Embed Size (px)
Citation preview
SolidWorks 2011
Hands-on Test Drive
Dassault Systèmes SolidWorks Corp. 300 Baker Avenue Concord, MA 01742 USA Phone: 1 800 693 9000
1 978 371 5011 1 978 371 7303
© 1995-2010, Dassault Systèmes SolidWorks Corporation, a Dassault Systèmes S.A. company, 300 Baker Avenue Concord, Massachusetts 01742 USA.All Rights Reserved.
Dassault Systèmes SolidWorks Corporation DS SolidWorks
DS SolidWorks
DS SolidWorks
Subscription Service Agreement
SolidWorks Standard Premium Professional
US Patents 5,815,154; 6,219,049; 6,219,055; 6,603,486; 6,611,725; and 6,844,877 and certain other foreign patents, including EP 1,116,190 and JP 3,517,643. US and foreign patents pending, e.g., EP 1,116,190 and JP 3,517,643).U.S. and foreign patents pending.
SolidWorks SolidWorks 3D PartStream.NET 3D ContentCentral PDMWorks eDrawings eDrawings DS SolidWorks FeatureManager DS SolidWorks SolidWorks Enterprise PDM SolidWorks Simulation SolidWorks Flow Simulation SolidWorks 2011 DS SolidWorks CircuitWorks Feature Palette FloXpress PhotoWorks TolAnalyst XchangeWorks DS SolidWorks FeatureWorks Geometric Ltd.
COMMERCIAL COMPUTER SOFTWARE - PROPRIETARY. US Government Restricted Rights.Use, duplication, or disclosure by the government is subject to restrictions as set forth in FAR 52.227-19 (Commercial Computer Software - Restricted Rights), DFARS 227.7202 (Commercial Computer Software and Commercial Computer Software Documentation), and in the license agreement, as applicable. Contractor/Manufacturer: Dassault Systèmes SolidWorks Corp, 300 Baker Avenue, Concord, Massachusetts 01742 USA
SolidWorks Standard Premium Professional
Portions of this software © 1990-2010 Siemens Product Lifecycle Management Software III (GB) Ltd. Portions of this software © 1998-2010 Geometric Ltd. Portions of this software © 1986-2010 mental images GmbH & Co.KG. Portions of this software © 1996-2010 Microsoft Corporation.All Rights Reserved. Portions of this software © 2000-2010 Tech Soft 3D Portions of this software © 1998-2008 3Dconnexion. This software is based in part on the work of the Independent JPEG Group.All Rights Reserved. Portions of this software incorporate PhyX™ by NVIDIA 2006-2009. Portions of this software are copyrighted by and are the property of UGS Corp. © 2010. Portions of this software © 2001 - 2009 Luxology, Inc. All Rights Reserved, Patents Pending. Portions of this software © 2007 - 2009 DriveWorks Ltd. Copyright 1984 - 2009 Adobe Systems, Inc. and its licensors.All rights reserved.Protected by U.S. Patents 5,929,866; 5,943,063; 6,289,364; 6,639,593; 6,743,382; Patents Pending.Adobe Adobe Acrobat Adobe PDF Distiller Reader
Adobe Systems Inc.
SolidWorks
SolidWorks 2011 DS SolidWorks
SolidWorks Simulation Portions of this software © 2008 Solversoft Corporation. PCGLSS © 1992 - 2007 Computational Applications and System Integration, Inc. All Rights Reserved. Portions of this product are distributed under license from DC Micro Development, Copyright © 1994 - 2005 DC Micro Development.All Rights Reserved. MKTSWHOTD0411JPN
SolidWorks Engineering Design and Technology Series
i
............................................................................................................ vii .............................................................................................................. vii
...................................................................................................... vii
Hands-on Test Drive............................................................................................1 SeaBotix LBV150......................................................................................................... 3
.......................................................................................... 4 ........................................................................ 5
SolidWorks UI ...................................................... 6 .................................................................................... 6 .................................................................................... 7
.................................................................... 7 ................................................................................ 8
CommandManager................................................................................................. 8 FeatureManager...................................................................................................... 9
...................................................................... 10 ...................................................................................................... 11
.......................................................... 15 ...................................................................................................... 15 ...................................................................................................... 15 ...................................................................................................... 16
SolidWorks .................................................................................... 17 ................................................................................ 18
SolidWorks .............. 19 .................................................................................... 22
.......................................................................................... 23
SolidWorks Engineering Design and Technology Series
ii
........................................................ 24 .................................................................................................. 25
............................................................................................ 26 .......................................................... 27
................................................................................ 28 .................................................................. 29
........................................................................................ 30 ...................................................................... 31
........................................................................................................ 32 Clamp .......................................................................... 33
................................................................................ 34 .................................................................................. 35
........................................................................................ 36 .................................................................. 37
................................................................................ 38 .......................................................................... 39
............................................................................ 40 .......................................................... 40
.............................................. 40 ................................................................ 43
.......................................................... 43 ............................................................................................ 45
...................................................................................... 45 Instant3D..................................................................................................................... 47
Instant3D ............................................................................. 48 Sustainability ............................................................................. 50
SolidWorks Sustainability ....................................................................... 53 ............................................................................................................................ 65
SWIFT™ ........................................................................................................... 66 FeatureXpert ........................................................................ 67
........................................................................................ 68 .............................................................................................. 68
.................................................................................................. 68 Clamp Bar .............................................. 69
................ 70 .......... 71
................................................................ 72 .......................................................... 73
SolidWorks Engineering Design and Technology Series
iii
........................................................................................ 74 .................................................................................. 75
.................................................................................................................... 76 PropertyManager......................................................................................... 76
.................................................................................. 77 SolidWorks ................................................................ 78
.............................................. 79 ............................................................................ 80
Clamp ......................................................... 81 ................................................................ 85
.......................................................... 86 ................................................................................ 87
.............................................................. 88 SolidWorks ............................................................................................ 89
3D ContentCentral .......................... 90 ............................................................................................................................ 95
................................................................................................................ 96 .......................................................................... 97
.................................................................................................................... 99 ........................................................ 100
Defeature ...................................................................................................... 104 Defeature ................................................................................... 105
DimXpert ................................................................................. 109 DimXpert .......................................................................... 111
.......................................................................................................................... 114 .............................................................................................................. 115
...................................................... 115 ............................................................................ 116
.............................................................................. 118 ........................................................................ 119
.............................................................................. 120 .................................................................... 121
.......................................................................... 122 ........................................................ 122
.......................................................................................... 124 .................................................................................... 125
.............................. 126 4 ............ 127
SolidWorks Engineering Design and Technology Series
iv
.......................................................................... 129 ........................................................................ 130
...................................................................................... 133 ................................................................................ 134
.......................................... 136 .................................... 137
...................................................................................................................... 139 ................................................................................ 140
...................................................................................................................... 145 ................................................................................ 146
.................................................................................................. 148 ................................................................ 149
...................................................................................................................... 150 ........................................................ 151
SolidWorks Design Checker..................................................................................... 153 Design Checker ................................................................. 154
.......................................................................................................................... 158 .................................................................................... 159
SolidWorks eDrawings ....................................................... 160 SolidWorks eDrawings ...................................................................................... 160 SolidWorks eDrawings ............................................................. 160 eDrawings ............................. 161
SolidWorks eDrawings ........................................ 163 eDrawings ............................................. 164
SolidWorks eDrawings .............................................................................................. 165
SolidWorks eDrawings ..................... 166 SolidWorks eDrawings ............................................ 168
SolidWorks eDrawings ..................................... 168 DXF ..................................................... 170
DXF ............................................... 171 SolidWorks PhotoView 360 ..................................................................................... 173
SolidWorks PhotoView 360 .................................................. 174 AutoCAD ................................................................................. 181 DraftSight™ - 2D CAD DWG ................................................... 182 SolidWorks Hands-on Test Drive ............................................................ 183
.......................................................................................................................... 184
SolidWorks Engineering Design and Technology Series
v
SolidWorks SimulationXpress........................................................................185 Bent Bar ....................................................................................... 186
.................................................................................................................. 186
.................................................................................................................. 187 .................................................................................. 187
Bent Bar ........................................................................... 189 Bent Bar ........................................................................ 190
SolidWorks SimulationXpress ...................................................................................................... 191
SolidWorks SimulationXpress .................................................................................................... 192
.............................................................................................................. 193 .................................................................................... 194
.............................................................................................................. 195 .................................................................................... 196
.............................................................................................................. 197 Bent Bar ................................................................ 198
.......................................................................................... 199 .................................................................................... 200
.............................................................................................................. 201 .................................................................................... 202
.......................................................................... 205 .................................................................... 206
...................................................................................................................... 208 ................................................................................ 208
.......................................................................................................................... 214
SolidWorks Engineering Design and Technology Series
vi
vii
SolidWorks ®
SolidWorks SolidWorks
SolidWorks SolidWorks Test Drive
David Planchard D&M Education LLC D&M Education 28
5 1
David BSME MSM CSWA David SolidWorks Solution Partner 10
SolidWorks 35
viii
Hands-on Test Drive
SolidWorks ®
- Microsoft ® Windows ®
- 2D 3D
- 3D 2D
- SolidWorks ® Sustainability SustainabilityXpress Sustainability
- SolidWorks ® Intelligent Feature Technology (SWIFT™)
-
- SolidWorks ® eDrawings ® SolidWorks DXF PropertyManager 3D ContentCentral
- SolidWorks PhotoView 360
- SolidWorks ® SimulationXpress
Hands-on Test Drive
Hands-on Test Drive
SeaBotix LBV150 3
SeaBotix LBV150
Hands-on SeaBotix LBV150
SeaBotix "the Little Benthic Vehicle"
3
"the Little Benthic Vehicle" eDrawings ®
SolidWorks Simulation ®
SolidWorks SolidWorks SeaBotix 50
SolidWorks
SeaBotix LBV150
MiniGrab
Bent Bar
View Port
Clamp
Hands-on Test Drive
4
3 3D 3D
SeaBotix LBV150 Clamp Mount Bent Bar
SeaBotix LBV150 1
Clamp Bent Bar
SeaBotix LBV150 MiniGrab
3D 2D
SolidWorks 1
DFMXpress for SolidWorks ®
DFM Design for Manufacturability SolidWorks
Hands-on Test Drive
5
Hands-on Test Drive
6 SolidWorks UI
SolidWorks UI SolidWorks ® Microsoft ® Windows ®
Windows
SolidWorks 2011 UI
SolidWorks CommandManager
(New) -
(Open) -
(Save) -
(Print) -
(Undo) -
(Select) -
(Rebuild) -
(File Properties) -
(Options) - SolidWorks
Hands-on Test Drive
SolidWorks UI 7
SolidWorks
SolidWorks 3
(File) (Edit) (View) (Insert) (Tools) (Window) (Help) (Pin)
SolidWorks
FeatureManager
Hands-on Test Drive
8 SolidWorks UI
SolidWorks Windows
Ctrl+O Ctrl+S Ctrl+X Ctrl+C
SolidWorks
CommandManager
CommandManager
CommandManager
: (Features) (Sketch) (Evaluate) DimXpert
Office (Office Products)
CommandManager
Hands-on Test Drive
SolidWorks UI 9
SolidWorks 2011 - Office
SolidWorks Standard SolidWorks Professional SolidWorks Premium Office CommandManager
FeatureManager
FeatureManager ®
SolidWorks
FeatureManager FeatureManager
FeatureManager
FeatureManager 5
FeatureManager PropertyManager
ConfigurationManager DimXpertManager
DisplayManager
Hands-on Test Drive
10 SolidWorks UI
SolidWorks
(Zoom to Fit)
(Zoom to Area)
(Previous
View)
(Section View)
(View Orientation)
(Display Style)
(Hide/Show Items)
(Edit Appearance)
(Apply Scene)
Hands-on Test Drive
SolidWorks UI 11
(View Setting)
RealView Graphics (Shadows in Shaded
Mode) (Perspective)
(Rotate view)
3D (3D Drawing View) 3D
SolidWorks SolidWorks
(SolidWorks Resources) (Design
Library) (File Explorer)
(View Palette) (Appearances,
Scenes, and Decals) (Custom Properties)
Hands-on Test Drive
12 SolidWorks UI
SolidWorks
SolidWorks
(Getting Started) (Community) (Online Resources) (Tip of the Day)
(Machine Design) (Mold Design) (Consumer Products Design)
4
Routing Toolbox 3D ContentCentral SolidWorks Content
SolidWorks Toolbox (Tools) ..(Add-Ins..)
SolidWorks Toolbox SolidWorks Toolbox Browser CommandManager Office SolidWorks Toolbox
Hands-on Test Drive
SolidWorks UI 13
(File Explorer)
(File Explorer) Windows
SolidWorks
(Search)
SolidWorks 2011 SolidWorks SolidWorks
SolidWorks
SolidWorks
(View Palette)
(View Palette)
(Document Recover)
Hands-on Test Drive
14 SolidWorks UI
(Appearances, Scenes, and Decals)
(Appearances, Scenes, and
Decals)
SolidWorks
2D
(Custom Properties)
(Custom Properties) SolidWorks
Hands-on Test Drive
SolidWorks UI 15
CommandManager
1
SolidWorks
— FeatureManager
— Shift
Ctrl
—
Hands-on Test Drive
16 SolidWorks UI
SolidWorks
SolidWorks
(Help) SolidWorks (SolidWorks Help)
SolidWorks
Hands-on Test Drive
SolidWorks 17
SolidWorks
SolidWorks (Help) SolidWorks
(SolidWorks Tutorials) SolidWorks
(Resources) (Tutorials)
Hands-on Test Drive
18
SeaBotix LBV150 Clamp
SolidWorks SolidWorks
3 Clamp
FeatureManager
4 (Mass properties) (Measurement) (Interference Detection)
(Simulation data)
Hands-on Test Drive
19
SolidWorks
1 SolidWorks Windows (Start)
(All Programs) SolidWorks 2011 SolidWorks 2011
SolidWorks
Hands-on Test Drive
20
2
(New)
SolidWorks
Hands-on Templates Part
SolidWorks
OK
Hands-on Templates
3
(Options) (Document Properties)
-
ANSI
JIS
Hands-on Test Drive
21
(Units)
MMGS(mm g )
.12 4
OK SolidWorks
Hands-on Test Drive
22
2D
3D 2D Clamp
2D
SolidWorks 3 Clamp
2
3 3 2
Hands-on Test Drive
23
1 FeatureManager (Front Plane)
(Sketch)
Hands-on Test Drive
24
SolidWorks
2 1 2 X
Hands-on Test Drive
25
1
(Corner Rectangle)
PropertyManager
CommandManager
2
-
3
4
(Select)
Hands-on Test Drive
26
0,0,0
SolidWorks
SolidWorks
Hands-on Test Drive
27
5
FeatureManager
Ctrl
PropertyManager
Ctrl
(Midpoint) 0
SolidWorks
PropertyManager
6 PropertyManager OK
Hands-on Test Drive
28
SolidWorks
(Smart Dimension)
2 2
CAD
SolidWorks (Smart Dimension)
Hands-on Test Drive
29
1
(Smart Dimension)
(Modify)
55mm
(Modify) 55mm
(Smart Dimension)
2
f
3
(Modify)
20mm
4
(Smart Dimension) Esc
Hands-on Test Drive
30
1. 2. 2D 3.
2D
Hands-on Test Drive
31
1 CommandManager (Features)
(Extruded Boss/
Base) - PropertyManager
2 1
(Mid Plane)
(Depth) 32mm (Depth)
10mm
3 - PropertyManager OK
- 1
Instant3D
Hands-on Test Drive
32
SolidWorks
SolidWorks Test Drive
SolidWorks
