Optical benefits associated with PrismaLED technology. Enhanced Lumen Maintenance due to self cleaning design. Patented design delivering genuine solution for new and retrofit solutions to replace 400W HID. Delivers a system life of 100,000 hours.

Value Proposition

Application

Rail Logistics Sports Retail

Exhibition Halls

Prismatic Glass Optics

Thermal Shock

Chemical Resistance

Low Dirt Accumulation Recyclable

Temp Resistance

Longevity

UV Impervious

Why Glass?

Lumen Maintenance

Discomfort Glare

Optical Performance

Colour Consistency

Minimising LED Failure

Maximising Optical Control

Optical Performance

Broad Distribution 1.2:1 to 1.7:1

Extensive Distribution 1.7:1 to 2.2:1

Intensive Distribution 0.9:1 to 1.2:1

Focused Distribution 0.7:1 to 0.9:1

System Longevity

System Life of over 100,000 hours at L70F10.

Product Specification

70CRI or 80CRI options available.

Lumen packages ranging from 20,000 to 39,000 with efficacies of 101 lpw. IP20 luminaire with IP65 optical chamber. TA -20oC to +45oC. Wire guard and safety chain attachment options. Single or Twin Suspension.

Emergency

No emergency kit available with the power to run the LED’s. Limited space within the luminaire.

EMCA Recap Three hours non-maintained emergency solution.

Emergency ballast with DALI as standard and integrated battery

pack (12V/340mA)

Emergency indicator built into

cover plate.

Safety chain attachment included

as standard.

Performance Data

Product Code

Drive Current

(mA)

Lumens+ Power Consumption

(W)*

Luminaire Performance

(LPW)

Power Factor

(Ø)

HAL.L3947 700mA c.38500 385 100 TBC

HAL.L3247 700mA c.31869 308 103 TBC

HAL.L2247 700mA c.22106 230 94 TBC

HAL.L3448 700mA c.34000 385 89 TBC

HAL.L2748 700mA c.27000 308 87 TBC

HAL.L2048 700mA c.20000 235 85 TBC

* Subject to final testing +Dependent on distribution.

Performance Data

40

50

60

70

80

90

100

25oC 35oC 40oC 45oC

Life

(000's

)

Ambient Temp

System LED

Estimated system rated life of 100,000 hrs L70F10 @ TA 25oC.

LED life of >100,000 hours

New Build Performance Example

Parameters Dirty environment Reflectance’s C50%, W30%, F10% Room dimensions (m): Length: 50, Width: 30, Height: 9. Luminaire Installation height of 9m. Total area 450m2 Target Lux : 500 , Uniformity : >0.60 as per BSEN12464-1 2011’

28 luminaires 45 luminaires

Retrofit Performance Example

Existing Luminaires 84 400W HIE High bay luminaire Luminous flux: 32,500 lm Luminous efficiency: 75 lm/W or 50 6x80 Whitecroft Fluorescent Luminous flux: 39300 lm Luminous efficiency: 74 lm/W

HALOPRISM Retrofit 50 HALOPRISM high bay luminaires Luminous flux: c24,000 lm Luminous efficiency: 102 lm/W

Retrofit Choosing replacement method

Optimised replacement One-for-One replacement

Retrofit Using the right Maintenance Factor for every application

𝐌𝐅 = 𝐋𝐋𝐌𝐅 × 𝐋𝐌𝐅 × 𝐑𝐒𝐌𝐅

MF LLMFLMF (10000

hours)

RSMF ( 2yrs

cleaning)

Haloprism 0.91 1 0.97 0.94

Gentlespace 0.81 1 0.86 0.94

Durosite 0.81 1 0.86 0.94

Litex 0.81 1 0.86 0.94

Cooper high bay 0.74 1 0.79 0.94

Zumtobel Graf 0.81 1 0.86 0.94

PLS HTPSP 0.73 0.92 0.982 0.81

PPS HTPSP 0.85 0.92 0.982 0.94

I-Beam 0.81 1 0.86 0.94

Proteon 0.81 1 0.86 0.94

T5 80W 0.50 0.9 0.59 0.94

HIE 400W (magnetic) 0.37 0.66 0.59 0.94

• Every installation has MF 1 (100%) at time 00:00

• MF can emphasize the importance of a quality, long lasting luminaire

• MF affects the quantities of the luminaires, especially when there is high depreciation.

• The MF used by competitor should be known and validated.

𝐋amp 𝐋umen 𝐌aintenance 𝐅actor

𝐋uminaire 𝐌aintenance 𝐅actor

𝐑oom 𝐒urface 𝐌aintenance 𝐅actor

Controlling Haloprism DALI controlled

1. Well established protocol in the market

2. Compatible with any standard DALI system

3. No necessity for a bespoke control solution unless required

4. 3 addresses / luminaire more demanding wiring and commissioning.

5. The design must be always assessed from a controls point of view before giving

budget cost.

6. Any last minute changes should always be reported to verify they are within the

control system’s potential.

7. Avoid frequent on/off switching.

8. A single driver model will be released in the near future (currently being tested)

Performance Amortisation on Retrofit Installation Including luminaire and running cost

Performance Amortisation on Retrofit Installation Including luminaire and running cost

Exceptional vertical illumination Improved Light Control Better Uniformity Low Glare

Increase in task performance

Reduction in number

of rejects

Accident Reduction

=

Analogue Fast Dim 1-10V (.ANF). DALI control (3 x DALI addresses) Constant Lumen Output 70%, 80% & 90% maintaining 50% of the LED light engines or LED’s. Standalone high-bay analogue presence detector PIR kit for 360o and aisle.

Controls

HEL.PIR

Key Competitors

Key Competitors

Product Lumen Range

LPW CRI Lifetime@ L70

Ta IP Rating

Controls Option

DALI/1-10V

12,600 – 28,000

90 - 100 70 & 80

50,000 TBC IP65 DALI

11,000 - 25,000

80-102 70 100000 -40oC

to 65oC IP66 No

10,000 - 24,000

82 – 93 75 75,000 -30oC

to 45oC IP65 DALI

10,300 – 20,700

95-105 75 50,000 -30oC

to 40oC IP65 DALI

20,000 – 39,000

85-101 70 & 80

100000 -20oC

to 45oC

IP20/ IP65 (optic)

DALI and 1-10V

Product Positioning

Product Positioning

- Passive convective cooling - Light weight and rigid construction - Direct replacement for fluorescent luminaires - 100,000 system life but limited lumen maintenance

- Premium MIRO Silver reflector system - Dynamic temperature sensing and control. - Pluggable and removable driver tray. - Luminaire designed to conduct and convect heat. - 25,000 hours system life.

- Unique prismatic glass lens with LED technology - PrismaLED. - Highest lumen package available. - Advanced lumen Maintenance. - Thermal management delivers a system life of 100,000. - Sealed optical chamber.

Marketing Support

Marketing Support