View
33
Download
0
Embed Size (px)
Citation preview
Sto-away Power Cranes, Inc.® manufacture a truck or van crane
that actually stores down into its own bumper. The Sto-away Power
Crane ® can easily handle the bulkiest of loads. Sto-away ® replaces the
rear bumper and attaches directly to your truck/van's frame. The Sto-away
Power Crane ® requires no bed space, and needs no additional reinforcing,
and you don't need your truck/van's suspension modified either. Sto-away
Power Bumper Cranes ® are simple and easy to install and they come
complete with all of the necessary hardware needed.
The Sto-away Power Bumper Crane ® gives
you maximum versatility that you demand from your
pickup, truck, or van. By being a compact system
that enables a single truck owner to: have the
protection of a rear step bumper manufactured from
alloy structural steel plate and tubing, choice of
towing package, plus a Sto-away Power
Bumper Crane ® that can be erected in 10
seconds or less. Ready for one person to lift from
1,000 to 3,000 lbs. Cargo with a single push of a
button, and with that same push of a button be able
to command a rear mounted optional vehicle
winching system with up to 6,000 lb. Stall rating,
and an optional Osha compliant man rescue /
confined space system.
For just pennies a day you can have that
extra helper when you really need the help.
Your Sto-away ® is always there, always
ready for a faster, safer, and more efficient
way to get the job done.
In this day and age of
seemingly
uncontrollable
insurance costs the
Sto-away Power
Bumper Crane ®
provide the simple
safe and cost effective
way to control your
loss time injuries, and
increase your
profitability in turning
a two man job into a
safer effective one
man task.
The Sto-Away ® folding bumper crane that
stows away quickly: Can be set up in seconds
with NO tools, has its own, built-in outrigger
leg, operates by a hand held remote control
with lifting capacity from 1,000 lbs. To 3,000
lbs.
Heavy Duty Bumper
Heavy duty, bolt-on step bumper made from high
strength structural steel plate and tubing for storing the
crane.
Trailer Towing Packages
You have the ability to choose between towing
configurations; class 3 - 2" receiver with 5,000 lb.
Rating or 10,000 lb. Class 4 Face Plate Pintle hook
mount.
Confined Space / Man Lift Rescue
An optional package that is certified to comply
with all current OSHA and ANSI standards for man
rescue in confine space.
Since OSHA doesn’t certify
equipment;
NO One can say that
they are OSHA certified.
What they can say is that their
equipment and /or procedures is
OSHA compliant, and state
what regulation standards they
meet.
More information on the
optional packages that
Sto-away ®
has available below on
pages 54 - 61.
Some of the following
pictures show options:
if you are not sure
which are options
please call your dealer.
S R 2 A, S R 2 B, & S R 2C
Bumper Cranes
for Cargo Vans
The listed bumper cranes above
shall come standard with Metallic
Gray Powder Coat. Can be
requested to be Powder Coated
Black.
S R 2 A, S R 2 B, & S R 2C Bumper Cranes
1000# - 1500# - 2000# capacity units.
These bumper cranes will bolt-on and fit 1/2, 3/4 & 1 Ton
Chevy; Ford, and Dodge Cargo Vans with a standard
approximate width of 77".
S R 3, & S R 4 Bumper Cranes
1000# capacity units.
The SR 3©: bumper crane will bolt on for Chevy S-10/ GMC S-15 series;
Ford Ranger; Dodge Ram and Toyota Tundra with a standard bed of an
approximate width of 64” or 67”
The SR 4©: Bumper crane will bolt-on and fit 1/2, 3/4 & 1 ton Chevy;
Ford, Dodge Ram and Nissan Titan full size pick-up trucks with a
standard bed of an approximate width of 77 ½".
S R 5A & S R 5T Bumper Cranes
1500# - 2000# capacity units.
These bumper cranes will bolt on and fit full size Chevy
C/K series; Ford "F" series; Dodge Ram and Nissan
Titan and Sprinter Van with a standard bed of an
approximate width of 77".
SR6A & SR6T Bumper Cranes
1500# - 2000# capacity units.
These bumper cranes shall be a bumper replacement for a
1 ton Dual Wheel, Service Bodies, High Cube Van
Bodies, and Flat Beds with a standard bed of an
approximate width of 90". (94”, 96”, 102” and Custom
built width are available upon request.)
SR7 Bumper Crane
2500# capacity unit.
This bumper crane shall
bolt on and fit 9,600
G.V.W. or heavier trucks
a standard bed of an
approximate width of 78
½” (custom build 90”,
94”, 96”, 102” widths).
SR8 Bumper Crane
3000# capacity unit.
This bumper crane
shall be a bumper
replacement for a 1
ton Dual Wheel,
Service Bodies, High
Cube Van Bodies,
and Flat Beds with a
9,600 G.V.W. or
greater and a standard
width of 90". (94”
96”, 102” and Custom
built width’s available
upon request). Can
be requested for
Front Bumper.
ONLY Upon Request on the following
Bumper Cranes:
6A, SR6T, SR7 & SR8
Please Request an offset unit if your doors are like the picture
above on the left. This will allow you to lift inside of the truck.
If not requested it will come standard with the mast to the very
right like the picture above on the right.
OFFSET
STANDARD
Upon Request Only for ANY of the
Bumper Cranes:
Reversed Unit:
THE STANDARD BOOM SETS UP ON THE
PASSENGER SIDE OF VEHICLE - CAN REQUEST
A REVERSED UNIT WHICH THE BOOM WOULD
SET UP ON THE DRIVERS SIDE.
STANDARD
REVERSED
Upon Request Only for ANY of the
Bumper Cranes:
IF THE BUMPER CRANE WILL COVER THE EXISTING BACK UP
AND TAIL LIGHTS?
THE OPTIONAL LED BACKUP LIGHTS & LED TAIL LIGHTS -
WILL NEED TO BE REQUESTED AND ORDERED.
< Optional
LED BACKUP LIGHTS &
LED TAIL LIGHTS
Standard >
Upon Request Only for ANY of the
Bumper Cranes:
(360 degrees is available
upon request Only).
<The Standard Bumper
Cranes will be limited to
270 degrees in order to
protect both the interior
and the exterior walls of
the truck's bed/service
body.
Standard Features on the
Sto-away Power Cranes ®
NEW COATING PROCESS APPLIED
To make the bumper cranes more corrosive resistant Sto-Away
Power Cranes ® announces that they have begun applying an
ELECTRO-COAT to their bumper cranes. This process consists of
an 8 stage pretreatment which includes a full immersion in zinc
phosphate and sealer and provides excellent edge coverage. This
process is Dexter Chassis Group’s TTC 490 which has been certified
by TACOM (U.S. Army Tank and ARMAMENTS COMMAND) This
process also consists of an epoxy coating which provides 1,500 +
hours of salt and spray protection without the use of heavy metals. It
provides a more complete corrosion protection.
RECEIVER HITCH
SR2A, SR3, SR4 Series
Class 2 Receiver Hitch shall be built in the
bumper 3,500 lb. Pull / 500 lb. tongue weight.
SR2B-C, SR 5 - SR6, CSR 515-520, CSR 615-620 Series
Class 3 Receiver Hitch; 5000 lb. pull /
1000 lb. tongue weight shall be built-in.
SR7 - SR8, CSR725 Series
Class 4 Receiver Hitch; 10,000 lb. pull /
2,000 lb. tongue weight shall be built-in.
THE SR7 - SR8 - CSR-725(A)(B) - UNITS INCLUDE:
FEATHER LITE KIT – IS A STANDARD
FEATURE ONLY ON THE SR7 & SR8 Series
Bumper Cranes.
This option is a nitrogen cylinder assist that is
placed on the boom, and the bumper to allow the
crane to softly glide down in to the bumper,
instead of slamming down. It also makes the
crane and the boom easier to lift.
Brackets to up fit to the truck, wiring harness, all mounting
hardware, owners manual with install, operation, safety, parts, &
maintenance instructions.
Grease ports throughout all of the bearings and pulleys so
that the owner is able to grease their crane without actually
having to take the crane apart.
We have a twin inner core that keeps our cable from jumping off of
the pulley at the top of our boom.
We also use 3m reflective logos so they are visible at night time.
Water Tight Control Plug and Dust Cap
All Sto-away® Bumper Cranes come standard with the
weather tight non corrosive control plug with indicator light
showing “Power Up “unit. Weather resistance ON /OFF
toggle switch so you can Turn Off the power to the cranes
controls. Adding another level of Security and Safety. With
the water tight “O” ring sealed dust cover, the plug socket is
not exposed to the elements.
All Sto-away ®
bumper Cranes
come standard
with a hand
guard, which
protects the
operator from
getting into the
pinch point area
while setting up
the crane.
Plastic Hand Control
All Sto-away ®
Bumper Cranes come
standard with a hand
control.
Option Available:
Upgrade to a
Rubber Hand Control.
Standard Outrigger Leg
All Sto-away ® Bumper
Cranes come standard
with an outrigger leg
that bolts up under the
crane when not in use.
When using this leg you
need to leave about a 1
- 2 inch gap between
the ground and the
bottom of the leg so that
you can release it.
Two Boom Heights Settings
All Sto-away ® Bumper
Cranes come standard
with: Two Boom Heights Settings
Option available:
Third Boom Setting:
This option shall allow an
approximate maximum boom
height to a standard crane.
Galvanized
Cable
SR2A, SR3, SR4 Series
The hoist cable will be 7X19 galvanized
aircraft cable with a safety hook and
length will be from 25’.
SR2B-C, SR 5 - SR6,
CSR 515-520, CSR 615-620
SR7 - SR8, CSR725 Series
The hoist cable will be 7X19 galvanized
aircraft cable with a safety hook and
length will be 50’.
Options available:
Stainless Steel Cable and Hook:
Stainless steel cabling can be
supplied from 25' to 65'. (Up to 50’
for the SR2A, SR3, SR4 Series)
Galvanized Cable and Hook:
Galvanized aircraft cabling can be
supplied from 25' to 65'. (Up to 50’
for the SR2A, SR3, SR4 Series).
All Sto-away ®bumper Cranes
come standard with:
Premium Anti-Slip Surface
Premium Anti-Slip Surface is
added to the top of the
Sto-away’s bumper crane
surface to help prevent slipping
and falling when used as a step
bumper.
The lid is an option in this
picture, if the lid is not ordered
the Anti-Slip Surface is applied
to the top of the bumper.
7 Pin Socket Port
A hole cut into the face plate to accept the 7
pin trailer plug.
(Not standard on the SR2A, SR3, & SR 4)
B.L.G.L. Winch
(Positive Cable Attachment)
This option is a key Safety option that assure
positive cable attachment to a 3200 lb. Minimum
payload at the maximum extended cable reach for
Below Level Ground Lifting more than 5 feet
beneath the truck.
This option is a steel locking lid and
bottom panels that encloses the
bumper frame and protects the
winch drives from anything that
might come up from your wheels of
your truck or van.
Pictured left to right:
Powder Coated Steel lid (Is now
Gray Color).
The Aluminum Lid upgrade.
Stainless Steel Lid upgrade.
W.R.Kit
(Steel Locking Lid and Bottom Panels)
All of the Lid Top Covers are designed to pad
lock in order to have limited access to the
crane. This protects You from unqualified
personnel using the crane
CABLES
Stainless Steel Cable and Hook:
Stainless steel cabling can be
supplied from 25' to 65'. (Up to 50’
for the SR2A, SR3, SR4 Series)
Galvanized Cable and Hook:
Galvanized aircraft cabling can be
supplied from 25' to 65'. (Up to 50’
for the SR2A, SR3, SR4 Series).
FEATHER LITE KIT
This option is a
nitrogen cylinder
assist that is placed
on the boom, and the
bumper to allow the
crane to softly glide
down in to the
bumper, instead of
slamming down. It
also makes the crane
and the boom easier
to lift.
Posi-lock Mast
This option will enable the operator to lock the
crane into place every 22 ½ degrees throughout
its rotation and stay locked in position until the
lever is shifted and the operator has taken
control of the load.
ALUMINUM BOOM EXTENSION
The Aluminum Boom Extension
is an option available on most
models of the Sto-Away Power
Crane ®. This feature offers an
advantage in many lifting situations,
where it may be desired to have
additional reach or working height.
SR5 & SR6 Series: This option shall
extend the standard 48" reach to a 69"
reach from the truck.
SR7 & SR8 Series: This option shall
extend the standard 52" reach to a 76"
reach from the truck.
CAM LOCK OUTRIGGER LEG
(OPTIONAL LEG FOR EXTRA STABILITY)
This feature supersedes the standard
outrigger leg and extends to a maximum of
12" from the corner of the bumper. Extend
vertically a maximum of 24" from the bottom
of the crane, and can be set or released with
a single cam over center handle (similar to a
commercial chain binder).
You can order later if needed.
Except on
SR2A, SR3, SR4
Auxiliary Winch System
3 Auxiliary Winch System
to choose from. Reach 90
feet from the bumper with
a Single line stall rating of
3300 lb., 4200 lb., &
6000 lb. without the aid of
any pulley snatch blocks
This winch drive is
independent of the hoist
and come with a
freewheeling clutch lever
as standard equipment.
Built-In Face Plate Pintle
Mount-Class 4
Face Plate Pintle Mount is
an additional towing option
to the standard 2-inch
receiver hitch.
Pintle mount is built in and
reinforced within the
bumper frame. Designed
for the Class 4, up to
16,000 lb. towing
D Rings(Safety Chain-Towing)
This option allows easy mounting of
Safety Chains and they swivel to
give added Ground clearance.
Also shown is an "Eyes / Tabs" that
is part of the center cross members
that the 2" receiver tube is welded
to. This "Eyes / Tabs" are part at
the rear of every bumper crane
hitch system. These mounts are
standard feature. (Top left in photo)
By adding reinforcement bars from
this point, to a spot further back on
the Trucks frame you will increase
the towing capacity of hitch
LED Tail
&
LED Back Up Lights
Tail & Backup Lighting Kit is a Factory installed
Stop / Tail and Backup lights placed in the face of the
bumper. Great for walk-in van bodies and added
visibility for Road Crews.
We can make custom steps to
your specifications
Please contact us and let us know
what your application is calling for.
800-622-9797
Fax: 219-947-2503
www.stoaway.com
Confined Space / Man Lift Rescue
Optional CSR (series) A Packages:
CSR 215, 220,315,515, 520, 615, 620 & 725 A : will
consist of a 350 LB. Load limiter, that is placed on
the end of the boom, designed to stop the electrical
winch drive automatically when there is an excess of
350 LB. of weight \ pull on the power winches lifting line, a
manual cranking system that is attached to the electrical system
with fall protection built in, required so that if you loose power
you are still able to crank the person out of the manhole, a lock out
tag out steering wheel cover to be placed on the trucks steering
wheel with the words: DANGER DO NOT MOVE THIS VEHICLE
BEING USED IN CONFINED SPACE ENTRY, THIS COVER
MAY ONLY BE REMOVED BY AUTHORIZED PERSONNEL., An
Emergency override hand control is provided for emergency
situations when someone is down and you have to do a two
person rescue, and it also comes with a BLGL winch a positive
cable attachment so that if or when you get to the last wrap of the
cable it will do a reverse wrap and will not come off the drum. On a
standard winch you are only lifting from the ground up so it has 4 –
5 wraps of cable on the drum. To comply to OSHA and ANSI
standards you must have everything that is listed in the A
package along with the standard features.
Confined Space / Man Lift Rescue
Optional CSR (series) B Packages:
All CSR (series) B PKG.: will consist of a 350 LB. Load limiter, that is placed on the end of the boom,
designed to stop the electrical winch drive automatically when there is an excess of 350 LB. of weight \ pull on
the power winches lifting line, a lock out tag out steering wheel cover to be placed on the trucks steering
wheel with the words: DANGER DO NOT MOVE THIS VEHICLE BEING USED IN CONFINED SPACE
ENTRY, THIS COVER MAY ONLY BE REMOVED BY AUTHORIZED PERSONNEL., An Emergency
override hand control is provided for emergency situations when someone is down and you have to do a two
person rescue, and it also comes with a BLGL winch a positive cable attachment so that if or when you
get to the last wrap of the cable it will do a reverse wrap and will not come off the drum. YOU MUST HAVE A
FACTORY APPROVED MANUAL cranking system WITH FALL PROTECTION BUILT IN to be able to
order this package.
Features that are included to only the:
CSR (series) A Packages:
CSR (series) B Packages:
W.R. Kit *: This feature is a steel locking lid and bottom panels that encloses the bumper frame and
protects the winch drives from anything that might come up from your wheels of your truck.
Posi-Lock Mast: This feature will enable the operator to lock the crane into place every 22 ½ degrees
throughout its rotation and stay locked in position until the lever is shifted and the operator has taken control
of the load.
B.L.G.L. Winch: This feature is needed for doing ANY below ground lifting. We prepare the winch to have
a positive cable attachment if you were to get to the last wrap of cable it would do a reverse wrap and will
not come off the drum.
FEATHER LITE KIT: This feature is a nitrogen cylinder assist that is placed on the boom, and the bumper
to allow the crane to softly glide down in to the bumper, instead of slamming down. It also makes the crane
and the boom easier to lift.
CAM LOCK OUTRIGGER LEG: (OPTIONAL LEG FOR EXTRA STABILITY)
Third Boom Setting: This feature shall allow an approximate maximum boom height to a standard crane.
Confined Space / Man Lift Rescue
Optional CSR SET UP: Packages:
This package is only the mast and the boom prepared to accept the confined space pkg. at a
later date. (If not ordered when ordering crane you will have to ship back the crane and
mast and possibly the winch to be able to add this later.)
Some cities order this when they do not have enough in their budget for the entire confined
space pkg. And they know they will want to add it later.
NOTE: The following options must be ordered in order for this package to be complete:
B.L.G.L. winch:
This option is needed for doing ANY below ground lifting. We prepare the winch to have a positive cable
attachment, if you were to get to the last wrap of cable it would do a reverse wrap and will not come off the
drum. On the standard winch the cable is only on there with a set screw which is fine for lifting from the
ground up, because you always have 4-5 wraps of cable left on the drum. This is a safety feature that will
keep you from losing your expensive equipment off of the end of the cable if you were to get to the last wrap
of the cable
Posi-Lock Mast:
This option will enable the operator to lock the crane into place every 22 ½ degrees throughout its rotation
and stay locked in position until the lever is shifted and the operator has taken control of the load
Sto-away’s CSR Units are OSHA compliant!
OSHA certifies NOTHING.
They are a regulatory branch of the federal government. OSHA sets the minimum
standards that must be meant for occupational health and safety in work places
within the United States. OSHA can and will fine a company and may shut down the
company if they do not meet these standards.
Since OSHA doesn’t certify equipment; NO One can say that they are OSHA
certified.
What they can say is that their equipment and /or procedures is OSHA compliant,
and state what regulation standards they meet.
OSHA clearly states that NO CRANE can be used to lift personnel, it doesn’t matter
if it is powered or a manual hand crank, Period. Cranes have no safe guards for
protecting the worker from being pulled apart. Without a load limiting system on the
hoist you can’t use it. It only makes sense; a crane is designed to lift to its maximum
capacity and nothing less.
How does the Sto-Away ® address this OSHA standard?
There are manual hand powered retrieval systems in use today that use a slip
clutch or special gear reductions and or both to control the maximum lifting force
that is placed on the worker. This is how these manufactures comply with the
OSHA standards.
The current Tripod systems are a good example of this.
Sto-Away’s Confined space package complies with the OSHA standards by
developing a special load cell system that pins to the Sto-Away’s davit* arm’s
tip and can measure the amount of lifting force the hoist is exerting at the hook.
Thus achieving the same end results as a slip clutch or special gear reductions
of the tripods.
At 350 lbs. or less the load cell shuts down the upward movement of the hoist
thus protecting the worker.
The best way to protect yourself and your employees is with knowledge. I
strongly recommend that you visit OSHA.org and your own state’s OSHA site
for more information.
Learn – evaluate – then invest.
* A Davit arm system is an alternative to a Tripod for manhole entry.
STO-AWAY POWER CRANES, INC. ®, is a Manufacturing company established since 1982, we are considered
to be the leader of all bumper cranes due to our common sense in the engineering and its 4 part
foundation in its design. We offer many standard features that are unique only to STO-AWAY POWER
CRANES, INC. ®
I would like to explain how STO-AWAY POWER CRANE'S are different from the rest for
RESCUE, and CONFINED SPACE applications.
STO-AWAY POWER CRANES, INC.® ARE IN CONFORMANCE WITH THE FOLLOWING STANDARDS ANSI-
Z117.1 AMERICAN NATIONAL STANDARD (SAFETY REQUIREMENTS FOR CONFINE SPACE) ANSI-
Z359.1 (ELEMENTS AND COMPONENTS USED IN PERSONNEL FALL ARREST SYSTEMS) OSHA-1910.66
OCCUPTIONAL SAFETY AND HEALTH ADMINISTRATION (ANCHORING POINTS) OSHA-1926.502
(POSITIONING SYSTEMS) NIOSHA-80-106 (WORKING IN CONFINED SPACES) UL-1523 UNITED
LABORATORIES (BREAKING POINTS)
POSITIVE CABLE ATTACHMENT: We design our Below Level Ground Lifting winches to meet our
safety needs. Meaning when you get to the end of the cable on the drum, the cable will then just
reverse wrap.
Therefore you will NEVER lose the cable off of the end of the drum on Our B.L.G.L. winch drives.
MAN-SAVER & FALL PROTECTOR: Our system is designed with the safety of your personnel in
mind. It is a DOUBLE LINE SYSTEM, meaning 2 LIFELINES. One of them being an electrical
winching system, and the other a manual hand cranking system so if the power fails, you have a
BACKUP manual system to rely upon. Our system is also equipped with a fall protection device that
only allows the personnel to fall 2 (two) feet or less.
350 LB. LOADLIMITER: The LOADLIMTER is designed to stop the electrical winch drive
automatically when there is an excess of 350 LB.* of weight \ pull on the power winch’s lifting line.
Factory pre setting
When specifying any bumper crane for Confined Space work, that needs to conform to OSHA &
ANSI standards, the following would need to be ordered:
Any MODEL Sto-Away Power Crane ® with at least a 1,500lb. Lifting capacity, B.L.G.L. winch,
Posi-lock mast, W.R. kit, Cam Lock outrigger leg, and Confined space Package A (350 LB.*
LOADLIMTER, Man Saver with built-in fall protection, and needed hardware) or Package B could be
ordered only if you have a factory approved SRL lifeline. See factory for details on package B
We do have our specs listed on
our website and you can find
some of our safety features on
there also.
Please check out our website
www.stoaway.com.
Please call or e-mail if you
would like further information,
or a quote prepared, on a
Sto-away Bumper Cranes ®,
our sales department is here to
assist you on all of your lifting
needs.
800-622-9797 / 219-942-9797
Fax 219-947-2503
We also have presentations on the
following:
*Instructions on setting up the
Crane.ppt
* Properly Installing & Inspecting
the Confined Equipment.ppt