Embed Size (px)
Citation preview
Tooling Materials Used In Reaction Injection Molding Factory
www.honkia.com
Silicone rubbers are used in making Reaction Injection Molding Factory as it is equipped with
very low quantities of
dimensionally non-critical parts.
www.honkia.com
Resin molds are used for components requiring more detail and better
physical properties.
These urethane and epoxy resin molds are processed with foamed urethane systems.
www.honkia.com
One of the advantages of Reaction Injection Molding Factory processed foam is that a high-density skin is formed with a low-density
core.
www.honkia.com
Spray metal molds offer better control of surface quality and enhanced moldability.
This mold-building technique bridges the gap between low-volume prototype and medium production tooling.
www.honkia.com
A composite system with an epoxy and aluminum chip mixture acts as the backup structure for the thin metal
surface.
Aluminum frames are cast to act as a mold base for
mounting ejector systems, mix head, side pulls, and to
ultimately mount to a production press.
www.honkia.com
Aluminum is a must be material to be used because it has the maximum
physical properties of the urethane material system.
www.honkia.com
A properly cooled aluminum mold is able to control the heat of reaction during the molding
process. It is not allow exotherm overrun and hot spot induced internal stresses.
www.honkia.com
Contact Us
HONKIA PROTOTYPE CO., LIMITEDShenzhen factory : 6 Tianyang 7 Road, Datianyang Industrial Park Songgang,
Baoan, Shenzhen 518105, China Tel : +86 755 2369 8005 Fax : +86 755 2945 7540
Skype : andy.rapid.prototypeEmail : [email protected]
Hong Kong address : Unit 2508A, 25/F, Bank of America Tower12 Harcourt Road, Central, Hong Kong
www.honkia.com
You can find Reaction injection molding factory in
www.honkia.com as they are one of the best manufacturers and providers of such oil
refining machine with various specifications.
www.honkia.com
