OPERATOR FOR OVERHEAD GARAGE DOORS UP TO 14 M² (150 FT²)

Emega

Medium to Large Garage Doors Emega is designed for intense heavy duty work on medium-to-large overhead garage doors up to 14 m² (150 ft²). It is ideal also for low-ceiling garages or ones with reduced transoms.

Dimensions (mm)If you need to power a very large garage door, or one fitted with a pedestrian door, you will need to fit two motors

512

165

128

Photocell

Photocell

SURFACEMOUNTED SELECTOR

LOW CONSUMPTION LED FLASHING LIGHT

Benefits become solutions.

Read up at came.com on the entire range of Came products! Came is a leading home automation, industrial and special plant technology projects manufacturing company. A full range of household solutions: from operators for gates and garage doors, to shutter and awning winding motors, and even home automation control, to burglar proof and video entry systems.Technology and reliability to serve your business, thanks to solutions designed for powering large industrial doors, automatic doors, street barriers, turnstiles, access controls and parking facilities.

Guaranteed by 24 Volts Systems running at 24 Volts are super safe to use and very reliable under intense working conditions, such as those found at residential apartment complexes and industrial facilities. Moreover, 24 Volt systems work even during power outages, thanks to the optional batteries.

EN TESTED safety An electromechanical EN TESTED branded system always ensures safe controlled operation of moving doors, in compliance with current legislative standards in terms of impact forces.

IT ADAPTS TO ANY NEED The ways of mounting Emega may change depending on the type of door or installation needs: with one motor installed centrally or laterally, or with two motors, installed laterally. A pedestrian door fitted directly into the overhead one is not a problem, as also in this case the operator integrates perfectly and in total safety.

TOTAL CONTROL• The 24 V DC electronics is for adjusting the speed of maneuvering and

for the door's silent final approach.• Practical user-friendly built-in release lever for manually opening the

garage door during power outages - even from outside using the door handle itself.

• Self-diagnosing safety devices, such as photocells, before every movement (model E1024).

• Immediate door movement stop via remote control.

Applications

Partially retracting protruding overhead door

Fully retracting protruding overhead door

Fully retracting protruding overhead door

Fully retracting non-protruding overhead door

MODEL E456 E1024 E306

IP protection rating 50 50 50

Power supply (V - 50/60 Hz) 230 AC 230 AC 230 AC

Motor power supply (V) 230 AC 50/60 Hz 24 DC 230 AC 50/60 Hz

Draw (A) 2 15 Max. 2

Power (W) 200 180 190

Maneuvering time at 90° (s) 25 ADJUSTABLE 25

Duty cycle (%) 50 INTENSIVE USE 50

Torque (Nm) 420 450 300

Operating temperature (°C / °F) -20 ÷ +55 / -4 ÷ +131 -20 ÷ +55 / -4 ÷ +131 -20 ÷ +55 / -4 ÷ +131

Motor's heat protection (°C / °F) 150 ÷ 302 - 150 ÷ 302

230 V AC 24 V DC

MODEL E306 E456 E1024 E1024

CONTROL PANEL ZE5 ZL170N ZL19NA

SAFETY FEATURES

SELF-DIAGNOSING safety devices

PREFLASHING while opening or closing

REOPEN while closing

TOTAL STOP

PARTIAL STOP

OBSTRUCTION DETECTED in front of photocells

Device for CONTROLLING MOVEMENT and DETECTING ANY OBSTRUCTIONS

AMPEROMETRIC DETECTION

CONTROL FEATURES

OPEN ONLY from transmitter and/or button

OPEN ONLY or CLOSE ONLY button connection

OPEN-STOP-CLOSE-STOP from transmitter and/or from button

OPEN-CLOSE-INVERSION from transmitter and/or from button

MAINTAINED ACTION

CHARACTERISTICS AND ADJUSTMENTS

FLASHING LIGHT connection

CYCLE LAMP connection

COURTESY LAMP connection

Antenna

GATE OPEN FLASHING LIGHT connection

Contact output for 2nd RADIO CHANNEL

OPERATING TIME adjustment

SELF-LEARNING of the transmitter's RADIO CODE

ELECTROLOCK/ELECTROBLOCK and/or ANTI RAMMING connection

Adjustable AUTOMATIC RECLOSING TIME

OPENING and/or CLOSING slow down

EMERGENCY BATTERY operation (optional)

Adjustable GATE TRAVEL and SLOW DOWN speeds

SELF-LEARNING opening and closng limit-switches

230 V AC 24 V DC

CUSTOMIZED ELECTRONICS FOR YOUR NEEDS! Emega is available in both the 230 V AC and 24 V DC versions. The table shows the main characteristics of the control panels, matched to the gearmotors.

LIMITS TO USE (DOORSURFACE)

9 m² 96.8 ft²

E306 E456 E1024

14 m² 150 ft²

E456 E1024

230 V AC 24 V DC

Note: 001E782A always install when fitting a 001E1024 double gearmotor

Came S.p.A. is Quality and Environmentally

certified byUNI EN ISO 9001UNI EN ISO 14001

100%

MAD

E IN ITALY CERTIFICATE

ITP I . 3 86

GARANZIA QUALITÀ ORIGINALE

Came productsare entirely designedand made in ITALY

Came is a company of

SOME VERSIONS MAY NOT BE AVAILABLE IN YOUR COUNTRY. FOR MORE INFORMATION PLEASE SPEAK TO YOUR LOCAL LICENSED DEALER.

© CAME SPA - KDEP#CEN10A3S114 - JAN_2014 - EN Even partial reproduction is prohibited • CAME reserves the right to make changes to this document at any time

Came S.p.A.

Via Martiri della Libertà, 15 Dosson di Casier Treviso - Italy www.came.com