Upload
phil-heft
View
62
Download
0
Embed Size (px)
Citation preview
320 s
eries
CONTENTS
GENERAL CHARACTERISTICS 1
PART NUMBER SYSTEM 2
SPECIFICATION 3 Jackscrews Special contacts
320 SERIES CONNECTORS 4
CHARACTERICS 13 Special contacts
COAX Contacts 14
POWER CONTACTS 16
Tooling 61
www.ati-electronique.fr
General characteristics
MaterialsMouldings: Glass-fi lled
thermoplastic UL94V-0Female Contacts: Brass shell, with beryllium copper
inner contactMale Contacts: Phosphor bronzeFinish: See individual pages
ElectricalCurrent (individual contacts in isolation): At 25°C 3.3A max
At 85°C 2.6A maxAll contacts simultaneously: At 25°C 3.0A max
At 85°C 2.2A maxWorking Voltage(at sea level 1013 mbar) 240V d.c. or a.c. peakProof voltage(at sea level 1013 mbar) 360V d.c. or a.c. peakContact resistance (initial) 20 milliohms max.Contact resistance(after conditioning) 25 milliohms max.Insulation resistance (intial): 1000 Megohms min at 500V d.c.Insulation resistance(after conditioning): 100 Megohms min at 500V d.c.
MechanicalDurability: 500 operationsEngaging and separatingforce (per contact pair): 1.0N max, 0.2N minContact retention in moulding: 10N min.Contact holding force: 0.2N min.Crimp barrel accommodation: 22 A.W.G. to 28 A.W.G.
EnvironmentalEnvironmental classifi cation: 55/125/56 days at 95% RHOperational temperature: – 55ºC to 125ºCVibration sensitivity: 10Hz to 2000Hz, 0.75mm, 98mm/s2
(10G). duration 6hBump severity: 390m/s2 (40G), 4000± 10 bumpsShock severity: 981m/s2 (100G) for 6msAcceleration severity: 490m/s2 (50G)
1
32
0 s
erie
s
2
www.ati-electronique.frAll dimensions in mm.
320 seriesMixed Technology Series
PRODUCT RANGE
NO. OF SIGNAL CONTACTS
NUMBER OF SPECIAL CONTACTS FROM SIGNAL CONTACT NO. 1 SIDE
PART NUMBERING SYSTEM
TERMINATION STYLE FINISHY5 Vertical PC Tail, 3mm tail Gold
Y6 Vertical PC Tail, 4.5mm tail Gold
V5 Horizontal PC Tail, 4mm tail Male only Gold
C1 Crimp 24-28 AWG (Small Bore) Female only Gold
D1 Crimp 22 AWG (Large Bore) Female only Gold
GENDERF Female (Socket)
M Male (Plug)
NUMBER OF SPECIAL CONTACTS ON OPPOSITE SIDE
JACKSCREW VARIANT (see following page)0 None assembled
A Hexagonal slotted jackscrew Female only
H Hex socket jackscrew Female only
C Panel Guide Female only
Y Jackscrew nut only Male only
P Jackscrew nut with vertical 3.5mm board mount stud Male only
Q Jackscrew nut with vertical 5mm board mount stud Male only
S Jackscrew nut with horizontal 5mm board mount bolt Male only
320 – X XXX XX X XXXX XX
PART NUMBER OF SPECIAL CONTACTSee following page, or 00 if none loaded
32
0 s
erie
s
www.ati-electronique.fr
333
All dimensions in mm.
MALE FEMALE30, 31
CO
AX
40,41
15, 16, 17
70, 71 75, 76
PO
WER
80, 81
65, 66, 67
320 seriesSPECIFICATION
NONE ASSEMBLED (MALE & FEMALE)
0
FOR MALE ASSEMBLIES
Y
Jackscrew Nut Only
Pages 4 to 7
PorQ
Jackscrew Nut with Vertical
Board Mount Stud
Page 4
S
Jackscrew Nut with Horizontal
Board Mount Stud
Page 5 to 7
FOR FEMALE ASSEMBLIES
A
Hexagonal Slotted Jackscrew
Pages 8 to 12
H
Hex Socket Jackscrew
Pages 8 to 12
C
Guide Pin
Pages 8 to 12
JACKSCREWS SPECIAL CONTACTS
Pages 4 to 7
*See following pages for dimensional information. *See pages listed above for dimensional information.
Page 14Pages 8 to 12
Page 14
Page 16
Page 16
Page 17
Page 17
Page 15
3
32
0 s
erie
s
www.ati-electronique.fr
4
All dimensions in mm.
HOW TO ORDER
MALE VERTICAL
320 seriesMale Vertical
Choice of compatible jackscrews and special contacts. All contacts are gold fi nish for full RoHS compliance. Contact [email protected] for alternative contact confi gurations.
Diagrams shown with special contact 70 and Jackscrew P assembled.
SERIES CODE SPECIAL CONTACTS30, 31, 70, 71
TAILY5 3mm Tail
Y6 4.5mm Tail
320 M 008 YX X 0400 XX
JACKSCREW0 No Jackscrew
Y Jackscrew Nut
P 3.5mm Board Mount
Q 5mm Board Mount
Recommended PC Board Pattern
14.0023.00
2.00
1.00
7.70 6.10
TailBoardMount
3.00
M2
M22.00
4.00
29.00ø4.00
ø0.49
ø1.50 Power Contact
No. 1 Contact
ø0.65 MIN
2.00
14.00
23.00
2.00
1.00 4.00
12.00 ø1.60 MIN
ø2.20 MIN
NO. OF L.F. CONTACTS
32
0 s
erie
s3
20
se
ries
55
www.harwin.com All dimensions in mm.www.ati-electronique.fr
HOW TO ORDER
SERIES CODE
NO. OF L.F. CONTACTS018, 027, 036, 048, 060, 096
320 M XXX V5 X
JACKSCREW0 No Jackscrew
Y Jackscrew Nut
S 5mm Board Mount
320 seriesMale Horizontal
Choice of compatible jackscrews. All contacts are gold fi nish for full RoHS compliance. See pages 6 and 7 for confi gurations including special contacts. Contact [email protected] for alternative contact confi gurations.
MALE HORIZONTAL CALCULATIONA B + 15
B (No. of L.F. contacts – 3) x 2/3
C B + 9
Diagrams shown with Jackscrew S assembled. Recommended PC Board Pattern
B
C
A
2.00
0.65
7.70
7.002.00
M2
M2
ø0.50 2.00
No. 1 Contact
C2.00
2.00
Bø0.65 MINø2.20 MIN
TAILV5 4mm Tail
5
32
0 s
erie
s
32
0 s
eri
es
www.ati-electronique.fr
6
All dimensions in mm.
HOW TO ORDER
SERIES CODE SPECIAL CONTACTS40, 41, 80, 81
320 M XXX V5 X 0101 XX
JACKSCREW0 No Jackscrew
Y Jackscrew Nut
S 5mm Board Mount
320 seriesMale Horizontal
Choice of compatible jackscrews and special contacts. All contacts are gold fi nish for full RoHS compliance. See page 5 for a signal-only confi guration, and page 7 for an alternative mixed technology confi guration.
Contact [email protected] for alternative contact confi gurations.
MALE HORIZONTAL CALCULATIONA B + 15
B (No. of L.F. contacts + 5) x 2/3
C B + 9
Diagrams shown with special contact 80 and Jackscrew S assembled.
B
C2.00
1.00
7.70
0.65
2.00ø1.50 Power Contact
M2
M27.00
ø0.502.00
A
3.00
No. 1 Contact
B
C
2.002.00
2.00
2.40
3.00
ø2.20 MIN
ø0.65 MIN
ø1.60 MIN
Recommended PC Board Pattern
NO. OF L.F. CONTACTS019, 025
TAILV5 4mm Tail
32
0 s
erie
s3
20
se
ries
77
www.harwin.com All dimensions in mm.www.ati-electronique.fr
HOW TO ORDER
SERIES CODE SPECIAL CONTACTS40, 41, 80, 81
320 M 013 V5 X 0302 XX
JACKSCREW0 No Jackscrew
Y Jackscrew Nut
S 5mm Board Mount
320 seriesMale Horizontal
Choice of compatible jackscrews and special contacts. All contacts are gold fi nish for full RoHS compliance. See page 5 for a signal-only confi guration, and page 6 for an alternative mixed technology confi guration.
Contact [email protected] for alternative contact confi gurations.
MALE HORIZONTAL
Diagrams shown with special contact 80 and Jackscrew S assembled. Recommended PC Board Pattern
20.0029.00
2.00
1.00
7.70
0.652.00
ø1.50Power
Contact
M2
M2
ø0.503.002.00
35.00
7.00
No. 1 Contact
2.00
20.00
29.00
2.002.40
4.00
18.00
ø2.20 MIN
ø0.65 MIN
ø1.60 MIN
3.002.00
NO. OF L.F. CONTACTS
TAILV5 4mm Tail
7
32
0 s
erie
s
32
0 s
eri
es
www.ati-electronique.fr
8
All dimensions in mm.
SERIES CODE
TAILY5 3mm Tail
Y6 4.5mm Tail
320 F XXX YX X
NO. OF L.F. CONTACTS027, 036, 048
JACKSCREW0 No Jackscrew
A Hex Slotted Jackscrew
H Hex Socket Jackscrew
C Guide Pin
HOW TO ORDER
320 seriesFemale Vertical
Choice of compatible jackscrews. All contacts are gold fi nish for full RoHS compliance. See pages 9 and 10 for confi gurations including special contacts.
Contact [email protected] for alternative contact confi gurations.
FEMALE VERTICAL
Diagrams shown with Jackscrew H assembled.
B
C
8.00
2.00
M2
4.50
3.85
Tail
ø0.50
2.00
A
No. 1 Contact
B
2.00
MINJACKSCREWø3.70
2.00 MINø0.65
C
Recommended PC Board Pattern
CALCULATIONA B + 15
B (No. of L.F. contacts – 3) x 2/3
C B + 9
32
0 s
erie
s3
20
se
ries
99
www.harwin.com All dimensions in mm.www.ati-electronique.fr
HOW TO ORDER
320 seriesFemale Vertical
Choice of compatible jackscrews and special contacts. All contacts are gold fi nish for full RoHS compliance. See page 8 for a signal-only confi guration, and page 10 for an alternative mixed technology confi guration.
Contact [email protected] for alternative contact confi gurations.
FEMALE VERTICAL
SERIES CODE
TAILY5 3mm Tail
Y6 4.5mm Tail
320 F XXX YX X 0101 XX
NO. OF L.F. CONTACTS019, 025 JACKSCREW
0 No Jackscrew
A Hex Slotted Jackscrew
H Hex Socket Jackscrew
C Guide Pin
SPECIAL CONTACTS35, 36, 75, 76
Diagrams shown with Jackscrew H assembled.
B
C
1.00
2.00
2.00
M2
2.00 A/Fø3.50
3.00
2.00
A
ø0.50
POWER CONTACTø1.50
Tail
3.858.00
4.50
No 1 Contact
B
C
2.00
3.00
2.00
1.002.00
ø3.70 MIN
ø0.65 MIN
ø1.60 MIN
Recommended PC Board Pattern
CALCULATIONA B + 15
B (No. of L.F. contacts + 5) x 2/3
C B + 9
9
32
0 s
erie
s
32
0 s
eri
es
www.ati-electronique.fr
10
All dimensions in mm.
HOW TO ORDER
320 seriesFemale Vertical
Choice of compatible jackscrews and special contacts. All contacts are gold fi nish for full RoHS compliance. See page 8 for a signal-only confi guration, and page 9 for an alternative mixed technology confi guration.
Contact [email protected] for alternative contact confi gurations.
FEMALE VERTICAL
SERIES CODE
TAILY5 3mm Tail
Y6 4.5mm Tail
320 F 013 YX X 0302 XX
NO. OF L.F. CONTACTSJACKSCREW0 No Jackscrew
A Hex Slotted Jackscrew
H Hex Socket Jackscrew
C Guide Pin
SPECIAL CONTACTS35, 36, 75, 76
Diagrams shown with special contact 75 and Jackscrew C assembled.
Recommended PC Board Pattern
20.00
29.00
1.00 2.00
2.00
ø1.50
3.70
2.003.00
4.00
35.00
8.00 3.85
4.50
Tailø0.50
ø1.50 Power Contact
No 1 Contact
ø0.65 2.00
20.00
2.00
1.00
4.003.00
18.00
2.00ø1.60
32
0 s
erie
s3
20
se
ries
1111
www.harwin.com All dimensions in mm.www.ati-electronique.fr
FEMALE CRIMP CRIMP CONTACTS
320 seriesFemale Crimp
SERIES CODE
CRIMPSC1 Small Bore
D1 Large Bore
320 F XXX X1 X
JACKSCREW0 No Jackscrew
A Hex Slotted Jackscrew
H Hex Socket Jackscrew
C Guide Pin
HOW TO ORDER
NO. OF L.F. CONTACTS018, 054, 060, 096
Diagrams shown with Jackscrew H assembled.
TOOLS
ø 1.1 Max.
2.0 Nominal
Recommended Crimp Tool – M22520/2-01 Positioner – MP6818Contact Insertion/Removal Tool – 220S03 See pages 18 to 19
WIRE STRIPPING DETAILS
Choice of compatible jackscrews. All contacts are gold fi nish for full RoHS compliance. See page 12 for confi gurations including special contacts. Contact [email protected] for alternative contact confi gurations.
B
C
A
2.00 2.00
M2
6.70
3.85
8.00
No. 1 Contact
7.45
CALCULATIONA B + 15
B (No. of L.F. contacts – 3) x 2/3
C B + 9
Large Bore (22 AWG):
Small Bore (24-28 AWG):
SMALL BORE IDENT GROOVE
11
32
0 s
erie
s
32
0 s
eri
es
www.ati-electronique.fr
12
All dimensions in mm.
SERIES CODE
CRIMPSC1 Small Bore
D1 Large Bore
320 F XXX X1 X XXXX XX
008 0400019 0101
SIGNAL/SPECIAL CONFIGURATIONS
JACKSCREW0 No Jackscrew
A Hex Slotted Jackscrew
H Hex Socket Jackscrew
C Guide Pin
HOW TO ORDER
SPECIAL CONTACTS15, 16, 17, 65, 66, 67
320 seriesFemale Crimp
08 – 0400 CONFIGURATION 19 – 0101 CONFIGURATION
CRIMP CONTACTS TOOLS
WIRE STRIPPING DETAILSø 1.1 Max.
2.0 Nominal
Recommended Crimp Tool – M22520/2-01 Positioner – MP6818Contact Insertion/Removal Tool – 220S03 See pages 18 to 19
Choice of compatible jackscrews and special contacts. All contacts are gold fi nish for full RoHS compliance. See page 11 for signal-only confi gurations. Contact [email protected] for alternative contact confi gurations.
7.45
2.0014.0023.00
2.00
1.00
4.00
M2
2.00 A/Fø3.50
29.00
8.00 3.85
6.70
No. 1 Contact
2.0016.0025.00
2.00
1.00 2.00M2
14.002.00 A/Fø3.50
31.00
8.00 3.85
6.70
No. 1 Contact
Large Bore (22 AWG):
Small Bore (24-28 AWG):
SMALL BORE IDENT GROOVE
32
0 s
erie
s3
20
se
ries
www.ati-electronique.fr
131313
All dimensions in mm.
Special Contacts
MaterialsRetaining clip: Beryllium copper,
nickel plated
Other metallic parts: Copper alloy, Gold plated
Insulator: PTFE
Electrical Operating voltage (sea level): 180V a.c. Rms under 500 mA
Maximum voltage (sea level): 1000V a.c. Rms
Contact resistance: 6 m� max
Insulation resistance: 106 M� at 250V a.c. Rms
Electrical (coaxial contacts)Frequency range: 6 GHz (depending on cable)
Impedance: 50 Ohms
V.S.W.R.: < 1.35
MechanicalEndurance: 500 cycles
Insertion force: 5N max, 0.6N min
Withdrawal force: 2N max, 0.5N min
Contact replacement in connector: 5 times
EnvironmentalOperating temperature: -55°C to +125°C
Salt spray test: 96 hrs
Humidity test: 56 days
CHARACTERISTICS
13
32
0 s
erie
s
www.ati-electronique.fr
14
All dimensions in mm.
Coax ContactsMale PC Tail
6 GHz coaxial performance. For specifi cation see page 13. 50 Ohms impedance.
VERTICAL
HORIZONTAL
square 3.00
Tail 0.30
5.10
2.00
2.00
TAIL LENGTH
ORDER CODE (LOOSE)
PART CODE (FITTED)
3.0mm 220M30* 30
4.5mm 220M31* 31
2.00 1.00
3.00 Tail
.00 3
6.10 5.10
2.50
TAIL LENGTH
ORDER CODE (LOOSE)
PART CODE (FITTED)
3.0mm 220M40* 404.5mm 220M41* 41
* Not available for sale
* Not available for sale
32
0 s
erie
s
1515
www.harwin.com All dimensions in mm.www.ati-electronique.fr
Coax ContactsFemale Crimp
6 GHz co-axial performance. 50 Ohms impedance. Contacts are removable using extraction tool 220 S07 (see page 19).
CRIMP STRAIGHT
4.00 1.00
1.70
WIRE STRIPPING DETAILS
6.70 1.305.40
3.00 square
CABLE DIAMETER
ORDER CODE (LOOSE)
PART CODE(WITH ASSEMBLY)
2.0mm 220F15 152.4mm 220F16 162.7mm 220F17 17
15
32
0 s
erie
s
www.ati-electronique.fr
16
All dimensions in mm.
Power ContactsMale PC Tail
20A max current rating.
square3.00
Ø1.50
Tail 0.30
5.10
TAIL LENGTH
ORDER CODE (LOOSE)
PART CODE (FITTED)
3.5 mm 220M70* 705.0 mm 220M71* 71
5.10 6.10
3.00
Ø 1.50
Tail
2.50
3.00
TAIL LENGTH
ORDER CODE (LOOSE)
PART CODE (FITTED)
3.5 mm 220M80* 805.0 mm 220M81* 81
VERTICAL
HORIZONTAL
Position : see page 4
Position : see page 4
* Not available for sale
* Not available for sale
32
0 s
erie
s
1717
www.harwin.com All dimensions in mm.www.ati-electronique.fr
Power ContactsFemale
20A max current rating. Crimp Contacts are removable using extraction tool 220 S07 (see page 19).
VERTICAL PC TAIL
CABLE DIAMETER
(MAX)AWG CURRENT
RATINGORDER CODE
(LOOSE)PART CODE
(WITH ASSEMBLY)
2.3mm 12 20A 220F65 65
2.0mm 14 15A 220F66 66
1.5mm 16 10A 220F67 67
6.000.50
6.70
3.00 square
3.00 square
0.30
4.60
Ø1.50
Tail
TAIL LENGTH
ORDER CODE (LOOSE)
PART CODE (FITTED)
3.5mm 220F75* 75
5.0mm 220F76* 76
SOLDER STRAIGHT
* Not available for sale
17
32
0 s
erie
s
18
www.ati-electronique.fr
18
All dimensions in mm.
320 series Tooling
POSITIONER
POSITIONER
ORDER CODEFemale crimp MP6818
Used with hand crimp tool shown opposite. Standard circular crimp tool BS5210-3A-300 and MIL specifi cation M22520/2-01.
Precision tool with ratchet mechanism and 8-indent form.
Must be used with positioner opposite. Instruction sheet available.
Used with hand crimp tool shown opposite. Standard circular crimp tool. Precision tool with ratchet mechanism and 8-indent form.
Must be used with positioner opposite. Instruction sheet available.
ORDER CODESignal contacts M22520/2-01
ORDER CODEInner contact of coax contacts 220S04
HAND CRIMP TOOL
HAND CRIMP TOOL
Standard circular crimp tool BS5210-3A-300 and MIL specifi cation M22520/2-01.
Precision tool with ratchet mechanism and 8-indent form.
Must be used with positioner opposite. Instruction sheet available.
ORDER CODEInner contact of coax contacts MH800
Standard circular crimp tool. Precision tool with ratchet mechanism and 8-indent form.
Must be used with positioner opposite. Instruction sheet available.
32
0 s
erie
s
1919
www.harwin.com All dimensions in mm.www.ati-electronique.fr
19
320 series Tooling
REMOVAL TOOL
ORDER CODEOuter sleeve of coax contacts 220S05Crimp tool HX3
Standard coax crimp tool for crimping the outer sleeve of coax contacts.
Instruction sheet available.
For inserting crimped contacts into the rear of mouldings.
Instruction sheet available. Suitable for all signal contacts.
To aid removal of special cable contacts from connectors.
ORDER CODESignal crimps 220S03
HAND CRIMP TOOL INSERTION/REMOVAL TOOL
ORDER CODESpecial cable connectors 220S07
19
32
0 s
erie
s
20
www.ati-electronique.fr
20
All dimensions in mm.
This catalogue only refers to the standard types.ATI also realizes any special connector and any coaxial cable installation on request.
Please, take advice.
Adress all correspondence to :ATI - 91031 EVRY Cedex - [email protected]
32
0 s
erie
s
6 rue Jean Mermoz - ZA de St-Guénault91080 COURCOURONNES - FRANCE
Tél. : 33 (0)1 69 36 94 00 - Fax 33 (0)1 64 97 14 84Courriel : [email protected]
www.ati-electronique.fr