Proprietor : Sandeep Budhavale

CONSTRUCTION MATERIAL WHICH WE SUPPLY

FLYASH. FLYASH BRICK. CELLULAR LIGHT WEIGHT BLOCKS. AUTOCLAVED AERATED CONCRETE

BLOCK SOLID CONCRETE BLOCKS. AGGREGATE ( 10MM , 20MM & CR.

SAND ) SILPOZZ SAND. MORTAR. READY MADE PLASTER. READY MIXED CONCRETE. GROUND GRANULATED BLAST

FURNANCE SLAG.

PRODUCT DETAILS

Fly ash is a product of burning finely ground coal in a boiler to produce electricity. It is removed from the plant exhaust gases primarily by electrostatic precipitators, or baghouses and secondarily by scrubber systems. Physically, fly ash is a very fine, powdery material, composed mostly of silica nearly all particles are spherical in shape. Fly ash is generally light tan in colour and consists mostly of silt-sized and clay-sized glassy spheres. This gives fly ash a consistency somewhat like talcum powder.Fly ash is a pozzolan, a siliceous material which in the presence of water will react with calcium hydroxide at ordinary temperatures to produce cementitious compounds. Because of its spherical shape and pozzolanic properties, fly ash is useful in cement and concrete applications. The spherical shape and particle size distribution of fly ash also make it a good mineral filler in hot mix asphalt applications and improve the fluidity of flowable fill and grout when it is used for those applications.

FLYASH

FLYASH BRICK Fly Ash Brick Size Details :

Size [6 Inches ] :- 230 x 150 x 80 mm230 x 150 x 100 mm 

Size [4 Inches ] :- 230 x 100 x 75 mm230 x 100 x 100 mm Can be available in other suitable sizes depending on the quantity.

(2) Compressive Strength : Avg. 7.5 N / Sq.mm.( As against 3.5 N/Sq. mm for handmade clay bricks )

(3) Water Absorption : 8-12 % ( As against 20 to 25% for clay bricks )

(4) Efflorescence : Nil

(5) Density : 1700 Kg/m3

(6) Weight: 230x150x80 mm ( Weight about 5.0 to 5.20 kgs. )230x150x100 mm ( Weight about 7.20 to 7.50 kgs. )230x100x75 mm ( Weight about 3.40 to 3.50 kgs. )230x100x100 mm ( Weight about 4.50 to 4.60 kgs. )

(7) Composition :-(i) Cement : Birla Super Cement OPC 53 Grade(ii) Thermal Station Fly Ash(iii) Crushed Sand / Stone Dust

(8) Thermal Conductivity : - 0.90 – 1.05 W/m2 0 C ( 0.75 – 0.90 K cal/m2 hr 0C )

(9) Drying Shrinkage :- Maximum Average drying test shrinkage 0.035-0.04 %

(10) Brick Colour :- Gray / Dark Gray

CELLULAR LIGHT WEIGHT BLOCK

Parameters CLC Blocks

Basic raw materials Cement, fly ash, water and foam

Production process and set-up

Using ribbon mixer and foam generator

Dry density kg/m³ 600/ 800

Compressive Strength kg/cm2

30- 40

Usage Thermal insulation , partitions, non-load bearing blocks

Aging Gains strength with age (like conventional concrete)

Thermal conductivity (W/mK)

0.09 – 0.12 (depending on density)

Eco friendliness - Pollution free- No primary energy consumption- Consumes fly ash (an hazardous industrial waste material)

AUTOCLAVED AERATED CONCRETE BLOCK Aerated Light Weight Concrete Building

Material is acclaimed and proved the world over as an environment friendly and is already in use in our country. The product confirms to ISI (BIS) standards and certification and these standards cover design, manufacturing and performance load testing. The compressive strength of “Power Block” is as per IS 2185 >3

Manufactured in a sophisticated plant under carefully monitored conditions, “Power Block” is easy to handle, hoist and transport. The advantages of aerated concrete building material is the versatility of use of the end products – blocks, floors, roof material, wall panels. It can constitute the entire structure of low rise buildings upto two storeys.

Aerated concrete building material eliminates wastes at work site and being absolutely inert does not emit toxic gases even when open to the element fire.

SOLID CONCRETE BLOCK

Customers can avail from us a discursive range of Solid Concrete Blocks, which is economical, and environmental friendly. Furthermore, it is considered as an alternative to the traditional material used for making walls. To give a regular shape and uniform performance mansory unit, it works on the principle of intensification of lean concrete mix. For the convenience of clients, these blocks can also be customized at affordable prices.Size Dimension

W X H XWeight in Kg (Approx)

No. Of blocks per 100 Sq.Ft

3” 75*190*390

9.5 115

4” 90*190*390

13.5 115

5” 115*190*390

17.5 115

5” 125*190*390

19.5 115

6” 140*190*390

21.5 115

8” 190*190*390

30.5 115

Technical Specification:As per IS 2185Density: 1800 – 2200KG/M3Water Absorption: Less Than 10%Compressive Strength: 50 KG/CM2

AGGREGATES Our clients can avail from

us a wide range of 10 mm,20mm & Cr.Sand Aggregates. The resistance of an aggregate to impact or sudden shock is measured with the help of aggregate impact value of coarse. These material are widely used for construction purposes. We are capable of offering Aggregates in bulk quantity as per the requirements of the clients. Aggregates are a mixture of different types of construction material.

SILPOZZ SAND It is natural sand which is

directly collected from River bank and it contains black, gray and brown coloured sand mixtures. It is granular form. It contains impurities like Silt, Salt, Sea Salt and organic impurities.

We have sources for collection of Natural River Sand, Washing of Natural Sand with soft. Sweet water, Screening to achive consistence uniform size and quality. Drum mixture for perfect mixing and packing plant.

Our plant present capacity is to produce 1000mt/Day.

JOINTING MORTAR JOINTING MORTARJointing Mortar is a thin bed, high strength, pre-

mixed, quality assured mortar comprising of ordinary Portland Cement, specially graded sand and Polymers. It is specially formulated and easily applied, giving a better bonding with higher air entraining properties. “Jointing Mortar” is a masonary mortar for use in laying various types of fly ash / concrete bricks, AAC blocks and stones. It replaces conventional jointing mortar of 12-18 mm thickness with highly versatile 3-4 mm thickness mortar.

Areas of Use: Laying bricks and blocks: To join fly ash bricks, cement block, hollow

blocks, aerated block etc. Jointing of prestressed concrete

slabs,panels. Jointing of cement window and door frames. Barbecues and fire places. Garden and boundry walls. Screed and compost bins, sand pits. Bench stands, bicycle stands. Terracing. Ornamental Pools. Repairing of masonry walls.

READY MADE PLASTER

Ready Made Plaster Plaster is a strong, durable pre-mixed

powder suitable for plastering over all types of old or new conventional clay bricks, fly ash bricks / blocks and Autoclaved Aerated Concrete blocks (AAC). It is normally applied to masonary interiors and exteriors to achieve a smooth surface.

Area of Use: Under coating and plastering over

existing concrete and brick/block walls. Use as a levelling plaster for correction

of surface undulation in bare concrete block and other cementitious substrates.

Basic levelling of concrete, light weight blocks and bricks.

Filling holes and irregularities, levelling walls and ceilings.

Create a leveled surface from uneven or concrete wall.

READY MIXED CONCRETE &

BUCKET CONCRETE Ready Mix Concrete, or RMX as it is popularly called, refers

to concrete that is specifically manufactured for delivery to the customer's construction site in a freshly mix and plastic or unhardened state. Concrete itself is a mixture of Portland Cement, water and aggregates comprising sand and gravel or crushed stone. In traditional work sites, each of these materials is procured separately and mix in specified proportions at site to make concrete. Ready Mix Concrete is bought and sold by volume - usually expressed in cubic meters. RMX can be custom-made to suit different applications.

Bucket Concrete A revolutionary way to use Ready Mix Concrete. No

minimum quantities, a clean packaging,factory made concrete, ready to use for all your needs and bringing the quality of RMC to sites of any size.

Mega Bucket Concrete is delivered in 15 Itrs bucket (36kg) at your site or picked up at any of our plants.Application : Columns, small slabs, site with difficult access, repairsAdvantage:Guaranteed slump 1 50 mm 3 hours after production Available in M10, M20 and M30 grades

Can be transported on any vehicle No minimum quantity Clean recyclable and returnable containers Avoid any wastage by getting the exact quantity needed 

GROUND GRANULATED BLAST

FURNANCE SLAG Product Description: The Ground Granulated Blast Furnace Slag (GGBS) is a type of eco-friendly green building material and high

quality secondary cementitious material for concrete and cement. It is recognized as one of the best secondary cementitious material for building high durable concrete strecture in the world today !GGBS has taken over top place of high-performance cement and concrete mineral additives with its unique characteristics of hydration,low-price raw material. GGBS is obtained by quenching molten iron blastfurnace slag (a by- product of iron and steel making) in water or steam. It is then further grounded into the desired fineness in terms of the required particle size distributionm. 2. Applications & Benefits For the product: Ⅰ. High-performance concrete additive, especially suitable for: A. Preparation of the harbor and marine concrete structures with high resistance to corrosion by chloride ion. B. Preparation of corrosion resistant concrete, improving durability of concrete structure in soleplate salt and alkali regions. C. Preparation of concrete which provides effective prevention measures for the potential active alkali-aggregate reactions in concrete. D. Preparation of low heat concrete which, effectively reducing the risk of temperature cracks in early period of the mass concrete structure. E. Preparation of pumping concrete to effectively reduce the slump loss in the construction in summer, hence improving the workability of concrete. F. Preparation of self compacting concrete to have effective control on bleeding and segregation of high fluidity concrete. Ⅱ, Super-reactive cementitious additives, especially suitable for: A. Production of medium content (30-50%) slag cement, improving the strength of all ages.B. Production of low heat cement with high GGBS substitutions (50-70%), used for mass or port/marine concrete structures. 3. Capacity: 25MT into 1X 20" GP 4. Chemical Composition: Granulated blast furnace slag powder technical indicators Inspection items Level S105 S95 S75 density of the： g/cm3 Not less than 2.80 Specific surface area:m2/kg Not less than 500 400 300 Active index:% Not less than 7 day 95 75 55 28 day 105 95 75 Fluidity than:% Not less than 95 Water content:% Not less than 1.0 Sulphur trioxide:% Not less than 4.0 Chloride ion:% Not less than 0.06 Loss on ignition:% Not less than 3.0 Note: Higher level of slag powder can be produced according to customer requirements Packing:① Bulk;②50kg Bag;③1000kg Bag Granulated blast furnace slag powder chemical composition : (%) Chemical Constituents SiO2 CaO MgO Al2O3 MnO TiO2 Fe2O3 40 About 45 About 8.0 About 12.0 About 0.2 About 0.4 Abou 0.3 About

TRANSPORT DIVISION

1.TRANSIT MIXER

2.BULKER3.TRUCKS4.CONTAINERS

EXPORTS FROM INDIA VIA SEA

CONTACT USCONTACT USFA/51 LAKE CITY MALLNEXT TO BIG BAZAARFIRST FLOORKAPURBAUDITHANE (E) – 400 607CONTACT NO: 02241233496CELL NO : 9821112235 / 9987471999EMAIL ID : info@bhoomitradingflyash.comWEBSITE : www.bhoomitradingflyash.com