PSoC Development Kit v1.0 - Quck Start Guide

PSoC 3 Development Kit, Ver 1.0 Quick Start Guide

© 2012 Tinychip Embedded Solutions. All Rights Reserved. All trademarks or registered trademarks referred herein are the properties of their respective owners.

© 2012 Tinychip Embedded Solutions. All Rights Reserved. All trademarks or registered trademarks referred herein are the properties of their respective owners.

Insert the PSoC 3 Development Kit, Ver 1.0 Installation DVD in the DVD drive of your PC

Install the kit contents , PSoC Creator and PSoC Programmer

© 2012 Tinychip Embedded Solutions. All Rights Reserved. All trademarks or registered trademarks referred herein are the properties of their respective owners.

Remove the PSoC 3 Development Kit, Ver 1.o from its package ; and connect the jumper JP3 as shown

Also ensure that the switches on the switch box are inactive

© 2012 Tinychip Embedded Solutions. All Rights Reserved. All trademarks or registered trademarks referred herein are the properties of their respective owners.

Connect the LCD MODULE as shown

© 2012 Tinychip Embedded Solutions. All Rights Reserved. All trademarks or registered trademarks referred herein are the properties of their respective owners.

Connect one end of the USB cable to the PSoC 3 Development Board as shown, and the other end of the USB cable to the USB port in your PC

Observe the Power LED turn on

© 2012 Tinychip Embedded Solutions. All Rights Reserved. All trademarks or registered trademarks referred herein are the properties of their respective owners.

Observe “ PSU Check OK” displayed on the LCD

© 2012 Tinychip Embedded Solutions. All Rights Reserved. All trademarks or registered trademarks referred herein are the properties of their respective owners. For latest updates on this product visit http://www.tinychip.co/products/

PSoC 3 Development Kit, Ver 1.0, Details