Embed Size (px)
Citation preview
For Removing Crash data and any stored DTC in the SRS modules, you will need special tools to support different cars made/models, those tools can connect to the SRS modules, either Via OBD or by wiring connections on-board, the problem here you will need to buy many tools to support the whole cars (SRS modules) of your interest and this costs too much money and sometimes you will not find the right tools that fit your needs. Our Airbag software package can help you to solve this problem, since all you need is a good serial programmer to read and save the memory device's dump file of the SRS modules on-board, or via OBD by using a serial K-Line cable, and then, open the saved airbag dump file in any of our airbag software (according to the Vehicle made/model and SRS ID) then run the CLEAN command and save a clean dump file to be written back to the storage device of the relative SRS module by using the Serial programmer, plug the SRS module to the car and clean any existed DTCs by a diagnostic tool, then, airbag warning light will go off and Job Done. We can always provide you with all your needs from Hardware or Software to support all the vehicles of your interest for Airbag resetting and removing crash data functions, so if you don't know exactly what Tools and Programs you have to buy for your work, then just contact us to tell us your needs in details, then we will reply to you ASAP, with our best recommendations and optimum solutions. Now, Scroll down to select Airbag Resetting Software programs of your interest, then e-mail us with your order, (Please always browse by the Item # and send to us all the Item Numbers of your interest to reply to you with the total cost and the payment procedure).
Let us know if you have any QUESTIONS
All orders Via E-mails only
CONTACT ... US
www.OBDbytes.webs.com
www.OBDOBP.webs.com
