Embed Size (px)
Citation preview
Ronak ChoudharyB.Eng, Mechanical
(2011)Samples of 3D Modeling carried out
with various software packages
Demonstrating proficiency in Mechanical Design
Pro/Engineer Samples
The following images present samples of work carried out during my final year at university. The objective of this project was to design a transmission system to deliver power from a 2.5 hp engine. Solid modeling was carried out using Pro/Engineer
Various modeling tools were utilized to create complex geometrical shapes and features
Centrifugal Clutch with springs and shaft hole
Nuts and Bolts complete with threads
Shapes were modeled realistically and made visually appealing in order to compete against other design teams
Spur Gears with key holes Roller Bearing assembly complete with cylindrical elements
Coupling, nuts and bolts together in exploded view
Complex geometry was modeled using various tools
Shaft with keys
Various components were accurately assembled to create a transmission
Bearing
Gear
CouplingDriven Shaft
Driving Shaft
Clutch
PinionBearing
The gear housing was designed based on the placement of various transmission components.......
Gearbox with openings for various shafts
...And perfectly accommodated with the transmission
SolidWorks Samples
The following images present samples of work carried out during my Co-op placement at the National Research Council. This was done to document the design of a test rig in great detail with all major and minor components. Solid modeling was carried out using SolidWorks
Small and large components were accurately modeled
Cartridges present within fuel vaporizer
Gasoline Port Fuel Injector
And precisely combined to create sub-assemblies
Cross Sectional and Isometric views: Fuel Injector and Vaporizer combined with various elements to create passageway for fuel flow
Single cylinder research engine and fuel injection system with view of combustion chamber and internal passages
Owing to the large number of components, placement required a great deal of visualization
Spray Chamber with outer and inner views
The positioning of various components and sub-assemblies of the test rig was studied using blueprints such as this.....
Piping and Instrumentation Diagram of the Test Rig
......To create an complete model of the Test Rig
3D Model of the Test Rig
Catia V5 Samples
Over the past few months, I have been learning to use Catia V5. The following images are samples of designing I carried out with the use of tutorials. I have become proficient in the basic tools and functions of Catia V5 and will soon gain expertise with advanced features.
I’m capable of creating basic objects using Catia
Water Bottle Wheel
As well as entities with varying features
Shapes created during interactive tutorials
Ronak Choudhary
B.Eng, Mechanical (2011)
Competencies:
SolidWorks, Pro/Engineer, Catia V5
Phone: (613) 614-9167
Email: [email protected]
LinkedIn: www.linkedin.com/in/ronakc
Capitalize on my talent
