Marvin Ultimate Lift and Slide

1

Basics

� Marvin Ultimate Lift and Slide

� ULSD

� Stacked Configuration

� ULSS

� Pocket Configuration

2

Pocket Configuration

� ULSP

� Wood or Clad

Basics

� All doors are KD

� Panels are crated

� Units with panels larger than 35.3 ft^2 (5070 panels) will arrive on returnable racking

� Sill and header arrive in separate crate

3

Lift and Slide Features

� Panels

� LVL Cores

� 2 ¾” thick

� Glazing bead

� Standard bead profile: Ogee

Optional profile: Square

4

� Optional profile: Square

� SDL available

� Submit drawing for approval

� Limitations due to handling equipment


� Contemporary and Traditional Panels

� Contemporary panels use 4” stiles / top rail

� 6” bottom rail

� Traditional panels use 6” stiles / top rail

� 8 1/8” bottom rail

Remember, when ordering by CN

5

� Remember, when ordering by CN

� Door styles carry the same CN but width dimensions will be different between panel styles due to interlock overlap


� Glazing

� 1” IG

� Low E – default

� Standard glass options

� No ADL, GBG’s, or grilles

6

Configurations


� All panels are contained within the frame

� At least one stationary panel (OXXX); however, bi-parting units will have two (OX-XO)

� Can be used in more traditional patio door applications

� Shop drawings or worksheets may be more familiar

7

� Shop drawings or worksheets may be more familiar compared to pocket documents

� BMC or other casing options available

Stacked - ULSS

8

Stationary Panel

Head and Foot Bolts

9

Stationary Sill Track

2 panel stacked

Wood Wrapped Aluminum

Wood Wrapped AluminumOn Wood Unit

Configurations

� Pocket Configurations

� All panels operate

� At least one pocket (PXXX) however bi-parting units will have two (PXX-XXP)

� Significant differences regarding site preparation and installation

11

installation

� Seamless transition between interiors and exteriors

Pocket - ULSP

12

Panels in Pocket Position

Basics


� Largest size: Frame OSM 47.1’ x 12.1’

� Minimum size: Panel OSM 30” x 51”

� Pocket Configuration

Largest size: System OSM 60.23’ x 12.1’

14

� Largest size: System OSM 60.23’ x 12.1’Ext Frame 47’ x 12.1’

� Minimum size: Panel OSM 30” x 51”

Basics

� Call Numbers and United Inch (UI) Pricing

� All Lift and Slide pricing is based on UI

� Promoted Sizing makes ordering easy

� Based on nominal panel sizes

�3/0, 4/0, 5/0, and 6/0 widths

7/0, 8/0, and 10/0 heights

15

�7/0, 8/0, and 10/0 heights

� Consistent across Stacked and Pocket configurations

� Up to four panels per operating direction

� Eight for bi-parting doors

Promoted Sizes and Configurations Based On 3/0, 4/0, 5/0, 6/0 Panel Widths

7/0, 8/0, 10/0 Heights

Stacked Configurations

2W

OX / XO

3W

XXO /OXX

4W

OXXX / XXXO

4W

OX-XO L or R

6W

OXX-XXO L or R

8W

OXXX-XXXO L

6070 9070 12070 12070 18070 24070

8070 12070 16070 16070 24070 32070

10070 15070 20070 20070 30070 40070

Stacked Configurations

2W

OX / XO

3W

XXO /OXX

4W

OXXX / XXXO

4W

OX-XO L or R

6W

OXX-XXO L or R

8W

OXXX-XXXO L

6070 9070 12070 12070 18070 24070

8070 12070 16070 16070 24070 32070

10070 15070 20070 20070 30070 40070

16

10070 15070 20070 20070 30070 40070

12070 18070 24070 24070 36070 48070

6080 9080 12080 12080 18080 24080

8080 12080 16080 16080 24080 32080

10080 15080 20080 20080 30080 40080

12080 18080 24080 24080 36080 48080

60100 90100 120100 120100 180100 240100

80100 120100 160100 160100 240100 320100

100100 150100 200100 200100 300100 400100

120100 180100 240100 240100 360100 480100

10070 15070 20070 20070 30070 40070

12070 18070 24070 24070 36070 48070

6080 9080 12080 12080 18080 24080

8080 12080 16080 16080 24080 32080

10080 15080 20080 20080 30080 40080

12080 18080 24080 24080 36080 48080

60100 90100 120100 120100 180100 240100

80100 120100 160100 160100 240100 320100

100100 150100 200100 200100 300100 400100

120100 180100 240100 240100 360100 480100

Promoted Sizes and Configurations Based On 3/0, 4/0, 5/0, 6/0 Panel Widths

7/0, 8/0, 10/0 Heights

Pocket Configurations1 Pocket

2 Panels

(PXX / XXP)

1 Pocket

3 Panels

(PXXX / XXXP)

2 Pockets

2 Panels

(PX-XP)

1 Pocket

4 Panels

(PXXXX / XXXXP)

2 Pockets

4 Panels

(PXX-XXP)

2 Pockets

6 Panels

(PXXX-XXXP)

2 Pockets

8 Panels

(PXXXX-XXXXP)

6070 9070 6070 12070 12070 18070 24070

8070 12070 8070 16070 16070 24070 32070

10070 15070 10070 20070 20070 30070 40070

Pocket Configurations1 Pocket

2 Panels

(PXX / XXP)

1 Pocket

3 Panels

(PXXX / XXXP)

2 Pockets

2 Panels

(PX-XP)

1 Pocket

4 Panels

(PXXXX / XXXXP)

2 Pockets

4 Panels

(PXX-XXP)

2 Pockets

6 Panels

(PXXX-XXXP)

2 Pockets

8 Panels

(PXXXX-XXXXP)

6070 9070 6070 12070 12070 18070 24070

8070 12070 8070 16070 16070 24070 32070

10070 15070 10070 20070 20070 30070 40070

17

10070 15070 10070 20070 20070 30070 40070

12070 18070 12070 24070 24070 36070 48070

6080 9080 6080 12080 12080 18080 24080

8080 12080 8080 16080 16080 24080 32080

10080 15080 10080 20080 20080 30080 40080

12080 18080 12080 24080 24080 36080 48080

60100 90100 60100 120100 120100 180100 240100

80100 120100 80100 160100 160100 240100 320100

100100 150100 100100 200100 200100 300100 400100

120100 180100 120100 240100 240100 360100 480100

10070 15070 10070 20070 20070 30070 40070

12070 18070 12070 24070 24070 36070 48070

6080 9080 6080 12080 12080 18080 24080

8080 12080 8080 16080 16080 24080 32080

10080 15080 10080 20080 20080 30080 40080

12080 18080 12080 24080 24080 36080 48080

60100 90100 60100 120100 120100 180100 240100

80100 120100 80100 160100 160100 240100 320100

100100 150100 100100 200100 200100 300100 400100

120100 180100 120100 240100 240100 360100 480100


� Frame

� All doors – KD

� Jamb depths vary dependent upon operating configuration

� Modular sill system adapts to jamb depth

� Jamb and Header - 1 7/16” thick

18

� Jamb and Header - 1 7/16” thick

Header Splice

Headers on units over 144” will be spliced

19

Clad Splice key

Sills will be spliced when over 23.5 feet

Wood splice is offset from clad splice

Wood Species

20

� Oak and Cherry through Signature

Sills

� Three sill options at initial release

� Sill track height for all sills

� 3/16” above finished floor height

� Sill are anodized aluminum

� Default finish: Bronze Anodized

Optional finish: Mill Anodized

21

� Optional finish: Mill Anodized

� Weatherstrip – Black or beige will default to complement sill finish – sweeps are black or gray to complement sill

Standard Recessed Sill

� Default sill

� No drainage

� If water migrates over track or through interlocks, it has no way to exit – this sill does not offer a performance rating

� Importance of overhangs and proper flooring

22

� Importance of overhangs and proper flooring

� Set expectations

Standard Recessed Sill

Groove

23

Leveling ScrewsAnchor Screws

Slot

Recessed Sill with Drainage

� Optional add to Standard Recessed Sill

� Weep design allows water which migrates to interior of track to weep to exterior

� Site prep requirements for plumbing

� Non-rated for performance

24

Recessed Sill with Drainage

Weep TroughFlexible Drain Tube

25

Weep with Flexible Drain Tube

Receptacle

26

Flexible Drain Tube

Flush Mount Sill

� Best for interior applications

� Site prep is easiest of the three

� No change to floor level and structural load requirements

� Rout floor to allow track base to sit flush

27

Flush Mount Sill

28

Operating Hardware

� Exclusive Standard Interior Flush Mount Handle

� Exclusive Standard Exterior Finger Pull

� Optional Interior Finger Pull

� Multi-point engagement at primary panel

29

Flush Mount Hardware

� Exclusive - Fits neatly into stile edge

� Allows hardware to blend into design

� No need for removable handle to drop on fragile flooring or to misplace

� Panels stack or pocket perfectly

Three finishes – all PVD

30

� Three finishes – all PVD

� Bronze – Default

� SN – Optional

� Brass – Optional

Flush Mount Handle

� Simple, intuitive operation

� Handle operates perpendicular to panel

� Up is locked

�Downward movement unlocks and lifts panel

� When moving into the locked position, detent feature gives positive feedback confirming lock

31

gives positive feedback confirming lock

Exclusive Hardware Design Allows Hardware

to Blend Into Stile Edge

Closed, Dropped, and Locked

Open, Lifted, and Stacked or

Pocketed

32

and Locked Pocketed

Available Finishes:Bronze PVDBrass PVDSN PVD

Finger Pulls

� Finishes complement the Flush Mount Handles

� Standard exterior finger pull

� Allows placement of fingers to move panels into position

� Insertion of finger pulls panels from pocket or stacked positions

33

stacked positions

� Optional Interior finger pull for primary panel

� Allows placement of fingers to move panels

34

Interior Finger Pull(Optional)

Exterior Finger Pull (Standard)

39

40

41

42

43

44

45

46

Site Prep and Installation Handbook

47

56

57

Vert. X-Section Showing Recessed

Drainage SillTRO = Bottom of Slot to

½” above header

System OM = Bottom of sill to top of header

Frame Size (FS) = Finished Floor Height to top of

header

58

Sills and Site Prep

59

Finished Floor Thickness and

Sub-floor Slot Depth

Recessed sills require an overall Slot depth of 25/8”measured from the top of the finished floor. Sub-floor slot dept is

Determined by subtracting finished flooring depth from 2 5/8”

60

Header and Panel Guide

Header cannot deflect more than 1/8” across the span

when fully loaded

Head jamb functions as panel

61

Head jamb functions as panel guide. Distance between sill

and header must be maintained across entire span. Most

call backs are due to header sag which interferes with panel

operation