Work mode selector: General purpose mode / Grading mode /

Precision mode / Attachment modeMain pumps . . . . . . . . . . . . . .2 variable displacement axial piston pumpsMaximum oil flow . . . . . . . . . .2 x 25.1 US gpm

(95 L/min, 20.9 Imp gpm)Pilot pump . . . . . . . . . . . . . . .1 gear pumpMaximum oil flow . . . . . . . . . .9.3 US gpm

(35.3 L/min, 7.8 Imp gpm)

Hydraulic MotorsTravel. . . . . . . . . . . . . . . . . . . .2 variable displacement axial piston motorsSwing. . . . . . . . . . . . . . . . . . . .1 axial piston motor

Relief Valve SettingsImplement circuit . . . . . . . . . .4,980 psi (350 kgf/cm2)Swing circuit . . . . . . . . . . . . . .4,550 psi (320 kgf/cm2)Travel circuit . . . . . . . . . . . . . .4,980 psi (350 kgf/cm2)Pilot circuit . . . . . . . . . . . . . . . 540 psi (38 kgf/cm2)

Hydraulic CylindersHigh-strength piston rods and tubes. Cylinder cushion mechanisms are provided in all cylinders to absorb shock when pistons reach their stroke ends.

DimensionsQty Bore Rod diameter

Boom 2 3.74” (95 mm) 2.76” (70 mm)

Arm 1 4.13” (105 mm) 2.95” (75 mm)

Bucket 1 3.74” (95 mm) 2.56” (65 mm)

Hydraulic FiltersHydraulic circuits use high quality hydraulic filters. A suction filter isincorporated in the suction line, and 10 micron full-flow filters in the return lineand swing/travel motor drain lines.

ControlsPilot controls. Hitachi’s original shockless valve and quick warm-up systembuilt in the pilot circuit.

Implement levers . . . . . . . . . . . . . . . . . . . . 2Travel levers with pedals . . . . . . . . . . . . . .2

UpperstructureRevolving FrameWelded sturdy box construction, using heavy-gauge steel plates for ruggedness.

Swing MechanismAxial piston motor with planetary reduction gear is bathed in oil. Swing circleis single-row, shear-type ball bearing with induction-hardened internal gear.Internal gear and pinion gear are immersed in lubricant. Swing parking brakeis spring-set/hydraulic-released disc type. Swing speed.............................................................................13.5 rpm (min-1)

Operator’s CabIndependent roomy cab, 40” (1 005 mm) wide by 66” (1 665 mm) high,conforming to ISO* Standards. Reinforced glass windows on 4 sides forexcellent visibility. Front windows (upper and lower) are openable.Adjustable, reclining seat with armrests; movable with or without controllevers. * International Standardization Organization

UndercarriageTracksTractor-type undercarriage. Welded track frame using carefully selected materials. Side frame welded to track frame. Lubricated track rollers, idlers,and sprockets with floating seals. Track shoes with triple grousers made ofinduction-hardened rolled alloy. Flat and triangular shoes are also available.Heat-treated connecting pins with dirt seals. Hydraulic (grease) track adjusterswith shock-absorbing recoil springs.

Numbers of Rollers and Shoes on Each SideUpper rollers . . . . . . . . . . . . 1Lower rollers . . . . . . . . . . . . . 6

Traction DeviceEach track driven by 2-speed axial piston motor through planetary reductiongear for counter rotation of the tracks. Sprockets are replaceable. Parkingbrake is spring-set/hydraulic-released disc type. Travel shockless relief valvebuilt in travel motor absorbs shocks when stopping travel, ensuring smoothstops.Automatic transmission system: High - LowTravel speeds . . . . . . . . . . . . . . . . . High: 0 to 3.4 mph (5.5 km/h)

Low: 0 to 2.2 mph (3.5 km/h)Maximum traction force . . . . . . . . . . . . . .19,600 lbf (8 900 kgf)

Track shoes . . . . . . . . . . . . . . 41

These specifications are subject to change without notice.Illustrations and photos show the standard models, and may ormay not include optional equipment, accessories, and all standardequipment with some differences in color and features.

Perfectly Matched Hydraulic System■

Hitachi expertly matches the engine to the hydraulicpumps and control valves for the best response and longestlife possible. The pumps are designed to work specificallywith the Isuzu engine – regardless of rpm or work load.

Super StrongPiping■

Hitachi is legendary for its strong,long-lasting hydraulic hose, pipingand fittings. This provides outstandingreliability and cleanliness.Longer-Life Undercarriage

■

Hitachi undercarriages feature premium grade trackswith large track links fitted with struts for addeddurability. Pin seals prevent dirt in the bushings andreduce inner wear. The tracks feature heavy-duty tracklinks, front idlers, upper/lower rollers and track center

Air CleanerStored Inside

RemoteLube

Round HydraulicTank

A round hydraulic tank providessuperior circulation of the hydraulicoil so that it’s kept cleaner andmore evenly cooled.

■

Rugged X-Frame■

The tough tractor-typeundercarriage and X-formcenter frame assuresuperb durability.

Round TravelMotor Covers■

Round travel motor coversprovide a higher resistanceto deformation.

AvailableDozerBlade

PremiumQuality Design■

Hitachi ConstructionMachinery invests over $75million a year in research anddevelopment to build ever-better hydraulic excavators.

That research shows itself over and over in the new Dash-5EX110. It has an excellent cab that is comfortable. Theundercarriage is extremely rugged, and the boom and arm aredesigned for years of use.

■

A factory-installed dozerblade is available

which can eliminate the need for a second machine to fill inthe trench. Blade height is 23.6 in. (600 mm). The bladewidth is 98.03 in. (2 490 mm). Maximum blade lift angle is23 degrees.

Long-Life, High-Hour Durability

Weights and Ground PressureEquipped with 14’0” (4.27 m) boom, 7’ 5” (2.26 m) arm and 0.60 yd3

(0.46 m3: PCSA heaped) bucket.Shoe type Shoe width Operating weight Ground pressure

20” 23,600 lb 5.40 psi (0.38 kgf/cm2)(500 mm) (10 700 kg)

Triple 24” 24,300 lb 4.55 psi (0.32 kgf/cm2) grouser (600 mm) (11 000 kg)

28” 24,700 lb 3.98 psi (0.28 kgf/cm2) (700 mm) (11 200 kg)___

Rubber 20” 23,600 lb 5.26 psi (0.37 kgf/cm2) (500 mm) (10 700 kg)___

Flat 20” 24,700 lb 5.40 psi (0.38 kgf/cm2) (510 mm) (11 200 kg)

Triangular 28” 24,300 lb 3.98 psi (0.28 kgf/cm2) (700 mm) (11 000 kg)

Weights of the basic machines [including 3,750 lb (1 700 kg) counterweight and triplegrouser shoes, but excluding front-end attachment, fuel, hydraulic oil, engine oil, andcoolant etc. are:EX110 . . . . . . . . . . . . . . . . . . . . . . . .18,700 lb (8 500 kg) with 20” (500 mm) shoes

9

Dimensions

BACKHOEEX110

Working Ranges

➤

➤

➤

➤

EX110A Distance between tumblers 8’7” (2 620 mm)B Undercarriage length 10’11” (3 340 mm)

*C Counterweight clearance 2’11” (890 mm)D Rear-end swing radius 7‘0” (2 130 mm)D’ Rear-end length 6’11” (2 100 mm)E Overall width of upperstructure 8‘1” (2 460 mm)F Overall height of cab 8’11” (2 720 mm)

*G Min. ground clearance 1’5” (440 mm)H Track gauge 6’6” (1 990 mm)I Track shoe width G 20” (500 mm) G 24” (600 mm) G 28” (700 mm) F 20” (510 mm)J Undercarriage width 8’2” (2 490 mm) 8’6” (2 590 mm) 8’10” (2 690 mm) 8’2” (2 500 mm) K Overall width 8’2” (2 500 mm) 8’6” (2 590 mm) 8’10” (2 690 mm) 8’2” (2 500 mm)L Overall length

With 6’5” (1.96 m) arm 23’7” (7 190 mm)With 7’5” (2.26 m) arm 23’7” (7 190 mm)With 9’3” (2.81 m) arm 23’8” (7 210 mm)

M Overall height of boomWith 6’5” (1.96 m) arm 8’6” (2 600 mm)With 7’5” (2.26 m) arm 8’10” (2 680 mm)With 9’3” (2.81 m) arm **8’10” (2 680 mm)

N Track heightWith triple grouser shoes 2’7” (790 mm)

*Excluding track shoe lug G: Triple grouser shoe** This dimension is shown in the transportation hole position of the arm F: Flat shoe

EX110

Arm length 6’5” (1.96 m) 7’5” (2.26 m) 9’3” (2.81 m)

A Max. digging reach 24’5” (7 430 mm) 25’3” (7 700 mm) 26’10” (8 180 mm)

A’ Max. digging reach 23’11” (7 290 mm) 24’10” (7 570 mm) 26’5” (8 050 mm)(on ground)

B Max. digging depth 15’8” (4 780 mm) 16’8” (5 080 mm) 18’6” (5 630 mm)

B’ Max. digging depth 14’10” (4 520 mm) 15’11” (4 850 mm) 17’10” (5 430 mm)(8’ level)

C Max. cutting height 26’0” (7 930 mm) 26’7” (8 110 mm) 27’5” (8 360 mm)

D Max. dumping height 18’2” (5 530 mm) 18’8” (5 700 mm) 19’7” (5 960 mm)

E Min. swing radius 7’7” (2 300 mm) 7’8” (2 330 mm) 8’6” (2 590 mm)

F Max. vertical wall 14’2” (4 320 mm) 15’2” (4 620 mm) 16’10” (5 120 mm)

ISO 20,100 lbf (9 100 kgf)

Bucket diggingforce 17,600 lbf SAE: PCSA

(8 000 kgf)

ISO 13,400 lbf 12,300 lbf 10,800 lbf(6 100 kgf) (5 600 kgf) (4 900 kgf)

Arm crowd forceSAE: PCSA 13,000 lbf 11,900 lbf 10,600 lbf

(5 900 kgf) (5 400 kgf) (4 800 kgf)

* Excluding track shoe lug

Specifications: EX110Specifications: EX110

8

Service Refill CapacitiesUS gal Liters Imp gal

Fuel tank 66.1 250.0 55.0Engine coolant 4.9 18.4 4.0Engine oil 3.9 14.7 3.2Swing mechanism 0.8 3.2 0.7Travel final drive device 0.8 3.0 0.7

(each side)Hydraulic system 35.4 134.0 29.5Hydraulic tank 18.2 69.0 15.2

Capacity Width

Without With No. PCSA CECE side side of Weight

heaped heaped cutters cutters teeth

0.25 yd30.17 m3 18” 22” 3 530 lb

(0.19 m3) (450 mm) (550 mm) (240 kg)0.39 yd3

0.25 m3 23” 28” 3 620 lb(0.30 m3) (580 mm) (700 mm) (280 kg)0.52 yd3

0.33 m3 27” 31” 4 730 lb(0.40 m3) (680 mm) (800 mm) (330 kg)0.60 yd3

0.40 m3 33” 38” 5 840 lb(0.46 m3) (850 mm) (970 mm) (380 kg)0.72 yd3

0.45 m3 35” 40” 5 880 lb(0.55 m3) (890 mm) (1 010 mm) (400 kg)0.77 yd3

0.50 m3 37” 42” 5 900 lb(0.59 m3) (950 mm) (1 070 mm) (410 kg)

*1 0.60 yd30.40 m3 33” 38” 5 970 lb

(0.46 m3) (850 mm) (970 mm) (440 kg)*2 0.72 yd3

0.45 m3 35” 40” 5 1,080 lb(0.55 m3) (890 mm) (1 010 mm) (490 kg)

*3 0.72 yd30.45 m3 35” 40” 5 1,040 lb

(0.55 m3) (890 mm) (1 010 mm) (470 kg)V-Type bucket: 0.46 yd3 (0.35 m3: CECE heaped) 3 820 lb

(370 kg)One point ripper 1 710 lb

(320 kg)Clamshell bucket: 0.39 yd3 (0.30 m3: CECE heaped), 6 1,520 lb

Width 22” (560 mm) (690 kg)Slope-finishing blade: Width-39” (1 000 mm), Length-63” (1 600 mm) 1,050 lb

(475 kg)

* With 28” (700 mm) shoes only *1 Reinforced bucket *2 Level-pin-reinforced bucket *3 H-bucket

Buckets

●● Suitable for materials with density of 3,370 lb/yd3 (2 000 kg/m3) or less

✦✦ Suitable for materials with density of 2,700 lb/yd3 (1 600 kg/m3) or less

■■ Suitable for materials with density of 1,850 lb/yd3 (1 100 kg/m3) or less

✤✤ Heavy-duty service✧✧ Slope finishing service- Not recommended

Backhoe AttachmentsBoom and arms are of welded, box-section design. Boom length: 14’0” (4.27 m)Arms available in lengths: 6’5” (1.96 m)

7’5” (2.26 m)9’3” (2.81 m)

Bucket is of welded steel structure. Side clearance adjustment mechanism provided on the bucket joint.

Reinforced Front AttachmentBulkheads are provided inside the frontattachment to resist torsion and thickenedplates are used in areas subject to stressconcentration for added durability in toughoperations.

Material (loose weight) General-Purpose Bucket* Heavy-Duty Bucket*3,400 - 3,100 lb/yd3 (2 020 - 1 840 kg/m3)

Sand and gravel, wet 0.63 yd3 0.5 m3 0.50 yd3 0.4 m3

Sand, wet 0.63 yd3 0.5 m3 0.50 yd3 0.4 m3

2,900 - 2,550 lb/yd3 (1 720 - 1 510 kg/m3)Sand and gravel, dry 0.75 yd3 0.6 m3 0.63 yd3 0.5 m3

Sand, moist 0.75 yd3 0.6 m3 0.63 yd3 0.5 m3

Rock, granite, blasted and broken 0.63-0.88 yd3 0.5-0.7 m3 0.50-0.75 yd3 0.4-0.6 m3

Clay, wet 0.75 yd3 0.6 m3 0.63 yd3 0.5 m3

Earth, wet 0.75 yd3 0.6 m3 0.63 yd3 0.5 m3

Limestone, broken or crushed 0.50-0.75 yd3 0.4-0.6 m3 0.50-0.63 yd3 0.4-0.5 m3

Earth, dry 0.63-0.75 yd3 0.5-0.6 m3 0.63 yd3 0.5 m3

2,500 - 2,100 lb/yd3 (1 480 - 1 250 kg/m3)Clay, dry 0.63-0.88 yd3 0.5-0.7 m3 0.75 yd3 0.6 m3

Sand, dry 0.88 yd3 0.7 m3 0.75 yd3 0.6 m3

Shale 0.88 yd3 0.7 m3 0.75 yd3 0.6 m3

Earth, loam 0.88 yd3 0.7 m3 0.75 yd3 0.6 m3

Caliche 0.63-0.88 yd3 0.5-0.7 m3 0.50-0.75 yd3 0.4-0.6 m3

1,780 - 1,170 lb/yd3 (1 050 - 690 kg/m3)Coal 1.25 yd3 1.0 m3 - -Topsoil 1.38 yd3 1.1 m3 - -Peat, wet 1.75 yd3 1.3 m3 - -

950 - 700 lb/yd3 (560 - 420 kg/m3)Cinders 2.00 yd3 1.5 m3 - -Peat, dry 2.75 yd3 2.1 m3 - -Wood chips 3.25 yd3 2.5 m3 - -

* Contact your Hitachi dealer for optimum, bucket and attachment selections. These recommendations are for general conditions and average use.Larger buckets may be possible for flat and level operations, less compacted materials, and volume loading applications such as mass excavationapplications in ideal conditions. Smaller buckets are recommended for adverse conditions such as off-level applications and uneven surfaces.

Bucket Selection Chart Bucket capacity indicated is SAE heaped.

RecommendationEX110-5

6’ 5” 7’ 5” 9’ 3”(1.96 m) (2.26 m) (2.81 m)

arm arm arm

●● ●● ●●

●● ●● ●●

●● ●● ●●

●● ●● ✦✦ *

●● ✦✦ -

✦✦ ■■ -

●● ●● ✦✦ *

✦✦ - -

✦✦ - -

●● ●● ●●

✤✤ ✤✤ -

●● ●● -

✧✧ ✧✧ ✧✧

Specifications: EX110

11

ENGINE• H/P mode control• E mode control• 40 A alternator• Dry-type air filter with evacuator

valve (with safety element)• Cartridge-type engine oil filter• Cartridge-type engine oil

bypass filter• Cartridge-type fuel filter• Air cleaner double element• Radiator and oil cooler with

dust protective net• Radiator reserve tank• Fan guard• Isolation-mounted engine• Auto-idle system

HYDRAULIC SYSTEM• Work mode selector• E-P control system• Quick warm-up system for

pilot circuit• Shockless valve in pilot circuit• Boom-arm anti-drift valve• Control valve with main relief

valve• Extra port for control valve• Suction filter• Full-flow filter• Pilot filter

CAB• All-weather sound-suppressed

steel cab • Reinforced, tinted (bronze color)

glass windows• 6 fluid-filled elastic mounts• Openable front and left side

windows• Intermittent retractable

windshield wipers• Front window washer• Adjustable reclining suspension

seat with adjustable armrests• Footrest• Electric double horn• Auto-tuning radio with

digital clock • Auto-idle switch• Seat belt• Cigarette lighter• Ashtray• Parcel pocket• Glove compartment• Floor mat• Heater• Pilot control shut-off lever• Air conditioning• Hot & Cool box

MONITOR SYSTEM• Meters:

Hourmeter, engine coolant temperature gauge and fuel meter.

• Warning lamps:Alternator charge, engine oilpressure, engine overheat, aircleaner clog and minimum fuellevel.

• Pilot lamps:Engine preheat, engine oil level, engine coolant level and hydraulic oil level.

• Alarm buzzers:Engine oil pressure and engine overheat.

LIGHTS• 2 working lights

UPPERSTRUCTURE• Undercover• 3,750 lb (1 700 kg) counterweight• Fuel level float• Hydraulic oil level gauge• Tool box• Rearview mirror • Swing parking brake

• Travel motion alarm deviceUNDERCARRIAGE• Travel parking brake• Travel motor covers• Track center guards• Hydraulic track adjuster• Bolt-on sprocket• Upper rollers and lower rollers• Reinforced track links with pin seals• 28” (700 mm) triple grouser shoes

FRONT ATTACHMENTS• Bucket clearance adjust mechanism• Centralized lubrication system• Dirt seals on all bucket pins• 7’5” (2.26 m) arm

MISCELLANEOUS• Standard tool kit• Lockable machine covers• Lockable fuel filling cap• Skid-resistant tapes and handrails

• Hose rupture valves• Electric fuel refilling pump• Swing motion alarm device with lamp• Additional pump• Piping kit for extra valve port

• Pre-cleaner• Tropical cover• One-point ripper for ripping hardpan• Clamshell bucket for deep vertical excavations

such as manholes, pilings, footings, etc.

Standard Equipment

Optional Equipment Optional equipment may vary by country, so please consult your Hitachi dealer for details.

Standard equipment may vary by country, so please consult your Hitachi dealer for details.

• Slope-finishing blade for slope finishing jobs… scraping up or down, compacting, leveling, grading, etc.

• Front glass lower guard

• Dozer Blade-- Weight: 1,190 lbs (540 kg)-- Width: 98.03 in (2 490 mm)-- Height: 23.6 in (600 mm)

Factory Attachment

Lifting Capacities: EX110

10

EX110Load radius

6 ft 7 in (2.0 m) 9 ft 10 in (3.0 m) 13 ft 1 in (4.0 m) 16 ft 5 in (5.0 m) 19 ft 8 in (6.0 m) 23 ft 0 in (7.0 m) At max. reach

*5.45 *5.45 *2.73 *2.73(2.47) (2.47) (1.24) (1.24)*5.47 *5.47 *5.20 *5.20 *2.58 *2.58(2.48) (2.48) (2.36) (2.36) (1.17) (1.17)*6.13 *6.13 *5.86 *5.86 *2.54 *2.54(2.78) (2.78) (2.66) (2.66) (1.15) (1.15)

*9.55 *9.55 *7.45 *7.45 5.80 *6.48 4.25 *5.75 *2.56 *2.56(4.33) (4.33) (3.38) (3.38) (2.63) (2.94) (1.93) (2.61) (1.16) (1.16)

7.94 *9.10 5.60 *7.32 4.14 6.22 *2.67 *2.67(3.60) (4.13) (2.54) (3.32) (1.88) (2.82) (1.21) (1.21)7.58 *10.47 5.40 *8.09 4.06 6.11 *2.87 *2.87

(3.44) (4.75) (2.45) (3.67) (1.84) (2.77) (1.30) (1.30)7.39 *11.13 5.25 8.02 3.97 6.04 *3.17 *3.17

(3.35) (5.05) (2.38) (3.64) (1.80) (2.74) (1.44) (1.44)11.68 *14.66 7.30 *11.09 5.18 7.96 3.95 6.00 *3.64 *3.64(5.30) (6.65) (3.31) (5.03) (2.35) (3.61) (1.79) (2.72) (1.65) (1.65)

*13.60 *13.60 11.79 *13.34 7.32 *10.34 5.20 7.96 *4.50 *4.50(6.17) (6.17) (5.35) (6.05) (3.32) (4.69) (2.36) (3.61) (2.04) (2.04)

*11.07 *11.07 7.45 *8.62(5.02) (5.02) (3.38) (3.91)

Boom 14’ 1” (4.30 m)

Arm 6’ 5” (1.98 m)

BucketPCSA: 0.60 yd3

(0.46 m3)CECE: 0.52 yd3

(0.40 m3)

Shoes 28” (700 mm)

Conditions ft (m)18’5”(5.61) 20’8”(6.31)22’2”(6.76)23’1”(7.02)23’4”(7.10)22’11”(7.01)22’2”(6.75)20’7”(6.30)18’4”(5.58)

(5.96)21’8”(6.62)23’2”(7.05)23’11”(7.29)24’2”(7.37)23’11”(7.29)23’1”(7.04)21’7”(6.61)19’5”(5.93)

*2.34 *2.34(1.06) (1.06)

*5.07 *5.07 *2.23 *2.23(2.30) (2.30) (1.01) (1.01)

*5.53 *5.53 *5.42 *5.42 *4.25 *4.25 *2.18 *2.18(2.51) (2.51) (2.46) (2.46) (1.93) (1.93) (0.99) (0.99)

*8.40 *8.40 *6.88 *6.88 5.86 *6.11 4.30 *5.64 *2.20 *2.20(3.81) (3.81) (3.12) (3.12) (2.66) (2.77) (1.95) (2.56) (1.00) (1.00)

8.02 *8.58 5.64 *6.99 4.19 *6.13 *2.31 *2.31(3.64) (3.89) (2.56) (3.17) (1.90) (2.78) (1.05) (1.05)7.63 *10.10 5.42 *7.85 4.06 6.13 *2.47 *2.47

(3.46) (4.58) (2.46) (3.56) (1.84) (2.78) (1.12) (1.12)*11.38 *11.38 7.39 *10.98 5.27 8.02 3.97 6.02 *2.73 *2.73(5.16) (5.16) (3.35) (4.98) (2.39) (3.64) (1.80) (2.73) (1.24) (1.24)

*7.43 *7.43 11.62 *15.04 7.28 *11.13 5.18 7.94 3.92 5.97 *3.15 *3.15(3.37) (3.37) (5.27) (6.82) (3.30) (5.05) (2.35) (3.60) (1.78) (2.71) (1.43) (1.43)*13.84 *13.84 11.68 *13.93 7.28 *10.63 5.16 7.91 *3.86 *3.86(6.28) (6.28) (5.30) (6.32) (3.30) (4.82) (2.34) (3.59) (1.75) (1.75)*15.61 *15.61 11.86 *11.97 7.36 *9.26 5.25 *6.94(7.08) (7.08) (5.38) (5.43) (3.34) (4.20) (2.38) (3.15)

19 ft 8 in (6 m)

16 ft 5 in (5 m)

13 ft 1 in (4 m)

9 ft 10 in (3 m)

6 ft 7 in (2 m )

3 ft 3 in (1 m )

0 ft (Ground)

-3 ft 3 in (-1 m)

-6 ft 7 in (-2 m)

-9 ft 10 in (-3 m)

Boom 14’ 1” (4.30 m)

Arm 7’ 5” (2.29 m)

BucketPCSA: 0.60 yd3

(0.46 m3)CECE: 0.52 yd3

(0.40 m3)Shoes 28”

(700 mm)

*3.92 *3.92 *2.12 *2.12(1.78) (1.78) (0.96) (0.96)*4.30 *4.30 *3.42 *3.42 *2.03 *2.03(1.95) (1.95) (1.55) (1.55) (0.92) (0.92)*4.63 *4.63 *4.41 *4.41 *2.01 *2.01(2.10) (2.10) (2.00) (2.00) (0.91) (0.91)

*5.51 *5.51 *5.36 *5.36 4.39 *5.11 *3.15 *3.15 *2.05 *2.05(2.50) (2.50) (2.43) (2.43) (1.99) (2.32) (1.43) (1.43) (0.93) (0.93)

*10.03 *10.03 *7.52 *7.52 5.75 *6.33 4.25 *5.64 3.24 *4.03 *2.14 *2.14(4.55) (4.55) (3.41) (3.41) (2.61) (2.87) (1.93) (2.56) (1.47) (1.83) (0.97) (0.97)12.01 *13.10 7.78 *9.26 5.51 7.32 4.10 6.19 3.15 *4.54 *2.29 *2.29(5.45) (5.94) (3.53) (4.20) (2.50) (3.32) (1.86) (2.81) (1.43) (2.06) (1.04) (1.04)11.73 *14.24 7.45 *10.52 5.29 8.07 3.99 6.06 3.09 *4.50 *2.54 *2.54(5.32) (6.46) (3.38) (4.77) (2.40) (3.66) (1.81) (2.75) (1.40) (2.04) (1.15) (1.15)

*7.65 *7.65 11.55 *15.34 7.28 *11.07 5.16 7.94 3.90 5.95 *2.91 *2.91(3.47) (3.47) (5.24) (6.96) (3.30) (5.02) (2.34) (3.60) (1.77) (2.70) (1.32) (1.32)*12.13 *12.13 11.53 *14.75) 7.21 *10.93 5.11 7.87 3.88 5.93 3.46 *3.51(5.50) (5.50) (5.23) (6.69) (3.27) (4.96) (2.32) (3.57) (1.76) (2.69) (1.57) (1.59)*18.21 *18.21 11.64 *13.32 7.25 *10.07 5.14 *7.80 4.41 *4.63(8.26) (8.26) (5.28) (6.04) (3.29) (4.57) (2.33) (3.54) (2.00) (2.10)*14.35 *14.35 *10.71 *10.71 7.41 *8.13(6.51) (6.51) (4.86) (4.86) (3.36) (3.69)

19 ft 8 in (6 m)

16 ft 5 in (5 m)

13 ft 1 in (4 m)

9 ft 10 in (3 m)

6 ft 7 in (2 m )

3 ft 3 in (1 m )

0 ft (Ground)

-3 ft 3 in (-1 m)

-6 ft 7 in (-2 m)

-9 ft 10 in (-3 m)

-13 ft 1 in (-4 m)

Boom 14’ 1” (4.30 m)

Arm 9’ 3” (2.83 m)

BucketPCSA: 0.52 yd3

(0.40 m3)CECE: 0.43 yd3

(0.39 m3)

Shoes 28” (700 mm)

21’6”(6.56)23’6”(7.16)24’9”(7.55)25’6”(7.78)25’8”(7.85)25’8”(7.77)24’8”(7.54)23’5”(7.14)21’5”(6.54)18’6”(5.64)

19’6”

a: Load radiusb: Load point heightc: Lifting capacity

Rating over sideor 360 degrees

Ratingover front

UnitMeasure:1,000 lb

(1 000 kg)

Notes: 1. Ratings are based on SAE J1097.2. Lifting capacity of the Super EX Series does not exceed 75% of tipping load with the

machine on firm, level ground or 87% of full hydraulic capacity.3. The load point is a hook (not standard equipment) loaded on the back of the bucket.4. * Indicates load limited by hydraulic capacity.5. English measurements are rounded based on metric originals.

Loadpointheight

19 ft 8 in (6 m)

16 ft 5 in (5 m)

13 ft 1 in (4 m)

9 ft 10 in (3 m)

6 ft 7 in (2 m)

3 ft 3 in (1 m)

0 ft (Ground)

-3 ft 3 in (-1 m)

-6 ft 7 in (-2 m)

- 9 ft 10 in (-3 m)

Hitachi of North AmericaHitachi excavators, mini excavators, mining shovels, cranes and forestry machines are the best you can buy. Our commitment to superior product support is equally outstanding.

• 37 Dealers• 194 Dealer Facilities• Parts Warehouses

– Houston, Texas– Vancouver, B.C.

• Manufacturing Plants– Tsuchiura, Japan– Tierra, Japan– Kernersville,

North Carolina– Langley, B.C.– Saltillo, Mexico

HCMA/C 110-5/01 5MHitachi Construction & Mining Division - Americas 1515 5th Avenue • Moline, IL 61265