VMware.Prepking.VCP-510.v2012-01-06.by.WareWolf … · Moved Min/Max to a Exam B. 1. Removed Dupes 2. Added only details to questionable answers 3. Exam A = Real Questions 4. Exam

VCP-510-PrepKing-300q_vSphereKing_v10

Number: 000-000Passing Score: 600Time Limit: 120 minFile Version: 6.01

http://www.gratisexam.com/

VMware VCP-510Original:VMware Certified Professional on vSphere 5PrepKing Version: 6.01300 Q&A

Updates:Version : 6.1Updated: 1-5-2011 by vSphere King converted to VCE and PFD. Removed Watermarks and fixed grammatical and answered questions. 1 question changedbecause it was wrong. More are wrong but for the most part I give this dump my blessing. Certcollection is down for Maintenance but remember when it is up to post to this thread for me to update and make any recommended changes. Also need to adddescriptions to all the questions.Thanks to the ones who shared this file with me. http://certcollection.org/forum/forum/153-vmware-shares/

Questions Corrected:

Doubts: 161 was answer C old dump. 163 and 159 are the same but with answers in different spots. Deleted 163.Details: Modified 3 answer questions (looking off old dumps). Multiple Answer questions that should have 4 answers should have 5 > added details to thesequestions for dicussing. Moved Min/Max to a Exam B.

1. Removed Dupes2. Added only details to questionable answers3. Exam A = Real Questions4. Exam B = Min/Max Questions

Exam A

QUESTION 1Using the vSphere Client from a remote PC, an administrator wants to connect a virtual machine and burn a DVD.What is true about this scenario?

A. The host device must be used. The virtual machine must be configured for Host Device and Passthrough IDE mode.B. The remote client device can be used. The virtual machine must be configured for Host Device and Emulate IDE mode.C. The host device must be used. The virtual machine must be configured for Host device and Emulate IDE mode.D. The remote client device can be used. The virtual machine must be configured for Host Device and Passthrough IDE mode.

Correct Answer: DSection: (none)Explanation

Explanation/Reference:

QUESTION 2What is the traffic shaping adjustment?

A. Minimum bandwidth adjusted in kbpsB. Peak bandwidth adjusted in MbpsC. Burst time in secondsD. Burst size in KB



QUESTION 3An administrator receives a complaint that a virtual machine is performing poorly. The user attributes the issue to poor storage performance. If the storage array Isthe bottleneck, which two counters would be higher than normal? (Choose two)

A. Average device latency per command, in milliseconds(DAVG per cmd)B. Average ESXi VMKernel latency per command, in milliseconds (KAVG per cmd)C. Average virtual machine operating system latency per command, in milliseconds (GAVG per cmd)

D. Number of SCSI reservation conflicts per second (CONS per second)

Correct Answer: ADSection: (none)Explanation


QUESTION 4In the vSphere Client, the Resource Allocation tab for virtual machines displays host memory and guest memory. Which two statements best describe these terms?(Choose two)

A. Guest memory is the amount of physical memory that has been allocated to a virtual machineB. Host memory is the amount of physical memory that has been allocated to a virtual machine.C. Guest memory is the memory usage of a virtual machine.D. Host memory is the memory usage of a virtual machine.

Correct Answer: BCSection: (none)Explanation


QUESTION 5Which Resource management technique can be used to relieve a network bottleneck by a Virtual machine with occasional high outbound network activity?


A. Apply traffic shaping to the port group that contains the virtual machine.B. Convert traffic shaping from a nNetwork Standard Switch to a vNetwork Distributed Switch.C. Apply traffic to the other virtual machines in the same port group.

D. Apply traffic to the virtual machine with high activity.

Correct Answer: ASection: (none)Explanation


QUESTION 6A new LUN has been presented to two ESXi hosts: ESXiA and ESXiB. The LUN can be seenFrom both servers. A vSphere Client attached to ESXiB is used to create a BMFS datastore on the LUN.The new datastore is visible on ESXiB but not ESXiA.

Which step must be taken to make the datastore visible to ESXiA?

A. Perform a rescan operation on ESXiB.B. Reboot ESXiA.C. Perform a rescan operation on ESXiAD. Modify LUN masking settings on the the storage array.

Correct Answer: CSection: (none)Explanation


QUESTION 7Which of the following is not a supported location for a host diagnostic partition?

A. Private local storageB. Private SAN storageC. Shared SAN storageD. Shared local storage



QUESTION 8After an upgrade from ESXi4.0 to ESXi5.0 you are unable to putty your hosts. What could have caused this?

A. The SSH port in ESXi 5.0 has changed to 443 for added security.B. SSH is not available with ESXi5.0, it is only available with ESX5.0C. SSH is always disabled after an upgrade or clean installation.D. SSH configuration is not migrated for ESX 4.x hosts or ESXi 4.0 hosts. For these hosts, SSH access is disabled during the upgrade or migration process.



QUESTION 9Which of the following is no longer available with vSphere 5?

A. vCenterB. vSphere ClientC. PowerCLID. ESX



QUESTION 10When you are configuring the vSwitch NIC teaming policy, what happens when the Notify Switches option is set to yes?

A. The physical switch is notified when the virtual NIC link state changes.B. The physical switch is notified when the location of a virtual NIC changes.

C. The virtual switch is notified when the location of a physical NIC changes.D. The virtual switch is notified when the physical NIC link state changes.

Correct Answer: BSection: (none)Explanation


QUESTION 11What are the two network load-balancing policies for a vNetwork Distributed Switch? (Choose two)

A. Route based on source destination MAC hashB. Route using Round RobinC. Route based on the originating virtual port IDD. Route based on IP hash

Correct Answer: ACSection: (none)Explanation


QUESTION 12You've been asked to make sure that you guarantee a certain level of capacity, performance, availability, redundancy for your virtual machines storage. Whatfeature of vSphere 5 would you use to ensure you can meet that request?

A. Profile-Driven StorageB. VAAIC. sDRS/vMotionD. Capacity Planner



QUESTION 13Which new feature of vSphere 5 is used to create ESXi installation images with a customized set of updates, patches and drivers?

A. Auto DeployB. Host ProfilesC. esxcliD. Image Builder



QUESTION 14A vSphere 5 environment has an ESXi 5 x host configured to boot from a Software iSCSI adapter.

What is the expected outcome if the administrator attempts to disable the iSCSI Software adapter?

A. The adapter will be disabled, but is re-enabled the next time the host boots up.B. The adapter will be disabled and the host will not boot the next time the host boots upC. The adapter will not be disabled and the vSphere Client will return an error messageD. The adapter will be enabled, but the host will boot into troubleshooting mode the next time the host boots



QUESTION 15An administrator is performing maintenance on a storage array used by a DRS cluster. The administrator wants to disable alarm actions for the cluster while themaintenance is taking place.

What procedure will accomplish this task?

A. Go to the alarms tab for each ESXi host in the DRS cluster. Locate storage-related alarms. Right click and disable each alarmB. Right-click the DRS cluster and select Alarm and Disable Alarm ActionsC. Right-click the datacenter containing the DRS cluster. Select Alarm Disable Alarm ActionsD. Go to the alarms tab for the datacenter containing DRS cluster. Locate the storage-related alarms.

Right-click and disable each alarm.



QUESTION 16An administrator is considering deploying a new storage array for a vSphere 5 implementation. If the array supports the vStorage APIs for array integration (VAAI),which two tasks can be performed directly by the array? (Choose two)

A. creating VMFS datastoresB. cloning virtual machines and templatesC. migrating virtual machines using Storage vMotionD. creating NFS datastores



QUESTION 17Which feature of vSphere 5 can be used to reduce virtual machine memory overhead?

A. Memory ReservationsB. Swap to HostC. SplitRXD. VMX Swap



QUESTION 18A user attempts a remote SSH connection to a newly installed ESXi 5.x host to execute some commands. The SSH connection attempts fails, through the user isable to receive a ICMP ping back from the host.

Which two connections might cause the issue? (Choose two)

A. The shell timeout is set to low.B. The ParentRootLogin option is set to False.C. The SSH service is disabled on the host by default.D. The Esxi firewall blocks the SSH protocol by default.

Correct Answer: CDSection: (none)Explanation


QUESTION 19After an upgrade from ESX/ESXi 4.1 to ESXi 5.0, your monitoring department are reporting that they have stopped receiving Syslog data from all of the ESXi hosts.What could be the problem?

A. Tech Support Mode is disable by default after an upgrade to ESXi 5.0 stopping all traffic on all portsB. Custom ports that were opened by using the ESX/ESXi 4.1 esxcfg-firewall command do not get copied during the upgrade to ESXi 5.0.C. ESXi 5.0 cannot send logs to Syslog servers.D. Custom ports that were opened by using the ESX/ESXi 4.1 esxcfg-firewall command do not remain open after the upgrade to ESXi 5.0



QUESTION 20A company runs several instances of an application that requires large amounts of memory. Which three metrics are checked to diagnose a meory bottleneck at theESXi host level? (Choose three)

A. MEMSZB. MEMCTLC. SWAPD. ZIPE. MCILTGT

Correct Answer: ABCSection: (none)Explanation


QUESTION 21What protocol is used by an ESXi host to communicate with NAS devices?

A. SMBB. CIFSC. iSCSID. NFS



QUESTION 22In an HA cluster after an initial election process, host are either:

A. Primary or SecondaryB. King or Queen

C. Live or StandbyD. Master or Slave



QUESTION 23The upgrade procedure from VMFS-3 to VMFS-5 will require downtime of that datastore?

A. TrueB. False



QUESTION 24Which of the following installation methods installs the ESXi image directly into the Host memory ?

A. Scripted ESXi InstallationB. Interactive ESXi InstallationC. Upgrade via VMware Update ManagerD. vSphere Auto Deploy ESXi Installation Option



QUESTION 25

A network administrator has discovered a failure that has affected accessibility to the management network As a result, none clusters are able to communicate onthis network. The cluster was configured with default settings.

What happens as a result of the failure?

A. All VMs on all hosts in the cluster are unaffected.B. The VMs will be powered off on slave hosts that cannot communicate with the master on the affected network.C. The VMs will be powered down on all hosts in the cluster



QUESTION 26Which of the following is a requirement for vCenter?

A. A DHCP IP addressB. A static IP addressC. A valid (internal) domain name system (DNS) registration.



QUESTION 27ACME Logging Inc. has been using the vSphere Web Client template to five-node vSphere 5 cluster. After deploying a new template, the resulting virtual machine isnot able to connect the deployment network to which it was assigned. When deploying another template, the message in the exhibit is show.

Based on the information, what is the likely problem ?

A. Host esxi2 does not have >network uplink attached to the Production vSwitch.B. Host esxi2 does not have the Production network created to bind to.C. DRS must be enabled if you are deploying templates into a cluster.D. A vDS must be configured it you are deploying templates into a cluster.

Correct Answer: BSection: (none)

Explanation


QUESTION 28Which vSphere feature provides dynamic allocation of storage capacity?

A. vStorage APIs/VCBB. ThinappC. sDRSD. vStorage Thin Provisioning



QUESTION 29It is possible to Storage vMotion virtual machines that have snapshots?

A. TrueB. False



QUESTION 30An administrator wishes to send traffic from a vNetwork Distributed Switch to a collector virtual machine for analysis. vSphere 5 has been deployed in thedatacenter.


Which two configurations will enable the functionality? (Choose two)

A. The source and target virtual machines must be on the same vNetwork Switch.B. The source and target virtual machines must both be on a vNetwork Switch, but can be on any vDS datacenter.C. The port group on the distributed port must have Promiscuous Mode enabled.D. The port group on distributed port must have NetFlow enabled.

Correct Answer: BDSection: (none)Explanation


QUESTION 31An administrator has deployed a vCenter Server Appliance to manage a virtual environment. The administrator has been asked to develop a plan for handling majorupgrades to the appliance.

What should be included in the upgrade plan ?

A. Utilize vCenter Configuration Manager to upgrade the vCenter Server Appliance in place.B. Install a new vCenter Server Appliance and import the information from the existing vCenter Server Appliance.C. Install a new vCenter Server Appliance over the existing vCenter Server Appliance.D. Utilize Update Manager to upgrade the vCenter Server Appliance in place.



QUESTION 32Based on the exhibit, what is the appropriate action to disable a path?

A. Paths cannot be disabled in this interfaceB. Right-click the path you want to disable and then select disableC. Click, the path you want to disable then press DeleteD. Double-click the new path you wish to make active. The existing path will be disabled



QUESTION 33Which two types of information can be obtained about a VMFS datastore using the Storage Views tab in the vSphere Client? (Choose two)

A. Multipathing status for the datastoreB. vmhba adapter used to access the datastoreC. Space used in the datastoreD. Runtime name of the datastore



QUESTION 34Which of the followingdvPort binding types have been removed in vSphere5?

A. Ephemeral BindingB. Static BindingC. Dynamic Binding

Correct Answer: C

Section: (none)Explanation


QUESTION 35What are the block size options for a new created VMFS-5 VMDK?

A. 1MB, 2MB, 4MB, 8MBB. 1MBC. 4MBD. 8MB



QUESTION 36What are the 4 VM Restart Priority options available on an HA cluster?

A. Enabled, Small, Medium, Largest, 2nd, 3rd, 4th

B. 1st Tier, 2nd Tier, 3rd Tier, Best EffortC. Priority, 2D. Disabled, Low, Medium, High



QUESTION 37SSH operates on which port?

A. 21B. 22C. 23D. 25



QUESTION 38What are three valid objects to place in a vApp? (Choose three)

A. FoldersB. HostsC. Resource poolsD. vAppsE. Virtual machines

Correct Answer: CDESection: (none)Explanation


QUESTION 39VMware vCenter site Recovery Manager requires which two VMware products as part of the solution?

A. vSphere HAB. VMware ESXiC. VMware vCenter ServerD. VMware Data Recovery

Correct Answer: BC



QUESTION 40What do changes made to resources available in a parent pool affect in a resource pool hierarchy?

A. Child poolsB. Sibling poolsC. Sibling and child poolsD. Root resource pools



QUESTION 41ACME catering Services is using esx top to troubleshoot a problem with one of their ESXi hosts. Host disconnection from vCenter server as well as sluggishperform when performing tasks on the host have been observed.

Based on the output in tin-exhibit, what three corrective actions can be taken to resolve the issue?(Choose three)

A. Increase the CPU Reservation on file server01B. Decrease the number of vCPUs in use on this hostC. Migrate the File Server00 virtual machine to another hostD. Increase the number of Physical CPUs in the hostE. Increase the amount of RAM in the host because swapping is occuring

Correct Answer: BCDSection: (none)Explanation


QUESTION 42

The information shown in the exhibit must be configured to support which cluster feature?

A. HAB. DPMC. DRSD. EVC



QUESTION 43

Which two users are assigned the Administrator role at the ESX Server level by default?

A. root, administratorB. root, vpxaC. root, hostdD. root, vpxuser



QUESTION 44An administrator receives a call indicating users reported extremely slow access to virtual machines the previous evening. Access to virtual machines performs asexpected as checked by the administrator. Over the course of several days, the administrator continues to receive calls about the issue, which appears to occur atintermittent times each evening.

Which step can be taken to collect information about the issue?

A. Create a condition alarm to alert when Datastore Disk Usage (*) exceeds 70%B. Collect resxtop performance data in batch mode and analyze total number of I/O operations (CMDS/s) metricsC. Create an event alarm to alert when a storage device is disconnectedD. Collect resxtop performance data in batch mode and analyze average device latency (DAVG/cm-d) metrics



QUESTION 45An administrator has deployed vCenter Data Recovery and needs to create a de-duplication. Which three storage options can be used? (Choose three)

A. 1TB Raw Device Mapped diskB. 1TB virtual diskC. 1TB CIFS network share

D. 500GB CIFS network shareE. 2TB Raw Device Mapped disk

Correct Answer: ABDSection: (none)Explanation


QUESTION 46Where the VMware vSphere Storage Appliance manager (VSA manager) must be installed in a vSphere 5 environment?

A. On a standalone Windows machineB. The Vsa manager is installed as a separate virtual applianceC. On the vCenter Server SystemD. On the VMware vSphere Storage Appliance



QUESTION 47An administrator must decommission on a datastore.

Before unmounting the datastore, which three requirements must be fulfilled? (Choose three)

A. No virtual machines reside on the datastoreB. The datastore is not used for vSphere HA heartbeatC. The datastore must not have any contentsD. The datastore must not be a part of a datastore cluster.

Correct Answer: ABDSection: (none)Explanation


QUESTION 48Which three modules are optional components that can be added from the vCenter server installer? (Choose three)

A. VMware vCenter ESXi Dump CollectorB. VMware vCenter Storage MonitoringC. VMware vSphereWeb ClientD. VMware vCenter OrchestratorE. VMware vSphere Update Manager

Correct Answer: ACESection: (none)Explanation


QUESTION 49Which vSwitch port group policy setting allows packets to be created by a virtual machine with different source MAC addresses MAC address?

A. Promiscuous modeB. Traffic shapingC. Forged transmitsD. MAC address changes



QUESTION 50An administrato has been tasked with creating a vSphere Standard Switch (vSS) for an ESXi host with the following specifications:

1. 116 virtual machines will be connected to the switch

2. The switch wall have four uplinks configured for port-based load balancing

3. The switch will act as a secondary heartbeat network for HA

Which two statements are true about this configuration? (Choose two)

A. The configuration requires a Service Console PortB. The configuration requires a VMkernel portC. A vSS created with default settings in the vSphere Client is insufficient for this configurationD. A vSS created with 128 ports using the vSphere CLI is sufficient for this configuration



QUESTION 51Which two methods can be used to migrate a virtual machine from a vNetwork Standard to a vNetwork Distributed Switch? Choose two

A. Edit the virtual adapter settings for the ESXi host and select a dvPort group from the listB. Migrate the port group containing the virtual machine from a vNetwork Standard Switch using the Migrate Virtual machine networking optionC. Use the Migrate Virtual machine networking option to select the virtual machine from a list of virtual machinesD. Edit the Network Adapter settings for the virtual machine and select a dvPort group from the list



QUESTION 52Which tool defines the image profiles used with auto deploy?

A. the vSphere client via the image profiles management plug-inB. the vSphere power CLI image builder cmdletC. the vSphere CLI esxcfg-image utility

D. the vSphere CLI esxcli image add command



QUESTION 53By deafault, where do hosts deployed with VMware Auto Deploy store logs

A. first mounted LUNB. local diskC. vMAD. in memory



QUESTION 54After an upgrade from ESX4.x to ESX5.x you notice that when you run the following command via the vMA:"esxcfg-vswif-I" you notice that there are no configure vswif interfaces listed. Why would this be?

A. the service console is no longer available with vSphere 5. All vswif interfaces are removed during the upgradeB. during the upgrade process, vswif interfaces are disable by default, they'll need to be enable before they will be listedC. the wrong command is being used. "vicfg-vswif-I" is the correct command to display all vswif interfacesD. during the upgrade process all vswif interfaces are migrated to vmk interfaces



QUESTION 55What are the three host isolation response options available on a HA cluster?

A. shut down. Restart, power onB. shut down, restart, leave powered onC. shut down, power off, leave powered offD. shut down, power off, leave powered on



QUESTION 56Under which two situations does the dead space reclamation feature VAAI thin provisioning offer the ability to reclaim blocks of a thin provisional LUN on an array?Choose two

A. when a virtual machine is migrated to a different datastoreB. when a guest OS files in a virtual disk are deletedC. when a virtual machine is migrated to a different hostD. when a virtual disk is deleted



QUESTION 57A vNetwork Standard Switch has been configured for IP based load balancing uplinks. A new uplink is added to the switch.

How will the additional uplink be configured by default?

A. the uplink is placed in standby mode until it is added to the active NIC teamB. the uplink is considered active, active but it will not participate in the active NIC team

C. the uplink automatically becomes a part of the IP-based NIC teamD. the uplink is marked as unused until it is added to the active NIC team



QUESTION 58An administrator is attempting to deploy a virtual machine from an existing template, but deploy Virtual Machine from this template menu option is unavailable.

What are the two reasons this issue would occur? Choose two

A. the template has not been stored in the proper formatB. the vsphere client is connected to an ESXi hostC. the template is listed as orphanedD. the administrator is using the vsphere web client



QUESTION 59How has vMotion been improved in vSphere 5?

A. long distance vMotion, allowing for vMotions over a large geographical areaB. Multi platform vMotion, allowing for vMotions between vSphere and hyper-V platformsC. Storage vMotion, allowing for virtual machines storage to be moved between datastoresD. multiple vMotion vmknicks, allowing for more and faster vmotion operations



QUESTION 60What are the two valid default upgrade baselines included with vSphere Update manager?

A. VMFS upgrade to match hostB. VMware tools upgrade to match hostC. VA upgrade to latestD. host upgrade to latest



QUESTION 61An administrator is applying patches to a batch of ESX1 5.x hosts in an under-allocated HA/DRS cluster. An attempt is made to place the host into maintenancemode, but the progress has stalled at 2%. DRS are configured as shown in the exhibit. Of the four choices below, two would effectively resolve this issue.

Which two steps could be taken to correct the problem? Choose two

A. manually migrates any running virtual machines to another hostB. set the cluster to fully automatedC. disable HA monitoring to allow maintenance mode to proceedD. set the cluster migration threshold to aggressive



QUESTION 62Which predefined vCenter service role can perform tasks on ESXi host objects?

A. datastore consumerB. datacenter administratorC. resource pool administratorD. administrator



QUESTION 63An administrator has received calls about a virtual machine experiencing intermittent application issues during the evening. To troubleshoot, the administrator needsto capture the virtual machine in the state it is in during the evening hours for later analysis.

Which two tasks would accomplish this requirement? Choose two

A. Create a scheduled task to clone the virtual machine once per eveningB. create an alarm that is triggered when a loss of VMware tools heartbeat to the virtual machine occurs

C. use esxtop in batch mode and capture metrics during the evening hoursD. create a scheduled task to create a snapshot of the virtual machine once per evening



QUESTION 64An administrator plans to use an upgrade script to upgrade a number of ESXi hosts.

Which two settings are requirements for the kick start file? Choose two

A. keyboard layoutB. root passwordC. install locationD. IP address


Explanation/Reference:Keyboard layout and Network Settings are optional (WW 06.01.2012)

QUESTION 65You're new storage array supports vSphere storage APIs-Storage awareness. You are keen to manage storage placement by using virtual machine profiles. Whichof the following is the correct set of tasks required to enable this?

A. a) Create user-defined storage capabilities b)Associate user-defined storage capabilities with datastores c) Create virtual machine storage profile e) Associate avirtual machi

B. a) Create virtual machine storage profile b) Enable virtual machine storage profiles for a host or cluster c) Create user-defined storage capabilities withdatastores e) Associate a virtual machi

C. a) Enable virtual machine storage profiles for a host or cluster b) Create virtual machine storage profile c) Create user-defined storage capabilities d) Associatea virtual machine storage profile with the virtual machine files or virtual disks



QUESTION 66You have just had a new storage array installed and you are asked by your VMware admin, what is the correct MMP to use? Where would you find out therecommended MPP?

A. VMware HClB. ask the guy installing itC. let cSphere decideD. VMware compatibility matrix



QUESTION 67Which three features are only available when using a vNetwork distributed virtual switch? Choose three


A. NetFlow monitoringB. 802 3ad link aggregationC. network I/O controlD. egress traffic shaping

Correct Answer: ACDSection: (none)Explanation


QUESTION 68The organization you work for is currently running vSphere 4.1 U1. Your team have just created a new Test/ Dev environment based on vSphere 5. The VMmanagement team have asked if you could combine the curret 4.1 U1 environment and 5.0 vCenters with Linked-Mode. What is the correct response to the VMmanagement team?

A. additional licensing is required to use Linked-ModeB. only vCenter administrators can use Linked-ModeC. No problemD. vCenter 4.1 and vCenter cannot be joined with Linked-Mode



QUESTION 69What is the size of a virtual machine .vswp file if defaults are accepted for the virtual machine reservations, limits, and shares?

A. the virtual machine .vswp file is equal to twice the amount of available memory configured for the virtual machine whrn it was createdB. the virtual machine .vswp file is equal to the amount of virtual memory (virtual machine) available memory, plus virtual machine overhead the virtual machine

when it was creastedC. the virtual machine .vswp file is equal to zero length when the virtual is created and expands as necessaryD. the virtual machine .vswp file is equal to the amount of available memory configured for the virtual machine when it was created



QUESTION 70An iSCSI array is being added to a vSphere5 implementation. An administrator wants to verify that all IP storage VMkernel interfaces are configured for jumboframes.

What are two methods to verify the configuration? Choose two

A. run the esxcli network IP interface list commandB. run the esxcfg-vsvif-1commandC. view the VMkernel interface properties in the vSphere clientD. view the network adapter properties in the vSphere client


Explanation/Reference:There is no more an esxcfg-vswif -l command at ESXi 5

QUESTION 71

What are the three default roles provided on an ESXi host?

A. read only, operator access and administratorB. virtual machine user, virtual machine power user and administratorC. network consumer, datastore consumer and resource pool administratorD. no access, read only and administrator



QUESTION 72An administrator finds that vMotion and storage vMotion operations do not succeed on a virtual machine. The virtual machine has been configured with N_Port IDvirtualization. The virtual machine has two data RDMs, one using a RAID 5 LUN on using a RAID0+1 LUN. The mapping file for RAID 5 LUN was created on the

same datastore as the virtual machine, and the mapping file for the RAID0+1LUN was placed in a datastore used for production data virtual disks.

Which two statements are true about this configuration? Choose two

A. vMotion cannot be used unless boot mapping files are placed on the same datastoreB. storage vMotion cannot be used unless both mapping files are placed on the same datastoreC. storage vMotion cannot be used with NPIVD. vMotion cannot be used with NPIV



QUESTION 73Your manager has requested that you look for ways to ensure that your storage is utilized evenly. Which feature of vSphere 5 would help achieve this request?

A. sDRSB. profile driven storageC. VAAID. thin provisioning



QUESTION 74Which of the following formulas defines the amount of virtual machine memory that will always be composed of disk pages?

A. memory limit-(minus) memory reservationB. memory limit-(minus) memory availableC. memory allocated-(minus) memory availableD. memory allocated- (minus) memory limit



QUESTION 75A VMFS3 datastore has just been upgraded to VMFS5.

In what two ways does this affect the partition format? Choose two

A. the partition format is retained, which is the MBR (Master Boot Record) formatB. the partition format is retained, which is the MBR (Master Boot Record) format. To change the GPT (Guide Partition Table) format, the datastore must be re-

formatted.C. The partition format is retained, but will be upgraded to GPT GUID Partition Table) format once the datastore exceeds 2TBD. the partition format is upgraded to the GPT (GUID Partition Table) format



QUESTION 76What the packaging format used by the VMware ESXi Image Builder?

A. .rarB. .zipC. .isoD. VIB



QUESTION 77ESXi 5.0 supports only LAHF and SAHF CPU instructions?

A. TrueB. False



QUESTION 78An administrator is configuring vMotion in their environment. As a part of the implementation, an administrator is examining resource mapping for virtual machines.

What is a likely cause of the error shown in the exhibit?

A. vMotion has been disabled because the production network does not exist on both ESXi host.B. vMotion has not been enabled on the production port groupC. vMotion has not been enabled on a VMkernel port groupD. vMOtion has been disabled because datastored is no presented to both ESXi hosts



QUESTION 79A host failure occurs in vSphere HA cluster, but virtual machines from the failed host are not restarted on the surviving nodes in the cluster.

Which two conditions explain this behavior? Choose two

A. Ha has been configured to use a dedicated failure host, and the failed host is designated failover host.B. An anti-affinity rule configured and restarting the VMs would place them on the same host.C. The virtual machines on the failed host are HA disabled.D. Host Monitoring is disabled.



QUESTION 80Based on the exhibit, what is the reason that none of the paths are marked as preferred?

A. A preferred path has been selected, but the Refresh button must be pressed to reflect the change.B. A preferred path cannot be selected.C. A preferred has not been chosen.D. A preferred path has not been chosen insufficient Active paths exist


Explanation/Reference:There is no preferred path with MRU setting (WW 06.01.2012)

QUESTION 81You boss has asked you deploy 40ESXi hosts as quickly as possible, which is the recommended install method to use in this situation?

A. Scripted InstallationB. Interactive InstallationC. Upgrade via VMware Update ManagerD. VMware Auto Deploy Installation



QUESTION 82Your colleague has accidentally allocated more vRAM than your company are licensed for. What will happen to your virtual machines?

A. all VM's will be powered offB. VMware will be notifiedC. nothing will happenD. new VM's cannot be powered ON



QUESTION 83An administrator is configuring admission control settings for a vSphere HA cluster. The administrator selects the option Allow VMs to be powered ON even they

violate availability constraints.

Which two events occur during an ESXi host failure? Choose two

A. only virtual machines with a high restart priority are restarted on surviving ESXi hostsB. vSphere HA cannot guarantee that all virtual machines from a failed host will be restartedC. vSphere HA restarts virtual machines on surviving ESXi hosts with the most unreserved capacityD. virtual machines can be powered on until the percentage of cluster resources reaches 25 percent



QUESTION 84What is the most appropriate way to test a virtual machine enabled for VMware fault tolerance?

A. cause a failure on the ESXi host running the primary virtual machineB. cause a failure on an application within the primary virtual machineC. disable network connectivity to the primary virtual machineD. cause a failure on the primary virtual machine



QUESTION 85An administrator has recently upgraded their update manager infrastructure to vSphere 5. Several hosts and virtual machines have not been upgraded yet.

Which vSphere object cannot be upgraded by update manager when running against a legacy host?

A. virtual machine hardwareB. ESX hostC. ESX patches

D. VMware tools



QUESTION 86When deploying hosts with VMware auto deploy, which is the recommended method to configure ESXi once it has been installed?

A. manuallyB. powerCLIC. via direct consoleD. host profiles



QUESTION 87An administrator would like to have vCentre take action any time a virtual machine is using over 90% of its available resources for five minutes or longer.

Which three actions can be taken by vCenter server in response to the trigger without running a script? Choose three

A. increase virtual machine memoryB. reboot guest on VMC. send notification trap (SKMP)D. increase virtual machine CPU sharesE. send notification email (SMTP)

Correct Answer: BCESection: (none)Explanation


QUESTION 88Which vSphere feature cannot be used with virtual machines that are enabled for VMware fault tolerance? Choose two

A. EVCB. storage vMotionC. RDMs in virtual compatibility modeD. VMware SMP



QUESTION 89What is the name of the globally unique identifier assigned to each fibre channel port?

A. IP addressB. MAC address (Mac)C. port_IDD. world wide name (WWN)



QUESTION 90The default security policy on a Port Group is:

A. Reject, Reject, RejectB. Accept, Accept, AcceptC. Reject, Reject, Accept

D. Reject, Accept, Accept



QUESTION 91Users are experiencing performance issue when updating their database hosted on a virtual machine. The administrator determines that I/O is high across all HBAson the ESXi host containing the virtual machine.

What actions will most likely correct the issue without significantly impacting other users?

A. manually configure the disk multipathing policies to fix for each datastoreB. migrate the virtual machine to a less used datastore with storage vMotionC. use vMotion to migrate the virtual machine to another ESXi hostD. map additional LUNs to the ESXi host and extend the datastores



QUESTION 92A series of Auto Deploy ESXi hosts which utilize vDS are unable to boot in prior testing. All of the hosts were able to boot successfully.

Which two conditions might cause this issue? Choose two

A. the hosts have experienced a network errorB. the auto deploy server permissions are invalidC. vCenter server is downD. the hosts have experienced a local disk error

Correct Answer: BCSection: (none)

Explanation


QUESTION 93Which two features secure the VMkernel? Choose two

A. Memory HardeningB. binary translationC. kernel module integrityD. service console firewall



QUESTION 94Which new version of VMFS is introduced by vSphere 5?

A. VMFS-2B. VMFS-3C. VMFS-4D. VMFS-5



QUESTION 95VMware solution pools virtual infrastructure resource in a datacenter and delivers them to users as well as a catalog-based service?

A. VMware vCloud Director

B. VMware vCenter ConfigControlC. VMware vCenter OrchestratorD. VMware vSphere 5



QUESTION 96VMFS-5 upgraded from VMFS-3 continues to use the previous file block size which may be larger than the unified 1MB file block size.


A. TrueB. False



QUESTION 97vCenter Server 5 requires a 64 bit DSN?

A. TrueB. False

Correct Answer: A



QUESTION 98An existing vSphere environment will be upgraded to vSphere 5. The current implementation utilizes ESX 4.1 and the new implementations will ESXi 5.x.

In which two ways will the new ESXi 5.x implementation differ from ESX 4.1 implementation? Choose two

A. VMware ESXi 5.x does not provide a host-based firewallB. VMware ESXi 5.x can boot from additional sources, such as a USB driveC. VMware ESXi 5.x does not provide local command-line management capabilitiesD. VMware ESXi 5.x can support virtual machine which larger resource configurations



QUESTION 99Which two conditions must exist on all hosts in the cluster if Enhanced vMotion Compatibility (EVC) is used? Choose two

A. The hosts must all run the same vSphere version.B. The hosts must have the NX/XD feature enabled m BIOS.C. The hosts must all belong to same CPU family.D. The hosts must all be part of the same DRS Group.



QUESTION 100Anvil Incorporated has several departments which each have unique resource requirements in their environments

1. The manufacturing department has three production virtual machines.

2. The manufacturing virtual machines need to have priority access to resources.

3. The development department has no specific resource requirements.

Resource Pools will be used to address three requirements.

When creating the Manufacturing resource pool, which two settings might be configured to meet the started requirements? Choose two

A. Set the shares value to High for memory and CPU on the resource poolB. Set a reservation for memory and CPU on the resource poolC. Set affinity or anti-affinity rules to ensure that the Development VMs do not run the same hosts as Production VMsD. Set a limit for memory and CPU on the resource pool

Correct Answer: ABSection: (none)Explanation


QUESTION 101Which three configuration settings will be migrated when upgrading a host from ESX 4 x Classic to ESXi 5.x? Choose three

A. The NTP configuration in/etc/atp.confB. The syslog configuration in/etc/syslog.confC. The hostname information in/etc/hostsD. The time zone configuration in/etc/local timeE. The name resolution Configruation in /etc/resolv.conf



QUESTION 102Which of the following is not a benefit of VMware Auto Deploy?

A. Decouples the VMware ESXi host from the physical server and eliminates the boot diskB. Eliminates configuration driftC. Simplifies patching and updatingD. Accelerates deployment of virtual machines



QUESTION 103After an upgrade from ESX4.X to ESXi5.0 you notice that your Port Group named "Service Console" is missing. Where has it gone?

A. During the upgrade all Port Groups are moved to Distributed Switches.B. During the upgrade all Port Groups are moved to Standard Switches.C. During the upgrade all Port Groups are removed. The Service Console Port Group will need to be recreated.D. Because ESXi 5.0 has no service Console, upgrading from ESX 4.x to ESXi 5.0 removes the Service Console port group.



QUESTION 104An administrator has deployed a new virtual machine on an ESXi host. Users are complaining of poor performance on the virtual machine performance tool displaythe result shown in the exhibit.

Which two might improve the user experience? Choose two

A. Add a vCPU to the virtual machineB. Remove CPU affinity on the advanced CPU setting of the virtual machineC. Migrate the virtual machine to another ESXi hostD. Remove the limit on the CPU settings of the virtual machine



QUESTION 105Which new feature of vSphere 5 is used to collect host core dumps?

A. vMA 5.0B. ESXi Syslog CollectorC. VMware vDR 2.0D. ESXi Dump Collector



QUESTION 106Which feature of vSphere 5 can be used to increase network throughput to virtual machines?

A. VMDirectpath I/OB. NPIVC. RDMD. SplitRX



QUESTION 107An Administrator has deployed a vSphere 5 implementation. Due to security reasons the system state of a virtual machine must be reverted on a regular basis whatfeature will meet this requirement?

A. Create the virtual machine using independent-Persistent disksB. Create a Scheduled Task using the Delete All Snapshots option according to security requirements

C. Create the virtual machine using independent-Nonpersistent disksD. Create a Scheduled Task using the Delete Snapshot option to delete the most recent snapshot according to security requirements.



QUESTION 108What are the two iSCSI discovery methods that are supported by an ESXi host?

A. Dynamic Discovery, FindtargetsB. Static Discovery, FindtargetsC. Static Targets, Dynamic TargetsD. Static Discovery, Send Targets



QUESTION 109Distributed Power Management (DPM) requires which technology to be available on the NIC?

A. DNSB. BMCC. NetBIOSD. Wake On LAN (WOL)



QUESTION 110You have just had a new storage array installed and you are looking for a quick way to move your virtual machines to LUN's presented by your new storage. What isthe best way to do this?

A. Use Storage vMotion to migrate the virtual machine storage to the new datastoresB. Create a datastore cluster from the existing datastores and the new datastores and let sDRS move the virtual machine storage to the new datastores.C. Enable VAAI and the migration from the old storage to the new will happen automatically as VAAI will always use the newest storage LUN'sD. Use the Rebalance function to move migrate the virtual machine storage to the new datastores automatically



QUESTION 111Which of the following actions would be LEAST likely to reduce resource contention?

A. Powering off a VMB. Enabling Swap-To-CacheC. Enabling vNUMAD. Disable transparent memory page sharing.



QUESTION 112An administrator wants to determine the current network adapter configuration for an uplink on an ESXi host.

Which three items can be viewed from the Network Adapter section Configuration tab, using the vSphere client? (Choose three)

A. Observed IP rangesB. TCP segmentation offloads (TSO) support

C. Adapter speedD. Jumbo frames supportE. Wake on LAN support



QUESTION 113what are the two ways to enable remote tech support mode (SSH) on an ESXi 5 .x host? (Choose two)

A. Through the Security Profile pane of the Configuration tab m the vSphere ClientB. Through the Direct Console User interface (DCUI)C. Through the Advanced Settings pane of the Configuration tab in the vSphere ClientD. Through the Networking pane of the Configuration tab in the vSphere Client

Correct Answer: ABSection: (none)Explanation


QUESTION 114To improve security which new feature has been added to ESXi?

A. Local ModeB. Anti-VirusC. vShieldD. Firewall



QUESTION 115A virtual machine, VM21 ,will be migrated between two ESXi 5.x hosts, labeled ESXi01 and ESXi02.Each host has two vSphere Standard Switches(vSS),configured as follows:

1. vSwitch0 has a port group labeled management and a port group labeled vMotion.

2. The management port group contains a vmkernel port tagged for management traffic.

3. The vMotion port group contains a vmkernel port tagged for vMotion traffic.

4. vSwitch0 on ESX01 has an uplink attached to the 10.1.30.0/24 network.

5. vSwitch0 on ESX02 has an uplink attached to the 10.1.30.0/24 network.

6. Each host has a vSwitch 1 with a production port group used by virtual machine traffic.7. Each vSwitch 1 has an uplink attached to the 10.1.40.0/24

What is true about migrating VH21 to the new host?

A. vMotion would be supported in this configurationB. Storage vMotion would not be supported in this configurationC. vMotion would not be supported in this configurationD. Storage vMotion would be supported in the storage device supports



QUESTION 116Which two conditions will prevent a virtual machine from being successfully migrated using Storage vMotion? (Choose two)

A. The virtual machine has active snapshots.B. The virtual machine has an in progress installation of VMware Tools.C. The virtual machine has a disk that is configured as independent non-persistent.D. The virtual machine has a disk that is configured as persistent.



QUESTION 117An administrator is using Update Manager 5.0 to update virtual appliances in a vSphere environment. The environment is using the vCenter Server appliance. Theadministrator is unable to remediate the vCenter server appliance.

What would cause the remediation to fail?

A. Updating of the appliance can only be done if the vCenter Server Appliance has beenB. Remediation must be configured on the Appliance Administration page before useC. Remediation of the vCenter Server Appliance with Update Manager is not supportedD. Remediation of the vCenter Server Appliance must be done from the Power CLL



QUESTION 118Your boss has asked you to setup 4 ESXi host to evaluate the new vSphere 5 release, which is the recommended install method to use in this situation?

A. vSphere Auto Deploy installationB. Scripted installationC. Upgrade via VMware Update ManagerD. Interactive installation



QUESTION 119An administrator is creating a virtual machine that will be running "Windows 2008 Enterprise (64- bit). The application to installed in the virtual machine requireseight vCPUs to run effectively. During installation, the only available options are one, two, three, or four vCPUs.

What condition explains the available vCPU selections?

A. The virtual machine hardware version is 8.B. The guest operating system for the virtual machine is 64-bit.C. The ESXi host has two AMD dual-core CPUs.D. The ESXi host has two Intel dual-core CPUs.



QUESTION 120An administrator is using VSphere auto deploy to Deploy 25 ESXi hosts. The information used for deployment will be stored using an answer file.

What are three ways that auto deploy can access the answer file? Choose three

A. ISOB. CIFSC. SFTPD. HTTP


Explanation/Reference:Missing option E which I believe may of been NFS... Unsure.. will compare

OLD DUMP was C-D-E - E=NFSExplanation: (REVIEWED)Prior it was 3 choices - then one - then none because of the following answers.. I think this question is incomplete and personally think it was talking about answer

files alone. Just note all the autodeploy doc's dont say. The only protocol they mention is HTTP.

Also, since the AD server is Linux based that would only mean SFTP and NFS would work or could work if it is 3 options. HTTP would be correct if it was oneanswer..

Corrrect answer should be none... I don't think this is correct because of the following excerpt:The answer file is not stored in a location or format that administrators can access. Use the Host Profiles UI in the vSphere Client to manageanswer files.

The correct answer is D. HTTP. See the VMware AutoDeploy Administrator's guide, page 9 http://labs.vmware.com/wp-content/uploads/2010/08/autodeploy_fling.pdfThe administrator does not need to access the files, the question is about auto deploy process downloading the configuration file. The document doesn't mention

other ways but HTTP. The question might be wrong on VCP test, this way nobody could score 500 But if I have to choose 3 answers, I would go with C. SFTP,D. HTTP and E. NFS.Vsphereking, thank you very much for the hard work, I'm taking VCP test next week.

THIS ONE is kind of interesting... from what I have been reading... Answer files are stored differently when using Auto Deploy... From what I gather below and fromthe admin guide itself AutoDeploy Completely stores and gives management of the answer files to vCenter. It is not accessible to admins.....

Pay close attention as well.. Previously Kickstart installs and upgrade/Install scripts could be stored on these types of storage-access protocols but Auto Deploy isCompletely Different! All these answers to this question are wrong IMO as the correct answer should be a new one -

vsphere-esxi-vcenter-server-50-auto-deploy-guide

The installation or upgrade script can reside in one of the following locations (normal upgrade):o FTPo HTTP/HTTPSo NFSo USB flash driveo CDROM

When you install ESXi using the ks.cfg script, the default root password is mypassword.o The following locations are supported for the installation or upgrade script:o CD/DVD.o USB Flash driveo A location accessible with the following protocols: NFS, HTTP, HTTPS, FTP

When using AutoDeploy:The answer file is not stored in a location or format that administrators can access. Use the Host Profiles UI in the vSphere Client to manage answer files.

QUESTION 121Which of the following actions is not available via the Direct Console?

A. Shutdown hostB. View host logsC. Configure host DNSD. Enter host into Maintenance Mode



QUESTION 122What are the Automation Levels on a DRS Cluster?

A. Manual, Partially Automatic, Fully AutomaticB. Manual, Semi Automated, Fully AutomaticC. Manual, Semi Automatic, AutomaticD. Manual, Partially Automated, Fully Automated



QUESTION 123Which of the following is not a new feature made available with vSphere 5?

A. sDRSB. VSAC. vSphere Web ClientD. vDR



QUESTION 124What are two benefits of virtual compatibility mode for RDMs, as compared to physical compatibility mode? Choose two


A. Allows the use of SAN-aware applicationsB. Allows for cloningC. Allows for the use of array-based snapshotsD. Allows for template creation of the related virtual machine



QUESTION 125An Ex-employee had named all of the virtual machines using the wrong naming conventions. After renaming the virtual machines what is the next step to ensuringthat all virtual machine files are named the same?

A. Storage vMotionB. Remove from Inventory and then Add to InventoryC. Rename the virtual machine files manuallyD. Nothing, renaming the virtual machine will rename all of the virtual machine files



QUESTION 126An administrator is troubleshooting an ESXi 5.x host and needs to export diagnostic information. The host is currently managed by a vCenter server instance.

Which two ways can the information be gathered using the vSphere Client? Choose two

A. In the vSphere Client, select the affected ESXi host. Right-click the host and select export Diagnostic data.Select a location the location and click OK.

B. Select Home, Under Administration, click System Logs and click the export system Logs button. Select the effected ESXI host. Select "Select All". Select alocation and click finish

C. Select Home, Under Administration, click System Logs and select the affected ESXI host. Right-click the host and select Export Diagnostic Data. Select alocation and click OK.

D. In the vSphere Client, select the affected ESXi host, Select File, Export and Export System Logs. Select a location and click finish



QUESTION 127To uplink a Hardware FCoE Adapter, what, configuration step must be performed?

A. Create a vSphere Distributed Switch and add the FCoE Adapter as an uplink.B. Enable the FCoE service and select the newly installed adapter.C. Create a vSphere Standard Switch and the FCoE Adapter as an uplink.D. No configuration is required. The adapter will appear to the host as a Fibre Channel Adapter.



QUESTION 128Which three storages I/O control conditions might trigger the Non-VI workload detected on the datastore alarm? Choose three

A. The datastore is connected to an ESX/ESXi 4.0 host that does not support Storage I/O Control.B. The datastore is on an array that is performing system tasks such as replication.C. The datastore is utilizing active/passive multipathing or NMP (Native Multi-Pathing)D. The datastore is storing virtual machines with one or more snapshots.E. The datastore is connected to an ESX/ESXi 4.0 host that is not managed by vCenter.

Correct Answer: ABESection: (none)Explanation


QUESTION 129Which two settings are required by the deployments wizard when the VMware vCenter Server Appliance? Choose two

A. Disk formatB. Amount of RAMC. Cluster and/or HostD. Size of me JVM Heap



QUESTION 130Which two iSCSI adapter require one or more VMkernel ports? Choose two

A. Independent Hardware iSCSI Adapter

B. Software iSCSI AdapterC. Adaptive Software iSCSI AdapterD. Dependent Hardware iSCSI Adapter



QUESTION 131Which two settings determine the amount of memory overhead required by a virtual machine? Choose two

A. Reserved memoryB. Configured memoryC. guest operating system (32- or 64-bit)D. Number of vCPUs



QUESTION 132A company runs several instances of multi-threaded application that requires virtual machine to be configured with multiple vCPUs.

Which metric is checked to determine if CPU contention exists on an ESXi 5.x host?

A. %RUNB. %WAITC. %USEDD. %RDY



QUESTION 133ESX5 introduces Virtual Hardware Version?

A. Hardware v4B. Hardware v5C. Hardware v7D. Hardware v8



QUESTION 134You have been asked to provide high availability for your vCenter server. Which product would you use to help achieve this?

A. Fault-ToleranceB. vCenter Linked-ModeC. Microsoft Clustering ServicesD. vCenter Heartbeat



QUESTION 135what are three true statements about quiescing virtual machine snapshots?(Choose three)

A. VMware Tools is not required for quiescing to be successful.B. The operation ensures that the snapshot includes a power state.

C. The operation may alter the behaviour of applications within the virtual machine.D. The operation ensures all pending disk I/O operations are written to disk.


Explanation/Reference:Only 4 Old dump had 5: Answers prior was C,D,and E (valid by test takers)

E:VMware Tools is required for quiescing to be successful.

See:http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1015180Quiescing doesn't allow you to capture a powerstate - the snapshot does that... Quiescing only affect applications in I/O within the VM.This is why if you snapshot a VM that is running without VMware tools it will snapshot but can also break the VM. For example try snapshotting active directory VMwithout VMware tools. Eventually it will break it if won't the first time.

Page 212 from vsphere-esxi-vcenter-server-50-virtual-machine-admin-guide.pdf

QUESTION 136

Which two statements are about Unplanned Device Loss in a vSphere 5 environment?(Choose two)

A. It is condition where an ESXi host determine a device loss has occurred that was not planned.B. Performing a storage rescan restores access to determine why device loss occurred.C. It is a condition where an ESXi host is unable to determine why device loss occurred.D. Performing a storage rescan removes the persistent information related the device.



QUESTION 137An administrator has purchased a new 10GB Converged Network Adapter(CAN) for installation in the system that is running ESXi 5.x the administrator hasdownloaded the latest driver from the hardware vendor and wants to include the driver in an image. The image profile acceptance level is set to VMware Supported.

Which acceptance level could the driver have and still be include in the image?(Choose two)

A. PartnerSupportedB. VMwareAcceptedC. CommunitySupportedD. VMwareCertified



QUESTION 138When is vNUMA enable by default on a virtual machines?

A. When the guestOS is configured using an SMP HALB. All the timeC. vNUMA is never enabled by defaultD. When a virtual machine has more than 8 vCPU's


Explanation/Reference:http://www.vmware.com/pdf/Perf_Best_Practices_vSphere5.0.pdf

Page 40: “By default, vNUMA is enabled only for virtual machines with more than eight vCPUs”

QUESTION 139A datastore administrator has requested that a virtual disk attached to a virtual machine running an I/O intensive database application be fully provisioned. Thevirtual disk was initially thin provisioned. Which two methods would accomplish this task?(Choose two)

A. Use Storage vMotion and change the disk type to Flat.B. Use the inflate option in the Datastore Browser.C. Use the inflate option in the Datastore Properties.D. Use Storage vMotion and change the disk type to Thick.



QUESTION 140Additional licensing is required once the number of cores per CPU reaches which of the following?

A. 16 or more coresB. 12 or more coresC. 8 or more coresD. 6 or more cores



QUESTION 141Before you upgrade an ESXi host what should you do?

A. update the ESXi restore CD with the current ESXi imageB. save the current ESXi image to another ESXi serverC. copy the embedded ESXi image to a USB flash driveD. save the ESXi configuration using vicf g-cfgbackp s from the Vcli



QUESTION 142ESX Service Console patches should be applied (Choose Two)?

A. in accordance with VMware Security AdvisoriesB. when notified on the VMware Security BlogC. when advised by VMware authorized technical support personnelD. in accordance with VMware and RedHat Security Advisories



QUESTION 143You've been asked to make sure that you guarantees a certain level of capacity, performance, availability, redundancy fo your virtual machines storage. Whatfeature of vSphere 5 would you use to ensure you can meet that request?

A. Capacity PlannerB. Profile-Driven StorageC. sDRS/vMotion

D. VAAI



QUESTION 144You manager has requested that you look for ways to ensure that your storage is utilized evenly. Which feature of vSphere 5 would help achieve this request?

A. Profile Driven StorageB. sDRSC. Thin ProvisioningD. VAAI



QUESTION 145An Ex-employee had named all of the virtual machines using the wrong naming conventions. After renaming the virtual machines what is the next step to ensuringthat all virtual machine files are named the same?

A. Nothing, renaming the virtual machine will rename all of the virtual machine files.B. Remove from Inventory and then Add to InventoryC. Rename the virtual machine files manuallyD. Storage vMotion



QUESTION 146What are the block size options for a new created VMFS-5 VMDK?

A. 1MBB. 1MB, 2MB, 4MB, 8MBC. 4MBD. 8MB



QUESTION 147ESX5 introduces Virtual Hardware version?

A. Hardware v4B. Hardware v5C. Hardware v7D. Hardware v8



QUESTION 148A Virtual machines appear in the vSphere Client inventory list with (orphaned) appended to their name. What is the quickest solutions to correct this?

A. Reboot the Host that VM is hosted onB. Reboot the VMC. Remove the VM from Inventory, Browse to the VM .vmx file on the Datastore and add the VM to InventoryD. Right click the VM, select Relocate and select a different host with the cluster



QUESTION 149You have just had a new storage array installed and you are looking for a quick way to move your virtual machines to LUN's presented by your new storage. Whatsis the best way to do this?

A. Create a datastore cluster from the existing datastores and the new datastores and let sDRS move the virtual machine storage to the new datastoresB. Enable VAAI and the migration from the old storage to the new will happen automatically as VAAI will always use the newest storage LUN'sC. Use Storage vMotion to migrate the virtual machine storage to the new datastoresD. Use the Rebalance function to move migrate the virtual machine storage to the new datastores automatically



QUESTION 150A virtual machine using Hardware Version 3 is supported with vSphere 5?

A. FalseB. True



QUESTION 151You're new storage array supports vSphere Storage APIs - Storage Awareness. You are keen to manage storage placement by using virtual machine profiles.Which of the following is the correct set of tasks required to enable this?

A. A) Create user-defined storage capabilities B) Associate user-defined storage capabilities with datastores C) Enable virtual machine storage profiles for a hostor cluster D) Create virtual machine storage profile E) Associate a virtual machi

B. A) Create virtual machine storage profile B) Enable virtual machine storage profiles for a host or cluster C) Create user-defined storage capabilities D) Associateuser-defined storage capabilities with datastores E) Associate a virtual machi

C. A) Enable virtual machine storage profiles for a host or cluster B) Create virtual machine storage profile C) Create user-defined storage capabilities D) Associatea virtual machine storage profile with the virtual machine files or virtual disks



QUESTION 152vCenter Server 5 requires a 64 Bit DSN?

A. FalseB. True




QUESTION 153SSH operates on which Port?

A. 21

B. 22C. 23D. 25



QUESTION 154You have just had a new storage array installed and you are asked by your VMware admin, whats is the correct MMP to use? Where would you find out therecommended MPP?

A. VMware Compatibility MatrixB. Ask the guy installing itC. Let vSphere decideD. VMware HCL



QUESTION 155What is the name of the globally unique identifier assigned to each Fibre Channel Port?

A. IP AddressB. MAC AddressC. World Wide NameD. Port_ID



QUESTION 156What are the Automation Levels on a DRS Cluster?

A. Manual, Partially Automatic, Fully AutomaticB. Manual, Partially Automated, Fully AutomatedC. Manual, Semi Automated, Fully AutomaticD. Manual, Semi Automatic, Automatic



QUESTION 157Which ports need to be available on vCenter system?

A. 80, 389, 443, 636B. 904, 905, 443, 80C. 80, 366, 443, 902D. 983, 443, 80, 366



QUESTION 158What is the recommended size for the /var/log partition?

A. 3072MBB. 1024MBC. 512MB

D. 2000MB



QUESTION 159What is an HA Slot?

A. A slot has nothing to do with HA, it's how DRS calculates which Virtual Machine should be placed where.B. A slot is given to each Virtual Machine, this determines the restart priority.C. A slot is a logical representation of the memory and CPU resources that satisfy the requirements for any powered-on virtual machine in the cluster.D. A slot is a given to each Host in an HA Cluster, there is a maximum of 32 in an HA Cluster



QUESTION 160An administrator is installing a vCenter server instance to manage 10 ESXi hosts and 100 machines. Approximately how much additional datastore capacity isrequired to increase the statistics collection level to maximum for all collection periods, compared to a standard installation?

A. 6GBB. 9GBC. 3GBD. 1GB



QUESTION 161Assuming that this is the only virtual machine and the only resource pool, what is the maximum amount of memory that can be configured for use by the virtualmachine that is part of the finance resource pool?


A. 16,384 MB, less virtual machine overheadB. 57 MB less virtual machine overheadC. 3,009 MB, less virtual machine overheadD. 13, 375 MB, less virtual machine overhead

Correct Answer: CSection: (none)

Explanation

Explanation/Reference:Answer should be c IMO - cannot allocate 16GB as 4GB appears to be max > details from OLD dump.

Prior: AAfter: C (This is because of another 410 Dump has the same questions and Worst Case shows 4GB - this could be the only answer IMO)

QUESTION 162To get the maximum performance benefits of vNUMA it is recommended to:

A. Only use single vCPU virtual machinesB. Enable EVC on your clustersC. Disable Hyper-ThreadingD. Make sure your clusters are composed entirely of hosts with matching NUMA architecture



Exam B

QUESTION 1What is the maximum concurrent vMotion operations per host(1Gb/s network)?

A. 1B. 2C. 4D. 8



QUESTION 2What is the Maximum concurrent vMotion operations per host (10Gb/s network)?

A. 1B. 2C. 4D. 8



QUESTION 3What is the Maximum hosts connect to vCenter Orchestrator?

A. 10B. 100C. 1000

D. 512



QUESTION 4What is the Maximum VMware Tools upgrades per ESXi host?

A. 100B. 70C. 90D. 24



QUESTION 5What is the Maximum Fault Tolerance protected virtual machines per ESXi host?


A. 4B. 512C. 256D. 32



QUESTION 6What is the Maximum ephemeral port groups per vCenter?

A. 256B. 5000C. 30000D. 4088



QUESTION 7What is the Maximum Virtual CPUs per virtual machine (Virtual SMP) ?

A. 8B. 4C. 16D. 32



QUESTION 8

What is the Maximum VMware Tools scans per VUM server?

A. 75B. 70C. 90D. 24



QUESTION 9What is the maximum software iSCSI targets?

A. 128B. 265C. 64D. 62



QUESTION 10What is the maximum number of total FC paths on a server?

A. 512B. 1024C. 128D. 255

Correct Answer: B



QUESTION 11What is the Maximum NICs that can be associated or port bound with the software iSCSI stack per server?

A. 1B. 2C. 4D. 8



QUESTION 12What is the Maximum be2net 10Gb Ethernet ports (Emulex) per host?

A. 8B. 2C. 10D. 12



QUESTION 13What is the Maximum ESXi host scans per VUM server?

A. 75B. 71C. 24D. 90



QUESTION 14What is the Maximum VMDirectPath PCI/PCIe decices per virtual machine?

A. 2B. 4C. 8D. 10



QUESTION 15What is the Maximum VMFS-3 RDM size?

A. 2TB minus 512 bytesB. 64TBC. 2TBD. 1TB



QUESTION 16What is the Maximun ESXi host remediations per VUM server?

A. 71B. 75C. 90D. 24



QUESTION 17What is the Maximum VMFS-5 block size (non upgraded VMFS-3 volume) ?

A. 1MBB. 2MBC. 4MBD. 8MB



QUESTION 18What is the maximum FC LUNs per host?

A. 128B. 256

C. 512D. 1024



QUESTION 19What is the Maximum USB 3.0 devices per virtual machine?

A. 1B. 3C. 20D. 10



QUESTION 20What is the maximum VMDirectPath PCI/PCIe devices per host ?

A. 2B. 4C. 8D. 10



QUESTION 21What is the Maximum Virtual SCSI targets per virtual SCSI adapter?

A. 15B. 4C. 60D. 14



QUESTION 22What is the Maximum children resource pool?

A. 1600B. 1024C. 512D. 1000



QUESTION 23What is the Maximum USB controllers per virtual machine?

A. 1B. 2C. 3D. 4



QUESTION 24What is the Maximum Virtual machine swap file size?

A. 255GBB. 256GBC. 1TBD. 2TB



QUESTION 25What is the Maximum Broadcom 1 Gb iSCSI HBA initiator ports per server?

A. 1B. 2C. 3D. 4



QUESTION 26What is the Maximum distributed virtual network switch ports per vCenter?

A. 30000B. 4096C. 4088D. 5000



QUESTION 27What is the Maximum virtual network switch creation ports per standard switch (VSS) ?

A. 4088B. 4096C. 1016D. 30000



QUESTION 28What is the Maximum concurrent Storage vMotion operations per host?

A. 2B. 8C. 128D. 32

Correct Answer: ASection: (none)

Explanation


QUESTION 29What is the Maximum host per VMFS volume?

A. 256B. 64C. 10D. 32



QUESTION 30What is the Maximum datastores per datastore cluster?

A. 32B. 300C. 10D. 26



QUESTION 31What is the Maximum virtual machines hardware upgrades per VUM server?

A. 75

B. 90C. 24D. 70



QUESTION 32What is the Maximum ESXi host upgrades per cluster?

A. 1B. 71C. 10D. 32



QUESTION 33What is the Maximum virtual disks per datastore cluster?

A. 1000B. 9000C. 5000D. 256



QUESTION 34What is the Maximum tg3 1Gb Ethernet ports (Broadcom) per host?

A. 32B. 16C. 24D. 8



QUESTION 35What is the Maximum VUM Cisco VDS update and deployment?

A. 70B. 10C. 40D. 100



QUESTION 36What is the Maximum ESXi host upgrades per VUM server?

A. 71B. 75C. 90D. 24



QUESTION 37What is the Maximum Host per VDS?

A. 350B. 256C. 32D. 100



QUESTION 38What is the maximum file size (1MB VMFS-3 block size)?

A. 128GBB. 256GBC. 512GBD. 1TB



QUESTION 39

What is the maximum number of swap files?

A. 1 per virtual machineB. 2 per virtual machineC. 3 per virtual machineD. 4 per virtual machine



QUESTION 40What is the maximum virtual disks per host?

A. 128B. 1024C. 2048D. 512



QUESTION 41What is the maximum distributed switches (VDS) per vCenter?

A. 32B. 24C. 256D. 8

Correct Answer: A



QUESTION 42What is the maximum FC LUN IDs?

A. 128B. 256C. 255D. 512



QUESTION 43What is the maximum vCenter servers systems connect to vCenter Orchestrator?

A. 10B. 100C. 8D. 12



QUESTION 44What is the maximum no-Motion provisioning operations per host?

A. 2B. 4C. 8D. 10



QUESTION 45What is the maximum amount of virtual CPU's per Fault Tolerance protected virtual machine?

A. 1B. 4C. 8D. 32



QUESTION 46What is the maximum Floppy controllers per virtual machine?

A. 1B. 2C. 4D. 3


Explanation


QUESTION 47What is the maximum virtual machines per cluster?

A. 1000B. 512C. 3000D. 1024



QUESTION 48What is the maximum FC LUNs size?

A. 1TBB. 2TBC. 2TB minus 512kD. 64TB



QUESTION 49What is the maximum Floppy devices per virtual machine?

A. 1

B. 2C. 3D. 4



QUESTION 50What is the maximum total virtual network switch ports per host (VSS and VDS ports)?

A. 4088B. 4096C. 1016D. 5000



QUESTION 51What is the maximum virtual machines hardware scans per host?

A. 70B. 24C. 40D. 90



QUESTION 52what is the maximum active ports per host(VSS and VDS ports)?

A. 4096B. 1016C. 4088D. 5000



QUESTION 53What is the maximum VMFS volumes per host?

A. 128B. 256C. 512D. 64



QUESTION 54What is the maximum e1000e 1Gb Ethernet ports (Intel PCI-e) per host?

A. 24B. 32C. 16D. 8



QUESTION 55What is the maximum VMFS-5 RDM size (physical compatibility)?




QUESTION 56A memory reservation defines:

A. the amount of virtual machine memory that can be paged to the VMkernel swapfielB. the maximum amount of physical memory that will be used by a VMC. the amount of host memory reservedfor the VMkernelD. the amount of physical memory that is guaranteed to the VM



QUESTION 57

What is the maximum file size (4MB VMFS-3 block size)?

A. 256GBB. 512GBC. 1TBD. 2TB minus 512 bytes



QUESTION 58What is the maximum Broadcom 10Gb iSCSI: dynamic targets per adapter port?

A. 62B. 32C. 64D. 128



QUESTION 59What is the maximum number of paths to FC LUN?


A. 10B. 64C. 32D. 62



QUESTION 60What is the maximum failover as percentage of cluster?

A. 100%B. 50%C. 64%D. 80%



QUESTION 61What is the maximum virtual machines per host?

A. 265B. 512C. 128D. 1024


Explanation


QUESTION 62What is the maximum virtual machines connect to vCenter orchestrator?

A. 10000B. 15000C. 30000D. 20000



QUESTION 63What is the maximum ixgbe 10Gb Ethernet ports(Intel) per host?

A. 8B. 2C. 4D. 32



QUESTION 64What is the maximum Broadcom 10Gb iSCSI HBA initiator ports per server?

A. 1

B. 2C. 3D. 4



QUESTION 65What is the maximum e1000 1GB Ethernet ports (Intel PCI-x) per host?

A. 32B. 24C. 16D. 8



QUESTION 66What is the maximum virtual machine disk size?

A. 2TB minus 512BB. 256GBC. 1TBD. 2TB



QUESTION 67VMware vSphere can be evaluated prior to purchase. What is the maximum number of days the evaluation can be used before a license must be purchased?

A. 30 daysB. 90 daysC. 120 daysD. 60 days



QUESTION 68What is the maximum nx_nic 10GB Ethernet ports (NetXen) per host?

A. 2B. 8C. 24D. 32



QUESTION 69What is the maximum file size (8MB VMFS-3 block size) ?

A. 256 GBB. 2TBC. 1TBD. 2TB minus 512 bytes



QUESTION 70What is the maximum VUM host scans in a single vCenter server?

A. 1000B. 512C. 256D. 128



QUESTION 71What is the maximum VMFS-3 block size?

A. 1MBB. 2MBC. 4MBD. 8MB



QUESTION 72

What is the maximum storage providers?

A. 10B. 8C. 100D. 16



QUESTION 73What is the maximum files per VMFS-5 volume?

A. 10,512B. 30,720C. 130,690D. 120,000



QUESTION 74What is the maximum concurrent vMotion operations per datastore?

A. 128B. 8C. 64D. 32

Correct Answer: A



QUESTION 75What is the maximum VMFS-5 volume size?




QUESTION 76What is the maximum RAM per virtual machine?

A. 255GBB. 256GBC. 1TBD. 2TB



QUESTION 77What is the maximum parallel ports per virtual machine?

A. 1B. 2C. 3D. 6



QUESTION 78What is the maximum virtual machines per host?

A. 128B. 1000C. 512D. 256



QUESTION 79What is the maximum Qlogic 1GB iSCSI HBA initiator ports per server?

A. 1B. 2C. 3D. 4



QUESTION 80What is the maximum swap file size?

A. 1GBB. 1TBC. 256GBD. 255GB



QUESTION 81What is the maximum amount of RAM per fault tolerance protected virtual machine?

A. 1TBB. 255GBC. 256GBD. 64GB



QUESTION 82What is the maximum virtual SCSI adapters per virtual machine?

A. 1B. 2

C. 3D. 4



QUESTION 83What is the maximum software FCoE adapters?

A. 2B. 4C. 8D. 16



QUESTION 84What is the maximum number of paths to a LUN (software iSCSI and hardware iSCSI) ?

A. 1B. 10C. 4D. 8



QUESTION 85What is the maximum bnx2x 10Gb Ethernet ports (Broadcom) per host?

A. 2B. 8C. 4D. 10



QUESTION 86What is the maximum virtual machines hardware upgrades per host?

A. 100B. 70C. 24D. 90



QUESTION 87What is the maximum VMDirectPath PCI/PCIe devices per virtual machine?

A. 2B. 6, if 2 of them are Teradici devicesC. 3D. 8



QUESTION 88What is the maximum NFS mounts per host?

A. 10B. 128C. 256D. 1024



QUESTION 89What is the maximum RAM per host?

A. 1TBB. 2TBC. 64TBD. 512GB



QUESTION 90What is the maximum Broadcom 10Gb iSCSI targets per adapter port?

A. 64B. 62C. 32D. 128



QUESTION 91What is the maximum IDE devices per virtual machine?

A. 1B. 4C. 128D. 16



QUESTION 92What is the maximum bnx2 1Gb Ethernet ports (Broadcom) per host?

A. 16B. 8C. 32D. 24


Explanation


QUESTION 93What is the maximum VMFS-5 RDM size (virtual compatibility) ?

A. 2TB minus 512 bytesB. 64TBC. 1TBD. 256GB



QUESTION 94What is the Maximum number of FC HBA's of any type?

A. 2B. 4C. 8D. 10



QUESTION 95What the Maximum USB devices connected to a virtual machine?

A. 1

B. 6C. 10D. 20



QUESTION 96What is the Maximum Serial port virtual machine?

A. 1B. 4C. 10D. 3



QUESTION 97What is the Maximum Video memory per virtual machine?

A. 128MBB. 265MBC. 64MBD. 1GB



QUESTION 98What is the maximum Qlogic iSCSI: static targets per adapter port?

A. 8B. 32C. 64D. 62



QUESTION 99What is the Maximum file size (2MB VMFS-3 block size)?

A. 256GBB. 512GBC. 1TBD. 2TB minus 512 bytes



QUESTION 100What is the Maximum Virtual Disks per virtual machine (PVSCSI)?

A. 60B. 10C. 4D. 1



QUESTION 101What is the Maximum iSCSI LUNs per server?

A. 128B. 256C. 512D. 1024



QUESTION 102What is the Maximum Powered-on virtual machines per VMFS volume?

A. 1000B. 10000C. 1024D. 2048



QUESTION 103

What is the Maximum concurrent host HA failover?

A. 32B. 16C. 8D. 10



QUESTION 104What is Maximum resource pool per cluster?

A. 3000B. 1600C. 512D. 1088



QUESTION 105What is the Maximum combination of 10Gb and 1Gb Ethernet ports per hosts?

A. Two 10Gb and Six 1Gb portsB. Four 10Gb and Four 1Gb portsC. Six 10Gb and Four 1Gb portsD. Four 10Gb and Six 1Gb ports

Correct Answer: C



QUESTION 106What is the Maximum concurrent Storage vMotion operations per datastore?

A. 8B. 128C. 32D. 16



QUESTION 107What is the Maximum VUM virtual machines scans in a single vCenter server?

A. 10000B. 3000C. 1000D. 30000



QUESTION 108What is the Maximum FC HBA ports?

A. 2B. 8C. 16D. 32



QUESTION 109What is the Maximum VMFS-3 volume size?

A. 2TB minus 512 bytesB. 64TBC. 2TBD. 32 TB



QUESTION 110What is the maximum Qlogic iSCSI: dynamic targets per adapter port?

A. 8B. 32C. 64D. 62



QUESTION 111what is the Maximum files per VMFS-3 volume?

A. 10,000B. 30,720C. 130,690D. 128,000



QUESTION 112What is the Maximum number of total iSCSI paths on a server?

A. 128B. 512C. 1024D. 2048



QUESTION 113What is the Maximum targets per FC HBA?

A. 2B. 128

C. 64D. 256



QUESTION 114What is the Maximum virtual CPU's per host?

A. 512B. 1024C. 2048D. 256



QUESTION 115What is the Maximum concurrent running workflows?

A. 100B. 10C. 150D. 1000



QUESTION 116What is the Maximum amount of virtual disks per Fault Tolerance protected virtual machine?

A. 2B. 10C. 16D. 60



QUESTION 117What is the Maximum Virtual NICs per virtual machine?

A. 2B. 4C. 8D. 10



QUESTION 118What is the Maximum resource pool tree depth?

A. 2B. 10C. 4D. 8



QUESTION 119What is the Maximum igb 1Gb ports (Intel) per host?

A. 16B. 32C. 24D. 8



QUESTION 120What is the Maximum logical CPU's per host?

A. 160B. 8C. 32D. 64



QUESTION 121What is the Maximum Virtual SCSI targets per virtual machine?

A. 60B. 15C. 4D. 65



QUESTION 122What is the Maximum hosts per cluster?

A. 8B. 32C. 16D. 20



QUESTION 123What is The Maximum Concurrent remote console connections to a virtual machine?

A. UnlimitedB. 40C. 10D. 8


Explanation


QUESTION 124What is the Maximum VMware Tools scans per ESXi host?

A. 100B. 24C. 90D. 70



QUESTION 125What is the Maximum virtual CPU's per core?

A. 8B. 10C. 25D. 32



QUESTION 126What is the Maximum resource pool per host?

A. 1600

B. 3000C. 1024D. 512



QUESTION 127What is the Maximum VMware Tools upgrades per VUM server?

A. 75B. 70C. 90D. 24



QUESTION 128What is the Maximum datastores per vCenter?

A. 256B. 300C. 600D. 512



QUESTION 129What is the Maximum virtual machines hardware scans per VUM server?

A. 75B. 70C. 90D. 24



QUESTION 130What is the Maximum forcedeth 1Gb Ethernet ports (NVIDIA) per host?

A. 2B. 8C. 24D. 32



QUESTION 131What is the maximum IDE controllers per virtual machine?

A. 1B. 2C. 3D. 4



QUESTION 132What is the maximum xHCI USB controllers per virtual machine?

A. 1B. 3C. 10D. 20



QUESTION 133What is the maximum Raw Device Mapping (RDM) Size Supported on VMware vSphere 4.1 Host?

A. 512GBB. 2TBC. 1TBD. 2TB Minus 512B



QUESTION 134

What is the maximum amount of logical processors that a vSphere Host can have?

A. 8B. 64C. 32D. 128



QUESTION 135What is the maximum amount of LUNS that a vSphere Host can have?

A. 256B. 128C. It depends on whether the Host is using iSCSI or Fibre Channel SAND. 512



QUESTION 136What is the minimum amount of memory recommended for a vCenter 4 server?

A. 1GBB. 3GBC. 2MBD. 2GB

Correct Answer: B




Documents

VMware.Prepking.VCP-510.v2012-01-06.by.WareWolf … · Moved Min/Max to a Exam B. 1. Removed Dupes 2. Added only details to questionable answers 3. Exam A = Real Questions 4. Exam