Embed Size (px)
Citation preview
sam
os®
pro
samos® pro Compact safety control in the network
Safely integrated.0880.1 MC 03/13
2
samos net
samos® pro
samos®net
samos pro is the most compact and fastest modular compact safety control for the monitoring and control of mechanical and system engineering applications for up to Category 4 (EN954-1), PLe (EN13849-1) and SIL3 (EN62061). samos pro helps you to implement extensive and complex applications with the highest safety requirements where conventional relay tech-nology reaches its limits.
The basic features:
• Ease of use• High level of convenience
(diagnosis, logic functions)• High level of safety combined
with decisive cost efficiency
Safe monitoring of complex systems thanks to:
• Up to 96 inputs• Up to 48 outputs• Up to 2 gateways• Additional relay expansions
3
samos® pro
samos net modular system concepts with comprehensive safety functions can be implemented through safe interconnection. Up to four systems can communicate with each other safely.
Safe communication
Modular expandability in systems:
The modular design enables efficient use even for small applications. Even in its most compact configuration, up to four safety switching devices can be replaced (at a width of 45 mm). This significantly reduces the amount of cabling required.
4
CPU
8 ms
IN OUT
samos® pro
The fast shut-off function enables a reaction time of 8 ms. The fast reaction time increases safety and enables shorter distances (e.g. according to EN 13855) between the sensors (light curtain) and the danger area.
So you also save costs and space here.
The tested outputs enable Category 4 via a single channel.
T his saves outputs and their associated costs, as well as space in the control cabinet.
The modular design also enables expansion at a later stage and therefore flexible planning with a reduced variety of module versions. Easier handling and logistics.
You only pay for what you really need.
The simulation of the programmed logic enables initial testing without hardware. Software errors can be excluded as early as during start-up.
This saves time during the validation of the program.
The software is available online worldwide and in several languages without a license. You are always up-to-date, and service tech-nicians around the globe benefit both from this and from new functions in the future
Programming is simple and intuitive and is carried out via certified function blocks. Programming errors are detected and located.
This saves time during configuration.
The benefits: Safety, convenience and efficiency
If requiered even output testpulses can be deactivated by software configuration.
Drive controls and small valves can be operated failure-free.
5
Logic functions for the monitoring of valves and contactors enable a pro-active diagnosis.Necessary maintenance operations can be indicated at an early stage.
Downtimes are minimized.
A comprehensive function block library is available. Repeated functions can be stored as individual blocks. Blocks for muting and pressing mean that separate hardware is no longer necessary.
Inflexible hardware is replaced by para-meterizable function blocks.
All standard sensors can be connected, irrespective of manufacturer. samos pro adjusts itself to every sensor.
Expensive, special evaluation units are no longer necessary.
A comprehensive report is generated automati-cally. The good logic readability also facilitates subsequent expansion and the validation of safety functions.
This supports standard-compliant documentation.
Gateways enable bi-directional communication (50 Byte). Even for varying control environments, this means: Safety technology can be generated and then documented once.
Integration into various field buses is possible without any difficulty.
Application in accordance with EN ISO 13849-1, EN 62061, EN 61508
Application in accordance with EN 81-1
Application in accordance with EN 50156-1
Application in accordance with EN 61511
6
An error memory in the controller also enables the subsequent readout of error conditions (discrepancy times, procedure errors, crossovers); a time stamp is specified. Self-defined messages are also possible.
This facilitates troubleshooting, even in the event of a manipulation attempt.
The use of Ethernet gateways enables remote maintenance and remote programming.
Technicians are no longer required to make expensive, time-consuming trips.
Pluggable coded screw terminals and spring-clamp terminals are available for connection.
This saves time when it comes to installation and servicing.
The memory plug contains the program protected by you and remains firmly wired in the control cabinet, so it cannot get lost.
This facilitates servicing.
Remote maintenance / remote programming
Signals that are physically not present are ge- nerated online by a forcing mode. This prevents bypassed safety switches during start-up.
This increases safety and saves time.
The Wieland SISTEMA library enables the easy selection of samos pro modules and therefore the calculation of the PL reached according to EN13849-1.
The team at Wieland will, of course, also be happy to support you when it comes to implementing applications.
76
SP-SCON-P1-K 24 V DC R1.190.0010.0
SP-SCON-NET-P1-K 24 V DC R1.190.0020.0
SP-MEMORY – R1.190.0080.0
SP-SDIO84-P1-K-A 24 V DC R1.190.0030.0
SP-SDIO84-P1-K-C 24 V DC R1.190.0040.0
SP-SDI8-P1-K-A 24 V DC R1.190.0050.0
SP-SDI8-P1-K-C 24 V DC R1.190.0060.0
SP-PROFIBUS-DP 24 V DC R1.190.0190.0
SP-CANopen 24 V DC R1.190.0210.0
SP-EN-MOD 24 V DC R1.190.0130.0
SP-EN-PN 24 V DC R1.190.0140.0
SP-EN-IP 24 V DC R1.190.0150.0
SP-PRO-STARTER-SET – R1.190.0100.0
SNS 4084K-A 24 V DC R1.188.3480.0
SNS 4084K-C 24 V DC R1.188.3490.0
SA-OR-S1-4RK-A 24 V DC R1.180.0080.0
SA-OR-S1-4RK-C 24 V DC R1.180.0430.0
SA-OR-S2-2RK-A 24 V DC R1.180.0320.0
SA-OR-S2-2RK-C 24 V DC R1.180.0440.0
SP-CABLE1 – R1.190.0090.0
SP-CONVERTER – – R1.190.0250.0
SP-CABLE3 – – 00.102.5202.0
WKFN 2,5 E/35 GO-URL
– – 56.703.8755.9
APFN 2,5 E/35 – – 07.312.7355.0
samos® pro
* Further accessories available on request.
Overview of devices | Order no.
Type Nominal voltage Remark Terminals Order no.
Controller module(without program memory)
–
Controller module, interconnectable (without program memory)
–
Program memory –
Input-output module8 inputs / 4 outputs
Screw terminals, pluggable
Input-output module8 inputs / 4 outputs
Spring-clamp terminals, pluggable
Input module8 inputs
Screw terminals, pluggable
Input module8 inputs
Spring-clamp terminals, pluggable
PROFIBUS-DPFieldbus gateway
–
SP-CANopen Fieldbus gateway
–
MODBUS/TCPEthernet gateway
–
PROFINET-IOEthernet gateway
–
ETHERNET/IPEthernet gateway
–
Contents: SP-SCON, SP-SDIO, SP-PLAN, SP-MEMORY, SP-CABLE1
–
Standstill monitor0.5 - 99 Hz
Screw terminals, pluggable
Standstill monitor0.5 - 99 Hz
Spring-clamp terminals, pluggable
Relay output module2 x 2 safe relay outputs
Screw terminals, pluggable
Relay output module2 x 2 safe relay outputs
Spring-clamp terminals, pluggable
Relay output module1 x 2 safe relay outputs
Screw terminals, pluggable
Relay output module1 x 2 safe relay outputs
Spring-clamp terminals, pluggable
Accessories *
PC connecting cable, M8 – RS232
–
USB – RS232 converter –
CAN cabel 2 x 2 x 0.34 mm2, shielded
–
fasis – Multi-tier block with diodes
–
fasis - End plate –
sam
os®
pro
Wieland worldwide
Company Headquarters: Wieland Electric GmbH Brennerstraße 10 – 14 96052 Bamberg, Germany
Sales and Marketing Center: Wieland Electric GmbH Benzstraße 9 96052 Bamberg, Germany
Phone +49 9 51 93 24-0 Fax +49 9 51 93 24-198 www.wieland-electric.com [email protected]
0880.1 MC 03/13
Informational brochures for ordering and downloading from our websites For technical details use our eCatalog on our website at https://eshop.wieland-electric.com Subject to technical modifications! gesis®, podis®, samos® are registered trademarks of Wieland Electric GmbH
USAWieland Electric Inc. North American Headquarters2889 Brighton RoadOakville, Ontario L6H 6C9Phone +1 905 8298414 Fax +1 905 8298413 www.wielandinc.com
CANADAWieland Electric Inc.North American Headquarters2889 Brighton RoadOakville, Ontario L6H 6C9Phone +1 905 8298414 Fax +1 905 8298413 www.wieland-electric.ca
GREAT BRITAINWieland Electric Ltd.Riverside Business Centre, Walnut Tree CloseGB-Guildford/Surrey GU1 4UG Phone +44 1483 531213Fax +44 1483 505029 [email protected]
FRANCEWieland Electric SARL.Le Céramê Hall 647, avenue des GenottesCS 48313,95803 Cergy-Pontoise CedexPhone +33 1 30150707Fax +33 1 30150714 [email protected]
SPAINWieland Electric S.L.C/ Maria Auxiliadora 2 bajosE-08017 BarcelonaPhone +34 93 2523820Fax +34 93 2523825 [email protected]
ITALYWieland Electric S.r.l.Via Edison, 209I-20019 Settimo MilanesePhone +39 02 48916357Fax +39 02 48920685 [email protected]
POLAND Wieland Electric Sp. Zo.o.Św. Antoniego 862-080 SwadzimPhone +48 61 2225400 Fax +48 61 8407166 [email protected]
DENMARKWieland Electric A/SVallørækken 26DK-4600 KøgePhone +45 70 266635Fax +45 70 [email protected]
CHINAWieland Electric TradingUnit 2703 International Soho City 889 Renmin RoadHuang Pu DistrictPRC-Shanghai 200010Phone +86 21 63555833Fax +86 21 63550090 [email protected]
BELGIUMATEM – Wieland Electric NVBedrijvenpark De Veert 4B-2830 WillebroekPhone +32 3 8661800Fax +32 3 [email protected]
Agencies: You can reach us worldwide in more than 40 countries. Find the contact adress at: www.wieland-electric.com
Our subsidiaries
